From 39ece819791eed7f57e0a0492c1aa774be5c4b24 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 7 Jul 2017 11:56:01 -0400 Subject: delete old lufa --- .../Bootloaders/MassStorage/Lib/VirtualFAT.c | 482 --------------------- 1 file changed, 482 deletions(-) delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c (limited to 'tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c') diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c deleted file mode 100644 index 907b4e5ff..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c +++ /dev/null @@ -1,482 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Virtualized FAT12 filesystem implementation, to perform self-programming - * in response to read and write requests to the virtual filesystem by the - * host PC. - */ - -#define INCLUDE_FROM_VIRTUAL_FAT_C -#include "VirtualFAT.h" - -/** FAT filesystem boot sector block, must be the first sector on the physical - * disk so that the host can identify the presence of a FAT filesystem. This - * block is truncated; normally a large bootstrap section is located near the - * end of the block for booting purposes however as this is not meant to be a - * bootable disk it is omitted for space reasons. - * - * \note When returning the boot block to the host, the magic signature 0xAA55 - * must be added to the very end of the block to identify it as a boot - * block. - */ -static const FATBootBlock_t BootBlock = - { - .Bootstrap = {0xEB, 0x3C, 0x90}, - .Description = "mkdosfs", - .SectorSize = SECTOR_SIZE_BYTES, - .SectorsPerCluster = SECTOR_PER_CLUSTER, - .ReservedSectors = 1, - .FATCopies = 2, - .RootDirectoryEntries = (SECTOR_SIZE_BYTES / sizeof(FATDirectoryEntry_t)), - .TotalSectors16 = LUN_MEDIA_BLOCKS, - .MediaDescriptor = 0xF8, - .SectorsPerFAT = 1, - .SectorsPerTrack = (LUN_MEDIA_BLOCKS % 64), - .Heads = (LUN_MEDIA_BLOCKS / 64), - .HiddenSectors = 0, - .TotalSectors32 = 0, - .PhysicalDriveNum = 0, - .ExtendedBootRecordSig = 0x29, - .VolumeSerialNumber = 0x12345678, - .VolumeLabel = "LUFA BOOT ", - .FilesystemIdentifier = "FAT12 ", - }; - -/** FAT 8.3 style directory entry, for the virtual FLASH contents file. */ -static FATDirectoryEntry_t FirmwareFileEntries[] = - { - /* Root volume label entry; disk label is contained in the Filename and - * Extension fields (concatenated) with a special attribute flag - other - * fields are ignored. Should be the same as the label in the boot block. - */ - [DISK_FILE_ENTRY_VolumeID] = - { - .MSDOS_Directory = - { - .Name = "LUFA BOOT ", - .Attributes = FAT_FLAG_VOLUME_NAME, - .Reserved = {0}, - .CreationTime = 0, - .CreationDate = 0, - .StartingCluster = 0, - .Reserved2 = 0, - } - }, - - /* VFAT Long File Name entry for the virtual firmware file; required to - * prevent corruption from systems that are unable to detect the device - * as being a legacy MSDOS style FAT12 volume. */ - [DISK_FILE_ENTRY_FLASH_LFN] = - { - .VFAT_LongFileName = - { - .Ordinal = 1 | FAT_ORDINAL_LAST_ENTRY, - .Attribute = FAT_FLAG_LONG_FILE_NAME, - .Reserved1 = 0, - .Reserved2 = 0, - - .Checksum = FAT_CHECKSUM('F','L','A','S','H',' ',' ',' ','B','I','N'), - - .Unicode1 = 'F', - .Unicode2 = 'L', - .Unicode3 = 'A', - .Unicode4 = 'S', - .Unicode5 = 'H', - .Unicode6 = '.', - .Unicode7 = 'B', - .Unicode8 = 'I', - .Unicode9 = 'N', - .Unicode10 = 0, - .Unicode11 = 0, - .Unicode12 = 0, - .Unicode13 = 0, - } - }, - - /* MSDOS file entry for the virtual Firmware image. */ - [DISK_FILE_ENTRY_FLASH_MSDOS] = - { - .MSDOS_File = - { - .Filename = "FLASH ", - .Extension = "BIN", - .Attributes = 0, - .Reserved = {0}, - .CreationTime = FAT_TIME(1, 1, 0), - .CreationDate = FAT_DATE(14, 2, 1989), - .StartingCluster = 2, - .FileSizeBytes = FLASH_FILE_SIZE_BYTES, - } - }, - - [DISK_FILE_ENTRY_EEPROM_LFN] = - { - .VFAT_LongFileName = - { - .Ordinal = 1 | FAT_ORDINAL_LAST_ENTRY, - .Attribute = FAT_FLAG_LONG_FILE_NAME, - .Reserved1 = 0, - .Reserved2 = 0, - - .Checksum = FAT_CHECKSUM('E','E','P','R','O','M',' ',' ','B','I','N'), - - .Unicode1 = 'E', - .Unicode2 = 'E', - .Unicode3 = 'P', - .Unicode4 = 'R', - .Unicode5 = 'O', - .Unicode6 = 'M', - .Unicode7 = '.', - .Unicode8 = 'B', - .Unicode9 = 'I', - .Unicode10 = 'N', - .Unicode11 = 0, - .Unicode12 = 0, - .Unicode13 = 0, - } - }, - - [DISK_FILE_ENTRY_EEPROM_MSDOS] = - { - .MSDOS_File = - { - .Filename = "EEPROM ", - .Extension = "BIN", - .Attributes = 0, - .Reserved = {0}, - .CreationTime = FAT_TIME(1, 1, 0), - .CreationDate = FAT_DATE(14, 2, 1989), - .StartingCluster = 2 + FILE_CLUSTERS(FLASH_FILE_SIZE_BYTES), - .FileSizeBytes = EEPROM_FILE_SIZE_BYTES, - } - }, - }; - -/** Starting cluster of the virtual FLASH.BIN file on disk, tracked so that the - * offset from the start of the data sector can be determined. On Windows - * systems files are usually replaced using the original file's disk clusters, - * while Linux appears to overwrite with an offset which must be compensated for. - */ -static const uint16_t* FLASHFileStartCluster = &FirmwareFileEntries[DISK_FILE_ENTRY_FLASH_MSDOS].MSDOS_File.StartingCluster; - -/** Starting cluster of the virtual EEPROM.BIN file on disk, tracked so that the - * offset from the start of the data sector can be determined. On Windows - * systems files are usually replaced using the original file's disk clusters, - * while Linux appears to overwrite with an offset which must be compensated for. - */ -static const uint16_t* EEPROMFileStartCluster = &FirmwareFileEntries[DISK_FILE_ENTRY_EEPROM_MSDOS].MSDOS_File.StartingCluster; - -/** Reads a byte of EEPROM out from the EEPROM memory space. - * - * \note This function is required as the avr-libc EEPROM functions do not cope - * with linker relaxations, and a jump longer than 4K of FLASH on the - * larger USB AVRs will break the linker. This function is marked as - * never inlinable and placed into the normal text segment so that the - * call to the EEPROM function will be short even if the AUX boot section - * is used. - * - * \param[in] Address Address of the EEPROM location to read from - * - * \return Read byte of EEPROM data. - */ -static uint8_t ReadEEPROMByte(const uint8_t* const Address) -{ - return eeprom_read_byte(Address); -} - -/** Writes a byte of EEPROM out to the EEPROM memory space. - * - * \note This function is required as the avr-libc EEPROM functions do not cope - * with linker relaxations, and a jump longer than 4K of FLASH on the - * larger USB AVRs will break the linker. This function is marked as - * never inlinable and placed into the normal text segment so that the - * call to the EEPROM function will be short even if the AUX boot section - * is used. - * - * \param[in] Address Address of the EEPROM location to write to - * \param[in] Data New data to write to the EEPROM location - */ -static void WriteEEPROMByte(uint8_t* const Address, - const uint8_t Data) -{ - eeprom_update_byte(Address, Data); -} - -/** Updates a FAT12 cluster entry in the FAT file table with the specified next - * chain index. If the cluster is the last in the file chain, the magic value - * \c 0xFFF should be used. - * - * \note FAT data cluster indexes are offset by 2, so that cluster 2 is the - * first file data cluster on the disk. See the FAT specification. - * - * \param[out] FATTable Pointer to the FAT12 allocation table - * \param[in] Index Index of the cluster entry to update - * \param[in] ChainEntry Next cluster index in the file chain - */ -static void UpdateFAT12ClusterEntry(uint8_t* const FATTable, - const uint16_t Index, - const uint16_t ChainEntry) -{ - /* Calculate the starting offset of the cluster entry in the FAT12 table */ - uint8_t FATOffset = (Index + (Index >> 1)); - bool UpperNibble = ((Index & 1) != 0); - - /* Check if the start of the entry is at an upper nibble of the byte, fill - * out FAT12 entry as required */ - if (UpperNibble) - { - FATTable[FATOffset] = (FATTable[FATOffset] & 0x0F) | ((ChainEntry & 0x0F) << 4); - FATTable[FATOffset + 1] = (ChainEntry >> 4); - } - else - { - FATTable[FATOffset] = ChainEntry; - FATTable[FATOffset + 1] = (FATTable[FATOffset] & 0xF0) | (ChainEntry >> 8); - } -} - -/** Updates a FAT12 cluster chain in the FAT file table with a linear chain of - * the specified length. - * - * \note FAT data cluster indexes are offset by 2, so that cluster 2 is the - * first file data cluster on the disk. See the FAT specification. - * - * \param[out] FATTable Pointer to the FAT12 allocation table - * \param[in] Index Index of the start of the cluster chain to update - * \param[in] ChainLength Length of the chain to write, in clusters - */ -static void UpdateFAT12ClusterChain(uint8_t* const FATTable, - const uint16_t Index, - const uint8_t ChainLength) -{ - for (uint8_t i = 0; i < ChainLength; i++) - { - uint16_t CurrentCluster = Index + i; - uint16_t NextCluster = CurrentCluster + 1; - - /* Mark last cluster as end of file */ - if (i == (ChainLength - 1)) - NextCluster = 0xFFF; - - UpdateFAT12ClusterEntry(FATTable, CurrentCluster, NextCluster); - } -} - -/** Reads or writes a block of data from/to the physical device FLASH using a - * block buffer stored in RAM, if the requested block is within the virtual - * firmware file's sector ranges in the emulated FAT file system. - * - * \param[in] BlockNumber Physical disk block to read from/write to - * \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM - * \param[in] Read If \c true, the requested block is read, if - * \c false, the requested block is written - */ -static void ReadWriteFLASHFileBlock(const uint16_t BlockNumber, - uint8_t* BlockBuffer, - const bool Read) -{ - uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock + (*FLASHFileStartCluster - 2) * SECTOR_PER_CLUSTER; - uint16_t FileEndBlock = FileStartBlock + (FILE_SECTORS(FLASH_FILE_SIZE_BYTES) - 1); - - /* Range check the write request - abort if requested block is not within the - * virtual firmware file sector range */ - if (!((BlockNumber >= FileStartBlock) && (BlockNumber <= FileEndBlock))) - return; - - #if (FLASHEND > 0xFFFF) - uint32_t FlashAddress = (uint32_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; - #else - uint16_t FlashAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; - #endif - - if (Read) - { - /* Read out the mapped block of data from the device's FLASH */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) - { - #if (FLASHEND > 0xFFFF) - BlockBuffer[i] = pgm_read_byte_far(FlashAddress++); - #else - BlockBuffer[i] = pgm_read_byte(FlashAddress++); - #endif - } - } - else - { - /* Write out the mapped block of data to the device's FLASH */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i += 2) - { - if ((FlashAddress % SPM_PAGESIZE) == 0) - { - /* Erase the given FLASH page, ready to be programmed */ - BootloaderAPI_ErasePage(FlashAddress); - } - - /* Write the next data word to the FLASH page */ - BootloaderAPI_FillWord(FlashAddress, (BlockBuffer[i + 1] << 8) | BlockBuffer[i]); - FlashAddress += 2; - - if ((FlashAddress % SPM_PAGESIZE) == 0) - { - /* Write the filled FLASH page to memory */ - BootloaderAPI_WritePage(FlashAddress - SPM_PAGESIZE); - } - } - } -} - -/** Reads or writes a block of data from/to the physical device EEPROM using a - * block buffer stored in RAM, if the requested block is within the virtual - * firmware file's sector ranges in the emulated FAT file system. - * - * \param[in] BlockNumber Physical disk block to read from/write to - * \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM - * \param[in] Read If \c true, the requested block is read, if - * \c false, the requested block is written - */ -static void ReadWriteEEPROMFileBlock(const uint16_t BlockNumber, - uint8_t* BlockBuffer, - const bool Read) -{ - uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock + (*EEPROMFileStartCluster - 2) * SECTOR_PER_CLUSTER; - uint16_t FileEndBlock = FileStartBlock + (FILE_SECTORS(EEPROM_FILE_SIZE_BYTES) - 1); - - /* Range check the write request - abort if requested block is not within the - * virtual firmware file sector range */ - if (!((BlockNumber >= FileStartBlock) && (BlockNumber <= FileEndBlock))) - return; - - uint16_t EEPROMAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; - - if (Read) - { - /* Read out the mapped block of data from the device's EEPROM */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) - BlockBuffer[i] = ReadEEPROMByte((uint8_t*)EEPROMAddress++); - } - else - { - /* Write out the mapped block of data to the device's EEPROM */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) - WriteEEPROMByte((uint8_t*)EEPROMAddress++, BlockBuffer[i]); - } -} - -/** Writes a block of data to the virtual FAT filesystem, from the USB Mass - * Storage interface. - * - * \param[in] BlockNumber Index of the block to write. - */ -void VirtualFAT_WriteBlock(const uint16_t BlockNumber) -{ - uint8_t BlockBuffer[SECTOR_SIZE_BYTES]; - - /* Buffer the entire block to be written from the host */ - Endpoint_Read_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); - Endpoint_ClearOUT(); - - switch (BlockNumber) - { - case DISK_BLOCK_BootBlock: - case DISK_BLOCK_FATBlock1: - case DISK_BLOCK_FATBlock2: - /* Ignore writes to the boot and FAT blocks */ - - break; - - case DISK_BLOCK_RootFilesBlock: - /* Copy over the updated directory entries */ - memcpy(FirmwareFileEntries, BlockBuffer, sizeof(FirmwareFileEntries)); - - break; - - default: - ReadWriteFLASHFileBlock(BlockNumber, BlockBuffer, false); - ReadWriteEEPROMFileBlock(BlockNumber, BlockBuffer, false); - - break; - } -} - -/** Reads a block of data from the virtual FAT filesystem, and sends it to the - * host via the USB Mass Storage interface. - * - * \param[in] BlockNumber Index of the block to read. - */ -void VirtualFAT_ReadBlock(const uint16_t BlockNumber) -{ - uint8_t BlockBuffer[SECTOR_SIZE_BYTES]; - memset(BlockBuffer, 0x00, sizeof(BlockBuffer)); - - switch (BlockNumber) - { - case DISK_BLOCK_BootBlock: - memcpy(BlockBuffer, &BootBlock, sizeof(FATBootBlock_t)); - - /* Add the magic signature to the end of the block */ - BlockBuffer[SECTOR_SIZE_BYTES - 2] = 0x55; - BlockBuffer[SECTOR_SIZE_BYTES - 1] = 0xAA; - - break; - - case DISK_BLOCK_FATBlock1: - case DISK_BLOCK_FATBlock2: - /* Cluster 0: Media type/Reserved */ - UpdateFAT12ClusterEntry(BlockBuffer, 0, 0xF00 | BootBlock.MediaDescriptor); - - /* Cluster 1: Reserved */ - UpdateFAT12ClusterEntry(BlockBuffer, 1, 0xFFF); - - /* Cluster 2 onwards: Cluster chain of FLASH.BIN */ - UpdateFAT12ClusterChain(BlockBuffer, *FLASHFileStartCluster, FILE_CLUSTERS(FLASH_FILE_SIZE_BYTES)); - - /* Cluster 2+n onwards: Cluster chain of EEPROM.BIN */ - UpdateFAT12ClusterChain(BlockBuffer, *EEPROMFileStartCluster, FILE_CLUSTERS(EEPROM_FILE_SIZE_BYTES)); - - break; - - case DISK_BLOCK_RootFilesBlock: - memcpy(BlockBuffer, FirmwareFileEntries, sizeof(FirmwareFileEntries)); - - break; - - default: - ReadWriteFLASHFileBlock(BlockNumber, BlockBuffer, true); - ReadWriteEEPROMFileBlock(BlockNumber, BlockBuffer, true); - - break; - } - - /* Write the entire read block Buffer to the host */ - Endpoint_Write_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); - Endpoint_ClearIN(); -} -- cgit v1.2.3