aboutsummaryrefslogtreecommitdiff
path: root/src/platforms/stlink
AgeCommit message (Collapse)Author
2015-04-03Merge branch 'v1.6-branch'Gareth McMullin
Conflicts: src/Makefile src/platforms/stlink/platform.h src/platforms/swlink/platform.h
2015-04-03Use git describe for version in generated header file.Gareth McMullin
2015-03-22Remove old platform specific error handling macros.Gareth McMullin
2015-03-22Fix errors when building for non-native platforms.Gareth McMullin
2015-03-15Build for stlink with -Os.Gareth McMullin
2015-03-07Quieten build system.Gareth McMullin
2015-03-07Move targets to make bin and hex files to toplevel makefile.Gareth McMullin
2015-03-02Factor out timing routines common to all STM32 targets.Gareth McMullin
2015-03-02Factor out common cdcacm.c from stm32 and tm4c.Gareth McMullin
Cleaned up interface to enter bootloader and read serial number.
2015-03-01Clean up includes everywhere.Gareth McMullin
All source files include general.h first and before anything else. This inlcludes platform.h and platform_support.h No header file needs to include to include any of these, but should include any others needed for it's own declarations.
2015-02-28Move common USB stuff out of platform header files.Gareth McMullin
2015-02-28Factor out common GPIO code in STM32 platforms.Gareth McMullin
2015-02-28Factor Morse code functions out of platform code.Gareth McMullin
2014-10-16Whitespace cleanup.Gareth McMullin
2014-05-28PLATFORM_FATAL_ERRORs are now caught even when they happen in theRichard Eoin Meadows
initial JTAG scan that occours during platform_init. Previously any fatal errors that occoured during this scan caused a hardfault.
2014-05-08Updated libopencm3. Fixes broken bootloader, issue #43.Gareth McMullin
2014-02-13[locm3] Use the new clock-enabling mechanisms in locm3.Frantisek Burian
2014-02-13Fix the STK_CTRL to the STK_CSR library change.Frantisek Burian
2014-01-24Add dfu bootloader update application and use absolute delay for stlinkbon@elektron.ikp.physik.tu-darmstadt.de
Hello, appended 3 patches - adds a dfu-bootloader appliaction - uses absolute delays when waiting for pull-up delays on the STLINK (hopefully fixes issue #30) Updating the dfu-bootloader by additional application is helpfull for the STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be soldered or external SWD is not possible. Use like: - dfu-util -s 0x08002000:leave -D dfu_upgrade.bin - dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin - Push reset buttom and reconnect to enter new dfu bootloader - dfu-util -s 0x08002000:leave -D blackmagic.bin -- Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- >From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001 From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Date: Sun, 20 Oct 2013 15:00:36 +0200 Subject: F1: Prepare to update dfu bootloader via DFU with additional application.
2014-01-04Update to the newest libopencm3Frantisek Burian
2013-12-04Merge remote-tracking branch 'origin/usbuart_highrate'Gareth McMullin
2013-10-22stlink: Give the NRST check more time as otherwise some L1 discovery board ↵Uwe Bonnes
stayed in the bootloader.
2013-10-05FIX: u{8,16,32} -> uint{8,16,32}_t to be compatible with new libraryBuFran
The use of u8, u16, u32 has been deprecated in libopencm3. Update it with standard uint8_t, uint16_t, uint32_t types
2013-08-19Use do {...} while(0) for PLATFORM_FATAL_ERROR() macro.Gareth McMullin
2013-06-17Fix trailing whitespace everywhere.Gareth McMullin
2013-05-14stlink: add support for SRST handlingPaul Fertser
This enables SRST signals in open drain mode for both stlinkv1 and stlinkv2 hardware platforms. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-27Changes to the USBUART to make it less likely to drop characters at higher ↵Allen Ibara
baud rates. USB UART seems to work fine at 115.2Kbps or 230.4Kbps, but starts to drop characters as the data rate goes higher. This commit changes the usbuart ISR to fill a software FIFO, and adds a low priority timer interrupt to run deferred processing to drain a FIFO and send USB CDCACM packets, rather than calling the usb send within the UART ISR. Tested on native platform, up to 1.5MBps.
2013-04-16Allow extra LDFLAGS on command line. Use nano.specs for swlink.Gareth McMullin
2013-04-14Make code compatible with newlib-nano and use it for stlinkPaul Fertser
With gcc-arm-none-eabi-4_7-2013q1-20130313 and -O2 I get text data bss dec hex filename 45744 304 2376 48424 bd28 blackmagic With -Os the results are even more impressive: text data bss dec hex filename 37900 304 2376 40580 9e84 blackmagic Since -Os might lower the debugging speed, do not enable it yet in the absence of real measurements. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14stm32f1/stm32f4: fix hardware CRC calculationPaul Fertser
This was real-life tested on stm32f1 hardware including computation for odd-sized ranges. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-03-12SWLINK: Add variant for the STM8S Discovery boardUwe Bonnes
2013-03-12Split out platform specific bootloader parts to separate files.Gareth McMullin
2013-03-12Further split-up of DFU bootloader.Gareth McMullin
2013-02-15Document changes between ST-Link V1 and V2 and implement needed changesUwe Bonnes
2013-02-11STLINK: Add pointer to Discoveryboard modification instructionsUwe Bonnes
2013-01-25stm32:cdcacm/usbdfu: Print version and build information in the product stringUwe Bonnes
2013-01-21STLINK: Unconditionally enable MCO from 8 MHz HSE to PA8 as on original ↵Uwe Bonnes
firmware. F3 Discovery has has no quarz for the F3 and needs it.
2013-01-21Product and DFU String now tell the hardware they run onUwe Bonnes
2013-01-21stlink: LED is connected to GPIO9. Before LED was associated with the MCO ↵Uwe Bonnes
Output.
2013-01-21usbuart, jtagtap, swdptap: Factor out GPIO setupUwe Bonnes
2013-01-21platforms/stm32: Move more platform dependencies to platform.hUwe Bonnes
2013-01-21Move (now-constant) cdcacm.c to platforms/stm32Uwe Bonnes
2013-01-21cdcacm: move non-constant parts to platform.[hc]Uwe Bonnes
2013-01-21Move usbuart to the stm32 directoryUwe Bonnes
2013-01-21stlink: Add DFU capabilityUwe Bonnes
2013-01-21stlink: Add the UARTUwe Bonnes
2013-01-21stlink: Update to current libopencm3 usb api.Uwe Bonnes
2013-01-21stlink: Use a seperate linker file as stlink has only 64 kByteUwe Bonnes
2012-10-22Build with libopencm3 as a submodule.Gareth McMullin
Fix incompatibilities with latest libopencm3.
2012-07-01Add delay after reset request.Gareth McMullin
Hopefully this fixes problems observed with failing vFlashWrite.