aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/stm32-h103/exti_both/exti_both.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/stm32/f1/stm32-h103/exti_both/exti_both.c')
-rw-r--r--examples/stm32/f1/stm32-h103/exti_both/exti_both.c92
1 files changed, 92 insertions, 0 deletions
diff --git a/examples/stm32/f1/stm32-h103/exti_both/exti_both.c b/examples/stm32/f1/stm32-h103/exti_both/exti_both.c
new file mode 100644
index 0000000..7c6f9c7
--- /dev/null
+++ b/examples/stm32/f1/stm32-h103/exti_both/exti_both.c
@@ -0,0 +1,92 @@
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
+ * 2010 Piotr Esden-Tempski <piotr@esden.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libopencm3/stm32/f1/rcc.h>
+#include <libopencm3/stm32/f1/gpio.h>
+#include <libopencm3/stm32/nvic.h>
+#include <libopencm3/stm32/exti.h>
+
+u16 exti_line_state;
+
+/* Set STM32 to 72 MHz. */
+void clock_setup(void)
+{
+ rcc_clock_setup_in_hse_8mhz_out_72mhz();
+
+}
+
+void gpio_setup(void)
+{
+ /* Enable GPIOC clock. */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
+
+ /* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
+ gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
+ GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
+}
+
+void exti_setup(void)
+{
+ /* Enable GPIOA clock. */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
+
+ /* Enable AFIO clock. */
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);
+
+ /* Enable EXTI0 interrupt */
+ nvic_enable_irq(NVIC_EXTI0_IRQ);
+
+ /* Set GPIO0 (in GPIO port A) to 'input float'. */
+ gpio_set_mode(GPIOA, GPIO_MODE_INPUT,
+ GPIO_CNF_INPUT_FLOAT, GPIO0);
+
+ /* configure EXTI subsystem */
+ exti_select_source(EXTI0, GPIOA);
+ exti_set_trigger(EXTI0, EXTI_TRIGGER_BOTH);
+ exti_enable_request(EXTI0);
+}
+
+void exti0_isr()
+{
+ exti_line_state = GPIOA_IDR;
+
+ if ((exti_line_state & (1 << 0)) != 0) {
+ gpio_clear(GPIOC, GPIO12);
+ } else {
+ gpio_set(GPIOC, GPIO12);
+ }
+
+ exti_reset_request(EXTI0);
+}
+
+int main(void)
+{
+
+ clock_setup();
+ gpio_setup();
+ exti_setup();
+
+ /* Blink the LED (PC12) on the board. */
+ while (1) {
+ __asm("nop");
+ }
+
+ return 0;
+}