summaryrefslogtreecommitdiff
path: root/ps2_vusb/usbconfig.h
diff options
context:
space:
mode:
Diffstat (limited to 'ps2_vusb/usbconfig.h')
-rw-r--r--ps2_vusb/usbconfig.h12
1 files changed, 7 insertions, 5 deletions
diff --git a/ps2_vusb/usbconfig.h b/ps2_vusb/usbconfig.h
index abc31ced5..34807066f 100644
--- a/ps2_vusb/usbconfig.h
+++ b/ps2_vusb/usbconfig.h
@@ -11,6 +11,8 @@
#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__
+#include "config.h"
+
/*
General Description:
This file is an example configuration (with inline documentation) for the USB
@@ -27,7 +29,7 @@ section at the end of this file).
/* This is the port where the USB bus is connected. When you configure it to
* "B", the registers PORTB, PINB and DDRB will be used.
*/
-#define USB_CFG_DMINUS_BIT 4
+#define USB_CFG_DMINUS_BIT 3
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
* This may be any bit in the port.
*/
@@ -216,7 +218,7 @@ section at the end of this file).
/* -------------------------- Device Description --------------------------- */
-#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
/* USB vendor ID for the device, low byte first. If you have registered your
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
@@ -225,7 +227,7 @@ section at the end of this file).
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
-#define USB_CFG_DEVICE_ID 0xdd, 0x05 /* = 0x05dc = 1500 */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise
@@ -249,8 +251,8 @@ section at the end of this file).
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
-#define USB_CFG_DEVICE_NAME 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd'
-#define USB_CFG_DEVICE_NAME_LEN 8
+#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
+#define USB_CFG_DEVICE_NAME_LEN 23
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
* you use a shared VID/PID.