From 8c794d73fa75fa2f3f985617a2b566974f3b29bf Mon Sep 17 00:00:00 2001 From: folkert4 Date: Fri, 27 Jan 2017 13:51:39 -0500 Subject: Added Espynn's keymap --- keyboards/planck/keymaps/espynn/Makefile | 63 +++++ .../planck/keymaps/espynn/keyboard-layout.jpg | Bin 0 -> 52908 bytes keyboards/planck/keymaps/espynn/keymap.c | 151 ++++++++++++ keyboards/planck/keymaps/espynn/layout.json | 271 +++++++++++++++++++++ keyboards/planck/keymaps/espynn/readme.md | 18 ++ 5 files changed, 503 insertions(+) create mode 100644 keyboards/planck/keymaps/espynn/Makefile create mode 100644 keyboards/planck/keymaps/espynn/keyboard-layout.jpg create mode 100644 keyboards/planck/keymaps/espynn/keymap.c create mode 100644 keyboards/planck/keymaps/espynn/layout.json create mode 100644 keyboards/planck/keymaps/espynn/readme.md (limited to 'keyboards/planck/keymaps/espynn') diff --git a/keyboards/planck/keymaps/espynn/Makefile b/keyboards/planck/keymaps/espynn/Makefile new file mode 100644 index 000000000..44a030ba3 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/Makefile @@ -0,0 +1,63 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/espynn/keyboard-layout.jpg b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg new file mode 100644 index 000000000..55e5396bf Binary files /dev/null and b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg differ diff --git a/keyboards/planck/keymaps/espynn/keymap.c b/keyboards/planck/keymaps/espynn/keymap.c new file mode 100644 index 000000000..4a3fe32b8 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/keymap.c @@ -0,0 +1,151 @@ +#include "planck.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif +#define PREVENT_STUCK_MODIFIERS +extern keymap_config_t keymap_config; + +// Symbolic names for macro IDs. +#define _QWERTY 0 // QUERTY layer +#define _LOWER 1 // Lower layer +#define _RAISE 2 // Raise layer +#define _CUSTOM 3 // Custom layer (LOWER + RAISE) +#define _BL 4 // Backlight +#define _CUS0 5 // Mobile# +#define _CUS1 6 // signature +#define _CUS2 7 // macro 2 +#define _CUS3 8 // macro 3 +#define _CUS4 9 // macro 4 +#define _CUS5 10 // email +#define _COPY 11 // copy +#define _PASTE 12 // paste +#define _CUT 13 // cut + +// Macro shortcuts. +#define QWERTY M(_LOWER) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define CUSTOM M(_CUSTOM) +#define BL M(_BL) +#define CUS0 M(_CUS0) +#define CUS1 M(_CUS1) +#define CUS2 M(_CUS2) +#define CUS3 M(_CUS3) +#define CUS4 M(_CUS4) +#define CUS5 M(_CUS5) +#define COPY M(_COPY) +#define PASTE M(_PASTE) +#define CUT M(_CUT) + +// Func macro definitions. +#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER +#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE +#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK) +#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift +#define ZM_NRM FUNC(4) // Zoom normal +#define ZM_IN FUNC(5) // Zoom out +#define ZM_OUT FUNC(6) // Zoom in + +// Enable these functions using FUNC(n) macro. +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN), + [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP), + [2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS), + [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [4] = ACTION_MODS_KEY(MOD_LCTL, KC_0), + [5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), + [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS), + [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS), + }; + +// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = { /* QWERTY */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_DEL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_LOWER] = { /* LOWER */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[_RAISE] = { /* RAISE */ + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_CUSTOM] = { /* CUSTOM */ + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +} +}; + +// Set a layer persistantly. +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Macro actions for each corresponding ID. +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _RAISE: // Raised layer. + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } + break; + case _LOWER: // Lowered layer. + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } + break; + case _BL: // Backlight + if (record->event.pressed) { + register_code(KC_RSFT); +#ifdef BACKLIGHT_ENABLE + backlight_step(); +#endif + } else { + unregister_code(KC_RSFT); + } + break; + case _CUS0: // enter your mobile# here + return MACRODOWN(T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(9),END); + case _CUS1: // signature line for email + return MACRODOWN(T(ENT), T(ENT), T(MINS), T(J), T(W), END); + case _CUS2: // Custom macro 2 + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_L), UP(KC_LSFT), END ); + case _CUS3: // custom macro 3 + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_F), UP(KC_LSFT), END ); + case _CUS4: // custom macro 4 + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_I), UP(KC_LSFT), END ); + case _CUS5: // Enter your email here + return MACRODOWN( TYPE(KC_F), + DOWN(KC_LSFT), TYPE(KC_2), UP(KC_LSFT), + TYPE(KC_G), TYPE(KC_M), TYPE(KC_A), TYPE(KC_I), TYPE(KC_L), TYPE(KC_DOT), TYPE(KC_C), TYPE(KC_O), TYPE(KC_M), END ); + case _CUT: //cut macro + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_X), UP(KC_LCTL), END ); + case _COPY: // copy macro + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_C), UP(KC_LCTL), END ); + case _PASTE: // paste macro + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_V), UP(KC_LCTL), END ); + }; + return MACRO_NONE; +} \ No newline at end of file diff --git a/keyboards/planck/keymaps/espynn/layout.json b/keyboards/planck/keymaps/espynn/layout.json new file mode 100644 index 000000000..38ccc3452 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/layout.json @@ -0,0 +1,271 @@ +[ + { + "backcolor": "#858585", + "name": "Planck 40%", + "author": "James Folkert", + "background": { + "name": "Aluminium brushed", + "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');" + }, + "switchMount": "cherry", + "switchBrand": "cherry", + "switchType": "MX1A-A1xx", + "pcb": true, + "plate": true + }, + [ + { + "fa": [ + 2, + 2, + 0, + 2 + ] + }, + "F1\n1\n\n!\n\n\n\n\n\n", + "F2\n2\n\n@\n\n\n\n\n\nQ", + "F3\n3\n\n#\n\n\n\n\n\nW", + "F4\n4\n\n$\n\n\n\n\n\nE", + "F5\n5\n\n%\n\n\n\n\n\nR", + "F6\n6\n\n^\n\n\n\n\n\nT", + "F7\n6\n\n&\n\n\n\n\n\nY", + "F8\n8\n\n*\nMacro4\n\n\n\n\nU", + "F9\n9\n\n(\n\n\n\n\n\nI", + { + "fa": [ + 0, + 0, + 0, + 2 + ] + }, + "F10\n0\n\n)\n\n\n\n\n\nO", + { + "fa": [ + 2, + 2, + 0, + 2 + ] + }, + "F11\n-\n\n_\n\n\n\n\n\nP", + "F12\n=\n\n+\n\n\n\n\n\n" + ], + [ + { + "a": 7, + "f": 3 + }, + "", + { + "f": 3 + }, + "A", + { + "f": 3 + }, + "S", + { + "f": 3 + }, + "D", + { + "t": "#ff0000", + "a": 4, + "f": 3 + }, + "\n(\n\n\n\n\n\n\n\nF", + { + "t": "#000000", + "f": 3 + }, + "\n)\n\n\n\n\n\n\n\nG", + { + "f": 3 + }, + "\n{\n\n\nMacro0\n\n\n\n\nH", + { + "t": "#ff0000", + "f": 3 + }, + "\n}\n\n\nMacro3\n\n\n\n\nJ", + { + "t": "#000000", + "f": 3 + }, + "{\n\n\n\n\n\n\n\n\nK", + { + "f": 3 + }, + "{\n\n\n\n\n\n\n\n\nL", + { + "fa": [ + 2, + 2, + 2, + 2, + 0, + 0, + 0, + 2 + ] + }, + "\\\n\n|\n\n\n\n\n:\n\n;", + { + "a": 7, + "fa": [ + 9 + ] + }, + "" + ], + [ + { + "f": 3 + }, + "Shift", + { + "f": 3 + }, + "Z", + { + "f": 3 + }, + "X\n\n\n\nCut", + { + "f": 3 + }, + "C\n\n\n\nCopy", + { + "a": 4, + "fa": [ + 2, + 2, + 2, + 2 + ] + }, + "\\\n[\n|\n{\nPaste\n\n\n\n\nV", + "|\n]\n\n}\nMacro1\n\n\n\n\nB", + "`\n'\n~\n\"\nMacro5\n\n\n\n\nN", + "~\n\"\n\n\nMacro2\n\n\n\n\nM", + { + "fa": [ + 2, + 2, + 2, + 2, + 0, + 0, + 0, + 1 + ] + }, + "[\n\n{\n\n\n\n\n<\n\n,", + "[\n\n{\n\n\n\n\n\n\n.", + { + "a": 6 + }, + "\n\n?\n\n\n\n\n\n/", + { + "a": 4, + "fa": [ + 2, + 2, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 0 + ] + }, + "\n\n\nShift\n\n\n\n\n\n\nShift" + ], + [ + { + "a": 7, + "f": 3 + }, + "Ctrl\n\n\n\nBLight", + { + "a": 4, + "fa": [ + 2, + 1, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 9 + ] + }, + "\nZNorm\n\n\nRESET\n\n\n\n\n", + { + "fa": [ + 2, + 1, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 6 + ] + }, + "\nZIn\n\n\n\n\n\n\n\n", + { + "fa": [ + 2, + 1, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 9 + ] + }, + "\nZOut\n\n\n\n\n\n\n\n", + { + "a": 7, + "fa": [ + 9 + ] + }, + "⇓", + { + "a": 4, + "fa": [ + 9, + 5, + 5 + ], + "w": 2 + }, + "\n\n", + { + "a": 7 + }, + "⇑", + { + "a": 4, + "fa": [ + 2 + ] + }, + "\n\n\n\n\n\n\n\n\n←", + "\n\n\n\n\n\n\n\n\n↓", + "\n\n\n\n\n\n\n\n\n↑", + "\n\n\n\n\n\n\n\n\n→" + ] +] \ No newline at end of file diff --git a/keyboards/planck/keymaps/espynn/readme.md b/keyboards/planck/keymaps/espynn/readme.md new file mode 100644 index 000000000..8882f4601 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/readme.md @@ -0,0 +1,18 @@ +# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard +Created by James Folkert: https://twitter.com/trekloFsemaJ +Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c + + +![Layout](keyboard-layout.png "Practical Keymap") + + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/ +* [JSON of raw layout] (layout.json "JSON of raw layout") + +# Notes +* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here +* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4 +* add your mobile and email to the keymap before make +* RAISE and LOWER also acts as PgUp and PgDn when tapped. +* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works) +* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience. \ No newline at end of file -- cgit v1.2.3