summaryrefslogtreecommitdiff
path: root/ps2_vusb/Makefile
diff options
context:
space:
mode:
authortmk2011-02-21 15:43:17 +0900
committertmk2011-02-22 03:09:14 +0900
commitfb8d23c60c757d5d9c2270cb0123a53be2049a28 (patch)
tree2f5d695f9d501468dc83f4861e7367cdf905ed3f /ps2_vusb/Makefile
parent47f5d8b545eec12ca74d8e7048bb5daa290d937e (diff)
integrate V-USB support into ps2_usb
Diffstat (limited to 'ps2_vusb/Makefile')
-rw-r--r--ps2_vusb/Makefile78
1 files changed, 0 insertions, 78 deletions
diff --git a/ps2_vusb/Makefile b/ps2_vusb/Makefile
deleted file mode 100644
index 6901d1f5c..000000000
--- a/ps2_vusb/Makefile
+++ /dev/null
@@ -1,78 +0,0 @@
-# Target file name (without extension).
-TARGET = ps2_vusb
-
-# Directory common source filess exist
-COMMON_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-TARGET_SRC = main.c \
- keymap.c \
- matrix.c \
- led.c \
- ps2_usart.c \
- sendchar_dummy.c
-# sendchar_usart.c
-
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-#MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-MCU = atmega168
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 20000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
-#USB_NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = usbasp
-AVRDUDE_PORT =
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-include $(COMMON_DIR)/Makefile.vusb
-include $(COMMON_DIR)/Makefile.common