summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile.hhkb620
-rw-r--r--Makefile.macway (renamed from Makefile)0
-rw-r--r--keymap_hhkb.c133
-rw-r--r--keymap_hhkb.h13
-rw-r--r--matrix_hhkb.c94
-rw-r--r--tmk.c21
-rw-r--r--usb.c2
7 files changed, 874 insertions, 9 deletions
diff --git a/Makefile.hhkb b/Makefile.hhkb
new file mode 100644
index 000000000..fbf7ede2e
--- /dev/null
+++ b/Makefile.hhkb
@@ -0,0 +1,620 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# Target file name (without extension).
+TARGET = tmk_hhkb
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = tmk.c \
+ usb.c \
+ usb_keyboard.c \
+ usb_mouse.c \
+ usb_debug.c \
+ keymap_hhkb.c \
+ matrix_hhkb.c \
+ jump_bootloader.c \
+ print.c
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+#MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+# AVR Studio 4.10 requires dwarf-2.
+# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS =
+
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns: create listing
+# -gstabs: have the assembler create line number information; note that
+# for use in COFF files, additional information about filenames
+# and function names needs to be present in the assembler source
+# files -- see avr-libc docs [FIXME: not yet described there]
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+# -Wl,...: tell GCC to pass this to linker.
+# -Map: create map file
+# --cref: add cross reference to map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = stk500v2
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = com1 # programmer connected to serial device
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+# just set to localhost unless doing some sort of crazy debugging when
+# avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = -------- end --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+ @echo
+ @echo $(MSG_BEGIN)
+
+end:
+ @echo $(MSG_END)
+ @echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+ELFSIZE = $(SIZE) $(TARGET).elf
+
+sizebefore:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+sizeafter:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+ @$(CC) --version
+
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+ $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Generate avr-gdb config/init file which does the following:
+# define the reset signal, load the target file, connect to target, and set
+# a breakpoint at main().
+gdb-config:
+ @$(REMOVE) $(GDBINIT_FILE)
+ @echo define reset >> $(GDBINIT_FILE)
+ @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+ @echo end >> $(GDBINIT_FILE)
+ @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+ @echo load >> $(GDBINIT_FILE)
+endif
+ @echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+ @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+ @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+ $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ @$(WINSHELL) /c pause
+
+else
+ @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+ $(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+ @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+ @echo
+ @echo $(MSG_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+ @echo
+ @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
+
+%.eep: %.elf
+ @echo
+ @echo $(MSG_EEPROM) $@
+ -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+ --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+ @echo
+ @echo $(MSG_EXTENDED_LISTING) $@
+ $(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+ @echo
+ @echo $(MSG_SYMBOL_TABLE) $@
+ $(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+ @echo
+ @echo $(MSG_CREATING_LIBRARY) $@
+ $(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+ @echo
+ @echo $(MSG_LINKING) $@
+ $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+ @echo
+ @echo $(MSG_COMPILING) $<
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+ @echo
+ @echo $(MSG_COMPILING_CPP) $<
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+ $(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+ $(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+ @echo
+ @echo $(MSG_ASSEMBLING) $<
+ $(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+ @echo
+ @echo $(MSG_CLEANING)
+ $(REMOVE) $(TARGET).hex
+ $(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET).cof
+ $(REMOVE) $(TARGET).elf
+ $(REMOVE) $(TARGET).map
+ $(REMOVE) $(TARGET).sym
+ $(REMOVE) $(TARGET).lss
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+ $(REMOVE) $(SRC:.c=.s)
+ $(REMOVE) $(SRC:.c=.d)
+ $(REMOVE) $(SRC:.c=.i)
+ $(REMOVEDIR) .dep
+
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/Makefile b/Makefile.macway
index d259fd2db..d259fd2db 100644
--- a/Makefile
+++ b/Makefile.macway
diff --git a/keymap_hhkb.c b/keymap_hhkb.c
new file mode 100644
index 000000000..2024fe56c
--- /dev/null
+++ b/keymap_hhkb.c
@@ -0,0 +1,133 @@
+/*
+ * keymap for modified macway keyboarq
+ */
+#include <avr/pgmspace.h>
+#include "matrix.h"
+#include "keymap_hhkb.h"
+
+int current_layer = 0;
+
+/*
+ * Layer0(Default Layer)
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
+ * |-----------------------------------------------------------|
+ * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Return |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Fn2 |Fn1|
+ * `-----------------------------------------------------------'
+ * |Gui|Alt |Space |Fn3 |Gui|
+ * `-------------------------------------------'
+ *
+ * Layer1(Fn1) HHKB mode
+ * ,-----------------------------------------------------------.
+ * |Pow| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
+ * |-----------------------------------------------------------|
+ * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | | +| -|End|PgD|Dow|Shift | |
+ * `-----------------------------------------------------------'
+ * |Gui |Alt |Space |Alt |Gui|
+ * `--------------------------------------------'
+ *
+ * Layer2(Fn2) HHKB mouse mode
+ * ,-----------------------------------------------------------.
+ * |Esc| | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * |Tab | | | | | | | | | | |McU| |Backs|
+ * |-----------------------------------------------------------|
+ * |Contro| | | | | | | |MwL|MwU|McL|McR|Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | | | |MwR|MwD|McD| | |
+ * `-----------------------------------------------------------'
+ * |Gui |Alt |Space |Mb1 |Mb2|
+ * `--------------------------------------------'
+ *
+ * Layer3(Fn3) vi mode
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | |
+ * |-----------------------------------------------------------|
+ * |Tab | | | | | |Hom|PgD|PgUlEnd| |MwD|MwU| |
+ * |-----------------------------------------------------------|
+ * |Contro| | | | | |Lef|Dow|Up |Rig| | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | |Mb2|McL|McD|McU|McR|Mb1|Mb1 | |
+ * `-----------------------------------------------------------'
+ * |Gui|Alt |Space | |Mb2|
+ * `-------------------------------------------'
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+ */
+static const uint8_t PROGMEM Keymap[][MATRIX_ROWS][MATRIX_COLS] = {
+ // 0: default
+ {
+ { KB_2, KB_Q, KB_W, KB_S, KB_A, KB_Z, KB_X, KB_C },
+ { KB_3, KB_4, KB_R, KB_E, KB_D, KB_F, KB_V, KB_B },
+ { KB_5, KB_6, KB_Y, KB_T, KB_G, KB_H, KB_N, KB_NO },
+ { KB_1, KB_ESCAPE, KB_TAB, KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
+ { KB_7, KB_8, KB_U, KB_I, KB_K, KB_J, KB_M, KB_NO },
+ { KB_BSLASH, KB_GRAVE, KB_BSPACE, KB_ENTER, FN_1, FN_2, KB_RGUI, FN_3 },
+ { KB_9, KB_0, KB_O, KB_P, KB_SCOLON, KB_L, KB_COMMA, KB_NO },
+ { KB_MINUS, KB_EQUAL, KB_RBRACKET,KB_LBRACKET,KB_QUOTE, KB_SLASH, KB_DOT, KB_NO },
+ },
+ // 1: FN_1(HHKB Fn) HHKB mode
+ {
+ { KB_F2, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, },
+ { KB_F3, KB_F4, KB_NO, KB_NO, KB_MUTE, KB_F20, KB_NO, KB_NO, },
+ { KB_F5, KB_F6, KB_NO, KB_NO, KB_NO, KP_ASTERISK,KP_PLUS, KB_NO },
+ { KB_F1, KB_POWER, KB_CAPSLOCK,KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
+ { KB_F7, KB_F8, KB_NO, KB_PSCREEN, KB_HOME, KP_SLASH, KB_MINUS, KB_NO },
+ { KB_INSERT, KB_DELETE, KB_BSPACE, KP_ENTER, KB_NO, KB_RSHIFT, KB_RGUI, KB_RALT },
+ { KB_F9, KB_F10, KB_SCKLOCK, KB_BREAK, KB_LEFT, KB_PGUP, KB_END, KB_NO },
+ { KB_F11, KB_F12, KB_NO, KB_UP, KB_RIGHT, KB_DOWN, KB_PGDOWN, KB_NO },
+ },
+ // 2: FN_2(Right Shift) HHKB mouse mode
+ {
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, },
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_MUTE, KB_NO, KB_NO, KB_NO, },
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO },
+ { KB_NO, KB_ESCAPE, KB_TAB, KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
+ { KB_NO, KB_NO, KB_NO, KB_NO, MS_WH_LEFT, KP_SLASH, KB_MINUS, KB_NO },
+ { KB_NO, KB_NO, KB_BSPACE, KB_ENTER, KB_NO, KB_NO, MS_BTN2, MS_BTN1 },
+ { KB_NO, KB_NO, KB_NO, KB_NO, MS_LEFT, MS_WH_DOWN, MS_WH_RIGHT,KB_NO },
+ { KB_NO, KB_NO, KB_NO, MS_UP, MS_RIGHT, MS_DOWN, MS_WH_UP, KB_NO },
+ },
+ // 3: FN_3(Right Alt) vi mode
+ {
+ { KB_F2, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, },
+ { KB_F3, KB_F4, KB_NO, KB_NO, KB_NO, KB_F20, KB_NO, KB_NO, },
+ { KB_F5, KB_F6, KB_HOME, KB_NO, KB_NO, KB_LEFT, MS_LEFT, KB_NO },
+ { KB_F1, KB_ESCAPE, KB_TAB, KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
+ { KB_F7, KB_F8, KB_PGDOWN, KB_PGUP, KB_UP, KB_DOWN, MS_DOWN, KB_NO },
+ { KB_INSERT, KB_NO, KB_BSPACE, KB_ENTER, KB_NO, MS_BTN1, MS_BTN2, KB_NO },
+ { KB_F9, KB_F10, KB_END, KB_NO, KB_NO, KB_RIGHT, MS_UP, KB_NO },
+ { KB_F11, KB_F12, MS_WH_DOWN, MS_WH_UP, KB_NO, MS_BTN1, MS_RIGHT, KB_NO },
+ },
+};
+
+
+uint8_t get_keycode(int layer, int row, int col)
+{
+ if (row >= MATRIX_ROWS)
+ return KB_NO;
+ if (col >= MATRIX_COLS)
+ return KB_NO;
+ return pgm_read_byte(&Keymap[layer][row][col]);
+}
+
+int get_layer(void) {
+ int layer = 0;
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ for (int col = 0; col < MATRIX_ROWS; col++) {
+ if (matrix[row] & 1<<col) continue;
+ if (get_keycode(0, row, col) == FN_1) layer = ((layer == 0 || layer > 1) ? 1 : layer);
+ if (get_keycode(0, row, col) == FN_2) layer = ((layer == 0 || layer > 2) ? 2 : layer);
+ if (get_keycode(0, row, col) == FN_3) layer = ((layer == 0 || layer > 3) ? 3 : layer);
+ }
+ }
+ current_layer = layer;
+ return current_layer;
+}
diff --git a/keymap_hhkb.h b/keymap_hhkb.h
new file mode 100644
index 000000000..d2af65e96
--- /dev/null
+++ b/keymap_hhkb.h
@@ -0,0 +1,13 @@
+#ifndef KEYMAP_H
+#define KEYMAP_H 1
+
+#include <stdint.h>
+#include "usb_keycodes.h"
+
+int get_layer(void);
+uint8_t get_keycode(int layer, int row, int col);
+
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+#endif
diff --git a/matrix_hhkb.c b/matrix_hhkb.c
new file mode 100644
index 000000000..ff5b71610
--- /dev/null
+++ b/matrix_hhkb.c
@@ -0,0 +1,94 @@
+/*
+ * scan matrix
+ */
+#include <avr/io.h>
+#include <util/delay.h>
+#include "keymap.h"
+#include "matrix.h"
+#include "print.h"
+
+// matrix is active low. (key on: 0/key off: 1)
+//
+// HHKB has no ghost and no bounce.
+// row: HC4051 select input channel(0-8)
+// PB0, PB1, PB2(A, B, C)
+// col: LS145 select low output line(0-8)
+// PB3, PB4, PB5, PB6(A, B, C, D)
+// use D as ENABLE: (enable: 0/unenable: 1)
+// key: KEY: (on: 0/ off:1)
+// UNKNOWN: unknown whether input or output
+// PE6,PE7(KEY, UNKNOWN)
+#define COL_ENABLE (1<<6)
+#define KEY_SELELCT(ROW, COL) (PORTB = COL_ENABLE|(((COL)&0x07)<<3)|((ROW)&0x07))
+#define KEY_ENABLE (PORTB &= ~COL_ENABLE)
+#define KEY_UNABLE (PORTB |= COL_ENABLE)
+#define KEY_ON ((PINE&(1<<6)) ? false : true)
+
+// matrix state buffer
+uint8_t *matrix;
+uint8_t *matrix_prev;
+static uint8_t _matrix0[MATRIX_ROWS];
+static uint8_t _matrix1[MATRIX_ROWS];
+
+
+// this must be called once before matrix_scan.
+void matrix_init(void)
+{
+ // row & col output(PB0-6)
+ DDRB = 0xFF;
+ PORTB = KEY_SELELCT(0, 0);
+ // key input(KEY/VALID)
+ DDRE = 0x3F;
+ PORTE = 0x00;
+
+ // initialize matrix state: all keys off
+ for (int i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0xFF;
+ for (int i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0xFF;
+ matrix = _matrix0;
+ matrix_prev = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+ uint8_t state;
+ uint8_t *tmp;
+
+ tmp = matrix_prev;
+ matrix_prev = matrix;
+ matrix = tmp;
+
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ for (int col = 0; col < MATRIX_COLS; col++) {
+//print("scan: "); phex(row); phex(col); print("\n");
+ KEY_SELELCT(row, col);
+ _delay_us(50); // from logic analyzer chart
+ KEY_ENABLE;
+ _delay_us(10); // from logic analyzer chart
+//print("PINE: "); phex(PINE); print("\n");
+ if (KEY_ON) {
+ matrix[row] &= ~(1<<col);
+ } else {
+ matrix[row] |= (1<<col);
+ }
+ KEY_UNABLE;
+ _delay_us(150); // from logic analyzer chart
+ }
+ }
+ return 1;
+}
+
+bool matrix_is_modified(void) {
+ for (int i=0; i <MATRIX_ROWS; i++) {
+ if (matrix[i] != matrix_prev[i])
+ return true;
+ }
+ return false;
+}
+
+bool matrix_has_ghost(void) {
+ return false;
+}
+
+bool matrix_has_ghost_in_row(uint8_t row) {
+ return false;
+}
diff --git a/tmk.c b/tmk.c
index 52d06d60e..797acd924 100644
--- a/tmk.c
+++ b/tmk.c
@@ -34,7 +34,7 @@
#include "usb_mouse.h"
#include "print.h"
#include "matrix.h"
-#include "keymap.h"
+#include "keymap_hhkb.h"
#include "jump_bootloader.h"
@@ -46,7 +46,7 @@
#define MOUSE_MOVE_UNIT 10
#define MOUSE_DELAY_MS 200
-#define MOUSE_DELAY_ACC 4
+#define MOUSE_DELAY_ACC 5
static void print_matrix(void);
@@ -99,7 +99,7 @@ int main(void)
int8_t mouse_hwheel = 0;
int mouse_repeat = 0;
- print("\nt.m.k. keyboard 1.0\n");
+ print("\nt.m.k. keyboard 1.0 for hhkb\n");
while (1) {
matrix_scan();
modified = matrix_is_modified();
@@ -110,12 +110,13 @@ int main(void)
if (modified) {
print_matrix();
+ // LED flash for debug
LED_CONFIG;
LED_ON;
}
keyboard_modifier_keys = 0;
- for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
+ for (int i = 0; i < 3; i++) keyboard_keys[i] = KB_NO;
key_index = 0;
mouse_x = 0;
mouse_y = 0;
@@ -136,10 +137,10 @@ int main(void)
keyboard_modifier_keys |= 1<<(code & 0x07);
} else if (code >= MS_UP) {
// mouse
- if (code == MS_UP) mouse_y -= MOUSE_MOVE_UNIT;
- if (code == MS_DOWN) mouse_y += MOUSE_MOVE_UNIT;
- if (code == MS_LEFT) mouse_x -= MOUSE_MOVE_UNIT;
- if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT;
+ if (code == MS_UP) mouse_y -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+ if (code == MS_DOWN) mouse_y += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+ if (code == MS_LEFT) mouse_x -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+ if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
if (code == MS_BTN1) mouse_btn |= 1<<0;
if (code == MS_BTN2) mouse_btn |= 1<<1;
if (code == MS_BTN3) mouse_btn |= 1<<2;
@@ -189,6 +190,10 @@ int main(void)
//Rollover
}
usb_keyboard_send();
+
+ // LED flash for debug
+ LED_CONFIG;
+ LED_OFF;
}
}
_delay_ms(2);
diff --git a/usb.c b/usb.c
index 879c2becc..347ed5700 100644
--- a/usb.c
+++ b/usb.c
@@ -47,7 +47,7 @@
// INF file is needed to load the driver. These numbers need to
// match the INF file.
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xBABE
+#define PRODUCT_ID 0xCAFE
// USB devices are supposed to implment a halt feature, which is