aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/stm32-h103/usart_printf/usart_printf.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/stm32/f1/stm32-h103/usart_printf/usart_printf.c')
-rw-r--r--examples/stm32/f1/stm32-h103/usart_printf/usart_printf.c108
1 files changed, 108 insertions, 0 deletions
diff --git a/examples/stm32/f1/stm32-h103/usart_printf/usart_printf.c b/examples/stm32/f1/stm32-h103/usart_printf/usart_printf.c
new file mode 100644
index 0000000..1eb067f
--- /dev/null
+++ b/examples/stm32/f1/stm32-h103/usart_printf/usart_printf.c
@@ -0,0 +1,108 @@
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
+ * 2011 Piotr Esden-Tempski <piotr@esden.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libopencm3/stm32/f1/rcc.h>
+#include <libopencm3/stm32/f1/gpio.h>
+#include <libopencm3/stm32/usart.h>
+#include <libopencm3/stm32/nvic.h>
+
+#include <stdio.h>
+#include <errno.h>
+
+void clock_setup(void)
+{
+ rcc_clock_setup_in_hse_8mhz_out_72mhz();
+
+ /* Enable GPIOA clock (for LED GPIOs). */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
+
+ /* Enable clocks for GPIO port A (for GPIO_USART1_TX) and USART1. */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN |
+ RCC_APB2ENR_AFIOEN |
+ RCC_APB2ENR_USART1EN);
+}
+
+void usart_setup(void)
+{
+ /* Setup GPIO pin GPIO_USART1_RE_TX on GPIO port B for transmit. */
+ gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
+ GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_TX);
+
+ /* Setup UART parameters. */
+ usart_set_baudrate(USART1, 230400, rcc_ppre2_frequency);
+ usart_set_databits(USART1, 8);
+ usart_set_stopbits(USART1, USART_STOPBITS_1);
+ usart_set_parity(USART1, USART_PARITY_NONE);
+ usart_set_flow_control(USART1, USART_FLOWCONTROL_NONE);
+ usart_set_mode(USART1, USART_MODE_TX);
+
+ /* Finally enable the USART. */
+ usart_enable(USART1);
+}
+
+void gpio_setup(void)
+{
+ gpio_set(GPIOC, GPIO12);
+
+ /* Setup GPIO6 and 7 (in GPIO port A) for led use. */
+ gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
+ GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
+}
+
+int _write (int file, char *ptr, int len)
+{
+ int i;
+
+ if (file == 1) {
+ for (i = 0; i < len; i++){
+ usart_send_blocking(USART1, ptr[i]);
+ }
+
+ return i;
+ }
+
+ errno = EIO;
+ return -1;
+}
+
+int main(void)
+{
+ int counter = 0;
+ float fcounter = 0.0;
+ double dcounter = 0.0;
+
+ clock_setup();
+ gpio_setup();
+ usart_setup();
+
+ /*
+ * Write Hello World an integer, float and double all over
+ * again while incrementing the numbers.
+ */
+ while (1) {
+ gpio_toggle(GPIOC, GPIO12);
+ printf("Hello World! %i %f %f\r\n", counter, fcounter, dcounter);
+ counter++;
+ fcounter+=0.01;
+ dcounter+=0.01;
+ }
+
+ return 0;
+}