aboutsummaryrefslogtreecommitdiff
path: root/hardware/contrib/richardeoin/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'hardware/contrib/richardeoin/README.md')
-rw-r--r--hardware/contrib/richardeoin/README.md71
1 files changed, 0 insertions, 71 deletions
diff --git a/hardware/contrib/richardeoin/README.md b/hardware/contrib/richardeoin/README.md
deleted file mode 100644
index d4547dc..0000000
--- a/hardware/contrib/richardeoin/README.md
+++ /dev/null
@@ -1,71 +0,0 @@
-This variant attempts to be as faithful to the Blackmagic mini as
-possible, but also has several differences. This board has been built
-and functions.
-
-![Blackmagic richardeoin PCB](blackmagic_richardeoin_board.png
- "Blackmagic richardeoin PCB")
-![Blackmagic richardeoin Assembled](blackmagic_richardeoin_assembled.JPG
- "Blackmagic richardeoin Assembled")
-
-## Details
-
-* The schematic and board have both been designed using Cadsoft EAGLE
- v6.4.0.
-
-* The board size is 40mm x 16mm.
-
-* The programming connector is an ARM 10-PIN Interface as described
- [here](http://www.keil.com/support/man/docs/ulink2/ulink2_hw_connectors.htm).
-
-## Differences
-
-### Uses 0603 [1608 Metric] components
-
-The layout is intended for reflow soldering.
-
-### Includes Level Translator
-
-This board incorporates the same level translator used in the
-full-sized Blackmagic, so it can be used to safely program 2.7V or
-1.8V systems.
-
-### USART Connector
-
-The STM32F103's USART1 peripheral is broken out into a 0.1"
-header. The hole centres are
-[slightly offset to allow a press-fit](https://www.sparkfun.com/tutorials/114).
-
-### BOOT0 Button
-
-As well as the standard button for entering USB DFU mode, this variant
-also provides a button for pulling the BOOT0 pin high to activate the
-STM32 SystemMemory bootloader. Hold this button when plugging in the
-module to enter then bootloader mode. Then
-[scripts/bootprog.py](scripts/bootprog.py) can be used to program and
-reprogram the chip over the USART1 interface.
-
-This is useful for programming a brand new or 'bricked' blackmagic
-with the DFU firmware (src/blackmagic_dfu.bin), the standard DFU mode
-should be used for regular firmware updates.
-
-## Parts and Costings
-
-* [Parts List](Parts.md)
-
-Parts Cost (Approximate): £14 + VAT
-([uk.farnell.com](http://uk.farnell.com) August 2013)
-
-Programming Cable: £8.49 + VAT
-([uk.farnell.com](http://uk.farnell.com/samtec/ffsd-05-d-06-00-01-n/ribbon-cable-idc-152-4mm-grey-10way/dp/1667659)
-August 2013)
-
-## Assembly Photos
-
-### Blank PCB:
-
-![PCB Front Side](blackmagic_richardeoin_pcb_front.JPG "PCB Front Side")
-![PCB Reverse Side](blackmagic_richardeoin_pcb_reverse.JPG "PCB Reverse Side")
-
-### Solder Paste Stencil:
-
-![PCB Stencil](blackmagic_richardeoin_stencil.JPG "PCB Stencil")