aboutsummaryrefslogtreecommitdiff
path: root/examples/mb525/pwmleds/README
diff options
context:
space:
mode:
Diffstat (limited to 'examples/mb525/pwmleds/README')
-rw-r--r--examples/mb525/pwmleds/README47
1 files changed, 47 insertions, 0 deletions
diff --git a/examples/mb525/pwmleds/README b/examples/mb525/pwmleds/README
new file mode 100644
index 0000000..08ca69d
--- /dev/null
+++ b/examples/mb525/pwmleds/README
@@ -0,0 +1,47 @@
+------------------------------------------------------------------------------
+README
+------------------------------------------------------------------------------
+
+This is a PWM based led fading example using libopenstm32.
+
+It's intended for the ST STM32-based MB525 eval board (see
+http://www.st.com/stonline/products/literature/um/13472.htm for details). It
+should blink the LED on the board.
+
+
+Building
+--------
+
+ $ make
+
+Running 'make' on the top-level libopenstm32 directory will automatically
+also build this example. Or you can build the library "manually" and
+then run 'make' in this directory.
+
+You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
+
+ $ PREFIX=arm-none-eabi make
+
+For a more verbose build you can use
+
+ $ make V=1
+
+
+Flashing
+--------
+
+You can flash the generated code on the MB525 board using OpenOCD:
+
+ $ make flash
+
+Or you can do the same manually via:
+
+ $ openocd -f interface/jlink.cfg -f board/olimex_stm32_h103.cfg
+ $ telnet localhost 4444
+ > reset halt
+ > flash write_image erase pwmleds.bin
+ > reset
+
+Replace the "jlink.cfg" with whatever JTAG device you are using, and/or
+replace "olimex_stm32_h103.cfg" with your respective board config file.
+