From db32864ce7029d758f57729cc2f75e051a28d0a2 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 18 Jun 2016 14:30:24 -0400 Subject: Cleans up quantum/keymap situation, removes extra lufa folders (#416) * sorts out keycodes * move midi around * remove mbed * replaces keymap with qmk/keymap_common * fixes keymap.h * keymap, config, quantum rearrange * removes unneeded lufa stuff --- .../lufa/LUFA-git/Projects/Magstripe/Magstripe.txt | 163 --------------------- 1 file changed, 163 deletions(-) delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt (limited to 'tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt') diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt deleted file mode 100644 index a11dfaf80..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt +++ /dev/null @@ -1,163 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li AT90USB1287 - * \li AT90USB1286 - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Human Interface Device (HID)
USB Subclass:Keyboard
Relevant Standards:USBIF HID Standard, USBIF HID Usage Tables
Supported USB Speeds:Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card - * reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed - * to be used with the open source Stripe Snoop project at http://stripesnoop.sourceforge.net/. - * - * See http://ossguy.com/ss_usb/ for the USB reader hardware project website, - * including construction and support details. - * - * To use, connect your magnetic card reader device to the USB AVR as follows (pin and port mapping may be adjusted - * from the project makefile): - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Signal:AVR Port:
Track 1 DataPORTC, Pin 1
Track 1 ClockPORTC, Pin 2
Track 2 DataPORTC, Pin 3
Track 2 ClockPORTC, Pin 0
Track 3 DataPORTC, Pin 5
Track 3 ClockPORTC, Pin 6
Card DetectPORTC, Pin 4
- * - * This project is based on the LUFA Keyboard project demonstration application, written by Denver Gingerich. - * - * This application uses a keyboard HID driver to communicate the data collected a TTL magnetic stripe reader - * to the connected computer. The raw bitstream obtained from the magnetic stripe reader is "typed" through - * the keyboard driver as 0's and 1's. After every card swipe, the project will send a return key. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
MAX_BITSCircularBitBuffer.hGives the maximum number of bits per track which can be buffered by the device for later transmission to a host.
MAG_T1_CLOCKAppConfig.hMask for the magnetic card reader's CLOCK line for the reader's track 1 output.
MAG_T1_DATAAppConfig.hMask for the magnetic card reader's DATA line for the reader's track 1 output.
MAG_T2_CLOCKAppConfig.hMask for the magnetic card reader's CLOCK line for the reader's track 2 output.
MAG_T2_DATAAppConfig.hMask for the magnetic card reader's DATA line for the reader's track 2 output.
MAG_T3_CLOCKAppConfig.hMask for the magnetic card reader's CLOCK line for the reader's track 3 output.
MAG_T3_DATAAppConfig.hMask for the magnetic card reader's DATA line for the reader's track 3 output.
MAG_CARDPRESENTAppConfig.hMask for the magnetic card reader's card detection output.
MAG_PINAppConfig.hPIN register that the magnetic card reader device is attached to.
MAG_PORTAppConfig.hPORT register that the magnetic card reader device is attached to.
MAG_DDRAppConfig.hDDR register that the magnetic card reader device is attached to.
- */ - -- cgit v1.2.3