summaryrefslogtreecommitdiff
path: root/digital/avr/modules/usb/lufa/Projects/Magstripe/Magstripe.txt
blob: d91fddde7fef216139c723eb27679d54cc6c153e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */
 
/** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project
 * 
 *  Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card
 *  reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed
 *  to be used with the open source Stripe Snoop project at http://stripesnoop.sourceforge.net/.
 * 
 *  See http://ossguy.com/ss_usb/ for the USB reader hardware project website,
 *  including construction and support details.
 * 
 *  To use, connect your magentic card reader device to the USB AVR as follows (pin and port mapping may be adjusted
 *  from the project makefile):
 * 
 *  <table>
 *   <tr>
 *    <td><b>Signal:</b></td>
 *    <td><b>AVR Port:</b></td>
 *   </tr>
 *   <tr>
 *    <td>Track 1 Data</td>
 *    <td>PORTC, Pin 1</td>
 *   </tr>
 *   <tr>
 *    <td>Track 1 Clock</td>
 *    <td>PORTC, Pin 2</td>
 *   </tr>
 *   <tr>
 *    <td>Track 2 Data</td>
 *    <td>PORTC, Pin 3</td>
 *   </tr>
 *   <tr>
 *    <td>Track 2 Clock</td>
 *    <td>PORTC, Pin 0</td>
 *   </tr>
 *   <tr>
 *    <td>Track 3 Data</td>
 *    <td>PORTC, Pin 5</td>
 *   </tr>
 *   <tr>
 *    <td>Track 3 Clock</td>
 *    <td>PORTC, Pin 6</td>
 *   </tr>
 *   <tr>
 *    <td>Card Detect</td>
 *    <td>PORTC, Pin 4</td>
 *   </tr>
 *  </table>
 *
 * 
 *  This project is based on the LUFA Keyboard demonstration application,
 *  written by Denver Gingerich.
 *
 *  This application uses a keyboard HID driver to communicate the data collected
 *  a TTL magnetic stripe reader to the connected computer. The raw bitstream
 *  obtained from the magnetic stripe reader is "typed" through the keyboard
 *  driver as 0's and 1's. After every card swipe, the demo will send a return key.
 *
 * <table>
 *  <tr>
 *   <td><b>USB Mode:</b></td>
 *   <td>Device</td>
 *  </tr>
 *  <tr>
 *   <td><b>USB Class:</b></td>
 *   <td>Human Interface Device (HID)</td>
 *  </tr>
 *  <tr> 
 *   <td><b>USB Subclass:</b></td>
 *   <td>Keyboard</td>
 *  </tr>
 *  <tr>
 *   <td><b>Relevant Standards:</b></td>
 *   <td>USBIF HID Standard, USBIF HID Usage Tables</td>
 *  </tr>
 *  <tr>
 *   <td><b>Usable Speeds:</b></td>
 *   <td>Low Speed Mode, Full Speed Mode</td>
 *  </tr>
 * </table>
 */