summaryrefslogtreecommitdiff
path: root/keyboards/xd75/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/xd75/readme.md')
-rw-r--r--keyboards/xd75/readme.md34
1 files changed, 26 insertions, 8 deletions
diff --git a/keyboards/xd75/readme.md b/keyboards/xd75/readme.md
index 0bc82be91..28a252332 100644
--- a/keyboards/xd75/readme.md
+++ b/keyboards/xd75/readme.md
@@ -9,22 +9,40 @@ For more info on this firmware (and how to make it your own), head over to [qmk.
## Building
-Download or clone the whole firmware and navigate to the keyboards/xd75 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
+Download or clone the whole firmware and navigate to the
+keyboards/xd75 folder. Once your dev env is setup, you'll be able to
+type `make` to generate your .hex - you can then use the Teensy Loader
+to install the resulting .hex file, or have the `make` process install
+it using DFU.
### Default
-To build with the default keymap, simply run `make default`.
+To build with the default keymap, simply run `make xd75-default`, and
+to install via DFU, `make xd75-default-dfu`.
+
+Note that DFU is likely to require root permissions, so installing the
+firmware likely requires a command line like:
+
+```
+$ sudo make xd75-default-dfu
+```
### Other Keymaps
-The "default" keymap included is basically the OLKB Atomic keymap with a few buttons added for RGB underglow control. This should be usable as a starting point, but most people will be best served creating their own keymap and flashing it - more info on creating your own keymap is available in [the official QMK documentation](https://docs.qmk.fm).
+The "default" keymap included is basically the OLKB Atomic keymap with
+a few buttons added for RGB underglow control. This should be usable
+as a starting point, but most people will be best served creating
+their own keymap and flashing it - more info on creating your own
+keymap is available in [the official QMK
+documentation](https://docs.qmk.fm).
+
+Keymaps follow the format **__\<name\>.c__** and are stored in
+subdirectories under `keyboards/xd75/keymaps`
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+To build the firmware binary hex file for a specific keymap, and
+install it, using DFU, just do `make` with a keymap like this:
```
-$ make [default|jack|<name>]
+$ make xd75-[default|<name>]
```
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.