From 32216066e7a6881378f7f46995a00da36c0d34f3 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:36:41 -0600 Subject: Adding nicer Infinity build instructions. --- keyboards/ergodox/readme.md | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index f81d7cd8d..9f8941863 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,3 +1,14 @@ +# Infinity on Ubuntu Quickstart + +To build an Infinity firmware under Ubuntu (tested on 15.10): + + - Run the `util/install_dependencies.sh` script as root. + - Build the firmware with `make keymap=keymapname subproject=infinity` + - Plug in the left hand keyboard only. + - Press the program button (back of keyboard, above thumb pad). + - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` + - Install the right hand firmware, but I haven't figured this out yet. + # Getting started There are two main ways you could customize the ErgoDox (EZ and Infinity) -- cgit v1.2.3 From b918aa6bab85e7dba586a9ee2bde650b721113c2 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:49:29 -0600 Subject: Adding submodule note. --- keyboards/ergodox/readme.md | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 9f8941863..c3aa6c9da 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -3,6 +3,7 @@ To build an Infinity firmware under Ubuntu (tested on 15.10): - Run the `util/install_dependencies.sh` script as root. + - Check out the submodules with `git submodule update --init --recursive` - Build the firmware with `make keymap=keymapname subproject=infinity` - Plug in the left hand keyboard only. - Press the program button (back of keyboard, above thumb pad). -- cgit v1.2.3 From 30c63b1495ac49cf4f7ea9e6271ade53496f7770 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:52:05 -0600 Subject: Noting the change directory. --- keyboards/ergodox/readme.md | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index c3aa6c9da..1c1181dba 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -4,6 +4,7 @@ To build an Infinity firmware under Ubuntu (tested on 15.10): - Run the `util/install_dependencies.sh` script as root. - Check out the submodules with `git submodule update --init --recursive` + - Go into the ErgoDox directory with `cd keyboards/ergodox` - Build the firmware with `make keymap=keymapname subproject=infinity` - Plug in the left hand keyboard only. - Press the program button (back of keyboard, above thumb pad). -- cgit v1.2.3 From 44441de8cad7255fd0637459ed39b89e34751b78 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 17:04:39 +0300 Subject: Split keyboard makefiles into rules and Makefile --- Makefile | 2 +- keyboards/alps64/Makefile | 69 +---------------------- keyboards/alps64/rules.mk | 66 ++++++++++++++++++++++ keyboards/amj60/Makefile | 71 +----------------------- keyboards/amj60/rules.mk | 66 ++++++++++++++++++++++ keyboards/arrow_pad/Makefile | 73 +----------------------- keyboards/arrow_pad/rules.mk | 70 +++++++++++++++++++++++ keyboards/atomic/Makefile | 72 +----------------------- keyboards/atomic/rules.mk | 69 +++++++++++++++++++++++ keyboards/atreus/Makefile | 89 +---------------------------- keyboards/atreus/rules.mk | 82 +++++++++++++++++++++++++++ keyboards/bantam44/Makefile | 73 +----------------------- keyboards/bantam44/rules.mk | 67 ++++++++++++++++++++++ keyboards/chibios_test/Makefile | 11 +--- keyboards/chibios_test/rules.mk | 8 +++ keyboards/clueboard/Makefile | 108 +----------------------------------- keyboards/clueboard/rules.mk | 103 ++++++++++++++++++++++++++++++++++ keyboards/cluecard/Makefile | 77 +------------------------ keyboards/cluecard/rules.mk | 70 +++++++++++++++++++++++ keyboards/cluepad/Makefile | 71 +----------------------- keyboards/cluepad/rules.mk | 65 ++++++++++++++++++++++ keyboards/ergodox/Makefile | 33 +---------- keyboards/ergodox/rules.mk | 28 ++++++++++ keyboards/gh60/Makefile | 77 +------------------------ keyboards/gh60/rules.mk | 68 +++++++++++++++++++++++ keyboards/handwired/Makefile | 2 +- keyboards/handwired/onekey/Makefile | 66 +--------------------- keyboards/handwired/rules.mk | 0 keyboards/hhkb/Makefile | 91 +----------------------------- keyboards/hhkb/rules.mk | 84 ++++++++++++++++++++++++++++ keyboards/infinity_chibios/Makefile | 69 +---------------------- keyboards/infinity_chibios/rules.mk | 66 ++++++++++++++++++++++ keyboards/jd45/Makefile | 72 +----------------------- keyboards/jd45/rules.mk | 67 ++++++++++++++++++++++ keyboards/kc60/Makefile | 77 +------------------------ keyboards/kc60/rules.mk | 70 +++++++++++++++++++++++ keyboards/kinesis/Makefile | 80 +------------------------- keyboards/kinesis/rules.mk | 73 ++++++++++++++++++++++++ keyboards/lets_split/Makefile | 77 +------------------------ keyboards/lets_split/rules.mk | 74 ++++++++++++++++++++++++ keyboards/phantom/Makefile | 75 +------------------------ keyboards/phantom/rules.mk | 69 +++++++++++++++++++++++ keyboards/planck/Makefile | 71 +----------------------- keyboards/planck/rules.mk | 67 ++++++++++++++++++++++ keyboards/preonic/Makefile | 72 +----------------------- keyboards/preonic/rules.mk | 69 +++++++++++++++++++++++ keyboards/retro_refit/Makefile | 75 +------------------------ keyboards/retro_refit/rules.mk | 68 +++++++++++++++++++++++ keyboards/s60-x/Makefile | 76 +------------------------ keyboards/s60-x/rules.mk | 69 +++++++++++++++++++++++ keyboards/satan/Makefile | 71 +----------------------- keyboards/satan/rules.mk | 66 ++++++++++++++++++++++ keyboards/sixkeyboard/Makefile | 76 +------------------------ keyboards/sixkeyboard/rules.mk | 70 +++++++++++++++++++++++ keyboards/tv44/Makefile | 76 +------------------------ keyboards/tv44/rules.mk | 69 +++++++++++++++++++++++ 56 files changed, 1792 insertions(+), 1903 deletions(-) create mode 100644 keyboards/alps64/rules.mk create mode 100644 keyboards/amj60/rules.mk create mode 100644 keyboards/arrow_pad/rules.mk create mode 100644 keyboards/atomic/rules.mk create mode 100644 keyboards/atreus/rules.mk create mode 100644 keyboards/bantam44/rules.mk create mode 100644 keyboards/chibios_test/rules.mk create mode 100644 keyboards/clueboard/rules.mk create mode 100644 keyboards/cluecard/rules.mk create mode 100644 keyboards/cluepad/rules.mk create mode 100644 keyboards/ergodox/rules.mk create mode 100644 keyboards/gh60/rules.mk create mode 100644 keyboards/handwired/rules.mk create mode 100644 keyboards/hhkb/rules.mk create mode 100644 keyboards/infinity_chibios/rules.mk create mode 100644 keyboards/jd45/rules.mk create mode 100644 keyboards/kc60/rules.mk create mode 100644 keyboards/kinesis/rules.mk create mode 100644 keyboards/lets_split/rules.mk create mode 100644 keyboards/phantom/rules.mk create mode 100644 keyboards/planck/rules.mk create mode 100644 keyboards/preonic/rules.mk create mode 100644 keyboards/retro_refit/rules.mk create mode 100644 keyboards/s60-x/rules.mk create mode 100644 keyboards/satan/rules.mk create mode 100644 keyboards/sixkeyboard/rules.mk create mode 100644 keyboards/tv44/rules.mk (limited to 'keyboards/ergodox') diff --git a/Makefile b/Makefile index 1e11dd5ff..b2a873532 100644 --- a/Makefile +++ b/Makefile @@ -12,7 +12,7 @@ STARTING_DIR := $(subst $(ABS_ROOT_DIR),,$(ABS_STARTING_DIR)) PATH_ELEMENTS := $(subst /, ,$(STARTING_DIR)) -QUANTUM_DIR:=$(ROOT_DIR)/quantum +MAKEFILE_INCLUDED=yes define NEXT_PATH_ELEMENT $$(eval CURRENT_PATH_ELEMENT := $$(firstword $$(PATH_ELEMENTS))) diff --git a/keyboards/alps64/Makefile b/keyboards/alps64/Makefile index d8325e6c8..4e2a6f00f 100644 --- a/keyboards/alps64/Makefile +++ b/keyboards/alps64/Makefile @@ -1,70 +1,3 @@ - - -# Target file name (without extension). - -# project specific files -SRC = led.c - -# MCU name -MCU = atmega32u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/alps64/rules.mk b/keyboards/alps64/rules.mk new file mode 100644 index 000000000..c326d3e26 --- /dev/null +++ b/keyboards/alps64/rules.mk @@ -0,0 +1,66 @@ + + +# Target file name (without extension). + +# project specific files +SRC = led.c + +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA \ No newline at end of file diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile index 1f695aa4d..4e2a6f00f 100644 --- a/keyboards/amj60/Makefile +++ b/keyboards/amj60/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk new file mode 100644 index 000000000..18403ac32 --- /dev/null +++ b/keyboards/amj60/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile index 09fcf3e7a..4e2a6f00f 100644 --- a/keyboards/arrow_pad/Makefile +++ b/keyboards/arrow_pad/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= yes # USB Nkey Rollover -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/arrow_pad/rules.mk b/keyboards/arrow_pad/rules.mk new file mode 100644 index 000000000..3dca9b6ea --- /dev/null +++ b/keyboards/arrow_pad/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file diff --git a/keyboards/atomic/Makefile b/keyboards/atomic/Makefile index 08e9205cb..4e2a6f00f 100644 --- a/keyboards/atomic/Makefile +++ b/keyboards/atomic/Makefile @@ -1,73 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk new file mode 100644 index 000000000..d0f3a3a1c --- /dev/null +++ b/keyboards/atomic/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile index 5894d231f..4e2a6f00f 100644 --- a/keyboards/atreus/Makefile +++ b/keyboards/atreus/Makefile @@ -1,88 +1,3 @@ - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER - ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -USB ?= /dev/cu.usbmodem1411 - -upload: build - $(ATREUS_UPLOAD_COMMAND) - +endif \ No newline at end of file diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk new file mode 100644 index 000000000..d71f50bb2 --- /dev/null +++ b/keyboards/atreus/rules.mk @@ -0,0 +1,82 @@ + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +USB ?= /dev/cu.usbmodem1411 + +upload: build + $(ATRUES_UPLOAD_COMMAND) \ No newline at end of file diff --git a/keyboards/bantam44/Makefile b/keyboards/bantam44/Makefile index 03893dbf8..4e2a6f00f 100644 --- a/keyboards/bantam44/Makefile +++ b/keyboards/bantam44/Makefile @@ -1,72 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk new file mode 100644 index 000000000..baa0e9e7a --- /dev/null +++ b/keyboards/bantam44/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/chibios_test/Makefile b/keyboards/chibios_test/Makefile index d9f2b8b83..4b07a6234 100644 --- a/keyboards/chibios_test/Makefile +++ b/keyboards/chibios_test/Makefile @@ -1,14 +1,5 @@ SUBPROJECT_DEFAULT = stm32_f072_onekey -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk new file mode 100644 index 000000000..4b5a84535 --- /dev/null +++ b/keyboards/chibios_test/rules.mk @@ -0,0 +1,8 @@ +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file \ No newline at end of file diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile index e6b13f955..b9bada8f8 100644 --- a/keyboards/clueboard/Makefile +++ b/keyboards/clueboard/Makefile @@ -1,109 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - SUBPROJECT_DEFAULT = rev2 -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change to no to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk new file mode 100644 index 000000000..3909fbd5c --- /dev/null +++ b/keyboards/clueboard/rules.mk @@ -0,0 +1,103 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file diff --git a/keyboards/cluecard/Makefile b/keyboards/cluecard/Makefile index 029d0b967..4e2a6f00f 100644 --- a/keyboards/cluecard/Makefile +++ b/keyboards/cluecard/Makefile @@ -1,76 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= yes # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/cluecard/rules.mk b/keyboards/cluecard/rules.mk new file mode 100644 index 000000000..454235877 --- /dev/null +++ b/keyboards/cluecard/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= yes # Audio output on port C6 diff --git a/keyboards/cluepad/Makefile b/keyboards/cluepad/Makefile index a331ff4dc..4e2a6f00f 100644 --- a/keyboards/cluepad/Makefile +++ b/keyboards/cluepad/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -# CONSOLE_ENABLE ?= yes # Console for debug(+400) -# COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality -RGBLIGHT_ENABLE ?= yes -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk new file mode 100644 index 000000000..19b16b95a --- /dev/null +++ b/keyboards/cluepad/rules.mk @@ -0,0 +1,65 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality +RGBLIGHT_ENABLE ?= yes +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile index 05fb588d1..716535005 100644 --- a/keyboards/ergodox/Makefile +++ b/keyboards/ergodox/Makefile @@ -1,34 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- SUBPROJECT_DEFAULT = ez -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= yes # Unicode - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk new file mode 100644 index 000000000..ac63d4eff --- /dev/null +++ b/keyboards/ergodox/rules.mk @@ -0,0 +1,28 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile index 39a9cc0ae..4e2a6f00f 100644 --- a/keyboards/gh60/Makefile +++ b/keyboards/gh60/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -# CONSOLE_ENABLE ?= yes # Console for debug(+400) -# COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR - include ../../Makefile -endif - +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk new file mode 100644 index 000000000..73f4bd76e --- /dev/null +++ b/keyboards/gh60/rules.mk @@ -0,0 +1,68 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/Makefile b/keyboards/handwired/Makefile index 57493a47c..4e2a6f00f 100644 --- a/keyboards/handwired/Makefile +++ b/keyboards/handwired/Makefile @@ -1,3 +1,3 @@ -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile index c6d10856a..4e2a6f00f 100644 --- a/keyboards/handwired/onekey/Makefile +++ b/keyboards/handwired/onekey/Makefile @@ -1,65 +1,3 @@ - - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -ifndef QUANTUM_DIR - include ../../../Makefile +ifndef MAKEFILE_INCLUDED + include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/rules.mk b/keyboards/handwired/rules.mk new file mode 100644 index 000000000..e69de29bb diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile index 6fe973e1e..4e2a6f00f 100644 --- a/keyboards/hhkb/Makefile +++ b/keyboards/hhkb/Makefile @@ -1,90 +1,3 @@ - - -# project specific files -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# as per original hasu settings -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -ifneq (, $(findstring yes, $(HHKB_JP))) - OPT_DEFS += -DHHKB_JP -endif - -debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION -debug-on: all - -debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT -debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) -debug-off: all +endif \ No newline at end of file diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk new file mode 100644 index 000000000..b43b5e23f --- /dev/null +++ b/keyboards/hhkb/rules.mk @@ -0,0 +1,84 @@ + + +# project specific files +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# as per original hasu settings +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +ifneq (, $(findstring yes, $(HHKB_JP))) + OPT_DEFS += -DHHKB_JP +endif + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) +debug-off: all diff --git a/keyboards/infinity_chibios/Makefile b/keyboards/infinity_chibios/Makefile index 649b43e64..4e2a6f00f 100644 --- a/keyboards/infinity_chibios/Makefile +++ b/keyboards/infinity_chibios/Makefile @@ -1,70 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX128BLDR4 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity KB -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = k20x5 - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -BOARD = MCHCK_K20 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/infinity_chibios/rules.mk b/keyboards/infinity_chibios/rules.mk new file mode 100644 index 000000000..56d6470b5 --- /dev/null +++ b/keyboards/infinity_chibios/rules.mk @@ -0,0 +1,66 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX128BLDR4 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity KB +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = k20x5 + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +BOARD = MCHCK_K20 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file \ No newline at end of file diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile index 75d544f16..4e2a6f00f 100644 --- a/keyboards/jd45/Makefile +++ b/keyboards/jd45/Makefile @@ -1,71 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk new file mode 100644 index 000000000..2f1e266a1 --- /dev/null +++ b/keyboards/jd45/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile index b00a488b9..4e2a6f00f 100644 --- a/keyboards/kc60/Makefile +++ b/keyboards/kc60/Makefile @@ -1,76 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk new file mode 100644 index 000000000..4efd6f988 --- /dev/null +++ b/keyboards/kc60/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/kinesis/Makefile b/keyboards/kinesis/Makefile index ca077e636..4e2a6f00f 100644 --- a/keyboards/kinesis/Makefile +++ b/keyboards/kinesis/Makefile @@ -1,79 +1,3 @@ - -## Project specific files - -SRC= matrix.c - -# MCU name -MCU = at90usb1286 -#MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=1024 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming -CUSTOM_MATRIX=yes # need to do our own thing with the matrix - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk new file mode 100644 index 000000000..a4a2b7d15 --- /dev/null +++ b/keyboards/kinesis/rules.mk @@ -0,0 +1,73 @@ + +## Project specific files + +SRC= matrix.c + +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming +CUSTOM_MATRIX=yes # need to do our own thing with the matrix diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index b9f07636b..4e2a6f00f 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,78 +1,3 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= yes # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk new file mode 100644 index 000000000..6961fbd55 --- /dev/null +++ b/keyboards/lets_split/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes \ No newline at end of file diff --git a/keyboards/phantom/Makefile b/keyboards/phantom/Makefile index 3a71fd0ee..4e2a6f00f 100644 --- a/keyboards/phantom/Makefile +++ b/keyboards/phantom/Makefile @@ -1,74 +1,3 @@ - - -SRC = led.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/phantom/rules.mk b/keyboards/phantom/rules.mk new file mode 100644 index 000000000..c6b8ca6c3 --- /dev/null +++ b/keyboards/phantom/rules.mk @@ -0,0 +1,69 @@ + + +SRC = led.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/planck/Makefile b/keyboards/planck/Makefile index 23944f92e..7d49c5ef9 100644 --- a/keyboards/planck/Makefile +++ b/keyboards/planck/Makefile @@ -1,74 +1,5 @@ - SUBPROJECT_DEFAULT = rev4 -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk new file mode 100644 index 000000000..25db53a31 --- /dev/null +++ b/keyboards/planck/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/preonic/Makefile b/keyboards/preonic/Makefile index 08e9205cb..4e2a6f00f 100644 --- a/keyboards/preonic/Makefile +++ b/keyboards/preonic/Makefile @@ -1,73 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk new file mode 100644 index 000000000..d0f3a3a1c --- /dev/null +++ b/keyboards/preonic/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/retro_refit/Makefile b/keyboards/retro_refit/Makefile index 2dd8cc5f7..4e2a6f00f 100644 --- a/keyboards/retro_refit/Makefile +++ b/keyboards/retro_refit/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/retro_refit/rules.mk b/keyboards/retro_refit/rules.mk new file mode 100644 index 000000000..10fbfa5c9 --- /dev/null +++ b/keyboards/retro_refit/rules.mk @@ -0,0 +1,68 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile index 8b51d4609..4e2a6f00f 100644 --- a/keyboards/s60-x/Makefile +++ b/keyboards/s60-x/Makefile @@ -1,75 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/s60-x/rules.mk b/keyboards/s60-x/rules.mk new file mode 100644 index 000000000..7ec93933a --- /dev/null +++ b/keyboards/s60-x/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile index a0879fc9c..4e2a6f00f 100644 --- a/keyboards/satan/Makefile +++ b/keyboards/satan/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/satan/rules.mk b/keyboards/satan/rules.mk new file mode 100644 index 000000000..1102584d8 --- /dev/null +++ b/keyboards/satan/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/sixkeyboard/Makefile b/keyboards/sixkeyboard/Makefile index 6f273064a..4e2a6f00f 100644 --- a/keyboards/sixkeyboard/Makefile +++ b/keyboards/sixkeyboard/Makefile @@ -1,75 +1,3 @@ - - -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega16u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -CUSTOM_MATRIX = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk new file mode 100644 index 000000000..2c99985a9 --- /dev/null +++ b/keyboards/sixkeyboard/rules.mk @@ -0,0 +1,70 @@ + + +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega16u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +CUSTOM_MATRIX = yes \ No newline at end of file diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile index 45ca12780..4e2a6f00f 100644 --- a/keyboards/tv44/Makefile +++ b/keyboards/tv44/Makefile @@ -1,75 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= yes # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/tv44/rules.mk b/keyboards/tv44/rules.mk new file mode 100644 index 000000000..dbba6bace --- /dev/null +++ b/keyboards/tv44/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 -- cgit v1.2.3 From 051017c3129a17a1f4c610f19067c60bf0a49da9 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 18:38:03 +0300 Subject: Split subproject make files into Makefile and rules.mk --- keyboards/chibios_test/stm32_f072_onekey/Makefile | 42 +---------- keyboards/chibios_test/stm32_f072_onekey/rules.mk | 41 +++++++++++ keyboards/chibios_test/stm32_f103_onekey/Makefile | 53 +------------ keyboards/chibios_test/stm32_f103_onekey/rules.mk | 52 +++++++++++++ keyboards/chibios_test/teensy_lc_onekey/Makefile | 48 +----------- keyboards/chibios_test/teensy_lc_onekey/rules.mk | 49 ++++++++++++ keyboards/clueboard/rev1/Makefile | 6 +- keyboards/clueboard/rev1/rules.mk | 5 ++ keyboards/clueboard/rev2/Makefile | 6 +- keyboards/clueboard/rev2/rules.mk | 5 ++ keyboards/ergodox/ez/Makefile | 77 +------------------ keyboards/ergodox/ez/rules.mk | 76 +++++++++++++++++++ keyboards/ergodox/infinity/Makefile | 78 +------------------- keyboards/ergodox/infinity/rules.mk | 77 +++++++++++++++++++ keyboards/handwired/CMD60/Makefile | 74 +------------------ keyboards/handwired/CMD60/rules.mk | 73 ++++++++++++++++++ keyboards/handwired/fivethirteen/Makefile | 74 +------------------ keyboards/handwired/fivethirteen/rules.mk | 73 ++++++++++++++++++ keyboards/handwired/minorca/Makefile | 70 +----------------- keyboards/handwired/minorca/rules.mk | 67 +++++++++++++++++ keyboards/handwired/onekey/Makefile | 2 +- keyboards/handwired/onekey/rules.mk | 65 ++++++++++++++++ keyboards/handwired/traveller/Makefile | 90 +---------------------- keyboards/handwired/traveller/rules.mk | 89 ++++++++++++++++++++++ keyboards/planck/rev3/Makefile | 4 +- keyboards/planck/rev3/rules.mk | 5 ++ keyboards/planck/rev4/Makefile | 4 +- keyboards/planck/rev4/rules.mk | 5 ++ 28 files changed, 705 insertions(+), 605 deletions(-) create mode 100644 keyboards/chibios_test/stm32_f072_onekey/rules.mk create mode 100644 keyboards/chibios_test/stm32_f103_onekey/rules.mk create mode 100644 keyboards/chibios_test/teensy_lc_onekey/rules.mk create mode 100644 keyboards/clueboard/rev1/rules.mk create mode 100644 keyboards/clueboard/rev2/rules.mk create mode 100644 keyboards/ergodox/ez/rules.mk create mode 100644 keyboards/ergodox/infinity/rules.mk create mode 100644 keyboards/handwired/CMD60/rules.mk create mode 100644 keyboards/handwired/fivethirteen/rules.mk create mode 100644 keyboards/handwired/minorca/rules.mk create mode 100644 keyboards/handwired/onekey/rules.mk create mode 100644 keyboards/handwired/traveller/rules.mk create mode 100644 keyboards/planck/rev3/rules.mk create mode 100644 keyboards/planck/rev4/rules.mk (limited to 'keyboards/ergodox') diff --git a/keyboards/chibios_test/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile index eae38c4b2..191c6bb66 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile @@ -1,41 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/rules.mk b/keyboards/chibios_test/stm32_f072_onekey/rules.mk new file mode 100644 index 000000000..eae38c4b2 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/rules.mk @@ -0,0 +1,41 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F0xx +# linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = STM32F072xB +# startup code to use +# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f0xx +# it should exist either in /os/hal/boards/ +# or /boards +BOARD = ST_STM32F072B_DISCOVERY +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m0 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 6 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# /tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + +# Build Options +# comment out to disable the options. +# +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile index 307ca5b19..191c6bb66 100644 --- a/keyboards/chibios_test/stm32_f103_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile @@ -1,52 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -# MAPLE MINI -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 -# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader -# BOARD = MAPLEMINI_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk new file mode 100644 index 000000000..307ca5b19 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/rules.mk @@ -0,0 +1,52 @@ +# project specific files +SRC = matrix.c \ + led.c + +# GENERIC STM32F103C8T6 board - stm32duino bootloader +OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 +MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader +BOARD = GENERIC_STM32_F103 + +# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) +# OPT_DEFS = +# MCU_LDSCRIPT = STM32F103x8 +# BOARD = GENERIC_STM32_F103 + +# MAPLE MINI +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 +# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader +# BOARD = MAPLEMINI_STM32_F103 + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F1xx +# linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# startup code to use +# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f1xx +# it should exist either in /os/hal/boards/ +# or /boards +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m3 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# /tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile index 43ea9d82d..191c6bb66 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/Makefile +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile @@ -1,49 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = KL2x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MKL26Z64 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = kl2x - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_LC - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m0plus - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/rules.mk b/keyboards/chibios_test/teensy_lc_onekey/rules.mk new file mode 100644 index 000000000..43ea9d82d --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/rules.mk @@ -0,0 +1,49 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = KL2x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MKL26Z64 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = kl2x + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = PJRC_TEENSY_LC + +# Cortex version +# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 +MCU = cortex-m0plus + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile index 80a942d06..191c6bb66 100644 --- a/keyboards/clueboard/rev1/Makefile +++ b/keyboards/clueboard/rev1/Makefile @@ -1,5 +1,3 @@ -BACKLIGHT_ENABLE = no - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/clueboard/rev1/rules.mk b/keyboards/clueboard/rev1/rules.mk new file mode 100644 index 000000000..80a942d06 --- /dev/null +++ b/keyboards/clueboard/rev1/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile index cea967b79..191c6bb66 100644 --- a/keyboards/clueboard/rev2/Makefile +++ b/keyboards/clueboard/rev2/Makefile @@ -1,5 +1,3 @@ -BACKLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/clueboard/rev2/rules.mk b/keyboards/clueboard/rev2/rules.mk new file mode 100644 index 000000000..cea967b79 --- /dev/null +++ b/keyboards/clueboard/rev2/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 37e554b30..191c6bb66 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,76 +1,3 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- - -# # project specific files -SRC = twimaster.c \ - matrix.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk new file mode 100644 index 000000000..37e554b30 --- /dev/null +++ b/keyboards/ergodox/ez/rules.mk @@ -0,0 +1,76 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- + +# # project specific files +SRC = twimaster.c \ + matrix.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile index ccb735a48..191c6bb66 100644 --- a/keyboards/ergodox/infinity/Makefile +++ b/keyboards/ergodox/infinity/Makefile @@ -1,77 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader -# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX256BLDR8 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity 60% -# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox -MCU_STARTUP = k20x7 - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -#BOARD = MCHCK_K20 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 - -# Build Options -# comment out to disable the options. -# -CUSTOM_MATRIX ?= yes # Custom matrix file -SERIAL_LINK_ENABLE = yes -VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile -LCD_ENABLE ?= yes -LED_ENABLE ?= yes -LCD_BACKLIGHT_ENABLE ?= yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - -ifdef LCD_ENABLE -include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk -endif - -ifdef LED_ENABLE -include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk -endif +endif \ No newline at end of file diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk new file mode 100644 index 000000000..ccb735a48 --- /dev/null +++ b/keyboards/ergodox/infinity/rules.mk @@ -0,0 +1,77 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader +# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX256BLDR8 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity 60% +# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox +MCU_STARTUP = k20x7 + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +#BOARD = MCHCK_K20 +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 + +# Build Options +# comment out to disable the options. +# +CUSTOM_MATRIX ?= yes # Custom matrix file +SERIAL_LINK_ENABLE = yes +VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile +LCD_ENABLE ?= yes +LED_ENABLE ?= yes +LCD_BACKLIGHT_ENABLE ?= yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +ifdef LCD_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk +endif + +ifdef LED_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk +endif diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile index 711759917..191c6bb66 100644 --- a/keyboards/handwired/CMD60/Makefile +++ b/keyboards/handwired/CMD60/Makefile @@ -1,73 +1,3 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/handwired/CMD60/rules.mk b/keyboards/handwired/CMD60/rules.mk new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/CMD60/rules.mk @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/fivethirteen/Makefile b/keyboards/handwired/fivethirteen/Makefile index 711759917..191c6bb66 100644 --- a/keyboards/handwired/fivethirteen/Makefile +++ b/keyboards/handwired/fivethirteen/Makefile @@ -1,73 +1,3 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/minorca/Makefile b/keyboards/handwired/minorca/Makefile index 155c1f9a2..191c6bb66 100644 --- a/keyboards/handwired/minorca/Makefile +++ b/keyboards/handwired/minorca/Makefile @@ -1,71 +1,3 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk new file mode 100644 index 000000000..c51371a78 --- /dev/null +++ b/keyboards/handwired/minorca/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile index 4e2a6f00f..191c6bb66 100644 --- a/keyboards/handwired/onekey/Makefile +++ b/keyboards/handwired/onekey/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED - include ../../Makefile + include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk new file mode 100644 index 000000000..c6d10856a --- /dev/null +++ b/keyboards/handwired/onekey/rules.mk @@ -0,0 +1,65 @@ + + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/traveller/Makefile b/keyboards/handwired/traveller/Makefile index 12a4b71f4..191c6bb66 100644 --- a/keyboards/handwired/traveller/Makefile +++ b/keyboards/handwired/traveller/Makefile @@ -1,89 +1,3 @@ - -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# for avr upload -USB ?= /dev/cu.usbmodem1421 -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER - ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# MCU name - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -RGBLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - -upload: build - $(ATREUS_UPLOAD_COMMAND) - +endif \ No newline at end of file diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk new file mode 100644 index 000000000..12a4b71f4 --- /dev/null +++ b/keyboards/handwired/traveller/rules.mk @@ -0,0 +1,89 @@ + +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# for avr upload +USB ?= /dev/cu.usbmodem1421 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# MCU name + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +upload: build + $(ATREUS_UPLOAD_COMMAND) + diff --git a/keyboards/planck/rev3/Makefile b/keyboards/planck/rev3/Makefile index 3ed1445e4..191c6bb66 100644 --- a/keyboards/planck/rev3/Makefile +++ b/keyboards/planck/rev3/Makefile @@ -1,5 +1,3 @@ -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk new file mode 100644 index 000000000..3ed1445e4 --- /dev/null +++ b/keyboards/planck/rev3/rules.mk @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/planck/rev4/Makefile b/keyboards/planck/rev4/Makefile index ed09f85a4..191c6bb66 100644 --- a/keyboards/planck/rev4/Makefile +++ b/keyboards/planck/rev4/Makefile @@ -1,5 +1,3 @@ -AUDIO_ENABLE ?= yes # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk new file mode 100644 index 000000000..ed09f85a4 --- /dev/null +++ b/keyboards/planck/rev4/rules.mk @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file -- cgit v1.2.3 From da226e61261e0c11e678d2086c00b2a45726083e Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sat, 20 Aug 2016 03:22:16 +0300 Subject: Update keyboard readme files with new makefile instructions --- keyboards/arrow_pad/readme.md | 8 +++++--- keyboards/atomic/readme.md | 7 ++++--- keyboards/atreus/readme.md | 7 ++++--- keyboards/bantam44/readme.md | 7 ++++--- keyboards/clueboard/readme.md | 26 +++++++++++++------------- keyboards/cluecard/readme.md | 6 +++--- keyboards/ergodox/readme.md | 6 +++--- keyboards/gh60/readme.md | 8 +++++--- keyboards/hhkb/readme.md | 8 +++++--- keyboards/kc60/readme.md | 10 ++++++---- keyboards/kinesis/readme.md | 6 +++--- keyboards/planck/readme.md | 8 +++++--- keyboards/preonic/readme.md | 8 +++++--- keyboards/retro_refit/readme.md | 8 +++++--- keyboards/s60-x/readme.md | 4 ++-- keyboards/tv44/readme.md | 6 +++--- 16 files changed, 75 insertions(+), 58 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md index 5aa44cce5..2e9a64f2e 100644 --- a/keyboards/arrow_pad/readme.md +++ b/keyboards/arrow_pad/readme.md @@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/arrow_pad fol Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md index ab1e7ba1f..674dcf113 100644 --- a/keyboards/atomic/readme.md +++ b/keyboards/atomic/readme.md @@ -13,13 +13,14 @@ Download or clone the whole firmware and navigate to the keyboards/atomic folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 734f58f0f..a4077668e 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -174,13 +174,14 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md index 89d7f9d05..462f67c12 100644 --- a/keyboards/bantam44/readme.md +++ b/keyboards/bantam44/readme.md @@ -12,13 +12,14 @@ Download or clone the whole firmware and navigate to the keyboards/Bantam44 fold Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md index 6c29c09ec..4a76e2908 100644 --- a/keyboards/clueboard/readme.md +++ b/keyboards/clueboard/readme.md @@ -31,36 +31,36 @@ If you would like to use one of the alternative keymaps, or create your own, see ## Clueboard 1.0 -If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `SUBPROJECT=rev1` to your make command, like this: +If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this: ``` -$ make SUBPROJECT=rev1 +$ make rev1 ``` And when flashing your keyboard: ``` -$ make SUBPROJECT=rev1 dfu +$ make rev1-dfu ``` -If you are flashing an alternative layout to your rev1, include both `SUBPROJECT=rev1` and `KEYMAP=` in your command, for example when flashing max: +If you are flashing an alternative layout to your rev1, include both `rev1` and `` in your command, for example when flashing max: ``` -$ make SUBPROJECT=rev1 KEYMAP=max dfu +$ make rev1-max-dfu ``` ## Alternate Keymaps -There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `KEYMAP=` to your command: +There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `` to your command: ``` -$ make KEYMAP=skully +$ make skully ``` -And when flashing your keyboard, put `KEYMAP=` between "make" and "dfu": +And when flashing your keyboard, put `` between "make" and "dfu": ``` -$ make KEYMAP=skully dfu +$ make skully-dfu ``` ### Notable Layouts @@ -76,15 +76,15 @@ These layouts are notable for one reason or another. If you are looking for idea There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: * Copy `[keymaps/default](keymaps/default/)` to `keymaps/`. -* Compile the firmware (`$ make KEYMAP=`) -* Flash the firmware (`$ make KEYMAP= dfu`) +* Compile the firmware (`$ make `) +* Flash the firmware (`$ make -dfu`) * Make sure everything works like the default keyboard * Modify `keymaps//readme.md` to tell others about your layout. * Modify `keymaps//keymap.c` to reflect your desired layout. -* Compile your new custom firmware (`$ make KEYMAP=`) +* Compile your new custom firmware (`$ make `) ** If you have warnings you may flash without fixing them, but something may not work right. ** If you have any errors you must fix them before continuing. -* Flash the firmware (`$ make KEYMAP= dfu`) +* Flash the firmware (`$ make -dfu`) ## Share Your Keymap diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md index ae1afbbfd..be13fc017 100644 --- a/keyboards/cluecard/readme.md +++ b/keyboards/cluecard/readme.md @@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index f81d7cd8d..a96e415de 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -19,10 +19,10 @@ If you are just compiling an existing keymap and don't want to create your own, 3. Set up a build environment as per the readme. 4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) 5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. -6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. -7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. +6. Compile your firmware by running `make keymap_name`. For example, `make german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `infinity` to the make command like this `make infinity-german`. +7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make keymap_name-teensy`. - **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` + **Infinity ErgoDox** - Flash the firmware by running `make infinity-keymap_name-dfu-util` 8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. Good luck! :) diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md index 92302d507..20afb0db0 100644 --- a/keyboards/gh60/readme.md +++ b/keyboards/gh60/readme.md @@ -48,13 +48,15 @@ Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c fo Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md index 39d49b32a..367c0a08f 100644 --- a/keyboards/hhkb/readme.md +++ b/keyboards/hhkb/readme.md @@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md index acc0df68d..0639512dd 100644 --- a/keyboards/kc60/readme.md +++ b/keyboards/kc60/readme.md @@ -10,18 +10,20 @@ Download or clone the whole firmware and navigate to the keyboards/kc60 folder. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ## WS2812 Support ![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg) -Build with WS2812 Support by running `make KEYMAP=ws2812`. +Build with WS2812 Support by running `make ws2812`. diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md index a990f9cb9..79c86581e 100644 --- a/keyboards/kinesis/readme.md +++ b/keyboards/kinesis/readme.md @@ -27,16 +27,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md index f89fdeb93..4b24a690e 100644 --- a/keyboards/planck/readme.md +++ b/keyboards/planck/readme.md @@ -13,15 +13,17 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ### Notable forks (which some of the keymap files are from) diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md index f0be255a0..10763ee97 100644 --- a/keyboards/preonic/readme.md +++ b/keyboards/preonic/readme.md @@ -13,13 +13,15 @@ Download or clone the whole firmware and navigate to the keyboards/preonic folde Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap, create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/retro_refit/readme.md b/keyboards/retro_refit/readme.md index b01a1a9ca..77df861ce 100644 --- a/keyboards/retro_refit/readme.md +++ b/keyboards/retro_refit/readme.md @@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/retro_refit f Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md index 099d58699..94ce82922 100644 --- a/keyboards/s60-x/readme.md +++ b/keyboards/s60-x/readme.md @@ -42,9 +42,9 @@ The recommended programs for flashing your keyboard are [Atmel FLIP](http://www. ## Building the firmware -To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] + $ make [custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started). diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md index e3b557fe2..4f691a4ca 100644 --- a/keyboards/tv44/readme.md +++ b/keyboards/tv44/readme.md @@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` \ No newline at end of file -- cgit v1.2.3 From 9e03517ae51ff30d332accae27469ae3b1b25e73 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 21:47:00 -0600 Subject: Restructuring of the ergodox README. --- keyboards/ergodox/readme.md | 134 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 105 insertions(+), 29 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 1c1181dba..1627883c9 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,44 +1,121 @@ -# Infinity on Ubuntu Quickstart +# Customizing Keymap -To build an Infinity firmware under Ubuntu (tested on 15.10): +There are external tools for customizing the layout, but those do not use +the featurs of this qmk firmware. These sites include: + + - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez + - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files + +You can also find an existing firmware that you like, for example from: + + - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) + +This qmk firmware also provides the ability to customize keymaps, but requires +a toolchain to build the firmware. See below for instructions on building +firmware and customizing keymaps. + +# Customizing Keymaps + +There are many existing keymaps in the "keymaps" directory. If you just want +to use one of them, you don't need to modify keymaps and can just build and +flash the firmware as described below. These directories each have a +"readme.md" file which describe them. + +If none of the existing keymaps suit you, you can create your own custom +keymap. This will require some experience with coding. Follow these steps +to customize a keymap: + + - Read the [qmk firmware README](https://github.com/jackhumbert/qmk_firmware) from top to bottom. Then come back here. :) + + - Clone the qmk_firmware repository + + - Set up your build environment (see below). + + - Make a new directory under "keymaps" to hold your customizations. + + - Copy an existing keymap that is close to what you want, such as + "keymaps/default/keymap.c". + + - Use an editor to modify the new "keymap.c". See "Finding the keycodes you + need" below). Try to edit the comments as well, so the "text graphics" + represent your layout correctly. + + - Compile your new firmware (see below) + + - Flash your firmware (see below) + + - Test the changes. + + - Submit your keymap as a pull request to the qmk_firmware repository so + others can use it. You will want to add a "readme.md" that describes the + keymap. + +# Build Dependencies + +Before you can build, you will need the build dependencies. There is a script +to try to do this for Linux: - Run the `util/install_dependencies.sh` script as root. - - Check out the submodules with `git submodule update --init --recursive` - - Go into the ErgoDox directory with `cd keyboards/ergodox` + +For the Infinity, you need the chibios submodules to be checked out or you +will receive errors about the build process being unable to find the chibios +files. Check them out with: + + - Go to the top level repo directory and run: `git submodule update --init --recursive` + +# Flashing Firmware + +## ErgoDox Ez + +The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). + +Linux users need to modify udev rules as described on the Teensy Linux page. +Some distributions provide a binary, maybe called `teensy-loader-cli`). + +To flash the firmware: + + - Build the firmware with `make keymap=keymapname`, for example `make + keymap=default` + + - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g. + `ergodox_ez_default.hex` + + - Start the teensy loader. + + - Load the .hex file into it. + + - Press the Reset button by inserting a paperclip gently into the reset hole + in the top right corder. + + - Click the button in the Teensy app to download the firmware. + +## ErgoDox Infinity + +The Infinity is two completely independent keyboards, and needs to be flashed +for the left and right halves seperately. To flash them: + + - Remove the build directory with `rm -rf ../../.build` + - Build the firmware with `make keymap=keymapname subproject=infinity` - - Plug in the left hand keyboard only. - - Press the program button (back of keyboard, above thumb pad). - - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` - - Install the right hand firmware, but I haven't figured this out yet. -# Getting started + - Plug in the left hand keyboard only. -There are two main ways you could customize the ErgoDox (EZ and Infinity) + - Press the program button (back of keyboard, above thumb pad). -## The Easy Way: Use an existing firmware file and just flash it (ErgoDox EZ only) + - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` -1. Download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). Some Linux distributions already provide a binary (may be called `teensy-loader-cli`), so you may prefer to use this. -2. Find a firmware file you like. There are [dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) you can browse and download. You can also use the [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) to create a firmware Hex file you like. -3. Download the firmware file -4. Connect the keyboard, press its Reset button (gently insert a paperclip into the hole in the top-right corner) and flash it using the Teensy loader you installed on step 1 and the firmware you downloaded. + - Remove the left-hand build with `rm -rf ../../.build` -## More technical: compile an existing keymap, or create your own totally custom firmware by editing the source files. + - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right` -This requires a little bit of familiarity with coding. -If you are just compiling an existing keymap and don't want to create your own, you can skip step 4, 5 and 8. + - Plug in the right hand keyboard only. -1. Go to https://github.com/jackhumbert/qmk_firmware and read the readme at the base of this repository, top to bottom. Then come back here :) -2. Clone the repository (download it) -3. Set up a build environment as per the readme. -4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) -5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. -6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. -7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. + - Press the program button (back of keyboard, above thumb pad). - **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` -8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. + - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity MASTER=right` -Good luck! :) +More information on the Infinity firmware is available in the [TMK/chibios for +Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) ## Contributing your keymap @@ -49,7 +126,6 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout. - ## Finding the keycodes you need Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. -- cgit v1.2.3 From d98e5ddf30e6ced925e3d4fa705ae5449808074b Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 21:50:04 -0600 Subject: Tweaks after review. --- keyboards/ergodox/readme.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 1627883c9..349a0ce40 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,4 +1,4 @@ -# Customizing Keymap +# Keymap Options There are external tools for customizing the layout, but those do not use the featurs of this qmk firmware. These sites include: @@ -117,7 +117,7 @@ for the left and right halves seperately. To flash them: More information on the Infinity firmware is available in the [TMK/chibios for Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) -## Contributing your keymap +# Contributing your keymap The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. @@ -126,7 +126,7 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout. -## Finding the keycodes you need +# Finding the keycodes you need Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. -- cgit v1.2.3 From 0418ecc073d420fff3be2603bfb7a6fa234bd357 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Mon, 22 Aug 2016 10:26:18 -0600 Subject: Changes from review by @fredizzimo and @Xyverz --- keyboards/ergodox/readme.md | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 349a0ce40..304f2b01f 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,18 +1,3 @@ -# Keymap Options - -There are external tools for customizing the layout, but those do not use -the featurs of this qmk firmware. These sites include: - - - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez - - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files - -You can also find an existing firmware that you like, for example from: - - - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) - -This qmk firmware also provides the ability to customize keymaps, but requires -a toolchain to build the firmware. See below for instructions on building -firmware and customizing keymaps. # Customizing Keymaps @@ -94,8 +79,6 @@ To flash the firmware: The Infinity is two completely independent keyboards, and needs to be flashed for the left and right halves seperately. To flash them: - - Remove the build directory with `rm -rf ../../.build` - - Build the firmware with `make keymap=keymapname subproject=infinity` - Plug in the left hand keyboard only. @@ -104,8 +87,6 @@ for the left and right halves seperately. To flash them: - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` - - Remove the left-hand build with `rm -rf ../../.build` - - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right` - Plug in the right hand keyboard only. @@ -133,3 +114,19 @@ Let's say you want a certain key in your layout to send a colon; to figure out w That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot). If you want to send a plain vanilla key, you can look up its code under `doc/keycode.txt`. That's where all the boring keys hang out. + +# Other Firmware Options + +There are external tools for customizing the layout, but those do not use +the featurs of this qmk firmware. These sites include: + + - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez + - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files + +You can also find an existing firmware that you like, for example from: + + - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) + +This qmk firmware also provides the ability to customize keymaps, but requires +a toolchain to build the firmware. See below for instructions on building +firmware and customizing keymaps. -- cgit v1.2.3 From 7debe7cd777f50ef0adf4d3b4623946232f1eccf Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Wed, 24 Aug 2016 09:26:41 -0600 Subject: Changes based on @fredizzimo review, flashing Infinity details --- keyboards/ergodox/readme.md | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 304f2b01f..4730de36f 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,3 +1,15 @@ +# The Easy Way + +If you can find firmware someone else has made that does what you want, that +is the easiest way to customize your ErgoDox. It requires no programming +experience or the setup of a build environment. + +Quickstart: + + - Find and download an [existing firmware](#other-firmware-options) + + - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez) + or [ErgoDox Infinity](#ergodox-infinity) # Customizing Keymaps @@ -98,6 +110,28 @@ for the left and right halves seperately. To flash them: More information on the Infinity firmware is available in the [TMK/chibios for Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) +### Infinity Master/Two Halves + +The Infinity is two completely independent keyboards, that can connect together. +You have a few options in how you flash the firmware: + +- Flash the left half, rebuild the firmware with "MASTER=right" and then flash + the right half. This allows you to plug in either half directly to the + computer and is what the above instructions do. + +- Flash the left half, then flash the same firmware on the right. This only + works when the left half is plugged directly to the computer and the keymap + is mirrored. It saves the small extra step of rebuilding with + "MASTER=right". + +- The same as the previous one but with "MASTER=right" when you build the + firmware, then flash the same firmware to both halves. You just have to + directly connect the right half to the computer. + +- For minor changes such as changing only the keymap without having updated + any part of the firmware code itself, you can program only the MASTER half. + It is safest to program both halves though. + # Contributing your keymap The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. -- cgit v1.2.3 From 0dfd1712bb22be9fe63b8754eb8fe72675906c6f Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Wed, 24 Aug 2016 09:30:29 -0600 Subject: Making the existing firmware link better --- keyboards/ergodox/readme.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 4730de36f..b113ca7dd 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -6,7 +6,8 @@ experience or the setup of a build environment. Quickstart: - - Find and download an [existing firmware](#other-firmware-options) + - Find and download an existing firmware + [from Other Firmware Options](#other-firmware-options) - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez) or [ErgoDox Infinity](#ergodox-infinity) -- cgit v1.2.3 From f512179e66e4d4dfbcc92c6ba1aaa1b6cf1ef12b Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Wed, 24 Aug 2016 13:17:01 +0200 Subject: ergodox: Update algernon's keymap to v1.6 Major changes include: Base layer changes ------------------ * The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`. * The `:;` and `-_` keys are now available on the base layer, on their **ADORE** location, too, just below `[{(`/`]})`. * The `Apps` key has been replaced by `F12`. * The `-`/`_` is no longer a tap-dance key. ADORE layer changes ------------------- * Adjustments were made to the **ADORE** layer, to separate some inconvenient combinations. Miscellaneous changes --------------------- * `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. * The mouse acceleration keys on the **Navigation and Media* layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. * When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. Heatmap ------- * The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off. * The heatmap generator received a lot of updates. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/Makefile | 9 +- .../keymaps/algernon/images/adore-layer.png | Bin 93748 -> 93893 bytes .../ergodox/keymaps/algernon/images/base-layer.png | Bin 95222 -> 95204 bytes keyboards/ergodox/keymaps/algernon/keymap.c | 494 +++++++----------- keyboards/ergodox/keymaps/algernon/readme.md | 67 ++- .../algernon/tools/heatmap-adore-layout.json | 533 -------------------- .../algernon/tools/heatmap-base-layout.json | 533 -------------------- .../algernon/tools/heatmap-layout.ADORE.json | 553 +++++++++++++++++++++ .../algernon/tools/heatmap-layout.Dvorak.json | 542 ++++++++++++++++++++ .../keymaps/algernon/tools/log-to-heatmap.py | 368 +++++++++----- 10 files changed, 1564 insertions(+), 1535 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json delete mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json create mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json create mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile index 00194857a..7c2b3ad97 100644 --- a/keyboards/ergodox/keymaps/algernon/Makefile +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -1,22 +1,23 @@ BOOTMAGIC_ENABLE=no COMMAND_ENABLE=no SLEEP_LED_ENABLE=no -UNICODE_ENABLE=no FORCE_NKRO ?= yes DEBUG_ENABLE = no CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes KEYLOGGER_ENABLE ?= yes +UCIS_ENABLE = yes +MOUSEKEY_ENABLE ?= yes -ADORE_AUTOLOG ?= no +AUTOLOG_ENABLE ?= no ifeq (${FORCE_NKRO},yes) OPT_DEFS += -DFORCE_NKRO endif -ifeq (${ADORE_AUTOLOG},yes) +ifeq (${AUTOLOG_ENABLE},yes) KEYLOGGER_ENABLE = yes -OPT_DEFS += -DADORE_AUTOLOG +OPT_DEFS += -DAUTOLOG_ENABLE endif ifeq (${KEYLOGGER_ENABLE},yes) diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png index 44ad8a1eb..3d0a5fb20 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png and b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png index da159fbe2..7ea57aae3 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/base-layer.png and b/keyboards/ergodox/keymaps/algernon/images/base-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index 144030e2e..9f476d8a6 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -2,6 +2,7 @@ * algernon's ErgoDox EZ layout, please see the readme.md file! */ +#include #include "ergodox.h" #include "led.h" #include "debug.h" @@ -33,7 +34,6 @@ enum { // Buttons that do extra stuff A_GUI, A_PLVR, - A_ESC, A_MPN, // Function / number keys @@ -47,7 +47,6 @@ enum { KF_8, KF_9, KF_10, - KF_11, // =, F11 // Application select keys APP_SLK, // Slack @@ -62,6 +61,11 @@ enum { A_MDL, A_MDR, + // Mouse acceleration + A_ACL0, + A_ACL1, + A_ACL2, + // Hungarian layer keys HU_AA, // Á HU_OO, // Ó @@ -89,7 +93,6 @@ enum { enum { CT_CLN = 0, - CT_MNS, CT_TA, CT_LBP, CT_RBP @@ -102,7 +105,11 @@ uint16_t gui_timer = 0; uint16_t kf_timers[12]; #if KEYLOGGER_ENABLE +# ifdef AUTOLOG_ENABLE +bool log_enable = true; +# else bool log_enable = false; +# endif #endif bool time_travel = false; @@ -114,12 +121,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Base Layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | ~ | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | ~ | ' | , | . | P | Y | ( | | ) | F | G | C | R | L | \ | + * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| + * |-----------+------+------+------+------+------| : | | - |------+------+------+------+------+-----------| * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * | | | | | : | | - | | | | | @@ -135,21 +142,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = KEYMAP( // left hand M(A_MPN) ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC +,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,TD(CT_LBP) ,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN +,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,TD(CT_CLN) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) ,F(F_ALT),F(F_GUI) ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) + ,KC_BSPC,F(F_SFT),KC_ESC // right hand - ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS + ,KC_F12 ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP - ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_MINS ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP + ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,OSL(NMDIA),KC_DEL ,KC_LEAD @@ -159,13 +166,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 1: Adore layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | `~ | X | W | K | L | M | ( | | ) | F | H | C | P | Y | \ | + * | `~ | Y | W | G | L | M | ( | | ) | F | H | C | P | X | \ | * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | Z | Q | ' | , | . | : | | - | B | G | V | J | / | | + * | | Z | Q | ' | , | . | : | | - | B | K | V | J | / | | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * | | | | | | | | | | | | * `-----------------------------------' `-----------------------------------' @@ -180,20 +187,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [ADORE] = KEYMAP( // left hand KC_MPLY ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,KC_GRV ,KC_X ,KC_W ,KC_K ,KC_L ,KC_M ,TD(CT_LBP) +,KC_GRV ,KC_Y ,KC_W ,KC_G ,KC_L ,KC_M ,TD(CT_LBP) ,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U ,KC_NO ,KC_Z ,KC_Q ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,F(F_ALT),F(F_GUI) ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) + ,KC_BSPC,F(F_SFT),KC_ESC // right hand - ,KC_APP ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS + ,KC_F12 ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_X ,KC_BSLS ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL - ,TD(CT_MNS),KC_B ,KC_G ,KC_V ,KC_J ,KC_SLSH ,KC_NO + ,KC_MINS ,KC_B ,KC_K ,KC_V ,KC_J ,KC_SLSH ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,OSL(NMDIA),KC_DEL @@ -363,14 +370,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [NMDIA] = KEYMAP( // left hand - KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) -,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO -,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO + M(A_ACL0) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) +,M(A_ACL1) ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO +,M(A_ACL2) ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO ,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_MUTE ,KC_VOLU ,KC_VOLD - ,KC_SPC,KC_ENTER,M(A_ESC) + ,KC_SPC,KC_ENTER,KC_ESC // right hand ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO @@ -439,7 +446,7 @@ const uint16_t PROGMEM fn_actions[] = { ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) }; -void toggle_steno(int pressed) +static void toggle_steno(int pressed) { uint8_t layer = biton32(layer_state); @@ -462,7 +469,7 @@ void toggle_steno(int pressed) } } -macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) +static macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) { uint8_t need_shift = 0; uint8_t hold_shift = 0; @@ -507,46 +514,43 @@ macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) return MACRO_NONE; } -void ang_handle_kf (keyrecord_t *record, uint8_t id) +static bool from_appsel; + +static void ang_handle_kf (keyrecord_t *record, uint8_t id) { uint8_t code = id - KF_1; if (record->event.pressed) { kf_timers[code] = timer_read (); } else { - uint8_t kc; + uint8_t kc_base; - if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) { + if (from_appsel) { + from_appsel = false; + return; + } + + if (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM) { // Long press - kc = KC_F1 + code; + kc_base = KC_F1; } else { - if (id == KF_11) - kc = KC_EQL; - else - kc = KC_1 + code; + kc_base = KC_1; } + kf_timers[code] = 0; + code += kc_base; - register_code (kc); - unregister_code (kc); + register_code (code); + unregister_code (code); } } +static struct { + uint8_t idx; +} m_accel_state; + const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { switch(id) { - case A_ESC: - if (record->event.pressed) { - if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { - clear_oneshot_mods (); - } else { - register_code (KC_ESC); - } - layer_off (HUN); - } else { - unregister_code (KC_ESC); - } - break; - case A_MPN: if (record->event.pressed) { if (keyboard_report->mods & MOD_BIT(KC_LSFT) || @@ -588,6 +592,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case HU_UEE: return ang_do_hun (record, KC_EQL, KC_U); +#if MOUSEKEY_ENABLE /* Mouse movement */ case A_MUL: if (record->event.pressed) { @@ -633,6 +638,24 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) mousekey_send(); break; + case A_ACL0 ... A_ACL2: + if (record->event.pressed) { + uint8_t idx = id - A_ACL0; + if (m_accel_state.idx == id) { + mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); + m_accel_state.idx = 0; + } else { + if (m_accel_state.idx) { + mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); + m_accel_state.idx = 0; + } + mousekey_on(KC_ACL0 + idx); + m_accel_state.idx = id; + } + } + break; +#endif + /* Plover base */ case A_PLVR: toggle_steno(record->event.pressed); @@ -663,22 +686,34 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) break; case APP_SLK: + from_appsel = true; return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); case APP_EMCS: + from_appsel = true; return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END); case APP_TERM: - return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END); + from_appsel = true; + if (!record->event.pressed) { + register_code(KC_ESC); + unregister_code(KC_ESC); + wait_ms(TAPPING_TERM + 25); + register_code(KC_DEL); + unregister_code(KC_DEL); + } + break; case APP_CHRM: + from_appsel = true; return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); case APP_MSIC: + from_appsel = true; return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); /* Function keys */ - case KF_1 ... KF_11: + case KF_1 ... KF_10: ang_handle_kf (record, id); break; } @@ -686,12 +721,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; }; -uint8_t is_adore = 0; +static uint8_t is_adore = 0; // Runs just one time when the keyboard initializes. void matrix_init_user(void) { uint8_t dl; + set_unicode_input_mode(UC_LNX); + ergodox_led_all_on(); for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { ergodox_led_all_set (i); @@ -709,120 +746,38 @@ void matrix_init_user(void) { dl = eeconfig_read_default_layer (); if (dl == (1UL << ADORE)) { is_adore = 1; -#if ADORE_AUTOLOG - log_enable = true; -#endif } }; LEADER_EXTERNS(); -void ang_do_unicode (void) { - register_code (KC_RCTL); - register_code (KC_RSFT); - register_code (KC_U); - unregister_code (KC_U); - unregister_code (KC_RSFT); - unregister_code (KC_RCTL); - wait_ms (100); -} +static void ang_tap (uint8_t code, ...) { + uint8_t kc = code; + va_list ap; -void ang_tap (uint16_t codes[]) { - for (int i = 0; codes[i] != 0; i++) { - register_code (codes[i]); - unregister_code (codes[i]); - wait_ms (50); - } + va_start(ap, code); + + do { + register_code(kc); + unregister_code(kc); + wait_ms(50); + kc = va_arg(ap, int); + } while (kc != 0); + va_end(ap); } #define TAP_ONCE(code) \ register_code (code); \ unregister_code (code) -void ang_tap_dance_bp_finished (qk_tap_dance_state_t *state, void *user_data) { - bool left, parens; - - if (state->count > 2) { - state->count = 0; - return; - } - - if (state->keycode == TD(CT_LBP)) - left = true; - else - left = false; - - if (state->count == 1) - parens = false; - else - parens = true; - - if (parens) { - register_code (KC_RSFT); - if (left) { - TAP_ONCE(KC_9); - } else { - TAP_ONCE(KC_0); - } - unregister_code (KC_RSFT); - } else { - if (left) { - TAP_ONCE (KC_LBRC); - } else { - TAP_ONCE (KC_RBRC); - } - } -} - -void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_RSFT); - register_code (KC_SCLN); - } else if (state->count == 2) { - register_code (KC_SCLN); - } -} - -void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_SCLN); - unregister_code (KC_RSFT); - } else if (state->count == 2) { - unregister_code (KC_SCLN); - } -} - -void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_MINS); - } else if (state->count == 2) { - register_code (KC_RSFT); - register_code (KC_MINS); - } -} - -void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_MINS); - } else if (state->count == 2) { - unregister_code (KC_RSFT); - unregister_code (KC_MINS); - } -} - typedef struct { bool layer_toggle; bool sticky; - bool finished_once; } td_ta_state_t; -void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { +static void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - if (td_ta->finished_once) { - return; - } - if (td_ta->sticky) { td_ta->sticky = false; td_ta->layer_toggle = false; @@ -830,7 +785,6 @@ void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { return; } - td_ta->finished_once = true; if (state->count == 1 && !state->pressed) { register_code (KC_TAB); td_ta->sticky = false; @@ -842,35 +796,29 @@ void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { +static void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { td_ta_state_t *td_ta = (td_ta_state_t *) user_data; if (!td_ta->layer_toggle) unregister_code (KC_TAB); if (!td_ta->sticky) layer_off (ARRW); - - td_ta->finished_once = false; } qk_tap_dance_action_t tap_dance_actions[] = { - [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) - ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) + [CT_CLN] = ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN) ,[CT_TA] = { .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, - .user_data = (void *)&((td_ta_state_t) { false, false, false }) + .user_data = (void *)&((td_ta_state_t) { false, false }) } - ,[CT_LBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) - ,[CT_RBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) + ,[CT_LBP] = ACTION_TAP_DANCE_DOUBLE (KC_LBRC, KC_LPRN) + ,[CT_RBP] = ACTION_TAP_DANCE_DOUBLE (KC_RBRC, KC_RPRN) }; -static uint16_t uni[32]; -static uint8_t unicnt; -static bool unimagic = false; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); + bool is_arrow = false; if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) unregister_code (KC_LGUI); @@ -893,13 +841,19 @@ void matrix_scan_user(void) { ergodox_right_led_2_set (LED_BRIGHTNESS_HI); } + if (layer_state & (1UL << ARRW)) { + ergodox_right_led_1_on (); + ergodox_right_led_3_on (); + is_arrow = true; + } + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { ergodox_right_led_1_set (LED_BRIGHTNESS_HI); ergodox_right_led_1_on (); } else { ergodox_right_led_1_set (LED_BRIGHTNESS_LO); - if (layer != NMDIA && layer != PLVR && layer != ADORE) + if (layer != NMDIA && layer != PLVR && layer != ADORE && !is_arrow) ergodox_right_led_1_off (); } @@ -919,7 +873,7 @@ void matrix_scan_user(void) { ergodox_right_led_3_on (); } else { ergodox_right_led_3_set (LED_BRIGHTNESS_LO); - if (layer != HUN && layer != PLVR && layer != ADORE) + if (layer != HUN && layer != PLVR && layer != ADORE && !is_arrow) ergodox_right_led_3_off (); } @@ -936,20 +890,17 @@ void matrix_scan_user(void) { } #endif + SEQ_ONE_KEY (KC_Q) { + register_code16 (LCTL(KC_1)); + unregister_code16 (LCTL(KC_1)); + } + SEQ_ONE_KEY (KC_T) { time_travel = !time_travel; } SEQ_ONE_KEY (KC_U) { - ang_do_unicode (); - } - - SEQ_TWO_KEYS (KC_LEAD, KC_U) { - unicnt = 0; - unimagic = true; - register_code(KC_RSFT); - TAP_ONCE(KC_U); - unregister_code(KC_RSFT); + qk_ucis_start(); } SEQ_ONE_KEY (KC_V) { @@ -958,25 +909,23 @@ void matrix_scan_user(void) { SEQ_ONE_KEY (KC_L) { /* λ */ - ang_do_unicode (); - - uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0}; - ang_tap (codes); + unicode_input_start(); + register_hex(0x03bb); + unicode_input_finish(); } SEQ_ONE_KEY (KC_Y) { - uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0}; - ang_tap (codes); + ang_tap (KC_BSLS, KC_O, KC_SLSH, 0); } SEQ_ONE_KEY (KC_S) { - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + unicode_input_start(); register_hex(0xaf); unicode_input_finish(); TAP_ONCE (KC_BSLS); register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); - ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC); + unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); TAP_ONCE (KC_SLSH); - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + unicode_input_start (); register_hex(0xaf); unicode_input_finish(); } SEQ_TWO_KEYS (KC_W, KC_M) { @@ -987,8 +936,7 @@ void matrix_scan_user(void) { wait_ms (1000); - uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; - ang_tap (codes); + ang_tap (KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0); register_code (KC_LGUI); register_code (KC_UP); unregister_code (KC_UP); @@ -1013,13 +961,7 @@ void matrix_scan_user(void) { ergodox_right_led_2_off (); wait_ms (100); ergodox_right_led_1_off (); -#if ADORE_AUTOLOG - log_enable = true; -#endif } else { -#if ADORE_AUTOLOG - log_enable = false; -#endif is_adore = 0; default_layer_and (0); default_layer_or (1UL << BASE); @@ -1043,140 +985,38 @@ void matrix_scan_user(void) { static uint16_t last4[4]; -bool is_uni_seq(char *seq) { - uint8_t i; - - for (i = 0; seq[i]; i++) { - uint16_t code; - if (('1' <= seq[i]) && (seq[i] <= '9')) - code = seq[i] - '1' + KC_1; - else if (seq[i] == '0') - code = KC_0; - else - code = seq[i] - 'a' + KC_A; - - if (i > unicnt) - return false; - if (uni[i] != code) - return false; - } - - if (uni[i] == KC_ENT || uni[i] == KC_SPC) - return true; - - return false; -} - -uint16_t hex_to_keycode(uint8_t hex) -{ - if (hex == 0x0) { - return KC_0; - } else if (hex < 0xA) { - return KC_1 + (hex - 0x1); - } else { - return KC_A + (hex - 0xA); - } -} - -void register_hex(uint16_t hex) { - bool leading_zeros = true; - - for(int i = 3; i >= 0; i--) { - uint8_t digit = ((hex >> (i*4)) & 0xF); - if (digit != 0) - leading_zeros = false; - else if (leading_zeros) - continue; - register_code(hex_to_keycode(digit)); - unregister_code(hex_to_keycode(digit)); - wait_ms(10); - } -} - -typedef struct { - char *symbol; - uint16_t codes[4]; -} qk_ucis_symbol_t; - -static qk_ucis_symbol_t ucis_symbol_table[] = { - {"poop", {0x1, 0xf4a9, 0}}, - {"rofl", {0x1, 0xf923, 0}}, - {"kiss", {0x1, 0xf619, 0}}, - {"snowman", {0x2603, 0}}, - {NULL, {}} -}; - -bool process_record_ucis (uint16_t keycode, keyrecord_t *record) { - uint8_t i; - - if (!unimagic) - return true; - - if (!record->event.pressed) - return true; - - uni[unicnt] = keycode; - unicnt++; - - if (keycode == KC_BSPC) { - if (unicnt >= 2) { - unicnt-= 2; - return true; - } else { - unicnt--; - return false; - } - } - - if (keycode == KC_ENT || keycode == KC_SPC) { - bool symbol_found = false; - - for (i = unicnt; i > 0; i--) { - register_code (KC_BSPC); - unregister_code (KC_BSPC); - wait_ms(10); - } - - ang_do_unicode(); - wait_ms(10); - for (i = 0; ucis_symbol_table[i].symbol; i++) { - if (is_uni_seq (ucis_symbol_table[i].symbol)) { - symbol_found = true; - for (uint8_t j = 0; ucis_symbol_table[i].codes[j]; j++) { - register_hex(ucis_symbol_table[i].codes[j]); - } - break; - } - } - if (!symbol_found) { - for (i = 0; i < unicnt - 1; i++) { - uint8_t code; - - if (uni[i] > KF_1) - code = uni[i] - KF_1 + KC_1; - else - code = uni[i]; - TAP_ONCE(code); - wait_ms (10); - } - } - - unimagic = false; - return true; - } - return true; -} +const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE +( + UCIS_SYM("poop", 0x1f4a9), + UCIS_SYM("rofl", 0x1f923), + UCIS_SYM("kiss", 0x1f619), + UCIS_SYM("snowman", 0x2603), + UCIS_SYM("coffee", 0x2615), + UCIS_SYM("heart", 0x2764), + UCIS_SYM("bolt", 0x26a1) +); bool process_record_user (uint16_t keycode, keyrecord_t *record) { #if KEYLOGGER_ENABLE if (log_enable) { - xprintf ("KL: col=%d, row=%d\n", record->event.key.col, - record->event.key.row); + xprintf ("KL: col=%02d, row=%02d, pressed=%d, layer=%s\n", record->event.key.col, + record->event.key.row, record->event.pressed, (is_adore) ? "ADORE" : "Dvorak"); } #endif - if (!process_record_ucis (keycode, record)) - return false; + if (keycode == KC_ESC && record->event.pressed) { + bool queue = true; + + if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { + clear_oneshot_mods (); + queue = false; + } + if (layer_state & (1UL<event.pressed) { uint8_t p; @@ -1188,15 +1028,13 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) { last4[3] = keycode; if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { - uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0}; - ang_tap (codes); + ang_tap (KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0); register_code (KC_RSFT); register_code (KC_EQL); unregister_code (KC_EQL); unregister_code (KC_RSFT); - uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0}; - ang_tap (codes2); + ang_tap (KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0); return false; } @@ -1204,3 +1042,17 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) { return true; } + +void qk_ucis_symbol_fallback (void) { + for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { + uint8_t code; + + if (qk_ucis_state.codes[i] > KF_1) + code = qk_ucis_state.codes[i] - KF_1 + KC_1; + else + code = qk_ucis_state.codes[i]; + register_code(code); + unregister_code(code); + wait_ms (10); + } +} diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 26dfddbe6..5e7adb332 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -3,11 +3,15 @@ algernon's layout ======================= -This is an unconventional layout for the ErgoDox EZ. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. +This is an unconventional layout for the [ErgoDox EZ][ez]. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. + [ez]: https://ergodox-ez.com/ [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/ -Some of the things in the layout only work when one uses Spacemacs and GNOME under Linux. Your mileage may vary. +Some of the things in the layout only work when one uses [Spacemacs][spacemacs] and [GNOME][gnome] under Linux. Your mileage may vary. + + [spacemacs]: http://spacemacs.org/ + [gnome]: https://www.gnome.org/ ## Table of Contents @@ -40,10 +44,10 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. * The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle. -* When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key. +* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap. * Tapping the `:` key once yields `:`, tapping it twice yields `;`. +* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`. * The **Lead** key allows me to type in a sequence of keys, and trigger some actions: - - `LEAD u` enters unicode input mode, by sending the GTK+ key sequence that does this. - `LEAD l` uses the unicode input method to enter a `λ`. - `LEAD s` does a lot of magic to type in a shruggie: `¯\_(ツ)_/¯` - `LEAD y` types `\o/`. @@ -52,7 +56,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest - `LEAD v` prints the firmware version, the keyboard and the keymap. - `LEAD d` toggles logging keypress positions to the HID console. - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. - - `LEAD LEAD u` enters the [Unicode symbol input][#unicode-symbol-input] mode. + - `LEAD u` enters the [Unicode symbol input](#unicode-symbol-input) mode. ## ADORE layer @@ -91,6 +95,7 @@ For the layers, the following rules apply: * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. +* When the **ARROW** layer is active, the *red* and *blue* ones are on. * For the [Steno layer](#steno-layer), all LEDs will be turned on. Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. @@ -116,7 +121,7 @@ This is an experimental feature, and may or may not work reliably. When the keypress logging functionality is enabled (by `LEAD d`), the keyboard will output a line every time a key is pressed, containing the position of the key in the matrix. This allows one to collect this information, and build analytics over it, such as a heat map, including dead keys too. -Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, simply point `tools/log-to-heatmap.py` to a base layout file (one is included in the `tools/` directory), and the key position log. The latter one can create by running `hid-listen`, and redirecting its output to a file. +Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, either pipe the output of `hid_listen` into it, or pipe it an already saved log, and it will save the results into files in an output directory (given on the command-line). See the output of `tools/log-to-heatmap.py --help` for more information. [kle]: http://www.keyboard-layout-editor.com/ @@ -151,7 +156,35 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the # Changelog -## v1.5 - 2016-08-12 +## v1.6 + +*2016-08-24* + +### Base layer changes + +* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`. +* The `:;` and `-_` keys are now available on the base layer, on their [ADORE](#adore-layer) location, too, just below `[{(`/`]})`. +* The `Apps` key has been replaced by `F12`. +* The `-`/`_` is no longer a tap-dance key. + +### ADORE layer changes + +* Adjustments were made to the [ADORE](#adore-layer) layer, to separate some inconvenient combinations. + +### Miscellaneous changes + +* `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. +* The mouse acceleration keys on the [Navigation and Media](#navigation-and-media-layer) layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. +* When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. + +### Heatmap + +* The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off. +* The heatmap generator received a lot of updates. + +## v1.5 + +*2016-08-12* * The **1HAND** layer has been removed. * A `Delete` key is now available on the right thumb cluster. @@ -161,7 +194,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * On the **ARROW** layer, `Backspace` has been replaced by `Enter`. * There is some experimental support for entering Unicode symbols. -## v1.4 - 2016-07-29 +## v1.4 + +*2016-07-29* * When toggling the key logging on or off, the LEDs will do a little dance. * The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it. @@ -169,14 +204,18 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * The `-`/`_` key was turned into a tap-dance key too. * There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`. -## v1.3 - 2016-07-06 +## v1.3 + +*2016-07-06* * Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs. * The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are. * The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now. * Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot. -## v1.2 - 2016-06-22 +## v1.2 + +*2016-06-22* * The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows). * The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted. @@ -187,7 +226,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped. * The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers. -## v1.1 - 2016-06-14 +## v1.1 + +*2016-06-14* * The keyboard starts in NKRO mode, bootmagic and other things are disabled. * A [Steno](#steno-layer) layer was added, to be used with Plover. @@ -201,7 +242,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the - `:` now inputs `;` when shifted. * `ESC` cancels the [Hungarian](#hungarian-layer) layer too, not just modifiers. -## v1.0 - 2016-05-26 +## v1.0 + +*2016-05-26* Initial version. diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json deleted file mode 100644 index 544f61ce8..000000000 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json +++ /dev/null @@ -1,533 +0,0 @@ -[ - { - "backcolor": "#ffffff", - "name": "ErgoDox - algernon's layout: Heatmap", - "author": "Gergely Nagy ", - "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", - "switchMount": "cherry", - "switchBrand": "gateron", - "switchType": "KS-3-Tea", - "pcb": true, - "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" - }, - [ - { - "x": 3.5, - "c": "#a7d0db", - "fa": [ - 0, - 0, - 2 - ] - }, - "#\n3\nF3", - { - "x": 10.5, - "c": "#a7d0db", - "t": "#000000", - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - "*\n8\nF8" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "@\n2\nF2", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "$\n4\nF4", - { - "x": 8.5 - }, - "&\n7\nF7", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "(\n9\nF9" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "%\n5\nF5", - { - "c": "#f9cd31", - "a": 7, - "f": 2 - }, - "STENO", - { - "x": 4.5, - "f": 6 - }, - "", - { - "c": "#7adabd", - "a": 4, - "f": 3, - "fa": [ - 0, - 0, - 2 - ] - }, - "^\n6\nF6" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "f": 3, - "w": 1.5 - }, - "\n\n~\n`", - { - "t": "#0d0d0b" - }, - "!\n1\nF1", - { - "x": 14.5 - }, - ")\n0\nF10", - { - "a": 7, - "w": 1.5 - }, - "F11" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 6 - }, - "L", - { - "x": 10.5 - }, - "C" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", - "a": 4 - }, - ">\n.", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "a": 6 - }, - "W", - { - "x": 8.5 - }, - "H", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "P" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "M", - { - "c": "#93c9b7", - "a": 4, - "h": 1.5 - }, - "{\n[", - { - "x": 4.5, - "h": 1.5 - }, - "}\n]", - { - "c": "#7adabd", - "a": 6 - }, - "F" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "t": "#0d0d0b", - "f": 6, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "a": 4, - "f": 3 - }, - "<\n,", - { - "x": 14.5, - "a": 6 - }, - "Y", - { - "a": 4, - "w": 1.5 - }, - "|\n\\" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 6 - }, - "E", - { - "x": 10.5 - }, - "T" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "O", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "n": true - }, - "I", - { - "x": 8.5, - "n": true - }, - "R", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "N" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "U", - { - "x": 6.5 - }, - "D" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "t": "#0d0d0b", - "fa": [ - 6 - ], - "w": 1.5 - }, - "\n\nTab", - { - "f": 3 - }, - "A", - { - "x": 14.5, - "f": 3 - }, - "S", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 6 - ], - "w": 1.5 - }, - "+\n=" - ], - [ - { - "y": -0.625, - "x": 6.5, - "c": "#93c9b7", - "t": "#000000", - "a": 7, - "h": 1.5 - }, - "(", - { - "x": 4.5, - "h": 1.5 - }, - ")" - ], - [ - { - "y": -0.75, - "x": 3.5, - "c": "#a7d0db", - "a": 4, - "f": 3 - }, - "\"\n'", - { - "x": 10.5 - }, - "V" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "Z", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "K", - { - "x": 8.5 - }, - "G", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "J" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "X", - { - "x": 6.5 - }, - "B" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "f": 9, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "t": "#0d0d0b", - "a": 4, - "f": 3 - }, - "?\n/", - { - "x": 14.5, - "a": 6 - }, - "Q", - { - "c": "#ffb07b", - "t": "#000000", - "f": 9, - "w": 1.5 - }, - "" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#d9dae0", - "g": true, - "a": 7, - "f": 3 - }, - "", - { - "x": 10.5 - }, - "" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "", - { - "x": 1, - "c": "#d4872a", - "g": false, - "a": 5 - }, - ";\n:", - { - "x": 8.5 - }, - "_\n-", - { - "x": 1, - "c": "#d9dae0", - "g": true, - "a": 7 - }, - "" - ], - [ - { - "y": -0.75, - "x": 0.5 - }, - "", - {}, - "", - { - "x": 14.5 - }, - "", - {}, - "" - ], - [ - { - "r": 30, - "rx": 6.5, - "ry": 4.25, - "y": -1, - "x": 1, - "c": "#f9cd31", - "g": false - }, - "Alt", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 9 - ] - }, - "\n\n\n" - ], - [ - { - "c": "#d4872a", - "a": 7, - "f": 9, - "h": 2 - }, - "", - { - "h": 2 - }, - "", - { - "c": "#f9cd31", - "f": 3 - }, - "Ctrl" - ], - [ - { - "x": 2, - "c": "#e26757" - }, - "ESC" - ], - [ - { - "r": -30, - "rx": 13, - "y": -1, - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "MEDIA", - {}, - "1HAND" - ], - [ - { - "x": -3 - }, - "LEAD", - { - "c": "#d4872a", - "f": 9, - "h": 2 - }, - "", - { - "f": 3, - "h": 2 - }, - "SPC" - ], - [ - { - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "HUN" - ] -] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json deleted file mode 100644 index 148bb1f23..000000000 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json +++ /dev/null @@ -1,533 +0,0 @@ -[ - { - "backcolor": "#ffffff", - "name": "ErgoDox - algernon's layout: Heatmap", - "author": "Gergely Nagy ", - "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", - "switchMount": "cherry", - "switchBrand": "gateron", - "switchType": "KS-3-Tea", - "pcb": true, - "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" - }, - [ - { - "x": 3.5, - "c": "#a7d0db", - "fa": [ - 0, - 0, - 2 - ] - }, - "#\n3\nF3", - { - "x": 10.5, - "c": "#a7d0db", - "t": "#000000", - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - "*\n8\nF8" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "@\n2\nF2", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "$\n4\nF4", - { - "x": 8.5 - }, - "&\n7\nF7", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "(\n9\nF9" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "%\n5\nF5", - { - "c": "#f9cd31", - "a": 7, - "f": 2 - }, - "STENO", - { - "x": 4.5, - "f": 6 - }, - "", - { - "c": "#7adabd", - "a": 4, - "f": 3, - "fa": [ - 0, - 0, - 2 - ] - }, - "^\n6\nF6" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "f": 3, - "w": 1.5 - }, - "\n\n~\n`", - { - "t": "#0d0d0b" - }, - "!\n1\nF1", - { - "x": 14.5 - }, - ")\n0\nF10", - { - "a": 7, - "w": 1.5 - }, - "F11" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 4 - }, - ">\n.", - { - "x": 10.5, - "a": 6 - }, - "C" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", - "a": 4 - }, - "<\n,", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "a": 6 - }, - "P", - { - "x": 8.5 - }, - "G", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "R" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "Y", - { - "c": "#93c9b7", - "a": 4, - "h": 1.5 - }, - "{\n[", - { - "x": 4.5, - "h": 1.5 - }, - "}\n]", - { - "c": "#7adabd", - "a": 6 - }, - "F" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "t": "#0d0d0b", - "f": 6, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "a": 4, - "f": 3 - }, - "\"\n'", - { - "x": 14.5, - "a": 6 - }, - "L", - { - "a": 4, - "w": 1.5 - }, - "|\n\\" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 6 - }, - "E", - { - "x": 10.5 - }, - "T" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "O", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "n": true - }, - "U", - { - "x": 8.5, - "n": true - }, - "H", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "N" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "I", - { - "x": 6.5 - }, - "D" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "t": "#0d0d0b", - "fa": [ - 6 - ], - "w": 1.5 - }, - "\n\nTab", - { - "f": 3 - }, - "A", - { - "x": 14.5, - "f": 3 - }, - "S", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 6 - ], - "w": 1.5 - }, - "+\n=" - ], - [ - { - "y": -0.625, - "x": 6.5, - "c": "#93c9b7", - "t": "#000000", - "a": 7, - "h": 1.5 - }, - "(", - { - "x": 4.5, - "h": 1.5 - }, - ")" - ], - [ - { - "y": -0.75, - "x": 3.5, - "c": "#a7d0db", - "a": 6 - }, - "J", - { - "x": 10.5 - }, - "W" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "Q", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "K", - { - "x": 8.5 - }, - "M", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "V" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "X", - { - "x": 6.5 - }, - "B" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "f": 9, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "t": "#0d0d0b", - "a": 4, - "f": 3 - }, - "?\n/", - { - "x": 14.5, - "a": 6 - }, - "Z", - { - "c": "#ffb07b", - "t": "#000000", - "f": 9, - "w": 1.5 - }, - "" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#d9dae0", - "g": true, - "a": 7, - "f": 3 - }, - "", - { - "x": 10.5 - }, - "" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "", - { - "x": 1, - "c": "#d4872a", - "g": false, - "a": 5 - }, - ";\n:", - { - "x": 8.5 - }, - "_\n-", - { - "x": 1, - "c": "#d9dae0", - "g": true, - "a": 7 - }, - "" - ], - [ - { - "y": -0.75, - "x": 0.5 - }, - "", - {}, - "", - { - "x": 14.5 - }, - "", - {}, - "" - ], - [ - { - "r": 30, - "rx": 6.5, - "ry": 4.25, - "y": -1, - "x": 1, - "c": "#f9cd31", - "g": false - }, - "Alt", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 9 - ] - }, - "\n\n\n" - ], - [ - { - "c": "#d4872a", - "a": 7, - "f": 9, - "h": 2 - }, - "", - { - "h": 2 - }, - "", - { - "c": "#f9cd31", - "f": 3 - }, - "Ctrl" - ], - [ - { - "x": 2, - "c": "#e26757" - }, - "ESC" - ], - [ - { - "r": -30, - "rx": 13, - "y": -1, - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "MEDIA", - {}, - "1HAND" - ], - [ - { - "x": -3 - }, - "LEAD", - { - "c": "#d4872a", - "f": 9, - "h": 2 - }, - "", - { - "f": 3, - "h": 2 - }, - "SPC" - ], - [ - { - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "HUN" - ] -] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json new file mode 100644 index 000000000..4dfa877a7 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json @@ -0,0 +1,553 @@ +[ + { + "backcolor": "#ffffff", + "name": "ErgoDox - algernon's layout: Heatmap", + "author": "Gergely Nagy ", + "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea", + "pcb": true, + "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" + }, + [ + { + "x": 3.5, + "c": "#a7d0db", + "fa": [ + 0, + 0, + 2 + ] + }, + "#\n3\nF3", + { + "x": 10.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "*\n8\nF8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "@\n2\nF2", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "$\n4\nF4", + { + "x": 8.5 + }, + "&\n7\nF7", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "(\n9\nF9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "%\n5\nF5", + { + "c": "#f9cd31", + "a": 7, + "f": 2 + }, + "STENO", + { + "x": 4.5, + "f": 3 + }, + "F12", + { + "c": "#7adabd", + "a": 4, + "f": 3, + "fa": [ + 0, + 0, + 2 + ] + }, + "^\n6\nF6" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "f": 9, + "a": 6, + "w": 1.5 + }, + "\n\n", + { + "t": "#0d0d0b", + "f": 3, + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "!\n1\nF1", + { + "x": 14.5 + }, + ")\n0\nF10", + { + "a": 7, + "w": 1.5 + }, + "F11" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "G", + { + "x": 10.5 + }, + "C" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 6 + }, + "W", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 6 + }, + "L", + { + "x": 8.5 + }, + "H", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "P" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "M", + { + "c": "#93c9b7", + "a": 4, + "fa": [0, 0, 0], + "h": 1.5 + }, + "{\n(\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n)\n]", + { + "c": "#7adabd", + "a": 6 + }, + "F" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "t": "#0d0d0b", + "f": 3, + "a": 4, + "w": 1.5 + }, + "\n\n~\n`", + { + "c": "#ffb2d2", + "a": 6, + "f": 3 + }, + "Y", + { + "x": 14.5, + "a": 6 + }, + "X", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "E", + { + "x": 10.5 + }, + "T" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "O", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "n": true + }, + "I", + { + "x": 8.5, + "n": true + }, + "R", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "N" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "U", + { + "x": 6.5 + }, + "D" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "t": "#0d0d0b", + "fa": [ + 6 + ], + "w": 1.5 + }, + "\n\nTab", + { + "f": 3 + }, + "A", + { + "x": 14.5, + "f": 3 + }, + "S", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 6 + ], + "w": 1.5 + }, + "+\n=" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#93c9b7", + "t": "#000000", + "h": 1.5 + }, + ";\n:", + { + "x": 4.5, + "h": 1.5 + }, + "_\n-" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#a7d0db", + "a": 4, + "f": 3 + }, + "\"\n'", + { + "x": 10.5, + "a": 6, + "f": 3 + }, + "V" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 6 + }, + "Q", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 4 + }, + "<\n,", + { + "x": 8.5, + "a": 6 + }, + "K", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "J" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000", + "a": 4 + }, + ">\n.", + { + "x": 6.5, + "a": 6 + }, + "B" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "f": 9, + "w": 1.5, + "g": true + }, + "", + { + "c": "#ffb2d2", + "t": "#0d0d0b", + "a": 6, + "f": 3, + "g": false + }, + "Z", + { + "x": 14.5, + "a": 4 + }, + "?\n/", + { + "c": "#ffb07b", + "t": "#000000", + "f": 9, + "g": true, + "w": 1.5, + "a": 4 + }, + "" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#d9dae0", + "g": true, + "a": 7, + "f": 3 + }, + "", + { + "x": 10.5 + }, + "" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "", + { + "x": 1, + "c": "#d4872a", + "g": true, + "a": 5 + }, + "", + { + "x": 8.5 + }, + "", + { + "x": 1, + "c": "#d9dae0", + "g": true, + "a": 7 + }, + "" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "", + {}, + "", + { + "x": 14.5 + }, + "", + {}, + "" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#f9cd31", + "g": false + }, + "Alt", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 9 + ] + }, + "\n\n\n" + ], + [ + { + "c": "#d4872a", + "a": 7, + "f": 9, + "h": 2 + }, + "", + { + "h": 2 + }, + "", + { + "c": "#f9cd31", + "f": 3 + }, + "Ctrl" + ], + [ + { + "x": 2, + "c": "#e26757" + }, + "ESC" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "MEDIA", + {}, + "DEL" + ], + [ + { + "x": -3 + }, + "HUN", + { + "c": "#d4872a", + "f": 9, + "h": 2 + }, + "", + { + "f": 3, + "h": 2 + }, + "SPC" + ], + [ + { + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "LEAD" + ] +] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json new file mode 100644 index 000000000..1248d36af --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json @@ -0,0 +1,542 @@ +[ + { + "backcolor": "#ffffff", + "name": "ErgoDox - algernon's layout: Heatmap", + "author": "Gergely Nagy ", + "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea", + "pcb": true, + "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" + }, + [ + { + "x": 3.5, + "c": "#a7d0db", + "fa": [ + 0, + 0, + 2 + ] + }, + "#\n3\nF3", + { + "x": 10.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "*\n8\nF8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "@\n2\nF2", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "$\n4\nF4", + { + "x": 8.5 + }, + "&\n7\nF7", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "(\n9\nF9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "%\n5\nF5", + { + "c": "#f9cd31", + "a": 7, + "f": 2 + }, + "STENO", + { + "x": 4.5, + "f": 3 + }, + "F12", + { + "c": "#7adabd", + "a": 4, + "f": 3, + "fa": [ + 0, + 0, + 2 + ] + }, + "^\n6\nF6" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "f": 6, + "a": 6, + "w": 1.5 + }, + "\n\n", + { + "f": 3, + "t": "#0d0d0b", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + + }, + "!\n1\nF1", + { + "x": 14.5 + }, + ")\n0\nF10", + { + "a": 7, + "w": 1.5 + }, + "F11" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4 + }, + ">\n.", + { + "x": 10.5, + "a": 6 + }, + "C" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 4 + }, + "<\n,", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 6 + }, + "P", + { + "x": 8.5 + }, + "G", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "R" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "Y", + { + "c": "#93c9b7", + "a": 4, + "h": 1.5 + }, + "{\n(\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n)\n]", + { + "c": "#7adabd", + "a": 6 + }, + "F" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "t": "#0d0d0b", + "f": 3, + "w": 1.5 + }, + "\n\n~\n`", + { + "c": "#ffb2d2", + "a": 4, + "f": 3 + }, + "\"\n'", + { + "x": 14.5, + "a": 6 + }, + "L", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "E", + { + "x": 10.5 + }, + "T" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "O", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "n": true + }, + "U", + { + "x": 8.5, + "n": true + }, + "H", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "N" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "I", + { + "x": 6.5 + }, + "D" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "t": "#0d0d0b", + "fa": [ + 6 + ], + "w": 1.5 + }, + "\n\nTab", + { + "f": 3 + }, + "A", + { + "x": 14.5, + "f": 3 + }, + "S", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 6 + ], + "w": 1.5 + }, + "+\n=" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#93c9b7", + "t": "#000000", + "a": 7, + "h": 1.5 + }, + "(", + { + "x": 4.5, + "h": 1.5 + }, + ")" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#a7d0db", + "a": 6 + }, + "J", + { + "x": 10.5 + }, + "W" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "Q", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "K", + { + "x": 8.5 + }, + "M", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "V" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "X", + { + "x": 6.5 + }, + "B" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "f": 9, + "w": 1.5 + }, + "\n\n", + { + "c": "#ffb2d2", + "t": "#0d0d0b", + "a": 4, + "f": 3 + }, + "?\n/", + { + "x": 14.5, + "a": 6 + }, + "Z", + { + "c": "#ffb07b", + "t": "#000000", + "f": 9, + "w": 1.5 + }, + "" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#d9dae0", + "g": true, + "a": 7, + "f": 3 + }, + "", + { + "x": 10.5 + }, + "" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "", + { + "x": 1, + "c": "#d4872a", + "g": false, + "a": 5 + }, + ";\n:", + { + "x": 8.5 + }, + "_\n-", + { + "x": 1, + "c": "#d9dae0", + "g": true, + "a": 7 + }, + "" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "", + {}, + "", + { + "x": 14.5 + }, + "", + {}, + "" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#f9cd31", + "g": false + }, + "Alt", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 9 + ] + }, + "\n\n\n" + ], + [ + { + "c": "#d4872a", + "a": 7, + "f": 9, + "h": 2 + }, + "", + { + "h": 2 + }, + "", + { + "c": "#f9cd31", + "f": 3 + }, + "Ctrl" + ], + [ + { + "x": 2, + "c": "#e26757" + }, + "ESC" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "MEDIA", + {}, + "DEL" + ], + [ + { + "x": -3 + }, + "LEAD", + { + "c": "#d4872a", + "f": 9, + "h": 2 + }, + "", + { + "f": 3, + "h": 2 + }, + "SPC" + ], + [ + { + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "HUN" + ] +] diff --git a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py index a13d12e81..68585843b 100755 --- a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py +++ b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py @@ -3,143 +3,247 @@ import json import os import sys import re +import argparse from math import floor +from os.path import dirname + +class Heatmap(object): + coords = [ + [ + # Row 0 + [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], + [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], + ], + [ + # Row 1 + [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], + [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], + ], + [ + # Row 2 + [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], + [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], + ], + [ + # Row 3 + [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], + [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], + ], + [ + # Row 4 + [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], + [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], + ], + [ + # Row 5 + [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], + [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], + ], + ] + + def set_attr_at(self, block, n, attr, fn, val): + blk = self.heatmap[block][n] + if attr in blk: + blk[attr] = fn(blk[attr], val) + else: + blk[attr] = fn(None, val) + + def coord(self, col, row): + return self.coords[row][col] + + @staticmethod + def set_attr(orig, new): + return new + + def set_bg(self, (block, n), color): + self.set_attr_at(block, n, "c", self.set_attr, color) + #self.set_attr_at(block, n, "g", self.set_attr, False) + + def set_tap_info(self, (block, n), count, cap): + def _set_tap_info(o, _count, _cap): + ns = 4 - o.count ("\n") + return o + "\n" * ns + "%.02f%%" % (float(_count) / float(_cap) * 100) + + if not cap: + cap = 1 + self.heatmap[block][n + 1] = _set_tap_info (self.heatmap[block][n + 1], count, cap) + + @staticmethod + def heatmap_color (v): + colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] + fb = 0 + if v <= 0: + idx1, idx2 = 0, 0 + elif v >= 1: + idx1, idx2 = len(colors) - 1, len(colors) - 1 + else: + val = v * (len(colors) - 1) + idx1 = int(floor(val)) + idx2 = idx1 + 1 + fb = val - float(idx1) + + r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] + g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] + b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] + + r, g, b = [x * 255 for x in r, g, b] + return "#%02x%02x%02x" % (r, g, b) + + def __init__(self, layout): + self.log = {} + self.total = 0 + self.max_cnt = 0 + self.layout = layout + + def update_log(self, (c, r)): + if not (c, r) in self.log: + self.log[(c, r)] = 0 + self.log[(c, r)] = self.log[(c, r)] + 1 + self.total = self.total + 1 + if self.max_cnt < self.log[(c, r)]: + self.max_cnt = self.log[(c, r)] + + def get_heatmap(self): + with open("%s/heatmap-layout.%s.json" % (dirname(sys.argv[0]), self.layout), "r") as f: + self.heatmap = json.load (f) + + ## Reset colors + for row in self.coords: + for coord in row: + if coord != []: + self.set_bg (coord, "#d9dae0") + + for (c, r) in self.log: + coords = self.coord(c, r) + b, n = coords + cap = self.max_cnt + if cap == 0: + cap = 1 + v = float(self.log[(c, r)]) / cap + self.set_bg (coords, self.heatmap_color (v)) + self.set_tap_info (coords, self.log[(c, r)], self.total) + return self.heatmap + + def get_stats(self): + usage = [ + # left hand + [0, 0, 0, 0, 0], + # right hand + [0, 0, 0, 0, 0] + ] + finger_map = [0, 0, 1, 2, 3, 4, 4] + for (c, r) in self.log: + if r == 5: # thumb cluster + if c <= 6: # left side + usage[0][4] = usage[0][4] + self.log[(c, r)] + else: + usage[1][4] = usage[1][4] + self.log[(c, r)] + else: + fc = c + hand = 0 + if fc >= 7: + fc = fc - 7 + hand = 1 + fm = finger_map[fc] + usage[hand][fm] = usage[hand][fm] + self.log[(c, r)] + hand_usage = [0, 0] + for f in usage[0]: + hand_usage[0] = hand_usage[0] + f + for f in usage[1]: + hand_usage[1] = hand_usage[1] + f + + total = self.total + if total == 0: + total = 1 + stats = { + "hands": { + "left": { + "usage": float(hand_usage[0]) / total * 100, + "fingers": { + "0 - pinky": 0, + "1 - ring": 0, + "2 - middle": 0, + "3 - index": 0, + "4 - thumb": 0, + } + }, + "right": { + "usage": float(hand_usage[1]) / total * 100, + "fingers": { + "0 - thumb": 0, + "1 - index": 0, + "2 - middle": 0, + "3 - ring": 0, + "4 - pinky": 0, + } + }, + } + } + + hmap = ['left', 'right'] + fmap = ['0 - pinky', '1 - ring', '2 - middle', '3 - index', '4 - thumb', + '0 - thumb', '1 - index', '2 - middle', '3 - ring', '4 - pinky'] + for hand_idx in range(len(usage)): + hand = usage[hand_idx] + for finger_idx in range(len(hand)): + stats['hands'][hmap[hand_idx]]['fingers'][fmap[finger_idx + hand_idx * 5]] = float(hand[finger_idx]) / total * 100 + return stats + +def dump_all(out_dir, heatmaps): + for layer in heatmaps.keys(): + if len(heatmaps[layer].log) == 0: + continue -cr_coord_map = [ - [ - # Row 0 - [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], - [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], - ], - [ - # Row 1 - [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], - [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], - ], - [ - # Row 2 - [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], - [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], - ], - [ - # Row 3 - [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], - [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], - ], - [ - # Row 4 - [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], - [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], - ], - [ - # Row 5 - [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], - [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], - ], -] - -def set_attr_at(j, b, n, attr, fn, val): - blk = j[b][n] - if attr in blk: - blk[attr] = fn(blk[attr], val) - else: - blk[attr] = fn(None, val) - -def coord(col, row): - return cr_coord_map[row][col] - -def set_attr(orig, new): - return new - -def set_bg(j, (b, n), color): - set_attr_at(j, b, n, "c", set_attr, color) - #set_attr_at(j, b, n, "g", set_attr, False) - -def _set_tap_info(o, count, cap): - ns = 4 - o.count ("\n") - return o + "\n" * ns + "%.02f%%" % (float(count) / float(cap) * 100) - -def set_tap_info(j, (b, n), count, cap): - j[b][n + 1] = _set_tap_info (j[b][n + 1], count, cap) - -def heatmap_color (v): - colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] - fb = 0 - if v <= 0: - idx1, idx2 = 0, 0 - elif v >= 1: - idx1, idx2 = len(colors) - 1, len(colors) - 1 - else: - val = v * (len(colors) - 1) - idx1 = int(floor(val)) - idx2 = idx1 + 1 - fb = val - float(idx1) - - r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] - g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] - b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] - - r, g, b = [x * 255 for x in r, g, b] - return "#%02x%02x%02x" % (r, g, b) - -# Load the keylog -def load_keylog(fname, restrict_row): - keylog = {} - total = 0 - with open(fname, "r") as f: - lines = f.readlines() - for line in lines: - m = re.search ('KL: col=(\d+), row=(\d+)', line) + with open ("%s/%s.json" % (out_dir, layer), "w") as f: + json.dump(heatmaps[layer].get_heatmap(), f) + print >>sys.stderr, "%s stats:" % (layer) + json.dump (heatmaps[layer].get_stats(), sys.stderr, + indent = 4, sort_keys = True) + print >>sys.stderr, "" + print >>sys.stderr, "" + +def main(opts): + + heatmaps = {"Dvorak": Heatmap("Dvorak"), + "ADORE": Heatmap("ADORE") + } + cnt = 0 + restrict_row = opts.restrict_row + out_dir = opts.outdir + + while True: + line = sys.stdin.readline() + if not line: + break + m = re.search ('KL: col=(\d+), row=(\d+), pressed=(\d+), layer=(.*)', line) if not m: continue - (c, r) = (int(m.group (2)), int(m.group (1))) - if restrict_row != None and r != int(restrict_row): + + cnt = cnt + 1 + (c, r, l) = (int(m.group (2)), int(m.group (1)), m.group (4)) + if restrict_row != -1 and r != restrict_row: + continue + if c in opts.ignore_columns: continue - if (c, r) in keylog: - keylog[(c, r)] = keylog[(c, r)] + 1 - else: - keylog[(c, r)] = 1 - total = total + 1 - return total / 2, keylog - -def l_flat(s): - f = s.split("\n") - return ", ".join (f) - -def main(base_fn, log_fn, restrict_row = None): - - with open(base_fn, "r") as f: - layout = json.load (f) - - ## Reset colors - for row in cr_coord_map: - for col in row: - if col != []: - set_bg (layout, col, "#d9dae0") - #set_attr_at (layout, col[0], col[1], "g", set_attr, True) - - total, log = load_keylog (log_fn, restrict_row) - max_cnt = 0 - for (c, r) in log: - max_cnt = max(max_cnt, log[(c, r)]) - - # Create the heatmap - for (c, r) in log: - coords = coord(c, r) - b, n = coords - cap = max_cnt - v = float(log[(c, r)]) / cap - print >> sys.stderr, "%s => %d/%d => %f = %s" % (l_flat(layout[b][n+1]), log[(c,r)], cap, v, heatmap_color(v)) - set_bg (layout, coord(c, r), heatmap_color (v)) - set_tap_info (layout, coord (c, r), log[(c, r)], total) - - print json.dumps(layout) -if __name__ == "__main__": - if len(sys.argv) < 3: - print """Log to Heatmap -- creates a heatmap out of keyboard logs + heatmaps[l].update_log ((c, r)) + + if opts.dump_interval != -1 and cnt >= opts.dump_interval: + cnt = 0 + dump_all(out_dir, heatmaps) -Usage: log-to-heatmap.py base-layout.json logfile [row] >layout.json""" - sys.exit (1) - main(*sys.argv[1:]) + dump_all (out_dir, heatmaps) + +if __name__ == "__main__": + parser = argparse.ArgumentParser (description = "keylog to heatmap processor") + parser.add_argument ('outdir', action = 'store', + help = 'Output directory') + parser.add_argument ('--row', dest = 'restrict_row', action = 'store', type = int, + default = -1, help = 'Restrict processing to this row only') + parser.add_argument ('--dump-interval', dest = 'dump_interval', action = 'store', type = int, + default = 100, help = 'Dump stats and heatmap at every Nth event, -1 for dumping at EOF only') + parser.add_argument ('--ignore-column', dest = 'ignore_columns', action = 'append', type = int, + default = [], help = 'Ignore the specified columns') + args = parser.parse_args() + main(args) -- cgit v1.2.3 From e9ce4960c15066c14c775b1d769f1f89ec450787 Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Mon, 5 Sep 2016 17:40:03 -0400 Subject: Add new ErgoDox EZ keymap, YORUIAN --- .../keymaps/yoruian/90-ergodox-yoruian.conf | 6 ++ keyboards/ergodox/keymaps/yoruian/Makefile | 13 +++ keyboards/ergodox/keymaps/yoruian/README | 102 +++++++++++++++++++++ keyboards/ergodox/keymaps/yoruian/ergodox_yoruian | 34 +++++++ keyboards/ergodox/keymaps/yoruian/keymap.c | 61 ++++++++++++ keyboards/ergodox/keymaps/yoruian/yoruian.h | 61 ++++++++++++ 6 files changed, 277 insertions(+) create mode 100644 keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf create mode 100644 keyboards/ergodox/keymaps/yoruian/Makefile create mode 100644 keyboards/ergodox/keymaps/yoruian/README create mode 100644 keyboards/ergodox/keymaps/yoruian/ergodox_yoruian create mode 100644 keyboards/ergodox/keymaps/yoruian/keymap.c create mode 100644 keyboards/ergodox/keymaps/yoruian/yoruian.h (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf new file mode 100644 index 000000000..c8a92c5c5 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf @@ -0,0 +1,6 @@ +Section "InputClass" + Identifier "ErgoDox EZ" + MatchIsKeyboard "on" + MatchProduct "ErgoDox EZ ErgoDox EZ" + Option "XkbLayout" "ergodox_ez_yoruian" +EndSection diff --git a/keyboards/ergodox/keymaps/yoruian/Makefile b/keyboards/ergodox/keymaps/yoruian/Makefile new file mode 100644 index 000000000..b43a24c61 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/Makefile @@ -0,0 +1,13 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +install-xorg-configuration: + install -m 0664 90-$(KEYBOARD)-$(KEYMAP).conf \ + /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf + install -m 0644 $(KEYBOARD)_$(KEYMAP) \ + /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP) + +uninstall-xorg-configuration: + -rm -f /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf + -rm -f /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP) diff --git a/keyboards/ergodox/keymaps/yoruian/README b/keyboards/ergodox/keymaps/yoruian/README new file mode 100644 index 000000000..99b41434e --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/README @@ -0,0 +1,102 @@ + Snarfangel's YORUIAN for the ErgoDox EZ + ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ +DEFAULT +┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ ┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ +┃ ` │ ; │ : │ - │ / │ ( │ < ┃ ┃ > │ ) │ ^ │ * │ ~ │ Γ │ σ ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ ⎋ │ . │ y │ o │ r │ ? │ ✦ ┃ ┃ ✦ │ j │ v │ d │ f │ w │ q ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ ⎈ │ u │ i │ a │ n │ ! ├───┨ ┠───┤ m │ h │ t │ s │ c │ ⎈ ┃ +┠───┼───┼───┼───┼───┼───┤ ❖ ┃ ┃ ❖ ├───┼───┼───┼───┼───┼───┨ +┃ λ │ ' │ " │ , │ _ │ = │ ┃ ┃ │ k │ l │ p │ g │ b │ x ┃ +┠───┼───┼───┼───┼───╆━━━┷━━━┛ ┗━━━┷━━━╅───┼───┼───┼───┼───┨ +┃ ⎀ │ E │ │ │ ◆ ┃ ┃ ◆ │ │ │ z │ ⎙ ┃ +┗━━━┷━━━┷━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┷━━━┷━━━┛ + ┏━━━┯━━━┓ ┏━━━┯━━━┓ + ┃ ⌫ │ ⌥ ┃ ┃ ⎄ │ ↹ ┃ + ┏━━━╃───┼───┨ ┠───┼───╄━━━┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ e │ ⇧ ├───┨ ┠───┤ ⏎ │ ␣ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + ┗━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┛ +SHIFTED +┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ ┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ +┃ 9 │ 7 │ 5 │ 3 │ 1 │ [ │ { ┃ ┃ } │ ] │ 0 │ 2 │ 4 │ 6 │ 8 ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ │ * │ Y │ O │ R │ \ │ ┃ ┃ │ J │ V │ D │ F │ W │ Q ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ U │ I │ A │ N │ | ├───┨ ┠───┤ M │ H │ T │ S │ C │ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ # │ $ │ @ │ & │ + │ ┃ ┃ │ K │ L │ P │ G │ B │ X ┃ +┠───┼───┼───┼───┼───╆━━━┷━━━┛ ┗━━━┷━━━╅───┼───┼───┼───┼───┨ +┃ │ │ │ │ ┃ ┃ │ │ │ Z │ ┃ +┗━━━┷━━━┷━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┷━━━┷━━━┛ + ┏━━━┯━━━┓ ┏━━━┯━━━┓ + ┃ │ ┃ ┃ │ ┃ + ┏━━━╃───┼───┨ ┠───┼───╄━━━┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ │ ├───┨ ┠───┤ │ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + ┗━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┛ +λ LAYER +┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ ┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ +┃ │ │ │ │ │ │ ┃ ┃ │ │ ⑤ │ ⑥ │ ⑦ │ ⑧ │ ⑨ ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ │ │ │ │ │ │ ┃ ┃ │ │ ① │ ② │ ③ │ ④ │ ⑩ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ │ │ │ │ ├───┨ ┠───┤ ⎉ │ ← │ ↓ │ ↑ │ → │ ⑪ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ λ │ │ │ │ │ │ ┃ ┃ │ │ ⇱ │ ⎘ │ ⎗ │ ⇲ │ ⑫ ┃ +┠───┼───┼───┼───┼───╆━━━┷━━━┛ ┗━━━┷━━━╅───┼───┼───┼───┼───┨ +┃ │ │ │ │ ┃ ┃ │ │ │ │ ┃ +┗━━━┷━━━┷━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┷━━━┷━━━┛ + ┏━━━┯━━━┓ ┏━━━┯━━━┓ + ┃ │ ┃ ┃ │ ┃ + ┏━━━╃───┼───┨ ┠───┼───╄━━━┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ │ ├───┨ ┠───┤ │ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + ┗━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┛ + +Installation (X only) +‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ + 1. Build and flash firmware as usual + + 2. sudo make install-xorg-configuration + + 3. Restart X + +Features +‾‾‾‾‾‾‾‾ + • E on the thumb + + • Emacs-friendly + + • Symmetric control keys for finger wear levelling + + • Greek and subscript dead keys + + • Compose key for arbitrary Unicode input via ~/.XCompose + +Don't Cares +‾‾‾‾‾‾‾‾‾‾‾ + • Easy migration from QWERTY + + • Compatbility with non-XKB systems + + • Mouse emulation + + • Media keys + +Acknowledgements +‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ +Snarfangel, for designing the layout. + +The GNU FreeFont project and Steve White, for adding new keyboard +symbols. + +Xah Lee, for http://xahlee.info/comp/unicode_computing_symbols.html + +Colophon +‾‾‾‾‾‾‾‾ +This file is best-viewed with an SVN version of GNU FreeFont Mono. diff --git a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian new file mode 100644 index 000000000..734314394 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian @@ -0,0 +1,34 @@ +partial alphanumeric_keys modifier_keys +xkb_symbols "ergodox_ez_yoruian" { + include "us" + name[Group1]= "English (yoruian-1.0.0)"; + + replace key { [ Multi_key, Multi_key ] }; + replace key { [ Hyper_L, Hyper_L ] }; + replace key { [ grave, 9 ] }; + replace key { [ semicolon, 7 ] }; + replace key { [ colon, 5 ] }; + replace key { [ minus, 3 ] }; + replace key { [ slash, 1 ] }; + replace key { [ asciicircum, 0 ] }; + replace key { [ percent, 2 ] }; + replace key { [ asciitilde, 4 ] }; + replace key { [ dead_greek, 6 ] }; + replace key { [ dead_caron, 8 ] }; + replace key { [ E, E ] }; + replace key { [ period, asterisk ] }; + replace key { [ question, backslash ] }; + replace key { [ exclam, bar ] }; + replace key { [ apostrophe, numbersign ] }; + replace key { [ quotedbl, dollar ] }; + replace key { [ comma, at ] }; + replace key { [ underscore, ampersand ] }; + replace key { [ equal, plus ] }; + replace key { [ parenleft, bracketleft ] }; + replace key { [ less, braceleft ] }; + replace key { [ greater, braceright ] }; + replace key { [ parenright, bracketright ] }; + + modifier_map none { }; + modifier_map Mod3 { }; +}; diff --git a/keyboards/ergodox/keymaps/yoruian/keymap.c b/keyboards/ergodox/keymaps/yoruian/keymap.c new file mode 100644 index 000000000..d3635ddf3 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/keymap.c @@ -0,0 +1,61 @@ +/* + * Copyright 2016 Thomas Fitzsimmons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "yoruian.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP\ +(9, 7, 5, 3, 1, GRV, MINS, EQL, LBRC, 0, 2, 4, 6, 8, + ES, RBRC, Y, O, R, BSLS, P3, P3, J, V, D, F, W, Q, + LC, U, I, A, N, SCLN, M, H, T, S, C, RC, + FF, QUOT, COMM, DOT, SLSH, P0, LGUI, LGUI, K, L, P, G, B, X, + IN, P1, NO, NO, LALT, LALT, NO, NO, Z, PS, + BSPC, RALT, P2, TAB, + NO, NO, + E, LSFT, NO, NO, ENT, SPC), +[1] = KEYMAP\ +(TR, TR, TR, TR, TR, TR, TR, TR, TR, F5, F6, F7, F8, F9, + TR, TR, TR, TR, TR, TR, TR, TR, TR, F1, F2, F3, F4, FT, + TR, TR, TR, TR, TR, TR, PAUS, LEFT, DOWN, UP, RGHT, FE, + TR, TR, TR, TR, TR, TR, TR, TR, TR, HOME, PGDN, PGUP, END, FW, + TR, TR, TR, TR, TR, TR, TR, TR, TR, TR, + TR, TR, TR, TR, + TR, TR, + TR, TR, TR, TR, TR, TR), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; + +void matrix_init_user(void) { +}; + +void matrix_scan_user(void) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); +}; + +/* + * Local Variables: + * electric-indent-mode: nil + * End: + */ diff --git a/keyboards/ergodox/keymaps/yoruian/yoruian.h b/keyboards/ergodox/keymaps/yoruian/yoruian.h new file mode 100644 index 000000000..1adcb7fd3 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/yoruian.h @@ -0,0 +1,61 @@ +/* + * Copyright 2016 Thomas Fitzsimmons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#undef KEYMAP +#define KEYMAP\ +( \ + /* Spacial positions. */ \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k28, k29, k2A, k2B, k2C, k2D, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k43, k44, k49, k4A, k4B, k4C, k4D, \ + k55, k56, k57, k58, \ + k54, k59, \ + k53, k52, k51, k5C, k5B, k5A) \ + \ + /* Matrix positions. */ \ + { \ + { KC_##k00, KC_##k10, KC_##k20, KC_##k30, KC_##k40, KC_NO }, \ + { KC_##k01, KC_##k11, KC_##k21, KC_##k31, KC_##k41, KC_##k51 }, \ + { KC_##k02, KC_##k12, KC_##k22, KC_##k32, KC_##k42, KC_##k52 }, \ + { KC_##k03, KC_##k13, KC_##k23, KC_##k33, KC_##k43, KC_##k53 }, \ + { KC_##k04, KC_##k14, KC_##k24, KC_##k34, KC_##k44, KC_##k54 }, \ + { KC_##k05, KC_##k15, KC_##k25, KC_##k35, KC_NO, KC_##k55 }, \ + { KC_##k06, KC_##k16, KC_NO, KC_##k36, KC_NO, KC_##k56 }, \ + { KC_##k07, KC_##k17, KC_NO, KC_##k37, KC_NO, KC_##k57 }, \ + { KC_##k08, KC_##k18, KC_##k28, KC_##k38, KC_NO, KC_##k58 }, \ + { KC_##k09, KC_##k19, KC_##k29, KC_##k39, KC_##k49, KC_##k59 }, \ + { KC_##k0A, KC_##k1A, KC_##k2A, KC_##k3A, KC_##k4A, KC_##k5A }, \ + { KC_##k0B, KC_##k1B, KC_##k2B, KC_##k3B, KC_##k4B, KC_##k5B }, \ + { KC_##k0C, KC_##k1C, KC_##k2C, KC_##k3C, KC_##k4C, KC_##k5C }, \ + { KC_##k0D, KC_##k1D, KC_##k2D, KC_##k3D, KC_##k4D, KC_NO } \ + } + +#define KC_ES KC_ESC +#define KC_LC KC_LCTL +#define KC_RC KC_RCTL +#define KC_FF MO(1) +#define KC_IN KC_INS +#define KC_PS KC_PSCR +#define KC_TR KC_TRNS +#define KC_FT KC_F10 +#define KC_FE KC_F11 +#define KC_FW KC_F12 -- cgit v1.2.3 From ce53c0643d4eaf8f13ac1140d3bd91dfa5f90e22 Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Tue, 6 Sep 2016 00:09:14 -0400 Subject: Fix ergodox_yoruian XKB naming --- keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf | 2 +- keyboards/ergodox/keymaps/yoruian/ergodox_yoruian | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf index c8a92c5c5..ce4fce3b1 100644 --- a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf +++ b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf @@ -2,5 +2,5 @@ Section "InputClass" Identifier "ErgoDox EZ" MatchIsKeyboard "on" MatchProduct "ErgoDox EZ ErgoDox EZ" - Option "XkbLayout" "ergodox_ez_yoruian" + Option "XkbLayout" "ergodox_yoruian" EndSection diff --git a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian index 734314394..0d13fbfd4 100644 --- a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian +++ b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian @@ -1,5 +1,5 @@ partial alphanumeric_keys modifier_keys -xkb_symbols "ergodox_ez_yoruian" { +xkb_symbols "ergodox_yoruian" { include "us" name[Group1]= "English (yoruian-1.0.0)"; -- cgit v1.2.3 From a3e7042084ac2a117cea129e4dd4995904f247e8 Mon Sep 17 00:00:00 2001 From: joar Date: Tue, 6 Sep 2016 16:00:08 +0200 Subject: norwegian programmer-friendly layout --- .../keyboard-layout.png | Bin 0 -> 140077 bytes .../keymaps/norwegian_programmer_osx_pc/keymap.c | 180 +++++++++++++++++++++ .../keymaps/norwegian_programmer_osx_pc/readme.md | 30 ++++ .../keyboard-layout.png | Bin 0 -> 97519 bytes .../norwegian_programmer_osx_pc_colemak/keymap.c | 180 +++++++++++++++++++++ .../norwegian_programmer_osx_pc_colemak/readme.md | 30 ++++ 6 files changed, 420 insertions(+) create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png new file mode 100644 index 000000000..544b5658e Binary files /dev/null and b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png differ diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c new file mode 100644 index 000000000..1d505f8e3 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c @@ -0,0 +1,180 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_FUNC 2 // numbers and function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | * | [ | ] | { | } | ~ |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | + | Q | W | E | R | T | " | | ' | Y | U | I | O | P | Å | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | / | A | S | D | F | G |------| |------| H | J | K | L | Ø | Æ | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | - | Z | X | C | V | B | | | | N | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Alt/esc| ! | ? | : | TAB | | LEFT | _ | & | | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | # | ` | |Insert| % | + * ,------|------|------| |------+-------+------. + * | | | ´ | | Del | | | + * | Shift|Ctrl/.|------| |------| Enter |Space | + * | | |GUI/, | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_PAST, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, KC_FN2, TG(1), + KC_PPLS, KC_Q, KC_W, KC_E, KC_R, KC_T, NO_QUO2, + KC_PSLS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_PMNS, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + ALT_T(KC_ESC), KC_EXLM , NO_QUES, NO_COLN, KC_TAB, + KC_HASH, KC_FN7, + KC_FN6, + KC_FN1,CTL_T(KC_DOT),GUI_T(KC_COMMA), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AA , + KC_H, KC_J, KC_K, KC_L, NO_OSLH, NO_AE, + NO_EQL, KC_N, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, + KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), + KC_INSERT, KC_PERC, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MACS (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | |,/Ctrl| | | | ` | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | ` | | | | + * ,------|------|------| |------+------+------. + * | | | ´ | | | | | + * | |GUI/. |------| |------| | | + * | | |crtl/,| | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, NO_GRV_MAC, + KC_FN10, + KC_TRNS,GUI_T(KC_DOT) , CTL_T(KC_COMMA), + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NO_BSLS_MAC, + KC_TRNS, KC_TRNS, KC_TRNS, NO_PIPE_MAC, OSL(2), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++´ánd Fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 8 | 7 | 6 | 5 | 9 | | | | | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 4 | 3 | 2 | 1 | 0 |------| |------| | F1 | F2 | F3 | F4 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_FUNC] = KEYMAP( + NO_ASTR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + NO_PLUS, KC_8, KC_7,KC_6,KC_5, KC_9 , KC_TRNS, + NO_SLSH , KC_4 , KC_3 , KC_2 , KC_1 , KC_0, + NO_MINS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_F5, KC_F6 , KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS, KC_HOME, KC_TRNS, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md new file mode 100644 index 000000000..f7e8baf56 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md @@ -0,0 +1,30 @@ +# Norwegian setup with osx/pc toggle + +## Motivation +I wanted a Norwegian setup that worked in a similar way on both my Mac and PC. I also wanted the keyboard to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb or the wrist. +- Navigation is prioritized, arrows below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(on a PC(Windows or Linux) or Mac. Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Since symbols are prioritized in this setup, numbers and function keys are on a new layer. The easiest way to use the layer switch(and also the alt key), is to push your hand right below the little finger, on the key. You will then have all your fingers free to type numbers or press function keys. + +## Tap-shift +Tap for the next character to be shifted, hold down for regular shift. + +## Comma dot and escape +Comma, dot and escape share buttons with modifier keys. Tap to access these keys, hold down to use the keys as modifier keys. + +## Numpad symbols ++-/* are implemented with the numpad keycodes. The benefit is that they will work better with shortcuts in certain programs. For some reason, the default setting in the osx terminal is to not accept numpad characters for '/' and '-'. For a solution, see https://discussions.apple.com/thread/6613968?start=0&tstart=0. +If you really need the norwegian symbols in a program, you can access them using the number toggle button. + +## Layout + +![keyboard-layout](keyboard-layout.png) diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png new file mode 100644 index 000000000..462de5c56 Binary files /dev/null and b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png differ diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c new file mode 100644 index 000000000..acf74a47d --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c @@ -0,0 +1,180 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_FUNC 2 // numbers and function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | * | [ | ] | { | } | ~ |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | + | Q | W | F | P | G | " | | ' | J | L | U | Y | Å | Æ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | / | A | R | S | T | D |------| |------| H | N | E | I | O | Ø | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | - | Z | X | C | V | B | | | | K | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Alt/esc| ! | ? | : | TAB | | LEFT | _ | & | | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | # | ` | |Insert| % | + * ,------|------|------| |------+-------+------. + * | | | ´ | | Del | | | + * | Shift|Ctrl/.|------| |------| Enter |Space | + * | | |GUI/, | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_PAST, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, KC_FN2, TG(1), + KC_PPLS, KC_Q, KC_W, KC_F, KC_P, KC_G, NO_QUO2, + KC_PSLS, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_PMNS, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + ALT_T(KC_ESC), KC_EXLM , NO_QUES, NO_COLN, KC_TAB, + KC_HASH, KC_FN7, + KC_FN6, + KC_FN1,CTL_T(KC_DOT),GUI_T(KC_COMMA), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_J, KC_L, KC_U, KC_Y, NO_AA, NO_AE , + KC_H, KC_N, KC_E, KC_I, KC_O, NO_OSLH, + NO_EQL, KC_K, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, + KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), + KC_INSERT, KC_PERC, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MAC (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | |,/Ctrl| | | | ` | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | ` | | | | + * ,------|------|------| |------+------+------. + * | | | ´ | | | | | + * | |GUI/. |------| |------| | | + * | | |crtl/,| | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, NO_GRV_MAC, + KC_FN10, + KC_TRNS,GUI_T(KC_DOT) , CTL_T(KC_COMMA), + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NO_BSLS_MAC, + KC_TRNS, KC_TRNS, KC_TRNS, NO_PIPE_MAC, OSL(2), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++´ánd Fn layer pc + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 8 | 7 | 6 | 5 | 9 | | | | | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 4 | 3 | 2 | 1 | 0 |------| |------| | F1 | F2 | F3 | F4 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_FUNC] = KEYMAP( + NO_ASTR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + NO_PLUS, KC_8, KC_7,KC_6,KC_5, KC_9 , KC_TRNS, + NO_SLSH , KC_4 , KC_3 , KC_2 , KC_1 , KC_0, + NO_MINS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_F5, KC_F6 , KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS, KC_HOME, KC_TRNS, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md new file mode 100644 index 000000000..aaaec3e53 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md @@ -0,0 +1,30 @@ +# Norwegian Colemak setup with osx/pc toggle + +## Motivation +I wanted a Norwegian Colemak setup that worked in a similar way on both my Mac and PC. I also wanted the keyboard to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb or the wrist. +- Navigation is prioritized, arrows below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(not colemak software variants) on a PC(Windows or Linux) or Mac. Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Since symbols are prioritized in this setup, numbers and function keys are on a new layer. The easiest way to use the layer switch(and also the alt key), is to push your hand right below the little finger, on the key. You will then have all your fingers free to type numbers or press function keys. + +## Tap-shift +Tap for the next character to be shifted, hold down for regular shift. + +## Comma dot and escape +Comma, dot and escape share buttons with modifier keys. Tap to access these keys, hold down to use the keys as modifier keys. + +## Numpad symbols ++-/* are implemented with the numpad keycodes. The benefit is that they will work better with shortcuts in certain programs. For some reason, the default setting in the osx terminal is to not accept numpad characters for '/' and '-'. For a solution, see https://discussions.apple.com/thread/6613968?start=0&tstart=0. +If you really need the norwegian symbols in a program, you can access them using the number toggle button. + +## Layout + +![keyboard-layout](keyboard-layout.png) -- cgit v1.2.3 From da16733e7ab66ebd27fde21312990f5733966a52 Mon Sep 17 00:00:00 2001 From: Roman Zolotarev Date: Wed, 7 Sep 2016 07:55:22 +0800 Subject: Change CTL_T(KC_ESC) to KC_LCTRL and update readme --- .../keymaps/romanzolotarev-norman-osx/keymap.c | 30 +++++++++--------- .../keymaps/romanzolotarev-norman-osx/readme.md | 37 +++++++++++++++------- 2 files changed, 40 insertions(+), 27 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c index 24d0c4ecb..2c6430440 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c @@ -6,23 +6,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = KEYMAP( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, - KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, - CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, - KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, + KC_LCTRL, KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, // - /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, - /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, - /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, - /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, - KC_MPLY, KC_MNXT, + /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_MPLY, KC_MNXT, KC_MPRV, - KC_RALT, KC_QUOT, KC_SPC + KC_RALT, KC_QUOT, KC_SPC ) }; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md index 80475ab21..a86061285 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -1,28 +1,41 @@ # Roman's Layout -There is only one layer based on [Norman layout](https://normanlayout.info/). +There is only one layer, and it is based on [Norman +layout](https://normanlayout.info/). Looking for multiple-layer layouts? -- [Symbols, arrows, plover, HJKL arrows](../romanzolotarev-norman-plover-osx-hjkl/) +- [Symbols, arrows, plover, HJKL + arrows](../romanzolotarev-norman-plover-osx-hjkl/) - [Same with IJKL arrows](../romanzolotarev-norman-plover-osx/) [![keyboard-layout](romanzolotarev-norman-osx.png)](http://www.keyboard-layout-editor.com/#/gists/9e89d54f1ea6eeeb7dab1b2d19d28195) -## Functional Keys +## How to use Vim key -- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). -- Tap `F2` to copy screenshot to the clipboard. -- Hold `SHIFT` and tap `F2` to save screenshot as a file. -- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). - -## CTRL/ESC - -CTRL and ESC are frequently used in Vim. +It is `CTL_T(KC_ESC)` and it works this way: - Tap `CTRL/ESC` to send `ESC`. - Hold `CTRL/ESC` to use as `CTRL`. -## Activate N-rollover +## How to activate N-rollover - Hold left `SHIFT` and right `SHIRT` and then tap `N`. + +## How to make and flash on OS X + +First you need to install few brew packages. + +```bash +brew tap osx-cross/avr +brew install dfu-programmer avr-libc teensy_loader_cli +``` + +Then you can clone this repository, make and flash your ErgoDox. + +```bash +git clone https://github.com/romanzolotarev/qmk_firmware +cd qmk_firmware/keyboards/ergodox +# Optionally tweak ./keymaps/romanzolotarev-norman-osx/keymap.c +SLEEP_LED_ENABLED=no KEYMAP=romanzolotarev-norman-osx make teensy +``` -- cgit v1.2.3 From 1406118c7123359cd66d589d22d6ecfa268e3a24 Mon Sep 17 00:00:00 2001 From: profet23 Date: Tue, 6 Sep 2016 21:59:23 -0400 Subject: Removing separate ergodox80 project. Created KEYMAP_80 in ez.h to support 80 key ergodoxes. Creating default_80 keymap as ez keymap. --- keyboards/ergodox/ez/ez.h | 41 ++ .../ergodox/ez/keymaps/default_80/ergodox80.png | Bin 0 -> 20663 bytes keyboards/ergodox/ez/keymaps/default_80/keymap.c | 183 ++++++ keyboards/ergodox/ez/keymaps/default_80/readme.md | 10 + keyboards/ergodox80/Makefile | 5 - keyboards/ergodox80/config.h | 31 - keyboards/ergodox80/ergodox80.c | 0 keyboards/ergodox80/ergodox80.h | 5 - keyboards/ergodox80/ergodox80/190hotfix.sh | 19 - keyboards/ergodox80/ergodox80/Makefile | 3 - keyboards/ergodox80/ergodox80/config.h | 65 -- keyboards/ergodox80/ergodox80/ergodox80.c | 85 --- keyboards/ergodox80/ergodox80/ergodox80.h | 122 ---- keyboards/ergodox80/ergodox80/i2cmaster.h | 178 ------ keyboards/ergodox80/ergodox80/matrix.c | 382 ----------- keyboards/ergodox80/ergodox80/rules.mk | 76 --- keyboards/ergodox80/ergodox80/twimaster.c | 208 ------ .../ergodox80/ergodox80/util/compile_keymap.py | 710 --------------------- keyboards/ergodox80/ergodox80/util/readme.md | 3 - keyboards/ergodox80/keymaps/default/keymap.c | 183 ------ keyboards/ergodox80/readme.md | 6 - keyboards/ergodox80/rules.mk | 28 - 22 files changed, 234 insertions(+), 2109 deletions(-) create mode 100644 keyboards/ergodox/ez/keymaps/default_80/ergodox80.png create mode 100644 keyboards/ergodox/ez/keymaps/default_80/keymap.c create mode 100644 keyboards/ergodox/ez/keymaps/default_80/readme.md delete mode 100644 keyboards/ergodox80/Makefile delete mode 100644 keyboards/ergodox80/config.h delete mode 100644 keyboards/ergodox80/ergodox80.c delete mode 100644 keyboards/ergodox80/ergodox80.h delete mode 100755 keyboards/ergodox80/ergodox80/190hotfix.sh delete mode 100644 keyboards/ergodox80/ergodox80/Makefile delete mode 100644 keyboards/ergodox80/ergodox80/config.h delete mode 100644 keyboards/ergodox80/ergodox80/ergodox80.c delete mode 100644 keyboards/ergodox80/ergodox80/ergodox80.h delete mode 100644 keyboards/ergodox80/ergodox80/i2cmaster.h delete mode 100644 keyboards/ergodox80/ergodox80/matrix.c delete mode 100644 keyboards/ergodox80/ergodox80/rules.mk delete mode 100644 keyboards/ergodox80/ergodox80/twimaster.c delete mode 100644 keyboards/ergodox80/ergodox80/util/compile_keymap.py delete mode 100644 keyboards/ergodox80/ergodox80/util/readme.md delete mode 100644 keyboards/ergodox80/keymaps/default/keymap.c delete mode 100644 keyboards/ergodox80/readme.md delete mode 100644 keyboards/ergodox80/rules.mk (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ez/ez.h b/keyboards/ergodox/ez/ez.h index db4ec867b..124bf850e 100644 --- a/keyboards/ergodox/ez/ez.h +++ b/keyboards/ergodox/ez/ez.h @@ -119,4 +119,45 @@ inline void ergodox_led_all_set(uint8_t n) { k0D, k1D, k2D, k3D, k4D, KC_NO } \ } +#define KEYMAP_80( \ + \ + /* left hand, spatial positions */ \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k45,k46,k54, \ + k53,k52,k51, \ + \ + /* right hand, spatial positions */ \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59,k47,k48, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k10, k20, k30, k40, KC_NO }, \ + { k01, k11, k21, k31, k41, k51 }, \ + { k02, k12, k22, k32, k42, k52 }, \ + { k03, k13, k23, k33, k43, k53 }, \ + { k04, k14, k24, k34, k44, k54 }, \ + { k05, k15, k25, k35, k45, k55 }, \ + { k06, k16, KC_NO, k36, k46, k56 }, \ + \ + { k07, k17, KC_NO, k37, k47, k57 }, \ + { k08, k18, k28, k38, k48, k58 }, \ + { k09, k19, k29, k39, k49, k59 }, \ + { k0A, k1A, k2A, k3A, k4A, k5A }, \ + { k0B, k1B, k2B, k3B, k4B, k5B }, \ + { k0C, k1C, k2C, k3C, k4C, k5C }, \ + { k0D, k1D, k2D, k3D, k4D, KC_NO } \ + } + #endif diff --git a/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png new file mode 100644 index 000000000..66b9752eb Binary files /dev/null and b/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png differ diff --git a/keyboards/ergodox/ez/keymaps/default_80/keymap.c b/keyboards/ergodox/ez/keymaps/default_80/keymap.c new file mode 100644 index 000000000..505ff2972 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/default_80/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | 1 | 2 | Home | | PgUp | 3 | 4 | + * |------|------|------| |------|--------|------| + * | Space| BkSp | End | | PgDn | Tab |Enter | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP_80( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_1, KC_2, KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP,KC_3, KC_4, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * |------|------|------| |------|------|------| + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP_80( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+----------. + * | | | | | | | | + * |------|------|------| |------|------|----------| + * | | | | | | |BrwserBack| + * `--------------------' `------------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP_80( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/default_80/readme.md b/keyboards/ergodox/ez/keymaps/default_80/readme.md new file mode 100644 index 000000000..b6bbb86d2 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/default_80/readme.md @@ -0,0 +1,10 @@ +# ErgoDox 80 Default Configuration + +This is based on the default Ergodox EZ keymap. +The difference is that this keymap supports 80 key layouts. +If you own an 80 key Ergodox, use this as an example to get your desired keymap. + +**NOTE:** This layout is not physically supported by the Ergodox EZ. + + +![Default80](ergodox80.png) diff --git a/keyboards/ergodox80/Makefile b/keyboards/ergodox80/Makefile deleted file mode 100644 index 94fa847ff..000000000 --- a/keyboards/ergodox80/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -SUBPROJECT_DEFAULT = ergodox80 - -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif diff --git a/keyboards/ergodox80/config.h b/keyboards/ergodox80/config.h deleted file mode 100644 index 5dd6daa15..000000000 --- a/keyboards/ergodox80/config.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef KEYBOARDS_ERGODOX_CONFIG_H_ -#define KEYBOARDS_ERGODOX_CONFIG_H_ - -#define MOUSEKEY_DELAY 100 -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 3 -#define MOUSEKEY_TIME_TO_MAX 10 - -#define TAPPING_TOGGLE 1 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -#define TAPPING_TERM 200 -#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ - keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ -) - -#include "ergodox80/config.h" - - -#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox80/ergodox80.c b/keyboards/ergodox80/ergodox80.c deleted file mode 100644 index e69de29bb..000000000 diff --git a/keyboards/ergodox80/ergodox80.h b/keyboards/ergodox80/ergodox80.h deleted file mode 100644 index ea40f4d45..000000000 --- a/keyboards/ergodox80/ergodox80.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_ -#define KEYBOARDS_ERGODOX_ERGODOX_H_ -#include "ergodox80.h" - -#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */ diff --git a/keyboards/ergodox80/ergodox80/190hotfix.sh b/keyboards/ergodox80/ergodox80/190hotfix.sh deleted file mode 100755 index bdc3adce2..000000000 --- a/keyboards/ergodox80/ergodox80/190hotfix.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/bash -#a tool to fix broken keymaps as a result of pull request #190 -#changing the declaration of matrix_scan_user() and matrix_init_user() -# -#This script will save a copy of the specified keymap as keymap.c.bak -#and then create a new keymap.c with the definion corrected. -#this script must be run from the ergodox_ez directory -if [ $# -ne 1 ]; then - echo $0: usage: ./190hotfix keymap_name - exit 1 -fi - -echo Saving backup as ./keymaps/$1/keymap.c.bak ... -mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak - -echo Modifying ./keymaps/$1/keymap.c ... -cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c - -echo Complete! diff --git a/keyboards/ergodox80/ergodox80/Makefile b/keyboards/ergodox80/ergodox80/Makefile deleted file mode 100644 index 191c6bb66..000000000 --- a/keyboards/ergodox80/ergodox80/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/ergodox80/ergodox80/config.h b/keyboards/ergodox80/ergodox80/config.h deleted file mode 100644 index 084a044ee..000000000 --- a/keyboards/ergodox80/ergodox80/config.h +++ /dev/null @@ -1,65 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2013 Oleg Kostyuk - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef ERGODOX_EZ_CONFIG_H -#define ERGODOX_EZ_CONFIG_H - -#include "../config.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1307 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ErgoDox EZ -#define PRODUCT ErgoDox EZ -#define DESCRIPTION QMK keyboard firmware for Ergodox EZ - -/* key matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -#define LED_BRIGHTNESS_LO 15 -#define LED_BRIGHTNESS_HI 255 - - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -//#define DEBUG_MATRIX_SCAN_RATE - -#endif diff --git a/keyboards/ergodox80/ergodox80/ergodox80.c b/keyboards/ergodox80/ergodox80/ergodox80.c deleted file mode 100644 index b21b1073b..000000000 --- a/keyboards/ergodox80/ergodox80/ergodox80.c +++ /dev/null @@ -1,85 +0,0 @@ -#include "ergodox80.h" -#include "i2cmaster.h" - -bool i2c_initialized = 0; -uint8_t mcp23018_status = 0x20; - -void matrix_init_kb(void) { - // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md") - TCCR1A = 0b10101001; // set and configure fast PWM - TCCR1B = 0b00001001; // set and configure fast PWM - - // (tied to Vcc for hardware convenience) - DDRB &= ~(1<<4); // set B(4) as input - PORTB &= ~(1<<4); // set B(4) internal pull-up disabled - - // unused pins - C7, D4, D5, D7, E6 - // set as input with internal pull-ip enabled - DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); - DDRE &= ~(1<<6); - PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); - PORTE |= (1<<6); - - ergodox_blink_all_leds(); - - matrix_init_user(); -} - -void ergodox_blink_all_leds(void) -{ - ergodox_led_all_off(); - ergodox_led_all_set(LED_BRIGHTNESS_HI); - ergodox_right_led_1_on(); - _delay_ms(50); - ergodox_right_led_2_on(); - _delay_ms(50); - ergodox_right_led_3_on(); - _delay_ms(50); - ergodox_right_led_1_off(); - _delay_ms(50); - ergodox_right_led_2_off(); - _delay_ms(50); - ergodox_right_led_3_off(); - //ergodox_led_all_on(); - //_delay_ms(333); - ergodox_led_all_off(); -} - -uint8_t init_mcp23018(void) { - mcp23018_status = 0x20; - - // I2C subsystem - if (i2c_initialized == 0) { - i2c_init(); // on pins D(1,0) - i2c_initialized++; - _delay_ms(1000); - } - - // set pin direction - // - unused : input : 1 - // - input : input : 1 - // - driving : output : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; - i2c_stop(); - - // set pull-up - // - unused : on : 1 - // - input : on : 1 - // - driving : off : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; - -out: - i2c_stop(); - - return mcp23018_status; -} - - diff --git a/keyboards/ergodox80/ergodox80/ergodox80.h b/keyboards/ergodox80/ergodox80/ergodox80.h deleted file mode 100644 index 8012b0a74..000000000 --- a/keyboards/ergodox80/ergodox80/ergodox80.h +++ /dev/null @@ -1,122 +0,0 @@ -#ifndef ERGODOX_EZ_H -#define ERGODOX_EZ_H - -#include "quantum.h" -#include -#include -#include "i2cmaster.h" -#include - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define CPU_16MHz 0x00 - -// I2C aliases and register addresses (see "mcp23018.md") -#define I2C_ADDR 0b0100000 -#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) -#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) -#define IODIRA 0x00 // i/o direction register -#define IODIRB 0x01 -#define GPPUA 0x0C // GPIO pull-up resistor register -#define GPPUB 0x0D -#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) -#define GPIOB 0x13 -#define OLATA 0x14 // output latch register -#define OLATB 0x15 - -extern uint8_t mcp23018_status; - -void init_ergodox(void); -void ergodox_blink_all_leds(void); -uint8_t init_mcp23018(void); -uint8_t ergodox_left_leds_update(void); - -#define LED_BRIGHTNESS_LO 15 -#define LED_BRIGHTNESS_HI 255 - - -inline void ergodox_board_led_on(void) { DDRD |= (1<<6); PORTD |= (1<<6); } -inline void ergodox_right_led_1_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); } -inline void ergodox_right_led_2_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); } -inline void ergodox_right_led_3_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); } -inline void ergodox_right_led_on(uint8_t led) { DDRB |= (1<<(led+4)); PORTB |= (1<<(led+4)); } - -inline void ergodox_board_led_off(void) { DDRD &= ~(1<<6); PORTD &= ~(1<<6); } -inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); } -inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); } -inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); } -inline void ergodox_right_led_off(uint8_t led) { DDRB &= ~(1<<(led+4)); PORTB &= ~(1<<(led+4)); } - -inline void ergodox_led_all_on(void) -{ - ergodox_board_led_on(); - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); -} - -inline void ergodox_led_all_off(void) -{ - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); -} - -inline void ergodox_right_led_1_set(uint8_t n) { OCR1A = n; } -inline void ergodox_right_led_2_set(uint8_t n) { OCR1B = n; } -inline void ergodox_right_led_3_set(uint8_t n) { OCR1C = n; } -inline void ergodox_right_led_set(uint8_t led, uint8_t n) { - (led == 1) ? (OCR1A = n) : - (led == 2) ? (OCR1B = n) : - (OCR1C = n); -} - -inline void ergodox_led_all_set(uint8_t n) -{ - ergodox_right_led_1_set(n); - ergodox_right_led_2_set(n); - ergodox_right_led_3_set(n); -} - -#define KEYMAP( \ - \ - /* left hand, spatial positions */ \ - k00,k01,k02,k03,k04,k05,k06, \ - k10,k11,k12,k13,k14,k15,k16, \ - k20,k21,k22,k23,k24,k25, \ - k30,k31,k32,k33,k34,k35,k36, \ - k40,k41,k42,k43,k44, \ - k55,k56, \ - k45,k46,k54, \ - k53,k52,k51, \ - \ - /* right hand, spatial positions */ \ - k07,k08,k09,k0A,k0B,k0C,k0D, \ - k17,k18,k19,k1A,k1B,k1C,k1D, \ - k28,k29,k2A,k2B,k2C,k2D, \ - k37,k38,k39,k3A,k3B,k3C,k3D, \ - k49,k4A,k4B,k4C,k4D, \ - k57,k58, \ - k59,k47,k48, \ - k5C,k5B,k5A ) \ - \ - /* matrix positions */ \ - { \ - { k00, k10, k20, k30, k40, KC_NO }, \ - { k01, k11, k21, k31, k41, k51 }, \ - { k02, k12, k22, k32, k42, k52 }, \ - { k03, k13, k23, k33, k43, k53 }, \ - { k04, k14, k24, k34, k44, k54 }, \ - { k05, k15, k25, k35, k45, k55 }, \ - { k06, k16, KC_NO, k36, k46, k56 }, \ - \ - { k07, k17, KC_NO, k37, k47, k57 }, \ - { k08, k18, k28, k38, k48, k58 }, \ - { k09, k19, k29, k39, k49, k59 }, \ - { k0A, k1A, k2A, k3A, k4A, k5A }, \ - { k0B, k1B, k2B, k3B, k4B, k5B }, \ - { k0C, k1C, k2C, k3C, k4C, k5C }, \ - { k0D, k1D, k2D, k3D, k4D, KC_NO } \ - } - -#endif diff --git a/keyboards/ergodox80/ergodox80/i2cmaster.h b/keyboards/ergodox80/ergodox80/i2cmaster.h deleted file mode 100644 index 3917b9e6c..000000000 --- a/keyboards/ergodox80/ergodox80/i2cmaster.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef _I2CMASTER_H -#define _I2CMASTER_H 1 -/************************************************************************* -* Title: C include file for the I2C master interface -* (i2cmaster.S or twimaster.c) -* Author: Peter Fleury http://jump.to/fleury -* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device -* Usage: see Doxygen manual -**************************************************************************/ - -#ifdef DOXYGEN -/** - @defgroup pfleury_ic2master I2C Master library - @code #include @endcode - - @brief I2C (TWI) Master Software Library - - Basic routines for communicating with I2C slave devices. This single master - implementation is limited to one bus master on the I2C bus. - - This I2c library is implemented as a compact assembler software implementation of the I2C protocol - which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). - Since the API for these two implementations is exactly the same, an application can be linked either against the - software I2C implementation or the hardware I2C implementation. - - Use 4.7k pull-up resistor on the SDA and SCL pin. - - Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module - i2cmaster.S to your target when using the software I2C implementation ! - - Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. - - @note - The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted - to GNU assembler and AVR-GCC C call interface. - Replaced the incorrect quarter period delays found in AVR300 with - half period delays. - - @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury - - @par API Usage Example - The following code shows typical usage of this library, see example test_i2cmaster.c - - @code - - #include - - - #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet - - int main(void) - { - unsigned char ret; - - i2c_init(); // initialize I2C library - - // write 0x75 to EEPROM address 5 (Byte Write) - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - i2c_write(0x05); // write address = 5 - i2c_write(0x75); // write value 0x75 to EEPROM - i2c_stop(); // set stop conditon = release bus - - - // read previously written value back from EEPROM address 5 - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - - i2c_write(0x05); // write address = 5 - i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode - - ret = i2c_readNak(); // read one byte from EEPROM - i2c_stop(); - - for(;;); - } - @endcode - -*/ -#endif /* DOXYGEN */ - -/**@{*/ - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 -#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" -#endif - -#include - -/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_READ 1 - -/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_WRITE 0 - - -/** - @brief initialize the I2C master interace. Need to be called only once - @param void - @return none - */ -extern void i2c_init(void); - - -/** - @brief Terminates the data transfer and releases the I2C bus - @param void - @return none - */ -extern void i2c_stop(void); - - -/** - @brief Issues a start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_start(unsigned char addr); - - -/** - @brief Issues a repeated start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_rep_start(unsigned char addr); - - -/** - @brief Issues a start condition and sends address and transfer direction - - If device is busy, use ack polling to wait until device ready - @param addr address and transfer direction of I2C device - @return none - */ -extern void i2c_start_wait(unsigned char addr); - - -/** - @brief Send one byte to I2C device - @param data byte to be transfered - @retval 0 write successful - @retval 1 write failed - */ -extern unsigned char i2c_write(unsigned char data); - - -/** - @brief read one byte from the I2C device, request more data from device - @return byte read from I2C device - */ -extern unsigned char i2c_readAck(void); - -/** - @brief read one byte from the I2C device, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_readNak(void); - -/** - @brief read one byte from the I2C device - - Implemented as a macro, which calls either i2c_readAck or i2c_readNak - - @param ack 1 send ack, request more data from device
- 0 send nak, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_read(unsigned char ack); -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - - -/**@}*/ -#endif diff --git a/keyboards/ergodox80/ergodox80/matrix.c b/keyboards/ergodox80/ergodox80/matrix.c deleted file mode 100644 index c352924b5..000000000 --- a/keyboards/ergodox80/ergodox80/matrix.c +++ /dev/null @@ -1,382 +0,0 @@ -/* - -Note for ErgoDox EZ customizers: Here be dragons! -This is not a file you want to be messing with. -All of the interesting stuff for you is under keymaps/ :) -Love, Erez - -Copyright 2013 Oleg Kostyuk - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include "wait.h" -#include "action_layer.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "ergodox80.h" -#include "i2cmaster.h" -#ifdef DEBUG_MATRIX_SCAN_RATE -#include "timer.h" -#endif - -/* - * This constant define not debouncing time in msecs, but amount of matrix - * scan loops which should be made to get stable debounced results. - * - * On Ergodox matrix scan rate is relatively low, because of slow I2C. - * Now it's only 317 scans/second, or about 3.15 msec/scan. - * According to Cherry specs, debouncing time is 5 msec. - * - * And so, there is no sense to have DEBOUNCE higher than 2. - */ - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(uint8_t row); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -static uint8_t mcp23018_reset_loop; - -#ifdef DEBUG_MATRIX_SCAN_RATE -uint32_t matrix_timer; -uint32_t matrix_scan_count; -#endif - - -__attribute__ ((weak)) -void matrix_init_user(void) {} - -__attribute__ ((weak)) -void matrix_scan_user(void) {} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // initialize row and col - - mcp23018_status = init_mcp23018(); - - - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - -#ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; -#endif - - matrix_init_kb(); - -} - -void matrix_power_up(void) { - mcp23018_status = init_mcp23018(); - - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - -#ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; -#endif - -} - -uint8_t matrix_scan(void) -{ - if (mcp23018_status) { // if there was an error - if (++mcp23018_reset_loop == 0) { - // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans - // this will be approx bit more frequent than once per second - print("trying to reset mcp23018\n"); - mcp23018_status = init_mcp23018(); - if (mcp23018_status) { - print("left side not responding\n"); - } else { - print("left side attached\n"); - ergodox_blink_all_leds(); - } - } - } - -#ifdef DEBUG_MATRIX_SCAN_RATE - matrix_scan_count++; - - uint32_t timer_now = timer_read32(); - if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { - print("matrix scan frequency: "); - pdec(matrix_scan_count); - print("\n"); - - matrix_timer = timer_now; - matrix_scan_count = 0; - } -#endif - - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(i); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_us(1); - // this should be wait_ms(1) but has been left as-is at EZ's request - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< http://jump.to/fleury -* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device with hardware TWI -* Usage: API compatible with I2C Software Library i2cmaster.h -**************************************************************************/ -#include -#include - -#include - - -/* define CPU frequency in Mhz here if not defined in Makefile */ -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -/* I2C clock in Hz */ -#define SCL_CLOCK 400000L - - -/************************************************************************* - Initialization of the I2C bus interface. Need to be called only once -*************************************************************************/ -void i2c_init(void) -{ - /* initialize TWI clock - * minimal values in Bit Rate Register (TWBR) and minimal Prescaler - * bits in the TWI Status Register should give us maximal possible - * I2C bus speed - about 444 kHz - * - * for more details, see 20.5.2 in ATmega16/32 secification - */ - - TWSR = 0; /* no prescaler */ - TWBR = 10; /* must be >= 10 for stable operation */ - -}/* i2c_init */ - - -/************************************************************************* - Issues a start condition and sends address and transfer direction. - return 0 = device accessible, 1= failed to access device -*************************************************************************/ -unsigned char i2c_start(unsigned char address) -{ - uint8_t twst; - - // send START condition - TWCR = (1<= 0: - if section['name'] == 'layout_config': - config.update(loads("\n".join( - section['code_lines'] - ))) - elif section['sub_name'].startswith('layer'): - layer_name = section['sub_name'] - config['layer_lines'][layer_name] = section['code_lines'] - - reset_section() - - def amend_section(line_index, line): - section['end_line'] = line_index - section['code_lines'].append(line) - - config = DEFAULT_CONFIG.copy() - config.update({ - 'layer_lines': collections.OrderedDict(), - 'macro_ids': {'UM'}, - 'unicode_macros': {}, - }) - - section = {} - reset_section() - - with io.open(path, encoding="utf-8") as fh: - for i, line in enumerate(fh): - if line.startswith("#"): - start_section(i, line) - elif line.startswith(" "): - amend_section(i, line[4:]) - else: - # TODO: maybe parse description - pass - - end_section() - assert 'layout' in config - return config - -# header file parsing - -IF0_RE = re.compile(r""" - ^ - #if 0 - $.*? - #endif -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -COMMENT_RE = re.compile(r""" - /\* - .*? - \*/" -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -def read_header_file(path): - with io.open(path, encoding="utf-8") as fh: - data = fh.read() - data, _ = COMMENT_RE.subn("", data) - data, _ = IF0_RE.subn("", data) - return data - - -def regex_partial(re_str_fmt, flags): - def partial(*args, **kwargs): - re_str = re_str_fmt.format(*args, **kwargs) - return re.compile(re_str, flags) - return partial - - -KEYDEF_REP = regex_partial(r""" - #define - \s - ( - (?:{}) # the prefixes - (?:\w+) # the key name - ) # capture group end -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -ENUM_RE = re.compile(r""" - ( - enum - \s\w+\s - \{ - .*? # the enum content - \} - ; - ) # capture group end -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -ENUM_KEY_REP = regex_partial(r""" - ( - {} # the prefixes - \w+ # the key name - ) # capture group end -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -def parse_keydefs(config, data): - prefix_options = "|".join(config['key_prefixes']) - keydef_re = KEYDEF_REP(prefix_options) - enum_key_re = ENUM_KEY_REP(prefix_options) - for match in keydef_re.finditer(data): - yield match.groups()[0] - - for enum_match in ENUM_RE.finditer(data): - enum = enum_match.groups()[0] - for key_match in enum_key_re.finditer(enum): - yield key_match.groups()[0] - - -def parse_valid_keys(config, out_path): - basepath = os.path.abspath(os.path.join(os.path.dirname(out_path))) - dirpaths = [] - subpaths = [] - while len(subpaths) < 6: - path = os.path.join(basepath, *subpaths) - dirpaths.append(path) - dirpaths.append(os.path.join(path, "tmk_core", "common")) - dirpaths.append(os.path.join(path, "quantum")) - subpaths.append('..') - - includes = set(config['keymaps_includes']) - includes.add("keycode.h") - - valid_keycodes = set() - for dirpath, include in it.product(dirpaths, includes): - include_path = os.path.join(dirpath, include) - if os.path.exists(include_path): - header_data = read_header_file(include_path) - valid_keycodes.update( - parse_keydefs(config, header_data) - ) - return valid_keycodes - - -# Keymap Parsing - -def iter_raw_codes(layer_lines, filler, separator): - filler_re = re.compile("[" + filler + " ]") - for line in layer_lines: - line, _ = filler_re.subn("", line.strip()) - if not line: - continue - codes = line.split(separator) - for code in codes[1:-1]: - yield code - - -def iter_indexed_codes(raw_codes, key_indexes): - key_rows = {} - key_indexes_flat = [] - - for row_index, key_indexes in enumerate(key_indexes): - for key_index in key_indexes: - key_rows[key_index] = row_index - key_indexes_flat.extend(key_indexes) - assert len(raw_codes) == len(key_indexes_flat) - for raw_code, key_index in zip(raw_codes, key_indexes_flat): - # we keep track of the row mostly for layout purposes - yield raw_code, key_index, key_rows[key_index] - - -LAYER_CHANGE_RE = re.compile(r""" - (DF|TG|MO)\(\d+\) -""", re.VERBOSE) - - -MACRO_RE = re.compile(r""" - M\(\w+\) -""", re.VERBOSE) - - -UNICODE_RE = re.compile(r""" - U[0-9A-F]{4} -""", re.VERBOSE) - - -NON_CODE = re.compile(r""" - ^[^A-Z0-9_]$ -""", re.VERBOSE) - - -def parse_uni_code(raw_code): - macro_id = "UC_" + ( - unicodedata.name(raw_code) - .replace(" ", "_") - .replace("-", "_") - ) - code = "M({})".format(macro_id) - uc_hex = "{:04X}".format(ord(raw_code)) - return code, macro_id, uc_hex - - -def parse_key_code(raw_code, key_prefixes, valid_keycodes): - if raw_code in valid_keycodes: - return raw_code - - for prefix in key_prefixes: - code = prefix + raw_code - if code in valid_keycodes: - return code - - -def parse_code(raw_code, key_prefixes, valid_keycodes): - if not raw_code: - return 'KC_TRNS', None, None - - if LAYER_CHANGE_RE.match(raw_code): - return raw_code, None, None - - if MACRO_RE.match(raw_code): - macro_id = raw_code[2:-1] - return raw_code, macro_id, None - - if UNICODE_RE.match(raw_code): - hex_code = raw_code[1:] - return parse_uni_code(chr(int(hex_code, 16))) - - if NON_CODE.match(raw_code): - return parse_uni_code(raw_code) - - code = parse_key_code(raw_code, key_prefixes, valid_keycodes) - return code, None, None - - -def parse_keymap(config, key_indexes, layer_lines, valid_keycodes): - keymap = {} - raw_codes = list(iter_raw_codes( - layer_lines, config['filler'], config['separator'] - )) - indexed_codes = iter_indexed_codes(raw_codes, key_indexes) - key_prefixes = config['key_prefixes'] - for raw_code, key_index, row_index in indexed_codes: - code, macro_id, uc_hex = parse_code( - raw_code, key_prefixes, valid_keycodes - ) - # TODO: line numbers for invalid codes - err_msg = "Could not parse key '{}' on row {}".format( - raw_code, row_index - ) - assert code is not None, err_msg - # print(repr(raw_code), repr(code), macro_id, uc_hex) - if macro_id: - config['macro_ids'].add(macro_id) - if uc_hex: - config['unicode_macros'][macro_id] = uc_hex - keymap[key_index] = (code, row_index) - return keymap - - -def parse_keymaps(config, valid_keycodes): - keymaps = collections.OrderedDict() - key_indexes = config.get( - 'key_indexes', KEYBOARD_LAYOUTS[config['layout']] - ) - # TODO: maybe validate key_indexes - - for layer_name, layer_lines, in config['layer_lines'].items(): - keymaps[layer_name] = parse_keymap( - config, key_indexes, layer_lines, valid_keycodes - ) - return keymaps - -# keymap.c output - -USERCODE = """ -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - case L1: - ergodox_right_led_1_on(); - break; - case L2: - ergodox_right_led_2_on(); - break; - case L3: - ergodox_right_led_3_on(); - break; - case L4: - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - break; - case L5: - ergodox_right_led_1_on(); - ergodox_right_led_3_on(); - break; - // case L6: - // ergodox_right_led_2_on(); - // ergodox_right_led_3_on(); - // break; - // case L7: - // ergodox_right_led_1_on(); - // ergodox_right_led_2_on(); - // ergodox_right_led_3_on(); - // break; - default: - ergodox_board_led_off(); - break; - } -}; -""" - -MACROCODE = """ -#define UC_MODE_WIN 0 -#define UC_MODE_LINUX 1 -#define UC_MODE_OSX 2 - -// TODO: allow default mode to be configured -static uint16_t unicode_mode = UC_MODE_WIN; - -uint16_t hextokeycode(uint8_t hex) {{ - if (hex == 0x0) {{ - return KC_P0; - }} - if (hex < 0xA) {{ - return KC_P1 + (hex - 0x1); - }} - return KC_A + (hex - 0xA); -}} - -void unicode_action_function(uint16_t hi, uint16_t lo) {{ - switch (unicode_mode) {{ - case UC_MODE_WIN: - register_code(KC_LALT); - - register_code(KC_PPLS); - unregister_code(KC_PPLS); - - register_code(hextokeycode((hi & 0xF0) >> 4)); - unregister_code(hextokeycode((hi & 0xF0) >> 4)); - register_code(hextokeycode((hi & 0x0F))); - unregister_code(hextokeycode((hi & 0x0F))); - register_code(hextokeycode((lo & 0xF0) >> 4)); - unregister_code(hextokeycode((lo & 0xF0) >> 4)); - register_code(hextokeycode((lo & 0x0F))); - unregister_code(hextokeycode((lo & 0x0F))); - - unregister_code(KC_LALT); - break; - case UC_MODE_LINUX: - register_code(KC_LCTL); - register_code(KC_LSFT); - - register_code(KC_U); - unregister_code(KC_U); - - register_code(hextokeycode((hi & 0xF0) >> 4)); - unregister_code(hextokeycode((hi & 0xF0) >> 4)); - register_code(hextokeycode((hi & 0x0F))); - unregister_code(hextokeycode((hi & 0x0F))); - register_code(hextokeycode((lo & 0xF0) >> 4)); - unregister_code(hextokeycode((lo & 0xF0) >> 4)); - register_code(hextokeycode((lo & 0x0F))); - unregister_code(hextokeycode((lo & 0x0F))); - - unregister_code(KC_LCTL); - unregister_code(KC_LSFT); - break; - case UC_MODE_OSX: - break; - }} -}} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {{ - if (!record->event.pressed) {{ - return MACRO_NONE; - }} - // MACRODOWN only works in this function - switch(id) {{ - case UM: - unicode_mode = (unicode_mode + 1) % 2; - break; -{macro_cases} -{unicode_macro_cases} - default: - break; - }} - return MACRO_NONE; -}}; -""" - - -UNICODE_MACRO_TEMPLATE = """ -case {macro_id}: - unicode_action_function(0x{hi:02x}, 0x{lo:02x}); - break; -""".strip() - - -def unicode_macro_cases(config): - for macro_id, uc_hex in config['unicode_macros'].items(): - hi = int(uc_hex, 16) >> 8 - lo = int(uc_hex, 16) & 0xFF - unimacro_keys = ", ".join( - "T({})".format( - "KP_" + digit if digit.isdigit() else digit - ) for digit in uc_hex - ) - yield UNICODE_MACRO_TEMPLATE.format( - macro_id=macro_id, hi=hi, lo=lo - ) - - -def iter_keymap_lines(keymap, row_indents=None): - col_widths = {} - col = 0 - # first pass, figure out the column widths - prev_row_index = None - for code, row_index in keymap.values(): - if row_index != prev_row_index: - col = 0 - if row_indents: - col = row_indents[row_index] - col_widths[col] = max(len(code), col_widths.get(col, 0)) - prev_row_index = row_index - col += 1 - - # second pass, yield the cell values - col = 0 - prev_row_index = None - for key_index in sorted(keymap): - code, row_index = keymap[key_index] - if row_index != prev_row_index: - col = 0 - yield "\n" - if row_indents: - for indent_col in range(row_indents[row_index]): - pad = " " * (col_widths[indent_col] - 4) - yield (" /*-*/" + pad) - col = row_indents[row_index] - else: - yield pad - yield " {}".format(code) - if key_index < len(keymap) - 1: - yield "," - # This will be yielded on the next iteration when - # we know that we're not at the end of a line. - pad = " " * (col_widths[col] - len(code)) - prev_row_index = row_index - col += 1 - - -def iter_keymap_parts(config, keymaps): - # includes - for include_path in config['keymaps_includes']: - yield '#include "{}"\n'.format(include_path) - - yield "\n" - - # definitions - for i, macro_id in enumerate(sorted(config['macro_ids'])): - yield "#define {} {}\n".format(macro_id, i) - - yield "\n" - - for i, layer_name in enumerate(config['layer_lines']): - yield '#define L{0:<3} {0:<5} // {1}\n'.format(i, layer_name) - - yield "\n" - - # keymaps - yield "const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\n" - - for i, layer_name in enumerate(config['layer_lines']): - # comment - layer_lines = config['layer_lines'][layer_name] - prefixed_lines = " * " + " * ".join(layer_lines) - yield "/*\n{} */\n".format(prefixed_lines) - - # keymap codes - keymap = keymaps[layer_name] - row_indents = ROW_INDENTS.get(config['layout']) - keymap_lines = "".join(iter_keymap_lines(keymap, row_indents)) - yield "[L{0}] = KEYMAP({1}\n),\n".format(i, keymap_lines) - - yield "};\n\n" - - # no idea what this is for - yield "const uint16_t PROGMEM fn_actions[] = {};\n" - - # macros - yield MACROCODE.format( - macro_cases="", - unicode_macro_cases="\n".join(unicode_macro_cases(config)), - ) - - # TODO: dynamically create blinking lights - yield USERCODE - - -def main(argv=sys.argv[1:]): - if not argv or '-h' in argv or '--help' in argv: - print(__doc__) - return 0 - - in_path = os.path.abspath(argv[0]) - if not os.path.exists(in_path): - print("No such file '{}'".format(in_path)) - return 1 - - if len(argv) > 1: - out_path = os.path.abspath(argv[1]) - else: - dirname = os.path.dirname(in_path) - out_path = os.path.join(dirname, "keymap.c") - - config = parse_config(in_path) - valid_keys = parse_valid_keys(config, out_path) - keymaps = parse_keymaps(config, valid_keys) - - with io.open(out_path, mode="w", encoding="utf-8") as fh: - for part in iter_keymap_parts(config, keymaps): - fh.write(part) - - -if __name__ == '__main__': - sys.exit(main()) diff --git a/keyboards/ergodox80/ergodox80/util/readme.md b/keyboards/ergodox80/ergodox80/util/readme.md deleted file mode 100644 index 26c5e5d99..000000000 --- a/keyboards/ergodox80/ergodox80/util/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ErgoDox EZ Utilities - -The Python script in this directory, by [mbarkhau](https://github.com/mbarkhau) allows you to write out a basic ErgoDox EZ keymap using Markdown notation, and then transpile it to C, which you can then compile. It's experimental, but if you're not comfortable using C, it's a nice option. diff --git a/keyboards/ergodox80/keymaps/default/keymap.c b/keyboards/ergodox80/keymaps/default/keymap.c deleted file mode 100644 index 2da2c5b0e..000000000 --- a/keyboards/ergodox80/keymaps/default/keymap.c +++ /dev/null @@ -1,183 +0,0 @@ -#include "ergodox80.h" -#include "debug.h" -#include "action_layer.h" -#include "version.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | 1 | 2 | Home | | PgUp | 3 | 4 | - * |------|------|------| |------|--------|------| - * | Space| BkSp | End | | PgDn | Tab |Enter | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP( // layer 0 : default - // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_1, KC_2, KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP,KC_3, KC_4, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * |------|------|------| |------|------|------| - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP( - // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+----------. - * | | | | | | | | - * |------|------|------| |------|------|----------| - * | | | | | | |BrwserBack| - * `--------------------' `------------------------' - */ -// MEDIA AND MOUSE -[MDIA] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; diff --git a/keyboards/ergodox80/readme.md b/keyboards/ergodox80/readme.md deleted file mode 100644 index b5c09f922..000000000 --- a/keyboards/ergodox80/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Ergodox 80 key support - -This is based on the ergodox-ez qmk firmware but is for ergodoxes with 80 keys. - - - diff --git a/keyboards/ergodox80/rules.mk b/keyboards/ergodox80/rules.mk deleted file mode 100644 index ac63d4eff..000000000 --- a/keyboards/ergodox80/rules.mk +++ /dev/null @@ -1,28 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= yes # Unicode -- cgit v1.2.3 From e5396ca9e5ccb714a757b6559c9f7e95bf372e3f Mon Sep 17 00:00:00 2001 From: Nathan Sharfi Date: Wed, 7 Sep 2016 18:23:01 -0700 Subject: zweihander: rename to Makefile --- keyboards/ergodox/keymaps/zweihander-osx/Makefile | 2 ++ keyboards/ergodox/keymaps/zweihander-osx/makefile.mk | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) create mode 100644 keyboards/ergodox/keymaps/zweihander-osx/Makefile delete mode 100644 keyboards/ergodox/keymaps/zweihander-osx/makefile.mk (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/zweihander-osx/Makefile b/keyboards/ergodox/keymaps/zweihander-osx/Makefile new file mode 100644 index 000000000..6e3d088a4 --- /dev/null +++ b/keyboards/ergodox/keymaps/zweihander-osx/Makefile @@ -0,0 +1,2 @@ +# Don’t do a tricolor wave when the computer is shut down in Windows +SLEEP_LED_ENABLE = no diff --git a/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk b/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk deleted file mode 100644 index 6e3d088a4..000000000 --- a/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk +++ /dev/null @@ -1,2 +0,0 @@ -# Don’t do a tricolor wave when the computer is shut down in Windows -SLEEP_LED_ENABLE = no -- cgit v1.2.3 From 273a6cc688ef4c8f7964d8c62147c8697db42cde Mon Sep 17 00:00:00 2001 From: Nathan Sharfi Date: Wed, 7 Sep 2016 20:28:31 -0700 Subject: - Make thumb-accessible ⌥ and ⌃ into right-⌥ and right-⌃ - remove media-space and media-shift-space; put a play/pause key at media-m instead - add print screen, scroll lock, and pause/break to the media layer And in the readme: - don't say we don't have any Windows-specific keys - add mnemonics for thumb-alt and thumb-ctrl positioning --- keyboards/ergodox/keymaps/zweihander-osx/keymap.c | 14 +++++++------- keyboards/ergodox/keymaps/zweihander-osx/readme.markdown | 8 +++++--- 2 files changed, 12 insertions(+), 10 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c index d6d66fd55..725a73e34 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c +++ b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,------|------|------| |------+--------+------. * | | | PgUp | | PgDn | | | * | | ⇥ |------| |------| ⇥ |Enter | - * | | | L⌥ | | L⌃ | | | + * | | | R⌥ | | R⌃ | | | * `--------------------' `----------------------' */ // If it accepts an argument (i.e, is a function), it doesn't need KC_. @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI,KC_LEFT,KC_RGHT, KC_GRV, KC_QUOT, KC_PGUP, - KC_SPC,KC_TAB ,KC_LALT, + KC_SPC,KC_TAB ,KC_RALT, // right hand TG(SYMB), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, MO(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, @@ -55,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_SPC , KC_ESC, KC_BSPC, KC_PGDN, - KC_LCTL, KC_TAB, KC_ENT + KC_RCTL, KC_TAB, KC_ENT ), /* Keymap 1: Symbol Layer * @@ -102,13 +102,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 2: Media keys * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F14 | F15 | | | | | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | + * | | F14 | F15 |PrtScr|SclLck| Pause| | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | PgUp |⌘S⌘⇥⌘R| Term | | | | ⌘] | ⌥⌘↑ | ↑ | ⌥⌘↓ | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | |Safari| PgDn | | |------| |------| ⌘[ | ← | ↓ | → | | ⏯ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | |BBEdit| | | |L⇧+Spc| Spc | ⏮ | ⏭ | | | + * | | | | | |BBEdit| | | | | ⏯ | ⏮ | ⏭ | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * | | | | | | |VolUp |VolDn | Mute | | | * `----------------------------------' `----------------------------------' @@ -122,7 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ // MEDIA AND MOUSE [MDIA] = KEYMAP( - KC_TRNS, KC_F14 , KC_F15 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, /* F14 dims screen, F15 brightens */ + KC_TRNS, KC_F14 , KC_F15 , KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, /* F14 dims screen, F15 brightens */ KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, M(SGWF), M(TMNL), KC_TRNS, KC_TRNS, KC_TRNS, M(SAFA), KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(BBED), KC_TRNS, @@ -134,7 +134,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LGUI(KC_Q), LGUI(KC_W), LGUI(LSFT(KC_GRV)), LGUI(KC_GRV), KC_TRNS, KC_TRNS, KC_PWR , KC_TRNS, LGUI(KC_RBRC), LGUI(LALT(KC_UP)), KC_UP , LGUI(LALT(KC_DOWN)), KC_TRNS, KC_TRNS, LGUI(KC_LBRC), KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_MPLY, - KC_TRNS, LSFT(KC_SPC), KC_SPC , KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END , diff --git a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown index 3b7f52941..5125a12ee 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown +++ b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown @@ -7,7 +7,7 @@ This layout is tuned for people who… ## use OS X -This layout doesn’t make any concessions for Windows use. While it should work fine in Windows, I’m not about to devote precious keyboard space to Windows-specific shortcuts. +While this layout should work fine in Windows, it’s not tuned for it. No sane person who primarily uses Windows would put this many Windows keys on a keyboard layout. ## mouse left-handed while doing other things with the right hand @@ -21,8 +21,6 @@ I tend to have my mouse in my left hand, but I like to use my other hand to make - Go Up and Close Just-Left Folder (⌥⌘↑) - Cycle through open windows in current application (⌘\` and ⌘⇧\`) - Cycle through tabs in current window (⌥⇥ and ⌥⇧⇥) -- Space (page down in browsers; Quick Look in the Finder) -- Shift-Space (page up in web browsers) Because moving letter-by-letter is way slower than moving word-by-word, I added Option (⌥) to the bottommost button on the left side. This key can be held easily while holding ; (activate media layer) and pressing J and L to move left and right by word. @@ -34,11 +32,15 @@ I wanted to preserve the feel of a number of shortcuts that involve pressing lot - Empty Trash Without Asking for Confirmation (⇧⌥⌘⌫) - Shut Down Without Asking for Confirmation (⇧⌥⌘ power) +⇧⌥⌘⌫, when you press the backspace on the right half of the keyboard, is much more satisfying than if you curl your left hand into a claw to press all the keys on the left. Try both; you’ll agree. + ## use Emacs-style shortcuts I press C-a, C-e, and C-k all the time. It’s difficult to press these key combinations with the control key on the bottom left and I’m too quick on the draw for the control function on the / key to work reliably, so the bottommost thumb button on the right side is another control key. +Having trouble remembering which thumb key is alt and which is ctrl? It’s like on the lower right of a normal keyboard — leftmost is alt, rightmost is ctrl. + ## use spreadsheets -- cgit v1.2.3 From 740b4bbe463545c3547c41def88fa30abbc734fc Mon Sep 17 00:00:00 2001 From: Roman Zolotarev Date: Thu, 8 Sep 2016 21:12:34 +0800 Subject: Fix typo --- keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md index a86061285..4fa1814fb 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -20,7 +20,7 @@ It is `CTL_T(KC_ESC)` and it works this way: ## How to activate N-rollover -- Hold left `SHIFT` and right `SHIRT` and then tap `N`. +- Hold left `SHIFT` and right `SHIFT` and then tap `N`. ## How to make and flash on OS X -- cgit v1.2.3 From b83f76e1b070236344837cc6838852daa08e6436 Mon Sep 17 00:00:00 2001 From: profet23 Date: Thu, 8 Sep 2016 23:34:55 -0400 Subject: Changing keymap name to "profet_80" --- .../ergodox/ez/keymaps/default_80/ergodox80.png | Bin 20663 -> 0 bytes keyboards/ergodox/ez/keymaps/default_80/keymap.c | 183 --------------------- keyboards/ergodox/ez/keymaps/default_80/readme.md | 10 -- .../ergodox/ez/keymaps/profet_80/ergodox80.png | Bin 0 -> 20663 bytes keyboards/ergodox/ez/keymaps/profet_80/keymap.c | 183 +++++++++++++++++++++ keyboards/ergodox/ez/keymaps/profet_80/readme.md | 10 ++ 6 files changed, 193 insertions(+), 193 deletions(-) delete mode 100644 keyboards/ergodox/ez/keymaps/default_80/ergodox80.png delete mode 100644 keyboards/ergodox/ez/keymaps/default_80/keymap.c delete mode 100644 keyboards/ergodox/ez/keymaps/default_80/readme.md create mode 100644 keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png create mode 100644 keyboards/ergodox/ez/keymaps/profet_80/keymap.c create mode 100644 keyboards/ergodox/ez/keymaps/profet_80/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png deleted file mode 100644 index 66b9752eb..000000000 Binary files a/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png and /dev/null differ diff --git a/keyboards/ergodox/ez/keymaps/default_80/keymap.c b/keyboards/ergodox/ez/keymaps/default_80/keymap.c deleted file mode 100644 index 505ff2972..000000000 --- a/keyboards/ergodox/ez/keymaps/default_80/keymap.c +++ /dev/null @@ -1,183 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" -#include "version.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | 1 | 2 | Home | | PgUp | 3 | 4 | - * |------|------|------| |------|--------|------| - * | Space| BkSp | End | | PgDn | Tab |Enter | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP_80( // layer 0 : default - // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_1, KC_2, KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP,KC_3, KC_4, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * |------|------|------| |------|------|------| - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP_80( - // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+----------. - * | | | | | | | | - * |------|------|------| |------|------|----------| - * | | | | | | |BrwserBack| - * `--------------------' `------------------------' - */ -// MEDIA AND MOUSE -[MDIA] = KEYMAP_80( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; diff --git a/keyboards/ergodox/ez/keymaps/default_80/readme.md b/keyboards/ergodox/ez/keymaps/default_80/readme.md deleted file mode 100644 index b6bbb86d2..000000000 --- a/keyboards/ergodox/ez/keymaps/default_80/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# ErgoDox 80 Default Configuration - -This is based on the default Ergodox EZ keymap. -The difference is that this keymap supports 80 key layouts. -If you own an 80 key Ergodox, use this as an example to get your desired keymap. - -**NOTE:** This layout is not physically supported by the Ergodox EZ. - - -![Default80](ergodox80.png) diff --git a/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png new file mode 100644 index 000000000..66b9752eb Binary files /dev/null and b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png differ diff --git a/keyboards/ergodox/ez/keymaps/profet_80/keymap.c b/keyboards/ergodox/ez/keymaps/profet_80/keymap.c new file mode 100644 index 000000000..505ff2972 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | 1 | 2 | Home | | PgUp | 3 | 4 | + * |------|------|------| |------|--------|------| + * | Space| BkSp | End | | PgDn | Tab |Enter | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP_80( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_1, KC_2, KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP,KC_3, KC_4, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * |------|------|------| |------|------|------| + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP_80( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+----------. + * | | | | | | | | + * |------|------|------| |------|------|----------| + * | | | | | | |BrwserBack| + * `--------------------' `------------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP_80( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/profet_80/readme.md b/keyboards/ergodox/ez/keymaps/profet_80/readme.md new file mode 100644 index 000000000..b6bbb86d2 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/readme.md @@ -0,0 +1,10 @@ +# ErgoDox 80 Default Configuration + +This is based on the default Ergodox EZ keymap. +The difference is that this keymap supports 80 key layouts. +If you own an 80 key Ergodox, use this as an example to get your desired keymap. + +**NOTE:** This layout is not physically supported by the Ergodox EZ. + + +![Default80](ergodox80.png) -- cgit v1.2.3 From 9c2015ea7f23a69c1c585b1b366df5cbfd3e93c7 Mon Sep 17 00:00:00 2001 From: Lars Date: Thu, 8 Sep 2016 23:20:17 -0500 Subject: first commit of Absenth's Ergodox Firmware --- .../ergodox/keymaps/absenth/absenth_highres.png | Bin 0 -> 1463041 bytes keyboards/ergodox/keymaps/absenth/keymap.c | 183 +++++++++++++++++++++ keyboards/ergodox/keymaps/absenth/readme.md | 8 + 3 files changed, 191 insertions(+) create mode 100644 keyboards/ergodox/keymaps/absenth/absenth_highres.png create mode 100644 keyboards/ergodox/keymaps/absenth/keymap.c create mode 100644 keyboards/ergodox/keymaps/absenth/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png new file mode 100644 index 000000000..c07aa8803 Binary files /dev/null and b/keyboards/ergodox/keymaps/absenth/absenth_highres.png differ diff --git a/keyboards/ergodox/keymaps/absenth/keymap.c b/keyboards/ergodox/keymaps/absenth/keymap.c new file mode 100644 index 000000000..30f747419 --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/absenth/readme.md b/keyboards/ergodox/keymaps/absenth/readme.md new file mode 100644 index 000000000..35d0aad46 --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/readme.md @@ -0,0 +1,8 @@ +# ErgoDox EZ Absenth Configuration + +## Changelog + +* Sept. 8, 2016 (V0.1): + * Made A key double as MEDIA Layer change when you hold it. Added mouse buttons to the large thumb buttons on the left side on the Media Layer. Added vi/vim style arrow keys on HJKL on media layer. + +![Absenth](absenth_highres.png) -- cgit v1.2.3 From 52121cee7a9b26a6450db33ec34c8e4c8895aafc Mon Sep 17 00:00:00 2001 From: Lars Date: Thu, 8 Sep 2016 23:32:11 -0500 Subject: Updated Image Header --- .../ergodox/keymaps/absenth/absenth_highres.png | Bin 1463041 -> 1429453 bytes 1 file changed, 0 insertions(+), 0 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png index c07aa8803..a0596b281 100644 Binary files a/keyboards/ergodox/keymaps/absenth/absenth_highres.png and b/keyboards/ergodox/keymaps/absenth/absenth_highres.png differ -- cgit v1.2.3 From 1aeb59335f2fe67613df25308a630ca453975ac0 Mon Sep 17 00:00:00 2001 From: Didier Loiseau Date: Sun, 11 Sep 2016 02:19:55 +0200 Subject: Fixed compilation issues after the merge --- keyboard/ergodox_ez/keymaps/bepo/keymap.c | 527 --------------------- keyboards/ergodox/keymaps/bepo_csa/keymap.c | 527 +++++++++++++++++++++ .../keymap_extras/keymap_canadian_multilingual.h | 2 +- 3 files changed, 528 insertions(+), 528 deletions(-) delete mode 100644 keyboard/ergodox_ez/keymaps/bepo/keymap.c create mode 100644 keyboards/ergodox/keymaps/bepo_csa/keymap.c (limited to 'keyboards/ergodox') diff --git a/keyboard/ergodox_ez/keymaps/bepo/keymap.c b/keyboard/ergodox_ez/keymaps/bepo/keymap.c deleted file mode 100644 index 7097d641d..000000000 --- a/keyboard/ergodox_ez/keymaps/bepo/keymap.c +++ /dev/null @@ -1,527 +0,0 @@ -/* TypeMatrix-2030-like keymap */ -#include "ergodox_ez.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" -#include "led.h" -#include "keymap_extras/keymap_bepo.h" -#include "keymap_extras/keymap_canadian_multilingual.h" - -enum layers { - LR_BASE, // default layer - LR_CSA, // BÉPO over Canadian Multilingual (CSA) - LR_CSA_SFT, // shifted BÉPO over CSA - LR_CSA_AGR, // altgr-ed BÉPO over CSA - LR_CSA_AGR_SFT, // altgr-shifted BÉPO over CSA - LR_NUMR, // numeric layer - LR_FN, // fn layer -}; - -#define IS_CA_MULT_ENABLED() (layer_state & (1 << LR_CSA)) - -enum macros { - // Characters that do not exist in CSA and must be implemented based on unicode support - // Note: these are intentionally declared first to be used as indexes in spec_chars below - UC_NDSH, // – - UC_MDSH, // — - UC_ELPS, // … - END_UC, // indicates the last unicode character macro - // other macros - M_CSA_SFT, // toggle shift on CSA - M_CSA_AGR_SFT, // toggle shift on LR_CSA_AGR (goes to LR_CSA_AGR_SFT) - M_CSA_SFT_AGR, // toggle AltGr on LR_CSA_SFT (goes to LR_CSA_AGR_SFT) - // macros for characters that need to be un-shifted in LR_CA_MULT_SHIFT - M_1, - M_2, - M_3, - M_4, - M_5, - M_6, - M_7, - M_8, - M_9, - M_0, - M_DEGR, - M_SCLN, - M_GRV, - M_NBSP, - // macros for characters that don't have a simple key combination in LR_CA_MULT_ALTGR - M_CRC, - // other layer macros - M_DBL0, // double 0 - M_FNLR, // fn layer - M_NMAL, // num+alt -}; - -#define CSA(name) M(M_CSA_##name) // calls a CSA macro - -const uint16_t unicode_chars[] = { - [UC_NDSH] = L'–', - [UC_MDSH] = L'—', - [UC_ELPS] = L'…', -}; - -/* shortcut for unicode character macros */ -#define MUC(name) M(UC_##name) // calls a unicode macro - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | $ | " | « | » | ( | ) | Del | | Del | @ | + | - | / | * | W | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | B | É | P | O | È |Backsp| |Backsp| ^ | V | D | L | J | Z | - * |--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| - * | = | A | U | I | E | , |------| |------| C | T | S | R | N | M | - * |--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| - * | LShift | À | Y | X | . | K | | | | ' | Q | G | H | F | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |LCtrl | fn | LGui |numAlt| LAlt | |Alt Gr| % | App | Ç | RCtrl| - * `----------------------------------' `----------------------------------' - * ,--------------. ,-------------. - * | Esc | num | | Left |Right | - * ,------+-------+------| |------+------+------. - * | | | PgUp | | Up | | | - * |Space | Home |------| |------| End |Space | - * | | | PgDn | | Down | | | - * `---------------------' `--------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[LR_BASE] = KEYMAP( // layer 0 : default - // left hand - BP_DLR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, - KC_TAB, BP_B, BP_ECUT, BP_P, BP_O, BP_EGRV, KC_BSPC, - BP_EQL, BP_A, BP_U, BP_I, BP_E, BP_COMM, - KC_LSFT, BP_AGRV, BP_Y, BP_X, BP_DOT, BP_K, KC_ENT, - KC_LCTL, M(M_FNLR), KC_LGUI, M(M_NMAL), KC_LALT, - - KC_ESC, TG(LR_NUMR), - KC_PGUP, - KC_SPC, KC_HOME, KC_PGDN, - - // right hand - KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, BP_W, - KC_BSPC, BP_DCRC, BP_V, BP_D, BP_L, BP_J, BP_Z, - BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, - KC_ENT, BP_APOS, BP_Q, BP_G, BP_H, BP_F, KC_RSFT, - BP_ALGR, BP_PERC, KC_APP, BP_CCED, KC_RCTL, - - KC_LEFT, KC_RGHT, - KC_UP, - KC_DOWN, KC_END, KC_SPC - ), -/** - * Same as default but for use with Canadian Multilingual on OS side - */ -[LR_CSA] = KEYMAP( - // left hand - KC_DLR, CSA_DQOT, CSA_LGIL, CSA_RGIL, KC_LPRN, KC_RPRN, KC_TRNS, - KC_TRNS, KC_B, CSA_ECUT, KC_P, KC_O, CSA_EGRV, KC_TRNS, - KC_EQL, KC_A, KC_U, KC_I, KC_E, KC_COMM, - CSA(SFT), CSA_AGRV, KC_Y, KC_X, KC_DOT, KC_K, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - - // right hand - KC_TRNS, KC_AT, KC_PLUS, KC_MINS, CSA_SLSH, KC_ASTR, KC_W, - KC_TRNS, CSA_DCRC, KC_V, KC_D, KC_L, KC_J, KC_Z, - KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, - KC_TRNS, CSA_APOS, KC_Q, KC_G, KC_H, KC_F, CSA(SFT), - MO(LR_CSA_AGR), KC_PERC, KC_TRNS, CSA_CCED, KC_LCTL, // RCTL has a special behaviour in CSA so use LCTL - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS - ), -/* Shifted BÉPO over Canadian Multilingual - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | # | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | ! | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | ° | | | | | ; |------| |------| | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | : | | | | | ? | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | ` | | | | - * `----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[LR_CSA_SFT] = KEYMAP( - // left hand - KC_HASH, M(M_1), M(M_2), M(M_3), M(M_4), M(M_5), KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - M(M_DEGR),KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(M_SCLN), - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COLN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - M(M_NBSP), KC_TRNS, KC_TRNS, - - // right hand - KC_TRNS, M(M_6), M(M_7), M(M_8), M(M_9), M(M_0), KC_TRNS, - KC_TRNS, KC_EXLM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, CSA_QEST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - CSA(SFT_AGR), M(M_GRV), KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, M(M_NBSP) - ), -/* AltGr-ed BÉPO over Canadian Multilingual - * "////" indicates that the key is disabled (unsupported bépo character) - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | – | — | < | > | [ | ] | | | | ^ | ± | //// | ÷ | × | dead ˘ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | |dead '| & | œ |dead `| | | | ¡ |dead ˇ| ð | //// | ij | ////// | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | ////// | æ | ù |dead "| € | ̛’ |------| |------| © | þ | ß | ® |dead ~| dead ¯ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | \ | { | } | … | ~ | | | | ¿ |dead °| μ | //// |dead ˛| | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | //// | |dead ¸| | - * `----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | _ | |------| |------| | _ | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[LR_CSA_AGR] = KEYMAP( - // left hand - MUC(NDSH), MUC(MDSH), CSA_LESS, CSA_GRTR, CSA_LBRC, CSA_RBRC, KC_TRNS, - KC_TRNS, CSA_PIPE, CSA_DACT, KC_AMPR, CSA_OE, CSA_DGRV, KC_TRNS, - KC_NO, CSA_AE, CSA_UGRV, CSA_DTRM, CSA_EURO, CSA_RQOT, - CSA(AGR_SFT), CSA_BSLS, CSA_LCBR, CSA_RCBR, MUC(ELPS), CSA_TILD, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_UNDS, CSA(AGR_SFT), KC_TRNS, - - // right hand - KC_TRNS, M(M_CRC), CSA_PSMS, KC_NO, CSA_DVSN, CSA_TIMS, CSA_DBRV, - KC_TRNS, CSA_IXLM, CSA_DCAR, CSA_ETH, KC_NO, CSA_IJ, KC_NO, - CSA_CPRT, CSA_THRN, CSA_SRPS, CSA_RTM, CSA_DTLD, CSA_DMCR, - KC_TRNS, CSA_IQST, CSA_DRNG, CSA_MU, KC_NO, CSA_DOGO, CSA(AGR_SFT), - KC_TRNS, KC_NO, KC_TRNS, CSA_DCED, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, CSA(AGR_SFT), KC_UNDS - ), -/* AltGr-shifted BÉPO over Canadian Multilingual - * "////" indicates that the key is disabled (unsupported bépo character or unused in bépo) - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ¶ | //// | “ | ” | //// | //// | | | | //// | ¬ | ¼ | ½ | ¾ | ////// | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ¦ | ˝ | § | Œ | ` | | | | //// | //// | Ð | //// | IJ | ////// | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | ////// | Æ | Ù |dead-˙| //// | //// |------| |------| //// | Þ | ẞ | ™ | //// | º | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | //// | ‘ | ’ | //// | //// | | | | //// | //// | //// | //// | ª | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[LR_CSA_AGR_SFT] = KEYMAP( - // left hand - CSA_PARG, KC_NO, CSA_LDQT, CSA_RDQT, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, CSA_BPIP, CSA_DDCT, CSA_SECT, S(CSA_OE), M(M_GRV), KC_TRNS, - KC_NO, S(CSA_AE), S(CSA_UGRV), CSA_DDTA, KC_NO, KC_NO, - CSA(AGR_SFT), KC_NO, CSA_LQOT, CSA_RQOT, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, CSA(AGR_SFT), KC_TRNS, - - // right hand - KC_TRNS, KC_NO, CSA_NEGT, CSA_1QRT, CSA_1HLF, CSA_3QRT, KC_NO, - KC_TRNS, KC_NO, KC_NO, S(CSA_ETH), KC_NO, S(CSA_IJ), KC_NO, - KC_NO, S(CSA_THRN), S(CSA_SRPS), CSA_TM, KC_NO, CSA_ORDO, - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, CSA_ORDA, CSA(AGR_SFT), - CSA(SFT_AGR), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, CSA(AGR_SFT), KC_TRNS - ), -/* Numeric Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | 0 | 00 | . |Etr/Ctl| - * `----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | | | |n.lock|c.lock| - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[LR_NUMR] = KEYMAP( - // left hand - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, - KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS, - - // right hand - KC_TRNS, KC_F6, KC_F7, KC_TAB, KC_PSLS, KC_PAST, KC_PMNS, - KC_TRNS, KC_TRNS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_UP, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LEFT, KC_DOWN, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_TRNS, KC_P0, M(M_DBL0),KC_PDOT, CTL_T(KC_PENT), - - KC_NLCK, KC_CAPS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* fn layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |~CA-mult| | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | |VolUp | | | | | | | | Pause | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | RESET | | | Calc | Mail |Browsr|------| |------| | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | App | cut | copy |paste | Mute |VolDn | | | | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | Next | | | | | - * | Mute | play |------| |------| | | - * | | | Prev | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[LR_FN] = KEYMAP( - TG(LR_CSA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - RESET, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, - KC_TRNS, KC_APP, S(KC_DELT), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_MPRV, - KC_MUTE, KC_MPLY, KC_MNXT, - - // right hand - KC_INS, KC_EJCT, KC_PWR, KC_SLEP, KC_WAKE, KC_PSCR, KC_SLCK, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -}; - -const uint16_t PROGMEM fn_actions[] = { -}; - -void hold_shift(void) { - register_code(KC_LSHIFT); -} - -void release_shift(void) { - unregister_code(KC_LSHIFT); -} - -uint16_t hextokeycode(int hex) { - if (hex == 0x0) { - return KC_P0; - } else if (hex < 0xA) { - return KC_P1 + (hex - 0x1); - } else { - return KC_A + (hex - 0xA); - } -} - -void send_unicode(uint16_t unicode) -{ - // For more info on how this works per OS, see here: https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input - // Implemented for Windows: - // Pressing ALT followed by + followed by the unicode code point in hex. - // Requires registry key HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad set to String 1 - register_code(KC_LALT); - register_code(KC_PPLS); - unregister_code(KC_PPLS); - - for (int i = 12; i >= 0; i -= 4) { - register_code(hextokeycode((unicode >> i) & 0xF)); - unregister_code(hextokeycode((unicode >> i) & 0xF)); - } - - unregister_code(KC_LALT); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0 ... END_UC: - if (record->event.pressed) { - send_unicode(unicode_chars[id]); - } - break; - case M_CSA_SFT: - // BÉPO over CSA: toggle shift layer - layer_invert(LR_CSA_SFT); - if (record->event.pressed) { - hold_shift(); - } else { - release_shift(); - } - break; - case M_CSA_SFT_AGR: - // BÉPO over CSA: from shift layer, momentary altgr+shift layer - layer_invert(LR_CSA_AGR); - layer_invert(LR_CSA_AGR_SFT); - if (record->event.pressed) { - // shift not needed for LR_CSA_AGR_SFT - release_shift(); - } else { - // back to shift layer - hold_shift(); - } - break; - case M_CSA_AGR_SFT: - // BÉPO over CSA: from altgr layer, momentary altgr+shift layer - layer_invert(LR_CSA_SFT); - layer_invert(LR_CSA_AGR_SFT); - break; - case M_1 ... M_0: - case M_DEGR: - case M_SCLN: - case M_GRV: - case M_NBSP: - // macros of the shift layer that require to release shift - if (record->event.pressed) { - release_shift(); - switch (id) { - case M_1 ... M_0: - register_code(KC_1 + (id - M_1)); - break; - case M_DEGR: - return MACRO(DOWN(CSA_ALTGR), D(SCLN), END); - case M_SCLN: - return MACRO(D(SCLN), END); - case M_GRV: - return MACRO(I(75), DOWN(CSA_ALTGR), TYPE(CSA_DCRC), UP(CSA_ALTGR), T(SPACE), END); - case M_NBSP: - // use weak mod such that pressing another key will not be affected - add_weak_mods(MOD_BIT(CSA_ALTGR)); - return MACRO(D(SPACE), END); - } - } else { - hold_shift(); - switch (id) { - case M_1 ... M_0: - unregister_code(KC_1 + (id - M_1)); - break; - case M_DEGR: - return MACRO(UP(CSA_ALTGR), U(SCLN), END); - case M_SCLN: - return MACRO(U(SCLN), END); - case M_NBSP: - del_weak_mods(MOD_BIT(CSA_ALTGR)); - return MACRO(U(SPACE), END); - } - } - break; - case M_CRC: - if (record->event.pressed) { - return MACRO(I(75), TYPE(CSA_DCRC), T(SPACE), END); - } - break; - case M_DBL0: - if (record->event.pressed) { - return MACRO( I(25), T(P0), T(P0), END ); - } - break; - case M_FNLR: - layer_invert(LR_NUMR); - layer_invert(LR_FN); - break; - case M_NMAL: - layer_invert(LR_NUMR); - if (record->event.pressed) { - register_code(KC_LALT); - } else { - unregister_code(KC_LALT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - // led 1: numeric layer - if (layer_state & (1 << LR_NUMR)) { - ergodox_right_led_1_on(); - } - // led 2: BÉPO over Canadian Multilingual - if (IS_CA_MULT_ENABLED()) { - ergodox_right_led_2_on(); - } - // led 3: caps lock - if (host_keyboard_leds() & (1< | [ | ] | | | | ^ | ± | //// | ÷ | × | dead ˘ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | |dead '| & | œ |dead `| | | | ¡ |dead ˇ| ð | //// | ij | ////// | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ////// | æ | ù |dead "| € | ̛’ |------| |------| © | þ | ß | ® |dead ~| dead ¯ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | \ | { | } | … | ~ | | | | ¿ |dead °| μ | //// |dead ˛| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | //// | |dead ¸| | + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | _ | |------| |------| | _ | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_AGR] = KEYMAP( + // left hand + MUC(NDSH), MUC(MDSH), CSA_LESS, CSA_GRTR, CSA_LBRC, CSA_RBRC, KC_TRNS, + KC_TRNS, CSA_PIPE, CSA_DACT, KC_AMPR, CSA_OE, CSA_DGRV, KC_TRNS, + KC_NO, CSA_AE, CSA_UGRV, CSA_DTRM, CSA_EURO, CSA_RQOT, + CSA(AGR_SFT), CSA_BSLS, CSA_LCBR, CSA_RCBR, MUC(ELPS), CSA_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_UNDS, CSA(AGR_SFT), KC_TRNS, + + // right hand + KC_TRNS, M(M_CRC), CSA_PSMS, KC_NO, CSA_DVSN, CSA_TIMS, CSA_DBRV, + KC_TRNS, CSA_IXLM, CSA_DCAR, CSA_ETH, KC_NO, CSA_IJ, KC_NO, + CSA_CPRT, CSA_THRN, CSA_SRPS, CSA_RTM, CSA_DTLD, CSA_DMCR, + KC_TRNS, CSA_IQST, CSA_DRNG, CSA_MU, KC_NO, CSA_DOGO, CSA(AGR_SFT), + KC_TRNS, KC_NO, KC_TRNS, CSA_DCED, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_UNDS + ), +/* AltGr-shifted BÉPO over Canadian Multilingual + * "////" indicates that the key is disabled (unsupported bépo character or unused in bépo) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ¶ | //// | “ | ” | //// | //// | | | | //// | ¬ | ¼ | ½ | ¾ | ////// | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ¦ | ˝ | § | Œ | ` | | | | //// | //// | Ð | //// | IJ | ////// | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ////// | Æ | Ù |dead-˙| //// | //// |------| |------| //// | Þ | ẞ | ™ | //// | º | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | //// | ‘ | ’ | //// | //// | | | | //// | //// | //// | //// | ª | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_AGR_SFT] = KEYMAP( + // left hand + CSA_PARG, KC_NO, CSA_LDQT, CSA_RDQT, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, CSA_BPIP, CSA_DDCT, CSA_SECT, S(CSA_OE), M(M_GRV), KC_TRNS, + KC_NO, S(CSA_AE), S(CSA_UGRV), CSA_DDTA, KC_NO, KC_NO, + CSA(AGR_SFT), KC_NO, CSA_LQOT, CSA_RQOT, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_TRNS, + + // right hand + KC_TRNS, KC_NO, CSA_NEGT, CSA_1QRT, CSA_1HLF, CSA_3QRT, KC_NO, + KC_TRNS, KC_NO, KC_NO, S(CSA_ETH), KC_NO, S(CSA_IJ), KC_NO, + KC_NO, S(CSA_THRN), S(CSA_SRPS), CSA_TM, KC_NO, CSA_ORDO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, CSA_ORDA, CSA(AGR_SFT), + CSA(SFT_AGR), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_TRNS + ), +/* Numeric Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | 0 | 00 | . |Etr/Ctl| + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | |n.lock|c.lock| + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[LR_NUMR] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS, + + // right hand + KC_TRNS, KC_F6, KC_F7, KC_TAB, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_UP, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LEFT, KC_DOWN, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_TRNS, KC_P0, M(M_DBL0),KC_PDOT, CTL_T(KC_PENT), + + KC_NLCK, KC_CAPS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |~CA-mult| | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | |VolUp | | | | | | | | Pause | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | RESET | | | Calc | Mail |Browsr|------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | App | cut | copy |paste | Mute |VolDn | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | Next | | | | | + * | Mute | play |------| |------| | | + * | | | Prev | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[LR_FN] = KEYMAP( + TG(LR_CSA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + RESET, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, + KC_TRNS, KC_APP, S(KC_DELT), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_MPRV, + KC_MUTE, KC_MPLY, KC_MNXT, + + // right hand + KC_INS, KC_EJCT, KC_PWR, KC_SLEP, KC_WAKE, KC_PSCR, KC_SLCK, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +void hold_shift(void) { + register_code(KC_LSHIFT); +} + +void release_shift(void) { + unregister_code(KC_LSHIFT); +} + +uint16_t hextokeycode(int hex) { + if (hex == 0x0) { + return KC_P0; + } else if (hex < 0xA) { + return KC_P1 + (hex - 0x1); + } else { + return KC_A + (hex - 0xA); + } +} + +void send_unicode(uint16_t unicode) +{ + // For more info on how this works per OS, see here: https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input + // Implemented for Windows: + // Pressing ALT followed by + followed by the unicode code point in hex. + // Requires registry key HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad set to String 1 + register_code(KC_LALT); + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + for (int i = 12; i >= 0; i -= 4) { + register_code(hextokeycode((unicode >> i) & 0xF)); + unregister_code(hextokeycode((unicode >> i) & 0xF)); + } + + unregister_code(KC_LALT); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0 ... END_UC: + if (record->event.pressed) { + send_unicode(unicode_chars[id]); + } + break; + case M_CSA_SFT: + // BÉPO over CSA: toggle shift layer + layer_invert(LR_CSA_SFT); + if (record->event.pressed) { + hold_shift(); + } else { + release_shift(); + } + break; + case M_CSA_SFT_AGR: + // BÉPO over CSA: from shift layer, momentary altgr+shift layer + layer_invert(LR_CSA_AGR); + layer_invert(LR_CSA_AGR_SFT); + if (record->event.pressed) { + // shift not needed for LR_CSA_AGR_SFT + release_shift(); + } else { + // back to shift layer + hold_shift(); + } + break; + case M_CSA_AGR_SFT: + // BÉPO over CSA: from altgr layer, momentary altgr+shift layer + layer_invert(LR_CSA_SFT); + layer_invert(LR_CSA_AGR_SFT); + break; + case M_1 ... M_0: + case M_DEGR: + case M_SCLN: + case M_GRV: + case M_NBSP: + // macros of the shift layer that require to release shift + if (record->event.pressed) { + release_shift(); + switch (id) { + case M_1 ... M_0: + register_code(KC_1 + (id - M_1)); + break; + case M_DEGR: + return MACRO(DOWN(CSA_ALTGR), D(SCLN), END); + case M_SCLN: + return MACRO(D(SCLN), END); + case M_GRV: + return MACRO(I(75), DOWN(CSA_ALTGR), TYPE(CSA_DCRC), UP(CSA_ALTGR), T(SPACE), END); + case M_NBSP: + // use weak mod such that pressing another key will not be affected + add_weak_mods(MOD_BIT(CSA_ALTGR)); + return MACRO(D(SPACE), END); + } + } else { + hold_shift(); + switch (id) { + case M_1 ... M_0: + unregister_code(KC_1 + (id - M_1)); + break; + case M_DEGR: + return MACRO(UP(CSA_ALTGR), U(SCLN), END); + case M_SCLN: + return MACRO(U(SCLN), END); + case M_NBSP: + del_weak_mods(MOD_BIT(CSA_ALTGR)); + return MACRO(U(SPACE), END); + } + } + break; + case M_CRC: + if (record->event.pressed) { + return MACRO(I(75), TYPE(CSA_DCRC), T(SPACE), END); + } + break; + case M_DBL0: + if (record->event.pressed) { + return MACRO( I(25), T(P0), T(P0), END ); + } + break; + case M_FNLR: + layer_invert(LR_NUMR); + layer_invert(LR_FN); + break; + case M_NMAL: + layer_invert(LR_NUMR); + if (record->event.pressed) { + register_code(KC_LALT); + } else { + unregister_code(KC_LALT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + // led 1: numeric layer + if (layer_state & (1 << LR_NUMR)) { + ergodox_right_led_1_on(); + } + // led 2: BÉPO over Canadian Multilingual + if (IS_CA_MULT_ENABLED()) { + ergodox_right_led_2_on(); + } + // led 3: caps lock + if (host_keyboard_leds() & (1< 1463041 bytes keyboards/ergodox/keymaps/absenth/keymap.c | 12 ++++++------ keyboards/ergodox/keymaps/absenth/readme.md | 3 +++ 3 files changed, 9 insertions(+), 6 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png index a0596b281..c07aa8803 100644 Binary files a/keyboards/ergodox/keymaps/absenth/absenth_highres.png and b/keyboards/ergodox/keymaps/absenth/absenth_highres.png differ diff --git a/keyboards/ergodox/keymaps/absenth/keymap.c b/keyboards/ergodox/keymaps/absenth/keymap.c index 30f747419..ded668e13 100644 --- a/keyboards/ergodox/keymaps/absenth/keymap.c +++ b/keyboards/ergodox/keymaps/absenth/keymap.c @@ -15,9 +15,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * | BkSp | A/L2 | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * | LS/PO |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RS/PC | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | * `----------------------------------' `----------------------------------' @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_LSPO, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, ALT_T(KC_APP), KC_LGUI, KC_HOME, @@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSPC, KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, KC_LALT, CTL_T(KC_ESC), KC_PGUP, @@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | MsUp | | | | | | | | | | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * | | |MsLeft|MsDown|MsRght| |------| |------| left | down | up | down | | Play | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | | | | | | | | | | | Prev | Next | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | * ,------|------|------| |------+------+------. * | | | | | | |Brwser| - * | | |------| |------| |Back | + * | Lclk | Rclk |------| |------| |Back | * | | | | | | | | * `--------------------' `--------------------' */ diff --git a/keyboards/ergodox/keymaps/absenth/readme.md b/keyboards/ergodox/keymaps/absenth/readme.md index 35d0aad46..0c04bf417 100644 --- a/keyboards/ergodox/keymaps/absenth/readme.md +++ b/keyboards/ergodox/keymaps/absenth/readme.md @@ -2,6 +2,9 @@ ## Changelog + +* Sept. 14, 2016 (V0.2): + * Added Space Cadet to Left and Right Shift. Pressing Left shift with no other key adds an "(" and pressing Right shift with no other key adds an ")" * Sept. 8, 2016 (V0.1): * Made A key double as MEDIA Layer change when you hold it. Added mouse buttons to the large thumb buttons on the left side on the Media Layer. Added vi/vim style arrow keys on HJKL on media layer. -- cgit v1.2.3 From 3e128552d92714ff86d4378b4e3acccc62d6f132 Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Sun, 18 Sep 2016 11:48:47 +0200 Subject: Update the ergodox/algernon keymap to v1.7 Overall changes =============== * The number row has been completely rearranged on both the **Base** and the **ADORE** layers. * The number/function key behavior was changed: function keys are now on the **Media**. * The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the **Base** and **ADORE** layers. * The bottom large keys on the inner side of each half now function as [tmux](http://tmux.github.io/) keys: the left to send the prefix, the right to send the `display-panes` key. The left also doubles as a GNU screen prefix key, and sends `C-a` when double tapped. * A number of functions, such as the **AppSel** layer, now require the `hid-commands` tool to be running, with the output of `hid_listen` being piped to it. ADORE ===== * `Y` and `X` have been swapped again. Media/Navigation layer ====================== * The function keys are now on this layer. * Mouse keys have been removed. * Media start/stop/prev/next have been removed. * `Print screen` has been removed. * There is only one screen lock key now. Heatmap ======= * Fixed a few issues in the finger-stats calculation. * The tool now also timestamps and saves all input lines to a logfile, which it loads on start, allowing one to continue the collection after upgrading the tool. * The heatmap tool will now colorize the stats by default. * The periodic stats are now printed in a more compact format. Tools ===== * Added a new tool, `tools/layer-notify` that listens to layer change events on the HID console, and pops up a notification on layer changes. * Another new tool, `tools/text-to-log.py` has been added that converts arbitrary text to a keylogger output, which can be fed to the heatmap generator. * A number of features have been moved to the `tools/hid-commands` utility. These generally are OS dependent, and are easier to implement on the software side. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/Makefile | 4 +- .../keymaps/algernon/images/adore-layer.png | Bin 93893 -> 97225 bytes .../ergodox/keymaps/algernon/images/base-layer.png | Bin 95204 -> 102142 bytes .../ergodox/keymaps/algernon/images/heatmap.png | Bin 137912 -> 139351 bytes keyboards/ergodox/keymaps/algernon/keymap.c | 381 ++++++++++----------- keyboards/ergodox/keymaps/algernon/readme.md | 76 ++-- .../algernon/tools/heatmap-layout.ADORE.json | 132 ++----- .../algernon/tools/heatmap-layout.Dvorak.json | 129 ++----- .../ergodox/keymaps/algernon/tools/hid-commands | 61 ++++ .../ergodox/keymaps/algernon/tools/layer-notify | 12 + .../keymaps/algernon/tools/log-to-heatmap.py | 184 +++++++--- .../ergodox/keymaps/algernon/tools/max-focused | 5 - .../ergodox/keymaps/algernon/tools/text-to-log.py | 107 ++++++ 13 files changed, 616 insertions(+), 475 deletions(-) create mode 100755 keyboards/ergodox/keymaps/algernon/tools/hid-commands create mode 100755 keyboards/ergodox/keymaps/algernon/tools/layer-notify delete mode 100755 keyboards/ergodox/keymaps/algernon/tools/max-focused create mode 100755 keyboards/ergodox/keymaps/algernon/tools/text-to-log.py (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile index 7c2b3ad97..699add3dd 100644 --- a/keyboards/ergodox/keymaps/algernon/Makefile +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -7,7 +7,7 @@ CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes KEYLOGGER_ENABLE ?= yes UCIS_ENABLE = yes -MOUSEKEY_ENABLE ?= yes +MOUSEKEY_ENABLE = no AUTOLOG_ENABLE ?= no @@ -25,6 +25,8 @@ OPT_DEFS += -DKEYLOGGER_ENABLE CONSOLE_ENABLE = yes endif +OPT_DEFS += -DUSER_PRINT + KEYMAP_VERSION = $(shell \ if [ -d "${KEYMAP_PATH}/.git" ]; then \ cd "${KEYMAP_PATH}" && git describe --abbrev=6 --dirty --always --tags --match 'v*' 2>/dev/null; \ diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png index 3d0a5fb20..b611fbc42 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png and b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png index 7ea57aae3..2a981a470 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/base-layer.png and b/keyboards/ergodox/keymaps/algernon/images/base-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/heatmap.png b/keyboards/ergodox/keymaps/algernon/images/heatmap.png index 356035e0a..4f55c5adf 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/heatmap.png and b/keyboards/ergodox/keymaps/algernon/images/heatmap.png differ diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index 9f476d8a6..248a0ed30 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -8,7 +8,6 @@ #include "debug.h" #include "action_layer.h" #include "action_util.h" -#include "mousekey.h" #include "timer.h" #include "keymap_plover.h" #include "eeconfig.h" @@ -36,18 +35,6 @@ enum { A_PLVR, A_MPN, - // Function / number keys - KF_1, // 1, F1 - KF_2, // 2, F2 - KF_3, // ... - KF_4, - KF_5, - KF_6, - KF_7, - KF_8, - KF_9, - KF_10, - // Application select keys APP_SLK, // Slack APP_EMCS, // Emacs @@ -55,17 +42,6 @@ enum { APP_CHRM, // Chrome APP_MSIC, // Music - // Diagonal mouse movement - A_MUL, - A_MUR, - A_MDL, - A_MDR, - - // Mouse acceleration - A_ACL0, - A_ACL1, - A_ACL2, - // Hungarian layer keys HU_AA, // Á HU_OO, // Ó @@ -76,6 +52,18 @@ enum { HU_UE, // Ü HU_OEE, // Ő HU_UEE, // Ű + + // number/symbol keys + A_1, // 1 + A_2, // 2 + A_3, // ... + A_4, + A_5, + A_6, + A_7, + A_8, + A_9, + A_0, }; /* Fn keys */ @@ -95,7 +83,9 @@ enum { CT_CLN = 0, CT_TA, CT_LBP, - CT_RBP + CT_RBP, + CT_TMUX, + CT_TPS, }; /* States & timers */ @@ -114,6 +104,8 @@ bool log_enable = false; bool time_travel = false; +static uint8_t is_adore = 0; + /* The Keymap */ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -121,13 +113,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Base Layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * | Next/Prev | 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | F12 | 0 % | 2 ! | 4 # | 6 & | 8 | Plover | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| * | ~ | ' | , | . | P | Y | ( | | ) | F | G | C | R | L | \ | * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| : | | - |------+------+------+------+------+-----------| - * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | + * |-----------+------+------+------+------+------| tmux | | tmux |------+------+------+------+------+-----------| + * | Play/Pause| / | Q | J | K | X | | | Pane | B | M | W | V | Z | Stop | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * | | | | | : | | - | | | | | * `-----------------------------------' `-----------------------------------' @@ -141,22 +133,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = KEYMAP( // left hand - M(A_MPN) ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,TD(CT_LBP) -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,TD(CT_CLN) -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) + M(A_MPN) ,M(A_9) ,M(A_7) ,M(A_5) ,M(A_3) ,M(A_1) ,KC_F11 +,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,TD(CT_LBP) +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I +,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,TD(CT_TMUX) +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) ,F(F_ALT),F(F_GUI) ,F(F_CTRL) ,KC_BSPC,F(F_SFT),KC_ESC // right hand - ,KC_F12 ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS - ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_MINS ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP - ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_F12 ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR) + ,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS + ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL + ,TD(CT_TPS),KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP + ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,OSL(NMDIA),KC_DEL ,KC_LEAD @@ -166,15 +158,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 1: Adore layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * | Play/Pause| 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | F12 | 0 % | 2 ! | 4 # | 6 & | 8 | Plover | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | `~ | Y | W | G | L | M | ( | | ) | F | H | C | P | X | \ | + * | `~ | X | W | G | L | M | ( | | ) | F | H | C | P | Y | \ | * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | Z | Q | ' | , | . | : | | - | B | K | V | J | / | | + * |-----------+------+------+------+------+------| tmux | | tmux |------+------+------+------+------+-----------| + * | | Z | Q | ' | , | . | | | pane | B | K | V | J | / | | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | + * | | | | | : | | - | | | | | * `-----------------------------------' `-----------------------------------' * ,-------------. ,-------------. * | LAlt | GUI | | MDIA | Del | @@ -186,22 +178,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [ADORE] = KEYMAP( // left hand - KC_MPLY ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,KC_GRV ,KC_Y ,KC_W ,KC_G ,KC_L ,KC_M ,TD(CT_LBP) -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U -,KC_NO ,KC_Z ,KC_Q ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN) -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + KC_MPLY ,M(A_9) ,M(A_7) ,M(A_5) ,M(A_3) ,M(A_1) ,KC_F11 +,KC_GRV ,KC_X ,KC_W ,KC_G ,KC_L ,KC_M ,TD(CT_LBP) +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U +,KC_NO ,KC_Z ,KC_Q ,KC_QUOT ,KC_COMM ,KC_DOT ,TD(CT_TMUX) +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) ,F(F_ALT),F(F_GUI) ,F(F_CTRL) ,KC_BSPC,F(F_SFT),KC_ESC // right hand - ,KC_F12 ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_X ,KC_BSLS - ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_MINS ,KC_B ,KC_K ,KC_V ,KC_J ,KC_SLSH ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_F12 ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR) + ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS + ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL + ,TD(CT_TPS),KC_B ,KC_K ,KC_V ,KC_J ,KC_SLSH ,KC_NO + ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,OSL(NMDIA),KC_DEL ,F(F_HUN) @@ -350,45 +342,45 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 5: Navigation & Media layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | | + * | | F9 | F7 | F5 | F3 | F1 | | |ScrLCK| F10 | F2 | F4 | F6 | F8 | | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen| - * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------| - * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | | - * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------| - * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop | + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * | | | | | | | | | | | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * | Mute | VlUp | | BASE | MClk | + * | Mute | VlUp | | BASE | | * ,------|------|------| |------+------+------. - * | | | VlDn | | Prev |Left |Right | - * | SPC | Enter|------| |------| Click| Click| - * | | | ESC | | Next | | | + * | | | VlDn | | | | | + * | | |------| |------| | | + * | | | | | | | | * `--------------------' `--------------------' */ [NMDIA] = KEYMAP( // left hand - M(A_ACL0) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) -,M(A_ACL1) ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO -,M(A_ACL2) ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO -,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO + KC_NO ,KC_F9 ,KC_F7 ,KC_F5 ,KC_F3 ,KC_F1 ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_MUTE ,KC_VOLU ,KC_VOLD - ,KC_SPC,KC_ENTER,KC_ESC + ,KC_NO ,KC_NO ,KC_TRNS // right hand - ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR - ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO - ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP + ,LGUI(KC_L),KC_F10 ,KC_F2 ,KC_F4 ,KC_F6 ,KC_F8 ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_TRNS ,KC_MS_BTN3 - ,KC_MPRV - ,KC_MNXT ,KC_BTN1 ,KC_BTN2 + ,KC_TRNS ,KC_NO + ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ), /* Keymap 6: Steno for Plover @@ -514,40 +506,62 @@ static macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_c return MACRO_NONE; } -static bool from_appsel; +static void ang_handle_num_row(uint8_t id, keyrecord_t *record) { + uint8_t idx = id - A_1; + uint8_t kc; + static bool shifted[10]; -static void ang_handle_kf (keyrecord_t *record, uint8_t id) -{ - uint8_t code = id - KF_1; + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + if (record->event.pressed) + shifted[idx] = true; + } - if (record->event.pressed) { - kf_timers[code] = timer_read (); + if (!shifted[idx]) { + kc = idx + KC_1; } else { - uint8_t kc_base; - - if (from_appsel) { - from_appsel = false; + switch (id) { + case A_8: + case A_9: + shifted[idx] = false; return; - } - if (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM) { - // Long press - kc_base = KC_F1; - } else { - kc_base = KC_1; + case A_7: + kc = KC_2; + break; + case A_5: + kc = KC_8; + break; + case A_3: + kc = KC_6; + break; + case A_1: + kc = KC_4; + break; + + case A_0: + kc = KC_5; + break; + case A_2: + kc = KC_1; + break; + case A_4: + kc = KC_3; + break; + case A_6: + kc = KC_7; + break; } - kf_timers[code] = 0; - code += kc_base; + } - register_code (code); - unregister_code (code); + if (record->event.pressed) { + register_code (kc); + } else { + unregister_code (kc); + shifted[idx] = false; } } -static struct { - uint8_t idx; -} m_accel_state; - const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { switch(id) { @@ -592,70 +606,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case HU_UEE: return ang_do_hun (record, KC_EQL, KC_U); -#if MOUSEKEY_ENABLE - /* Mouse movement */ - case A_MUL: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - } - mousekey_send(); - break; - - case A_MUR: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - } - mousekey_send(); - break; - - case A_MDL: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - } - mousekey_send(); - break; - - case A_MDR: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - } - mousekey_send(); - break; - - case A_ACL0 ... A_ACL2: - if (record->event.pressed) { - uint8_t idx = id - A_ACL0; - if (m_accel_state.idx == id) { - mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); - m_accel_state.idx = 0; - } else { - if (m_accel_state.idx) { - mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); - m_accel_state.idx = 0; - } - mousekey_on(KC_ACL0 + idx); - m_accel_state.idx = id; - } - } - break; -#endif - /* Plover base */ case A_PLVR: toggle_steno(record->event.pressed); @@ -667,7 +617,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) register_code (KC_LGUI); if (record->tap.count && !record->tap.interrupted) { if (record->tap.count >= 2) { - register_code (KC_W); layer_on (APPSEL); set_oneshot_layer (APPSEL, ONESHOT_START); } @@ -678,7 +627,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } else { if (record->tap.count >= 2) { - unregister_code (KC_W); clear_oneshot_layer_state (ONESHOT_PRESSED); } gui_timer = timer_read (); @@ -686,43 +634,39 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) break; case APP_SLK: - from_appsel = true; - return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); + if (record->event.pressed) + uprintf("CMD:appsel_slack\n"); + break; case APP_EMCS: - from_appsel = true; - return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END); + if (record->event.pressed) + uprintf("CMD:appsel_emacs\n"); + break; case APP_TERM: - from_appsel = true; - if (!record->event.pressed) { - register_code(KC_ESC); - unregister_code(KC_ESC); - wait_ms(TAPPING_TERM + 25); - register_code(KC_DEL); - unregister_code(KC_DEL); - } + if (record->event.pressed) + uprintf("CMD:appsel_term\n"); break; case APP_CHRM: - from_appsel = true; - return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); + if (record->event.pressed) + uprintf("CMD:appsel_chrome\n"); + break; case APP_MSIC: - from_appsel = true; - return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); + if (record->event.pressed) + uprintf("CMD:appsel_music\n"); + break; - /* Function keys */ - case KF_1 ... KF_10: - ang_handle_kf (record, id); + // number row and symbols + case A_1 ... A_0: + ang_handle_num_row(id, record); break; } return MACRO_NONE; }; -static uint8_t is_adore = 0; - // Runs just one time when the keyboard initializes. void matrix_init_user(void) { uint8_t dl; @@ -805,6 +749,36 @@ static void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data layer_off (ARRW); } +static void ang_tap_dance_tmux_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_LALT); + register_code(KC_SPC); + unregister_code(KC_SPC); + unregister_code(KC_LALT); + } else { + register_code(KC_LCTL); + register_code(KC_A); + unregister_code(KC_A); + unregister_code(KC_LCTL); + } +} + +static void ang_tap_dance_tmux_pane_select (qk_tap_dance_state_t *state, void *user_data) { + uint8_t kc = KC_P; + + if (state->count >= 2) { + kc = KC_Z; + } + + register_code(KC_LALT); + register_code(KC_SPC); + unregister_code(KC_SPC); + unregister_code(KC_LALT); + + register_code(kc); + unregister_code(kc); +} + qk_tap_dance_action_t tap_dance_actions[] = { [CT_CLN] = ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN) ,[CT_TA] = { @@ -813,12 +787,23 @@ qk_tap_dance_action_t tap_dance_actions[] = { } ,[CT_LBP] = ACTION_TAP_DANCE_DOUBLE (KC_LBRC, KC_LPRN) ,[CT_RBP] = ACTION_TAP_DANCE_DOUBLE (KC_RBRC, KC_RPRN) + ,[CT_TMUX]= ACTION_TAP_DANCE_FN (ang_tap_dance_tmux_finished) + ,[CT_TPS] = ACTION_TAP_DANCE_FN (ang_tap_dance_tmux_pane_select) }; // Runs constantly in the background, in a loop. void matrix_scan_user(void) { + static uint32_t prev_layer_state; uint8_t layer = biton32(layer_state); bool is_arrow = false; + static char *layer_lookup[] = {"Dvorak", "ADORE", "Arrows", "AppSel", "Hungarian", "Nav/Media", "Plover"}; + + if (layer_state != prev_layer_state) { + prev_layer_state = layer_state; + if (layer_lookup[layer]) + uprintf("LAYER: %s\n", layer_lookup[layer]); + } + if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) unregister_code (KC_LGUI); @@ -929,18 +914,7 @@ void matrix_scan_user(void) { } SEQ_TWO_KEYS (KC_W, KC_M) { - register_code (KC_LALT); - register_code (KC_F2); - unregister_code (KC_F2); - unregister_code (KC_LALT); - - wait_ms (1000); - - ang_tap (KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0); - register_code (KC_LGUI); - register_code (KC_UP); - unregister_code (KC_UP); - unregister_code (KC_LGUI); + uprintf("CMD:wm\n"); } SEQ_ONE_KEY (KC_A) { @@ -999,8 +973,11 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE bool process_record_user (uint16_t keycode, keyrecord_t *record) { #if KEYLOGGER_ENABLE if (log_enable) { - xprintf ("KL: col=%02d, row=%02d, pressed=%d, layer=%s\n", record->event.key.col, - record->event.key.row, record->event.pressed, (is_adore) ? "ADORE" : "Dvorak"); + uint8_t layer = biton32(layer_state); + + if ((layer == ADORE) || (layer == BASE)) + uprintf ("KL: col=%02d, row=%02d, pressed=%d, layer=%s\n", record->event.key.col, + record->event.key.row, record->event.pressed, (is_adore) ? "ADORE" : "Dvorak"); } #endif @@ -1047,8 +1024,8 @@ void qk_ucis_symbol_fallback (void) { for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { uint8_t code; - if (qk_ucis_state.codes[i] > KF_1) - code = qk_ucis_state.codes[i] - KF_1 + KC_1; + if ((qk_ucis_state.codes[i] >= M(A_1)) && (qk_ucis_state.codes[i] <= M(A_0))) + code = qk_ucis_state.codes[i] - M(A_1) + KC_1; else code = qk_ucis_state.codes[i]; register_code(code); diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 5e7adb332..f15b67652 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -18,12 +18,11 @@ Some of the things in the layout only work when one uses [Spacemacs][spacemacs] * [Layouts](#layouts) - [Base layer](#base-layer) - [ADORE layer](#adore-layer) - - [Hungarian layer](#hungarian-layer) - - [Navigation and media layer](#navigation-and-media-layer) - [Steno layer](#steno-layer) - [LED states](#led-states) * [Tools](#tools) - [Heatmap](#heatmap) + - [Layer notification](#layer-notification) * [Special features](#special-features) - [Unicode Symbol Input](#unicode-symbol-input) * [Building](#building) @@ -39,7 +38,7 @@ Some of the things in the layout only work when one uses [Spacemacs][spacemacs] At its core, this is a Dvorak layout, with some minor changes. The more interesting parts are how certain keys behave: -* The keys on the number row double as function keys, when held for a bit longer than an usual tap. This allows me to use the function keys without having to switch layers. +* The number row is the same as in the [ADORE](#adore-layer) layer. The function keys are on the **Media** layer. * The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap. * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. @@ -57,28 +56,16 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest - `LEAD d` toggles logging keypress positions to the HID console. - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. - `LEAD u` enters the [Unicode symbol input](#unicode-symbol-input) mode. + +The symbols on the front in the image above have the same color as the key that activates them, with the exception of the **Arrow** layer, which is just black on the front. ## ADORE layer [![ADORE layer](images/adore-layer.png)](http://www.keyboard-layout-editor.com/#/gists/45681a17453d235925b6028dd83bf12a) -While using the standard Dvorak layout, I encountered a number of inconveniences, and on this layer, I am playing with ideas to make the layout feel better. Initially, it was based on [Capewell-Dvorak][cpd], but that too, had shortcomings I was not happy with. So now this is something inbetween, with own observations thrown in. How it works out in the long run remains to be seen. +My experimental layout, that I keep tweaking. No full description here, because things are very much in flux. - [cpd]: http://www.michaelcapewell.com/projects/keyboard/layout_capewell-dvorak.htm - -Based on a week and a half of typing, the keys were rearranged, and the home row neatly spelled out **ADORE**, that gave the layout its name. - -## Hungarian layer - -[![Hungarian layer](images/hun-layer.png)](http://www.keyboard-layout-editor.com/#/gists/b160f6ec90d58c127c114c89f66e9dc9) - -On this layer, the accented characters are at the same position as their base variant. For some, which can have other diatribes, the long one is on top, short's on bottom. Tapping any of the accented characters takes us back to the base layer. - -## Navigation and media layer - -[![Navigation and media layer](images/nav-n-media-layer.png)](http://www.keyboard-layout-editor.com/#/gists/c59c453f9fe1a3238ba1494e7e5c6892) - -This layer is primarily for navigating with the cursor or the mouse, and some media things. +Note that the **HUN** layer does not work well with ADORE: it still has the same layout as on the [Base](#base-layer) layer. This will remain until ADORE becomes the default. ## Steno layer @@ -93,8 +80,8 @@ The primary purpose of the LEDs is to show the modifier status, a secondary, to For the layers, the following rules apply: * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. -* When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. -* When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. +* When the **Hungarian** layer is active, the *green* and *blue* LEDs are on. +* When the **Media** layer is active, the *red* and *green* ones are on. * When the **ARROW** layer is active, the *red* and *blue* ones are on. * For the [Steno layer](#steno-layer), all LEDs will be turned on. @@ -129,6 +116,10 @@ The generated heatmap looks somewhat like this: ![Heatmap](images/heatmap.png) +## Layer notification + +There is a very small tool in `tools/layer-notify`, that listens to the HID console, looking for layer change events, and pops up a notification for every detected change. It is a very simple tool, mainly serving as an example. + # Building To make my workflow easier, this layout is maintained in [its own repository][algernon:ez-layout]. To build it, you will need the [QMK][qmk] firmware checked out, and this repo either checked out to something like `keyboards/ergodox_ez/algernon-master`. One way to achieve that is this: @@ -156,6 +147,43 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the # Changelog +## v1.7 + +*2016-09-18* + +### Overall changes + +* The number row has been completely rearranged on both the [Base](#base-layer) and the [ADORE](#adore-layer) layers. +* The number/function key behavior was changed: function keys are now on the **Media**. +* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the [Base](#base-layer) and [ADORE](#adore-layer) layers. +* The bottom large keys on the inner side of each half now function as [tmux](http://tmux.github.io/) keys: the left to send the prefix, the right to send the `display-panes` key. The left also doubles as a GNU screen prefix key, and sends `C-a` when double tapped. +* A number of functions, such as the **AppSel** layer, now require the `hid-commands` tool to be running, with the output of `hid_listen` being piped to it. + +### ADORE + +* `Y` and `X` have been swapped again. + +### Media/Navigation layer + +* The function keys are now on this layer. +* Mouse keys have been removed. +* Media start/stop/prev/next have been removed. +* `Print screen` has been removed. +* There is only one screen lock key now. + +### Heatmap + +* Fixed a few issues in the finger-stats calculation. +* The tool now also timestamps and saves all input lines to a logfile, which it loads on start, allowing one to continue the collection after upgrading the tool. +* The heatmap tool will now colorize the stats by default. +* The periodic stats are now printed in a more compact format. + +### Tools + +* Added a new tool, `tools/layer-notify` that listens to layer change events on the HID console, and pops up a notification on layer changes. +* Another new tool, `tools/text-to-log.py` has been added that converts arbitrary text to a keylogger output, which can be fed to the heatmap generator. +* A number of features have been moved to the `tools/hid-commands` utility. These generally are OS dependent, and are easier to implement on the software side. + ## v1.6 *2016-08-24* @@ -174,7 +202,7 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the ### Miscellaneous changes * `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. -* The mouse acceleration keys on the [Navigation and Media](#navigation-and-media-layer) layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. +* The mouse acceleration keys on the **Navigation/Media** layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. * When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. ### Heatmap @@ -221,7 +249,7 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted. * The `=` and `\` keys were swapped, `=` moved to the home row, on both the [base](#base-layer) and the **experimental** layers. * The arrow and navigation keys were redone, they are now more accessible, but the navigation keys require an extra tap to access. -* The **Emacs** layer is gone, replaced by a simplified [navigation and media](#navigation-and-media-layer) layer. +* The **Emacs** layer is gone, replaced by a simplified **navigation and media** layer. * `LEAD v` types the firmware version, and the keymap version. * On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped. * The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers. @@ -240,7 +268,7 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the - `-` on the left half was replaced by `Tab`. - `Tab`'s original position is taken by a `Media Next`/`Media Prev` key. - `:` now inputs `;` when shifted. -* `ESC` cancels the [Hungarian](#hungarian-layer) layer too, not just modifiers. +* `ESC` cancels the **Hungarian** layer too, not just modifiers. ## v1.0 diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json index 4dfa877a7..502d1e6ea 100644 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json @@ -13,18 +13,15 @@ [ { "x": 3.5, - "c": "#a7d0db", "fa": [ 0, 0, 2 ] }, - "#\n3\nF3", + "*\n5\nF5", { "x": 10.5, - "c": "#a7d0db", - "t": "#000000", "a": 4, "fa": [ 0, @@ -32,54 +29,44 @@ 2 ] }, - "*\n8\nF8" + "#\n4\nF4" ], [ { "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 2.5 }, - "@\n2\nF2", + "@\n7\nF7", { - "x": 1, - "c": "#7adabd", - "t": "#000000" + "x": 1 }, - "$\n4\nF4", + "^\n3\nF3", { "x": 8.5 }, - "&\n7\nF7", + "!\n2\nF2", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, - "(\n9\nF9" + "&\n6\nF6" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, - "%\n5\nF5", + "$\n1\nF1", { - "c": "#f9cd31", "a": 7, - "f": 2 + "f": 3 }, - "STENO", + "F11", { "x": 4.5, "f": 3 }, "F12", { - "c": "#7adabd", "a": 4, "f": 3, "fa": [ @@ -88,19 +75,17 @@ 2 ] }, - "^\n6\nF6" + "%\n0\nF10" ], [ { "y": -0.875, - "c": "#ffb2d2", "f": 9, "a": 6, "w": 1.5 }, "\n\n", { - "t": "#0d0d0b", "f": 3, "a": 4, "fa": [ @@ -109,23 +94,21 @@ 2 ] }, - "!\n1\nF1", + " \n9\nF9", { "x": 14.5 }, - ")\n0\nF10", + " \n8\nF8", { "a": 7, "w": 1.5 }, - "F11" + "STENO" ], [ { "y": -0.375, "x": 3.5, - "c": "#a7d0db", - "t": "#000000", "a": 6 }, "G", @@ -138,15 +121,11 @@ { "y": -0.875, "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", "a": 6 }, "W", { "x": 1, - "c": "#7adabd", - "t": "#000000", "a": 6 }, "L", @@ -155,22 +134,17 @@ }, "H", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, "P" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, "M", { - "c": "#93c9b7", "a": 4, "fa": [0, 0, 0], "h": 1.5 @@ -182,7 +156,6 @@ }, "}\n)\n]", { - "c": "#7adabd", "a": 6 }, "F" @@ -190,24 +163,21 @@ [ { "y": -0.875, - "c": "#ffb07b", - "t": "#0d0d0b", "f": 3, "a": 4, "w": 1.5 }, "\n\n~\n`", { - "c": "#ffb2d2", "a": 6, "f": 3 }, - "Y", + "X", { "x": 14.5, "a": 6 }, - "X", + "Y", { "a": 4, "w": 1.5 @@ -218,8 +188,6 @@ { "y": -0.375, "x": 3.5, - "c": "#a7d0db", - "t": "#000000", "a": 6 }, "E", @@ -231,15 +199,11 @@ [ { "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 2.5 }, "O", { "x": 1, - "c": "#7adabd", - "t": "#000000", "n": true }, "I", @@ -249,18 +213,14 @@ }, "R", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, "N" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, "U", { @@ -271,8 +231,6 @@ [ { "y": -0.875, - "c": "#ffb2d2", - "t": "#0d0d0b", "fa": [ 6 ], @@ -308,22 +266,21 @@ { "y": -0.625, "x": 6.5, - "c": "#93c9b7", - "t": "#000000", + "a": 7, + "f": 9, "h": 1.5 }, - ";\n:", + "", { "x": 4.5, "h": 1.5 }, - "_\n-" + "" ], [ { "y": -0.75, "x": 3.5, - "c": "#a7d0db", "a": 4, "f": 3 }, @@ -339,15 +296,11 @@ { "y": -0.875, "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", "a": 6 }, "Q", { "x": 1, - "c": "#7adabd", - "t": "#000000", "a": 4 }, "<\n,", @@ -357,9 +310,7 @@ }, "K", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, "J" ], @@ -367,8 +318,6 @@ { "y": -0.875, "x": 5.5, - "c": "#7adabd", - "t": "#000000", "a": 4 }, ">\n.", @@ -381,15 +330,12 @@ [ { "y": -0.875, - "c": "#ffb07b", "f": 9, "w": 1.5, "g": true }, "", { - "c": "#ffb2d2", - "t": "#0d0d0b", "a": 6, "f": 3, "g": false @@ -401,8 +347,6 @@ }, "?\n/", { - "c": "#ffb07b", - "t": "#000000", "f": 9, "g": true, "w": 1.5, @@ -414,7 +358,6 @@ { "y": -0.375, "x": 3.5, - "c": "#d9dae0", "g": true, "a": 7, "f": 3 @@ -433,18 +376,16 @@ "", { "x": 1, - "c": "#d4872a", - "g": true, + "g": false, "a": 5 }, - "", + ";\n:", { "x": 8.5 }, - "", + "_\n-", { "x": 1, - "c": "#d9dae0", "g": true, "a": 7 }, @@ -472,7 +413,6 @@ "ry": 4.25, "y": -1, "x": 1, - "c": "#f9cd31", "g": false }, "Alt", @@ -489,7 +429,6 @@ ], [ { - "c": "#d4872a", "a": 7, "f": 9, "h": 2 @@ -500,15 +439,13 @@ }, "", { - "c": "#f9cd31", "f": 3 }, "Ctrl" ], [ { - "x": 2, - "c": "#e26757" + "x": 2 }, "ESC" ], @@ -518,7 +455,6 @@ "rx": 13, "y": -1, "x": -3, - "c": "#f9cd31", "f": 2 }, "MEDIA", @@ -531,7 +467,6 @@ }, "HUN", { - "c": "#d4872a", "f": 9, "h": 2 }, @@ -545,7 +480,6 @@ [ { "x": -3, - "c": "#f9cd31", "f": 2 }, "LEAD" diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json index 1248d36af..5b4ca06c3 100644 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json @@ -13,18 +13,15 @@ [ { "x": 3.5, - "c": "#a7d0db", "fa": [ 0, 0, 2 ] }, - "#\n3\nF3", + "*\n5\nF5", { "x": 10.5, - "c": "#a7d0db", - "t": "#000000", "a": 4, "fa": [ 0, @@ -32,54 +29,44 @@ 2 ] }, - "*\n8\nF8" + "#\n4\nF4" ], [ { "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 2.5 }, - "@\n2\nF2", + "@\n7\nF7", { - "x": 1, - "c": "#7adabd", - "t": "#000000" + "x": 1 }, - "$\n4\nF4", + "^\n3\nF3", { "x": 8.5 }, - "&\n7\nF7", + "!\n2\nF2", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, - "(\n9\nF9" + "&\n6\nF6" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, - "%\n5\nF5", + "$\n1\nF1", { - "c": "#f9cd31", "a": 7, - "f": 2 + "f": 3 }, - "STENO", + "F11", { "x": 4.5, "f": 3 }, "F12", { - "c": "#7adabd", "a": 4, "f": 3, "fa": [ @@ -88,12 +75,11 @@ 2 ] }, - "^\n6\nF6" + "%\n0\nF10" ], [ { "y": -0.875, - "c": "#ffb2d2", "f": 6, "a": 6, "w": 1.5 @@ -101,7 +87,6 @@ "\n\n", { "f": 3, - "t": "#0d0d0b", "a": 4, "fa": [ 0, @@ -110,23 +95,21 @@ ] }, - "!\n1\nF1", + " \n9\nF9", { "x": 14.5 }, - ")\n0\nF10", + " \n8\nF8", { "a": 7, "w": 1.5 }, - "F11" + "STENO" ], [ { "y": -0.375, "x": 3.5, - "c": "#a7d0db", - "t": "#000000", "a": 4 }, ">\n.", @@ -140,15 +123,11 @@ { "y": -0.875, "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", "a": 4 }, "<\n,", { "x": 1, - "c": "#7adabd", - "t": "#000000", "a": 6 }, "P", @@ -157,22 +136,17 @@ }, "G", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, "R" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, "Y", { - "c": "#93c9b7", "a": 4, "h": 1.5 }, @@ -183,7 +157,6 @@ }, "}\n)\n]", { - "c": "#7adabd", "a": 6 }, "F" @@ -191,14 +164,12 @@ [ { "y": -0.875, - "c": "#ffb07b", - "t": "#0d0d0b", "f": 3, + "a": 4, "w": 1.5 }, "\n\n~\n`", { - "c": "#ffb2d2", "a": 4, "f": 3 }, @@ -218,8 +189,6 @@ { "y": -0.375, "x": 3.5, - "c": "#a7d0db", - "t": "#000000", "a": 6 }, "E", @@ -231,15 +200,11 @@ [ { "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 2.5 }, "O", { "x": 1, - "c": "#7adabd", - "t": "#000000", "n": true }, "U", @@ -249,18 +214,14 @@ }, "H", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, "N" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, "I", { @@ -271,8 +232,6 @@ [ { "y": -0.875, - "c": "#ffb2d2", - "t": "#0d0d0b", "fa": [ 6 ], @@ -308,23 +267,22 @@ { "y": -0.625, "x": 6.5, - "c": "#93c9b7", - "t": "#000000", "a": 7, + "f": 9, "h": 1.5 }, - "(", + "", { "x": 4.5, "h": 1.5 }, - ")" + "" ], [ { "y": -0.75, "x": 3.5, - "c": "#a7d0db", + "f": 3, "a": 6 }, "J", @@ -336,15 +294,11 @@ [ { "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 2.5 }, "Q", { - "x": 1, - "c": "#7adabd", - "t": "#000000" + "x": 1 }, "K", { @@ -352,18 +306,14 @@ }, "M", { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" + "x": 1 }, "V" ], [ { "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" + "x": 5.5 }, "X", { @@ -374,14 +324,11 @@ [ { "y": -0.875, - "c": "#ffb07b", "f": 9, "w": 1.5 }, "\n\n", { - "c": "#ffb2d2", - "t": "#0d0d0b", "a": 4, "f": 3 }, @@ -392,8 +339,6 @@ }, "Z", { - "c": "#ffb07b", - "t": "#000000", "f": 9, "w": 1.5 }, @@ -403,7 +348,6 @@ { "y": -0.375, "x": 3.5, - "c": "#d9dae0", "g": true, "a": 7, "f": 3 @@ -422,7 +366,6 @@ "", { "x": 1, - "c": "#d4872a", "g": false, "a": 5 }, @@ -433,7 +376,6 @@ "_\n-", { "x": 1, - "c": "#d9dae0", "g": true, "a": 7 }, @@ -461,7 +403,6 @@ "ry": 4.25, "y": -1, "x": 1, - "c": "#f9cd31", "g": false }, "Alt", @@ -478,7 +419,6 @@ ], [ { - "c": "#d4872a", "a": 7, "f": 9, "h": 2 @@ -489,15 +429,13 @@ }, "", { - "c": "#f9cd31", "f": 3 }, "Ctrl" ], [ { - "x": 2, - "c": "#e26757" + "x": 2 }, "ESC" ], @@ -507,7 +445,6 @@ "rx": 13, "y": -1, "x": -3, - "c": "#f9cd31", "f": 2 }, "MEDIA", @@ -520,7 +457,6 @@ }, "LEAD", { - "c": "#d4872a", "f": 9, "h": 2 }, @@ -534,7 +470,6 @@ [ { "x": -3, - "c": "#f9cd31", "f": 2 }, "HUN" diff --git a/keyboards/ergodox/keymaps/algernon/tools/hid-commands b/keyboards/ergodox/keymaps/algernon/tools/hid-commands new file mode 100755 index 000000000..f3b83cf6d --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/hid-commands @@ -0,0 +1,61 @@ +#!/bin/bash +set -e + +cmd_wm () { + WIN="$(xdotool getactivewindow)" + wmctrl -i -r ${WIN} -b remove,maximized_vert,maximized_horz + xdotool windowsize ${WIN} 100% 100% + wmctrl -i -r ${WIN} -b add,maximized_vert,maximized_horz +} + +_cmd_appsel () { + wmctrl -x -a $1 || true + xdotool key Escape +} + +cmd_appsel_music () { + wmctrl -x -a rhythmbox || wmctrl -x -a spotify || true + xdotool key Escape +} + +cmd_appsel_slack () { + _cmd_appsel slack +} + +cmd_appsel_emacs () { + _cmd_appsel emacs24 +} + +cmd_appsel_term () { + _cmd_appsel gnome-terminal +} + +cmd_appsel_chrome () { + _cmd_appsel chromium +} + +cmd_help () { + cat </dev/null 2>&1; then + cmd_${cmd} + fi +done + + diff --git a/keyboards/ergodox/keymaps/algernon/tools/layer-notify b/keyboards/ergodox/keymaps/algernon/tools/layer-notify new file mode 100755 index 000000000..627c2861e --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/layer-notify @@ -0,0 +1,12 @@ +#!/bin/sh +HL="${HID_LISTEN:-$HOME/src/ext/hid_listen/hid_listen}" + +sudo "${HL}" | grep --line-buffered LAYER: | \ +(while read line; do + case $line in + LAYER:*) + layer="$(echo $(echo $line | cut -d: -f2-))" + notify-send -i mark-location-symbolic "Switched to layer: $layer" + ;; + esac + done) diff --git a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py index 68585843b..09c737646 100755 --- a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py +++ b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py @@ -1,12 +1,15 @@ -#! /usr/bin/env python +#! /usr/bin/env python3 import json import os import sys import re import argparse +import time from math import floor from os.path import dirname +from subprocess import Popen, PIPE, STDOUT +from blessings import Terminal class Heatmap(object): coords = [ @@ -33,7 +36,7 @@ class Heatmap(object): [ # Row 4 [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], - [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], + [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], [], [], [], [] ], [ # Row 5 @@ -56,11 +59,13 @@ class Heatmap(object): def set_attr(orig, new): return new - def set_bg(self, (block, n), color): + def set_bg(self, coords, color): + (block, n) = coords self.set_attr_at(block, n, "c", self.set_attr, color) #self.set_attr_at(block, n, "g", self.set_attr, False) - def set_tap_info(self, (block, n), count, cap): + def set_tap_info(self, coords, count, cap): + (block, n) = coords def _set_tap_info(o, _count, _cap): ns = 4 - o.count ("\n") return o + "\n" * ns + "%.02f%%" % (float(_count) / float(_cap) * 100) @@ -87,8 +92,8 @@ class Heatmap(object): g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] - r, g, b = [x * 255 for x in r, g, b] - return "#%02x%02x%02x" % (r, g, b) + r, g, b = [x * 255 for x in (r, g, b)] + return "#%02x%02x%02x" % (int(r), int(g), int(b)) def __init__(self, layout): self.log = {} @@ -96,7 +101,8 @@ class Heatmap(object): self.max_cnt = 0 self.layout = layout - def update_log(self, (c, r)): + def update_log(self, coords): + (c, r) = coords if not (c, r) in self.log: self.log[(c, r)] = 0 self.log[(c, r)] = self.log[(c, r)] + 1 @@ -132,18 +138,17 @@ class Heatmap(object): # right hand [0, 0, 0, 0, 0] ] - finger_map = [0, 0, 1, 2, 3, 4, 4] + finger_map = [0, 0, 1, 2, 3, 3, 3, 1, 1, 1, 2, 3, 4, 4] for (c, r) in self.log: if r == 5: # thumb cluster if c <= 6: # left side usage[0][4] = usage[0][4] + self.log[(c, r)] else: - usage[1][4] = usage[1][4] + self.log[(c, r)] + usage[1][0] = usage[1][0] + self.log[(c, r)] else: fc = c hand = 0 if fc >= 7: - fc = fc - 7 hand = 1 fm = finger_map[fc] usage[hand][fm] = usage[hand][fm] + self.log[(c, r)] @@ -157,79 +162,158 @@ class Heatmap(object): if total == 0: total = 1 stats = { + "total-keys": total, "hands": { "left": { - "usage": float(hand_usage[0]) / total * 100, + "usage": round(float(hand_usage[0]) / total * 100, 2), "fingers": { - "0 - pinky": 0, - "1 - ring": 0, - "2 - middle": 0, - "3 - index": 0, - "4 - thumb": 0, + "pinky": 0, + "ring": 0, + "middle": 0, + "index": 0, + "thumb": 0, } }, "right": { - "usage": float(hand_usage[1]) / total * 100, + "usage": round(float(hand_usage[1]) / total * 100, 2), "fingers": { - "0 - thumb": 0, - "1 - index": 0, - "2 - middle": 0, - "3 - ring": 0, - "4 - pinky": 0, + "thumb": 0, + "index": 0, + "middle": 0, + "ring": 0, + "pinky": 0, } }, } } hmap = ['left', 'right'] - fmap = ['0 - pinky', '1 - ring', '2 - middle', '3 - index', '4 - thumb', - '0 - thumb', '1 - index', '2 - middle', '3 - ring', '4 - pinky'] + fmap = ['pinky', 'ring', 'middle', 'index', 'thumb', + 'thumb', 'index', 'middle', 'ring', 'pinky'] for hand_idx in range(len(usage)): hand = usage[hand_idx] for finger_idx in range(len(hand)): - stats['hands'][hmap[hand_idx]]['fingers'][fmap[finger_idx + hand_idx * 5]] = float(hand[finger_idx]) / total * 100 + stats['hands'][hmap[hand_idx]]['fingers'][fmap[finger_idx + hand_idx * 5]] = round(float(hand[finger_idx]) / total * 100, 2) return stats def dump_all(out_dir, heatmaps): - for layer in heatmaps.keys(): + stats = {} + t = Terminal() + t.clear() + sys.stdout.write("\x1b[2J\x1b[H") + + print ('{t.underline}{outdir}{t.normal}\n'.format(t=t, outdir=out_dir)) + + keys = list(heatmaps.keys()) + keys.sort() + + for layer in keys: if len(heatmaps[layer].log) == 0: continue with open ("%s/%s.json" % (out_dir, layer), "w") as f: json.dump(heatmaps[layer].get_heatmap(), f) - print >>sys.stderr, "%s stats:" % (layer) - json.dump (heatmaps[layer].get_stats(), sys.stderr, - indent = 4, sort_keys = True) - print >>sys.stderr, "" - print >>sys.stderr, "" + stats[layer] = heatmaps[layer].get_stats() -def main(opts): + left = stats[layer]['hands']['left'] + right = stats[layer]['hands']['right'] + + print ('{t.bold}{layer}{t.normal} ({total:,} taps):'.format(t=t, layer=layer, + total=int(stats[layer]['total-keys'] / 2))) + print (('{t.underline} | ' + \ + 'left ({l[usage]:6.2f}%) | ' + \ + 'right ({r[usage]:6.2f}%) |{t.normal}').format(t=t, l=left, r=right)) + print ((' {t.bright_magenta}pinky{t.white} | {left[pinky]:6.2f}% | {right[pinky]:6.2f}% |\n' + \ + ' {t.bright_cyan}ring{t.white} | {left[ring]:6.2f}% | {right[ring]:6.2f}% |\n' + \ + ' {t.bright_blue}middle{t.white} | {left[middle]:6.2f}% | {right[middle]:6.2f}% |\n' + \ + ' {t.bright_green}index{t.white} | {left[index]:6.2f}% | {right[index]:6.2f}% |\n' + \ + ' {t.bright_red}thumb{t.white} | {left[thumb]:6.2f}% | {right[thumb]:6.2f}% |\n' + \ + '').format(left=left['fingers'], right=right['fingers'], t=t)) + +def process_line(line, heatmaps, opts, stamped_log = None): + m = re.search ('KL: col=(\d+), row=(\d+), pressed=(\d+), layer=(.*)', line) + if not m: + return False + if stamped_log is not None: + if line.startswith("KL:"): + print ("%10.10f %s" % (time.time(), line), + file = stamped_log, end = '') + else: + print (line, + file = stamped_log, end = '') + stamped_log.flush() + + (c, r, l) = (int(m.group (2)), int(m.group (1)), m.group (4)) + if (c, r) not in opts.allowed_keys: + return False + + heatmaps[l].update_log ((c, r)) + + return True + +def setup_allowed_keys(opts): + if len(opts.only_key): + incmap={} + for v in opts.only_key: + m = re.search ('(\d+),(\d+)', v) + if not m: + continue + (c, r) = (int(m.group(1)), int(m.group(2))) + incmap[(c, r)] = True + else: + incmap={} + for r in range(0, 6): + for c in range(0, 14): + incmap[(c, r)] = True + for v in opts.ignore_key: + m = re.search ('(\d+),(\d+)', v) + if not m: + continue + (c, r) = (int(m.group(1)), int(m.group(2))) + del(incmap[(c, r)]) + + return incmap + +def main(opts): heatmaps = {"Dvorak": Heatmap("Dvorak"), "ADORE": Heatmap("ADORE") } cnt = 0 - restrict_row = opts.restrict_row out_dir = opts.outdir + if not os.path.exists(out_dir): + os.makedirs(out_dir) + + opts.allowed_keys = setup_allowed_keys(opts) + + if not opts.one_shot: + + try: + with open("%s/stamped-log" % out_dir, "r") as f: + while True: + line = f.readline() + if not line: + break + if not process_line(line, heatmaps, opts): + continue + except: + pass + + stamped_log = open ("%s/stamped-log" % (out_dir), "a+") + else: + stamped_log = None + while True: line = sys.stdin.readline() if not line: break - m = re.search ('KL: col=(\d+), row=(\d+), pressed=(\d+), layer=(.*)', line) - if not m: + if not process_line(line, heatmaps, opts, stamped_log): continue cnt = cnt + 1 - (c, r, l) = (int(m.group (2)), int(m.group (1)), m.group (4)) - if restrict_row != -1 and r != restrict_row: - continue - if c in opts.ignore_columns: - continue - - heatmaps[l].update_log ((c, r)) - if opts.dump_interval != -1 and cnt >= opts.dump_interval: + if opts.dump_interval != -1 and cnt >= opts.dump_interval and not opts.one_shot: cnt = 0 dump_all(out_dir, heatmaps) @@ -239,11 +323,17 @@ if __name__ == "__main__": parser = argparse.ArgumentParser (description = "keylog to heatmap processor") parser.add_argument ('outdir', action = 'store', help = 'Output directory') - parser.add_argument ('--row', dest = 'restrict_row', action = 'store', type = int, - default = -1, help = 'Restrict processing to this row only') parser.add_argument ('--dump-interval', dest = 'dump_interval', action = 'store', type = int, default = 100, help = 'Dump stats and heatmap at every Nth event, -1 for dumping at EOF only') - parser.add_argument ('--ignore-column', dest = 'ignore_columns', action = 'append', type = int, - default = [], help = 'Ignore the specified columns') + parser.add_argument ('--ignore-key', dest = 'ignore_key', action = 'append', type = str, + default = [], help = 'Ignore the key at position (x, y)') + parser.add_argument ('--only-key', dest = 'only_key', action = 'append', type = str, + default = [], help = 'Only include key at position (x, y)') + parser.add_argument ('--one-shot', dest = 'one_shot', action = 'store_true', + help = 'Do not load previous data, and do not update it, either.') args = parser.parse_args() + if len(args.ignore_key) and len(args.only_key): + print ("--ignore-key and --only-key are mutually exclusive, please only use one of them!", + file = sys.stderr) + sys.exit(1) main(args) diff --git a/keyboards/ergodox/keymaps/algernon/tools/max-focused b/keyboards/ergodox/keymaps/algernon/tools/max-focused deleted file mode 100755 index 4d5220aa8..000000000 --- a/keyboards/ergodox/keymaps/algernon/tools/max-focused +++ /dev/null @@ -1,5 +0,0 @@ -#! /bin/sh -WIN="$(xdotool getactivewindow)" -wmctrl -i -r ${WIN} -b remove,maximized_vert,maximized_horz -xdotool windowsize ${WIN} 100% 100% -wmctrl -i -r ${WIN} -b add,maximized_vert,maximized_horz diff --git a/keyboards/ergodox/keymaps/algernon/tools/text-to-log.py b/keyboards/ergodox/keymaps/algernon/tools/text-to-log.py new file mode 100755 index 000000000..e068c3cbf --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/text-to-log.py @@ -0,0 +1,107 @@ +#!/usr/bin/env python3 + +import os +import sys + +charmap = { + '9': [[1, 0]], + '7': [[2, 0]], '@': [[2, 5], [2, 0]], + '5': [[3, 0]], '*': [[2, 5], [3, 0]], + '3': [[4, 0]], '^': [[2, 5], [4, 0]], + '1': [[5, 0]], '$': [[2, 5], [5, 0]], + '0': [[8, 0]], '%': [[2, 5], [8, 0]], + '2': [[9, 0]], '!': [[2, 5], [9, 0]], + '4': [[10, 0]], '#': [[2, 5], [10, 0]], + '6': [[11, 0]], '&': [[2, 5], [11, 0]], + '8': [[12, 0]], + + '`': [[0, 1]], '~': [[2, 5], [0, 1]], + 'y': [[1, 1]], 'Y': [[2, 5], [1, 1]], + 'w': [[2, 1]], 'W': [[2, 5], [2, 1]], + 'g': [[3, 1]], 'G': [[2, 5], [3, 1]], + 'l': [[4, 1]], 'L': [[2, 5], [4, 1]], + 'm': [[5, 1]], 'M': [[2, 5], [5, 1]], + '[': [[6, 1]], '{': [[2, 5], [6, 1]], '(': [[6, 1], [6, 1]], + ']': [[7, 1]], '}': [[2, 5], [7, 1]], ')': [[7, 1], [7, 1]], + 'f': [[8, 1]], 'F': [[2, 5], [8, 1]], + 'h': [[9, 1]], 'H': [[2, 5], [9, 1]], + 'c': [[10, 1]], 'C': [[2, 5], [10, 1]], + 'p': [[11, 1]], 'P': [[2, 5], [11, 1]], + 'x': [[12, 1]], 'X': [[2, 5], [12, 1]], + '\\': [[13, 1]], '|': [[2, 5], [13, 1]], + + '\t': [[0, 2]], + 'a': [[1, 2]], 'A': [[2, 5], [1, 2]], + 'o': [[2, 2]], 'O': [[2, 5], [2, 2]], + 'e': [[3, 2]], 'E': [[2, 5], [3, 2]], + 'i': [[4, 2]], 'I': [[2, 5], [4, 2]], + 'u': [[5, 2]], 'U': [[2, 5], [5, 2]], + 'd': [[8, 2]], 'D': [[2, 5], [8, 2]], + 'r': [[9, 2]], 'R': [[2, 5], [9, 2]], + 't': [[10, 2]], 'T': [[2, 5], [10, 2]], + 'n': [[11, 2]], 'N': [[2, 5], [11, 2]], + 's': [[12, 2]], 'S': [[2, 5], [12, 2]], + '=': [[13, 2]], '+': [[2, 5], [13, 2]], + + 'z': [[1, 3]], 'Z': [[2, 5], [1, 3]], + 'q': [[2, 3]], 'Q': [[2, 5], [2, 3]], + '\'': [[3, 3]], '"': [[2, 5], [3, 3]], + ',': [[4, 3]], '<': [[2, 5], [4, 3]], + '.': [[5, 3]], '>': [[2, 5], [5, 3]], + 'b': [[8, 3]], 'B': [[2, 5], [8, 3]], + 'k': [[9, 3]], 'K': [[2, 5], [9, 3]], + 'v': [[10, 3]], 'V': [[2, 5], [10, 3]], + 'j': [[11, 3]], 'J': [[2, 5], [11, 3]], + '/': [[12, 3]], '?': [[2, 5], [12, 3]], + + ':': [[4, 4]], ';': [[4, 4], [4, 4]], + '-': [[9, 4]], '_': [[2, 5], [9, 4]], + + ' ': [[10, 5]], + '\n': [[11, 5]], + + ## Layered things + # Hungarian + 'á': [[9, 5], [1, 2]], 'Á': [[2, 5], [9, 5], [1, 2]], + 'ó': [[9, 5], [2, 2]], 'Ó': [[2, 5], [9, 5], [2, 2]], + 'ő': [[9, 5], [2, 1]], 'Ő': [[2, 5], [9, 5], [2, 1]], + 'ö': [[9, 5], [2, 3]], 'Ö': [[2, 5], [9, 5], [2, 3]], + 'é': [[9, 5], [3, 2]], 'É': [[2, 5], [9, 5], [3, 2]], + 'ú': [[9, 5], [4, 2]], 'Ú': [[2, 5], [9, 5], [4, 2]], + 'ű': [[9, 5], [4, 1]], 'Ű': [[2, 5], [9, 5], [4, 1]], + 'ü': [[9, 5], [4, 3]], 'Ü': [[2, 5], [9, 5], [4, 3]], + 'í': [[9, 5], [5, 2]], 'Í': [[2, 5], [9, 5], [5, 2]], +} + +def lookup_char(layer, ch): + if ch in charmap: + return charmap[ch] + return None + +def process_char(layer, ch, out=sys.stdout): + keys = lookup_char(layer, ch) + if not keys: + print ("Unknown char: %s" % ch, file=sys.stderr) + else: + for (c, r) in keys: + print ("KL: col=%d, row=%d, pressed=1, layer=%s" % (r, c, layer), file=out) + print ("KL: col=%d, row=%d, pressed=0, layer=%s" % (r, c, layer), file=out) + +def process_file(fn, layer, out=sys.stdout): + with open(fn, "r") as f: + ch = f.read(1) + while ch: + process_char(layer, ch, out) + ch = f.read(1) + +if sys.argv[1] == '-': + out='/dev/stdin' +else: + out=sys.argv[1] + +if len(sys.argv) >= 2: + layer = 'ADORE' +else: + layer = sys.argv[2] + +process_file(out, layer = layer) -- cgit v1.2.3 From 6e5142ca3ee7c45a0776d84ba667c5504dc85cd8 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Thu, 22 Sep 2016 22:05:12 -0400 Subject: Adds EPRM reset key --- keyboards/ergodox/keymaps/default/keymap.c | 12 ++++++++++-- keyboards/ergodox/keymaps/default/readme.md | 2 ++ 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/default/keymap.c b/keyboards/ergodox/keymaps/default/keymap.c index 1b80cb3a2..2f399bd18 100644 --- a/keyboards/ergodox/keymaps/default/keymap.c +++ b/keyboards/ergodox/keymaps/default/keymap.c @@ -7,6 +7,8 @@ #define SYMB 1 // symbols #define MDIA 2 // media keys +#define EPRM M(1) // Macro 1: Reset EEPROM + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * @@ -62,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | + * | EPRM | | | | | | | . | 0 | = | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | | | | | | @@ -79,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, @@ -149,6 +151,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); } break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; } return MACRO_NONE; }; @@ -158,6 +165,7 @@ void matrix_init_user(void) { }; + // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/keyboards/ergodox/keymaps/default/readme.md b/keyboards/ergodox/keymaps/default/readme.md index 8f6dba45e..f68138ed6 100644 --- a/keyboards/ergodox/keymaps/default/readme.md +++ b/keyboards/ergodox/keymaps/default/readme.md @@ -2,6 +2,8 @@ ## Changelog +* Sep 22, 2016: + * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM. * Feb 2, 2016 (V1.1): * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). -- cgit v1.2.3 From 1a96b2cdc8895bd9f219e6c793aeee6ff7ce81f6 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Fri, 23 Sep 2016 20:57:36 -0400 Subject: Disables sleep LED by default --- keyboards/ergodox/ez/rules.mk | 2 ++ 1 file changed, 2 insertions(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index 37e554b30..a9715beb8 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -71,6 +71,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # comment out to disable the options. # +SLEEP_LED_ENABLE = no + ifndef QUANTUM_DIR include ../../../Makefile endif -- cgit v1.2.3 From 04c0a1c3e2d9f81cd44dc7548f6135ca175edbe1 Mon Sep 17 00:00:00 2001 From: chwilk Date: Mon, 26 Sep 2016 01:04:33 -0500 Subject: Added ONEHAND_ENABLE to allow SWAP HANDS actions --- keyboards/ergodox/rules.mk | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk index ac63d4eff..add64ec76 100644 --- a/keyboards/ergodox/rules.mk +++ b/keyboards/ergodox/rules.mk @@ -26,3 +26,4 @@ SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= yes # Unicode +ONEHAND_ENABLE ?= yes # Allow swapping hands of keyboard -- cgit v1.2.3 From 90fd0810dbd551b32e4be46f108b4974890299b9 Mon Sep 17 00:00:00 2001 From: chwilk Date: Mon, 26 Sep 2016 01:05:06 -0500 Subject: Updated kastyle keymap, including swap hands feature --- keyboards/ergodox/keymaps/kastyle/keymap.c | 98 +++++++++++++++++++----------- 1 file changed, 62 insertions(+), 36 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/kastyle/keymap.c b/keyboards/ergodox/keymaps/kastyle/keymap.c index a92085003..4e3794a96 100644 --- a/keyboards/ergodox/keymaps/kastyle/keymap.c +++ b/keyboards/ergodox/keymaps/kastyle/keymap.c @@ -1,3 +1,6 @@ +/* Setup to approximate a Kinesis Advantage with an eye to use in a + * Mac/OSX environment + * This version adds a hand swap feature to flip the keyboard */ #include "ergodox.h" #include "debug.h" #include "action_layer.h" @@ -18,10 +21,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * |Grv/L1| \ |AltShf| Left | Right| | Up | Down | [ | ] |Grv/L1| * `----------------------------------' `----------------------------------' * ,---------------. ,---------------. - * |Ctrl/Esc| Alt | | Alt |Ctrl/Esc| + * | LGUI |Al/Esc| |Al/Esc| RGUI | * ,------|--------|------| |------+--------+------. * | | | Home | | PgUp | | | * |Backsp| Del |------| |------| Enter | Space| @@ -31,33 +34,34 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // If it accepts an argument (i.e, is a function), it doesn't need KC_. // Otherwise, it needs KC_* [BASE] = KEYMAP( // layer 0 : default - // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LGUI, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - CTL_T(KC_ESC), ALT_T(KC_APP), - KC_HOME, - KC_BSPC,KC_DEL,KC_END, - // right hand - KC_APP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOT, - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP, - KC_PGDN,KC_ENT, KC_SPC - ), + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LGUI, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_FN1, KC_BSLS, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + KC_LGUI, ALT_T(KC_ESC), + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_APP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), KC_QUOT, + MEH_T(KC_NO), KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_FN1, + ALT_T(KC_ESC), KC_RGUI, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC +), + /* Keymap 1: Symbol Layer * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * | PrScr | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * | ScrLk | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * | Pause | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' @@ -74,14 +78,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // SYMBOLS [SYMB] = KEYMAP( // left hand - KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_SLCK, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, + KC_PAUS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, + KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, // right hand KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, @@ -92,6 +96,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + /* Keymap 2: Media and mouse keys * * ,--------------------------------------------------. ,--------------------------------------------------. @@ -135,10 +140,6 @@ KEYMAP( ), }; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { // MACRODOWN only works in this function @@ -154,6 +155,31 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; }; +// swap-hands action needs a matrix to define the swap +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + /* Left hand, matrix positions */ + {{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}}, + {{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}}, + {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}}, + {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}}, + {{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}}, + {{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}}, + {{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}}, + /* Right hand, matrix positions */ + {{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}}, + {{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}}, + {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}}, + {{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}}, + {{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}}, + {{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}}, + {{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}}, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_SWAP_HANDS_TAP_KEY(KC_GRV) // FN1 - Tap = Grave/Tilde - Hold Momentary swap hands +}; + + // Runs just one time when the keyboard initializes. void matrix_init_user(void) { -- cgit v1.2.3 From e1bfe13090debb25db8e44048cd0055e3680513c Mon Sep 17 00:00:00 2001 From: chwilk Date: Mon, 26 Sep 2016 15:49:10 -0500 Subject: Moved hand_swap_config array so all keyboards get it defined --- keyboards/ergodox/ergodox.c | 24 ++++++++++++++++++++++++ keyboards/ergodox/keymaps/kastyle/keymap.c | 21 --------------------- 2 files changed, 24 insertions(+), 21 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ergodox.c b/keyboards/ergodox/ergodox.c index e69de29bb..c88c1ad89 100644 --- a/keyboards/ergodox/ergodox.c +++ b/keyboards/ergodox/ergodox.c @@ -0,0 +1,24 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +// swap-hands action needs a matrix to define the swap +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + /* Left hand, matrix positions */ + {{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}}, + {{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}}, + {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}}, + {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}}, + {{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}}, + {{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}}, + {{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}}, + /* Right hand, matrix positions */ + {{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}}, + {{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}}, + {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}}, + {{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}}, + {{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}}, + {{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}}, + {{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}}, +}; + diff --git a/keyboards/ergodox/keymaps/kastyle/keymap.c b/keyboards/ergodox/keymaps/kastyle/keymap.c index 4e3794a96..467996686 100644 --- a/keyboards/ergodox/keymaps/kastyle/keymap.c +++ b/keyboards/ergodox/keymaps/kastyle/keymap.c @@ -155,31 +155,10 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; }; -// swap-hands action needs a matrix to define the swap -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - /* Left hand, matrix positions */ - {{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}}, - {{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}}, - {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}}, - {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}}, - {{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}}, - {{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}}, - {{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}}, - /* Right hand, matrix positions */ - {{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}}, - {{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}}, - {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}}, - {{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}}, - {{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}}, - {{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}}, - {{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}}, -}; - const uint16_t PROGMEM fn_actions[] = { [1] = ACTION_SWAP_HANDS_TAP_KEY(KC_GRV) // FN1 - Tap = Grave/Tilde - Hold Momentary swap hands }; - // Runs just one time when the keyboard initializes. void matrix_init_user(void) { -- cgit v1.2.3 From 32cc2f6bd90233401a3590b3f975304dac6e4805 Mon Sep 17 00:00:00 2001 From: chwilk Date: Tue, 27 Sep 2016 11:27:09 -0500 Subject: Added description of kastyle keymap --- keyboards/ergodox/keymaps/kastyle/readme.md | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 keyboards/ergodox/keymaps/kastyle/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/kastyle/readme.md b/keyboards/ergodox/keymaps/kastyle/readme.md new file mode 100644 index 000000000..944286a81 --- /dev/null +++ b/keyboards/ergodox/keymaps/kastyle/readme.md @@ -0,0 +1,14 @@ +The kastyle keymap was originally intended to remap the ErgoDox EZ to more +closely approximate the layout of a Kinesis Advantage. Notable changes +over the stock ErgoDox layout include: + + * Re-arragnement of tab, enter, space, and delete to match the Kinesis + * Addition of print screen, pause, etc. keys following the kines-ish keymap + on L1 + * GUI keys have replaced Ctrl on the thumb keys (for Mac use), and Alt keys + are mapped to allow Esc on tap (good for Vi users) + * Most notably, the addition of a momentary one-handed mode for quick and + easy access to keys on the other half of the keyboard, e.g. while using a + mouse in one hand, one may add text to a dialogue box with the other without + having to reach across the keyboard or remove one's hand from the mouse. + -- cgit v1.2.3 From 65b0eff6d863d458464c35a8571071ad4a519af5 Mon Sep 17 00:00:00 2001 From: Chris McLennon Date: Wed, 28 Sep 2016 13:24:29 -0500 Subject: Contributing new keymap to Ergodox --- keyboards/ergodox/keymaps/mclennon_osx/README.md | 5 + keyboards/ergodox/keymaps/mclennon_osx/config.h | 93 +++++++++++++++ keyboards/ergodox/keymaps/mclennon_osx/keymap.c | 144 +++++++++++++++++++++++ 3 files changed, 242 insertions(+) create mode 100644 keyboards/ergodox/keymaps/mclennon_osx/README.md create mode 100644 keyboards/ergodox/keymaps/mclennon_osx/config.h create mode 100644 keyboards/ergodox/keymaps/mclennon_osx/keymap.c (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/mclennon_osx/README.md b/keyboards/ergodox/keymaps/mclennon_osx/README.md new file mode 100644 index 000000000..60980d043 --- /dev/null +++ b/keyboards/ergodox/keymaps/mclennon_osx/README.md @@ -0,0 +1,5 @@ +# Ergodox EZ for OS X + +This keymapping is designed to be reasonably familiar to an ordinary Mac keyboard while taking advantage of the Ergodox EZ's features. Caps lock instead enables a layer which allows a user to use HJKL as arrow keys and to control media. Shift and control have additional mappings on S and D to provide easier access while holding down caps lock. + +If you choose to compile this yourself, be sure to compile with `#define PREVENT_STUCK_MODIFIERS` in your `config.h`. Firmware built using [qmk_firmware](https://github.com/jackhumbert/qmk_firmware/). diff --git a/keyboards/ergodox/keymaps/mclennon_osx/config.h b/keyboards/ergodox/keymaps/mclennon_osx/config.h new file mode 100644 index 000000000..99cbaf000 --- /dev/null +++ b/keyboards/ergodox/keymaps/mclennon_osx/config.h @@ -0,0 +1,93 @@ +/* +Copyright 2012 Jun Wako +Copyright 2013 Oleg Kostyuk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1307 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ErgoDox EZ +#define PRODUCT ErgoDox EZ +#define DESCRIPTION t.m.k. keyboard firmware for Ergodox + +/* key matrix size */ +#define MATRIX_ROWS 14 +#define MATRIX_COLS 6 + +#define MOUSEKEY_DELAY 100 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 3 +#define MOUSEKEY_TIME_TO_MAX 10 + +#define TAPPING_TOGGLE 1 + +#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define ROWS (int []){ D0, D5, B5, B6 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 2 +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ + keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +//#define DEBUG_MATRIX_SCAN_RATE + +// CUSTOM +#define PREVENT_STUCK_MODIFIERS + +#endif diff --git a/keyboards/ergodox/keymaps/mclennon_osx/keymap.c b/keyboards/ergodox/keymaps/mclennon_osx/keymap.c new file mode 100644 index 000000000..627ff01e4 --- /dev/null +++ b/keyboards/ergodox/keymaps/mclennon_osx/keymap.c @@ -0,0 +1,144 @@ +// Media keys work on OSX, but not on Windows. +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // Default layer +#define AUXI 1 // Auxiliary layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ~` | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 0 | -_ | += | Bkspc | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | Del | Y | U | I | O | P | |\ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | L1 | A | S | D | F | G |------| |------| H | J | K | L | ;: | Enter | + * |--------+------+------+------+------+------| {[ | | }] |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | <, | >. | ?/ | "' | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | | | | Esc | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | |Power | | + * ,------|------|------| |------+--------+------. + * | | | | | | | | + * | LGui | LAlt |------| |------| Bkspc |Space | + * | | | | | Del | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(1), + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_LCTL, KC_TRNS,KC_TRNS,KC_TRNS,KC_ESC, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_LGUI,KC_LALT,KC_TRNS, + + // right hand + KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, + KC_DELETE, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLASH, + KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT, + KC_RBRC, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_QUOT, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_PWR, KC_TRNS, + KC_TRNS, + KC_DELETE, KC_BSPC, KC_SPC + ), +/* Keymap 1: Auxiliary Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | TRNS | | | Mute | VolDn| VolUp| Play | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | TRNS | |LShift| LCtrl| | |------| |------| LEFT | DOWN | UP |RIGHT | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LShift | | | | | | | | | MPrv | MNxt | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | LGui | LAlt |------| |------| Bkspc| Space| + * | | | | | Del | | | + * `--------------------' `--------------------' + */ +// AUXILIARY +[AUXI] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LSHIFT,KC_LCTL, KC_TRNS, KC_TRNS, + KC_LSHIFT,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_LGUI, KC_LALT, KC_TRNS, + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_TRNS, KC_TRNS, + KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_PWR, KC_TRNS, + KC_TRNS, + KC_DELETE, KC_BSPC, KC_SPC +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(AUXI) // FN1 - Momentary Layer 1 (Auxiliary) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; -- cgit v1.2.3 From cce294df86be7c430f8764ae3330991e66138f43 Mon Sep 17 00:00:00 2001 From: Chris McLennon Date: Wed, 28 Sep 2016 14:44:41 -0500 Subject: Remove config.h --- keyboards/ergodox/keymaps/mclennon_osx/config.h | 93 ------------------------- 1 file changed, 93 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/mclennon_osx/config.h (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/mclennon_osx/config.h b/keyboards/ergodox/keymaps/mclennon_osx/config.h deleted file mode 100644 index 99cbaf000..000000000 --- a/keyboards/ergodox/keymaps/mclennon_osx/config.h +++ /dev/null @@ -1,93 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2013 Oleg Kostyuk - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1307 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ErgoDox EZ -#define PRODUCT ErgoDox EZ -#define DESCRIPTION t.m.k. keyboard firmware for Ergodox - -/* key matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 - -#define MOUSEKEY_DELAY 100 -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 3 -#define MOUSEKEY_TIME_TO_MAX 10 - -#define TAPPING_TOGGLE 1 - -#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } -#define ROWS (int []){ D0, D5, B5, B6 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 2 -#define TAPPING_TERM 200 -#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ - keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ -) - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -//#define DEBUG_MATRIX_SCAN_RATE - -// CUSTOM -#define PREVENT_STUCK_MODIFIERS - -#endif -- cgit v1.2.3