aboutsummaryrefslogtreecommitdiff
path: root/lib
diff options
context:
space:
mode:
authorKen Sarkies2012-07-10 09:32:47 +0930
committerKen Sarkies2012-07-10 09:32:47 +0930
commit52fd7c79768490158241260273d29e9fa86f45e8 (patch)
treef89e0ce632cc3d2dc510726404ad836e6252159a /lib
parent83d62e9bfc79e03737c2f1977004bef6e6e20562 (diff)
STM32F timers. Doxygen markup added, and some code changes:
1. Remove the extra mask (TIM_DIER(timer_peripheral) & flag) in timer_get_flag. Not all flags in SR relate to IRQs and the flags that do might be useful even if interrupts not enabled. 2. In a number of functions (e.g. timer_set_output_idle_state) that only apply to advanced timers, add test for TIM1 and TIM8, as done in some others. 3. Added timer_force_event to manipulate the EG register TBD DMA burst - can't get my head around why this would be useful. Someone must have thought so!
Diffstat (limited to 'lib')
-rw-r--r--lib/stm32/f1/timer.c900
1 files changed, 890 insertions, 10 deletions
diff --git a/lib/stm32/f1/timer.c b/lib/stm32/f1/timer.c
index cf5b411..11cb954 100644
--- a/lib/stm32/f1/timer.c
+++ b/lib/stm32/f1/timer.c
@@ -1,3 +1,71 @@
+/** @file
+
+@ingroup STM32F1xx
+
+@brief <b>libopencm3 STM32F1xx Timers</b>
+
+@version 1.0.0
+
+@author @htmlonly &copy; @endhtmlonly 2010 Edward Cheeseman <evbuilder@users.sourceforge.org>
+
+@date 8 July 2012
+
+This library supports the General Purpose and Advanced Control Timers for
+the STM32F1xx series of ARM Cortex Microcontrollers by ST Microelectronics.
+
+The STM32F1xx series have four general purpose timers (2-5), while some have
+an additional two advanced timers (1,8), and some have two basic timers (6,7).
+Some of the larger devices have additional general purpose timers (9-14).
+
+@todo Add timer DMA burst settings
+
+@section tim_api_ex Basic TIMER handling API.
+
+Enable the timer clock first. The timer mode sets the clock division ratio,
+the count alignment (edge or centred) and count direction. Finally enable the timer.
+
+The timer output compare block produces a signal that can be configured for
+output to a pin or passed to other peripherals for use as a trigger. In all cases
+the output compare mode must be set to define how the output responds to a compare
+match, and the output must be enabled. If output to a pin is required, enable the
+appropriate GPIO clock and set the pin to alternate output mode.
+
+Example: Timer 2 with 2x clock divide, edge aligned and up counting.
+@code
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_TIM2EN);
+ timer_reset(TIM2);
+ timer_set_mode(TIM2, TIM_CR1_CKD_CK_INT_MUL_2,
+ TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP);
+ ...
+ timer_set_period(TIM2, 1000);
+ timer_enable_counter(TIM2);
+@endcode
+Example: Timer 1 with PWM output, no clock divide and centre alignment. Set the
+Output Compare mode to PWM and enable the output of channel 1. Note that for the
+advanced timers the break functionality must be enabled before the signal will
+appear at the output, even though break is not being used. This is in addition to
+the normal output enable. Enable the alternate function clock (APB2 only) and port A
+clock. Set ports A8 and A9 (timer 1 channel 1 compare outputs) to alternate function
+push-pull outputs where the PWM output will appear.
+
+@code
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN | RCC_APB2ENR_AFIOEN);
+ gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
+ GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO8 | GPIO9);
+ rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_TIM1EN);
+ timer_reset(TIM1);
+ timer_set_mode(TIM1, TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_CENTER_1, TIM_CR1_DIR_UP);
+ timer_set_oc_mode(TIM1, TIM_OC1, TIM_OCM_PWM2);
+ timer_enable_oc_output(TIM1, TIM_OC1);
+ timer_enable_break_main_output(TIM1);
+ timer_set_oc_value(TIM1, TIM_OC1, 200);
+ timer_set_period(TIM1, 1000);
+ timer_enable_counter(TIM1);
+@endcode
+
+@todo input capture example
+
+*/
/*
* This file is part of the libopencm3 project.
*
@@ -28,6 +96,17 @@
#include <libopencm3/stm32/timer.h>
#include <libopencm3/stm32/f1/rcc.h>
+/*---------------------------------------------------------------------------*/
+/** @brief Reset a Timer.
+
+The counter and all its associated configuration registers
+are placed in the reset condition. The reset is effected via the RCC peripheral reset
+system.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+ (TIM9 .. TIM14 not yet supported here).
+*/
+
void timer_reset(u32 timer_peripheral)
{
switch (timer_peripheral) {
@@ -93,31 +172,84 @@ void timer_reset(u32 timer_peripheral)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Interrupts for a Timer
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] irq Unsigned int32. @ref tim_irq_enable. Logical OR of all interrupt enable bits to be set
+*/
+
void timer_enable_irq(u32 timer_peripheral, u32 irq)
{
TIM_DIER(timer_peripheral) |= irq;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Interrupts for a Timer.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] irq Unsigned int32. @ref tim_irq_enable. Logical OR of all interrupt enable bits to be cleared
+*/
+
void timer_disable_irq(u32 timer_peripheral, u32 irq)
{
TIM_DIER(timer_peripheral) &= ~irq;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Read a Status Flag.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] flag Unsigned int32. Status register flag @ref tim_sr_values.
+@returns boolean: flag set.
+*/
+
bool timer_get_flag(u32 timer_peripheral, u32 flag)
{
- if (((TIM_SR(timer_peripheral) & flag) != 0) &&
- ((TIM_DIER(timer_peripheral) & flag) != 0)) {
+ if ((TIM_SR(timer_peripheral) & flag) != 0) {
return true;
}
return false;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Clear a Status Flag.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] flag Unsigned int32. @ref tim_sr_values. Status register flag.
+*/
+
void timer_clear_flag(u32 timer_peripheral, u32 flag)
{
TIM_SR(timer_peripheral) &= ~flag;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Timer Mode.
+
+The modes are:
+
+@li Clock divider ratio (to form the sampling clock for the input filters,
+and the dead-time clock in the advanced timers 1 and 8)
+@li Edge/centre alignment
+@li Count direction
+
+The alignment and count direction are effective only for timers 1 to 5 and 8
+while the clock divider ratio is effective for all timers except 6,7
+The remaining timers are limited hardware timers which do not support these mode
+settings.
+
+@note: When center alignment mode is selected, count direction is controlled by
+hardware and cannot be written. The count direction setting has no effect
+in this case.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base (TIM1, TIM2 ... TIM5, TIM8)
+@param[in] clock_div Unsigned int32. Clock Divider Ratio in bits 8,9: @ref tim_x_cr1_cdr
+@param[in] alignment Unsigned int32. Alignment bits in 5,6: @ref tim_x_cr1_cms
+@param[in] direction Unsigned int32. Count direction in bit 4,: @ref tim_x_cr1_dir
+*/
+
void timer_set_mode(u32 timer_peripheral, u32 clock_div,
u32 alignment, u32 direction)
{
@@ -132,6 +264,16 @@ void timer_set_mode(u32 timer_peripheral, u32 clock_div,
TIM_CR1(timer_peripheral) = cr1;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Input Filter and Dead-time Clock Divider Ratio.
+
+This forms the sampling clock for the input filters and the dead-time clock
+in the advanced timers 1 and 8, by division from the timer clock.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] clock_div Unsigned int32. Clock Divider Ratio in bits 8,9: @ref tim_x_cr1_cdr
+*/
+
void timer_set_clock_division(u32 timer_peripheral, u32 clock_div)
{
clock_div &= TIM_CR1_CKD_CK_INT_MASK;
@@ -139,16 +281,44 @@ void timer_set_clock_division(u32 timer_peripheral, u32 clock_div)
TIM_CR1(timer_peripheral) |= clock_div;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Auto-Reload Buffering.
+
+During counter operation this causes the counter to be loaded from its
+auto-reload register only at the next update event.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_enable_preload(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) |= TIM_CR1_ARPE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Auto-Reload Buffering.
+
+This causes the counter to be loaded immediately with a new count value when the
+auto-reload register is written, so that the new value becomes effective for the
+current count cycle rather than for the cycle following an update event.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_disable_preload(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) &= ~TIM_CR1_ARPE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Specify the counter alignment mode.
+
+The mode can be edge aligned or centered.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] alignment Unsigned int32. Alignment bits in 5,6: @ref tim_x_cr1_cms
+*/
+
void timer_set_alignment(u32 timer_peripheral, u32 alignment)
{
alignment &= TIM_CR1_CMS_MASK;
@@ -156,128 +326,368 @@ void timer_set_alignment(u32 timer_peripheral, u32 alignment)
TIM_CR1(timer_peripheral) |= alignment;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Timer to Count Up.
+
+This has no effect if the timer is set to center aligned.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_direction_up(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) &= ~TIM_CR1_DIR_DOWN;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Timer to Count Down.
+
+This has no effect if the timer is set to center aligned.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_direction_down(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) |= TIM_CR1_DIR_DOWN;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable the Timer for One Cycle and Stop.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_one_shot_mode(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) |= TIM_CR1_OPM;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable the Timer to Run Continuously.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_continuous_mode(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) &= ~TIM_CR1_OPM;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Timer to Generate Update IRQ or DMA on any Event.
+
+The events which will generate an interrupt or DMA request can be
+@li a counter underflow/overflow,
+@li a forced update,
+@li an event from the slave mode controller.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_update_on_any(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) &= ~TIM_CR1_URS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Timer to Generate Update IRQ or DMA only from Under/Overflow Events.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_update_on_overflow(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) |= TIM_CR1_URS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Timer Update Events.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_enable_update_event(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) &= ~TIM_CR1_UDIS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Timer Update Events.
+
+Update events are not generated and the shadow registers keep their values.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_disable_update_event(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) |= TIM_CR1_UDIS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable the timer to start counting.
+
+This should be called after the timer initial configuration has been completed.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_enable_counter(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) |= TIM_CR1_CEN;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Stop the timer from counting.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_disable_counter(u32 timer_peripheral)
{
TIM_CR1(timer_peripheral) &= ~TIM_CR1_CEN;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Timer Output Idle States High.
+
+This determines the value of the timer output compare when it enters idle state.
+
+@sa @ref timer_set_oc_idle_state_set
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] outputs Unsigned int32. Timer Output Idle State Controls @ref tim_x_cr2_ois.
+If several settings are to be made, use the logical OR of the output control values.
+*/
+
void timer_set_output_idle_state(u32 timer_peripheral, u32 outputs)
{
- TIM_CR2(timer_peripheral) |= outputs & TIM_CR2_OIS_MASK;
+ if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
+ TIM_CR2(timer_peripheral) |= outputs & TIM_CR2_OIS_MASK;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Timer Output Idle States Low.
+
+This determines the value of the timer output compare when it enters idle state.
+
+@sa @ref timer_set_oc_idle_state_unset
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] outputs Unsigned int32. Timer Output Idle State Controls @ref tim_x_cr2_ois
+*/
+
void timer_reset_output_idle_state(u32 timer_peripheral, u32 outputs)
{
- TIM_CR2(timer_peripheral) &= ~(outputs & TIM_CR2_OIS_MASK);
+ if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
+ TIM_CR2(timer_peripheral) &= ~(outputs & TIM_CR2_OIS_MASK);
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Timer 1 Input to XOR of Three Channels.
+
+The first timer capture input is formed from the XOR of the first three timer input
+channels 1, 2, 3.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_set_ti1_ch123_xor(u32 timer_peripheral)
{
TIM_CR2(timer_peripheral) |= TIM_CR2_TI1S;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Timer 1 Input to Channel 1.
+
+The first timer capture input is taken from the timer input channel 1 only.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_set_ti1_ch1(u32 timer_peripheral)
{
TIM_CR2(timer_peripheral) &= ~TIM_CR2_TI1S;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Master Mode
+
+This sets the Trigger Output TRGO for synchronizing with slave timers or passing as
+an internal trigger to the ADC or DAC.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] mode Unsigned int32. Master Mode @ref tim_mastermode
+*/
+
void timer_set_master_mode(u32 timer_peripheral, u32 mode)
{
TIM_CR2(timer_peripheral) &= ~TIM_CR2_MMS_MASK;
TIM_CR2(timer_peripheral) |= mode;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Timer DMA Requests on Capture/Compare Events.
+
+Capture/compare events will cause DMA requests to be generated.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_set_dma_on_compare_event(u32 timer_peripheral)
{
TIM_CR2(timer_peripheral) &= ~TIM_CR2_CCDS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Timer DMA Requests on Update Events.
+
+Update events will cause DMA requests to be generated.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_set_dma_on_update_event(u32 timer_peripheral)
{
TIM_CR2(timer_peripheral) |= TIM_CR2_CCDS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Timer Capture/Compare Control Update with Trigger.
+
+If the capture/compare control bits CCxE, CCxNE and OCxM are set to be
+preloaded, they are updated by software setting the COM bit (@ref ) or when a
+rising edge occurs on the trigger input TRGI.
+
+@note This setting is only valid for the advanced timer channels with complementary
+outputs.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_enable_compare_control_update_on_trigger(u32 timer_peripheral)
{
- TIM_CR2(timer_peripheral) |= TIM_CR2_CCUS;
+ if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
+ TIM_CR2(timer_peripheral) |= TIM_CR2_CCUS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Timer Capture/Compare Control Update with Trigger.
+
+If the capture/compare control bits CCxE, CCxNE and OCxM are set to be
+preloaded, they are updated by software setting the COM bit (@ref ).
+
+@note This setting is only valid for the advanced timer channels with complementary
+outputs.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_disable_compare_control_update_on_trigger(u32 timer_peripheral)
{
- TIM_CR2(timer_peripheral) &= ~TIM_CR2_CCUS;
+ if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
+ TIM_CR2(timer_peripheral) &= ~TIM_CR2_CCUS;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Timer Capture/Compare Control Preload.
+
+The capture/compare control bits CCxE, CCxNE and OCxM are set to be preloaded
+when a COM event occurs.
+
+@note This setting is only valid for the advanced timer channels with complementary
+outputs.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_enable_preload_complementry_enable_bits(u32 timer_peripheral)
{
- TIM_CR2(timer_peripheral) |= TIM_CR2_CCPC;
+ if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
+ TIM_CR2(timer_peripheral) |= TIM_CR2_CCPC;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Timer Capture/Compare Control Preload.
+
+The capture/compare control bits CCxE, CCxNE and OCxM preload is disabled.
+
+@note This setting is only valid for the advanced timer channels with complementary
+outputs.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+*/
+
void timer_disable_preload_complementry_enable_bits(u32 timer_peripheral)
{
- TIM_CR2(timer_peripheral) &= ~TIM_CR2_CCPC;
+ if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
+ TIM_CR2(timer_peripheral) &= ~TIM_CR2_CCPC;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Value for the Timer Prescaler.
+
+The timer clock is prescaled by the 16 bit scale value plus 1.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] value Unsigned int32. Prescaler values 0...0xFFFF.
+*/
+
void timer_set_prescaler(u32 timer_peripheral, u32 value)
{
TIM_PSC(timer_peripheral) = value;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set the Value for the Timer Repetition Counter.
+
+A timer update event is generated only after the specified number of repeat
+count cycles have been completed.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] value Unsigned int32. Repetition values 0...0xFF.
+*/
+
void timer_set_repetition_counter(u32 timer_peripheral, u32 value)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_RCR(timer_peripheral) = value;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Set Period
+
+Specify the timer period in the auto-reload register.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] period Unsigned int32. Period in counter clock ticks.
+*/
+
void timer_set_period(u32 timer_peripheral, u32 period)
{
TIM_ARR(timer_peripheral) = period;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Enable the Output Compare Clear Function
+
+When this is enabled, the output compare signal is cleared when a high is detected
+on the external trigger input. This works in the output compare and PWM modes only
+(not forced mode).
+The output compare signal remains off until the next update event.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+*/
+
void timer_enable_oc_clear(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -296,11 +706,19 @@ void timer_enable_oc_clear(u32 timer_peripheral, enum tim_oc_id oc_id)
case TIM_OC1N:
case TIM_OC2N:
case TIM_OC3N:
- /* Ignoring as fast enable only applies to the whole channel. */
+ /* Ignoring as oc clear enable only applies to the whole channel. */
break;
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Disable the Output Compare Clear Function
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+*/
+
void timer_disable_oc_clear(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -319,11 +737,24 @@ void timer_disable_oc_clear(u32 timer_peripheral, enum tim_oc_id oc_id)
case TIM_OC1N:
case TIM_OC2N:
case TIM_OC3N:
- /* Ignoring as fast enable only applies to the whole channel. */
+ /* Ignoring as oc clear enable only applies to the whole channel. */
break;
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Enable the Output Compare Fast Mode
+
+When this is enabled, the output compare signal is forced to the compare state
+by a trigger input, independently of the compare match. This speeds up the
+setting of the output compare to 3 clock cycles as opposed to at least 5 in the
+slow mode. This works in the PWM1 and PWM2 modes only.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+*/
+
void timer_set_oc_fast_mode(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -347,6 +778,17 @@ void timer_set_oc_fast_mode(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Enable the Output Compare Slow Mode
+
+This disables the fast compare mode and the output compare depends on the
+counter and compare register values.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+*/
+
void timer_set_oc_slow_mode(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -370,6 +812,29 @@ void timer_set_oc_slow_mode(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Set Output Compare Mode
+
+Specifies how the comparator output will respond to a compare match. The mode can be:
+@li Frozen - the output does not respond to a match.
+@li Active - the output assumes the active state on the first match.
+@li Inactive - the output assumes the inactive state on the first match.
+@li Toggle - The output switches between active and inactive states on each match.
+@li Force inactive. The output is forced low regardless of the compare state.
+@li Force active. The output is forced high regardless of the compare state.
+@li PWM1 - The output is active when the counter is less than the compare register contents
+and inactive otherwise.
+@li PWM2 - The output is inactive when the counter is less than the compare register contents
+and active otherwise.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+@param[in] oc_mode enum ::tim_oc_mode. OC mode designators.
+ TIM_OCM_FROZEN, TIM_OCM_ACTIVE, TIM_OCM_INACTIVE, TIM_OCM_TOGGLE,
+ TIM_OCM_FORCE_LOW, TIM_OCM_FORCE_HIGH, TIM_OCM_PWM1, TIM_OCM_PWM2
+*/
+
void timer_set_oc_mode(u32 timer_peripheral, enum tim_oc_id oc_id,
enum tim_oc_mode oc_mode)
{
@@ -510,6 +975,14 @@ void timer_set_oc_mode(u32 timer_peripheral, enum tim_oc_id oc_id,
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Enable the Output Compare Preload Register
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+*/
+
void timer_enable_oc_preload(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -533,6 +1006,14 @@ void timer_enable_oc_preload(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Disable the Output Compare Preload Register
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action)
+*/
+
void timer_disable_oc_preload(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -556,6 +1037,16 @@ void timer_disable_oc_preload(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Set the Output Polarity High
+
+The polarity of the channel output is set active high.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (only for advanced timers 1 and 8)
+*/
+
void timer_set_oc_polarity_high(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -601,6 +1092,16 @@ void timer_set_oc_polarity_high(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Set the Output Polarity Low
+
+The polarity of the channel output is set active low.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (only for advanced timers 1 and 8)
+*/
+
void timer_set_oc_polarity_low(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -646,6 +1147,16 @@ void timer_set_oc_polarity_low(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Enable the Output Compare
+
+The channel output compare functionality is enabled.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (only for advanced timers 1 and 8)
+*/
+
void timer_enable_oc_output(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -691,6 +1202,16 @@ void timer_enable_oc_output(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Disable the Output Compare
+
+The channel output compare functionality is disabled.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (only for advanced timers 1 and 8)
+*/
+
void timer_disable_oc_output(u32 timer_peripheral, enum tim_oc_id oc_id)
{
switch (oc_id) {
@@ -736,6 +1257,19 @@ void timer_disable_oc_output(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer set Output Compare Idle State High
+
+@sa Similar function suitable for multiple OC idle state settings
+@ref timer_set_output_idle_state
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (only for advanced timers 1 and 8)
+*/
+
void timer_set_oc_idle_state_set(u32 timer_peripheral, enum tim_oc_id oc_id)
{
/* Acting for TIM1 and TIM8 only. */
@@ -767,6 +1301,19 @@ void timer_set_oc_idle_state_set(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Set Output Compare Idle State Low
+
+@sa Similar function suitable for multiple OC idle state settings
+@ref timer_reset_output_idle_state
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (only for advanced timers 1 and 8)
+*/
+
void timer_set_oc_idle_state_unset(u32 timer_peripheral, enum tim_oc_id oc_id)
{
/* Acting for TIM1 and TIM8 only. */
@@ -798,6 +1345,19 @@ void timer_set_oc_idle_state_unset(u32 timer_peripheral, enum tim_oc_id oc_id)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Timer Set Output Compare Value
+
+This is a convenience function to set the OC preload register value for loading
+to the compare register.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base @ref tim_reg_base
+ (TIM9 .. TIM14 not yet supported here).
+@param[in] oc_id enum ::tim_oc_id OC channel designators
+ TIM_OCx where x=1..4, TIM_OCxN where x=1..3 (no action taken)
+@param[in] value Unsigned int32. Compare value.
+*/
+
void timer_set_oc_value(u32 timer_peripheral, enum tim_oc_id oc_id, u32 value)
{
switch (oc_id) {
@@ -821,100 +1381,306 @@ void timer_set_oc_value(u32 timer_peripheral, enum tim_oc_id oc_id, u32 value)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Output in Break
+
+Enables the output in the Break feature of an advanced timer. This does not
+enable the break functionality itself but only sets the Master Output Enable in
+the Break and Deadtime Register.
+
+@note This setting is only valid for the advanced timers.
+
+@note It is necessary to call this function to enable the output on an advanced
+timer <b>even if break or deadtime features are not being used<\b>.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_enable_break_main_output(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= TIM_BDTR_MOE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Output in Break
+
+Disables the output in the Break feature of an advanced timer. This clears
+the Master Output Enable in the Break and Deadtime Register.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_disable_break_main_output(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) &= ~TIM_BDTR_MOE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Automatic Output in Break
+
+Enables the automatic output feature of the Break function of an advanced
+timer so that the output is re-enabled at the next update event following a
+break event.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_enable_break_automatic_output(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= TIM_BDTR_AOE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Automatic Output in Break
+
+Disables the automatic output feature of the Break function of an advanced
+timer so that the output is re-enabled at the next update event following a
+break event.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_disable_break_automatic_output(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) &= ~TIM_BDTR_AOE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Activate Break when Input High
+
+Sets the break function to activate when the break input becomes high.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_set_break_polarity_high(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= TIM_BDTR_BKP;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Activate Break when Input Low
+
+Sets the break function to activate when the break input becomes low.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_set_break_polarity_low(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) &= ~TIM_BDTR_BKP;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Break
+
+Enables the break function of an advanced timer.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_enable_break(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= TIM_BDTR_BKE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Break
+
+Disables the break function of an advanced timer.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_disable_break(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) &= ~TIM_BDTR_BKE;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Off-State in Run Mode
+
+Enables the off-state in run mode for the break function of an advanced
+timer in which the complementary outputs have been configured. It has no effect
+if no complementary output is present. When the capture-compare output is
+disabled while the complementary output is enabled, the output is set to its
+inactive level as defined by the output polarity.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_set_enabled_off_state_in_run_mode(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= TIM_BDTR_OSSR;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Off-State in Run Mode
+
+Disables the off-state in run mode for the break function of an advanced
+timer in which the complementary outputs have been configured. It has no effect
+if no complementary output is present. When the capture-compare output is
+disabled, the output is also disabled.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_set_disabled_off_state_in_run_mode(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) &= ~TIM_BDTR_OSSR;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Off-State in Idle Mode
+
+Enables the off-state in idle mode for the break function of an advanced
+timer. When the master output is disabled the output is set to its
+inactive level as defined by the output polarity.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_set_enabled_off_state_in_idle_mode(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= TIM_BDTR_OSSI;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Off-State in Idle Mode
+
+Disables the off-state in idle mode for the break function of an advanced
+timer. When the master output is disabled the output is also disabled.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+*/
+
void timer_set_disabled_off_state_in_idle_mode(u32 timer_peripheral)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) &= ~TIM_BDTR_OSSI;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Lock Bits
+
+Set the lock bits for an advanced timer. Three levels of lock providing
+protection against software errors. Once written they cannot be changed until a
+timer reset has occurred.
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+@param[in] lock Unsigned int32. Lock specification @ref tim_lock
+*/
+
void timer_set_break_lock(u32 timer_peripheral, u32 lock)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= lock;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Deadtime
+
+The deadtime and sampling clock (DTSC) is set in the clock division ratio part of the
+timer mode settings. The deadtime count is an 8 bit value defined in terms of the
+number of DTSC cycles:
+
+@li Bit 7 = 0, deadtime = bits(6:0)
+@li Bits 7:6 = 10, deadtime = 2x(64+bits(5:0))
+@li Bits 7:5 = 110, deadtime = 8x(32+bits(5:0))
+@li Bits 7:5 = 111, deadtime = 16x(32+bits(5:0))
+
+@note This setting is only valid for the advanced timers.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base TIM1 or TIM8
+@param[in] deadtime Unsigned int32. Deadtime count specification as defined above.
+*/
+
void timer_set_deadtime(u32 timer_peripheral, u32 deadtime)
{
if ((timer_peripheral == TIM1) || (timer_peripheral == TIM8))
TIM_BDTR(timer_peripheral) |= deadtime;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Force generate a timer event.
+
+The event specification consists of 8 possible events that can be forced on the
+timer. The forced events are automatically cleared by hardware. The UG event is
+useful to cause shadow registers to be preloaded before the timer is started to
+avoid uncertainties in the first cycle in case an update event may never be
+generated.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] event Unsigned int32. Event specification @ref tim_event_gen
+*/
+
void timer_generate_event(u32 timer_peripheral, u32 event)
{
TIM_EGR(timer_peripheral) |= event;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Read Counter
+
+Read back the value of a timer's counter register contents
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@returns Unsigned int32. Counter value.
+*/
+
u32 timer_get_counter(u32 timer_peripheral)
{
return TIM_CNT(timer_peripheral);
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Input Capture Filter Parameters
+
+Set the input filter parameters for an input channel, specifying:
+@li the frequency of sampling from the Deadtime and Sampling clock
+(@see @ref timer_set_clock_division)
+@li the number of events that must occur before a transition is considered valid.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+@param[in] flt ::tim_ic_filter. Input Capture Filter identifier.
+*/
+
void timer_ic_set_filter(u32 timer, enum tim_ic_id ic, enum tim_ic_filter flt)
{
switch (ic) {
@@ -937,6 +1703,16 @@ void timer_ic_set_filter(u32 timer, enum tim_ic_id ic, enum tim_ic_filter flt)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Input Capture Prescaler
+
+Set the number of events between each capture.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+@param[in] psc ::tim_ic_psc. Input Capture sample clock prescaler.
+*/
+
void timer_ic_set_prescaler(u32 timer, enum tim_ic_id ic, enum tim_ic_psc psc)
{
switch (ic) {
@@ -959,6 +1735,27 @@ void timer_ic_set_prescaler(u32 timer, enum tim_ic_id ic, enum tim_ic_psc psc)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Capture/Compare Channel Direction/Input
+
+The Capture/Compare channel is defined as output (compare) or input with the input
+mapping specified:
+
+@li channel is configured as output
+@li channel is configured as input and mapped on corresponding input
+@li channel is configured as input and mapped on alternate input
+(TI2 for channel 1, TI1 for channel 2, TI4 for channel 3, TI3 for channel 4)
+@li channel is configured as input and is mapped on TRC (requires an
+internal trigger input selected through TS bit
+
+@note not all combinations of the input and channel are valid, see datasheets.
+@note these parameters are writable only when the channel is off.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+@param[in] in ::tim_ic_input. Input Capture channel direction and source input.
+*/
+
void timer_ic_set_input(u32 timer, enum tim_ic_id ic, enum tim_ic_input in)
{
in &= 3;
@@ -989,6 +1786,14 @@ void timer_ic_set_input(u32 timer, enum tim_ic_id ic, enum tim_ic_input in)
}
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Input Polarity
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+@param[in] pol ::tim_ic_pol. Input Capture polarity.
+*/
+
void timer_ic_set_polarity(u32 timer, enum tim_ic_id ic, enum tim_ic_pol pol)
{
if (pol)
@@ -997,28 +1802,70 @@ void timer_ic_set_polarity(u32 timer, enum tim_ic_id ic, enum tim_ic_pol pol)
TIM_CCER(timer) &= ~(0x2 << (ic * 4));
}
+/*---------------------------------------------------------------------------*/
+/** @brief Enable Timer Input Capture
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+*/
+
void timer_ic_enable(u32 timer, enum tim_ic_id ic)
{
TIM_CCER(timer) |= (0x1 << (ic * 4));
}
+/*---------------------------------------------------------------------------*/
+/** @brief Disable Timer Input Capture
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+*/
+
void timer_ic_disable(u32 timer, enum tim_ic_id ic)
{
TIM_CCER(timer) &= ~(0x1 << (ic * 4));
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set External Trigger Filter Parameters for Slave
+
+Set the input filter parameters for the external trigger, specifying:
+@li the frequency of sampling from the Deadtime and Sampling clock
+(@see @ref timer_set_clock_division)
+@li the number of events that must occur before a transition is considered valid.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] flt ::tim_ic_filter. Input Capture Filter identifier.
+*/
+
void timer_slave_set_filter(u32 timer, enum tim_ic_filter flt)
{
TIM_SMCR(timer) &= ~TIM_SMCR_ETF_MASK;
TIM_SMCR(timer) |= flt << 8;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set External Trigger Prescaler for Slave
+
+Set the external trigger frequency division ratio.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] psc ::tim_ic_psc. Input Capture sample clock prescaler.
+*/
+
void timer_slave_set_prescaler(u32 timer, enum tim_ic_psc psc)
{
TIM_SMCR(timer) &= ~TIM_SMCR_ETPS_MASK;
TIM_SMCR(timer) |= psc << 12;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set External Trigger Polarity for Slave
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] pol ::tim_ic_pol. Input Capture polarity.
+*/
+
void timer_slave_set_polarity(u32 timer, enum tim_ic_pol pol)
{
if (pol)
@@ -1027,15 +1874,48 @@ void timer_slave_set_polarity(u32 timer, enum tim_ic_pol pol)
TIM_SMCR(timer) &= ~TIM_SMCR_ETP;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Slave Mode
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] mode Unsigned int8. Slave mode @ref tim_sms
+*/
+
void timer_slave_set_mode(u32 timer, u8 mode)
{
TIM_SMCR(timer) &= ~TIM_SMCR_SMS_MASK;
TIM_SMCR(timer) |= mode;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Set Slave Trigger Source
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] trigger Unsigned int8. Slave trigger source @ref tim_ts
+*/
+
void timer_slave_set_trigger(u32 timer, u8 trigger)
{
TIM_SMCR(timer) &= ~TIM_SMCR_TS_MASK;
TIM_SMCR(timer) |= trigger;
}
+/*---------------------------------------------------------------------------*/
+/** @brief Force Timer Event
+
+A number of events can be forced by software action. All events are cleared by
+hardware on completion.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] event Unsigned int8. Event identifier @ref tim_event_gen.
+More than one event can be forced at the same time by logical OR of the event
+identifiers.
+*/
+
+void timer_force_event(u32 timer, u8 event)
+{
+ TIM_EGR(timer) = event;
+}
+
+/* TODO Timer DMA burst */
+