From 9e0c6247c9cbc5c4c7a4ae6b1e2adc6a7a332c49 Mon Sep 17 00:00:00 2001 From: tmk Date: Sat, 11 Feb 2012 01:56:31 +0900 Subject: Added terminal_usb adapter for IBM Terminal keyboard. --- terminal_usb/Makefile.122_pjrc | 56 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 terminal_usb/Makefile.122_pjrc (limited to 'terminal_usb/Makefile.122_pjrc') diff --git a/terminal_usb/Makefile.122_pjrc b/terminal_usb/Makefile.122_pjrc new file mode 100644 index 000000000..b91e484ff --- /dev/null +++ b/terminal_usb/Makefile.122_pjrc @@ -0,0 +1,56 @@ +# +# Makefile for PJRC Teensy +# + + +# Target file name (without extension). +TARGET = terminal_usb_122_pjrc + +# Directory common source filess exist +COMMON_DIR = .. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = main.c \ + keymap_122.c \ + matrix.c \ + led.c \ + ps2.c + +CONFIG_H = config_122_pjrc.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# *Comment out* to disable the options. +# +#MOUSEKEY_ENABLE = yes # Mouse keys +#EXTRAKEY_ENABLE = yes # Audio control and System control +#NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + + +include $(COMMON_DIR)/pjrc.mk +include $(COMMON_DIR)/common.mk -- cgit v1.2.3