summaryrefslogtreecommitdiff
path: root/hhkb
diff options
context:
space:
mode:
authortmk2012-06-08 00:37:46 +0900
committertmk2012-06-08 13:32:38 +0900
commitafb08462085132acf7a1962522952f7dbf064519 (patch)
treebc60f28142bc36d882f5930191ba8da98a27c47c /hhkb
parent63d82fcaeb78d0764f39667b937262ed4a692c17 (diff)
Made directories for keyboard and converter projects.
Diffstat (limited to 'hhkb')
-rw-r--r--hhkb/Makefile.iwrap93
-rw-r--r--hhkb/Makefile.pjrc60
-rw-r--r--hhkb/Makefile.vusb91
-rw-r--r--hhkb/README151
-rw-r--r--hhkb/config_iwrap.h55
-rw-r--r--hhkb/config_pjrc.h62
-rw-r--r--hhkb/config_vusb.h49
-rw-r--r--hhkb/doc/Bluetooth.txt4
-rwxr-xr-xhhkb/doc/Bluetooth_img/.picasa.ini2
-rw-r--r--hhkb/doc/Bluetooth_img/BT_circuit.jpgbin502118 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB.txt199
-rw-r--r--hhkb/doc/HHKB_img/HHKB_TP1684.jpgbin149082 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/HHKB_chart1.jpgbin155342 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/HHKB_chart2.jpgbin148225 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/HHKB_connector.jpgbin193900 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/HHKB_controller.jpgbin135100 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/HHKB_keyswitch.jpgbin171469 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/connector_contact.jpgbin192830 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/logic_analyzer.jpgbin169564 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/probe_contact.jpgbin208477 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/teensy_install.jpgbin135851 -> 0 bytes
-rw-r--r--hhkb/doc/HHKB_img/teensy_wiring.jpgbin154695 -> 0 bytes
-rw-r--r--hhkb/keymap.c221
-rw-r--r--hhkb/led.c26
-rw-r--r--hhkb/matrix.c294
-rw-r--r--hhkb/usbconfig.h388
26 files changed, 0 insertions, 1695 deletions
diff --git a/hhkb/Makefile.iwrap b/hhkb/Makefile.iwrap
deleted file mode 100644
index d922b0f50..000000000
--- a/hhkb/Makefile.iwrap
+++ /dev/null
@@ -1,93 +0,0 @@
-#
-# Makefile for iWRAP
-#
-
-
-# Target file name (without extension).
-TARGET = hhkb_iwrap
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config_iwrap.h
-
-
-# V-USB debug level: To use ps2_usart.c level must be 0
-# ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-MCU = atmega168p
-# avrdude doesn't know atmega168p
-AVRDUDE_MCU = atmega168
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 12000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-AVRDUDE = avrdude
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = usbasp
-AVRDUDE_PORT =
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-
-# Search Path
-VPATH = $(TARGET_DIR)
-
-include $(TOP_DIR)/protocol/iwrap.mk
-# To be swatchable btween Bluetooth and USB. Comment out if you don't need USB.
-include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/hhkb/Makefile.pjrc b/hhkb/Makefile.pjrc
deleted file mode 100644
index 28b6b589d..000000000
--- a/hhkb/Makefile.pjrc
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
-# Target file name (without extension).
-TARGET = hhkb_pjrc
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config_pjrc.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-#MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-# Search Path
-VPATH = $(TARGET_DIR)
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/hhkb/Makefile.vusb b/hhkb/Makefile.vusb
deleted file mode 100644
index 734b73a02..000000000
--- a/hhkb/Makefile.vusb
+++ /dev/null
@@ -1,91 +0,0 @@
-#
-# Makefile for V-USB
-#
-
-
-# Target file name (without extension).
-TARGET = hhkb_vusb
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config_vusb.h
-
-
-# V-USB debug level: To use ps2_usart.c level must be 0
-# ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-MCU = atmega328p
-# avrdude doesn't know atmega168p
-AVRDUDE_MCU = $(MCU)
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 12000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-AVRDUDE = avrdude
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = usbasp
-AVRDUDE_PORT =
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-
-# Search Path
-VPATH = $(TARGET_DIR)
-
-include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/hhkb/README b/hhkb/README
deleted file mode 100644
index 65f7dcab5..000000000
--- a/hhkb/README
+++ /dev/null
@@ -1,151 +0,0 @@
-Alternative Controller for HHKB
-===============================
-
-Feature
--------
-- Mouse Keys
-- NKRO on USB(PJRC Tennsy only)
-- Keymap Layers
-
-
-Customize Keymap
-----------------
-see keymap.c.
-
-
-
-Build
-=====
-PJRC Teensy
------------
-0. Edit matrix.c.
- adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
-1. Define macros in config_pjrc.h.(Optional)
- VENDOR_ID, PRODUCT_ID and string descriptor.
- IS_COMMAND
-2. Edit Makefile for MCU setting and build options.
- MCU, F_CPU
- MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, NKRO_ENABLE
-3. Build hex file.
- $ make -f Makefile.pjrc
-4. Program MCU.
- $ make -f Makefile.pjrc program
-
-
-V-USB
------
-0. Edit matrix.c and usbconfig.h.
- adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
- define macros for V-USB in usbconfig.h.
-1. Define macros in config_vusb.h.(Optional)
- IS_COMMAND
-2. Edit Makefile.vusb for MCU setting and build options.
- MCU, F_CPU
- MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
-3. Build hex file.
- $ make -f Makefile.vusb
-4. Program MCU.
- $ make -f Makefile.vusb program
-
- Using a bootloader to program for convenience is recommended.
- Once program this V-USB bootloader at first, you can program MCU without
- extra programmer. You should have reset switch to start up as bootloader
- mode in this case.
- USBaspLoader:
- http://www.obdev.at/products/vusb/usbasploader.html
-
-
-iWRAP
------
-0. Edit matrix.c and usbconfig.h.
- adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
- define macros for V-USB in usbconfig.h.
-1. Define macros in config_iwrap.h.(Optional)
- IS_COMMAND
-2. Edit Makefile.iwrap for MCU setting and build options.
- MCU, F_CPU
- MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
-3. Build hex file.
- $ make -f Makefile.iwrap
-4. Program MCU.
- $ make -f Makefile.iwrap program
-
-
-
-Hardware
-========
-PJRC Teensy
------------
- +---------------+
- | Teensy++ |
- | |
- | | HHKB
- | | ~~~~
- | PB0-2|------->ROW(6-8)
- | PB3-5|------->COL(9-11)
- | PB6|------->ENABLE(12)
- | PE6|<-------KEY(4)
- | PE7|------->PREV(5)
- | |
- | |
- | |
- +---------------+
-
-
-V-USB
------
- +---+ +---------------+
-USB GND | | ATmega168 |
-~~~ C3 | |
-5V <-------+--------+---|Vcc,AVCC | HHKB
- R1 | | ~~~~
-D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
-D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
- Z1 Z2 | PC3|------->ENABLE(12)
-GND<----+---+-----------|GND PB0|<-------KEY(4)
- | PB1|------->PREV(5)
- | |
- GND+-C2--+--|XTAL1 RXD|------->Debug Console
- X1 | TXD|<-------Debug Console
- GND+-C3--+--|XTAL2 RST|---SW--+GND
- +---------------+
-R1: 1.5K Ohm
-R2,R3: 68 Ohm
-Z1,Z2: Zener 3.6V
-C1,C2: 22pF
-C3: 0.1uF
-X1: Crystal 20MHz(16MHz/12MHz)
-SW: Push Switch(Optional for bootloader)
-
-
-iWRAP
------
- +---------------+ WT12
- 5V | ATmega168 | 5V/3.3V~~~~
- +-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD)
-USB | C3 | PC5|<--/----iWRAP(TxD)
-~~~ | + | |
-5V <--BATT + GND | | HHKB
- R1 | | ~~~~
-D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8)
-D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
- Z1 Z2 | PC3|------->ENABLE(12)
-GND<----+---+-----------|GND PB0|<-------KEY(4)
- | PB1|------->PREV(5)
- | |
- GND+-C2--+--|XTAL1 RXD|------->Debug Console
- X1 | TXD|<-------Debug Console
- GND+-C3--+--|XTAL2 RST|---SW--+GND
- +---------------+
-
-R1: 1.5K Ohm
-R2,R3: 68 Ohm
-Z1,Z2: Zener 3.6V
-C1,C2: 22pF
-C3: 0.1uF
-X1: Crystal 12MHz
-SW: Push Switch(Optional)
-BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
-
-
-EOF
diff --git a/hhkb/config_iwrap.h b/hhkb/config_iwrap.h
deleted file mode 100644
index 80ab64398..000000000
--- a/hhkb/config_iwrap.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xBEEA
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER t.m.k.
-#define PRODUCT HHKB mod
-#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
-
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-/* pins for Software UART */
-#define SUART_IN_PIN PINC
-#define SUART_IN_BIT 5
-#define SUART_OUT_PORT PORTC
-#define SUART_OUT_BIT 4
-
-
-#define DEBUG_LED 1
-#define DEBUG_LED_CONFIG (DDRD |= (1<<4))
-#define DEBUG_LED_OFF (PORTD |= (1<<4))
-#define DEBUG_LED_ON (PORTD &= ~(1<<4))
-
-#endif
diff --git a/hhkb/config_pjrc.h b/hhkb/config_pjrc.h
deleted file mode 100644
index fffe3522c..000000000
--- a/hhkb/config_pjrc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xCAFE
-#define DEVICE_VER 0x0101
-#define MANUFACTURER t.m.k.
-#define PRODUCT HHKB mod
-#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
-
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 192
-#endif
-
-
-/* PS/2 mouse */
-#ifdef PS2_MOUSE_ENABLE
-/*
-# define PS2_CLOCK_PORT PORTF
-# define PS2_CLOCK_PIN PINF
-# define PS2_CLOCK_DDR DDRF
-# define PS2_CLOCK_BIT 0
-# define PS2_DATA_PORT PORTF
-# define PS2_DATA_PIN PINF
-# define PS2_DATA_DDR DDRF
-# define PS2_DATA_BIT 1
-*/
-#endif
-
-#endif
diff --git a/hhkb/config_vusb.h b/hhkb/config_vusb.h
deleted file mode 100644
index 268644849..000000000
--- a/hhkb/config_vusb.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xC0FE
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER t.m.k.
-#define PRODUCT HHKB mod
-#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
-
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-#define DEBUG_LED 1
-#define DEBUG_LED_CONFIG (DDRD |= (1<<4))
-#define DEBUG_LED_OFF (PORTD |= (1<<4))
-#define DEBUG_LED_ON (PORTD &= ~(1<<4))
-
-#endif
diff --git a/hhkb/doc/Bluetooth.txt b/hhkb/doc/Bluetooth.txt
deleted file mode 100644
index b27f19700..000000000
--- a/hhkb/doc/Bluetooth.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-HHKB Bluetooth mod
-==================
-See this article:
-http://geekhack.org/showwiki.php?title=Island:20851
diff --git a/hhkb/doc/Bluetooth_img/.picasa.ini b/hhkb/doc/Bluetooth_img/.picasa.ini
deleted file mode 100755
index f6a4f6067..000000000
--- a/hhkb/doc/Bluetooth_img/.picasa.ini
+++ /dev/null
@@ -1,2 +0,0 @@
-[Picasa]
-name=Bluetooth_img
diff --git a/hhkb/doc/Bluetooth_img/BT_circuit.jpg b/hhkb/doc/Bluetooth_img/BT_circuit.jpg
deleted file mode 100644
index 2e5a25e81..000000000
--- a/hhkb/doc/Bluetooth_img/BT_circuit.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB.txt b/hhkb/doc/HHKB.txt
deleted file mode 100644
index ace931de3..000000000
--- a/hhkb/doc/HHKB.txt
+++ /dev/null
@@ -1,199 +0,0 @@
-Alternative Controller for HHKB pro
-===================================
-I want to add vi cursor and mouse keys to HHKB. Original HHKB controller is not programmable and
-firmware source code is not open. So, customizing HHKB needs to replace original controller with programmable one.
-I used Teensy++ as alternative controller. Though a Teensy has enough ports to drive HHKB,
-Teensy++ has clean pinout and it makes programing and wiring easier.
-
-This is just a proof of concept for replacing controller of HHKB, not a complete firmware.
-
-My prototype firmware source tree is here:
- github(http://github.com/tmk/tmk_keyboard)
-This firmware is a port of my previous project:
- HHKB style Mod(http://geekhack.org/showwiki.php?title=Island:11930)
-PJRC:
- Teensy++/Teensy(http://www.pjrc.com/teensy/)
-
-
-Pros:
- * without pattern cutting, case mod and soldering
- * can keep original controller intact
- * can change HHKB behaviour as you like(by C programming)
-
-Cons:
- * void your warranty
- * unavailability of Teensy++/Teensy(because of PS3 cracking boom?)
-
-Features:
- * customized keymap
- * more keymap layers
- * mouse keys for minimum mouse operation(never comfortable for normal use)
- * and more...(in the future)
-
-Any suggestions or ideas are welcome.
-
-
-NOTE:
- My HHKB is just "Professional". This means followings may not be applied to "Professional2".
-
-DISCLAIMER:
- I'm not a professional for electronics and MCU programming. This may damage your HHKB.
- And my English writing is poor, I'm not sure I can convey my notions accurately.
-
-
-Teensy++ installation
----------------------
-Angled USB mini B adapter is used to install Teensy++ laterally.
-(teensy_install.jpg)
-
-Bread baord wires are used to connect Teensy++.
-(teensy_wiring.jpg)
-(connector_contact.jpg)
-
-
-HHKB internal
--------------
-HHKB pro has some chips on separate two PCBs.
-
-Controller PCB:
- M38K07M4 Renesas MCU with USB function
- http://documentation.renesas.com/eng/products/mpumcu/rej03b0192_38k0ds.pdf
-
- (HHKB_controller.jpg)
-
-Keyswitch PCB:
- HC4051 Analog Multiplexer: select a row line.
- http://www.alldatasheet.com/datasheet-pdf/pdf/203989/KODENSHI/KK74HC4051A.html
- LS145 BCD Decoder: select a column line.
- http://www.alldatasheet.com/datasheet-pdf/pdf/27373/TI/SN74LS145D.html
- BU9831 Non-volatile electronic potentiometer: for calibration?
- http://www.alldatasheet.com/datasheet-pdf/pdf/36387/ROHM/BU9831.html
- TP1683/4 Capacitive Sensing controller: no datasheet available.
-
- (HHKB_keyswitch.jpg)
-
- Topre original chip?
- (HHKB_TP1684.jpg)
-
-
-Two PCBs are connected by 15 lines. Vcc and GND use 3 lines each, other 9 lines are for keyboard signaling.
-
- Keyswitch PCB connector Teensy++ pins
- -------------------------------------------------------------------------------
- 1 Vcc(5V) 5V
- 2 Vcc(5V)
- 3 Vcc(5V)
- 4 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
- 5 TP1684 KEY_PREV: assert previous key state??? PE7 output
- 6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output
- 7 HC4051 B(bit1) PB1 output
- 8 HC4051 C(bit2) PB2 output
- 9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output
- 10 LS145 B(bit1) PB4 output
- 11 LS145 C(bit2) PB5 output
- 12 LS145 D(enable) Low(0) enable selected column PB6 output
- 13 GND
- 14 GND
- 15 GND GND
-
- (HHKB_connector.jpg)
-
-
-Keyswitch matrix
-----------------
-60 keyswitches in 8*8 matrix. It is ghost-free and bounce-free.
-
- COL 0 1 2 3 4 5 6 7
-ROW ---------------------------------------------------------------
- 0| 2 q w s a z x c
- 1| 3 4 r e d f v b
- 2| 5 6 y t g h n _NONE_
- 3| 1 Esc Tab Control LShift LAlt LMeta Space
- 4| 7 8 u i k j m _NONE_
- 5| \ ` Delete Return Fn RShift RAlt RMeta
- 6| 9 0 o p ; l , _NONE_
- 7| - + ] [ ' / . _NONE_
-
-
-Matrix diagram:
- +-------------------------+-+-+-+-+-+-+-+ Vcc
- |bias control? - - - - - - - - ---
- | 3.9K*8 R R R R R R R R |
- +--------^+ +--------+ - - - - - - - - |
- | 2| | HC4051 <0-------|-|-|-|-|-|-|-|--|R|-+
- | |capa. | <1-------|-|-|-|-|-|-|-|--|R|-+
- | TP1684 |sense | <2-------|-|-|-|-|-|-|-|--|R|-+
- | 11<------| <3-------|-|-|-|-|-|-|-|--|R|-+
- | | | <4-------|-|-|-|-|-|-|-|--|R|-+
- | | | <5-------|-|-|-|-|-|-|-|--|R|-+
- | <-+ | <6-------|-|-|-|-|-|-|-|--|R|-+
- | 1 4 | | | <7-------|-|-|-|-|-|-|-|--|R|-+
- +---V---^-+ | +-^-^-^--+ 0 1 2 3 4 5 6 7 33K*8
- KEY PREV | A B C +-----------------+
- | | +-^----+ | | | | LS145 |
- Vcc | | |BU9831| | | | +-^--^--^--^------+
- --- | | +------+ | | | A B C D +------+
- | | | | | | | | | | | |
- 1-3 4 5 6 7 8 9 10 11 12 13-15 |
- +--------------------------------------------------+ |
- | connector | ---
- +--------------------------------------------------+ GND
- to controller
-
-
-Signals charts:
- While pressing space bar, watched HHKB original controller signals by logic analyzer.
- Row and column is looping between 0-7 each for selecting a key.
- A key is scaned every about 15ms, so scan rate is 66Hz.
-
- (HHKB_chart1.jpg)
-
- Space bar locate at ROW:3 COL:7. A key is selected by HC4051(C,B,A) and LS145(C,B,A).
- Key state can be read on TP1684(4/KEY) while asserting low on LS145(D).
-
- Usage of TP1684(5) is not clear. Controller seemed to output previous key state on this line.
- However key state can be read without using this signal.
-
- (HHKB_chart2.jpg)
-
-
-Matrix scan pseudo code:
- for (row: 0-7) {
- SELECT_ROW(row); // set HC4051(A,B,C)
-
- for (col: 0-7) {
- SELECT_COL(col); // set LS145(A,B,C)
-
- _delay_us(40);
-
- if (prev_key_state(row, col)) {
- KEY_PREV_ON;
- }
-
- _delay_us(7);
-
- ENALBLE_COL(); // set LS145(D) to low
-
- _delay_us(10);
-
- if (KEY == 0) { // read TP1684(KEY)
- // key pressed
- } else {
- // not pressed
- }
-
- KEY_PREV_OFF;
- UNALBLE_COL(); // set LS145(D) to high
-
- _delay_us(150);
- }
- }
-
-
-Keymap layers
--------------
-Followings are added layers with additional Fn keys.
-
-see keymap.c
-
-EOF
diff --git a/hhkb/doc/HHKB_img/HHKB_TP1684.jpg b/hhkb/doc/HHKB_img/HHKB_TP1684.jpg
deleted file mode 100644
index 0a0316409..000000000
--- a/hhkb/doc/HHKB_img/HHKB_TP1684.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/HHKB_chart1.jpg b/hhkb/doc/HHKB_img/HHKB_chart1.jpg
deleted file mode 100644
index 1f09bd185..000000000
--- a/hhkb/doc/HHKB_img/HHKB_chart1.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/HHKB_chart2.jpg b/hhkb/doc/HHKB_img/HHKB_chart2.jpg
deleted file mode 100644
index 45f5ada90..000000000
--- a/hhkb/doc/HHKB_img/HHKB_chart2.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/HHKB_connector.jpg b/hhkb/doc/HHKB_img/HHKB_connector.jpg
deleted file mode 100644
index e8a09e9b2..000000000
--- a/hhkb/doc/HHKB_img/HHKB_connector.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/HHKB_controller.jpg b/hhkb/doc/HHKB_img/HHKB_controller.jpg
deleted file mode 100644
index e3dae8e86..000000000
--- a/hhkb/doc/HHKB_img/HHKB_controller.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/HHKB_keyswitch.jpg b/hhkb/doc/HHKB_img/HHKB_keyswitch.jpg
deleted file mode 100644
index 3afc269e7..000000000
--- a/hhkb/doc/HHKB_img/HHKB_keyswitch.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/connector_contact.jpg b/hhkb/doc/HHKB_img/connector_contact.jpg
deleted file mode 100644
index 5304bc8d7..000000000
--- a/hhkb/doc/HHKB_img/connector_contact.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/logic_analyzer.jpg b/hhkb/doc/HHKB_img/logic_analyzer.jpg
deleted file mode 100644
index f1b438ae7..000000000
--- a/hhkb/doc/HHKB_img/logic_analyzer.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/probe_contact.jpg b/hhkb/doc/HHKB_img/probe_contact.jpg
deleted file mode 100644
index dc79afa0c..000000000
--- a/hhkb/doc/HHKB_img/probe_contact.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/teensy_install.jpg b/hhkb/doc/HHKB_img/teensy_install.jpg
deleted file mode 100644
index 873d988ed..000000000
--- a/hhkb/doc/HHKB_img/teensy_install.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/doc/HHKB_img/teensy_wiring.jpg b/hhkb/doc/HHKB_img/teensy_wiring.jpg
deleted file mode 100644
index 1c4eb6743..000000000
--- a/hhkb/doc/HHKB_img/teensy_wiring.jpg
+++ /dev/null
Binary files differ
diff --git a/hhkb/keymap.c b/hhkb/keymap.c
deleted file mode 100644
index 85a7c31b7..000000000
--- a/hhkb/keymap.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Keymap for PFU HHKB Pro
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "host.h"
-#include "usb_keycodes.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( \
- K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \
- K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \
- K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \
- K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \
- K35, K36, K37, K57, K56 \
-) \
-{ \
- { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
- { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
- { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \
- { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
- { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \
- { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
- { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_NO }, \
- { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_NO } \
-}
-
-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 0, // Fn0
- 1, // Fn1
- 2, // Fn2
- 3, // Fn3
- 3, // Fn4
- 4, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KB_NO, // Fn0
- KB_NO, // Fn1
- KB_SLSH, // Fn2
- KB_SCLN, // Fn3
- KB_NO, // Fn4
- KB_SPC, // Fn5
- KB_NO, // Fn6
- KB_NO // Fn7
-};
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------.
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
- * |-----------------------------------------------------------|
- * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1|
- * `-----------------------------------------------------------'
- * |Gui|Alt |Fn5 |Alt |Fn4|
- * `-------------------------------------------'
- */
- KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
- LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
- LGUI,LALT, FN5, RALT,FN4),
-
- /* Layer 1: HHKB mode (HHKB Fn)
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
- * |-----------------------------------------------------------|
- * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
- * |-----------------------------------------------------------|
- * |Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx|
- * `-----------------------------------------------------------'
- * |Gui |Alt |Space |Alt |xxx|
- * `--------------------------------------------'
- */
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \
- LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
- LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
- LGUI,LALT, SPC, RALT,FN7),
-
- /* Layer 2: Vi mode (Slash)
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
- * |-----------------------------------------------------------|
- * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | | |Hom|PgD|PgUlEnd|xxx|Shift | |
- * `-----------------------------------------------------------'
- * |Gui|Alt |Space |Alt |Gui|
- * `-------------------------------------------'
- */
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
- LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,NO, \
- LGUI,LALT, SPC, RALT,RGUI),
-
- /* Layer 3: Mouse mode (Semicolon)
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab |MwL|MwU|McU|MwD|MwR|MwL|MwD|MwU|MwR| | | |Backs|
- * |-----------------------------------------------------------|
- * |Contro| |McL|McD|McR| |McL|McD|McU|McR|xxx| |Return |
- * |-----------------------------------------------------------|
- * |Shift |Mb4|Mb5|Mb1|Mb2|Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt |Mb1 |Alt |Gui|
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
- */
-#ifdef HOST_IWRAP
-// iWRAP does not support mouse wheel, use these keycodes to remap as wheel
-#define KB_KPPL KB_KP_PLUS
-#define KB_KPMI KB_KP_MINUS
-#define KB_KPAS KB_KP_ASTERISK
-#define KB_KPSL KB_KP_SLASH
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, KPAS,KPPL,MS_U,KPMI,KPSL,KPAS,KPPL,KPMI,KPSL,NO, NO, NO, BSPC, \
- LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, ENT, \
- LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \
- LGUI,LALT, BTN1, RALT,FN4),
-#else
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, WH_L,WH_U,MS_U,WH_D,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, \
- LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, ENT, \
- LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \
- LGUI,LALT, BTN1, RALT,FN4),
-#endif
-
- /* Layer 4: Matias half keyboard style (Space)
- * ,-----------------------------------------------------------.
- * | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc|
- * |-----------------------------------------------------------|
- * |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab |
- * |-----------------------------------------------------------|
- * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control |
- * |-----------------------------------------------------------|
- * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt |xxxxxxxxxxxxxxxxxxxxxxx|Alt |Gui|
- * `--------------------------------------------'
- */
-/*
- KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \
- BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \
- LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \
- LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \
- LGUI,LALT, FN5, RALT,RGUI)
-*/
- /* Mouse mode (Space) */
-#ifdef HOST_IWRAP
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, KPAS,KPPL,MS_U,KPMI,KPSL,KPAS,KPPL,KPMI,KPSL,NO, NO, NO, BSPC, \
- LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, ENT, \
- LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \
- LGUI,LALT, FN5, RALT,RGUI),
-#else
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, WH_L,WH_U,MS_U,WH_D,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, \
- LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, ENT, \
- LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \
- LGUI,LALT, FN5, RALT,RGUI),
-#endif
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return KEYCODE(layer, row, col);
-}
-
-uint8_t keymap_fn_layer(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_layer[biton(fn_bits)]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
-}
diff --git a/hhkb/led.c b/hhkb/led.c
deleted file mode 100644
index 669b6107f..000000000
--- a/hhkb/led.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "led.h"
-
-
-/* HHKB has no LEDs */
-void led_set(uint8_t usb_led)
-{
-}
-
diff --git a/hhkb/matrix.c b/hhkb/matrix.c
deleted file mode 100644
index 350066b90..000000000
--- a/hhkb/matrix.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "timer.h"
-#include "matrix.h"
-
-
-// Timer resolution check
-#if (1000000/TIMER_RAW_FREQ > 20)
-# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
-#endif
-
-#if (MATRIX_COLS > 16)
-# error "MATRIX_COLS must not exceed 16"
-#endif
-#if (MATRIX_ROWS > 255)
-# error "MATRIX_ROWS must not exceed 255"
-#endif
-
-
-// matrix state buffer(1:on, 0:off)
-#if (MATRIX_COLS <= 8)
-static uint8_t *matrix;
-static uint8_t *matrix_prev;
-static uint8_t _matrix0[MATRIX_ROWS];
-static uint8_t _matrix1[MATRIX_ROWS];
-#else
-static uint16_t *matrix;
-static uint16_t *matrix_prev;
-static uint16_t _matrix0[MATRIX_ROWS];
-static uint16_t _matrix1[MATRIX_ROWS];
-#endif
-
-// HHKB has no ghost and no bounce.
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-
-
-// Matrix I/O ports
-//
-// row: HC4051[A,B,C] selects scan row0-7
-// col: LS145[A,B,C,D] selects scan col0-7 and enable(D)
-// key: on: 0/off: 1
-// prev: unknown: output previous key state(negated)?
-
-#ifdef HOST_PJRC
-// Ports for Teensy
-// row: PB0-2
-// col: PB3-5,6
-// key: PE6(pull-uped)
-// prev: PE7
-#define KEY_INIT() do { \
- DDRB |= 0x7F; \
- DDRE |= (1<<7); \
- DDRE &= ~(1<<6); \
- PORTE |= (1<<6); \
-} while (0)
-#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
- ((ROW) & 0x07))
-#define KEY_ENABLE() (PORTB &= ~(1<<6))
-#define KEY_UNABLE() (PORTB |= (1<<6))
-#define KEY_STATE() (PINE & (1<<6))
-#define KEY_PREV_ON() (PORTE |= (1<<7))
-#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
-#define KEY_POWER_ON()
-#define KEY_POWER_OFF()
-#else
-// Ports for V-USB
-// key: PB0(pull-uped)
-// prev: PB1
-// row: PB2-4
-// col: PC0-2,3
-// power: PB5(Low:on/Hi-z:off)
-#define KEY_INIT() do { \
- DDRB |= 0x3E; \
- DDRB &= ~(1<<0); \
- PORTB |= 1<<0; \
- DDRC |= 0x0F; \
- KEY_UNABLE(); \
- KEY_PREV_OFF(); \
-} while (0)
-#define KEY_SELECT(ROW, COL) do { \
- PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
- PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \
-} while (0)
-#define KEY_ENABLE() (PORTC &= ~(1<<3))
-#define KEY_UNABLE() (PORTC |= (1<<3))
-#define KEY_STATE() (PINB & (1<<0))
-#define KEY_PREV_ON() (PORTB |= (1<<1))
-#define KEY_PREV_OFF() (PORTB &= ~(1<<1))
-// Power supply switching
-#define KEY_POWER_ON() do { \
- KEY_INIT(); \
- PORTB &= ~(1<<5); \
- _delay_us(200); \
-} while (0)
-#define KEY_POWER_OFF() do { \
- DDRB &= ~0x3F; \
- PORTB &= ~0x3F; \
- DDRC &= ~0x0F; \
- PORTC &= ~0x0F; \
-} while (0)
-#endif
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- KEY_INIT();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
- matrix = _matrix0;
- matrix_prev = _matrix1;
-}
-
-uint8_t matrix_scan(void)
-{
- uint8_t *tmp;
-
- tmp = matrix_prev;
- matrix_prev = matrix;
- matrix = tmp;
-
- KEY_POWER_ON();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- KEY_SELECT(row, col);
- _delay_us(40);
-
- // Not sure this is needed. This just emulates HHKB controller's behaviour.
- if (matrix_prev[row] & (1<<col)) {
- KEY_PREV_ON();
- }
- _delay_us(7);
-
- // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
- // If V-USB interrupts in this section we could lose 40us or so
- // and would read invalid value from KEY_STATE.
- uint8_t last = TIMER_RAW;
-
- KEY_ENABLE();
- // Wait for KEY_STATE outputs its value.
- // 1us was ok on one HHKB, but not worked on another.
- _delay_us(10);
- if (KEY_STATE()) {
- matrix[row] &= ~(1<<col);
- } else {
- matrix[row] |= (1<<col);
- }
-
- // Ignore if this code region execution time elapses more than 20us.
- if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) {
- matrix[row] = matrix_prev[row];
- }
-
- KEY_PREV_OFF();
- KEY_UNABLE();
- // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
- // This takes 25us or more to make sure KEY_STATE returns to idle state.
- _delay_us(150);
- }
- }
- KEY_POWER_OFF();
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix[i] != matrix_prev[i])
- return true;
- }
- return false;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix_has_ghost_in_row(i))
- return true;
- }
-#endif
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-#if (MATRIX_COLS <= 8)
-uint8_t matrix_get_row(uint8_t row)
-#else
-uint16_t matrix_get_row(uint8_t row)
-#endif
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
-#if (MATRIX_COLS <= 8)
- print("\nr/c 01234567\n");
-#else
- print("\nr/c 0123456789ABCDEF\n");
-#endif
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
-#if (MATRIX_COLS <= 8)
- pbin_reverse(matrix_get_row(row));
-#else
- pbin_reverse16(matrix_get_row(row));
-#endif
-#ifdef MATRIX_HAS_GHOST
- if (matrix_has_ghost_in_row(row)) {
- print(" <ghost");
- }
-#endif
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-#if (MATRIX_COLS <= 8)
- count += bitpop(matrix[i]);
-#else
- count += bitpop16(matrix[i]);
-#endif
- }
- return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
- // no ghost exists in case less than 2 keys on
- if (((matrix[row] - 1) & matrix[row]) == 0)
- return false;
-
- // ghost exists in case same state as other row
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- if (i != row && (matrix[i] & matrix[row]) == matrix[row])
- return true;
- }
- return false;
-}
-#endif
diff --git a/hhkb/usbconfig.h b/hhkb/usbconfig.h
deleted file mode 100644
index c3aad34be..000000000
--- a/hhkb/usbconfig.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/* Name: usbconfig.h
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2005-04-01
- * Tabsize: 4
- * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
- */
-
-#ifndef __usbconfig_h_included__
-#define __usbconfig_h_included__
-
-#include "config_vusb.h"
-
-/*
-General Description:
-This file is an example configuration (with inline documentation) for the USB
-driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
-also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
-wire the lines to any other port, as long as D+ is also wired to INT0 (or any
-other hardware interrupt, as long as it is the highest level interrupt, see
-section at the end of this file).
-*/
-
-/* ---------------------------- Hardware Config ---------------------------- */
-
-#define USB_CFG_IOPORTNAME D
-/* This is the port where the USB bus is connected. When you configure it to
- * "B", the registers PORTB, PINB and DDRB will be used.
- */
-#define USB_CFG_DMINUS_BIT 3
-/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
- * This may be any bit in the port.
- */
-#define USB_CFG_DPLUS_BIT 2
-/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
- * This may be any bit in the port. Please note that D+ must also be connected
- * to interrupt pin INT0! [You can also use other interrupts, see section
- * "Optional MCU Description" below, or you can connect D- to the interrupt, as
- * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
- * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
- * markers every millisecond.]
- */
-#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
-/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
- * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
- * require no crystal, they tolerate +/- 1% deviation from the nominal
- * frequency. All other rates require a precision of 2000 ppm and thus a
- * crystal!
- * Since F_CPU should be defined to your actual clock rate anyway, you should
- * not need to modify this setting.
- */
-#define USB_CFG_CHECK_CRC 0
-/* Define this to 1 if you want that the driver checks integrity of incoming
- * data packets (CRC checks). CRC checks cost quite a bit of code size and are
- * currently only available for 18 MHz crystal clock. You must choose
- * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
- */
-
-/* ----------------------- Optional Hardware Config ------------------------ */
-
-/* #define USB_CFG_PULLUP_IOPORTNAME D */
-/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
- * V+, you can connect and disconnect the device from firmware by calling
- * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
- * This constant defines the port on which the pullup resistor is connected.
- */
-/* #define USB_CFG_PULLUP_BIT 4 */
-/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
- * above) where the 1.5k pullup resistor is connected. See description
- * above for details.
- */
-
-/* --------------------------- Functional Range ---------------------------- */
-
-#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
-/* Define this to 1 if you want to compile a version with two endpoints: The
- * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
- * number).
- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
-/* Define this to 1 if you want to compile a version with three endpoints: The
- * default control endpoint 0, an interrupt-in endpoint 3 (or the number
- * configured below) and a catch-all default interrupt-in endpoint as above.
- * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
- */
-#define USB_CFG_EP3_NUMBER 3
-/* If the so-called endpoint 3 is used, it can now be configured to any other
- * endpoint number (except 0) with this macro. Default if undefined is 3.
- */
-/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
-/* The above macro defines the startup condition for data toggling on the
- * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
- * Since the token is toggled BEFORE sending any data, the first packet is
- * sent with the oposite value of this configuration!
- */
-#define USB_CFG_IMPLEMENT_HALT 0
-/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
- * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
- * it is required by the standard. We have made it a config option because it
- * bloats the code considerably.
- */
-#define USB_CFG_SUPPRESS_INTR_CODE 0
-/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
- * want to send any data over them. If this macro is defined to 1, functions
- * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
- * you need the interrupt-in endpoints in order to comply to an interface
- * (e.g. HID), but never want to send any data. This option saves a couple
- * of bytes in flash memory and the transmit buffers in RAM.
- */
-#define USB_CFG_INTR_POLL_INTERVAL 10
-/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
- * interval. The value is in milliseconds and must not be less than 10 ms for
- * low speed devices.
- */
-#define USB_CFG_IS_SELF_POWERED 0
-/* Define this to 1 if the device has its own power supply. Set it to 0 if the
- * device is powered from the USB bus.
- */
-#define USB_CFG_MAX_BUS_POWER 100
-/* Set this variable to the maximum USB bus power consumption of your device.
- * The value is in milliamperes. [It will be divided by two since USB
- * communicates power requirements in units of 2 mA.]
- */
-#define USB_CFG_IMPLEMENT_FN_WRITE 1
-/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
- * transfers. Set it to 0 if you don't need it and want to save a couple of
- * bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_READ 0
-/* Set this to 1 if you need to send control replies which are generated
- * "on the fly" when usbFunctionRead() is called. If you only want to send
- * data from a static buffer, set it to 0 and return the data from
- * usbFunctionSetup(). This saves a couple of bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
-/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
- * You must implement the function usbFunctionWriteOut() which receives all
- * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
- * can be found in 'usbRxToken'.
- */
-#define USB_CFG_HAVE_FLOWCONTROL 0
-/* Define this to 1 if you want flowcontrol over USB data. See the definition
- * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
- * usbdrv.h.
- */
-#define USB_CFG_DRIVER_FLASH_PAGE 0
-/* If the device has more than 64 kBytes of flash, define this to the 64 k page
- * where the driver's constants (descriptors) are located. Or in other words:
- * Define this to 1 for boot loaders on the ATMega128.
- */
-#define USB_CFG_LONG_TRANSFERS 0
-/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
- * in a single control-in or control-out transfer. Note that the capability
- * for long transfers increases the driver size.
- */
-/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
-/* This macro is a hook if you want to do unconventional things. If it is
- * defined, it's inserted at the beginning of received message processing.
- * If you eat the received message and don't want default processing to
- * proceed, do a return after doing your things. One possible application
- * (besides debugging) is to flash a status LED on each packet.
- */
-/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
-/* This macro is a hook if you need to know when an USB RESET occurs. It has
- * one parameter which distinguishes between the start of RESET state and its
- * end.
- */
-/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
-/* This macro (if defined) is executed when a USB SET_ADDRESS request was
- * received.
- */
-#define USB_COUNT_SOF 1
-/* define this macro to 1 if you need the global variable "usbSofCount" which
- * counts SOF packets. This feature requires that the hardware interrupt is
- * connected to D- instead of D+.
- */
-/* #ifdef __ASSEMBLER__
- * macro myAssemblerMacro
- * in YL, TCNT0
- * sts timer0Snapshot, YL
- * endm
- * #endif
- * #define USB_SOF_HOOK myAssemblerMacro
- * This macro (if defined) is executed in the assembler module when a
- * Start Of Frame condition is detected. It is recommended to define it to
- * the name of an assembler macro which is defined here as well so that more
- * than one assembler instruction can be used. The macro may use the register
- * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
- * immediately after an SOF pulse may be lost and must be retried by the host.
- * What can you do with this hook? Since the SOF signal occurs exactly every
- * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
- * designs running on the internal RC oscillator.
- * Please note that Start Of Frame detection works only if D- is wired to the
- * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
- */
-#define USB_CFG_CHECK_DATA_TOGGLING 0
-/* define this macro to 1 if you want to filter out duplicate data packets
- * sent by the host. Duplicates occur only as a consequence of communication
- * errors, when the host does not receive an ACK. Please note that you need to
- * implement the filtering yourself in usbFunctionWriteOut() and
- * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
- * for each control- and out-endpoint to check for duplicate packets.
- */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
-/* define this macro to 1 if you want the function usbMeasureFrameLength()
- * compiled in. This function can be used to calibrate the AVR's RC oscillator.
- */
-#define USB_USE_FAST_CRC 0
-/* The assembler module has two implementations for the CRC algorithm. One is
- * faster, the other is smaller. This CRC routine is only used for transmitted
- * messages where timing is not critical. The faster routine needs 31 cycles
- * per byte while the smaller one needs 61 to 69 cycles. The faster routine
- * may be worth the 32 bytes bigger code size if you transmit lots of data and
- * run the AVR close to its limit.
- */
-
-/* -------------------------- Device Description --------------------------- */
-
-#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
-/* USB vendor ID for the device, low byte first. If you have registered your
- * own Vendor ID, define it here. Otherwise you may use one of obdev's free
- * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
-/* This is the ID of the product, low byte first. It is interpreted in the
- * scope of the vendor ID. If you have registered your own VID with usb.org
- * or if you have licensed a PID from somebody else, define it here. Otherwise
- * you may use one of obdev's free shared VID/PID pairs. See the file
- * USB-IDs-for-free.txt for details!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_VERSION 0x00, 0x01
-/* Version number of the device: Minor number first, then major number.
- */
-#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.'
-#define USB_CFG_VENDOR_NAME_LEN 6
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'H', 'H', 'K', 'B', ' ', 'm', 'o', 'd'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
-#define USB_CFG_DEVICE_CLASS 0
-#define USB_CFG_DEVICE_SUBCLASS 0
-/* See USB specification if you want to conform to an existing device class.
- * Class 0xff is "vendor specific".
- */
-#define USB_CFG_INTERFACE_CLASS 3 /* HID */
-#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
-#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
-/* See USB specification if you want to conform to an existing device class or
- * protocol. The following classes must be set at interface level:
- * HID class is 3, no subclass and protocol required (but may be useful!)
- * CDC class is 2, use subclass 2 and protocol 1 for ACM
- */
-#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
-/* Define this to the length of the HID report descriptor, if you implement
- * an HID device. Otherwise don't define it or define it to 0.
- * If you use this define, you must add a PROGMEM character array named
- * "usbHidReportDescriptor" to your code which contains the report descriptor.
- * Don't forget to keep the array and this define in sync!
- */
-
-/* #define USB_PUBLIC static */
-/* Use the define above if you #include usbdrv.c instead of linking against it.
- * This technique saves a couple of bytes in flash memory.
- */
-
-/* ------------------- Fine Control over USB Descriptors ------------------- */
-/* If you don't want to use the driver's default USB descriptors, you can
- * provide our own. These can be provided as (1) fixed length static data in
- * flash memory, (2) fixed length static data in RAM or (3) dynamically at
- * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
- * information about this function.
- * Descriptor handling is configured through the descriptor's properties. If
- * no properties are defined or if they are 0, the default descriptor is used.
- * Possible properties are:
- * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
- * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
- * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
- * you want RAM pointers.
- * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
- * in static memory is in RAM, not in flash memory.
- * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
- * the driver must know the descriptor's length. The descriptor itself is
- * found at the address of a well known identifier (see below).
- * List of static descriptor names (must be declared PROGMEM if in flash):
- * char usbDescriptorDevice[];
- * char usbDescriptorConfiguration[];
- * char usbDescriptorHidReport[];
- * char usbDescriptorString0[];
- * int usbDescriptorStringVendor[];
- * int usbDescriptorStringDevice[];
- * int usbDescriptorStringSerialNumber[];
- * Other descriptors can't be provided statically, they must be provided
- * dynamically at runtime.
- *
- * Descriptor properties are or-ed or added together, e.g.:
- * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
- *
- * The following descriptors are defined:
- * USB_CFG_DESCR_PROPS_DEVICE
- * USB_CFG_DESCR_PROPS_CONFIGURATION
- * USB_CFG_DESCR_PROPS_STRINGS
- * USB_CFG_DESCR_PROPS_STRING_0
- * USB_CFG_DESCR_PROPS_STRING_VENDOR
- * USB_CFG_DESCR_PROPS_STRING_PRODUCT
- * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
- * USB_CFG_DESCR_PROPS_HID
- * USB_CFG_DESCR_PROPS_HID_REPORT
- * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
- *
- * Note about string descriptors: String descriptors are not just strings, they
- * are Unicode strings prefixed with a 2 byte header. Example:
- * int serialNumberDescriptor[] = {
- * USB_STRING_DESCRIPTOR_HEADER(6),
- * 'S', 'e', 'r', 'i', 'a', 'l'
- * };
- */
-
-#define USB_CFG_DESCR_PROPS_DEVICE 0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
-#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID 0
-#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
-#define USB_CFG_DESCR_PROPS_UNKNOWN 0
-
-/* ----------------------- Optional MCU Description ------------------------ */
-
-/* The following configurations have working defaults in usbdrv.h. You
- * usually don't need to set them explicitly. Only if you want to run
- * the driver on a device which is not yet supported or with a compiler
- * which is not fully supported (such as IAR C) or if you use a differnt
- * interrupt than INT0, you may have to define some of these.
- */
-/* #define USB_INTR_CFG MCUCR */
-/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
-/* #define USB_INTR_CFG_CLR 0 */
-/* #define USB_INTR_ENABLE GIMSK */
-/* #define USB_INTR_ENABLE_BIT INT0 */
-/* #define USB_INTR_PENDING GIFR */
-/* #define USB_INTR_PENDING_BIT INTF0 */
-/* #define USB_INTR_VECTOR INT0_vect */
-
-/* Set INT1 for D- falling edge to count SOF */
-/* #define USB_INTR_CFG EICRA */
-#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
-/* #define USB_INTR_CFG_CLR 0 */
-/* #define USB_INTR_ENABLE EIMSK */
-#define USB_INTR_ENABLE_BIT INT1
-/* #define USB_INTR_PENDING EIFR */
-#define USB_INTR_PENDING_BIT INTF1
-#define USB_INTR_VECTOR INT1_vect
-
-#endif /* __usbconfig_h_included__ */