aboutsummaryrefslogtreecommitdiff
path: root/examples/other/adc_temperature_sensor/README
diff options
context:
space:
mode:
Diffstat (limited to 'examples/other/adc_temperature_sensor/README')
-rw-r--r--examples/other/adc_temperature_sensor/README39
1 files changed, 1 insertions, 38 deletions
diff --git a/examples/other/adc_temperature_sensor/README b/examples/other/adc_temperature_sensor/README
index b049e10..aa00ef0 100644
--- a/examples/other/adc_temperature_sensor/README
+++ b/examples/other/adc_temperature_sensor/README
@@ -3,45 +3,8 @@ README
------------------------------------------------------------------------------
This example program sends some characters on USART1.
-Afterwards it read out the internal temperature sensor of the stm32 and
+Afterwards it read out the internal temperature sensor of the STM32 and
sends the value read out from the ADC to the USART1.
The terminal settings for the receiving device/PC are 115200 8n1.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase adc.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-