aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/stm32-h103/usart/usart.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/stm32/f1/stm32-h103/usart/usart.c')
-rw-r--r--examples/stm32/f1/stm32-h103/usart/usart.c18
1 files changed, 11 insertions, 7 deletions
diff --git a/examples/stm32/f1/stm32-h103/usart/usart.c b/examples/stm32/f1/stm32-h103/usart/usart.c
index a221acb..9c39dc1 100644
--- a/examples/stm32/f1/stm32-h103/usart/usart.c
+++ b/examples/stm32/f1/stm32-h103/usart/usart.c
@@ -26,18 +26,22 @@ void clock_setup(void)
rcc_clock_setup_in_hse_8mhz_out_72mhz();
/* Enable GPIOC clock. */
- rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_IOPCEN);
+ rcc_peripheral_enable_clock(&RCC_APB2ENR,
+ RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |
+ RCC_APB2ENR_IOPCEN);
/* Enable clocks for GPIO port B (for GPIO_USART3_TX) and USART3. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN);
- rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN | RCC_APB1ENR_USART3EN);
+ rcc_peripheral_enable_clock(&RCC_APB1ENR,
+ RCC_APB1ENR_USART2EN |
+ RCC_APB1ENR_USART3EN);
}
void usart_setup(void)
{
/* Setup GPIO pin GPIO_USART1_TX. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
- GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_TX);
+ GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART1, 38400, rcc_ppre2_frequency);
@@ -52,7 +56,7 @@ void usart_setup(void)
/* Setup GPIO pin GPIO_USART2_TX. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
- GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
+ GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 38400, rcc_ppre1_frequency);
@@ -67,7 +71,7 @@ void usart_setup(void)
/* Setup GPIO pin GPIO_USART3_TX/GPIO10 on GPIO port B for transmit. */
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
- GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART3_TX);
+ GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART3_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART3, 38400, rcc_ppre1_frequency);
@@ -98,7 +102,7 @@ int main(void)
/* Blink the LED (PC12) on the board with every transmitted byte. */
while (1) {
- gpio_toggle(GPIOC, GPIO12); /* LED on/off */
+ gpio_toggle(GPIOC, GPIO12); /* LED on/off */
usart_send_blocking(USART1, c + '0'); /* USART1: Send byte. */
usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
usart_send_blocking(USART3, c + '0'); /* USART3: Send byte. */
@@ -112,7 +116,7 @@ int main(void)
usart_send_blocking(USART3, '\n');
}
for (i = 0; i < 800000; i++) /* Wait a bit. */
- __asm__("NOP");
+ __asm__("nop");
}
return 0;