From fad54872667d493ccd95e2171addf6c6b22343b7 Mon Sep 17 00:00:00 2001 From: TerryMathews Date: Thu, 22 Sep 2016 23:33:22 -0400 Subject: Initial support for TADA68 --- keyboards/tada68/rules.mk | 66 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 keyboards/tada68/rules.mk (limited to 'keyboards/tada68/rules.mk') diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk new file mode 100644 index 000000000..1102584d8 --- /dev/null +++ b/keyboards/tada68/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -- cgit v1.2.3 From e71d4f3235348f6b6ac0e884ddf0a46991eace26 Mon Sep 17 00:00:00 2001 From: TerryMathews Date: Fri, 23 Sep 2016 14:20:05 -0400 Subject: Disable RGB led support until a suitable pin is located --- keyboards/tada68/config.h | 9 ++++++--- keyboards/tada68/rules.mk | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'keyboards/tada68/rules.mk') diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index 5c2b29062..5d8757936 100644 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -66,12 +66,15 @@ along with this program. If not, see . /* Underlight configuration */ -#define RGB_DI_PIN F5 +/*#define RGB_DI_PIN E2 #define RGBLIGHT_TIMER -#define RGBLED_NUM 4 // Number of LEDs +#define RGBLED_NUM 2 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 +#define RGBLIGHT_VAL_STEP 17*/ +//Disabled while I figure out a suitable pin for RGB support. +//I've tried F5, D2, D3, and E2 but it's possible the end of my +//strand is bad. New LEDs on order. /* * Feature disable options diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk index 1102584d8..d8ec42365 100644 --- a/keyboards/tada68/rules.mk +++ b/keyboards/tada68/rules.mk @@ -58,7 +58,7 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) MIDI_ENABLE ?= no # MIDI controls AUDIO_ENABLE ?= no -- cgit v1.2.3