aboutsummaryrefslogtreecommitdiff
path: root/examples/other/systick/README
diff options
context:
space:
mode:
Diffstat (limited to 'examples/other/systick/README')
-rw-r--r--examples/other/systick/README38
1 files changed, 1 insertions, 37 deletions
diff --git a/examples/other/systick/README b/examples/other/systick/README
index 7e9c5e5..affb4b8 100644
--- a/examples/other/systick/README
+++ b/examples/other/systick/README
@@ -3,41 +3,5 @@ README
------------------------------------------------------------------------------
This example program blinks a LED on PortB Pin 6. 1 second on / 1 second off.
-Blinking is done thru the systick timer interrupt.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
+Blinking is done via the systick timer interrupt.