summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--m0110.c79
-rw-r--r--m0110.h42
-rw-r--r--m0110_usb/README55
-rw-r--r--m0110_usb/README.md141
-rw-r--r--m0110_usb/config.h5
-rw-r--r--m0110_usb/keymap.c148
-rw-r--r--m0110_usb/matrix.c3
-rw-r--r--rules.mk9
8 files changed, 354 insertions, 128 deletions
diff --git a/m0110.c b/m0110.c
index 522c3ec0d..68ce2d1c5 100644
--- a/m0110.c
+++ b/m0110.c
@@ -34,6 +34,7 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
+/* M0110A Support was contributed by skagon@github */
#include <stdbool.h>
#include <avr/io.h>
@@ -43,6 +44,8 @@ POSSIBILITY OF SUCH DAMAGE.
#include "debug.h"
+static inline uint8_t inquiry(void);
+static inline uint8_t instant(void);
static inline void clock_lo(void);
static inline void clock_hi(void);
static inline bool clock_in(void);
@@ -106,6 +109,23 @@ KEY EVENT:
Moreover, the numpad keys =, /, * and + are preceded by shift-down 0x71 on press and shift-up 0xF1 on release.
So, the data transferred by nupmad 5 is "79 2F" whereas for numpad + it's "71 79 0D".
+ARROW KEYS:
+ Arrow keys and Pad+,*,/,=(Calc keys) share same byte sequence and its preceding byte
+ 0x71 and 0xF1 means press and release event of SHIFT. These cause very confusing situation.
+ It is difficult or impossible to tell Calc key from Arrow key with SHIFT in some cases.
+
+ Raw key events:
+ press release
+ ---------------- ----------------
+ Left: 0x79, 0x0D 0x79, 0x8D
+ Right: 0x79, 0x05 0x79, 0x85
+ Up: 0x79, 0x1B 0x79, 0x9B
+ Down: 0x79, 0x11 0x79, 0x91
+ Pad+: 0x71, 0x79, 0x0D 0xF1, 0x79, 0x8D
+ Pad*: 0x71, 0x79, 0x05 0xF1, 0x79, 0x85
+ Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B
+ Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91
+
SCAN CODE:
m0111_recv_key() function returns follwing scan codes instead of raw key events.
Scan codes are 1 byte long and bit7 is set when key is released.
@@ -275,15 +295,62 @@ ERROR:
uint8_t m0110_recv_key(void)
{
- uint8_t key;
+ static uint8_t keybuf = 0x00;
+ uint8_t key, key2, key3;
+
+ if (keybuf) {
+ key = keybuf;
+ keybuf = 0x00;
+ return key;
+ }
+ key = instant(); // Use INSTANT for better response. Should be INQUIRY ?
+ switch (key) {
+ case M0110_KEYPAD:
+ // Pad/Arrow keys
+ return (M0110_RAW2SCAN(instant()) | M0110_KEYPAD_OFFSET);
+ break;
+ case M0110_SHIFT_MAKE:
+ case M0110_SHIFT_BREAK:
+ key2 = instant();
+ if (key2 == M0110_KEYPAD) {
+ key3 = instant();
+ switch (key3) {
+ case M0110_ARROW_UP:
+ case M0110_ARROW_DOWN:
+ case M0110_ARROW_LEFT:
+ case M0110_ARROW_RIGHT:
+ // Calc keys
+ return (M0110_RAW2SCAN(key3) | M0110_CALC_OFFSET);
+ default:
+ // Shift + Pad/Arrow keys
+ keybuf = M0110_RAW2SCAN(key3);
+ return (M0110_RAW2SCAN(key) | M0110_KEYPAD_OFFSET);
+ }
+ } else {
+ // Shift + other keys
+ keybuf = M0110_RAW2SCAN(key2);
+ return M0110_RAW2SCAN(key);
+ }
+ break;
+ default:
+ // other keys
+ return M0110_RAW2SCAN(key);
+ break;
+ }
+}
+
+
+static inline uint8_t inquiry(void)
+{
m0110_send(M0110_INQUIRY);
- key = m0110_recv();
- if (key == 0xFF || key == M0110_NULL)
- return M0110_NULL;
- else
- return M0110_RAW2SCAN(key);
+ return m0110_recv();
}
+static inline uint8_t instant(void)
+{
+ m0110_send(M0110_INSTANT);
+ return m0110_recv();
+}
static inline void clock_lo()
{
diff --git a/m0110.h b/m0110.h
index 287c45b54..39da4ad66 100644
--- a/m0110.h
+++ b/m0110.h
@@ -54,23 +54,39 @@ POSSIBILITY OF SUCH DAMAGE.
# error "M0110 data port setting is required in config.h"
#endif
-#define M0110_INQUIRY 0x10
-#define M0110_INSTANT 0x14
-#define M0110_MODEL 0x16
-#define M0110_TEST 0x36
-
-#define M0110_PAD 0x79
-#define M0110_NULL 0x7B
-#define M0110_TEST_ACK 0x7D
-#define M0110_TEST_NAK 0x77
-
+/* Commands */
+#define M0110_INQUIRY 0x10
+#define M0110_INSTANT 0x14
+#define M0110_MODEL 0x16
+#define M0110_TEST 0x36
+
+/* Response(raw byte from M0110) */
+#define M0110_NULL 0x7B
+#define M0110_KEYPAD 0x79
+#define M0110_TEST_ACK 0x7D
+#define M0110_TEST_NAK 0x77
+#define M0110_SHIFT_MAKE 0x71
+#define M0110_SHIFT_BREAK 0xF1
+#define M0110_ARROW_UP 0x1B
+#define M0110_ARROW_DOWN 0x11
+#define M0110_ARROW_LEFT 0x0D
+#define M0110_ARROW_RIGHT 0x05
+
+/* This inidcates no response. */
+#define M0110_ERROR 0xFF
/* scan code offset for keypad and arrow keys */
#define M0110_KEYPAD_OFFSET 0x40
-#define M0110_ARROW_OFFSET 0x60
+#define M0110_CALC_OFFSET 0x60
/* convert key event raw response into scan code */
-#define M0110_RAW2SCAN(key) ((key&(1<<7)) | ((key&0x7F)>>1))
+#define M0110_RAW2SCAN(key) ( \
+ (key == M0110_NULL) ? M0110_NULL : ( \
+ (key == M0110_ERROR) ? M0110_ERROR : ( \
+ ((key&0x80) | ((key&0x7F)>>1)) \
+ ) \
+ ) \
+)
extern uint8_t m0110_error;
@@ -80,5 +96,7 @@ void m0110_init(void);
uint8_t m0110_send(uint8_t data);
uint8_t m0110_recv(void);
uint8_t m0110_recv_key(void);
+uint8_t m0110_inquiry(void);
+uint8_t m0110_instant(void);
#endif
diff --git a/m0110_usb/README b/m0110_usb/README
deleted file mode 100644
index 6ef98757a..000000000
--- a/m0110_usb/README
+++ /dev/null
@@ -1,55 +0,0 @@
-M0110 to USB keyboard converter
-===============================
-This firmware converts the protocol of Apple Macintosh keyboard M0110 into USB.
-
-
-Connection
-----------
-You need 4P4C plug and cable to connect Teensy into M0110.
-Teensy port F0 is assigned for CLOCK line and F1 for DATA by default, you can change pin configuration with editing config.h..
-
-Plug:
- http://en.wikipedia.org/wiki/Modular_connector#4P4C
-
-Pinout:
- http://www.kbdbabel.org/conn/kbd_connector_macplus.png
- 1(Black): GND
- 2(Red): CLOCK
- 3(Green): DATA
- 4(Yellow): +5V
-
-
-
-Build Frimware
---------------
-Optionally edit Makefile and config.h for build options, pin configuration or MCU.
-
-$ cd m0110_usb
-$ make
-and program your Teensy with loader.
-
-
-
-Keymap
-------
-You can change a keymap by editing code of keymap.c like following.
-How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h.
-
-This is a default keymap for M0110.
-,---------------------------------------------------------.
-| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa|
-|---------------------------------------------------------|
-|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
-|---------------------------------------------------------|
-|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return|
-|---------------------------------------------------------|
-|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
-`---------------------------------------------------------'
- |Opt|Alt | Space |Alt |Opt|
- `-----------------------------------------------'
-
-
-Notes
------
-
-EOF
diff --git a/m0110_usb/README.md b/m0110_usb/README.md
new file mode 100644
index 000000000..a948af91b
--- /dev/null
+++ b/m0110_usb/README.md
@@ -0,0 +1,141 @@
+M0110/M0110A to USB keyboard converter
+======================================
+This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
+Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
+you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
+
+![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg)
+
+M0110A support was contributed by [skagon@github](https://github.com/skagon).
+
+
+
+Connection
+----------
+You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
+Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
+you can change pin configuration with editing *config.h*.
+
+You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
+while Macintosh keyboard cable is *straight*.
+
+[![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg)
+
+In this pic:
+
+1. `GND`(Black)
+2. `CLOCK`(Red)
+3. `DATA`(Green)
+4. `+5V`(Yellow)
+
+Not that wire colors may vary in your cable.
+
+
+### Pinout
+- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
+- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
+
+![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
+
+
+### Pull-up Registor
+You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
+when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
+In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
+
+
+
+Building Frimware
+-----------------
+To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
+You can edit *Makefile* and *config.h* to change compile options and pin configuration.
+
+ $ git clone ... (or download source)
+ $ cd m0110_usb
+ $ make
+
+and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
+
+
+
+Keymap
+------
+You can change keymaps by editing *keymap.c*.
+
+### M0110
+#### *Default*
+ ,---------------------------------------------------------.
+ | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs|
+ |---------------------------------------------------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ |---------------------------------------------------------|
+ |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return|
+ |---------------------------------------------------------|
+ |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
+ `---------------------------------------------------------'
+ |Ctr|Alt | Space |Gui |Ctr|
+ `-----------------------------------------------'
+ You can register Esc by hitting(press&release) Fn0 quickly.
+
+#### *HHKB/WASD cursor Layer(Fn0)*
+ ,---------------------------------------------------------.
+ |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet|
+ |---------------------------------------------------------|
+ |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \|
+ |---------------------------------------------------------|
+ |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return|
+ |---------------------------------------------------------|
+ |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shift |
+ `---------------------------------------------------------'
+ |Ctr|Alt | Space |Gui |Ctr|
+ `-----------------------------------------------'
+
+### M0110A
+#### *Default*
+ ,---------------------------------------------------------. ,---------------.
+ | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *|
+ |---------------------------------------------------------| |---------------|
+ |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
+ |-----------------------------------------------------' | |---------------|
+ |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
+ |---------------------------------------------------------| |---------------|
+ |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
+ |---------------------------------------------------------| |-----------|Ent|
+ |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| |
+ `---------------------------------------------------------' `---------------'
+#### *HHKB/WASD cursor Layer(Fn0)*
+ ,---------------------------------------------------------. ,---------------.
+ |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
+ |---------------------------------------------------------| |---------------|
+ |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -|
+ |-----------------------------------------------------' | |---------------|
+ |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +|
+ |---------------------------------------------------------| |---------------|
+ |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| |
+ |---------------------------------------------------------| |-----------|Ent|
+ |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| |
+ `---------------------------------------------------------' `---------------'
+
+
+
+Debug
+-----
+You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
+
+The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help.
+These function is totally undocumented, tentative, inconsistent and buggy.
+
+
+
+Arrow Keys
+----------
+Dedicated arrow keys of the M0110A are transmitting the same scancodes as the keypad but also,
+its [=], [/], [*] and [+] keys (hereafter referred to as "calc" keys) are not assigned new
+scancodes but, instead, transmit a sequence of scancodes which emulates the [Shift] key press,
+followed by the same scancode sequence of the arrow keys!
+The problem with that approach is that, while in most cases it's easy to distinguish between
+a user-generated [Shift] key event (press or release) followed by an arrow or a calc key and
+a simulated [Shift] key event generated upon a calc key event, when the user is typing fairly
+fast, it is possible that the two events become indistinguishable, and produce undesired results
+-- nothing major, though, just one or two stray characters or cursor movements; it will NOT
+format your drives, kill your cat or make your wife run away with the pizza boy.
diff --git a/m0110_usb/config.h b/m0110_usb/config.h
index c12e0738d..de20d7c88 100644
--- a/m0110_usb/config.h
+++ b/m0110_usb/config.h
@@ -30,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* matrix size */
-#define MATRIX_ROWS 8
+#define MATRIX_ROWS 14
#define MATRIX_COLS 8
/* Locking Caps Lock support */
@@ -38,8 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key combination for command */
#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
+ keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) \
)
diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c
index bbb699a9a..8c509a59b 100644
--- a/m0110_usb/keymap.c
+++ b/m0110_usb/keymap.c
@@ -14,10 +14,8 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+/* M0110A Support was contributed by skagon@github */
-/*
- * Keymap for ADB keyboard
- */
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
@@ -31,16 +29,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-// TODO: layout for M0110A
-/* M0110 */
#define KEYMAP( \
- K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, \
- K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, \
- K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, \
- K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, \
- K3A,K37, K31, K34 \
+ K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \
+ K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \
+ K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \
+ K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \
+ K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \
) { \
{ KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
{ KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
@@ -49,7 +43,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
{ KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
{ KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO, KB_NO, KB_##K37 }, \
- { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO } \
+ { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
+ { KB_NO, KB_##K41, KB_##K42, KB_NO, KB_NO, KB_NO, KB_##K46, KB_##K47 }, \
+ { KB_##K48, KB_NO, KB_NO, KB_NO, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \
+ { KB_NO, KB_NO, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+ { KB_##K58, KB_##K59, KB_NO, KB_##K5B, KB_##K5C, KB_NO, KB_NO, KB_NO }, \
+ { KB_NO, KB_NO, KB_##K62, KB_NO, KB_NO, KB_NO, KB_##K66, KB_NO }, \
+ { KB_##K68, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K6D, KB_NO, KB_NO }, \
}
@@ -68,9 +68,14 @@ static const uint8_t PROGMEM fn_layer[] = {
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
// See layer.c for details.
static const uint8_t PROGMEM fn_keycode[] = {
- KB_SCOLON, // Fn0
- KB_SLASH, // Fn1
+ KB_ESC, // Fn0
+#ifdef HASU
+ KB_SCOLON, // Fn1
+ KB_SLASH, // Fn2
+#else
+ KB_NO, // Fn1
KB_NO, // Fn2
+#endif
KB_NO, // Fn3
KB_NO, // Fn4
KB_NO, // Fn5
@@ -79,52 +84,97 @@ static const uint8_t PROGMEM fn_keycode[] = {
};
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- // LShift and RShift are logically same one button.
- // LOption and ROption are logically same one button.
- /* Default Layer: plain keymap
- * ,---------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa|
- * |---------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |---------------------------------------------------------|
- * |Contro| A| S| D| F| G| H| J| K| L|Fn0| '|Return|
- * |---------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,|Fn1| Shift|
- * `---------------------------------------------------------'
- * |Fn2|Alt | Space |Gui |Fn2|
- * `-----------------------------------------------'
+ /*
+ * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
+ * of the M0110 keyboard, with only one exception: the right Alt key(Enter in M0110) does not exist
+ * on the M0110A, but since it generates a unique scan code which is not used for some other key in
+ * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost)
+ * identical to the combination of the M0110 along with the M0120 keypad. The only difference
+ * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
+ * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
+ * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
+ * substituted the [comma] key with the [=] key, however its scancode is the same.
+ *
+ * Default:
+ * ,---------------------------------------------------------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *|
+ * |---------------------------------------------------------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
+ * |-----------------------------------------------------' | |---------------|
+ * |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Ctrl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| |
+ * `---------------------------------------------------------' `---------------'
+ * You can register Esc by hitting(press&release) Fn0 quickly.
+ *
+ * HHKB/WASD cursor Layer(Fn0):
+ * ,---------------------------------------------------------. ,---------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
+ * |---------------------------------------------------------| |---------------|
+ * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -|
+ * |-----------------------------------------------------' | |---------------|
+ * |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | 0| .| |
+ * `---------------------------------------------------------' `---------------'
+ *
+ * NOTE: Key between Space and \ in above diagram is M0110 Enter(assigned to Gui).
+ * NOTE: LShift and RShift are logically same key. (M0110, M0110A)
+ * NOTE: LOption and ROption are logically same key. (M0110)
*/
+#ifdef HASU
KEYMAP(
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS,
- LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1,
- FN2, LALT, SPC, LGUI
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, ESC, PEQL,PSLS,PAST,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
+ LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, UP, P1, P2, P3, PENT,
+ FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT
+ ),
+ // HHKB & WASD
+ KEYMAP(
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST,
+ CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS,
+ LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS,
+ LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT,
+ FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT
),
// vi mousekeys
KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL,
- CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO,
- LCTL,VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT,
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO,
- NO, LALT, BTN1, LGUI
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST,
+ CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS,
+ NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS,
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT,
+ LCTL,LALT, BTN1, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT
),
// vi cusorkeys
KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL,
- CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, NO,
- LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT,
- LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1,
- NO, LALT, SPC, LGUI
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST,
+ CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS,
+ NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
+ LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT,
+ LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT
+ ),
+#else
+ KEYMAP(
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,PEQL,PSLS,PAST,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
+ FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
+ LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT
),
// HHKB & WASD
KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL,
- CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO,
- LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT,
- LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN,
- FN2, LALT, SPC, LGUI
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST,
+ CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS,
+ FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS,
+ LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT,
+ LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT
),
+#endif
};
diff --git a/m0110_usb/matrix.c b/m0110_usb/matrix.c
index f045920cc..11303ee0f 100644
--- a/m0110_usb/matrix.c
+++ b/m0110_usb/matrix.c
@@ -93,6 +93,9 @@ uint8_t matrix_scan(void)
#endif
if (key == M0110_NULL) {
return 0;
+ } else if (key == M0110_ERROR) {
+ // TODO: error recovery or reinit
+ return 0;
} else {
#ifdef MATRIX_HAS_LOCKING_CAPS
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
diff --git a/rules.mk b/rules.mk
index 3d32adc5f..d575726c7 100644
--- a/rules.mk
+++ b/rules.mk
@@ -230,6 +230,8 @@ LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
+# You can give EXTRALDFLAGS at 'make' command line.
+LDFLAGS += $(EXTRALDFLAGS)
@@ -315,9 +317,10 @@ GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+# You can give EXTRAFLAGS at 'make' command line.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)