summaryrefslogtreecommitdiff
path: root/keyboard/planck/planck.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/planck/planck.c')
-rw-r--r--keyboard/planck/planck.c16
1 files changed, 6 insertions, 10 deletions
diff --git a/keyboard/planck/planck.c b/keyboard/planck/planck.c
index da7b3a170..f1a76266e 100644
--- a/keyboard/planck/planck.c
+++ b/keyboard/planck/planck.c
@@ -19,10 +19,6 @@ void matrix_init_kb(void) {
backlight_init_ports();
#endif
-#ifdef RGBLIGHT_ENABLE
- rgblight_init();
-#endif
-
// Turn status LED on
DDRE |= (1<<6);
PORTE |= (1<<6);
@@ -61,20 +57,20 @@ void backlight_init_ports()
// Setup PB7 as output and output low.
DDRB |= (1<<7);
PORTB &= ~(1<<7);
-
- // Use full 16-bit resolution.
+
+ // Use full 16-bit resolution.
ICR1 = 0xFFFF;
// I could write a wall of text here to explain... but TL;DW
// Go read the ATmega32u4 datasheet.
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-
+
// Pin PB7 = OCR1C (Timer 1, Channel C)
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
// (i.e. start high, go low when counter matches.)
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-
+
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
@@ -100,7 +96,7 @@ void backlight_set(uint8_t level)
// Set the brightness
CHANNEL = 0xFFFF;
}
- else
+ else
{
// Turn on PWM control of PB7
TCCR1A |= _BV(COM1C1);
@@ -303,4 +299,4 @@ ISR(TIMER1_COMPA_vect)
-#endif \ No newline at end of file
+#endif