summaryrefslogtreecommitdiffhomepage
path: root/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common
diff options
context:
space:
mode:
Diffstat (limited to 'digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common')
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/gpio.h147
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAdc.h68
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAppClock.h101
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAssert.h108
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAtomic.h57
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halClkCtrl.h70
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDbg.h95
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDiagnostic.h51
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halEeprom.h87
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halFCPU.h36
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInit.h31
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInterrupt.h36
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halIrq.h99
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halPwm.h199
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleep.h73
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleepTimerClock.h146
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSpi.h180
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halUsart.h327
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halW1.h93
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halWdt.h53
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/i2c.h185
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/macros.m90152
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/calibration.c141
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/cstartup.s90250
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAdc.c163
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAppClock.c124
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s79
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s9080
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halClkCtrl.c122
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halEeprom.c66
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halInit.c71
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halIrq.c119
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halPwm.c161
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleep.c297
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleepTimerClock.c304
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSpi.c142
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halUsart.c190
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s210
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s90211
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halWdtInit.c175
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/i2c.c90
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/wdt.c79
42 files changed, 0 insertions, 5468 deletions
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/gpio.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/gpio.h
deleted file mode 100644
index 421cc4d6..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/gpio.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/***************************************************************************//**
- \file gpio.h
-
- \brief Implementation of gpio defines.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 4/12/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _GPIO_H
-#define _GPIO_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-// \cond
-#include <types.h>
-// \endcond
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/******************************************************************************
-* void gpioX_set() sets GPIOX pin to logical 1 level.
-* void gpioX_clr() clears GPIOX pin to logical 0 level.
-* void gpioX_make_in makes GPIOX pin as input.
-* void gpioX_make_in makes GPIOX pin as output.
-* uint8_t gpioX_read() returns logical level GPIOX pin.
-* uint8_t gpioX_state() returns configuration of GPIOX port.
-*******************************************************************************/
-#define HAL_ASSIGN_PIN(name, port, bit) \
-INLINE void GPIO_##name##_set() {PORT##port |= (1 << bit);} \
-INLINE void GPIO_##name##_clr() {PORT##port &= ~(1 << bit);} \
-INLINE uint8_t GPIO_##name##_read() {return (PIN##port & (1 << bit)) != 0;} \
-INLINE uint8_t GPIO_##name##_state() {return (DDR##port & (1 << bit)) != 0;} \
-INLINE void GPIO_##name##_make_out() {DDR##port |= (1 << bit);} \
-INLINE void GPIO_##name##_make_in() {DDR##port &= ~(1 << bit); PORT##port &= ~(1 << bit);} \
-INLINE void GPIO_##name##_make_pullup() {PORT##port |= (1 << bit);}\
-INLINE void GPIO_##name##_toggle() {PORT##port ^= (1 << bit);}
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-// the macros for the manipulation by GPIO0
-HAL_ASSIGN_PIN(0, B, 5);
-// the macros for the manipulation by GPIO1
-HAL_ASSIGN_PIN(1, B, 6);
-// the macros for the manipulation by GPIO2
-HAL_ASSIGN_PIN(2, B, 7);
-// the macros for the manipulation by GPIO3
-HAL_ASSIGN_PIN(3, G, 0);
-// the macros for the manipulation by GPIO4
-HAL_ASSIGN_PIN(4, G, 1);
-// the macros for the manipulation by GPIO5
-HAL_ASSIGN_PIN(5, G, 2);
-// the macros for the manipulation by GPIO6
-HAL_ASSIGN_PIN(6, D, 6);
-// the macros for the manipulation by GPIO7
-HAL_ASSIGN_PIN(7, D, 7);
-// the macros for the manipulation by GPIO8
-HAL_ASSIGN_PIN(8, E, 3);
-
-// macroses only for STK500
-// the macros for the manipulation by GPIO9
-HAL_ASSIGN_PIN(9, C, 0);
-// the macros for the manipulation by GPIO10
-HAL_ASSIGN_PIN(10, C, 1);
-// the macros for the manipulation by GPIO11
-HAL_ASSIGN_PIN(11, C, 2);
-// the macros for the manipulation by GPIO12
-HAL_ASSIGN_PIN(12, C, 3);
-// the macros for the manipulation by GPIO13
-HAL_ASSIGN_PIN(13, C, 4);
-// the macros for the manipulation by GPIO14
-HAL_ASSIGN_PIN(14, C, 5);
-// the macros for the manipulation by GPIO15
-HAL_ASSIGN_PIN(15, C, 6);
-// the macros for the manipulation by GPIO16
-HAL_ASSIGN_PIN(16, C, 7);
-// macroses only for STK500
-
-// macroses only for Rcb
-// the macros for the manipulation by GPIOE2
-HAL_ASSIGN_PIN(E2, E, 2);
-// the macros for the manipulation by GPIOE3
-HAL_ASSIGN_PIN(E3, E, 3);
-// the macros for the manipulation by GPIOE4
-HAL_ASSIGN_PIN(E4, E, 4);
-// the macros for the manipulation by GPIOE5
-HAL_ASSIGN_PIN(E5, E, 5);
-// macroses only for Rcb
-
-// the macros for the manipulation by GPIO_I2C_CLK
-HAL_ASSIGN_PIN(I2C_CLK, D, 0);
-// the macros for the manipulation by GPIO_I2C_DATA
-HAL_ASSIGN_PIN(I2C_DATA, D, 1);
-// the macros for the manipulation by GPIO_USART1_TXD
-HAL_ASSIGN_PIN(USART1_TXD, D, 2);
-// the macros for the manipulation by GPIO_USART1_RXD
-HAL_ASSIGN_PIN(USART1_RXD, D, 3);
-// the macros for the manipulation by GPIO_USART1_EXTCLK
-HAL_ASSIGN_PIN(USART1_EXTCLK, D, 5);
-// the macros for the manipulation by GPIO_USART_RTS
-HAL_ASSIGN_PIN(USART_RTS, D, 4);
-// the macros for the manipulation by GPIO_USART_CTS
-HAL_ASSIGN_PIN(USART_CTS, D, 5);
-// the macros for the manipulation by GPIO_ADC_INPUT_3
-HAL_ASSIGN_PIN(ADC_INPUT_3, F, 3);
-// the macros for the manipulation by GPIO_ADC_INPUT_2
-HAL_ASSIGN_PIN(ADC_INPUT_2, F, 2);
-// the macros for the manipulation by GPIO_ADC_INPUT_1
-HAL_ASSIGN_PIN(ADC_INPUT_1, F, 1);
-// the macros for the manipulation by GPIO_BAT
-HAL_ASSIGN_PIN(BAT, F, 0);
-// the macros for the manipulation by GPIO_1WR
-HAL_ASSIGN_PIN(1WR, G, 5);
-// the macros for the manipulation by GPIO_USART_DTR
-HAL_ASSIGN_PIN(USART_DTR, E, 4);
-// the macros for the manipulation by GPIO_USART0_TXD
-HAL_ASSIGN_PIN(USART0_TXD, E, 0);
-// the macros for the manipulation by GPIO_USART0_RXD
-HAL_ASSIGN_PIN(USART0_RXD, E, 1);
-// the macros for the manipulation by GPIO_USART0_EXTCLK
-HAL_ASSIGN_PIN(USART0_EXTCLK, E, 2);
-// the macros for the manipulation by GPIO_IRQ_7
-HAL_ASSIGN_PIN(IRQ_7, E, 7);
-// the macros for the manipulation by GPIO_IRQ_6
-HAL_ASSIGN_PIN(IRQ_6, E, 6);
-
-#ifdef _HAL_USE_AMPLIFIER_
- // the macros for the manipulation sleep power amplifier
- HAL_ASSIGN_PIN(POW_AMPLF_SLP, C, 1);
-#endif
-
-#endif /* _GPIO_H */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAdc.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAdc.h
deleted file mode 100644
index d64f6bd2..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAdc.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**************************************************************************//**
- \file halAdc.h
-
- \brief Declaration of hardware depended ADC interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALADC_H
-#define _HALADC_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <halTaskManager.h>
-#include <halFCPU.h>
-#include <adc.h>
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Initializations the ADC.
-\param[in]
- param - pointer to parameter structure
-******************************************************************************/
-void halOpenAdc(HAL_AdcParams_t *param);
-
-/**************************************************************************//**
-\brief starts convertion on the ADC channel.
-\param[in]
- channel - channel number.
-******************************************************************************/
-void halStartAdc(uint8_t channel);
-
-/**************************************************************************//**
-\brief Closes the ADC.
-******************************************************************************/
-void halCloseAdc(void);
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/**************************************************************************//**
-\brief SIG_ADC interrupt handler signal implementation
-******************************************************************************/
-INLINE void halSigAdcInterrupt(void)
-{
- halPostTask3(HAL_ADC);
-}
-
-#endif /* _HALADC_H */
-
-// eof halSdc.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAppClock.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAppClock.h
deleted file mode 100644
index 47a90fac..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAppClock.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/**************************************************************************//**
- \file halAppClock.h
-
- \brief Declarations of appTimer hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALAPPCLOCK_H
-#define _HALAPPCLOCK_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halClkCtrl.h>
-#include <halTaskManager.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/** \brief system timer interval in ms */
-#define HAL_APPTIMERINTERVAL 10ul
-/** \brief frequency prescaler for system timer */
-#define TIMER_FREQUENCY_PRESCALER 8
-/** \brief timer counter top value */
-#define TOP_TIMER_COUNTER_VALUE ((F_CPU/1000ul) / TIMER_FREQUENCY_PRESCALER) * HAL_APPTIMERINTERVAL
-/** \brief cpu clk / 8 */
-#define HAL_CLOCK_SELECTION_MASK (1 << CS11)
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Initialization appTimer clock.
-******************************************************************************/
-void halInitAppClock(void);
-
-/**************************************************************************//**
-\brief Synchronization system time which based on application timer.
-******************************************************************************/
-void halAppSystemTimeSynchronize(void);
-
-/**************************************************************************//**
-\brief Return time of sleep timer.
-
-\return
- time in ms.
-******************************************************************************/
-uint32_t halGetTimeOfAppTimer(void);
-
-/**************************************************************************//**
-\brief Return system time in us
-
-\param[out]
- mem - memory for system time
-******************************************************************************/
-void halGetSystemTimeUs(uint64_t *mem);
-
-/**************************************************************************//**
-\brief Takes account of the sleep interval.
-
-\param[in]
- interval - time of sleep
-******************************************************************************/
-void halAdjustSleepInterval(uint32_t interval);
-
-/******************************************************************************
- Inline static functions prototypes section.
-******************************************************************************/
-/**************************************************************************//**
-\brief Enables appTimer clock.
-******************************************************************************/
-INLINE void halStartAppClock(void)
-{
- TCCR4B |= HAL_CLOCK_SELECTION_MASK;
-}
-
-/**************************************************************************//**
-\brief Disables appTimer clock.
-******************************************************************************/
-INLINE void halStopAppClock(void)
-{
- TCCR4B &= ~HAL_CLOCK_SELECTION_MASK; // stop the timer
-}
-
-#endif /*_HALAPPCLOCK_H*/
-
-// eof halAppClock.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAssert.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAssert.h
deleted file mode 100644
index 92e0497f..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAssert.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/**************************************************************************//**
- \file halAssert.h
-
- \brief Implementation of avr assert algorithm.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 18/08/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALASSERT_H
-#define _HALASSERT_H
-
-#ifdef __IAR_SYSTEMS_ICC__
-#ifndef _SYSTEM_BUILD
-#pragma system_include
-#endif
-#endif
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halClkCtrl.h>
-#include <wdtCtrl.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define DELAY_VALUE 0x000000ul
-
-#ifdef _SYS_ASSERT_ON_
-
-#if defined(_HAL_ASSERT_INTERFACE_UART0_)
- #define UBRRNH UBRR0H
- #define UBRRNL UBRR0L
- #define UCSRNA UCSR0A
- #define UCSRNB UCSR0B
- #define UCSRNC UCSR0C
- #define UDRN UDR0
-#elif defined(_HAL_ASSERT_INTERFACE_UART1_)
- #define UBRRNH UBRR1H
- #define UBRRNL UBRR1L
- #define UCSRNA UCSR1A
- #define UCSRNB UCSR1B
- #define UCSRNC UCSR1C
- #define UDRN UDR1
-#else
- #error " Unknown assert interface "
-#endif
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-INLINE void halAssert(uint8_t condition, uint16_t dbgCode)
-{
- if (!condition)
- {
- uint32_t delay;
-
- HAL_StopWdt();
- asm("cli");
- DDRB |= 0xE0;
- /* Init UART */
- UBRRNH = 0;
- if (4000000ul == HAL_ReadFreq())
- UBRRNL = 12;
- else
- UBRRNL = 25;
- UCSRNA = (1 << U2X1);
- UCSRNB = (1 << TXEN1);
- UCSRNC = (3 << UCSZ10);
- while(1)
- {
- PORTB &= ~0xE0;
- /* Send high byte of message to UART */
- while (!(UCSRNA & (1 << UDRE1)));
- UDRN = (dbgCode >> 8);
- /* Send low byte of message to UART */
- while (!(UCSRNA & (1 << UDRE1)));
- UDRN = dbgCode;
- delay = DELAY_VALUE;
- while (delay--);
-
- PORTB |= 0xE0;
- delay = (DELAY_VALUE / 2);
- while(delay--);
- }
- }
-}
-
-#else /* _SYS_ASSERT_ON_ */
- #define halAssert(condition, dbgCode)
-#endif /* _SYS_ASSERT_ON_ */
-
-#endif /* _HALASSERT_H */
-
-// eof halAssert.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAtomic.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAtomic.h
deleted file mode 100644
index 245abf6f..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halAtomic.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/**************************************************************************//**
- \file halAtomic.h
-
- \brief Implementation of atomic sections.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALATOMIC_H
-#define _HALATOMIC_H
-
-#include <types.h>
-
-typedef uint8_t atomic_t;
-
-/******************************************************************************
-Saves global interrupt bit. Disables global interrupt.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-INLINE atomic_t halStartAtomic(void)
-{
- atomic_t result = SREG;
- cli();
- return result;
-}
-
-/******************************************************************************
-Restores global interrupt.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-INLINE void halEndAtomic(atomic_t sreg)
-{
- SREG = sreg;
-}
-
-#endif /* _HALATOMIC_H */
-// eof atomic.h
-
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halClkCtrl.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halClkCtrl.h
deleted file mode 100644
index 6bc7a11d..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halClkCtrl.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/**************************************************************************//**
- \file halClkCtrl.h
-
- \brief Declarations of clock control hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- 16/04/09 A. Khromykh - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALCLKCTRL_H
-#define _HALCLKCTRL_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <halFCPU.h>
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/**************************************************************************//**
-\brief Possible clock source
-******************************************************************************/
-typedef enum
-{
- INTERNAL_RC,
- OTHER_SOURCE
-} ClkSource_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Initialization system clock.
-******************************************************************************/
-void halInitFreq(void);
-
-/**************************************************************************//**
-\brief Return clock source
-
-\return
- clock source.
-******************************************************************************/
-ClkSource_t halGetClockSource(void);
-
-/**************************************************************************//**
-\brief System clock.
-
-\return
- system clock in Hz.
-******************************************************************************/
-uint32_t HAL_ReadFreq(void);
-
-#endif /* _HALCLKCTRL_H */
-
-// eof halClkCtrl.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDbg.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDbg.h
deleted file mode 100644
index def330ba..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDbg.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/***************************************************************************//**
- \file halDbg.h
-
- \brief Declarations of hal , bsb mistake interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 09/11/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALDBG_H
-#define _HALDBG_H
-
-#include <dbg.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-enum
-{
- APPTIMER_MISTAKE = 0x2000,
- INCORRECT_EEPROM_ADDRESS = 0x2001,
- MEMORY_CANNOT_WRITE = 0x2002,
- USARTC_HALUSARTRXBUFFERFILLER_0 = 0x2003,
- USARTC_HALSIGUSARTTRANSMISSIONCOMPLETE_0 = 0x2004,
- USARTC_HALSIGUSARTRECEPTIONCOMPLETE_0 = 0x2005,
- HALUSARTH_HALCLOSEUSART_0 = 0X2006,
- HALUSARTH_HALENABLEUSARTDREMINTERRUPT_0 = 0X2007,
- HALUSARTH_HALDISABLEUSARTDREMINTERRUPT_0 = 0X2008,
- HALUSARTH_HALENABLEUSARTTXCINTERRUPT_0 = 0X2009,
- HALUSARTH_HALDISABLEUSARTTXCINTERRUPT_0 = 0X200A,
- HALUSARTH_HALENABLEUSARTRXCINTERRUPT_0 = 0X200B,
- HALUSARTH_HALDISABLEUSARTRXCINTERRUPT_0 = 0X200C,
- HALUSARTH_HALSENDUSARTBYTE_0 = 0X200D,
- USARTC_HALUSARTSAVEERRORREASON = 0x200E,
- USARTC_HALSIGUSARTERROROCCURED_0 = 0x200F,
- USARTC_HALUNKNOWNERRORREASON_0 = 0x2010,
-
- HAL_USART_TX_EMPTY_LIMIT = 0x2FDB,
- HAL_USART_TRANS_COMPLETE_LIMIT = 0x2FDC,
- HAL_USART_HW_CONTROLLER_LIMIT = 0x2FDD,
- HAL_SLEEP_TIMER_SYNCHRONIZE_LIMIT = 0x2FDE,
- HAL_GET_SLEEP_TIME_LIMIT = 0x2FDF,
- HALISR_EEPROM_WRITE_TIME_LIMIT = 0x2FE0,
- HAL_APP_TIMER_SYNCHRONIZE_LIMIT = 0x2FE1,
- HALISR_INT5_VECT_TIME_LIMIT = 0x2FE2,
- HALISR_ADC_TIME_LIMIT = 0x2FE3,
- HALISR_TIMER4_COMPA_TIME_LIMIT = 0x2FE4,
- HALATOM_SETLOWFUSES_TIME_LIMIT = 0x2FE5,
- HALATOM_INITFREQ_TIME_LIMIT = 0x2FE6,
- HALISR_EEPROM_READY_TIME_LIMIT = 0x2FE7,
- HALISR_INT6_VECT_TIME_LIMIT = 0x2FE8,
- HALISR_INT7_VECT_TIME_LIMIT = 0x2FE9,
- HALISR_TIMER2_COMPA_TIME_LIMIT = 0x2FEA,
- HALISR_TIMER2_OVF_TIME_LIMIT = 0x2FEB,
- HALISR_USART0_UDR_TIME_LIMIT = 0x2FEC,
- HALISR_USART0_TX_TIME_LIMIT = 0x2FED,
- HALISR_USART0_RX_TIME_LIMIT = 0x2FEE,
- HALISR_USART1_UDRE_TIME_LIMIT = 0x2FEF,
- HALISR_USART1_TX_TIME_LIMIT = 0x2FF0,
- HALISR_USART1_RX_TIME_LIMIT = 0x2FF1,
- HALISR_INT4_TIME_LIMIT = 0x2FF2,
- HALISR_TWI_TIME_LIMIT = 0x2FF3,
- HALATOM_STARTWDT_TIME_LIMIT = 0x2FF4,
- HALISR_WDT_TIME_LIMIT = 0x2FF5,
- HALATOM_WRITEBYTE_RFSPI_TIME_LIMIT = 0x2FF6,
- HALISR_TIMER3_COMPA_TIME_LIMIT = 0x2FF7,
- HALISR_PHYDISPATCH_RFINT_TIME_LIMIT = 0x2FF8,
- HALATOM_GETTIME_OF_APPTIMER_1_TIME_LIMIT = 0x2FF9,
- HALATOM_GETTIME_OF_APPTIMER_2_TIME_LIMIT = 0x2FFA,
- HALATOM_GETTIME_OF_APPTIMER_3_TIME_LIMIT = 0x2FFB,
- HALATOM_WRITE_USART_TIME_LIMIT = 0x2FFC,
- HALATOM_READ_USART_TIME_LIMIT = 0x2FFD,
- HALATOM_USART_RX_COMPLETE_TIME_LIMIT = 0x2FFE,
- HALATOM_CLEAR_TIME_CONTROL_TIME_LIMIT = 0x2FFF
-};
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-
-#endif /* _HALDBG_H */
-
-// eof halDbg.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDiagnostic.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDiagnostic.h
deleted file mode 100644
index 53fb0302..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halDiagnostic.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/**************************************************************************//**
- \file halDiagnostic.h
-
- \brief Implementation of diagnostics defines.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 20/05/09 D. Kasyanov - Created
- ******************************************************************************/
-
-#ifndef _HALDIAGNOSTIC_H
-#define _HALDIAGNOSTIC_H
-
-#include <halFCPU.h>
-#include <halDbg.h>
-
-#if defined (MEASURE)
- #define TCNT5_ACCESS_TIME 8
- #define DEFALUT_TIME_LIMIT 100
- #define TIMER3_COMPA_TIME_LIMIT 150
- #define PHYDISPATCH_RFINT_TIME_LIMIT 210
-
- #define BEGIN_MEASURE { \
- uint16_t timeLimit = DEFALUT_TIME_LIMIT; \
- uint16_t start = TCNT5; uint16_t offset;
-
- #define END_MEASURE(code) offset = (TCNT5 - start - TCNT5_ACCESS_TIME) / (F_CPU/1000000ul); \
- if (HALISR_TIMER3_COMPA_TIME_LIMIT == code) timeLimit = TIMER3_COMPA_TIME_LIMIT; \
- if (HALISR_PHYDISPATCH_RFINT_TIME_LIMIT == code) timeLimit = PHYDISPATCH_RFINT_TIME_LIMIT; \
- if (timeLimit != 0) { \
- if (offset > timeLimit) { \
- TCCR5B = 0; TCNT5 = offset; assert(0,code); \
- } \
- } \
- }
-
-#else
- #define BEGIN_MEASURE
- #define END_MEASURE(code)
-#endif
-
-
-#endif /* _HALDIAGNOSTIC_H */
-
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halEeprom.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halEeprom.h
deleted file mode 100644
index 0ca06bfb..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halEeprom.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/**************************************************************************//**
- \file halEeprom.h
-
- \brief Provides interface for the access to hardware dependent
- EEPROM module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALEEPROM_H
-#define _HALEEPROM_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halTaskManager.h>
-#include <eeprom.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/** \brief the mask to rise interrupt when operation on EEPROM was completed */
-#define HAL_EEPROM_WRITE_MASK_INT (1 << EEMPE | 1 << EERIE)
-#define HAL_EEPROM_WRITE_MASK (1 << EEMPE)
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Writes a byte to EEPROM.
-\param[in]
- EECRMask - mask that define capability of interrupt after byte writing.
-\param[in]
- address - address of byte
-\param[in]
- data - data.
-******************************************************************************/
-void halEepromWrite(uint8_t EECRMask, uint16_t address, uint8_t data);
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/**************************************************************************//**
-\brief Waits completion of previous operation.
-******************************************************************************/
-INLINE void halWaitEepromReady(void)
-{
- while (EECR & (1 << EEPE)); // wait for completion of previous write
-}
-
-/**************************************************************************//**
-\brief Reads byte from EEPROM.
-\param[in]
- address -address of byte.
-\return
- a read byte.
-******************************************************************************/
-INLINE uint8_t halReadEeprom(uint16_t address)
-{
- EEAR = address;
- EECR |= (1 << EERE);
- return EEDR;
-}
-
-/**************************************************************************//**
-\brief Posts the task to taskhandler that "EEPROM ready"
- interrupt has occured.
-******************************************************************************/
-INLINE void halSigEepromReadyInterrupt(void)
-{
- halPostTask3(HAL_EE_READY);
-}
-#endif /*_HALEEPROM_H*/
-//eof halEeprom.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halFCPU.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halFCPU.h
deleted file mode 100644
index fe961e60..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halFCPU.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/**************************************************************************//**
- \file halFCPU.h
-
- \brief Declaration F_CPU for C code.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 6/10/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/* Main clock of CPU in Hz. */
-#if defined(HAL_3d6864MHz)
- #define F_CPU 3686400
-#elif defined(HAL_4MHz)
- #define F_CPU 4000000
-#elif defined(HAL_7d3728MHz)
- #define F_CPU 7372800
-#elif defined(HAL_8MHz)
- #define F_CPU 8000000
-#endif
-
-// eof halFCPU.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInit.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInit.h
deleted file mode 100644
index b68aac65..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInit.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**************************************************************************//**
- \file halInit.h
-
- \brief HAL start up module interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALINIT_H
-#define _HALINIT_H
-/******************************************************************************
- Performs start up HAL initialization.
-******************************************************************************/
-void HAL_Init(void);
-
-#endif /* _HALINIT_H */
-
-// eof halInit.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInterrupt.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInterrupt.h
deleted file mode 100644
index 03300064..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halInterrupt.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/**************************************************************************//**
- \file halInterrupt.h
-
- \brief Macroses to manipulate global interrupts.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALINTERRUPT_H
-#define _HALINTERRUPT_H
-
-/******************************************************************************
-Enables global interrupt.
-******************************************************************************/
-#define HAL_EnableInterrupts() sei()
-
-/******************************************************************************
-Disables global interrupt.
-******************************************************************************/
-#define HAL_DisableInterrupts() cli()
-
-#endif /* _HALINTERRUPT_H */
-// eof halInterrupt.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halIrq.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halIrq.h
deleted file mode 100644
index 687447a3..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halIrq.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/***************************************************************************//**
- \file halIrq.h
-
- \brief Declaration of HWD IRQ interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALIRQ_H
-#define _HALIRQ_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <halTaskManager.h>
-#include <irq.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#if defined(PLATFORM_ZIGBIT)
- #define MAX_NUM_LINES 2
- #define MIN_VALID_IRQ_NUMBER IRQ_6
-#else
- #define MAX_NUM_LINES 3
- #define MIN_VALID_IRQ_NUMBER IRQ_5
-#endif
-/** \brief number valid interrupt. */
-#define HAL_NUM_IRQ_LINES MAX_NUM_LINES
-/** \brief first valid interrupt. */
-#define HAL_FIRST_VALID_IRQ MIN_VALID_IRQ_NUMBER
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief user's callback type. */
-typedef void (* IrqCallback_t)(void);
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Sets configuration of pins and the registers.
-\param[in]
- irqNumber - number of interrupt.
-\param[in]
- irqMode - mode of interrupt.
-******************************************************************************/
-void halSetIrqConfig(uint8_t irqNumber, uint8_t irqMode);
-
-/**************************************************************************//**
-\brief Clears configuration of pins and the registers.
-\param[in]
- irqNumber - number of interrupt.
-******************************************************************************/
-void halClrIrqConfig(uint8_t irqNumber);
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/**************************************************************************//**
-\brief Enables external interrupt
-\param[in]
- irqNumber - number of external interrupt.
-******************************************************************************/
-INLINE void halEnableIrqInterrupt(uint8_t irqNumber)
-{
- // Enable external interrupt request
- EIMSK |= (1 << irqNumber);
-}
-
-/**************************************************************************//**
-\brief Disables external interrupt
-\param[in]
- irqNumber - number of external interrupt.
-******************************************************************************/
-INLINE void halDisableIrqInterrupt(uint8_t irqNumber)
-{
- // Disable external interrupt request
- EIMSK &= ~(1 << irqNumber);
-}
-
-#endif /* _HALIRQ_H */
-//eof halirq.h
-
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halPwm.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halPwm.h
deleted file mode 100644
index 6c026ce0..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halPwm.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/**************************************************************************//**
- \file halPwm.h
-
- \brief Declaration of hardware depended PWM interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/11/08 A. Taradov - Created
- 5/04/11 A.Razinkov - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALPWM_H
-#define _HALPWM_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <gpio.h>
-#include <pwm.h>
-
-/******************************************************************************
- Definitions section
-******************************************************************************/
-/* Waveform Generation Mode bits position. PWM module independent. */
-#define WGMn0 0
-#define WGMn1 1
-#define WGMn2 3
-#define WGMn3 4
-
-/* Force Output Compare bits position. PWM module independent. */
-#define FOCnA 7
-#define FOCnB 6
-#define FOCnC 5
-
-/* Clock Select bits position. PWM module independent. */
-#define CSn0 0
-#define CSn1 1
-#define CSn2 2
-
-/* Compare Output Mode bits position. PWM module independent. */
-#define COMnA0 6
-#define COMnA1 7
-#define COMnB0 4
-#define COMnB1 5
-#define COMnC0 2
-#define COMnC1 3
-
-/* PWN unit base channel pins position. PWM module dependent. */
-#define PWM_UNIT_1_BASE_CHANNEL_PIN PB5
-#define PWM_UNIT_3_BASE_CHANNEL_PIN PE3
-
-/* Force Output Compare base bit. PWM module independent. */
-#define FOCNX_BASE_BIT FOCnA
-/* Compare Output Mode base bit number. PWM module independent. */
-#define COMNX0_BASE_BIT COMnA0
-/* Compare Output Mode bitfield size. PWM module and channel independent. */
-#define COMNX_BITFIELD_SIZE 2
-/* Compare Output Mode low bit number. PWM module independent. */
-#define COMnx0(descriptor) ((descriptor)->service.COMnx0)
-/* Compare Output Mode high bit number. PWM module independent. */
-#define COMnx1(descriptor) ((descriptor)->service.COMnx0 + 1)
-/* Output Compare Register. PWM module and channel dependent. */
-#define OCRnx(descriptor) (*((descriptor)->service.OCRnx))
-/* Data Direction Rregister. PWM module dependent. */
-#define DDRn(descriptor) (*((descriptor)->service.DDRn))
-
-/******************************************************************************
- Types section
-******************************************************************************/
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Initializes the PWM.
-
-\param [in] pwmUnit - PWM unit number.
- Equal to ID of Timer/Counter witch serves PWM module.
-******************************************************************************/
-void halOpenPwm(HAL_PwmUnit_t pwmUnit);
-
-/**************************************************************************//**
-\brief Starts PWM on specified channel.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halStartPwm(HAL_PwmDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Stops PWM on specified channel.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halStopPwm(HAL_PwmDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Sets base frequency of module. Common for all module channels.
-
-\param [in] pwmUnit - PWM unit number. Equal to corresponding Timer/Counter ID.
-\param [in] top - value for the TOP register.
-\param [in] prescaler - clock prescaler.
-******************************************************************************/
-void halSetPwmFrequency(HAL_PwmUnit_t pwmUnit, uint16_t top, HAL_PwmPrescaler_t prescaler);
-
-/**************************************************************************//**
-\brief Sets compare value for the PWM channel.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halSetPwmCompareValue(HAL_PwmDescriptor_t *descriptor, uint16_t cmpValue);
-
-/**************************************************************************//**
-\brief Closes the PWM.
-
-\param [in] pwmUnit - PWM unit number.
- Equal to ID of Timer/Counter witch serves PWM module.
-******************************************************************************/
-void halClosePwm(HAL_PwmUnit_t pwmUnit);
-
-/**************************************************************************//**
-\brief Prepare PWM channel access. Determine control registers, ports, pins etc.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halPreparePwmChannelAccess(HAL_PwmDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Configure corresponding pin as PWM out.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-static inline void halMakeOutPwmPin(HAL_PwmDescriptor_t *descriptor)
-{
- DDRn(descriptor) |=
- (1 << (descriptor->service.pwmBaseChannelPin + descriptor->channel));
-}
-
-/**************************************************************************//**
-\brief Configure corresponding PWM output pin as in.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-static inline void halMakeInPwmPin(HAL_PwmDescriptor_t *descriptor)
-{
- DDRn(descriptor) &=
- ~(1 << (descriptor->service.pwmBaseChannelPin + descriptor->channel));
-}
-
-/**************************************************************************//**
-\brief Perform two-step writing to 16-bit registers with special access rule:
- TCNTn, OCRnA/B/C, ICRn.
-
-\param [in] reg - register address.
-\param [in] word - word to move.
-******************************************************************************/
-static inline void halMoveWordToRegister(volatile uint16_t *reg, uint16_t word)
-{
-ATOMIC_SECTION_ENTER
- /* High byte writing */
- *((volatile uint8_t*)(reg) + 1) = (uint8_t)(word >> 8);
- /* Low byte writing */
- *(volatile uint8_t*)(reg) = (uint8_t)(word);
-ATOMIC_SECTION_LEAVE
-}
-
-/**************************************************************************//**
-\brief Perform two-step reading of 16-bit registers with special access rule:
- TCNTn, OCRnA/B/C, ICRn.
-
-\param [in] reg - register address.
-
-\return register value
-******************************************************************************/
-static inline uint16_t halReadWordFromRegister(volatile uint16_t *reg)
-{
- uint16_t word;
-ATOMIC_SECTION_ENTER
- /* Low byte reading */
- word = *(volatile uint8_t*)(reg);
- /* High byte reading */
- word |= ((uint16_t)(*((volatile uint8_t*)(reg) + 1)) << 8);
-ATOMIC_SECTION_LEAVE
- return word;
-}
-
-#endif /* _HALPWM_H */
-
-// eof halPwm.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleep.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleep.h
deleted file mode 100644
index c82c1a09..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleep.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/**************************************************************************//**
- \file halSleep.h
-
- \brief Interface to control sleep mode.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 1/12/09 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALSLEEP_H
-#define _HALSLEEP_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <sleep.h>
-#include <sleepTimer.h>
-
-/******************************************************************************
- Defines section
-******************************************************************************/
-#define HAL_ACTIVE_MODE 0
-#define HAL_SLEEP_MODE 1
-#define HAL_SLEEP_TIMER_IS_STOPPED 0
-#define HAL_SLEEP_TIMER_IS_STARTED 1
-#define HAL_SLEEP_TIMER_IS_WAKEUP_SOURCE 0
-#define HAL_EXT_IRQ_IS_WAKEUP_SOURCE 1
-
-/******************************************************************************
- Types section
-******************************************************************************/
-typedef struct
-{
- HAL_WakeUpCallback_t callback;
- HAL_SleepTimer_t sleepTimer;
- uint8_t wakeupStation : 1;
- uint8_t wakeupSource : 1;
- uint8_t sleepTimerState : 1;
-} HalSleepControl_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Switch on system power.
-
-\param[in]
- wakeupSource - wake up source
-******************************************************************************/
-void halPowerOn(const uint8_t wakeupSource);
-
-/*******************************************************************************
- Shutdown system.
- NOTES:
- the application should be sure the poweroff will not be
- interrupted after the execution of the sleep().
-*******************************************************************************/
-void halPowerOff(void);
-
-#endif /* _HALSLEEP_H */
-// eof halSleep.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleepTimerClock.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleepTimerClock.h
deleted file mode 100644
index 36ab9849..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSleepTimerClock.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/**************************************************************************//**
- \file halSleepTimerClock.h
-
- \brief Definition for count out requested sleep interval.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- 7/04/09 A. Khromykh - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALSLEEPTIMERCLOCK_H
-#define _HALSLEEPTIMERCLOCK_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <halTaskManager.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define SLEEPTIMER_CLOCK 32768lu
-
-#if defined(SLEEP_PRESCALER_1)
- #define SLEEPTIMER_DIVIDER 1ul
- #define SLEEPTIMER_PRESCALER (1u << CS20) // No prescaling
-#elif defined(SLEEP_PRESCALER_8)
- #define SLEEPTIMER_DIVIDER 8ul
- #define SLEEPTIMER_PRESCALER (1u << CS21) // clk/8
-#elif defined(SLEEP_PRESCALER_32)
- #define SLEEPTIMER_DIVIDER 32ul
- #define SLEEPTIMER_PRESCALER ((1u << CS20) | (1u << CS21)) // clk/32
-#elif defined(SLEEP_PRESCALER_64)
- #define SLEEPTIMER_DIVIDER 64ul
- #define SLEEPTIMER_PRESCALER (1u << CS22) // clk/64
-#elif defined(SLEEP_PRESCALER_128)
- #define SLEEPTIMER_DIVIDER 128ul
- #define SLEEPTIMER_PRESCALER ((1u << CS20) | (1u << CS22)) // clk/128
-#elif defined(SLEEP_PRESCALER_256)
- #define SLEEPTIMER_DIVIDER 256ul
- #define SLEEPTIMER_PRESCALER ((1u << CS21) | (1u << CS22)) // clk/256
-#elif defined(SLEEP_PRESCALER_1024)
- #define SLEEPTIMER_DIVIDER 1024ul
- #define SLEEPTIMER_PRESCALER ((1u << CS20) | (1u << CS21) | (1u << CS22)) // clk/1024
-#endif
-
-#define HAL_ASSR_FLAGS ((1 << TCN2UB) | (1 << OCR2AUB) | (1 << OCR2BUB) | (1 << TCR2AUB) | (1 << TCR2BUB))
-// to write some value for correct work of the asynchronous timer
-#define SOME_VALUE_FOR_SYNCHRONIZATION 0x44
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/******************************************************************************
-Starts the sleep timer clock.
-******************************************************************************/
-void halStartSleepTimerClock(void);
-
-/******************************************************************************
-Stops the sleep timer clock.
-******************************************************************************/
-void halStopSleepTimerClock(void);
-
-/******************************************************************************
-Sets interval.
-Parameters:
- value - contains number of ticks which the timer must count out.
-Returns:
- none.
-******************************************************************************/
-void halSetSleepTimerInterval(uint32_t value);
-
-/******************************************************************************
-Returns the sleep timer frequency in Hz.
-Parameters:
- none.
-Returns:
- the sleep timer frequency in Hz.
-******************************************************************************/
-uint32_t halSleepTimerFrequency(void);
-
-/**************************************************************************//**
-\brief Clear timer control structure
-******************************************************************************/
-void halClearTimeControl(void);
-
-/**************************************************************************//**
-\brief Wake up procedure for all external interrupts
-******************************************************************************/
-void halWakeupFromIrq(void);
-
-/**************************************************************************//**
-\brief Get time of sleep timer.
-
-\return
- time in ms.
-******************************************************************************/
-uint32_t halGetTimeOfSleepTimer(void);
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/******************************************************************************
-Disables the sleep timer interrupt.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-INLINE void halDisableSleepTimerInt(void)
-{
- // Disables 8-bit Timer/Counter2 compare channel A and overflow interrupt
- TIMSK2 &= (~(1 << OCIE2A) & ~(1 << TOIE2));
-}
-
-/******************************************************************************
- Interrupt handler signal implementation
-******************************************************************************/
-INLINE void halInterruptSleepClock(void)
-{
- halPostTask0(HAL_ASYNC_TIMER);
-}
-
-/******************************************************************************
- Interrupt handler signal implementation
-******************************************************************************/
-INLINE void halSynchronizeSleepTime(void)
-{
- halPostTask0(HAL_SYNC_SLEEP_TIME);
-}
-
-#endif /* _HALSLEEPTIMERCLOCK_H */
-// eof halSleepTimerClock.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSpi.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSpi.h
deleted file mode 100644
index 59ab72c8..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halSpi.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*****************************************************************************//**
-\file halSpi.h
-
-\brief Declarations of USART SPI mode.
-
-\author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
-\internal
- History:
- 29/06/07 E. Ivanov - Created
-**********************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-#ifndef _HALSPI_H
-#define _HALSPI_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <usart.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define SPI_CHANNEL_0 USART_CHANNEL_0 // USART0 AtMega1281/2561 start addresss
-#define SPI_CHANNEL_1 USART_CHANNEL_1 // USART1 AtMega1281/2561 start addresss
-
-/******************************************************************************
- Types section
-******************************************************************************/
-// spi channel
-typedef UsartChannel_t SpiChannel_t;
-
-// types of the clock mode
-typedef enum
-{
- // leading edge sample RX bit (rising), trailing edge setup TX bit (falling).
- SPI_CLOCK_MODE0,
- // leading edge setup TX bit (rising), trailing edge sample RX bit (falling).
- SPI_CLOCK_MODE1,
- // leading edge sample RX bit (falling), trailing edge setup TX bit (rising).
- SPI_CLOCK_MODE2,
- // leading edge setup TX bit (falling), trailing edge sample RX bit (rising).
- SPI_CLOCK_MODE3
-} SpiClockMode_t;
-
-// clock rate
-typedef enum
-{
- SPI_CLOCK_RATE_62 = ((F_CPU / (2 * 62500ul)) - 1),
- SPI_CLOCK_RATE_125 = ((F_CPU / (2 * 125000ul)) - 1),
- SPI_CLOCK_RATE_250 = ((F_CPU / (2 * 250000ul)) - 1),
- SPI_CLOCK_RATE_500 = ((F_CPU / (2 * 500000ul)) - 1),
- SPI_CLOCK_RATE_1000 = ((F_CPU / (2 * 1000000ul)) - 1),
- SPI_CLOCK_RATE_2000 = ((F_CPU / (2 * 2000000ul)) - 1)
-} SpiBaudRate_t;
-
-// Data order
-typedef enum
-{
- SPI_DATA_MSB_FIRST, // data with MSB first
- SPI_DATA_LSB_FIRST // data with LSB first
-} SpiDataOrder_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/******************************************************************************
-Disables USART channel.
-Parameters:
- tty - spi channel.
-******************************************************************************/
-void halClearUsartSpi(SpiChannel_t tty);
-
-/******************************************************************************
-Write a length bytes to the SPI.
-Parameters:
- tty - spi channel
- buffer - pointer to application data buffer;
- length - number bytes for transfer;
-Returns:
- number of written bytes
-******************************************************************************/
-uint16_t halSyncUsartSpiWriteData(SpiChannel_t tty, uint8_t *buffer, uint16_t length);
-
-/******************************************************************************
-Write & read a length bytes to & from the SPI.
-Parameters:
- tty - spi channel
- buffer - pointer to application data buffer;
- length - number bytes for transfer;
-Returns:
- number of written & read bytes
-******************************************************************************/
-uint16_t halSyncUsartSpiReadData(SpiChannel_t tty, uint8_t *buffer, uint16_t length);
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/******************************************************************************
-Enables data register empty interrupt.
-Parameters:
- tty - spi channel.
-Returns:
- none.
-******************************************************************************/
-INLINE void halEnableUsartSpiDremInterrupt(SpiChannel_t tty)
-{
- UCSRnB(tty) |= (1 << UDRIE0);
-}
-
-/******************************************************************************
-Disables data register empty interrupt.
-Parameters:
- tty - spi channel.
-Returns:
- none.
-******************************************************************************/
-INLINE void halDisableUsartSpiDremInterrupt(SpiChannel_t tty)
-{
- UCSRnB(tty) &= ~(1 << UDRIE0);
-}
-
-/******************************************************************************
-Enables transmit complete interrupt.
-Parameters:
- tty - spi channel.
-Returns:
- none.
-******************************************************************************/
-INLINE void halEnableUsartSpiTxcInterrupt(SpiChannel_t tty)
-{
- UCSRnB(tty) |= (1 << TXCIE0);
-}
-
-/******************************************************************************
-Disables transmit complete interrupt.
-Parameters:
- tty - spi channel.
-Returns:
- none.
-******************************************************************************/
-INLINE void halDisableUsartSpiTxcInterrupt(SpiChannel_t tty)
-{
- UCSRnB(tty) &= ~(1 << TXCIE0);
-}
-
-/*****************************************************************************
-Enables receive complete interrupt.
-Parameters:
- tty - spi channel.
-Returns:
- none.
-******************************************************************************/
-INLINE void halEnableUsartSpiRxcInterrupt(SpiChannel_t tty)
-{
- UCSRnB(tty) |= (1 << RXCIE0);
-}
-
-/*****************************************************************************
-Disables receive complete interrupt.
-Parameters:
- tty - spi channel.
-Returns:
- none.
-******************************************************************************/
-INLINE void halDisableUsartSpiRxcInterrupt(SpiChannel_t tty)
-{
- UCSRnB(tty) &= ~(1 << RXCIE0);
-}
-#endif
-//eof halSpi.h
-
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halUsart.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halUsart.h
deleted file mode 100644
index ccdd5e8f..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halUsart.h
+++ /dev/null
@@ -1,327 +0,0 @@
-/*****************************************************************************//**
-\file halUsart.h
-
-\brief Declarations of usart hardware-dependent module.
-
-\author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
-\internal
- History:
- 29/05/07 E. Ivanov - Created
-**********************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HAL_USART_H
-#define _HAL_USART_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halDbg.h>
-#include <halClkCtrl.h>
-#include <halTaskManager.h>
-#include <gpio.h>
-#include <mnUtils.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/* if USART_DOUBLE_SPEED is 1 the USART uses U2Xn bit (Double speed the usart transmition).
- if USART_DOUBLE_SPEED is 0 then U2Xn bit is not been used.
- */
-#ifndef USART_DOUBLE_SPEED
- #define USART_DOUBLE_SPEED 1ul
-#endif
-
-#define USART_CHANNEL_0 0xC0 // USART0 AtMega1281/2561 start address
-#define USART_CHANNEL_1 0xC8 // USART1 AtMega1281/2561 start address
-
-#if NUM_USART_CHANNELS == 2
- #define HAL_GET_INDEX_BY_CHANNEL(channel) ((channel - USART_CHANNEL_0) >> 3)
-#else
- #define HAL_GET_INDEX_BY_CHANNEL(channel) (channel - channel)
-#endif
-
-#define UCSRnA(tty) MMIO_BYTE(tty + 0)
-#define UCSRnB(tty) MMIO_BYTE(tty + 1)
-#define UCSRnC(tty) MMIO_BYTE(tty + 2)
-#define UBRRnL(tty) MMIO_BYTE(tty + 4)
-#define UBRRnH(tty) MMIO_BYTE(tty + 5)
-#define UBRRn(tty) MMIO_WORD(tty + 4)
-#define UDRn(tty) MMIO_BYTE(tty + 6)
-
-/******************************************************************************
- Types section
-******************************************************************************/
-// usart channel
-typedef uint8_t UsartChannel_t;
-
-// clock rate of usart
-typedef enum
-{
- USART_BAUDRATE_1200 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 1200ul) - 1ul), // 1200 baud rate
- USART_BAUDRATE_2400 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 2400ul) - 1ul), // 2400 baud rate
- USART_BAUDRATE_4800 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 4800ul) - 1ul), // 4800 baud rate
- USART_BAUDRATE_9600 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 9600ul) - 1ul), // 9600 baud rate
- USART_BAUDRATE_19200 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 19200ul) - 1ul), // 19200 baud rate
- USART_BAUDRATE_38400 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 38400ul) - 1ul), // 38400 baud rate
- USART_BAUDRATE_115200 = (unsigned)((F_CPU * (USART_DOUBLE_SPEED + 1ul)) / (16ul * 115200ul)), // 115200 baud rate
- USART_SYNC_BAUDRATE_1200 = (uint16_t)((F_CPU / (2ul * 1200ul)) - 1ul),
- USART_SYNC_BAUDRATE_2400 = (uint16_t)((F_CPU / (2ul * 2400ul)) - 1ul),
- USART_SYNC_BAUDRATE_4800 = (uint16_t)((F_CPU / (2ul * 4800ul)) - 1ul),
- USART_SYNC_BAUDRATE_9600 = (uint16_t)((F_CPU / (2ul * 9600ul)) - 1ul),
- USART_SYNC_BAUDRATE_38400 = (uint16_t)((F_CPU / (2ul * 38400ul)) - 1ul),
- USART_SYNC_BAUDRATE_57600 = (uint16_t)((F_CPU / (2ul * 57600ul)) - 1ul),
- USART_SYNC_BAUDRATE_115200 = (uint16_t)((F_CPU / (2ul * 115200ul)) - 1ul)
-} UsartBaudRate_t;
-
-// usart data length
-typedef enum
-{
- USART_DATA5 = (0 << UCSZ12) | (0 << UCSZ11) | (0 << UCSZ10), // 5 bits data length
- USART_DATA6 = (0 << UCSZ12) | (0 << UCSZ11) | (1 << UCSZ10), // 6 bits data length
- USART_DATA7 = (0 << UCSZ12) | (1 << UCSZ11) | (0 << UCSZ10), // 7 bits data length
- USART_DATA8 = (0 << UCSZ12) | (1 << UCSZ11) | (1 << UCSZ10), // 8 bits data length
-} UsartData_t;
-
-// parity mode
-typedef enum
-{
- USART_PARITY_NONE = (0 << UPM11) | (0 << UPM10), // Non parity mode
- USART_PARITY_EVEN = (1 << UPM11) | (0 << UPM10), // Even parity mode
- USART_PARITY_ODD = (1 << UPM11) | (1 << UPM10) // Odd parity mode
-} UsartParity_t;
-
-// number of stop bits
-typedef enum
-{
- USART_STOPBIT_1 = (0 << USBS1), // 1 stop bits mode
- USART_STOPBIT_2 = (1 << USBS1) // 2 stop bits mode
-} UsartStopBits_t;
-
-// USART task IDs.
-typedef enum
-{
- #if defined(HAL_USE_USART_CHANNEL_0)
- HAL_USART_TASK_USART0_DRE,
- HAL_USART_TASK_USART0_TXC,
- HAL_USART_TASK_USART0_RXC,
- #if defined(_USE_USART_ERROR_EVENT_)
- HAL_USART_TASK_USART0_ERR,
- #endif
- #endif
-
- #if defined(HAL_USE_USART_CHANNEL_1)
- HAL_USART_TASK_USART1_DRE,
- HAL_USART_TASK_USART1_TXC,
- HAL_USART_TASK_USART1_RXC,
- #if defined(_USE_USART_ERROR_EVENT_)
- HAL_USART_TASK_USART1_ERR,
- #endif
- #endif
-
- HAL_USART_TASKS_NUMBER
-} HalUsartTaskId_t;
-
-// Defines edge of clock to sample data.
-/*
-------------------------------------------------------------------------------------
-| | Transmitted Data Changed (Output | Received Data Sampled (Input on |
-| | of TxDn Pin) | RxDn Pin) |
-|------------|-----------------------------------|----------------------------------
-|FALLING_EDGE| Rising XCKn Edge | Falling XCKn Edge |
-|RISING_EDGE | Falling XCKn Edge | Rising XCKn Edge |
-------------------------------------------------------------------------------------
-*/
-typedef enum
-{
- USART_EDGE_MODE_FALLING = 0,
- USART_EDGE_MODE_RISING = 1
-} UsartEdgeMode_t;
-
-// USART synchronization mode.
-typedef enum
-{
- USART_MODE_ASYNC = ((0 << UMSEL01) | (0 << UMSEL00)),
- USART_MODE_SYNC = ((0 << UMSEL01) | (1 << UMSEL00))
-} UsartMode_t;
-
-// clck is output in master mode else input
-typedef enum
-{
- USART_CLK_MODE_MASTER = 0,
- USART_CLK_MODE_SLAVE = 1
-} UsartClkMode_t;
-
-#if defined(_USE_USART_ERROR_EVENT_)
- // usart receiver error reason
- typedef enum
- {
- FRAME_ERROR,
- DATA_OVERRUN,
- PARITY_ERROR
- } UsartErrorReason_t;
-#endif
-
-// usart control
-typedef struct
-{
- volatile uint16_t txPointOfRead;
- volatile uint16_t txPointOfWrite;
- volatile uint16_t rxPointOfRead;
- volatile uint16_t rxPointOfWrite;
- volatile uint16_t rxBytesInBuffer;
- uint8_t usartShiftRegisterEmpty;
-#if defined(_USE_USART_ERROR_EVENT_)
- uint8_t errorReason;
-#endif
-} HalUsartService_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Puts the byte received to the cyclic buffer.
-
-\param[in]
- tty - channel number.
-\param[in]
- data - data to put.
-******************************************************************************/
-void halUsartRxBufferFiller(UsartChannel_t tty, uint8_t data);
-
-/**************************************************************************//**
-\brief Checks the channel number.
-
-\param[in]
- channel - channel to be verified.
-
-\return
- true if channel is possible, \n
- false otherwise.
-******************************************************************************/
-bool halIsUsartChannelCorrect(UsartChannel_t channel);
-
-#if defined(_USE_USART_ERROR_EVENT_)
-/**************************************************************************//**
-\brief Save status register for analyzing of the error reason.
-
-\param[in]
- tty - channel number.
-\param[in]
- status - usart status register.
-******************************************************************************/
-void halUsartSaveErrorReason(UsartChannel_t tty, uint8_t status);
-#endif
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/**************************************************************************//**
- \brief Disables USART channel
-
- \param tty - number of USART channel.
- \return none.
-******************************************************************************/
-INLINE void halCloseUsart(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALCLOSEUSART_0);
- UCSRnB(tty) = 0x00;
-}
-
-/**************************************************************************//**
- \brief Enables data register empty interrupt
-
- \param tty - number of USART channel.
- \return none.
-******************************************************************************/
-INLINE void halEnableUsartDremInterrupt(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALENABLEUSARTDREMINTERRUPT_0);
- UCSRnB(tty) |= (1 << UDRIE1);
-}
-
-/**************************************************************************//**
- \brief Disables data register empty interrupt
-
- \param tty - number of USART channel.
- \return none.
-******************************************************************************/
-INLINE void halDisableUsartDremInterrupt(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALDISABLEUSARTDREMINTERRUPT_0);
- UCSRnB(tty) &= ~(1 << UDRIE1);
-}
-
-/**************************************************************************//**
- \brief Enables transmit complete interrupt
-
- \param tty - number of USART channel.
- \return none.
-******************************************************************************/
-INLINE void halEnableUsartTxcInterrupt(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALENABLEUSARTTXCINTERRUPT_0);
- UCSRnB(tty) |= (1 << TXCIE1);
-}
-
-/**************************************************************************//**
- \brief Disables transmit complete interrupt
-
- \param tty - number of USART channel.
- return none.
-******************************************************************************/
-INLINE void halDisableUsartTxcInterrupt(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALDISABLEUSARTTXCINTERRUPT_0);
- UCSRnB(tty) &= ~(1 << TXCIE1);
-}
-
-/**************************************************************************//**
- \brief Enables receive complete interrupt
-
- \param tty - number of USART channel.
- \return none.
-******************************************************************************/
-INLINE void halEnableUsartRxcInterrupt(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALENABLEUSARTRXCINTERRUPT_0);
- UCSRnB(tty) |= (1 << RXCIE0);
-}
-
-/**************************************************************************//**
- \brief Disables receive complete interrupt
-
- \param tty - number of USART channel.
- \return none.
-******************************************************************************/
-INLINE void halDisableUsartRxcInterrupt(UsartChannel_t tty)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALDISABLEUSARTRXCINTERRUPT_0);
- UCSRnB(tty) &= ~(1 << RXCIE0);
-}
-
-/**************************************************************************//**
- \brief Puts byte to data register of USART
-
- \param tty - number of USART channel.
- data - byte to send.
- \return none.
-******************************************************************************/
-INLINE void halSendUsartByte(UsartChannel_t tty, uint8_t data)
-{
- assert((USART_CHANNEL_0 == tty) || (USART_CHANNEL_1 == tty), HALUSARTH_HALSENDUSARTBYTE_0);
- UCSRnA(tty) |= (1 << TXC1); // clear transmite complete flag
- UDRn(tty) = data;
-}
-
-#endif /* _HAL_USART_H */
-//eof halUsart.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halW1.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halW1.h
deleted file mode 100644
index 46c66fd7..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halW1.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/***************************************************************************//**
- \file halW1.h
-
- \brief Declarations of 1-wire hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALW1_H
-#define _HALW1_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <inttypes.h>
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief i2c 1-wire status */
-typedef enum
-{
- /** \brief There is no device on the bus */
- W1_NO_DEVICE_STATUS,
- /** \brief At least one device is on the bus */
- W1_SUCCESS_STATUS,
- /** \brief Invalid CRC was read during the device search operation */
- W1_INVALID_CRC
-} W1Status_t;
-
-/***************************************************************************//**
-\brief Reads byte from the bus.
-
-\return
- byte read from the bus.
-*******************************************************************************/
-uint8_t halReadW1(void);
-
-/***************************************************************************//**
-\brief Reads bit from the bus.
-
-\return
- Read bit is placed to position of last significant bit.
-*******************************************************************************/
-uint8_t halReadW1Bit(void);
-
-/***************************************************************************//**
-\brief Writes bit to the bus.
-
-\param[in]
- value - to write. The bit is placed to position of last significant bit.
-*******************************************************************************/
-void halWriteW1bit(uint8_t value);
-
-/***************************************************************************//**
-\brief Writes byte to the bus
-
-\param[in]
- value - byte to write.
-*******************************************************************************/
-void halWriteW1(uint8_t value);
-
-/***************************************************************************//**
-\brief Resets all devices connected to the bus.
-
-\return
- 0 - there are some devices at the bus. \n
- 1 - there are not any devices at the bus.
-*******************************************************************************/
-uint8_t halResetW1(void);
-
-/**************************************************************************//**
-\brief Performs delay in microseconds
-
-\param[in]
- delay - number of microseconds to be delay
-******************************************************************************/
-void __delay_us(uint8_t delay);
-
-#endif /* _HALW1_H */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halWdt.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halWdt.h
deleted file mode 100644
index bdf3ee27..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/halWdt.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/**************************************************************************//**
- \file halWdt.h
-
- \brief Declarations of wdt hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 1/10/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALWDT_H
-#define _HALWDT_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halClkCtrl.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#if defined(__ICCAVR__)
-
-/** Enable the watch dog timer with a specific timeout value */
-#define wdt_enable(timeout) do { \
- uint8_t volatile sreg_temp = SREG; \
- cli(); \
- __watchdog_reset(); \
- WDTCSR |= (1 << WDCE) | (1 << WDE); \
- WDTCSR = (1 << WDE) | timeout; \
- SREG = sreg_temp; \
-} while (0)
-
-#define wdt_disable() MCUSR = 0; \
- WDTCSR |= (1 << WDCE) | (1 << WDE); \
- WDTCSR = 0x00;
-
-#endif
-
-#endif /* _HALWDT_H */
-
-//eof halWdt.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/i2c.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/i2c.h
deleted file mode 100644
index 79e6b2e6..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/i2c.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/***************************************************************************//**
- \file i2c.h
-
- \brief Declarations of i2c interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _I2C_H
-#define _I2C_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <i2cPacket.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/** \brief TWI status codes. */
-enum
-{
- TWS_BUSERROR = 0x00,
- TWS_START = 0x08,
- TWS_RSTART = 0x10,
- TWS_MT_SLA_ACK = 0x18,
- TWS_MT_SLA_NACK = 0x20,
- TWS_MT_DATA_ACK = 0x28,
- TWS_MT_DATA_NACK = 0x30,
- TWS_M_ARB_LOST = 0x38,
- TWS_MR_SLA_ACK = 0x40,
- TWS_MR_SLA_NACK = 0x48,
- TWS_MR_DATA_ACK = 0x50,
- TWS_MR_DATA_NACK = 0x58
-};
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Inits TWI module. Setup the speed of TWI.
-\param[in]
- i2cMode - the speed of TWI.
-******************************************************************************/
-void halInitI2c(HAL_i2cMode_t *i2cMode);
-
-/**************************************************************************//**
-\brief Notification about the start condition was sent.
-******************************************************************************/
-void halSendStartDoneI2c(void);
-
-/**************************************************************************//**
-\brief Notification that byte was written to the TWI.
-\param[in]
- result - contains result of previous operation.
-******************************************************************************/
-void halWriteDoneI2c(void);
-
-/**************************************************************************//**
-\brief Notification that byte was read from the TWI.
-\param[in]
- data - contains byte that was read.
-******************************************************************************/
-void halReadDoneI2c(uint8_t data);
-
-/**************************************************************************//**
-\brief Notification that last byte was read from the TWI. Needs send STOP condition
-on bus.
-\param[in]
- data - contains byte that was read.
-******************************************************************************/
-void halReadLastByteDoneI2c(uint8_t data);
-
-/**************************************************************************//**
-\brief Notification that address byte was written to the TWI and was read ACK.
-Starts reading data.
-******************************************************************************/
-void halMasterReadWriteAddressAckI2c(void);
-
-/**************************************************************************//**
-\brief Resets TWI bus and i2c HAL.
-******************************************************************************/
-void halI2cBusReset(void);
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/**************************************************************************//**
-\brief Loop for waiting for end of stop condition on bus.
-******************************************************************************/
-INLINE void halWaitEndOfStopStation(void)
-{
- loop_until_bit_is_clear(TWCR, TWSTO);
-}
-
-/**************************************************************************//**
-\brief Enables interrupt on TWI.
-******************************************************************************/
-INLINE void halInterruptEnableI2c(void)
-{
- TWCR |= (1 << TWIE);
-}
-
-/**************************************************************************//**
-\brief Disables interrupt on TWI.
-******************************************************************************/
-INLINE void halInterruptDisableI2c(void)
-{
- TWCR &= (~(1 << TWIE));
-}
-
-/*************************************************************************//**
-\brief Returns byte that was read from the TWI.
-******************************************************************************/
-INLINE uint8_t halReadByteI2c(void)
-{
- return TWDR;
-}
-
-/*************************************************************************//**
-\brief Resets the TWI.
-******************************************************************************/
-INLINE void halResetI2c(void)
-{
- TWCR = ((1 << TWSTO) | (1 << TWINT)); // Reset TWI
-}
-
-/**************************************************************************//**
-\brief Begins writing an byte to TWI.
-\param[in]
- data - an byte for sending.
-******************************************************************************/
-INLINE void halWriteI2c(uint8_t data)
-{
- TWDR = data;
- TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWIE);
-}
-
-/**************************************************************************//**
-\brief Begins read an byte from TWI.
-\param[in]
- ack - defines the need to send ACK after an byte was recieved.
-******************************************************************************/
-INLINE void halReadI2c(bool ack)
-{
- if (ack)
- TWCR |= (1 << TWEA);
- else
- TWCR &= ~(1 << TWEA);
-
- TWCR |= ((1 << TWINT) | (1 << TWIE) | (1 << TWEN)); // Trigger the TWI
-}
-
-/**************************************************************************//**
-\brief Directs TWI to send stop condition.
-******************************************************************************/
-INLINE void halSendStopI2c(void)
-{
- TWCR = ((1 << TWSTO) | (1 << TWINT) | (1 << TWEN));
-}
-
-/**************************************************************************//**
-\brief Directs the TWI to send start condition.
-******************************************************************************/
-INLINE void halSendStartI2c(void)
-{
- TWCR = ((1 << TWSTA) | (1 <<TWINT) | (1 << TWEN) | (1 << TWIE));
-}
-
-#endif /* _I2C_H*/
-
-// eof i2c.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/macros.m90 b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/macros.m90
deleted file mode 100644
index 57ce6f92..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/include/macros.m90
+++ /dev/null
@@ -1,152 +0,0 @@
-;----------------------------------------------------------------------------
-;
-; MACROS.M90
-;
-; This module contains the A90/AVR C macros
-; used by cstartup.s90 and other assemble source.
-;
-; File version: $Revision: 1.8 $
-;
-;
-;----------------------------------------------------------------------------
-
-#if (((__TID__ >> 8) & 0x7F) != 90)
-#error This file should only be assembled by aa90 or aavr
-#endif
-
-#define A90_PROC_OPTION ((__TID__ >> 4) & 0x0F)
-
-/* Long or relative jumps and calls */
-#if (A90_PROC_OPTION == 0) || (A90_PROC_OPTION == 1)
-#define XCALL RCALL
-#define XJMP RJMP
-#else
-#define XCALL CALL
-#define XJMP JMP
-#endif
-
-/* Length of pointer registers (X/Y/Z) */
-#if (A90_PROC_OPTION == 0) || (A90_PROC_OPTION == 2)
-#define A90_POINTER_REG_SIZE 1
-#define A90_TINY_INDEX
-#else /*!(A90_PROC_OPTION == 0) || (A90_PROC_OPTION == 2)*/
-#if (A90_PROC_OPTION == 1) || (A90_PROC_OPTION == 3) || (A90_PROC_OPTION ==5)
-#define A90_POINTER_REG_SIZE 2
-#else /*!(A90_PROC_OPTION == 1) || (A90_PROC_OPTION == 3) || (A90_PROC_OPTION ==5)*/
-#if (A90_PROC_OPTION == 4) || (A90_PROC_OPTION == 6)
-#define A90_POINTER_REG_SIZE 3
-#define A90_EXTENDED_DATA
-#else /*!(A90_PROC_OPTION == 4) || (A90_PROC_OPTION == 6)*/
-#error Unknown processor option!!
-#endif /*!(A90_PROC_OPTION == 4) || (A90_PROC_OPTION == 6)*/
-#endif /*!(A90_PROC_OPTION == 1) || (A90_PROC_OPTION == 3) || (A90_PROC_OPTION ==5)*/
-#endif /*!(A90_PROC_OPTION == 0) || (A90_PROC_OPTION == 2)*/
-
-#if (A90_PROC_OPTION > 4)
-#define A90_LARGE_CODE
-#endif
-
-#if (A90_PROC_OPTION > 1)
-#define A90_HAS_POSSIBLE_ELPM
-#endif
-
-#ifdef A90_HAS_POSSIBLE_ELPM
-#ifdef __HAS_ELPM__
-#define A90_HAS_ELPM
-#else
-#ifndef SMALL_FLASH
-#define A90_HAS_ELPM
-#endif
-#endif
-#endif
-
-#if A90_PROC_OPTION > 1
-#define A90_24BIT_GENERIC
-#endif
-
-#if A90_PROC_OPTION < 2
-#define A90_16BIT_GENERIC
-#endif
-
-#ifdef __MEMORY_MODEL__
-
-#define TINY_MEMORY_MODEL 0
-#define SMALL_MEMORY_MODEL 1
-#define LARGE_MEMORY_MODEL 2
-
-#if __MEMORY_MODEL__ == 1
-#undef MEMORY_MODEL
-#define MEMORY_MODEL TINY_MEMORY_MODEL
-#endif
-
-#if __MEMORY_MODEL__ == 2
-#undef MEMORY_MODEL
-#define MEMORY_MODEL SMALL_MEMORY_MODEL
-#endif
-
-#if __MEMORY_MODEL__ == 3
-#undef MEMORY_MODEL
-#define MEMORY_MODEL LARGE_MEMORY_MODEL
-#endif
-
-#else
-
-#ifdef MEMORY_MODEL
-#define t 0
-#define s 1
-#define l 2
-
-#define TINY_MEMORY_MODEL 0
-#define SMALL_MEMORY_MODEL 1
-#define LARGE_MEMORY_MODEL 2
-
-#if MEMORY_MODEL == t
-#undef MEMORY_MODEL
-#define MEMORY_MODEL TINY_MEMORY_MODEL
-#endif
-
-#if MEMORY_MODEL == s
-#undef MEMORY_MODEL
-#define MEMORY_MODEL SMALL_MEMORY_MODEL
-#endif
-
-#if MEMORY_MODEL == l
-#undef MEMORY_MODEL
-#define MEMORY_MODEL LARGE_MEMORY_MODEL
-#endif
-
-#undef t
-#undef s
-#undef l
-#endif
-#endif
-
-/* Register nicknames */
-#define T0 R0
-#define T1 R1
-#define T2 R2
-#define T3 R3
-#define P0 R16
-#define P1 R17
-#define P2 R18
-#define P3 R19
-#define Q0 R20
-#define Q1 R21
-#define Q2 R22
-#define Q3 R23
-#define X0 R26
-#define X1 R27
-#define X2 R25
-#define Y0 R28
-#define Y1 R29
-#define Z0 R30
-#define Z1 R31
-#define Z2 R19
-
-/* I/O-Space Register nicknames */
-#define RAMPD 0x38
-#define RAMPX 0x39
-#define RAMPY 0x3A
-#define RAMPZ 0x3B
-#define EIND 0x3C
-#define SREG 0x3F
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/calibration.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/calibration.c
deleted file mode 100644
index 7d59a5e0..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/calibration.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/**************************************************************************//**
- \file calibration.c
-
- \brief the calibration of the internal RC generator.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halClkCtrl.h>
-#include <calibration.h>
-#include <atomic.h>
-#include <halW1.h>
-
-/******************************************************************************
- Defines section
-******************************************************************************/
-#define INTERNAL_CLOCK F_CPU
-
-// low frequency oscillator clock for 1 cycle measurement
-#define EXTERNAL_TICKS 1
-// mcu clocks number of one procedure measurement
-#define CYCLE_LENGTH 7
-// stability crystal oscillator frequency
-#define REFERENCE_CLOCK (32768/1024)
-// Etalon mcu clock number for 1 ticks of 32 Hz asynchronous timer
-#define REFERENCE_COUNT (INTERNAL_CLOCK * EXTERNAL_TICKS) / (REFERENCE_CLOCK * CYCLE_LENGTH)
-// up direction
-#define UP_DIRECT 2
-// down direction
-#define DOWN_DIRECT 1
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/******************************************************************************
-Calculates number of cycles during EXTERNAL_TICKS period.
-Parameters:
- none
-Returns:
- number of the cycles.
-******************************************************************************/
-uint16_t halMeasurement(void);
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Performs calibration of the internal RC generator.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-void halCalibrateInternalRc(void)
-{
- uint16_t count;
- uint8_t cycles = 0x80;
- uint16_t counterGate = REFERENCE_COUNT;
- uint8_t direct = 0;
-
- do
- {
- // perform clock measurement
- count = halMeasurement();
- if (count > REFERENCE_COUNT)
- {
- if ((counterGate < (count - REFERENCE_COUNT)) && (UP_DIRECT == direct))
- { // previous measurement was more correct
- OSCCAL--;
- NOP;
- break;
- }
- OSCCAL--;
- NOP;
- counterGate = count - REFERENCE_COUNT;
- direct = DOWN_DIRECT;
- }
-
- if (count < REFERENCE_COUNT)
- {
- if ((counterGate < (REFERENCE_COUNT - count)) && (DOWN_DIRECT == direct))
- { // previous measurement was more exactly
- OSCCAL++;
- NOP;
- break;
- }
- OSCCAL++;
- NOP;
- counterGate = REFERENCE_COUNT - count;
- direct = UP_DIRECT;
- }
-
- if (REFERENCE_COUNT == count)
- break;
-
- } while (--cycles);
-}
-
-/******************************************************************************
-Performs calibration of the main clock generator.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-void HAL_CalibrateMainClock(void)
-{
- if (INTERNAL_RC == halGetClockSource())
- halCalibrateInternalRc();
-}
-
-/******************************************************************************
-Starts calibration after program starting or waking up from power down.
-******************************************************************************/
-void halStartingCalibrate(void)
-{
- uint16_t i;
-
- for (i = 0; i < 5000; i++)
- { /* wait for 1 second start up low frequency generator*/
- __delay_us(200); // 200 us
- }
- HAL_CalibrateMainClock();
-}
-// eof calibration.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/cstartup.s90 b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/cstartup.s90
deleted file mode 100644
index ce20e615..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/cstartup.s90
+++ /dev/null
@@ -1,250 +0,0 @@
-;----------------------------------------------------------------------------
-;
-; This module contains the AVR C and EC++ startup
-; routine and must usually be tailored to suit
-; customer's hardware.
-;
-; File version: $Revision: 1.13 $
-;
-;----------------------------------------------------------------------------
-#include <macros.m90>
-
-;----------------------------------------------------------------------------
-; Set up the INTVEC segment with a reset vector
-;----------------------------------------------------------------------------
- MODULE ?RESET
-
- COMMON INTVEC:CODE:ROOT(1) ; Align at an even address
-
- EXTERN ?BC_STARTUP
- PUBLIC __bitcloud_start
- PUBLIC ?RESET
-
- ORG $0
-__bitcloud_start:
-?RESET:
- XJMP ?BC_STARTUP
-
- ENDMOD
-
-;----------------------------------------------------------------------------
-; Forward declarations of segments used in initialization
-;----------------------------------------------------------------------------
- RSEG CSTACK:DATA:NOROOT(0)
- RSEG RSTACK:DATA:NOROOT(0)
-
-;----------------------------------------------------------------------------
-; Perform C initialization
-;----------------------------------------------------------------------------
- MODULE ?BC_STARTUP
-
- EXTERN __low_level_init
- EXTERN __segment_init
-#ifdef _ECLIB_ECPP
- EXTERN __call_ctors
-#endif /* _ECLIB_ECPP */
- EXTERN main
- EXTERN exit
- EXTERN _exit
- ; jump NULL handler
- EXTERN halWdtInit
-
-;----------------------------------------------------------------------------
-; If the return address stack is located in external SRAM, make sure that
-; you have uncommented the correct code in __low_level_init!!!
-;----------------------------------------------------------------------------
- RSEG CODE:CODE:NOROOT(1)
- PUBLIC ?BC_STARTUP
- PUBLIC __RESTART
- EXTERN ?RESET
-
-__RESTART:
-?BC_STARTUP:
- XCALL halWdtInit ; call stop wdt, read reset reason and jump NULL handler
-
-#if A90_POINTER_REG_SIZE > 2
- PUBLIC ?zero_reg_initialization
-
-?zero_reg_initialization:
- CLR R15
- OUT RAMPD,R15
-#endif
-
- REQUIRE ?SETUP_STACK
- REQUIRE ?RESET
-
- RSEG CODE:CODE:NOROOT(1)
- PUBLIC __RSTACK_in_external_ram
-
-__RSTACK_in_external_ram:
- LDI R16,0xC0
- OUT 0x35,R16 ;Enable the external SRAM with a wait state
-
- RSEG CODE:CODE:NOROOT(1)
- PUBLIC __RSTACK_in_external_ram_new_way
- EXTERN __?XMCRA
-
-__RSTACK_in_external_ram_new_way:
- LDI R16,0x8C ;SRE=1,SRL2=0,SRL1=0,SRL0=0,SRW11=1,SRW10=1,SRW01=0,SRW00=0
- STS __?XMCRA,R16 ;Enable the external SRAM with maximum wait state.
-
-;----------------------------------------------------------------------------
-; Set up the CSTACK and RSTACK pointers.
-;----------------------------------------------------------------------------
- RSEG CODE:CODE:NOROOT(1)
- ;; Fill up stacks with repeated pattern 0xCD (same pattern is used by IAR stack gauge)
-?FILL_RSTACK:
- LDI R16, 0xCD
- LDI X0, LOW(SFB(RSTACK))
- LDI Y0, LOW(SFE(RSTACK))
-#if A90_POINTER_REG_SIZE > 1
- LDI X1, HIGH(SFB(RSTACK))
- LDI Y1, HIGH(SFE(RSTACK))
-#else
- LDI X1, 0
- LDI Y1, 0
-#endif
-?FILL_RSTACK_LOOP:
- ST X+, R16
- CP X0, Y0
- CPC X1, Y1
- BRNE ?FILL_RSTACK_LOOP
-
-?FILL_CSTACK:
- LDI X0, LOW(SFB(CSTACK))
- LDI Y0, LOW(SFE(CSTACK))
-#if A90_POINTER_REG_SIZE > 1
- LDI X1, HIGH(SFB(CSTACK))
- LDI Y1, HIGH(SFE(CSTACK))
-#else
- LDI X1, 0
- LDI Y1, 0
-#endif
-?FILL_CSTACK_LOOP:
- ST X+, R16
- CP X0, Y0
- CPC X1, Y1
- BRNE ?FILL_CSTACK_LOOP
-
-?SETUP_STACK:
- ;; Return address stack (RSTACK)
- LDI R16,LOW(SFE(RSTACK)-1)
- OUT 0x3D,R16
-#if A90_POINTER_REG_SIZE > 1
- LDI R16,HIGH(SFE(RSTACK)-1)
- OUT 0x3E,R16
-#endif
-
- ;; Data stack (CSTACK)
- LDI Y0,LOW(SFE(CSTACK))
-#if A90_POINTER_REG_SIZE > 1
-#if MEMORY_MODEL == TINY_MEMORY_MODEL
- LDI Y1,0
-#else
- LDI Y1,HIGH(SFE(CSTACK))
-#endif
-#if A90_POINTER_REG_SIZE > 2
- LDI Z0,HWRD(SFB(CSTACK))
- OUT RAMPY,Z0
-#endif
-#endif
-
-#if A90_POINTER_REG_SIZE > 2
-; Nothing here, the things previously here has been done earlier.
-#else
- REQUIRE ?call_low_level_init
-
-;----------------------------------------------------------------------------
-; Clear R15 so that it can be used as zero register by the code generator.
-; The compiler will emit a "REQUIRE ?zero_reg_initialization" statement if
-; this optimization has been enabled.
-;----------------------------------------------------------------------------
- RSEG CODE:CODE:NOROOT(1)
- PUBLIC ?zero_reg_initialization
-
-?zero_reg_initialization:
- CLR R15
-
-;----------------------------------------------------------------------------
-; Call __low_level_init to do low level initializatons. Modify the supplied
-; __low_level_init module to add your own initialization code or to
-; remove segment initialization (by returning 0).
-;----------------------------------------------------------------------------
- RSEG CODE:CODE:NOROOT(1)
-#endif
- PUBLIC ?call_low_level_init
-
-?call_low_level_init:
- XCALL __low_level_init
-
- REQUIRE ?cstartup_call_main
-
-;----------------------------------------------------------------------------
-; Call __segment_init to initialize segments.
-;----------------------------------------------------------------------------
- RSEG CODE:CODE:NOROOT(1)
- PUBLIC ?need_segment_init
-
-?need_segment_init:
- TST P0
- BREQ ?skip_segment_init
- XCALL __segment_init
-?skip_segment_init:
-
-;----------------------------------------------------------------------------
-; Call the constructors of all global objects. This code will only
-; be used if any EC++ modules defines global objects that need to
-; have its constructor called before main.
-;----------------------------------------------------------------------------
-#ifdef _ECLIB_ECPP
- RSEG DIFUNCT:CODE:NOROOT(0)
- RSEG CODE:CODE:NOROOT(1)
-
- PUBLIC ?call_ctors
-
-?call_ctors:
-#ifdef __HAS_ELPM__
- LDI P0,LOW(SFB(DIFUNCT))
- LDI P1,LOW(SFB(DIFUNCT) >> 8)
- LDI P2,SFB(DIFUNCT) >> 16
-
- LDI Q0,LOW(SFE(DIFUNCT))
- LDI Q1,LOW(SFE(DIFUNCT) >> 8)
- LDI Q2,SFE(DIFUNCT) >> 16
-#else
- LDI P0,LOW(SFB(DIFUNCT))
- LDI P1,SFB(DIFUNCT) >> 8
-
- LDI P2,LOW(SFE(DIFUNCT))
- LDI P3,SFE(DIFUNCT) >> 8
-#endif
-
- XCALL __call_ctors
-#endif /* _ECLIB_ECPP */
-
-;----------------------------------------------------------------------------
-; Call main
-;----------------------------------------------------------------------------
- RSEG CODE:CODE:NOROOT(1)
-
- PUBLIC ?cstartup_call_main
-
-?cstartup_call_main:
- XCALL main
- XCALL exit
- XJMP _exit
-
- END
-
-;----------------------------------------------------------------------------
-; $Log: cstartup.s90 $
-; Revision 1.13 2005/02/09 16:34:50Z IPEO
-; Revision 1.12 2005/02/09 12:12:46Z IPEO
-; Revision 1.11 2005/02/09 11:32:04Z IPEO
-; Revision 1.10 2005/01/26 13:56:34Z IPEO
-; Revision 1.9 2005/01/17 15:24:14Z IPEO
-; Revision 1.8 2003/11/07 16:34:04Z IPEO
-; Revision 1.7 2003/09/04 13:48:25Z IPEO
-; Revision 1.6 2003/08/22 14:09:09Z IPEO
-; Revision 1.5 2003/08/22 08:54:09Z IPEO
-; Revision 1.4 2003/08/20 08:38:55Z IPEO
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAdc.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAdc.c
deleted file mode 100644
index b9e19a0b..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAdc.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/**************************************************************************//**
- \file halAdc.c
-
- \brief Implementation of hardware depended ADC interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halAdc.h>
-#include <halW1.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-
-/******************************************************************************
- Defines section
-******************************************************************************/
-#define ALL_CHANNEL_MASK 0x1F
-#define CHANNEL_MASK_1 0x01
-#define CHANNEL_MASK_2 0x03
-#define CHANNEL_MASK_3 0x04
-#define CHANNEL_MASK_4 0x0C
-#define DELAY_FOR_STABILIZE 125
-
-/******************************************************************************
- Constants section
-******************************************************************************/
-#if F_CPU == 4000000
- PROGMEM_DECLARE(const uint8_t halAdcDivider[5]) = {2, 3, 4, 5, 6};
-#elif F_CPU == 8000000
- PROGMEM_DECLARE(const uint8_t halAdcDivider[5]) = {3, 4, 5, 6, 7};
-#endif
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-static volatile uint8_t halAdcResolution = RESOLUTION_8_BIT;
-static volatile void *halAdcDataPointer = NULL;
-static volatile uint16_t halAdcCurCount = 0;
-static volatile uint16_t halAdcMaxCount = 0;
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Initializations the ADC.
-Parameters:
- param - pointer to parameter structure
-Returns:
- none.
-******************************************************************************/
-void halOpenAdc(HAL_AdcParams_t *param)
-{
- halAdcMaxCount = param->selectionsAmount;
- halAdcResolution = param->resolution;
- halAdcDataPointer = param->bufferPointer;
-
- /* sets voltage reference */
- ADMUX = param->voltageReference;
- /* Enable left adjust result */
- if (RESOLUTION_8_BIT == halAdcResolution)
- ADMUX |= (1 << ADLAR);
-
- uint8_t tmp;
- memcpy_P(&tmp, &(halAdcDivider[param->sampleRate]), 1);
- ADCSRA = tmp | (1 << ADEN);
-}
-
-/******************************************************************************
-Starts convertion on the ADC channel.
-Parameters:
- channel - channel number.
-Returns:
- none.
-******************************************************************************/
-void halStartAdc(uint8_t channel)
-{
- halAdcCurCount = 0;
- /* disable digital buffers */
- if (HAL_ADC_CHANNEL3 >= channel)
- {
- DIDR0 = (1 << channel);
- }
- else
- {
- if ((HAL_ADC_DIFF_CHANNEL0 == channel) || (HAL_ADC_DIFF_CHANNEL2 == channel))
- DIDR0 = CHANNEL_MASK_1;
- else if ((HAL_ADC_DIFF_CHANNEL1 == channel) || (HAL_ADC_DIFF_CHANNEL3 == channel))
- DIDR0 = CHANNEL_MASK_2;
- else if ((HAL_ADC_DIFF_CHANNEL4 == channel) || (HAL_ADC_DIFF_CHANNEL6 == channel))
- DIDR0 = CHANNEL_MASK_3;
- else if ((HAL_ADC_DIFF_CHANNEL5 == channel) || (HAL_ADC_DIFF_CHANNEL7 == channel))
- DIDR0 = CHANNEL_MASK_4;
- }
-
- uint8_t tmp = ADMUX & ALL_CHANNEL_MASK;
-
- /* clear previous channel number */
- ADMUX &= ~ALL_CHANNEL_MASK;
- /* set current channel number */
- ADMUX |= channel;
-
- /* if new differential channel is settled then must make 125 us delay for gain stabilize. */
- if ((tmp != channel) && (HAL_ADC_CHANNEL3 < channel))
- __delay_us(DELAY_FOR_STABILIZE);
-
- if (halAdcMaxCount > 1)
- ADCSRA |= ((1 << ADIE) | (1 << ADATE) | (1 << ADSC)); // Starts running mode
- else
- ADCSRA |= ((1 << ADIE) | (1 << ADSC)); // Starts one conversion
-}
-
-/******************************************************************************
-Closes the ADC.
-Parameters:
- none
-Returns:
- none
-******************************************************************************/
-void halCloseAdc(void)
-{
- ADMUX = 0;
- ADCSRA = 0;
- // Digital input enable
- DIDR0 = 0;
-}
-
-/******************************************************************************
-ADC conversion complete interrupt handler.
-******************************************************************************/
-ISR(ADC_vect)
-{
- BEGIN_MEASURE
- // Read ADC conversion result
- if (RESOLUTION_8_BIT == halAdcResolution)
- ((uint8_t *)halAdcDataPointer)[halAdcCurCount++] = ADCH;
- else
- ((uint16_t *)halAdcDataPointer)[halAdcCurCount++] = ADC;
-
- if (halAdcCurCount == halAdcMaxCount)
- {
- // Disable ADC Interrupt
- ADCSRA &= ~(1 << ADIE);
- halSigAdcInterrupt();
- }
- END_MEASURE(HALISR_ADC_TIME_LIMIT)
-}
-// eof halAdc.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAppClock.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAppClock.c
deleted file mode 100644
index c462b896..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halAppClock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/**************************************************************************//**
- \file halAppClock.c
-
- \brief Implementation of appTimer hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halAppClock.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-static uint32_t halAppTime = 0ul; // time of application timer
-uint8_t halAppTimeOvfw = 0;
-static volatile uint8_t halAppIrqCount = 0;
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Initialization appTimer clock.
-******************************************************************************/
-void halInitAppClock(void)
-{
- OCR4A = TOP_TIMER_COUNTER_VALUE; // 1 millisecond timer interrupt interval.
- TCCR4B = (1 << WGM12); // CTC mode
- halStartAppClock(); // clock source is cpu divided by 8
- TIMSK4 |= (1 << OCIE4A); // Enable TC4 interrupt
-}
-
-/******************************************************************************
-Return time of sleep timer.
-
-Returns:
- time in ms.
-******************************************************************************/
-uint32_t halGetTimeOfAppTimer(void)
-{
- halAppSystemTimeSynchronize();
- return halAppTime;
-}
-
-/******************************************************************************
-Return system time in us
-
-Parameters:
- mem - memory for system time
-Returns:
- none.
-******************************************************************************/
-void halGetSystemTimeUs(uint64_t *mem)
-{
-#if (F_CPU == 4000000ul)
- *mem = 1000ul * halAppTime + (TCNT4 << 1);
-#endif
-#if (F_CPU == 8000000ul)
- *mem = 1000ul * halAppTime + TCNT4;
-#endif
-}
-
-/**************************************************************************//**
-\brief Takes account of the sleep interval.
-
-\param[in]
- interval - time of sleep
-******************************************************************************/
-void halAdjustSleepInterval(uint32_t interval)
-{
- halAppTime += interval;
- halPostTask4(HAL_TIMER4_COMPA);
-}
-
-/**************************************************************************//**
-Synchronization system time which based on application timer.
-******************************************************************************/
-void halAppSystemTimeSynchronize(void)
-{
- uint8_t tmpCounter;
- uint32_t tmpValue;
-
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- tmpCounter = halAppIrqCount;
- halAppIrqCount = 0;
- END_MEASURE(HAL_APP_TIMER_SYNCHRONIZE_LIMIT)
- ATOMIC_SECTION_LEAVE
-
- tmpValue = tmpCounter * HAL_APPTIMERINTERVAL;
- halAppTime += tmpValue;
- if (halAppTime < tmpValue)
- halAppTimeOvfw++;
-}
-
-/******************************************************************************
-Interrupt handler
-******************************************************************************/
-ISR(TIMER4_COMPA_vect)
-{
- BEGIN_MEASURE
- halAppIrqCount++;
- halPostTask4(HAL_TIMER4_COMPA);
- // infinity loop spy
- SYS_InfinityLoopMonitoring();
- END_MEASURE(HALISR_TIMER4_COMPA_TIME_LIMIT)
-}
-// eof halAppClock.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s
deleted file mode 100644
index a6332b7d..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s
+++ /dev/null
@@ -1,79 +0,0 @@
-/**************************************************************************//**
- \file halCalibration.s
-
- \brief Implementation of measurement of mcu clock.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 1/10/08 A. Khromykh - Created
-*******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
-Calculates number of cycles during EXTERNAL_TICKS period.
-Parameters:
- none
-Returns:
- number of the cycles (r25:r24).
-******************************************************************************/
-.global halMeasurement
-.type halMeasurement,@function
-halMeasurement:
- push r21
-
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
-
- ; local copy cnt
- push r28
- push r29
- ldi r28, 0 ; cnt = 0
- ldi r29, 0 ; cnt = 0
-
- ; r21 = TCNT2
- push r23 ; save SREG to stack, to clear r23
- lds r21, 0x00B2
- ; while(TCNT2 == r21);
- __l0:
- lds r23, 0x00B2
- cp r23, r21
- breq __l0
-
- ; r23++
- inc r23
-
- ; measurement
- __l1:
- adiw r28, 0x01 ; cnt ++ (2 cycle)
- lds r21, 0x00B2 ; read TCNT2
- cp r21, r23 ; if (TCNT2 == TCNT2old)
- brne __l1 ;
-
- pop r23 ; load SREG from stack
-
- ; return cnt
- movw r24, r28
-
- pop r29
- pop r28
-
- ; Restore SREG
- out 0x3F, r23
- pop r23
- pop r21
- ret
-
-; eof halCalibration.s
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s90 b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s90
deleted file mode 100644
index cbdb8d13..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halCalibration.s90
+++ /dev/null
@@ -1,80 +0,0 @@
-/**************************************************************************//**
- \file halCalibration.s90
-
- \brief Implementation of measurement of mcu clock.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 1/10/08 A. Khromykh - Created
-*******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/*=============================================================
-Calculates number of cycles during EXTERNAL_TICKS period.
-Parameters:
- none
-Returns:
- number of the cycles (r17:r16).
-===============================================================*/
-PUBLIC halMeasurement
-RSEG CODE
-halMeasurement:
- push r21
-
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
-
- ; local copy cnt
- push r28
- push r29
- ldi r28, 0 ; cnt = 0
- ldi r29, 0 ; cnt = 0
-
- ; r21 = TCNT2
- push r23 ; save SREG to stack, to clear r23
- lds r21, 0x00B2
- ; while(TCNT2 == r21);
- __l0:
- lds r23, 0x00B2
- cp r23, r21
- breq __l0
-
- ; r23++
- inc r23
-
- ; measurement
- __l1:
- adiw r28, 0x01 ; cnt ++ (2 cycle)
- lds r21, 0x00B2 ; read TCNT2
- cp r21, r23 ; if (TCNT2 == TCNT2old)
- brne __l1 ;
-
- pop r23 ; load SREG from stack
-
- ; return cnt
- movw r16, r28
-
- pop r29
- pop r28
-
- ; Restore SREG
- out 0x3F, r23
- pop r23
- pop r21
- ret
-
-; eof halCalibration.s90
-END
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halClkCtrl.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halClkCtrl.c
deleted file mode 100644
index e6f968d1..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halClkCtrl.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/**************************************************************************//**
- \file halClkCtrl.c
-
- \brief Implementation of clock control module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- 16/04/09 A. Khromykh - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halClkCtrl.h>
-#include <halRfCtrl.h>
-#include <atomic.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-// defines fuse mask for RC oscillator
-#define HAL_RC_OSCILLATOR_CLOCK 0x02
-// mask for CKSEL bits
-#define HAL_CKSEL_MASK 0x0F
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-void halStartingCalibrate(void);
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-static volatile ClkSource_t clkClockSource;
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/**************************************************************************//**
-\brief Initialization system clock.
-******************************************************************************/
-void halInitFreq(void)
-{
- uint8_t lowFuseByte;
-
- // wait for end of eeprom writing
- while (EECR & (1 << EEPE));
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- lowFuseByte = SF_GET_LOW_FUSES();
- END_MEASURE(HALATOM_SETLOWFUSES_TIME_LIMIT)
- ATOMIC_SECTION_LEAVE
-
- if (HAL_RC_OSCILLATOR_CLOCK == (lowFuseByte & HAL_CKSEL_MASK))
- clkClockSource = INTERNAL_RC;
- else
- clkClockSource = OTHER_SOURCE;
-
- if (INTERNAL_RC == clkClockSource)
- {
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- ASM (
- "push r21 \n\t"
-
- "ldi r21, 0x80 \n\t" /* CLKPR = 1 << CLKPCE */
- "sts 0x0061, r21 \n\t" /* CLKPR = 1 << CLKPCE */
-
-#if (F_CPU == 4000000ul)
- "ldi r21, 0x01 \n\t" /* CLKPR = 1 << CLKPS0 (1 cycle) */
- "sts 0x0061, r21 \n\t" /* CLKPR = 1 << CLKPS0 (2 cycle) */
-#endif
-#if (F_CPU == 8000000ul)
- "ldi r21, 0x00 \n\t" /* CLKPR = 0 (1 cycle) */
- "sts 0x0061, r21 \n\t" /* CLKPR = 0 (2 cycle) */
-#endif
-
- "pop r21 \n\t"
- );
-
- END_MEASURE(HALATOM_INITFREQ_TIME_LIMIT)
- ATOMIC_SECTION_LEAVE
- halStartingCalibrate();
- }
-}
-
-/**************************************************************************//**
-\brief Return clock source
-
-\return
- clock source.
-******************************************************************************/
-ClkSource_t halGetClockSource(void)
-{
- return clkClockSource;
-}
-
-/**************************************************************************//**
-\brief System clock.
-
-\return
- system clock in Hz.
-******************************************************************************/
-uint32_t HAL_ReadFreq(void)
-{
- return (uint32_t)F_CPU;
-}
-
-// eof halClkCtrl.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halEeprom.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halEeprom.c
deleted file mode 100644
index 0dfda94e..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halEeprom.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/**************************************************************************//**
- \file halEeprom.c
-
- \brief Implementation of the hardware dependent the EEPROM module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <atomic.h>
-#include <halEeprom.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Writes a byte to EEPROM.
-Parameters:
- EECRMask - mask that define capability of interrupt after byte writing.
- address - address of byte
- data - data.
-Returns:
- none.
-******************************************************************************/
-void halEepromWrite(uint8_t EECRMask, uint16_t address, uint8_t data)
-{
- while (EECR & (1 << EEPE)); // wait for completion of previous eeprom write
- while (SPMCSR & (1 << SPMEN)); // wait for completion of previous program memory write
- EEAR = address;
- EEDR = data;
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- EECR = EECRMask;
- EECR |= (1 << EEPE);
- END_MEASURE(HALISR_EEPROM_WRITE_TIME_LIMIT)
- ATOMIC_SECTION_LEAVE
-}
-
-/******************************************************************************
-Interrupt handler.
-******************************************************************************/
-ISR(EE_READY_vect)
-{
- BEGIN_MEASURE
- EECR &= ~(1 << EERIE); //disable interrupt
- halSigEepromReadyInterrupt();
- END_MEASURE(HALISR_EEPROM_READY_TIME_LIMIT)
-}
-
-// eof helEeprom.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halInit.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halInit.c
deleted file mode 100644
index 593e6257..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halInit.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/**************************************************************************//**
- \file halInit.c
-
- \brief HAL start up module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halAppClock.h>
-#include <halSleepTimerClock.h>
-#include <halRfSpi.h>
-#include <halIrq.h>
-#include <halInterrupt.h>
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/******************************************************************************
- Reads uid from external devices.
-******************************************************************************/
-void halReadUid(void);
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Performs start up HAL initialization.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-void HAL_Init(void)
-{
- /* Init first diagnostic timer */
-#ifdef MEASURE
- TCCR5B = (1 << CS50);
-#endif
-
- HAL_InitRfSpi();
- /* start sleep time */
- halStartSleepTimerClock();
- /* initialization work frequency &
- * start calibration */
- halInitFreq();
- /* Reads unique ID */
- halReadUid();
- /* initialization and start application timer */
- halInitAppClock();
- /* initialization dtr interrupt */
- halSetIrqConfig(IRQ_4, IRQ_LOW_LEVEL);
- /* global enable interrupt*/
- HAL_EnableInterrupts();
-}
-// eof halInit.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halIrq.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halIrq.c
deleted file mode 100644
index b119fe4d..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halIrq.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/**************************************************************************//**
- \file halIrq.c
-
- \brief Implementation of HWD IRQ interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halIrq.h>
-#include <sleep.h>
-#include <halSleepTimerClock.h>
-#include <halAppClock.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-#if defined(PLATFORM_ZIGBIT)
- IrqCallback_t IrqCallbackList[HAL_NUM_IRQ_LINES] = {NULL, NULL};
-#else
- IrqCallback_t IrqCallbackList[HAL_NUM_IRQ_LINES] = {NULL, NULL, NULL};
-#endif
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Sets configuration of pins and the registers.
-Parameters:
- irqNumber - number of interrupt.
- irqMode - mode of interrupt
-Returns:
- none.
-******************************************************************************/
-void halSetIrqConfig(uint8_t irqNumber, uint8_t irqMode)
-{
- uint8_t ui8ShiftCount = (irqNumber - IRQ_4) << 1;
- // IRQ pin is input
- DDRE &= ~(1 << irqNumber);
- PORTE |= (1 << irqNumber);
- // Clear previous settings of corresponding interrupt sense control
- EICRB &= ~(3 << ui8ShiftCount);
- // Setup corresponding interrupt sence control
- EICRB |= (irqMode & 0x03) << ui8ShiftCount;
- // Clear the INTn interrupt flag
- EIFR |= (1 << irqNumber);
-}
-
-/**************************************************************************//**
-\brief Clears configuration of pins and the registers.
-\param[in]
- irqNumber - number of interrupt.
-******************************************************************************/
-void halClrIrqConfig(uint8_t irqNumber)
-{
- uint8_t ui8ShiftCount = (irqNumber - IRQ_4) << 1;
- DDRE &= ~(1 << irqNumber);// IRQ pin is input
- PORTE &= ~(1 << irqNumber); // pullup off
- EICRB &= ~(3 << ui8ShiftCount);
-}
-
-#if !defined(PLATFORM_ZIGBIT)
-/******************************************************************************
- External interrupt 5 handler
-******************************************************************************/
-ISR(INT5_vect)
-{
- BEGIN_MEASURE
- halWakeupFromIrq();
- /* user's callback */
- if (NULL != IrqCallbackList[IRQ_5 - HAL_FIRST_VALID_IRQ])
- IrqCallbackList[IRQ_5 - HAL_FIRST_VALID_IRQ]();
- END_MEASURE(HALISR_INT5_VECT_TIME_LIMIT)
-}
-#endif
-
-/******************************************************************************
- External interrupt 6 handler
-******************************************************************************/
-ISR(INT6_vect)
-{
- BEGIN_MEASURE
- halWakeupFromIrq();
- /* user's callback */
- if (NULL != IrqCallbackList[IRQ_6 - HAL_FIRST_VALID_IRQ])
- IrqCallbackList[IRQ_6 - HAL_FIRST_VALID_IRQ]();
- END_MEASURE(HALISR_INT6_VECT_TIME_LIMIT)
-}
-
-/******************************************************************************
- External interrupt 7 handler
-******************************************************************************/
-ISR(INT7_vect)
-{
- BEGIN_MEASURE
- halWakeupFromIrq();
- /* user's callback */
- if (NULL != IrqCallbackList[IRQ_7 - HAL_FIRST_VALID_IRQ])
- IrqCallbackList[IRQ_7 - HAL_FIRST_VALID_IRQ]();
- END_MEASURE(HALISR_INT7_VECT_TIME_LIMIT)
-}
-// eof irq.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halPwm.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halPwm.c
deleted file mode 100644
index d5cd8a74..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halPwm.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/**************************************************************************//**
- \file halPwm.c
-
- \brief Implementation of hardware depended PWM interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/11/08 A. Taradov - Created
- 5/04/11 A.Razinkov - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <halPwm.h>
-#include <atomic.h>
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-
-/**************************************************************************//**
-\brief Prepare PWM channel access. Determine control registers, ports, pins etc.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halPreparePwmChannelAccess(HAL_PwmDescriptor_t *descriptor)
-{
- /* PWM output port and pin determination */
- switch (descriptor->unit)
- {
- case PWM_UNIT_1:
- descriptor->service.DDRn = &DDRB;
- descriptor->service.pwmBaseChannelPin = PWM_UNIT_1_BASE_CHANNEL_PIN;
- break;
-
- case PWM_UNIT_3:
- descriptor->service.DDRn = &DDRE;
- descriptor->service.pwmBaseChannelPin = PWM_UNIT_3_BASE_CHANNEL_PIN;
- break;
-
- /* Invalid PWM unit identifier */
- default:
- break;
- }
- /* PWM control registers determination */
- descriptor->service.COMnx0 = COMNX0_BASE_BIT - (descriptor->channel * COMNX_BITFIELD_SIZE);
- descriptor->service.OCRnx = (&OCRnA(descriptor->unit) + (descriptor->channel));
-}
-
-/**************************************************************************//**
-\brief Initializes the PWM.
-
-\param [in] pwmUnit - PWM unit number.
- Equal to ID of Timer/Counter witch serves PWM module.
-******************************************************************************/
-void halOpenPwm(HAL_PwmUnit_t pwmUnit)
-{
- /* Clear Timer/Counter */
- halMoveWordToRegister(&TCNTn(pwmUnit), 0x0000);
- /* Clear Timer/Counter Input Capture register */
- halMoveWordToRegister(&ICRn(pwmUnit), 0x0000);
- /* Configure port for normal operation */
- TCCRnA(pwmUnit) = 0x00;
- /* Configure PWM mode: phase and frequency correct, TOP = ICRn */
- TCCRnB(pwmUnit) = (1 << WGMn3);
-}
-
-/**************************************************************************//**
-\brief Starts PWM on specified channel.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halStartPwm(HAL_PwmDescriptor_t *descriptor)
-{
- /* Force compare on channel to clear output */
- TCCRnC(descriptor->unit) |= (1 << (FOCNX_BASE_BIT - descriptor->channel));
- /* Configure PWM pin as output */
- halMakeOutPwmPin(descriptor);
- /* Configure Compare Output Mode for PWM channel */
- TCCRnA(descriptor->unit) |=
- ((1 << COMnx1(descriptor)) | (1 << COMnx0(descriptor)));
- if (PWM_POLARITY_INVERTED == descriptor->polarity)
- TCCRnA(descriptor->unit) &= ~(1 << COMnx0(descriptor));
-}
-
-/**************************************************************************//**
-\brief Stops PWM on specified channel.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halStopPwm(HAL_PwmDescriptor_t *descriptor)
-{
- /* Clean compare register and stop Timer/Counter */
- halMoveWordToRegister(&OCRnx(descriptor), 0x0000);
- TCCRnA(descriptor->unit) &= ~((1 << COMnx1(descriptor)) | (1 << COMnx0(descriptor)));
- /* Configure PWM pin as intput */
- halMakeInPwmPin(descriptor);
-}
-
-/**************************************************************************//**
-\brief Sets base frequency of module. Common for all module channels.
-
-\param [in] pwmUnit - PWM unit number. Equal to corresponding Timer/Counter ID.
-\param [in] top - value for the TOP register.
-\param [in] prescaler - clock prescaler.
-******************************************************************************/
-void halSetPwmFrequency(HAL_PwmUnit_t pwmUnit, uint16_t top, HAL_PwmPrescaler_t prescaler)
-{
- /* Stop Timer/Counter */
- TCCRnB(pwmUnit) &= ~((1 << CSn2) | (1 << CSn1) | (1 << CSn0));
- /* Set new TOP register (ICRn in our case) */
- halMoveWordToRegister(&ICRn(pwmUnit), top);
- /* Initialize Timer/Counter with new TOP value */
- halMoveWordToRegister(&TCNTn(pwmUnit), top);
- /* Clear all PWM outputs */
- halMoveWordToRegister(&OCRnA(pwmUnit), 0x0000);
- halMoveWordToRegister(&OCRnB(pwmUnit), 0x0000);
- halMoveWordToRegister(&OCRnC(pwmUnit), 0x0000);
-
- /* Run Timer/Counter */
- TCCRnB(pwmUnit) |= prescaler;
-}
-
-/**************************************************************************//**
-\brief Sets compare value for the PWM channel.
-
-\param [in] descriptor - PWM channel descriptor.
-******************************************************************************/
-void halSetPwmCompareValue(HAL_PwmDescriptor_t *descriptor, uint16_t cmpValue)
-{
- halMoveWordToRegister(&OCRnx(descriptor), cmpValue);
-}
-
-/**************************************************************************//**
-\brief Closes the PWM.
-
-\param [in] pwmUnit - PWM unit number.
- Equal to ID of Timer/Counter witch serves PWM module.
-******************************************************************************/
-void halClosePwm(HAL_PwmUnit_t pwmUnit)
-{
- /* Configure port for normal operation */
- TCCRnA(pwmUnit) = 0x00;
- /* Disable PWM and stop timer */
- TCCRnB(pwmUnit) = 0x00;
-}
-
-// eof halPwm.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleep.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleep.c
deleted file mode 100644
index 305dfd39..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleep.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/**************************************************************************//**
- \file halSleep.c
-
- \brief Implementation of sleep modes.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 1/12/09 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <sleepTimer.h>
-#include <halSleepTimerClock.h>
-#include <halRfPio.h>
-#include <halRfCtrl.h>
-#include <halSleep.h>
-#include <halIrq.h>
-#include <halDbg.h>
-#include <halAppClock.h>
-#include <halEeprom.h>
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Performs calibration of the main clock generator.
-******************************************************************************/
-void halStartingCalibrate(void);
-
-#ifdef _HAL_RF_RX_TX_INDICATOR_
-/**************************************************************************//**
-\brief Turn on pin 1 (DIG3) and pin 2 (DIG4) to indicate the transmit state of
-the radio transceiver.
-******************************************************************************/
-void phyRxTxSwitcherOn(void);
-
-/**************************************************************************//**
-\brief Turn off pin 1 (DIG3) and pin 2 (DIG4) to indicate the transmit state of
-the radio transceiver.
-******************************************************************************/
-void phyRxTxSwitcherOff(void);
-
-#endif
-
-#ifdef _HAL_ANT_DIVERSITY_
-/**************************************************************************//**
-\brief Turn on pin 9 (DIG1) and pin 10 (DIG2) to enable antenna select.
-******************************************************************************/
-void phyAntennaSwitcherOn(void);
-
-/**************************************************************************//**
-\brief Turn off pin 9 (DIG1) and pin 10 (DIG2) to disable antenna select.
-******************************************************************************/
-void phyAntennaSwitcherOff(void);
-
-#endif // _HAL_ANT_DIVERSITY_
-
-/******************************************************************************
- External global variables section
-******************************************************************************/
-extern volatile bool halEnableDtrWakeUp;
-extern HalSleepControl_t halSleepControl;
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-static uint32_t halTimeStartOfSleep = 0ul;
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/**************************************************************************//**
-\brief Switch on system power.
-
-\param[in]
- wakeupSource - wake up source
-******************************************************************************/
-void halPowerOn(const uint8_t wakeupSource)
-{
- halSleepControl.wakeupStation = HAL_ACTIVE_MODE;
- halSleepControl.wakeupSource = wakeupSource;
-
- if (INTERNAL_RC == halGetClockSource())
- {
- GPIO_RF_SLP_TR_clr();
- }
- else
- {
- GPIO_RF_SLP_TR_make_in();
- TCCR2A &= ~((1 << COM2A1) | (1 << COM2A0)); // no compare
- while (ASSR & HAL_ASSR_FLAGS);
- }
- GPIO_RF_SLP_TR_make_out();
-
- #ifdef _HAL_USE_AMPLIFIER_
- // set one on pin. Enable power amplifier.
- GPIO_POW_AMPLF_SLP_set();
- #endif
-
- halPostTask4(HAL_WAKEUP);
-}
-
-/******************************************************************************
-Shutdowns system.
- NOTES:
- the application should be sure the poweroff will not be
- interrupted after the execution of the sleep().
-******************************************************************************/
-void halPowerOff(void)
-{
- if (HAL_ACTIVE_MODE == halSleepControl.wakeupStation)
- return; // it is a too late to sleep.
-
- // stop application timer clock
- halStopAppClock(); // will be shutdown
- if (0ul == halTimeStartOfSleep)
- { // start of sleep procedure
- // save time of stopping of the application timer
- halTimeStartOfSleep = halGetTimeOfSleepTimer();
- }
-
- #ifdef _HAL_USE_AMPLIFIER_
- // set zero on pin. Disable power amplifier.
- GPIO_POW_AMPLF_SLP_clr();
- #endif
-
- #ifdef _HAL_RF_RX_TX_INDICATOR_
-
- // disable front end driver if that is supported
- phyRxTxSwitcherOff();
-
- #endif
-
- #ifdef _HAL_ANT_DIVERSITY_
-
- // disable antenna diversity switcher
- phyAntennaSwitcherOff();
-
- #endif
-
- if (halEnableDtrWakeUp)
- { /* enable DTR (irq 4) wake up */
- halEnableIrqInterrupt(IRQ_4);
- } /* enable DTR (irq 4) wake up */
-
- // wait for end of eeprom writing
- halWaitEepromReady();
-
- if (INTERNAL_RC == halGetClockSource())
- {
- GPIO_RF_SLP_TR_set();
- GPIO_RF_SLP_TR_make_out();
-
- if (HAL_SLEEP_TIMER_IS_STARTED == halSleepControl.sleepTimerState)
- { // sleep timer is started
- SMCR = (1 << SM1) | (1 << SM0) | (1 << SE); // power-save
- __SLEEP;
- SMCR = 0;
- }
- else
- {
- halStopSleepTimerClock();
- SMCR = (1 << SM1) | (1 << SE); // power-down
- __SLEEP;
- SMCR = 0;
- halStartSleepTimerClock();
- halStartingCalibrate();
- }
- }
- else
- {
- uint8_t timsk4 = TIMSK4;
- uint8_t twcr = TWCR;
- uint8_t adcsra = ADCSRA;
- TIMSK4 = 0;
- TWCR = 0;
- ADCSRA = 0;
- GPIO_RF_SLP_TR_make_out();
- SMCR = (1 << SM1) | (1 << SM0) | (1 << SE); // power-save
- __SLEEP;
- SMCR = 0;
- TIMSK4 = timsk4;
- TWCR = twcr;
- ADCSRA = adcsra;
- }
-
- // wait for time about 1 TOSC1 cycle for correct re-entering from power save mode to power save mode
- // wait for time about 1 TOSC1 cycle for correct reading TCNT2 after wake up to
- OCR2B = SOME_VALUE_FOR_SYNCHRONIZATION;
- while (ASSR & HAL_ASSR_FLAGS);
-}
-
-/******************************************************************************
- Prepares system for power-save, power-down.
- Power-down the mode is possible only when internal RC is used
- Parameters:
- none.
- Returns:
- -1 there is no possibility to power-down system.
-******************************************************************************/
-int HAL_Sleep(void)
-{
- if (INTERNAL_RC != halGetClockSource())
- {
- if (HAL_SLEEP_TIMER_IS_STOPPED == halSleepControl.sleepTimerState)
- { // sleep timer isn't started
- return -1;
- }
- GPIO_RF_SLP_TR_make_in();
-
- while (ASSR & HAL_ASSR_FLAGS);
- if (!(TIMSK2 & (1 << OCIE2A)))
- { // compare interrupt is disabled
- OCR2A = 0xFF;
- while (ASSR & HAL_ASSR_FLAGS);
- }
-
- TCCR2A |= ((1 << COM2A1) | (1 << COM2A0)); // set OC2A on compare
- while (ASSR & HAL_ASSR_FLAGS);
- TCCR2B |= (1 << FOC2A); // force output to set OC2A
- while (ASSR & HAL_ASSR_FLAGS);
- TCCR2A &= ~((1 << COM2A1) | (1 << COM2A0)); // no compare
- while (ASSR & HAL_ASSR_FLAGS);
- TCCR2A |= (1 << COM2A1); // clear OC2A on compare
- while (ASSR & HAL_ASSR_FLAGS);
- }
-
- halSleepControl.wakeupStation = HAL_SLEEP_MODE; // the reset of sign of entry to the sleep mode.
- while (ASSR & HAL_ASSR_FLAGS);
- halPostTask4(HAL_SLEEP);
- return 0;
-}
-
-/******************************************************************************
- Handler for task manager. It is executed when system has waked up.
-******************************************************************************/
-void halWakeupHandler(void)
-{
- uint32_t timeEndOfSleep;
-
- // save time of stopping of the application timer
- timeEndOfSleep = halGetTimeOfSleepTimer();
-
- timeEndOfSleep -= halTimeStartOfSleep; // time of sleep
- halTimeStartOfSleep = 0ul;
- // adjust application timer interval
- halAdjustSleepInterval(timeEndOfSleep);
- // start application timer clock
- halStartAppClock();
- // Wait for when radio will be waked up.
- halWaitRadio();
-
- #ifdef _HAL_ANT_DIVERSITY_
-
- // enable antenna diversity switcher
- phyAntennaSwitcherOn();
-
- #endif
-
- #ifdef _HAL_RF_RX_TX_INDICATOR_
-
- // enable front end driver if that is supported
- phyRxTxSwitcherOn();
-
- #endif
-
- if (HAL_SLEEP_TIMER_IS_WAKEUP_SOURCE == halSleepControl.wakeupSource)
- {
- if (halSleepControl.callback)
- halSleepControl.callback();
- }
-}
-
-/*******************************************************************************
- Makes MCU enter Idle mode.
-*******************************************************************************/
-void HAL_IdleMode(void)
-{
- SMCR = 0x1;
- __SLEEP;
- SMCR = 0;
-}
-
-// eof sleep.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleepTimerClock.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleepTimerClock.c
deleted file mode 100644
index 70038e7f..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSleepTimerClock.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/**************************************************************************//**
- \file halSleepTimer.c
-
- \brief Module for count out requested sleep interval.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- 7/04/09 A. Khromykh - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <sleepTimer.h>
-#include <halSleepTimerClock.h>
-#include <halSleep.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define LSB_IN_DWORD(A) ((uint32_t)A & 0x000000FF)
-#define MULTIPLY_ON_31d25(A) (((uint32_t)A << 5) - (uint32_t)A + ((uint32_t)A >> 2))
-#define MAX_TIMER_VALUE 0xFF
-#define SLEEP_TIMER_ITERATOR (1000ul * 256ul * SLEEPTIMER_DIVIDER / SLEEPTIMER_CLOCK)
-
-/******************************************************************************
- Types section
-******************************************************************************/
-typedef struct
-{
- volatile uint16_t interval; // Contains number of timer full interval before will load reminder.
- volatile uint8_t remainder; // Contains number of ticks that passed before timer firing
-} TimerControl_t;
-
-/******************************************************************************
- External global variables section
-******************************************************************************/
-extern HalSleepControl_t halSleepControl;
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-static volatile TimerControl_t halTimerControl;
-// time of sleep timer in ms.
-static uint32_t halSleepTime = 0ul;
-// upper byte of sleep time
-uint8_t halSleepTimerOvfw = 0;
-// interrupt counter
-static volatile uint8_t halIrqOvfwCount = 0;
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/**************************************************************************//**
-\brief Clear timer control structure
-******************************************************************************/
-void halClearTimeControl(void)
-{
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- // clear timer control structure
- halTimerControl.remainder = 0;
- halTimerControl.interval = 0;
- END_MEASURE(HALATOM_CLEAR_TIME_CONTROL_TIME_LIMIT)
- ATOMIC_SECTION_LEAVE
-}
-
-/**************************************************************************//**
-\brief Wake up procedure for all external interrupts
-******************************************************************************/
-void halWakeupFromIrq(void)
-{
- if (HAL_SLEEP_MODE == halSleepControl.wakeupStation)
- {
- halPowerOn(HAL_EXT_IRQ_IS_WAKEUP_SOURCE);
- // disable compare match interrupt
- TIMSK2 &= ~(1 << OCIE2A);
- // clear timer control structure
- halClearTimeControl();
- // stop high sleep timer logic
- halSleepControl.sleepTimerState = HAL_SLEEP_TIMER_IS_STOPPED;
- }
-}
-
-/******************************************************************************
-Starts the sleep timer clock.
-******************************************************************************/
-void halStartSleepTimerClock(void)
-{
- //1. Disable the Timer/Counter2 interrupts by clearing OCIE2x and TOIE2.
- halDisableSleepTimerInt();
- //2. Select clock source by setting AS2 as appropriate.
- ASSR |= (1 << AS2); // clock source is TOSC1 pin
- //3. Write new values to TCNT2, OCR2x, and TCCR2x.
- TCNT2 = 0;
- TCCR2A = 0x00; // normal operation, OC2A&OC2B disconnected
- TCCR2B = 0x00;
- OCR2A = 0x00;
- //4. To switch to asynchronous operation: Wait for TCN2UB, OCR2xUB, and TCR2xUB.
- while (ASSR & HAL_ASSR_FLAGS);
- //5. Clear the Timer/Counter2 Interrupt Flags.
- TIFR2 = (1 << OCF2A) | (1 << TOV2);
- //6. Enable interrupts, if needed.
- TCCR2B = SLEEPTIMER_PRESCALER; // start timer
- TIMSK2 |= (1 << TOIE2); // enable overflow interrupt
-}
-
-/******************************************************************************
-Stops the sleep timer clock.
-******************************************************************************/
-void halStopSleepTimerClock(void)
-{
- while (ASSR & HAL_ASSR_FLAGS);
- //1. Disable the Timer/Counter2 interrupts by clearing OCIE2x and TOIE2.
- halDisableSleepTimerInt();
- TCCR2B &= ~SLEEPTIMER_PRESCALER; // Stops the timer
- GTCCR |= (1 << PSRASY); // Reset prescaler
- while (ASSR & HAL_ASSR_FLAGS);
- // switch of oscillator
- ASSR &= ~(1 << AS2);
-}
-
-/******************************************************************************
-Sets interval.
-Parameters:
- value - contains number of ticks which the timer must count out.
-Returns:
- none.
-******************************************************************************/
-void halSetSleepTimerInterval(uint32_t value)
-{
- uint8_t currCounter = TCNT2;
- uint32_t tempValue = LSB_IN_DWORD(~currCounter);
-
- if (value > tempValue)
- {
- value -= tempValue;
- // halTimerControl.interval = value / 255
- halTimerControl.interval = value >> 8;
- halTimerControl.remainder = value & 0xFF;
- }
- else
- { // enough timer reminder before overflow
- currCounter += (uint8_t)value;
- // wait for end of synchronization
- while (ASSR & HAL_ASSR_FLAGS);
- // load compared value
- OCR2A = currCounter;
- // clear compare interrupt flag
- TIFR2 = 1 << OCF2A;
- // enable compare match interrupt
- TIMSK2 |= (1 << OCIE2A);
- }
-}
-
-/******************************************************************************
-Return time of sleep timer.
-
-Returns:
- time in ms.
-******************************************************************************/
-uint32_t halGetTimeOfSleepTimer(void)
-{
- uint32_t tempValue;
- uint8_t tmpCounter;
-
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- // read interrupt counter
- tmpCounter = halIrqOvfwCount;
- // read asynchronous counter
- tempValue = TCNT2;
- // wait for setup asynchronous registers
- OCR2B = SOME_VALUE_FOR_SYNCHRONIZATION;
- while (ASSR & HAL_ASSR_FLAGS);
- if (TIFR2 & (1 << TOV2))
- { // there is issued interrupt
- tempValue = TCNT2;
- tempValue += MAX_TIMER_VALUE;
- }
- END_MEASURE(HAL_GET_SLEEP_TIME_LIMIT)
- ATOMIC_SECTION_LEAVE
-
- tempValue += tmpCounter * MAX_TIMER_VALUE;
-
- #if defined(SLEEP_PRESCALER_1024)
- // one tick time 31.25 ms.
- return (halSleepTime + MULTIPLY_ON_31d25(tempValue));
- #else
- #warning 'to do counting sleep timer for that prescaler'
- return (halSleepTime + tempValue * (1000 * SLEEPTIMER_DIVIDER / SLEEPTIMER_CLOCK));
- #endif
-}
-
-/******************************************************************************
-Returns the sleep timer frequency in Hz.
-Parameters:
- none.
-Returns:
- frequency.
-******************************************************************************/
-uint32_t halSleepTimerFrequency(void)
-{
- return (SLEEPTIMER_CLOCK / SLEEPTIMER_DIVIDER);
-}
-
-/**************************************************************************//**
-Synchronization system time which based on sleep timer.
-******************************************************************************/
-void halSleepSystemTimeSynchronize(void)
-{
- uint8_t tmpCounter;
- uint32_t tmpValue;
-
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- tmpCounter = halIrqOvfwCount;
- halIrqOvfwCount = 0;
- END_MEASURE(HAL_SLEEP_TIMER_SYNCHRONIZE_LIMIT)
- ATOMIC_SECTION_LEAVE
-
- tmpValue = tmpCounter * SLEEP_TIMER_ITERATOR;
- halSleepTime += tmpValue;
- if (halSleepTime < tmpValue)
- halSleepTimerOvfw++;
-}
-
-/******************************************************************************
-Compare interrupt handler.
-******************************************************************************/
-ISR(TIMER2_COMPA_vect)
-{
- BEGIN_MEASURE
- // disable compare match interrupt
- TIMSK2 &= ~(1 << OCIE2A);
- // nulling for adjusting
- halTimerControl.remainder = 0;
- if (HAL_SLEEP_MODE == halSleepControl.wakeupStation)
- halPowerOn(HAL_SLEEP_TIMER_IS_WAKEUP_SOURCE);
- // post task for task manager
- if (HAL_SLEEP_TIMER_IS_STARTED == halSleepControl.sleepTimerState)
- halInterruptSleepClock();
- END_MEASURE(HALISR_TIMER2_COMPA_TIME_LIMIT)
-}
-
-/******************************************************************************
-Overflow interrupt handler.
-******************************************************************************/
-ISR(TIMER2_OVF_vect)
-{
- BEGIN_MEASURE
- if (0 == halTimerControl.interval)
- {
- if (0 == halTimerControl.remainder)
- {
- if (HAL_SLEEP_MODE == halSleepControl.wakeupStation)
- halPowerOn(HAL_SLEEP_TIMER_IS_WAKEUP_SOURCE);
- // post task for task manager
- if (HAL_SLEEP_TIMER_IS_STARTED == halSleepControl.sleepTimerState)
- halInterruptSleepClock();
- }
- else
- {
- // wait for end of synchronization
- while (ASSR & HAL_ASSR_FLAGS);
- // load compared value
- OCR2A = halTimerControl.remainder;
- // clear compare interrupt flag
- TIFR2 = 1 << OCF2A;
- // enable compare match interrupt
- TIMSK2 |= (1 << OCIE2A);
- if (HAL_SLEEP_MODE == halSleepControl.wakeupStation)
- HAL_Sleep();
- }
- }
- else
- {
- halTimerControl.interval--;
- if (HAL_SLEEP_MODE == halSleepControl.wakeupStation)
- HAL_Sleep();
- }
-
- halIrqOvfwCount++;
- halSynchronizeSleepTime();
-
- END_MEASURE(HALISR_TIMER2_OVF_TIME_LIMIT)
-}
-
-//eof halSleepTimerClock.c
-
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSpi.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSpi.c
deleted file mode 100644
index b0c8bf0a..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halSpi.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/**************************************************************************//**
-\file halSpi.c
-
-\brief Implementation of USART SPI mode.
-
-\author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
-\internal
- History:
- 29/06/07 E. Ivanov - Created
-******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <spi.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define UDORD0 2
-#define UCPHA0 1
-#define UCPOL0 0
-#define SPI_CLOCK_MODE_AMOUNT 4
-#define SPI_DATA_ORDER_AMOUNT 2
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Set the parameters of USART to work at SPI mode.
-Parameters:
- descriptor - pointer to the spi descriptor.
-Returns:
- none.
-******************************************************************************/
-void halSetUsartSpiConfig(HAL_SpiDescriptor_t *descriptor)
-{
- uint8_t clockMode[SPI_CLOCK_MODE_AMOUNT] = {((0 << UCPOL0) | (0 << UCPHA0)),
- ((0 << UCPOL0) | (1 << UCPHA0)),
- ((1 << UCPOL0) | (0 << UCPHA0)),
- ((1 << UCPOL0) | (1 << UCPHA0))};
- uint8_t dataOrder[SPI_DATA_ORDER_AMOUNT] = {(0 << UDORD0),
- (1 << UDORD0)};
-
- // setting of the spi gpio direct
- if (SPI_CHANNEL_0 == descriptor->tty)
- GPIO_USART0_EXTCLK_make_out();
- else
- GPIO_USART1_EXTCLK_make_out();
-
- UBRRn(descriptor->tty) = 0;
- // Set MSPI mode
- UCSRnC(descriptor->tty) = (1 << UMSEL01) | (1 << UMSEL00);
- // Set clock mode and data order
- UCSRnC(descriptor->tty) |= (dataOrder[descriptor->dataOrder] | clockMode[descriptor->clockMode]);
- // Enable receiver and transmitter
- UCSRnB(descriptor->tty) = (1 << RXEN0) | (1 << TXEN0);
- // Set baud rate
- UBRRn(descriptor->tty) = descriptor->baudRate;
-}
-
-/******************************************************************************
-Disables USART channel.
-Parameters:
- tty - spi channel.
-******************************************************************************/
-void halClearUsartSpi(SpiChannel_t tty)
-{
- if (SPI_CHANNEL_0 == tty)
- GPIO_USART0_EXTCLK_make_in();
- else
- GPIO_USART1_EXTCLK_make_in();
-
- UCSRnB(tty) = 0x00; // disable
-}
-
-/******************************************************************************
-Write a length bytes to the SPI.
-Parameters:
- tty - spi channel
- buffer - pointer to application data buffer;
- length - number bytes for transfer;
-Returns:
- number of written bytes
-******************************************************************************/
-uint16_t halSyncUsartSpiWriteData(SpiChannel_t tty, uint8_t *buffer, uint16_t length)
-{
- uint16_t i;
- uint8_t temp;
-
- for (i = 0; i < length; i++)
- {
- // Wait for empty transmit buffer
- while (!(UCSRnA(tty) & (1 << UDRE0)));
- // Send data
- UDRn(tty) = *(buffer + i);
- // Wait for data to be received
- while (!(UCSRnA(tty) & (1 << RXC0)));
- // receives data to clear received usart buffer
- temp = UDRn(tty);
- (void)temp;
- }
- return i;
-}
-
-/******************************************************************************
-Write & read a length bytes to & from the SPI.
-Parameters:
- tty - spi channel
- buffer - pointer to application data buffer;
- length - number bytes for transfer;
-Returns:
- number of written & read bytes
-******************************************************************************/
-uint16_t halSyncUsartSpiReadData(SpiChannel_t tty, uint8_t *buffer, uint16_t length)
-{
- uint16_t i;
-
- for (i = 0; i < length; i++)
- {
- // Wait for empty transmit buffer
- while (!(UCSRnA(tty) & (1 << UDRE0)));
- // Send data
- UDRn(tty) = *(buffer + i);
- // Wait for data to be received
- while (!(UCSRnA(tty) & (1 << RXC0)));
- // Receive data
- *(buffer + i) = UDRn(tty);
- }
- return i;
-}
-
-//end of halSpi.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halUsart.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halUsart.c
deleted file mode 100644
index 90388ed0..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halUsart.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/**************************************************************************//**
-\file halUsart.c
-
-\brief Implementation of usart hardware-dependent module.
-
-\author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
-\internal
- History:
- 29/05/07 E. Ivanov - Created
-*******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <sleep.h>
-#include <usart.h>
-#include <halSleepTimerClock.h>
-#include <halAppClock.h>
-#include <halIrq.h>
-#include <halDiagnostic.h>
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-void halPostUsartTask(HalUsartTaskId_t taskId);
-
-/******************************************************************************
- External global variables section
-******************************************************************************/
-extern volatile bool halEnableDtrWakeUp;
-extern void (* dtrWakeUpCallback)(void);
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/**************************************************************************//**
- \brief Sets USART module parameters.
- \param
- usartmode - pointer to HAL_UsartDescriptor_t
- \return
- none.
-******************************************************************************/
-void halSetUsartConfig(HAL_UsartDescriptor_t *usartMode)
-{
- UCSRnB(usartMode->tty) = 0x00; // disable usart
- UBRRn(usartMode->tty) = usartMode->baudrate; // usart speed
-
- if (USART_MODE_ASYNC == usartMode->mode)
- {
- UCSRnA(usartMode->tty) = (uint8_t)USART_DOUBLE_SPEED << U2X0; // Double the USART Transmition Speed
- UCSRnC(usartMode->tty) = 0x00;
- }
- else
- {
- UCSRnA(usartMode->tty) = 0;
- UCSRnC(usartMode->tty) = usartMode->edge; // edge select
- }
-
- UCSRnC(usartMode->tty) |= usartMode->mode;
- UCSRnC(usartMode->tty) |= usartMode->dataLength; // character size
- UCSRnC(usartMode->tty) |= usartMode->parity; // parity mode
- UCSRnC(usartMode->tty) |= usartMode->stopbits; // stop bit select
- UCSRnA(usartMode->tty) |= (1 << RXC0); // clear receive interrupt
- UCSRnB(usartMode->tty) |= (1 << RXEN1) | (1 << TXEN1); // usart enable
- UCSRnB(usartMode->tty) |= (1 << RXCIE0) ; // receive interrupt enable
-}
-
-/**************************************************************************//**
- \brief The interrupt handler of USART0 - data register is empty.
-******************************************************************************/
-ISR(USART0_UDRE_vect)
-{
- BEGIN_MEASURE
- // We must disable the interrupt because we must "break" context.
- halDisableUsartDremInterrupt(USART_CHANNEL_0);
- halPostUsartTask(HAL_USART_TASK_USART0_DRE);
- END_MEASURE(HALISR_USART0_UDR_TIME_LIMIT)
-}
-
-/**************************************************************************//**
- \brief The interrupt handler of USART0 - transmission is completed.
-******************************************************************************/
-ISR(USART0_TX_vect)
-{
- BEGIN_MEASURE
- halDisableUsartTxcInterrupt(USART_CHANNEL_0);
- halPostUsartTask(HAL_USART_TASK_USART0_TXC);
- END_MEASURE(HALISR_USART0_TX_TIME_LIMIT)
-}
-
-/**************************************************************************//**
- \brief The interrupt handler of USART0 - reception is completed.
-******************************************************************************/
-ISR(USART0_RX_vect)
-{
- BEGIN_MEASURE
- uint8_t status = UCSR0A;
- uint8_t data = UDR0;
-
- if (!(status & ((1 << FE0) | (1 << DOR0) | (1 << UPE0))))
- {
- halUsartRxBufferFiller(USART_CHANNEL_0, data);
- halPostUsartTask(HAL_USART_TASK_USART0_RXC);
- }
- #if defined(_USE_USART_ERROR_EVENT_)
- else // There is an error in the received byte.
- {
- halUsartSaveErrorReason(USART_CHANNEL_0, status);
- halPostUsartTask(HAL_USART_TASK_USART0_ERR);
- }
- #endif
-
- END_MEASURE(HALISR_USART0_RX_TIME_LIMIT)
-}
-
-/**************************************************************************//**
- \brief The interrupt handler of USART1 - data register is empty.
-******************************************************************************/
-ISR(USART1_UDRE_vect)
-{
- BEGIN_MEASURE
- // We must disable the interrupt because we must "break" context.
- halDisableUsartDremInterrupt(USART_CHANNEL_1);
- halPostUsartTask(HAL_USART_TASK_USART1_DRE);
- END_MEASURE(HALISR_USART1_UDRE_TIME_LIMIT)
-}
-
-/**************************************************************************//**
- \brief The interrupt handler of USART1 - transmission is completed.
-******************************************************************************/
-ISR(USART1_TX_vect)
-{
- BEGIN_MEASURE
- halDisableUsartTxcInterrupt(USART_CHANNEL_1);
- halPostUsartTask(HAL_USART_TASK_USART1_TXC);
- END_MEASURE(HALISR_USART1_TX_TIME_LIMIT)
-}
-
-/**************************************************************************//**
- \brief The interrupt handler of USART1 - reception is completed.
-******************************************************************************/
-ISR(USART1_RX_vect)
-{
- BEGIN_MEASURE
- uint8_t status = UCSR1A;
- uint8_t data = UDR1;
-
- if (!(status & ((1 << FE1) | (1 << DOR1) | (1 << UPE1))))
- {
- halUsartRxBufferFiller(USART_CHANNEL_1, data);
- halPostUsartTask(HAL_USART_TASK_USART1_RXC);
- }
- #if defined(_USE_USART_ERROR_EVENT_)
- else // There is an error in the received byte.
- {
- halUsartSaveErrorReason(USART_CHANNEL_1, status);
- halPostUsartTask(HAL_USART_TASK_USART1_ERR);
- }
- #endif
- END_MEASURE(HALISR_USART1_RX_TIME_LIMIT)
-}
-
-/**************************************************************************//**
-/brief External interrupt 4 (DTR) handler
-******************************************************************************/
-ISR(INT4_vect)
-{
- BEGIN_MEASURE
- halWakeupFromIrq();
-
- if (halEnableDtrWakeUp)
- { /* enable DTR (irq 4) wake up */
- halDisableIrqInterrupt(IRQ_4);
- } /* enable DTR (irq 4) wake up */
-
- if (NULL != dtrWakeUpCallback)
- dtrWakeUpCallback();
- END_MEASURE(HALISR_INT4_TIME_LIMIT)
-}
-// eof halUsart.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s
deleted file mode 100644
index 1c76747f..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s
+++ /dev/null
@@ -1,210 +0,0 @@
-/**************************************************************************//**
- \file halW1.s
-
- \brief Implementation of 1-wire hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-.include "halGccD.h"
-.set __w1_port, 0x14 ; PORTG
-.set __w1_bit, 5 ; PORTG5
-.set __w1_ddr, 0x13 ; DDRG
-.set __w1_pin, 0x12 ; PING
-
-/*=============================================================
- Resets all devices connected to the bus. Function asserts on
- the bus reset pulse and detects presence pulse. The result is
- contained in r24.
- Parameters:
- Returns:
- W1_SUCCESS_STATUS - If device(s) was(were) detected.
- W1_NO_DEVICE_STATUS - If device(s) was(were) not detected.
-===============================================================*/
-.global halResetW1
-.type halResetW1,@function
-halResetW1:
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
- ; Pull down
- sbi __w1_ddr, __w1_bit
- cbi __w1_port, __w1_bit
- ; Reset Low Time (500 us)
- ldi r24, 250
- call __delay_us
- ldi r24, 250
- call __delay_us
- ; Tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
- ; Presence-Detect Sample Time (70 us)
- ldi r24, 70
- call __delay_us
- ; Precense-Detect
- ldi r24, 0x01
- sbic __w1_pin, __w1_bit
- ldi r24, 0x00
- push r24
- ; Tail of Reset High Time
- ldi r24, 240
- call __delay_us
- pop r24
- ; Restore SREG
- out 0x3F, r23
- pop r23
- ret
-
-/*=============================================================
- Reads bit from the bus
- Returns:
- bit read from the bus in r24
-===============================================================*/
-.global halReadW1Bit
-.type halReadW1Bit,@function
-halReadW1Bit:
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
- ; Pull down
- sbi __w1_ddr, __w1_bit
- cbi __w1_port, __w1_bit
- ; Read Low Time (6 us)
- ldi r24, 6
- call __delay_us
- ; Tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
- ; Tail of Read Sample Time (10 us)
- ldi r24, 10
- call __delay_us
- ; Read Sample
- clc
- sbic __w1_pin, __w1_bit
- sec
- rol r24
- ; Tail of Timeslot Duration
- push r24
- ldi r24, 100
- call __delay_us
- pop r24
- ; Restore SREG
- out 0x3F, r23
- pop r23
- ret
-
-/*=============================================================
- Reads byte from the bus
- Returns:
- byte read from the bus in r24
-===============================================================*/
-.global halReadW1
-.type halReadW1,@function
-halReadW1:
- push r25
- push r23
- ldi r25, 8
-__read_bit_again:
- call halReadW1Bit
- ror r24
- ror r23
- dec r25
- tst r25
- brne __read_bit_again
- mov r24, r23
- pop r23
- pop r25
- ret
-
-/*=============================================================
- Writes bit to the bus
- Parameters:
- value - bit that should be written to the bus.
-===============================================================*/
-.global halWriteW1bit
-.type halWriteW1bit,@function
-halWriteW1bit:
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
- ; Pull down
- cbi __w1_port, __w1_bit
- sbi __w1_ddr, __w1_bit
- ; Write-1 Low Time
- push r24
- ldi r24, 6
- call __delay_us
- pop r24
- ; Write bit
- ror r24
- brcc __w1_write_zero
- ; Write-One -> tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
-__w1_write_zero:
- ; Tail of Timeslot Duration
- push r24
- ldi r24, 100
- call __delay_us
- pop r24
- ; Tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
- ; Restore SREG
- out 0x3F, r23
- pop r23
- ret
-
-/*=============================================================
- Writes byte to the bus
- Parameters:
- value - byte that should be written to the bus.
-===============================================================*/
-.global halWriteW1
-.type halWriteW1,@function
-halWriteW1:
- push r25
- ldi r25, 8
-__write_bit_again:
- call halWriteW1bit
- dec r25
- tst r25
- brne __write_bit_again
- pop r25
- ret
-
-/*=============================================================
- Delay in microseconds.
- Parameters:
- us - delay time in microseconds
-===============================================================*/
-.global __delay_us
-.type __delay_us,@function
-__delay_us:
-__w0:
-.if FCPU==8000000
- nop
- nop
- nop
- nop
-.endif
- dec r24
- tst r24
- brne __w0
- ret
-; eof halW1.s
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s90 b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s90
deleted file mode 100644
index a12f063d..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halW1.s90
+++ /dev/null
@@ -1,211 +0,0 @@
-/**************************************************************************//**
- \file halW1.s90
-
- \brief Implementation of 1-wire hardware-dependent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#include <halIarD.h>
-__w1_port VAR 0x14 ; PORTG
-__w1_bit VAR 5 ; PORTG5
-__w1_ddr VAR 0x13 ; DDRG
-__w1_pin VAR 0x12 ; PING
-
-/*=============================================================
- Resets all devices connected to the bus. Function asserts on
- the bus reset pulse and detects presence pulse. The result is
- contained in r16.
- Parameters:
- Returns:
- W1_SUCCESS_STATUS - If device(s) was(were) detected.
- W1_NO_DEVICE_STATUS - If device(s) was(were) not detected.
-===============================================================*/
-PUBLIC halResetW1
-RSEG CODE
-halResetW1:
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
- ; Pull down
- sbi __w1_ddr, __w1_bit
- cbi __w1_port, __w1_bit
- ; Reset Low Time (500 us)
- ldi r16, 250
- call __delay_us
- ldi r16, 250
- call __delay_us
- ; Tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
- ; Presence-Detect Sample Time (70 us)
- ldi r16, 70
- call __delay_us
- ; Precense-Detect
- ldi r16, 0x01
- sbic __w1_pin, __w1_bit
- ldi r16, 0x00
- push r16
- ; Tail of Reset High Time
- ldi r16, 240
- call __delay_us
- pop r16
- ; Restore SREG
- out 0x3F, r23
- pop r23
- ret
-
-/*=============================================================
- Reads bit from the bus
- Returns:
- bit read from the bus in r16
-===============================================================*/
-PUBLIC halReadW1Bit
-RSEG CODE
-halReadW1Bit:
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
- ; Pull down
- sbi __w1_ddr, __w1_bit
- cbi __w1_port, __w1_bit
- ; Read Low Time (6 us)
- ldi r16, 6
- call __delay_us
- ; Tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
- ; Tail of Read Sample Time (10 us)
- ldi r16, 10
- call __delay_us
- ; Read Sample
- clc
- sbic __w1_pin, __w1_bit
- sec
- rol r16
- ; Tail of Timeslot Duration
- push r16
- ldi r16, 100
- call __delay_us
- pop r16
- ; Restore SREG
- out 0x3F, r23
- pop r23
- ret
-
-/*=============================================================
- Reads byte from the bus
- Returns:
- byte read from the bus in r16
-===============================================================*/
-PUBLIC halReadW1
-RSEG CODE
-halReadW1:
- push r25
- push r23
- ldi r25, 8
-__read_bit_again:
- call halReadW1Bit
- ror r16
- ror r23
- dec r25
- tst r25
- brne __read_bit_again
- mov r16, r23
- pop r23
- pop r25
- ret
-
-/*=============================================================
- Writes bit to the bus
- Parameters:
- value - bit that should be written to the bus.
-===============================================================*/
-PUBLIC halWriteW1bit
-RSEG CODE
-halWriteW1bit:
- ; Store SREG
- push r23
- in r23, 0x3F
- ; Disable interrupts
- cli
- ; Pull down
- cbi __w1_port, __w1_bit
- sbi __w1_ddr, __w1_bit
- ; Write-1 Low Time
- push r16
- ldi r16, 6
- call __delay_us
- pop r16
- ; Write bit
- ror r16
- brcc __w1_write_zero
- ; Write-One -> tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
-__w1_write_zero:
- ; Tail of Timeslot Duration
- push r16
- ldi r16, 100
- call __delay_us
- pop r16
- ; Tri-state (external pullup)
- cbi __w1_ddr, __w1_bit
- ; Restore SREG
- out 0x3F, r23
- pop r23
- ret
-
-/*=============================================================
- Writes byte to the bus
- Parameters:
- value - byte that should be written to the bus.
-===============================================================*/
-PUBLIC halWriteW1
-RSEG CODE
-halWriteW1:
- push r25
- ldi r25, 8
-__write_bit_again:
- call halWriteW1bit
- dec r25
- tst r25
- brne __write_bit_again
- pop r25
- ret
-
-/*=============================================================
- Delay in microseconds.
- Parameters:
- us - delay time in microseconds
-===============================================================*/
-PUBLIC __delay_us
-RSEG CODE
-__delay_us:
-__w0:
-#if FCPU==8000000
- nop
- nop
- nop
- nop
-#endif
- dec r16
- tst r16
- brne __w0
- ret
-; eof halW1.s
-END
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halWdtInit.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halWdtInit.c
deleted file mode 100644
index eb2a9dff..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/halWdtInit.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/**************************************************************************//**
- \file halWdtInit.c
-
- \brief Implementation of WDT start up procedure.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <resetReason.h>
-#include <halAppClock.h>
-
-/******************************************************************************
- Defines section
-******************************************************************************/
-#define PIN_OUT 62500
-#define MEANING_BITS 0x1F
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-#ifdef _SYS_ASSERT_ON_
- INLINE void halJumpNullHandler(void);
-#endif
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-#if defined(__GNUC__)
- uint8_t halResetReason __attribute__ ((section (".noinit")));
-#elif defined(__ICCAVR__)
- __no_init uint8_t halResetReason;
-#endif
-
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Resets and stops wdt. Saves the reason of reset.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-#if defined(__GNUC__)
-
- void halWdtInit(void) __attribute__ ((naked)) \
- __attribute__ ((section (".init0")));
-
- void halWdtInit(void)
- {
- ASM("clr r1");
-#elif defined(__ICCAVR__)
-
- __task void halWdtInit(void)
- {
- ASM("clr r15");
-#else
- #error 'Compiler not supported.'
-#endif
-
- if (TEMP_WARM_RESET != halResetReason)
- {
- halResetReason = MCUSR & MEANING_BITS;
-
- if (halResetReason & POWER_ON_RESET)
- halResetReason = POWER_ON_RESET;
- }
- else
- {
- halResetReason = WARM_RESET;
- }
- MCUSR = 0;
- WDTCSR |= (1 << WDCE) | (1 << WDE);
- WDTCSR = 0x00;
-
- #ifdef _SYS_ASSERT_ON_
- halJumpNullHandler();
- #endif
- }
-
-#ifdef _SYS_ASSERT_ON_
-/******************************************************************************
-Jump to NULL handler.
-Parameters:
- none.
-Returns:
- none.
-******************************************************************************/
-void halJumpNullHandler(void)
-{
- if (0 == halResetReason) // was jump on NULL
- {
- register volatile uint16_t tmp;
- tmp = SP;
-
- ASM ("cli");
- DDRB |= 0xE0;
- /* Init UART*/
- UBRR1H = 0;
- #if (F_CPU == 4000000ul)
- UBRR1L = 12;
- #elif (F_CPU == 8000000ul)
- UBRR1L = 25;
- #endif
- UCSR1A = (1 << U2X1);
- UCSR1B = (1 << TXEN1);
- UCSR1C = (3 << UCSZ10); // 8-bit data
-
- /* Init timer counter 4.*/
- OCR4A = 0;
- /* Disable TC4 interrupt */
- TIMSK4 &= ~(1 << OCIE4A);
- /* main clk / 8 */
- TCCR4B = (1 << WGM12) | (1 << CS11);
-
- while (1)
- {
- do
- { /* Send byte to UART */
- while (!(UCSR1A & (1 << UDRE1)));
- UDR1 = *((uint8_t *)SP);
- SP++;
- } while (RAMEND >= SP);
- SP = tmp;
-
- PORTB |= 0x80;
- TCNT4 = 0;
- while(TCNT4 < PIN_OUT);
- PORTB &= ~0x80;
- PORTB |= 0x40;
- TCNT4 = 0;
- while(TCNT4 < PIN_OUT);
- PORTB &= ~0x40;
- PORTB |= 0x20;
- TCNT4 = 0;
- while(TCNT4 < PIN_OUT);
- PORTB &= ~0x20;
- }
- }
-}
-#endif
-
-#if defined(__GNUC__) && defined(_REPORT_STATS_)
-void halFillStack(void) __attribute__ ((naked, section (".init1")));
-/**************************************************************************//**
-\brief Fill cstack with repeated pattern 0xCD
-******************************************************************************/
-void halFillStack(void)
-{
- extern uint16_t __stack_start;
- extern uint16_t __stack;
-
- for (uint8_t *start = (uint8_t *)&__stack_start; start <= (uint8_t *)&__stack; start++)
- *start = 0xCD;
-}
-#endif
-
-// eof halWdtInit.c
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/i2c.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/i2c.c
deleted file mode 100644
index f118194e..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/i2c.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/**************************************************************************//**
- \file i2c.c
-
- \brief Provides the functionality of TWI.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <i2c.h>
-#include <halTaskManager.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-/******************************************************************************
- Implementations section
-******************************************************************************/
-/******************************************************************************
-Inits TWI module. Setup teh speed of TWI.
-Parameters:
- i2cMode - the speed of TWI.
-Returns:
- none.
-******************************************************************************/
-void halInitI2c(HAL_i2cMode_t *i2cMode)
-{
- TWCR = 0x00;
- TWSR = HAL_I2C_PRESCALER; // prescaler
- // Set bit rate
- TWBR = i2cMode->clockrate;
-}
-
-/******************************************************************************
-Interrupt handler.
-******************************************************************************/
-ISR(TWI_vect)
-{
- BEGIN_MEASURE
- switch (TWSR & 0xF8)
- {
- case TWS_START:
- case TWS_RSTART:
- halSendStartDoneI2c();
- break;
-
- case TWS_MT_SLA_ACK:
- case TWS_MT_DATA_ACK:
- halWriteDoneI2c();
- break;
-
- case TWS_BUSERROR:
- case TWS_MT_SLA_NACK:
- case TWS_MT_DATA_NACK:
- case TWS_MR_SLA_NACK:
- halI2cBusReset();
- break;
-
- case TWS_MR_SLA_ACK:
- halMasterReadWriteAddressAckI2c();
- break;
-
- case TWS_MR_DATA_ACK:
- halReadDoneI2c(halReadByteI2c());
- break;
-
- case TWS_MR_DATA_NACK:
- halReadLastByteDoneI2c(halReadByteI2c());
- break;
-
- default:
- break;
- }
- END_MEASURE(HALISR_TWI_TIME_LIMIT)
-}
-// eof i2c.c
-
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/wdt.c b/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/wdt.c
deleted file mode 100644
index d9c5a859..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/avr/atmega1281/common/src/wdt.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/**************************************************************************//**
- \file wdt.c
-
- \brief Implementation of WDT interrupt handler.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#include <wdtCtrl.h>
-#include <atomic.h>
-#include <halDbg.h>
-#include <halDiagnostic.h>
-
-/******************************************************************************
- Global variables section
-******************************************************************************/
-void (*halWdtCallback)(void) = NULL;
-
-/*******************************************************************************
-Registers WDT fired callback.
-Parameters:
- wdtCallback - callback.
-Returns:
- none.
-*******************************************************************************/
-void HAL_RegisterWdtCallback(void (*wdtCallback)(void))
-{
- halWdtCallback = wdtCallback;
-}
-
-/*******************************************************************************
-Starts WDT with interval.
-Parameters:
- interval - interval.
-Returns:
- none.
-*******************************************************************************/
-void HAL_StartWdt(HAL_WdtInterval_t interval)
-{
- uint8_t i = 0;
-
- if (halWdtCallback)
- i = (1<<WDE) | (1 << WDIE) | interval;
- else
- i = (1<<WDE) | interval;
-
- ATOMIC_SECTION_ENTER
- BEGIN_MEASURE
- wdt_reset();
- WDTCSR |= (1<<WDCE) | (1<<WDE);
- WDTCSR = i;
- END_MEASURE(HALATOM_STARTWDT_TIME_LIMIT)
- ATOMIC_SECTION_LEAVE
-}
-
-/*******************************************************************************
-Interrupt handler.
-*******************************************************************************/
-ISR(WDT_vect)
-{
- if (NULL != halWdtCallback)
- halWdtCallback();
- wdt_enable(0);
- for (;;);
-}
-//eof wdt.c