From b30e6c1c9e1c876ddf95fcc3bc727a04ca6f2abc Mon Sep 17 00:00:00 2001 From: IBNobody Date: Tue, 20 Sep 2016 21:46:33 -0500 Subject: Created I2C and Serial keymaps for unit testing Having a dedicated I2C keymap and a dedicated serial keymap will allow the testing suite to check both conditions. --- keyboards/lets_split/keymaps/serial/config.h | 102 +++++++++++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 keyboards/lets_split/keymaps/serial/config.h (limited to 'keyboards/lets_split/keymaps/serial/config.h') diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h new file mode 100644 index 000000000..f4d900acc --- /dev/null +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -0,0 +1,102 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Wootpatoot +#define PRODUCT Lets Split +#define DESCRIPTION A split keyboard for the cheap makers + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { B5, B4, E6, D7 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } + +#define CATERINA_BOOTLOADER + +// #define USE_I2C + +// Use serial if not using I2C +#ifndef USE_I2C +# define USE_SERIAL +#endif + +// #define EE_HANDS + +#define I2C_MASTER_LEFT +// #define I2C_MASTER_RIGHT + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D4 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif -- cgit v1.2.3 From 3774a7fcdab5544fc787f4c200be05fcd417e31f Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 17 Nov 2016 17:42:14 -0500 Subject: rgb light through midi --- keyboards/amj60/config.h | 2 +- keyboards/clueboard/rev1/config.h | 2 +- keyboards/clueboard/rev2/config.h | 2 +- keyboards/cluecard/config.h | 2 +- keyboards/cluecard/keymaps/rgb_effects/config.h | 2 +- keyboards/cluepad/config.h | 2 +- keyboards/ergodox/keymaps/jack/config.h | 3 +- keyboards/gh60/keymaps/robotmaxtron/config.h | 2 +- keyboards/handwired/minorca/keymaps/rgb/config.h | 2 +- keyboards/jd40/config.h | 2 +- keyboards/kc60/keymaps/ws2812/config.h | 2 +- keyboards/lets_split/config.h | 2 +- keyboards/lets_split/keymaps/i2c/config.h | 2 +- keyboards/lets_split/keymaps/serial/config.h | 2 +- keyboards/phantom/config.h | 2 +- keyboards/planck/keymaps/experimental/config.h | 2 +- keyboards/planck/keymaps/yang/config.h | 2 +- keyboards/preonic/config.h | 2 +- keyboards/preonic/keymaps/kinesis/config.h | 2 +- keyboards/satan/config.h | 2 +- keyboards/tada68/config.h | 2 +- quantum/light_ws2812.c | 2 - quantum/rgblight.c | 10 +-- quantum/rgblight.h | 2 +- readme.md | 4 +- tmk_core/protocol/lufa/lufa.c | 96 ++++++++++++++++++++++++ 26 files changed, 126 insertions(+), 31 deletions(-) (limited to 'keyboards/lets_split/keymaps/serial/config.h') diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index d98e0e9f2..7c06f9a6c 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h index 8c9497232..f40876ffb 100644 --- a/keyboards/clueboard/rev1/config.h +++ b/keyboards/clueboard/rev1/config.h @@ -26,7 +26,7 @@ /* Underlight configuration */ #define RGB_DI_PIN B2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h index 15ca4ece8..8435fd02b 100644 --- a/keyboards/clueboard/rev2/config.h +++ b/keyboards/clueboard/rev2/config.h @@ -30,7 +30,7 @@ /* Underlight configuration */ #define RGB_DI_PIN D7 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h index 765347b13..6520eb557 100644 --- a/keyboards/cluecard/config.h +++ b/keyboards/cluecard/config.h @@ -140,7 +140,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN E6 -//#define RGBLIGHT_TIMER +//#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/keymaps/rgb_effects/config.h b/keyboards/cluecard/keymaps/rgb_effects/config.h index e88847df4..c6c9342c8 100644 --- a/keyboards/cluecard/keymaps/rgb_effects/config.h +++ b/keyboards/cluecard/keymaps/rgb_effects/config.h @@ -4,7 +4,7 @@ #include "../../config.h" // place overrides here -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_SNAKE_LENGTH 3 #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2 diff --git a/keyboards/cluepad/config.h b/keyboards/cluepad/config.h index bae05fade..bd64dfd27 100644 --- a/keyboards/cluepad/config.h +++ b/keyboards/cluepad/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN F6 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h index 5bf109c18..5c1165226 100644 --- a/keyboards/ergodox/keymaps/jack/config.h +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -5,12 +5,13 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D7 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 15 // Number of LEDs #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 #define RGB_MIDI +#define RGBW_BB_TWI #endif \ No newline at end of file diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index 6a29e6b8c..bcd753461 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -182,7 +182,7 @@ along with this program. If not, see . #define ws2812_pin PF4 */ #define RGB_DI_PIN F4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h index deaac2e26..43b3c5911 100644 --- a/keyboards/handwired/minorca/keymaps/rgb/config.h +++ b/keyboards/handwired/minorca/keymaps/rgb/config.h @@ -11,7 +11,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D5 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 13 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index e2594f4b3..047be5707 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . ) #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h index 2f39ea8e5..43abf6228 100644 --- a/keyboards/kc60/keymaps/ws2812/config.h +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -2,7 +2,7 @@ /* WS2812B RGB Underglow LED */ #define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index f4d900acc..b0ad522fc 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index 2671fabf6..72e5ae66b 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index f4d900acc..b0ad522fc 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 983a1d73f..71a33498b 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 20 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 52acd1905..cc093bee4 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -9,7 +9,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN B1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/yang/config.h b/keyboards/planck/keymaps/yang/config.h index feb5a1190..4ed19d76f 100644 --- a/keyboards/planck/keymaps/yang/config.h +++ b/keyboards/planck/keymaps/yang/config.h @@ -5,7 +5,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 3fb978c2f..f88acf211 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h index 086baa84f..e6099ceb8 100644 --- a/keyboards/preonic/keymaps/kinesis/config.h +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index 7e9f91cc8..eb357b39e 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index 5d8757936..19cf9c9b3 100644 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ /*#define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 2 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index aac058f53..a883b1388 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -16,8 +16,6 @@ #include #include "debug.h" -#define RGBW_BB_TWI 1 - #ifdef RGBW_BB_TWI // Port for the I2C diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 1901010bf..6b58f6654 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -174,7 +174,7 @@ void rgblight_init(void) { } eeconfig_debug_rgblight(); // display current eeprom values - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_init(); // setup the timer #endif @@ -221,7 +221,7 @@ void rgblight_mode(uint8_t mode) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode: %u\n", rgblight_config.mode); if (rgblight_config.mode == 1) { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 23) { @@ -231,7 +231,7 @@ void rgblight_mode(uint8_t mode) { // MODE 15-20, snake // MODE 21-23, knight - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); #endif } @@ -245,7 +245,7 @@ void rgblight_toggle(void) { if (rgblight_config.enable) { rgblight_mode(rgblight_config.mode); } else { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif _delay_ms(50); @@ -371,7 +371,7 @@ void rgblight_set(void) { } } -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS // Animation timer -- AVR Timer3 void rgblight_timer_init(void) { diff --git a/quantum/rgblight.h b/quantum/rgblight.h index d16ba24e5..330c2fe1b 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,7 +1,7 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS #define RGBLIGHT_MODES 23 #else #define RGBLIGHT_MODES 1 diff --git a/readme.md b/readme.md index d5a259ccb..2364b5301 100644 --- a/readme.md +++ b/readme.md @@ -1135,12 +1135,12 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring RGBLIGHT_ENABLE = yes -In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile). +In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`. Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default: #define RGB_DI_PIN F4 // The pin your RGB strip is wired to - #define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index b628cde37..7eb9be601 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -51,6 +51,7 @@ #include "descriptor.h" #include "lufa.h" +#include "quantum.h" #ifdef NKRO_ENABLE #include "keycode_config.h" @@ -1111,9 +1112,104 @@ void cc_callback(MidiDevice * device, #endif } +void send_dword(uint32_t number) { + uint16_t word = (number >> 16); + send_word(word); + send_word(number & 0xFFFFUL); +} + +void send_word(uint16_t number) { + uint8_t byte = number >> 8; + send_byte(byte); + send_byte(number & 0xFF); +} + +void send_byte(uint8_t number) { + uint8_t nibble = number >> 4; + send_nibble(nibble); + send_nibble(number & 0xF); +} + +void send_nibble(uint8_t number) { + switch (number) { + case 0: + register_code(KC_0); + unregister_code(KC_0); + break; + case 1 ... 9: + register_code(KC_1 + (number - 1)); + unregister_code(KC_1 + (number - 1)); + break; + case 0xA ... 0xF: + register_code(KC_A + (number - 0xA)); + unregister_code(KC_A + (number - 0xA)); + break; + } +} + +uint8_t midi_buffer[16] = {0}; + void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { // for (int i = 0; i < length; i++) // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); + // if (start == 0x27) { + // SEND_STRING("\n"); + // send_word(start); + // SEND_STRING(": "); + for (uint8_t place = 0; place < length; place++) { + // send_byte(*data); + midi_buffer[start + place] = *data; + if (*data == 0xF7) + sysex_buffer_callback(start + place, &midi_buffer); + // SEND_STRING(" "); + data++; + } + // } + +} + +void sysex_buffer_callback(uint8_t length, uint8_t * data) { + uint8_t * pointer_copy = data; + + if (*data++ != 0xF0) + return + data++; + data++; + data++; + data++; + + switch (*data++) { + case 0x27: ; // RGB LED functions + switch (*data++) + case 0x00: ; // Update HSV + uint32_t part1 = *data++; + uint32_t part2 = *data++; + uint32_t part3 = *data++; + uint32_t part4 = *data++; + uint32_t part5 = *data++; + uint32_t chunk = ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; + // SEND_STRING("\nCHUNK: "); + // send_dword(chunk); + rgblight_sethsv(((chunk >> 16) & 0xFFFF) % 360, (chunk >> 8) & 0xFF, chunk & 0xFF); + // SEND_STRING("\nHUE: "); + // send_word(((chunk >> 16) & 0xFFFF) % 360); + // SEND_STRING("\nSAT: "); + // send_word((chunk >> 8) & 0xFF); + // SEND_STRING("\nVAL: "); + // send_word(chunk & 0xFF); + break; + case 0x01: ; // Update RGB + break; + break; + } + + // SEND_STRING("\nDATA:\n"); + // while (*pointer_copy != 0xF7) { + // send_byte(*pointer_copy++); + // SEND_STRING(" "); + // } + } + #endif -- cgit v1.2.3 From 9d24943ec1285c2d5d5853390abd5eb4e0cd7a2c Mon Sep 17 00:00:00 2001 From: TerryMathews Date: Sun, 22 Jan 2017 15:37:48 -0500 Subject: Refactor code to eliminate duplicate defines * Moved duplicated defines out of inappropriate source files (matrix pins in keymap subdirectory) * Eliminated default keymap directory * Hardcoded serial keymap to use serial defines and EE_CONFIG * Hardcoded i2c keymap to use i2c defines --- keyboards/lets_split/config.h | 43 ------ keyboards/lets_split/keymaps/default/keymap.c | 188 -------------------------- keyboards/lets_split/keymaps/i2c/config.h | 85 +----------- keyboards/lets_split/keymaps/serial/config.h | 87 +----------- keyboards/lets_split/rev1/config.h | 5 +- keyboards/lets_split/rev2/config.h | 4 +- 6 files changed, 16 insertions(+), 396 deletions(-) delete mode 100644 keyboards/lets_split/keymaps/default/keymap.c (limited to 'keyboards/lets_split/keymaps/serial/config.h') diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 4db45ab0b..7df0c5752 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -20,49 +20,6 @@ along with this program. If not, see . #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot -#define PRODUCT Lets Split -#define DESCRIPTION A split keyboard for the cheap makers - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - #ifdef SUBPROJECT_rev1 #include "rev1/config.h" #endif diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c deleted file mode 100644 index 6f1f71f5f..000000000 --- a/keyboards/lets_split/keymaps/default/keymap.c +++ /dev/null @@ -1,188 +0,0 @@ -#include "lets_split.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - KC_LCTL, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, MT(MOD_LSFT, KC_SPC), RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_COLEMAK] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_DVORAK] = KEYMAP( \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), -[3] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ - _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), -[4] = KEYMAP( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = KEYMAP( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ -) -}; - -#ifdef AUDIO_ENABLE -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -#endif - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - persistant_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - persistant_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif - persistant_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - } - return true; -} \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index 72e5ae66b..efe8bb0f2 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -14,89 +14,14 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot -#define PRODUCT Lets Split -#define DESCRIPTION A split keyboard for the cheap makers - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 - -// wiring of each half -#define MATRIX_ROW_PINS { B5, B4, E6, D7 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } - -#define CATERINA_BOOTLOADER - #define USE_I2C -// Use serial if not using I2C -#ifndef USE_I2C -# define USE_SERIAL -#endif - -// #define EE_HANDS - #define I2C_MASTER_LEFT // #define I2C_MASTER_RIGHT -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" #endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index b0ad522fc..cd766cc4f 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -15,88 +15,15 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H -#include "config_common.h" +#define USE_SERIAL -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot -#define PRODUCT Lets Split -#define DESCRIPTION A split keyboard for the cheap makers +#define EE_HANDS -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 - -// wiring of each half -#define MATRIX_ROW_PINS { B5, B4, E6, D7 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } - -#define CATERINA_BOOTLOADER - -// #define USE_I2C - -// Use serial if not using I2C -#ifndef USE_I2C -# define USE_SERIAL -#endif - -// #define EE_HANDS - -#define I2C_MASTER_LEFT -// #define I2C_MASTER_RIGHT - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" #endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif \ No newline at end of file diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index 825e5ec24..4d3d382a4 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -25,7 +25,6 @@ along with this program. If not, see . #define PRODUCT_ID 0x3060 #define DEVICE_VER 0x0001 #define MANUFACTURER Wootpatoot -#define PRODUCT Lets Split #define PRODUCT Lets Split v1 #define DESCRIPTION A split keyboard for the cheap makers @@ -42,13 +41,13 @@ along with this program. If not, see . // #define USE_I2C // Use serial if not using I2C -#ifndef USE_I2C +/*#ifndef USE_I2C # define USE_SERIAL #endif // #define EE_HANDS -#define I2C_MASTER_LEFT +#define I2C_MASTER_LEFT*/ // #define I2C_MASTER_RIGHT /* COL2ROW or ROW2COL */ diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index e9689d773..ed9e106db 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -42,13 +42,13 @@ along with this program. If not, see . // #define USE_I2C // Use serial if not using I2C -#ifndef USE_I2C +/*#ifndef USE_I2C # define USE_SERIAL #endif // #define EE_HANDS -#define I2C_MASTER_LEFT +#define I2C_MASTER_LEFT*/ // #define I2C_MASTER_RIGHT /* COL2ROW or ROW2COL */ -- cgit v1.2.3 From ef9e544a7eb8551748dcf96729fde8d66ac6cc57 Mon Sep 17 00:00:00 2001 From: TerryMathews Date: Sun, 29 Jan 2017 22:22:32 -0500 Subject: Let's Split: establish rev2fliphalf subproject Subproject to accomodate second half pad built in opposite orientation (places TRRS jacks on opposing edges for shorter cable runs) --- keyboards/lets_split/config.h | 3 + keyboards/lets_split/keymaps/i2c/config.h | 3 + keyboards/lets_split/keymaps/serial/config.h | 3 + keyboards/lets_split/lets_split.h | 3 + keyboards/lets_split/rev2fliphalf/Makefile | 3 + keyboards/lets_split/rev2fliphalf/config.h | 91 ++++++++++++++++++++++++ keyboards/lets_split/rev2fliphalf/rev2fliphalf.c | 32 +++++++++ keyboards/lets_split/rev2fliphalf/rev2fliphalf.h | 28 ++++++++ keyboards/lets_split/rev2fliphalf/rules.mk | 5 ++ 9 files changed, 171 insertions(+) create mode 100644 keyboards/lets_split/rev2fliphalf/Makefile create mode 100644 keyboards/lets_split/rev2fliphalf/config.h create mode 100644 keyboards/lets_split/rev2fliphalf/rev2fliphalf.c create mode 100644 keyboards/lets_split/rev2fliphalf/rev2fliphalf.h create mode 100644 keyboards/lets_split/rev2fliphalf/rules.mk (limited to 'keyboards/lets_split/keymaps/serial/config.h') diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 7df0c5752..008fb0978 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -26,4 +26,7 @@ along with this program. If not, see . #ifdef SUBPROJECT_rev2 #include "rev2/config.h" #endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif #endif diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index efe8bb0f2..332c990fc 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -24,4 +24,7 @@ along with this program. If not, see . #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" #endif \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index cd766cc4f..0e59b191b 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -26,4 +26,7 @@ along with this program. If not, see . #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" #endif \ No newline at end of file diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h index 2cdfb061f..0de308c7a 100644 --- a/keyboards/lets_split/lets_split.h +++ b/keyboards/lets_split/lets_split.h @@ -7,6 +7,9 @@ #ifdef SUBPROJECT_rev2 #include "rev2.h" #endif +#ifdef SUBPROJECT_rev2fliphalf + #include "rev2fliphalf.h" +#endif #include "quantum.h" diff --git a/keyboards/lets_split/rev2fliphalf/Makefile b/keyboards/lets_split/rev2fliphalf/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/lets_split/rev2fliphalf/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/lets_split/rev2fliphalf/config.h b/keyboards/lets_split/rev2fliphalf/config.h new file mode 100644 index 000000000..1c45cf136 --- /dev/null +++ b/keyboards/lets_split/rev2fliphalf/config.h @@ -0,0 +1,91 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Wootpatoot +#define PRODUCT Lets Split v2 +#define DESCRIPTION A split keyboard for the cheap makers + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { D7, E6, B4, B5 } +//#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order + +//#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif \ No newline at end of file diff --git a/keyboards/lets_split/rev2fliphalf/rev2fliphalf.c b/keyboards/lets_split/rev2fliphalf/rev2fliphalf.c new file mode 100644 index 000000000..c505d3a6e --- /dev/null +++ b/keyboards/lets_split/rev2fliphalf/rev2fliphalf.c @@ -0,0 +1,32 @@ +#include "lets_split.h" + +#ifdef AUDIO_ENABLE + float tone_startup[][2] = SONG(STARTUP_SOUND); + float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void matrix_init_kb(void) { + + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + +void shutdown_user(void) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); + #endif +} diff --git a/keyboards/lets_split/rev2fliphalf/rev2fliphalf.h b/keyboards/lets_split/rev2fliphalf/rev2fliphalf.h new file mode 100644 index 000000000..993e149dd --- /dev/null +++ b/keyboards/lets_split/rev2fliphalf/rev2fliphalf.h @@ -0,0 +1,28 @@ +#ifndef REV2FLIPHALF_H +#define REV2FLIPHALF_H + +#include "../lets_split.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ + k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ + k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ + k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k40, k41, k42, k43, k44, k45 }, \ + { k50, k51, k52, k53, k54, k55 }, \ + { k60, k61, k62, k63, k64, k65 }, \ + { k70, k71, k72, k73, k74, k75 } \ + } + +#endif \ No newline at end of file diff --git a/keyboards/lets_split/rev2fliphalf/rules.mk b/keyboards/lets_split/rev2fliphalf/rules.mk new file mode 100644 index 000000000..80a942d06 --- /dev/null +++ b/keyboards/lets_split/rev2fliphalf/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif -- cgit v1.2.3 From 9c02e2ab49f020218f39f386fcbe2edfcea3d810 Mon Sep 17 00:00:00 2001 From: Jimmy Chan Date: Mon, 6 Feb 2017 08:42:38 -0800 Subject: correctly put eeprom EE_HANDS at addr 0x0a (decimal 10). default to rev2 project. do not default EE_HANDS for the serial keymap if you compare split_util.h with the original project by ahtn, the address we look for isLeftHand config went from addr 7 to addr 10 (decimal). The EEP files were not updated. EE_HANDS should not be enabled by default since it's more confusing for most users --- keyboards/lets_split/Makefile | 4 +++- keyboards/lets_split/eeprom-lefthand.eep | 2 +- keyboards/lets_split/eeprom-righthand.eep | 2 +- keyboards/lets_split/keymaps/serial/config.h | 4 ++-- 4 files changed, 7 insertions(+), 5 deletions(-) (limited to 'keyboards/lets_split/keymaps/serial/config.h') diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index 4e2a6f00f..f5c87d4d6 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,3 +1,5 @@ +SUBPROJECT_DEFAULT = rev2 + ifndef MAKEFILE_INCLUDED include ../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/lets_split/eeprom-lefthand.eep b/keyboards/lets_split/eeprom-lefthand.eep index a92200b12..b9666a74c 100644 --- a/keyboards/lets_split/eeprom-lefthand.eep +++ b/keyboards/lets_split/eeprom-lefthand.eep @@ -1,2 +1,2 @@ -:080000000000000000000001F7 +:0B0000000000000000000000000001F4 :00000001FF diff --git a/keyboards/lets_split/eeprom-righthand.eep b/keyboards/lets_split/eeprom-righthand.eep index 91a683170..94cc5be7f 100644 --- a/keyboards/lets_split/eeprom-righthand.eep +++ b/keyboards/lets_split/eeprom-righthand.eep @@ -1,2 +1,2 @@ -:080000000000000000000000F8 +:0B0000000000000000000000000000F5 :00000001FF diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index 0e59b191b..753f422dd 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -18,7 +18,7 @@ along with this program. If not, see . #define USE_SERIAL -#define EE_HANDS +// #define EE_HANDS #ifdef SUBPROJECT_rev1 @@ -29,4 +29,4 @@ along with this program. If not, see . #endif #ifdef SUBPROJECT_rev2fliphalf #include "../../rev2fliphalf/config.h" -#endif \ No newline at end of file +#endif -- cgit v1.2.3 From 56d2198b3d85f112317b4b0d09d5cf6a5c915db8 Mon Sep 17 00:00:00 2001 From: Jimmy Chan Date: Mon, 6 Feb 2017 10:03:48 -0800 Subject: rename I2C_MASTER_RIGHT to MASTER_RIGHT since this works for serial as well --- keyboards/lets_split/keymaps/i2c/config.h | 7 ++++--- keyboards/lets_split/keymaps/serial/config.h | 2 ++ keyboards/lets_split/readme.md | 4 ++-- keyboards/lets_split/split_util.c | 3 ++- 4 files changed, 10 insertions(+), 6 deletions(-) (limited to 'keyboards/lets_split/keymaps/serial/config.h') diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index 332c990fc..013542731 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -16,8 +16,9 @@ along with this program. If not, see . */ #define USE_I2C -#define I2C_MASTER_LEFT -// #define I2C_MASTER_RIGHT +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" @@ -27,4 +28,4 @@ along with this program. If not, see . #endif #ifdef SUBPROJECT_rev2fliphalf #include "../../rev2fliphalf/config.h" -#endif \ No newline at end of file +#endif diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index 753f422dd..ba271d1ac 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -18,6 +18,8 @@ along with this program. If not, see . #define USE_SERIAL +#define MASTER_LEFT +// #define _MASTER_RIGHT // #define EE_HANDS diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index 0e903065e..ecce3f415 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -123,12 +123,12 @@ The EEPROM approach requires additional setup (flashing the eeeprom) but allows The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. ### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` if for some reason it was set. +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. ### Setting the right hand as master If you always plug the usb cable into the right board, add an extra flag to your `config.h` ``` - #define I2C_MASTER_RIGHT + #define MASTER_RIGHT ``` ### Setting EE_hands to use either hands as master diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 461921798..226dc1881 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -21,7 +21,8 @@ static void setup_handedness(void) { #ifdef EE_HANDS isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); #else - #ifdef I2C_MASTER_RIGHT + // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) isLeftHand = !has_usb(); #else isLeftHand = has_usb(); -- cgit v1.2.3