aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/stm32-h103/usart/usart.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/stm32/stm32-h103/usart/usart.c')
-rw-r--r--examples/stm32/stm32-h103/usart/usart.c82
1 files changed, 82 insertions, 0 deletions
diff --git a/examples/stm32/stm32-h103/usart/usart.c b/examples/stm32/stm32-h103/usart/usart.c
new file mode 100644
index 0000000..4470348
--- /dev/null
+++ b/examples/stm32/stm32-h103/usart/usart.c
@@ -0,0 +1,82 @@
+/*
+ * This file is part of the libopenstm32 project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libopenstm32/rcc.h>
+#include <libopenstm32/gpio.h>
+#include <libopenstm32/usart.h>
+
+void clock_setup(void)
+{
+ rcc_clock_setup_in_hse_8mhz_out_72mhz();
+
+ /* Enable GPIOC clock. */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
+
+ /* Enable clocks for GPIO port B (for GPIO_USART3_TX) and USART3. */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
+ rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART3EN);
+}
+
+void usart_setup(void)
+{
+ /* Setup GPIO pin GPIO_USART3_TX/GPIO10 on GPIO port B for transmit. */
+ gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
+ GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART3_TX);
+
+ /* Setup UART parameters. */
+ usart_set_baudrate(USART3, 38400);
+ usart_set_databits(USART3, 8);
+ usart_set_stopbits(USART3, USART_STOPBITS_1);
+ usart_set_mode(USART3, USART_MODE_TX);
+ usart_set_parity(USART3, USART_PARITY_NONE);
+ usart_set_flow_control(USART3, USART_FLOWCONTROL_NONE);
+
+ /* Finally enable the USART. */
+ usart_enable(USART3);
+}
+
+void gpio_setup(void)
+{
+ /* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
+ gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
+ GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
+}
+
+int main(void)
+{
+ int i, j = 0, c = 0;
+
+ clock_setup();
+ gpio_setup();
+ usart_setup();
+
+ /* Blink the LED (PC12) on the board with every transmitted byte. */
+ while (1) {
+ gpio_toggle(GPIOC, GPIO12); /* LED on/off */
+ usart_send_blocking(USART3, c + '0'); /* Send one byte on USART3. */
+ c = (c == 9) ? 0 : c + 1; /* Increment c. */
+ if ((j++ % 80) == 0) { /* Newline after line full. */
+ usart_send_blocking(USART3, '\r');
+ usart_send_blocking(USART3, '\n');
+ }
+ for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
+ }
+
+ return 0;
+}