From 552399df4cef88463ea8ac40822d776d0fb90e18 Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Mon, 8 Aug 2016 18:34:08 -0700 Subject: Adding my own keymaps to the following keyboards: Planck, Preonic, Atreus, Ergodox --- keyboards/ergodox/keymaps/xyverz/dvorak.png | Bin 0 -> 87314 bytes keyboards/ergodox/keymaps/xyverz/keymap.c | 184 +++++++++++++++ keyboards/ergodox/keymaps/xyverz/old_keymap.c | 311 ++++++++++++++++++++++++++ keyboards/ergodox/keymaps/xyverz/readme.md | 10 + 4 files changed, 505 insertions(+) create mode 100644 keyboards/ergodox/keymaps/xyverz/dvorak.png create mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c create mode 100644 keyboards/ergodox/keymaps/xyverz/old_keymap.c create mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/dvorak.png b/keyboards/ergodox/keymaps/xyverz/dvorak.png new file mode 100644 index 000000000..cb8316309 Binary files /dev/null and b/keyboards/ergodox/keymaps/xyverz/dvorak.png differ diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c new file mode 100644 index 000000000..dd39dbacb --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | \ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | O | E | U | I |------| |------| D | H | T | N |S / L2| - | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + TG(1), KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, LT(MDIA, KC_S), KC_MINS, + MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, + KC_UP, KC_DOWN,KC_SLSH,KC_EQL, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/xyverz/old_keymap.c b/keyboards/ergodox/keymaps/xyverz/old_keymap.c new file mode 100644 index 000000000..e082372f9 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/old_keymap.c @@ -0,0 +1,311 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +extern keymap_config_t keymap_config; + +#define _DVORAK 0 // default layer +#define _QWERTY 1 // symbols +#define _LOWER 2 +#define _RAISE 3 +#define _ADJUST 16 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* + * Keymap 0: Dvorak + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | Esc | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | Y | Y |(Null)| |(Null)| F | G | C | R | L | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| FN1 | | FN2 |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + * + * + ***************************************************************************************************** + * This Dvorak keyboard layout stems from my early Kinesis years, using the Contour PS/2 with a Dvorak + * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the cor- + * ner keys. I've decided to continue using this layout with my ErgoDox. + */ + + [_DVORAK] = ( + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, LOWER, + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + NO, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + RAISE, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, + KC_RALT, KC_RCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC +), + +/* Keymap 1: QWERTY + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +[_QWERTY] = ( + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, LOWER, + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + {ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + RAISE, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT +), + + +/* Lower 2: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[_LOWER] = ( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Raise 3: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[_RAISE] = ( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), + +/* Adjust 16: Lower + Raise + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | Reset| | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| |Dvorak|Qwerty| | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[_ADJUST] = ( + KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, QWERTY, DVORAK, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + + } + return MACRO_NONE; +}; + + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md new file mode 100644 index 000000000..8f6dba45e --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -0,0 +1,10 @@ +# ErgoDox EZ Default Configuration + +## Changelog + +* Feb 2, 2016 (V1.1): + * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). + +This is what we ship with out of the factory. :) The image says it all: + +![Default](default_highres.png) -- cgit v1.2.3 From de1db144d06b488937633110b0598a1cac68f4fc Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:44:09 -0700 Subject: Delete dvorak.png Not reflective of my layout.--- keyboards/ergodox/keymaps/xyverz/dvorak.png | Bin 87314 -> 0 bytes 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/dvorak.png (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/dvorak.png b/keyboards/ergodox/keymaps/xyverz/dvorak.png deleted file mode 100644 index cb8316309..000000000 Binary files a/keyboards/ergodox/keymaps/xyverz/dvorak.png and /dev/null differ -- cgit v1.2.3 From bf93fa510bcc5cec84bcd9d81cb8fae6beb1ebb4 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:46:34 -0700 Subject: Delete readme.md file cleanup, removing file that doesn't apply to my layout.--- keyboards/ergodox/keymaps/xyverz/readme.md | 10 ---------- 1 file changed, 10 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md deleted file mode 100644 index 8f6dba45e..000000000 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# ErgoDox EZ Default Configuration - -## Changelog - -* Feb 2, 2016 (V1.1): - * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). - -This is what we ship with out of the factory. :) The image says it all: - -![Default](default_highres.png) -- cgit v1.2.3 From c060afe68eb729fd3afcfdb3f16e28730ab868b3 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:47:13 -0700 Subject: Delete old_keymap.c file cleanup--- keyboards/ergodox/keymaps/xyverz/old_keymap.c | 311 -------------------------- 1 file changed, 311 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/old_keymap.c (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/old_keymap.c b/keyboards/ergodox/keymaps/xyverz/old_keymap.c deleted file mode 100644 index e082372f9..000000000 --- a/keyboards/ergodox/keymaps/xyverz/old_keymap.c +++ /dev/null @@ -1,311 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" - -extern keymap_config_t keymap_config; - -#define _DVORAK 0 // default layer -#define _QWERTY 1 // symbols -#define _LOWER 2 -#define _RAISE 3 -#define _ADJUST 16 - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* - * Keymap 0: Dvorak - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ] | 1 | 2 | 3 | 4 | 5 | Esc | | ESC | 6 | 7 | 8 | 9 | 0 | [ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | ' | , | . | Y | Y |(Null)| |(Null)| F | G | C | R | L | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | - * |--------+------+------+------+------+------| FN1 | | FN2 |------+------+------+------+------+--------| - * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | LCtr | LAlt | | Ralt | RCtr | - * ,------|------|------| |------+------+------. - * | | | Home | | PgUp | | | - * | BkSp | Del |------| |------| Enter| Space| - * | | | End | | PgDn | | | - * `--------------------' `--------------------' - * - * - ***************************************************************************************************** - * This Dvorak keyboard layout stems from my early Kinesis years, using the Contour PS/2 with a Dvorak - * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the cor- - * ner keys. I've decided to continue using this layout with my ErgoDox. - */ - - [_DVORAK] = ( - KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, - KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, LOWER, - KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, - KC_LCTL, KC_LALT, - KC_HOME, - KC_BSPC, KC_DEL, KC_END, - // right hand - KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, - NO, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, - KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, - RAISE, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, - KC_RALT, KC_RCTL, - KC_PGUP, - KC_PGDN, KC_ENT, KC_SPC -), - -/* Keymap 1: QWERTY - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | | | Home | | PgUp | | | - * | Space|Backsp|------| |------| Tab |Enter | - * | |ace | End | | PgDn | | | - * `--------------------' `----------------------' - */ -[_QWERTY] = ( - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, LOWER, - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - {ALT_T(KC_APP), KC_LGUI, - KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - RAISE, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP, - KC_PGDN,KC_TAB, KC_ENT -), - - -/* Lower 2: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[_LOWER] = ( - // left hand - KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), - -/* Raise 3: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | |Brwser| - * | | |------| |------| |Back | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[_RAISE] = ( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), - -/* Adjust 16: Lower + Raise - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | Reset| | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| |Dvorak|Qwerty| | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[_ADJUST] = ( - KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, QWERTY, DVORAK, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), - -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _DVORAK: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_DVORAK); - } - break; - case _QWERTY: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_QWERTY); - } - break; - case _LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - break; - case _RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - break; - - } - return MACRO_NONE; -}; - - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; -- cgit v1.2.3 From c062b6a13d7974144b5ab02896d2213051fd91ad Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:52:48 -0700 Subject: Delete keymap.c file cleanup--- keyboards/ergodox/keymaps/xyverz/keymap.c | 184 ------------------------------ 1 file changed, 184 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c deleted file mode 100644 index dd39dbacb..000000000 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,184 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | \ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | O | E | U | I |------| |------| D | H | T | N |S / L2| - | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | | | Home | | PgUp | | | - * | Space|Backsp|------| |------| Tab |Enter | - * | |ace | End | | PgDn | | | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP( // layer 0 : default - // left hand - KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, - KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), - KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, - KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, - TG(1), KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, - KC_D, KC_H, KC_T, KC_N, LT(MDIA, KC_S), KC_MINS, - MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, - KC_UP, KC_DOWN,KC_SLSH,KC_EQL, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP( - // left hand - KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | |Brwser| - * | | |------| |------| |Back | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; -- cgit v1.2.3 From 6f700f1eb0c76aa19187efd83ab2b49a0db7f71f Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Tue, 9 Aug 2016 23:49:27 -0700 Subject: Adding my own layouts for the Phantom and Ergodox. My Ergodox layout adds persistent layers based on the Planck and Preonic setup. The layout arrays are pulled directly from the ergodox/ez/ez.h keymap definition starting at line 81. --- keyboards/ergodox/keymaps/xyverz/keymap.c | 311 ++++++++++++++++++++++++++++++ keyboards/phantom/keymaps/xyverz/keymap.c | 67 +++++++ 2 files changed, 378 insertions(+) create mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c create mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c new file mode 100644 index 000000000..c5ce99dd2 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -0,0 +1,311 @@ +/* + * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak + * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner + * keys. I've decided to continue using this layout with my ErgoDox. + * + * The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional + * keys as shown in the diagrams. The Colemak layout is merely an adaptation of that. + * + * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck + * layouts. + * + * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the + * keymap is defined, beginning on line 81. + * + */ + +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 // Dvorak layer +#define _QW 1 // Qwerty layer +#define _CM 2 // Colemak layer +#define _MD 3 // Media Layer +#define _KP 4 // Keypad Layer + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Dvorak layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + * + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[_DV] = { // layer 0 : Dvorak + // left hand + {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, + {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END }, + {KC_2, KC_COMM, KC_O, KC_Q, KC_INS, KC_DEL }, + {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT, KC_BSPC}, + {KC_4, KC_P, KC_U, KC_K, KC_RGHT, KC_HOME}, + {KC_5, KC_Y, KC_I, KC_X, KC_NO, KC_LCTL}, + {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + + // right hand + {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, + {KC_6, KC_F, KC_D, KC_B, KC_NO, KC_RCTL}, + {KC_7, KC_G, KC_H, KC_M, KC_UP, KC_PGUP}, + {KC_8, KC_C, KC_T, KC_W, KC_DOWN, KC_SPC }, + {KC_9, KC_R, KC_N, KC_V, KC_SLSH, KC_ENT }, + {KC_0, KC_L, KC_S, KC_Z, KC_EQL, KC_PGDN}, + {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO } +}, + +/* Keymap 1: QWERTY layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[_QW] = { // layer 1 : QWERTY + // left hand + {KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, + {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, + {KC_2, KC_W, KC_S, KC_X, KC_INS, KC_DEL }, + {KC_3, KC_E, KC_D, KC_C, KC_LEFT, KC_BSPC}, + {KC_4, KC_R, KC_F, KC_V, KC_RGHT, KC_HOME}, + {KC_5, KC_T, KC_G, KC_B, KC_NO, KC_LCTL}, + {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + + // right hand + {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, + {KC_6, KC_Y, KC_H, KC_N, KC_NO, KC_RCTL}, + {KC_7, KC_U, KC_J, KC_M, KC_UP, KC_PGUP}, + {KC_8, KC_I, KC_K, KC_COMM, KC_DOWN, KC_SPC }, + {KC_9, KC_O, KC_L, KC_DOT, KC_LBRC, KC_ENT }, + {KC_0, KC_P, KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN}, + {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } + }, + +/* Keymap 2: Colemak layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[_CM] = { // layer 2 : Colemak + // left hand + {KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, KC_NO }, + {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, + {KC_2, KC_W, KC_R, KC_X, KC_INS, KC_DEL }, + {KC_3, KC_F, KC_S, KC_C, KC_LEFT, KC_BSPC}, + {KC_4, KC_P, KC_T, KC_V, KC_RGHT, KC_HOME}, + {KC_5, KC_G, KC_D, KC_B, KC_NO, KC_LCTL}, + {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + + // right hand + {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, + {KC_6, KC_J, KC_H, KC_K, KC_NO, KC_RCTL}, + {KC_7, KC_L, KC_N, KC_M, KC_UP, KC_PGUP}, + {KC_8, KC_U, KC_E, KC_COMM, KC_DOWN, KC_SPC }, + {KC_9, KC_Y, KC_I, KC_DOT, KC_LBRC, KC_ENT }, + {KC_0, KC_SCLN, KC_O, KC_SLSH, KC_RBRC, KC_PGDN}, + {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } + }, + +/* Keymap 3: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | PrSc | ScLk | Paus | | FN4 | | FN5 | | Mute | Vol- | Vol+ | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | + * |--------+------+------+------+------+------| FN4 | | FN5 |------+------+------+------+------+--------| + * | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Media Layer +[_MD] = { // layer 3 : Media layer + // left hand + {RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO }, + {KC_F1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F2, KC_PSCR, KC_TRNS, DVORAK, KC_TRNS, KC_TRNS}, + {KC_F3, KC_SLCK, KC_TRNS, QWERTY, KC_TRNS, KC_TRNS}, + {KC_F4, KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS}, + {KC_F5, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, + {KC_F11, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + + // right hand + {KC_F12, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + {KC_F6, KC_TRNS, KC_MSTP, KC_TRNS, KC_NO, KC_TRNS}, + {KC_F7, KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F8, KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F9, KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F10, KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO } + }, + +/* Keymap 4: Keypad layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Power | | | | | | | | | | NmLk | KP / | KP * | KP - | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Sleep | | | | | | FN5 | | FN4 | | KP 7 | KP 8 | KP 9 | KP + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | + * |--------+------+------+------+------+------| FN5 | | FN4 |------+------+------+------+------+--------| + * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | KP 0 | | KP . |KP Ent| | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Keypad Layer +[_KP] = { // layer 4 : Keypad layer + // left hand + {KC_PWR, KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO }, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, + {KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + + // right hand + {KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, + {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, KC_TRNS}, + {KC_PSLS, KC_P8, KC_P5, KC_P2, KC_NO, KC_TRNS}, + {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, KC_TRNS}, + {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO } + }, + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c new file mode 100644 index 000000000..5948e4ca5 --- /dev/null +++ b/keyboards/phantom/keymaps/xyverz/keymap.c @@ -0,0 +1,67 @@ +#include "phantom.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------------------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus| + * |-----------------------------------------------------------| |--------------| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp| + * |-----------------------------------------------------------| |--------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn| + * |-----------------------------------------------------------| `--------------' + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| ,----. + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |-----------------------------------------------------------| ,-------------. + * |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig | + * `-----------------------------------------------------------' `-------------' + */ +[_BL] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------------------------. + * |RESET| | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| |--------------| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| |--------------| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| `--------------' + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------| ,----. + * | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | | + * |-----------------------------------------------------------| ,-------------. + * | | | | | | | | | | | | | + * `-----------------------------------------------------------' `-------------' + */ +[_FL] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_SLEP, \ + RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,KC_MSEL, KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_CAPS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS) +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { +} -- cgit v1.2.3 From b98d47abe544c68ffba745b6643a777f8f61a03c Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Fri, 12 Aug 2016 16:36:07 +0200 Subject: ergodox: Update my keymap to v1.5 Major changes include: * The **1HAND** layer has been removed. * A `Delete` key is now available on the right thumb cluster. * The **ADORE** layer received a major update, see the updated layout image. * It is now possible to enable automatic logging for the **ADORE** layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default. * The `~` key and the `Media Next/Prev` key have been swapped on the **base** layer. * On the **ARROW** layer, `Backspace` has been replaced by `Enter`. * There is some experimental support for entering Unicode symbols. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/Makefile | 7 + .../keymaps/algernon/images/adore-layer.png | Bin 95615 -> 93748 bytes .../ergodox/keymaps/algernon/images/base-layer.png | Bin 95654 -> 95222 bytes .../keymaps/algernon/images/one-handed-layer.png | Bin 91140 -> 0 bytes keyboards/ergodox/keymaps/algernon/keymap.c | 2422 ++++++++++---------- keyboards/ergodox/keymaps/algernon/readme.md | 52 +- 6 files changed, 1244 insertions(+), 1237 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile index 6bf3976b9..00194857a 100644 --- a/keyboards/ergodox/keymaps/algernon/Makefile +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -8,10 +8,17 @@ CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes KEYLOGGER_ENABLE ?= yes +ADORE_AUTOLOG ?= no + ifeq (${FORCE_NKRO},yes) OPT_DEFS += -DFORCE_NKRO endif +ifeq (${ADORE_AUTOLOG},yes) +KEYLOGGER_ENABLE = yes +OPT_DEFS += -DADORE_AUTOLOG +endif + ifeq (${KEYLOGGER_ENABLE},yes) OPT_DEFS += -DKEYLOGGER_ENABLE CONSOLE_ENABLE = yes diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png index 3df68ea53..44ad8a1eb 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png and b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png index 7b25a05b3..da159fbe2 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/base-layer.png and b/keyboards/ergodox/keymaps/algernon/images/base-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png b/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png deleted file mode 100644 index 698d11e5f..000000000 Binary files a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png and /dev/null differ diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index c4de53da2..244bfb51f 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -1,1218 +1,1206 @@ -/* - * algernon's ErgoDox EZ layout, please see the readme.md file! - */ - -#include "ergodox.h" -#include "led.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" -#include "mousekey.h" -#include "timer.h" -#include "keymap_plover.h" -#include "eeconfig.h" -#include "wait.h" +/* + * algernon's ErgoDox EZ layout, please see the readme.md file! + */ + +#include "ergodox.h" +#include "led.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "mousekey.h" +#include "timer.h" +#include "keymap_plover.h" +#include "eeconfig.h" +#include "wait.h" #include "version.h" - -/* Layers */ - -enum { - BASE = 0, - ADORE, - ARRW, - APPSEL, - HUN, - NMDIA, - OHLFT, - OHRGT, - PLVR, -}; - -/* Macros */ - -enum { - NONE = 0, - // Buttons that do extra stuff - A_GUI, - A_PLVR, - A_ESC, - A_MPN, - - // Function / number keys - KF_1, // 1, F1 - KF_2, // 2, F2 - KF_3, // ... - KF_4, - KF_5, - KF_6, - KF_7, - KF_8, - KF_9, - KF_10, - KF_11, // =, F11 - - // Application select keys - APP_SLK, // Slack - APP_EMCS, // Emacs - APP_TERM, // Terminal - APP_CHRM, // Chrome - APP_MSIC, // Music - - // Diagonal mouse movement - A_MUL, - A_MUR, - A_MDL, - A_MDR, - - // Hungarian layer keys - HU_AA, // Á - HU_OO, // Ó - HU_EE, // É - HU_UU, // Ú - HU_II, // Í - HU_OE, // Ö - HU_UE, // Ü - HU_OEE, // Ő - HU_UEE, // Ű - - // One-handed layout specials - OH_BSSPC, - OH_ENTSFT, - OH_BASE, - OH_LEFT, - OH_RIGHT, -}; - -/* Fn keys */ - -enum { - F_BSE = 0, - F_HUN, - F_GUI, - F_SFT, - F_ALT, - F_CTRL -}; - -/* Custom keycodes */ - -enum { - CT_CLN = 0, - CT_MNS, - CT_TA, -}; - -/* States & timers */ - -uint16_t gui_timer = 0; - -uint16_t kf_timers[12]; - -uint16_t oh_base_timer = 0; -uint16_t oh_bsspc_timer = 0; -uint16_t oh_entsft_timer = 0; - -#define OH_BLINK_INTERVAL 500 - -uint8_t oh_left_blink = 0; -uint16_t oh_left_blink_timer = 0; -uint8_t oh_right_blink = 0; -uint16_t oh_right_blink_timer = 0; - -#if KEYLOGGER_ENABLE -bool log_enable = false; -#endif - -bool time_travel = false; - -/* The Keymap */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Keymap 0: Base Layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | Next/Prev | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| - * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | : | | - | | | | | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | LAlt | GUI | | MDIA | 1HND | - * ,------|------|------| |------+------+------. - * | | | Ctrl | | LEAD | | | - * |Backsp|LShift|------| |------| Enter| Space| - * | | | ESC | | HUN | | | - * `--------------------' `--------------------' - */ -[BASE] = KEYMAP( -// left hand - KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,M(A_MPN) ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) - - ,F(F_ALT),F(F_GUI) - ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) - - // right hand - ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS - ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP - ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,OSL(NMDIA),M(OH_LEFT) - ,KC_LEAD - ,F(F_HUN) ,KC_ENT ,KC_SPC - ), - -/* Keymap 1: Adore layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | Next/Prev | , | . | L | W | M | [ | | ] | F | H | C | P | Y | \ | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| - * | Play/Pause| / | Z | ' | K | X | | | | B | G | V | J | Q | Stop | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | : | | - | | | | | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | LAlt | GUI | | MDIA | 1HND | - * ,------|------|------| |------+------+------. - * | | | Ctrl | | LEAD | | | - * |Backsp|LShift|------| |------| Enter| Space| - * | | | ESC | | HUN | | | - * `--------------------' `--------------------' - */ -[ADORE] = KEYMAP( -// left hand - KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,M(A_MPN) ,KC_COMM ,KC_DOT ,KC_L ,KC_W ,KC_M ,KC_LBRC -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U -,KC_MPLY ,KC_SLSH ,KC_Z ,KC_QUOT,KC_K ,KC_X ,KC_LPRN -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) - - ,F(F_ALT),F(F_GUI) - ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) - - // right hand - ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,KC_RBRC ,KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS - ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_RPRN ,KC_B ,KC_G ,KC_V ,KC_J ,KC_Q ,KC_MSTP - ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,OSL(NMDIA),M(OH_LEFT) - ,KC_LEAD - ,F(F_HUN) ,KC_ENT ,KC_SPC - ), - -/* Keymap 2: Arrow layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | Home | Up | End | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | Left | Down | Rght | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| PgUp | PgDn | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[ARRW] = KEYMAP( -// left hand - KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_PGUP ,KC_PGDN - ), - -/* Keymap 3: Application select layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[APPSEL] = KEYMAP( -// left hand - KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - ), - - -/* Keymap 4: Hungarian Layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | Ő | | Ű | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | Á | Ó | É | Ú | Í |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | Ö | | Ü | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | BASE | | | - * `--------------------' `--------------------' - */ - -[HUN] = KEYMAP( -// left hand - KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO -,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II) -,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,F(F_BSE),KC_TRNS ,KC_TRNS - ), - -/* Keymap 5: Navigation & Media layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen| - * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------| - * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | | - * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------| - * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | Mute | VlUp | | BASE | MClk | - * ,------|------|------| |------+------+------. - * | | | VlDn | | Prev |Left |Right | - * | SPC | Enter|------| |------| Click| Click| - * | | | ESC | | Next | | | - * `--------------------' `--------------------' - */ -[NMDIA] = KEYMAP( -// left hand - KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) -,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO -,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO -,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_MUTE ,KC_VOLU - ,KC_VOLD - ,KC_SPC,KC_ENTER,M(A_ESC) - - // right hand - ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR - ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO - ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_TRNS ,KC_MS_BTN3 - ,KC_MPRV - ,KC_MNXT ,KC_BTN1 ,KC_BTN2 - ), - -/* Keymap 6: One-handed, left side - * - * ,-----------------------------------------------------. - * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 |A BSE| - * |-----------+------+------+------+------+-------------| - * | Tab | ' | , | . | P | Y | [ | - * |-----------+------+------+------+------+------| | - * | - | A | O | E | U | I |------| - * |-----------+------+------+------+------+------| ( | - * | Play/Pause| ; | Q | J | K | X | | - * `-----------+------+------+------+------+-------------' - * | Home | End | Down | Up | ESC | - * `-----------------------------------' - * ,-------------. - * | LAlt | GUI | - * ,------|------|------| - * |BackSp|LShift| Ctrl | - * | | |------| - * |Space |Enter |OTHER | - * `--------------------' - */ -[OHLFT] = KEYMAP( -// left hand - KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3) ,M(KF_4) ,M(KF_5) ,M(OH_BASE) -,KC_TAB ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC -,KC_MINS ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SCLN ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN -,KC_HOME ,KC_END ,KC_DOWN ,KC_UP ,M(A_ESC) - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_RIGHT) - - // right hand - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_NO ,KC_NO - ), - -/* Keymap 7: One-handed, right side - * - * ,-----------------------------------------------------. - * | = F11 | 0 F10| 9 F9 | 8 F8 | 7 F7 | 6 F6 |A BSE| - * |-----------+------+------+------+------+-------------| - * | / | L | R | C | G | F | ] | - * |-----------+------+------+------+------+------| | - * | \ | S | N | T | H | D |------| - * |-----------+------+------+------+------+------| ) | - * | Stop | Z | V | W | M | B | | - * `-----------+------+------+------+------+-------------' - * | PgDn | PgUp | Right| Left | ESC | - * `-----------------------------------' - * ,-------------. - * | LAlt | GUI | - * ,------|------|------| - * |BackSp|LShift| Ctrl | - * | | |------| - * |Space |Enter |OTHER | - * `--------------------' - */ -[OHRGT] = KEYMAP( -// left hand - M(KF_11) ,M(KF_10) ,M(KF_9) ,M(KF_8) ,M(KF_7) ,M(KF_6) ,M(OH_BASE) -,KC_SLSH ,KC_L ,KC_R ,KC_C ,KC_G ,KC_F ,KC_RBRC -,KC_BSLS ,KC_S ,KC_N ,KC_T ,KC_H ,KC_D -,KC_MSTP ,KC_Z ,KC_V ,KC_W ,KC_M ,KC_B ,KC_RPRN -,KC_PGDN ,KC_PGUP ,KC_RGHT ,KC_LEFT ,M(A_ESC) - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_LEFT) - - // right hand - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_NO ,KC_NO - ), - -/* Keymap 8: Steno for Plover - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | BASE | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | # | # | # | # | # | # | | # | # | # | # | # | # | # | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | T | P | H | |------| |------| | F | P | L | T | D | - * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------| - * | | | K | W | R | | | | | | R | B | G | S | Z | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | A | O |------| |------| E | U | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[PLVR] = KEYMAP( -// left hand -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR), -KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, -KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, -KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - PV_A, PV_O, KC_NO, - - // right hand - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, - PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, - PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - KC_NO,PV_E, PV_U - ), - -}; - -const uint16_t PROGMEM fn_actions[] = { - [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS) - ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS) - ,[F_GUI] = ACTION_MACRO_TAP(A_GUI) - ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) - ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) - ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) -}; - -void toggle_steno(int pressed) -{ - uint8_t layer = biton32(layer_state); - - if (pressed) { - if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR); - - register_code(PV_LP); - register_code(PV_LH); - register_code(PV_LR); - register_code(PV_O); - register_code(PV_RL); - register_code(PV_RG); - } else { - unregister_code(PV_LP); - unregister_code(PV_LH); - unregister_code(PV_LR); - unregister_code(PV_O); - unregister_code(PV_RL); - unregister_code(PV_RG); - } -} - -macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) -{ - uint8_t need_shift = 0; - uint8_t hold_shift = 0; - - if (!record->event.pressed) - return MACRO_NONE; - - layer_off (HUN); - - if (keyboard_report->mods & MOD_BIT (KC_LSFT)) { - hold_shift = 1; - need_shift = 1; - unregister_code (KC_LSFT); - } - if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) { - need_shift = 1; - hold_shift = 0; - unregister_code (KC_LSFT); - } - - clear_oneshot_mods (); - - register_code (KC_RALT); - unregister_code (KC_RALT); - if (accent == (KC_DQT)) { - register_code (KC_RSFT); - } - register_code (accent); - unregister_code (accent); - if (need_shift && accent != (KC_DQT)) { - register_code (KC_RSFT); - } else if (accent == (KC_DQT) && !need_shift) { - unregister_code (KC_RSFT); - } - register_code (hun_char); - unregister_code (hun_char); - if (need_shift || accent == (KC_DQT)) - unregister_code (KC_RSFT); - if (hold_shift) - register_code (KC_LSFT); - - return MACRO_NONE; -} - -void ang_handle_kf (keyrecord_t *record, uint8_t id) -{ - uint8_t code = id - KF_1; - - if (record->event.pressed) { - kf_timers[code] = timer_read (); - } else { - uint8_t kc; - - if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) { - // Long press - kc = KC_F1 + code; - } else { - if (id == KF_11) - kc = KC_EQL; - else - kc = KC_1 + code; - } - - register_code (kc); - unregister_code (kc); - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case A_ESC: - if (record->event.pressed) { - if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { - clear_oneshot_mods (); - } else { - register_code (KC_ESC); - } - layer_off (HUN); - } else { - unregister_code (KC_ESC); - } - break; - - case A_MPN: - if (record->event.pressed) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out()); - - if (oneshot) - clear_oneshot_mods (); - unregister_code (KC_LSFT); - - register_code (KC_MPRV); - unregister_code (KC_MPRV); - - if (!oneshot) - register_code (KC_LSFT); - } else { - return MACRO (T(MNXT), END); - } - } - break; - - /* Hungarian layer */ - case HU_AA: - return ang_do_hun (record, KC_QUOT, KC_A); - case HU_OO: - return ang_do_hun (record, KC_QUOT, KC_O); - case HU_EE: - return ang_do_hun (record, KC_QUOT, KC_E); - case HU_UU: - return ang_do_hun (record, KC_QUOT, KC_U); - case HU_II: - return ang_do_hun (record, KC_QUOT, KC_I); - case HU_OE: - return ang_do_hun (record, KC_DQT, KC_O); - case HU_UE: - return ang_do_hun (record, KC_DQT, KC_U); - case HU_OEE: - return ang_do_hun (record, KC_EQL, KC_O); - case HU_UEE: - return ang_do_hun (record, KC_EQL, KC_U); - - /* Mouse movement */ - case A_MUL: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - } - mousekey_send(); - break; - - case A_MUR: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - } - mousekey_send(); - break; - - case A_MDL: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - } - mousekey_send(); - break; - - case A_MDR: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - } - mousekey_send(); - break; - - /* Plover base */ - case A_PLVR: - toggle_steno(record->event.pressed); - break; - - /* GUI & AppSel */ - case A_GUI: - if (record->event.pressed) { - register_code (KC_LGUI); - if (record->tap.count && !record->tap.interrupted) { - if (record->tap.count >= 2) { - register_code (KC_W); - layer_on (APPSEL); - set_oneshot_layer (APPSEL, ONESHOT_START); - } - } else { - record->tap.count = 0; - } - gui_timer = 0; - } else { - if (record->tap.count >= 2) - { - unregister_code (KC_W); - clear_oneshot_layer_state (ONESHOT_PRESSED); - } - gui_timer = timer_read (); - } - break; - - case APP_SLK: - return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); - - case APP_EMCS: - return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(ENT), END); - - case APP_TERM: - return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END); - - case APP_CHRM: - return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); - - case APP_MSIC: - return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); - - /* Function keys */ - case KF_1 ... KF_11: - ang_handle_kf (record, id); - break; - - /* 1HAND layout */ - case OH_BASE: - if (record->event.pressed) { - oh_base_timer = timer_read (); - } else { - if (timer_elapsed (oh_base_timer) > TAPPING_TERM) { - layer_clear (); - } else { - return MACRO (T(APP), END); - } - } - break; - - case OH_BSSPC: - if (record->event.pressed) { - oh_bsspc_timer = timer_read (); - } else { - if (timer_elapsed (oh_bsspc_timer) > TAPPING_TERM) { - return MACRO (T(BSPC), END); - } else { - return MACRO (T(SPC), END); - } - } - break; - - case OH_ENTSFT: - if (record->event.pressed) { - oh_entsft_timer = timer_read (); - } else { - if (timer_elapsed (oh_entsft_timer) > TAPPING_TERM) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT)) - unregister_code (KC_LSFT); - else - register_code (KC_LSFT); - } else { - return MACRO (T(ENT), END); - } - } - break; - - case OH_LEFT: - if (record->event.pressed) { - layer_move (OHLFT); - oh_left_blink = 1; - oh_left_blink_timer = timer_read (); - ergodox_right_led_1_on (); - } - break; - - case OH_RIGHT: - if (record->event.pressed) { - layer_move (OHRGT); - oh_right_blink = 1; - oh_right_blink_timer = timer_read (); - ergodox_right_led_3_on (); - } - break; - } - return MACRO_NONE; -}; - -uint8_t is_adore = 0; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - uint8_t dl; - - ergodox_led_all_on(); - for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { - ergodox_led_all_set (i); - wait_ms (5); - } - wait_ms(1000); - for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { - ergodox_led_all_set (i); - wait_ms (10); - } - ergodox_led_all_off(); - - if (!eeconfig_is_enabled()) - eeconfig_init(); - dl = eeconfig_read_default_layer (); - if (dl == (1UL << ADORE)) - is_adore = 1; -}; - -LEADER_EXTERNS(); - -void ang_do_unicode (void) { - register_code (KC_RCTL); - register_code (KC_RSFT); - register_code (KC_U); - unregister_code (KC_U); - unregister_code (KC_RSFT); - unregister_code (KC_RCTL); - wait_ms (100); -} - -void ang_tap (uint16_t codes[]) { - for (int i = 0; codes[i] != 0; i++) { - register_code (codes[i]); - unregister_code (codes[i]); - wait_ms (50); - } -} - -#define TAP_ONCE(code) \ - register_code (code); \ - unregister_code (code) - -void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_RSFT); - register_code (KC_SCLN); - } else if (state->count == 2) { - register_code (KC_SCLN); - } -} - -void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_SCLN); - unregister_code (KC_RSFT); - } else if (state->count == 2) { - unregister_code (KC_SCLN); - } -} - -void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_MINS); - } else if (state->count == 2) { - register_code (KC_RSFT); - register_code (KC_MINS); - } -} - -void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_MINS); - } else if (state->count == 2) { - unregister_code (KC_RSFT); - unregister_code (KC_MINS); - } -} - -typedef struct { - bool layer_toggle; - bool sticky; - bool finished_once; -} td_ta_state_t; - -void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { - td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - - if (td_ta->finished_once) { - return; - } - - if (td_ta->sticky) { - td_ta->sticky = false; - td_ta->layer_toggle = false; - layer_off (ARRW); - return; - } - - td_ta->finished_once = true; - if (state->count == 1 && !state->pressed) { - register_code (KC_TAB); - td_ta->sticky = false; - td_ta->layer_toggle = false; - } else { - td_ta->layer_toggle = true; - layer_on (ARRW); - td_ta->sticky = (state->count == 2); - } -} - -void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { - td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - - if (!td_ta->layer_toggle) - unregister_code (KC_TAB); - if (!td_ta->sticky) - layer_off (ARRW); - - td_ta->finished_once = false; -} - -const qk_tap_dance_action_t tap_dance_actions[] = { - [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) - ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) - ,[CT_TA] = { - .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, - .user_data = (void *)&((td_ta_state_t) { false, false, false }) - } -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) - unregister_code (KC_LGUI); - - if (layer != OHLFT) - oh_left_blink = 0; - if (layer != OHRGT) - oh_right_blink = 0; - - if (layer == HUN) { - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); - } else if (layer == NMDIA) { - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - } else if (layer == PLVR) { - ergodox_right_led_1_on (); - ergodox_right_led_2_on (); - ergodox_right_led_3_on (); - } else if (layer == ADORE) { - ergodox_right_led_1_on (); - ergodox_right_led_2_on (); - ergodox_right_led_3_on (); - - ergodox_right_led_2_set (LED_BRIGHTNESS_HI); - } - - if (layer == OHLFT || layer == OHRGT) { - ergodox_right_led_2_on(); - - if (oh_left_blink) { - if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL) { - if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) == 0) - ergodox_right_led_1_off (); - } - if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL * 2) { - ergodox_right_led_1_on (); - oh_left_blink_timer = timer_read (); - } - } - - if (oh_right_blink) { - if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL) { - if ((keyboard_report->mods & MOD_BIT(KC_LCTRL)) == 0) - ergodox_right_led_3_off (); - } - if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL * 2) { - ergodox_right_led_3_on (); - oh_right_blink_timer = timer_read (); - } - } - } - - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_1_set (LED_BRIGHTNESS_HI); - ergodox_right_led_1_on (); - } else { - ergodox_right_led_1_set (LED_BRIGHTNESS_LO); - if (layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE) - ergodox_right_led_1_off (); - } - - if (keyboard_report->mods & MOD_BIT(KC_LALT) || - ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_2_set (LED_BRIGHTNESS_HI); - ergodox_right_led_2_on (); - } else { - ergodox_right_led_2_set (LED_BRIGHTNESS_LO); - if (layer != OHRGT && layer != HUN && layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE) - ergodox_right_led_2_off (); - } - - if (keyboard_report->mods & MOD_BIT(KC_LCTRL) || - ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_3_set (LED_BRIGHTNESS_HI); - ergodox_right_led_3_on (); - } else { - ergodox_right_led_3_set (LED_BRIGHTNESS_LO); - if (layer != OHRGT && layer != HUN && layer != PLVR && layer != ADORE) - ergodox_right_led_3_off (); - } - - LEADER_DICTIONARY() { - leading = false; - leader_end (); - -#if KEYLOGGER_ENABLE - SEQ_ONE_KEY (KC_D) { - ergodox_led_all_on(); - wait_ms(100); - ergodox_led_all_off(); - log_enable = !log_enable; - } -#endif - - SEQ_ONE_KEY (KC_T) { - time_travel = !time_travel; - } - - SEQ_ONE_KEY (KC_U) { - ang_do_unicode (); - } - - SEQ_ONE_KEY (KC_V) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")"); - } - - SEQ_ONE_KEY (KC_L) { - /* λ */ - ang_do_unicode (); - - uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0}; - ang_tap (codes); - } - - SEQ_ONE_KEY (KC_Y) { - uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0}; - ang_tap (codes); - } - - SEQ_ONE_KEY (KC_S) { - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); - TAP_ONCE (KC_BSLS); - register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); - ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC); - register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); - TAP_ONCE (KC_SLSH); - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); - } - - SEQ_TWO_KEYS (KC_W, KC_M) { - register_code (KC_LALT); - register_code (KC_F2); - unregister_code (KC_F2); - unregister_code (KC_LALT); - - wait_ms (1000); - - uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; - ang_tap (codes); - register_code (KC_LGUI); - register_code (KC_UP); - unregister_code (KC_UP); - unregister_code (KC_LGUI); - } - - SEQ_ONE_KEY (KC_A) { - if (is_adore == 0) { - default_layer_and (0); - default_layer_or ((1UL << ADORE)); - eeconfig_update_default_layer ((1UL << ADORE)); - is_adore = 1; - - ergodox_led_all_off (); - ergodox_right_led_3_on (); - wait_ms (100); - ergodox_right_led_2_on (); - wait_ms (100); - ergodox_right_led_3_off (); - ergodox_right_led_1_on (); - wait_ms (100); - ergodox_right_led_2_off (); - wait_ms (100); - ergodox_right_led_1_off (); - } else { - is_adore = 0; - default_layer_and (0); - default_layer_or (1UL << BASE); - eeconfig_update_default_layer ((1UL << BASE)); - - ergodox_led_all_off (); - ergodox_right_led_1_on (); - wait_ms (100); - ergodox_right_led_2_on (); - wait_ms (100); - ergodox_right_led_1_off (); - ergodox_right_led_3_on (); - wait_ms (100); - ergodox_right_led_2_off (); - wait_ms (100); - ergodox_right_led_3_off (); - } - } - } -} - -static uint16_t last4[4]; - -bool process_record_user (uint16_t keycode, keyrecord_t *record) { -#if KEYLOGGER_ENABLE - uint8_t layer = biton32(layer_state); - - if (log_enable && layer == BASE) { - xprintf ("KL: col=%d, row=%d\n", record->event.key.col, - record->event.key.row); - } -#endif - - if (time_travel && !record->event.pressed) { - uint8_t p; - - // shift cache one to the left - for (p = 0; p < 3; p++) { - last4[p] = last4[p + 1]; - } - last4[3] = keycode; - - if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { - uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0}; - ang_tap (codes); - register_code (KC_RSFT); - register_code (KC_EQL); - unregister_code (KC_EQL); - unregister_code (KC_RSFT); - - uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0}; - ang_tap (codes2); - - return false; - } - } - - return true; -} + +/* Layers */ + +enum { + BASE = 0, + ADORE, + ARRW, + APPSEL, + HUN, + NMDIA, + PLVR, +}; + +/* Macros */ + +enum { + NONE = 0, + // Buttons that do extra stuff + A_GUI, + A_PLVR, + A_ESC, + A_MPN, + + // Function / number keys + KF_1, // 1, F1 + KF_2, // 2, F2 + KF_3, // ... + KF_4, + KF_5, + KF_6, + KF_7, + KF_8, + KF_9, + KF_10, + KF_11, // =, F11 + + // Application select keys + APP_SLK, // Slack + APP_EMCS, // Emacs + APP_TERM, // Terminal + APP_CHRM, // Chrome + APP_MSIC, // Music + + // Diagonal mouse movement + A_MUL, + A_MUR, + A_MDL, + A_MDR, + + // Hungarian layer keys + HU_AA, // Á + HU_OO, // Ó + HU_EE, // É + HU_UU, // Ú + HU_II, // Í + HU_OE, // Ö + HU_UE, // Ü + HU_OEE, // Ő + HU_UEE, // Ű +}; + +/* Fn keys */ + +enum { + F_BSE = 0, + F_HUN, + F_GUI, + F_SFT, + F_ALT, + F_CTRL +}; + +/* Custom keycodes */ + +enum { + CT_CLN = 0, + CT_MNS, + CT_TA, + CT_LBP, + CT_RBP +}; + +/* States & timers */ + +uint16_t gui_timer = 0; + +uint16_t kf_timers[12]; + +#if KEYLOGGER_ENABLE +bool log_enable = false; +#endif + +bool time_travel = false; + +/* The Keymap */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Base Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | ~ | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | + * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| + * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | : | | - | | | | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | LAlt | GUI | | MDIA | Del | + * ,------|------|------| |------+------+------. + * | | | Ctrl | | LEAD | | | + * |Backsp|LShift|------| |------| Enter| Space| + * | | | ESC | | HUN | | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( +// left hand + M(A_MPN) ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) +,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I +,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) + + ,F(F_ALT),F(F_GUI) + ,F(F_CTRL) + ,KC_BSPC,F(F_SFT),M(A_ESC) + + // right hand + ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS + ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL + ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP + ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,OSL(NMDIA),KC_DEL + ,KC_LEAD + ,F(F_HUN) ,KC_ENT ,KC_SPC + ), + +/* Keymap 1: Adore layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | `~ | X | W | K | L | M | ( | | ) | F | H | C | P | Y | \ | + * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| + * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | Z | Q | ' | , | . | : | | - | B | G | V | J | / | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | LAlt | GUI | | MDIA | Del | + * ,------|------|------| |------+------+------. + * | | | Ctrl | | HUN | | | + * |Backsp|LShift|------| |------| Enter| Space| + * | | | ESC | | LEAD | | | + * `--------------------' `--------------------' + */ +[ADORE] = KEYMAP( +// left hand + KC_MPLY ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) +,KC_GRV ,KC_X ,KC_W ,KC_K ,KC_L ,KC_M ,TD(CT_LBP) +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U +,KC_NO ,KC_Z ,KC_Q ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN) +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,F(F_ALT),F(F_GUI) + ,F(F_CTRL) + ,KC_BSPC,F(F_SFT),M(A_ESC) + + // right hand + ,KC_APP ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS + ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL + ,TD(CT_MNS),KC_B ,KC_G ,KC_V ,KC_J ,KC_SLSH ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,OSL(NMDIA),KC_DEL + ,F(F_HUN) + ,KC_LEAD ,KC_ENT ,KC_SPC + ), + +/* Keymap 2: Arrow layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | Home | Up | End | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | Left | Down | Rght | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | Enter| |------| |------| PgUp | PgDn | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[ARRW] = KEYMAP( +// left hand + KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_ENT ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_PGUP ,KC_PGDN + ), + +/* Keymap 3: Application select layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[APPSEL] = KEYMAP( +// left hand + KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + ), + + +/* Keymap 4: Hungarian Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | Ő | | Ű | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | Á | Ó | É | Ú | Í |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | Ö | | Ü | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | BASE | | | + * `--------------------' `--------------------' + */ + +[HUN] = KEYMAP( +// left hand + KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO +,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II) +,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,KC_NO ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,F(F_BSE),KC_TRNS ,KC_TRNS + ), + +/* Keymap 5: Navigation & Media layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen| + * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------| + * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | | + * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------| + * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Mute | VlUp | | BASE | MClk | + * ,------|------|------| |------+------+------. + * | | | VlDn | | Prev |Left |Right | + * | SPC | Enter|------| |------| Click| Click| + * | | | ESC | | Next | | | + * `--------------------' `--------------------' + */ +[NMDIA] = KEYMAP( +// left hand + KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) +,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO +,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO +,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_MUTE ,KC_VOLU + ,KC_VOLD + ,KC_SPC,KC_ENTER,M(A_ESC) + + // right hand + ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR + ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO + ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_TRNS ,KC_MS_BTN3 + ,KC_MPRV + ,KC_MNXT ,KC_BTN1 ,KC_BTN2 + ), + +/* Keymap 6: Steno for Plover + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | BASE | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | # | | # | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | T | P | H | |------| |------| | F | P | L | T | D | + * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------| + * | | | K | W | R | | | | | | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[PLVR] = KEYMAP( +// left hand +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR), +KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, +KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, +KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + PV_A, PV_O, KC_NO, + + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, + PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, + PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO,PV_E, PV_U + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS) + ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS) + ,[F_GUI] = ACTION_MACRO_TAP(A_GUI) + ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) + ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) + ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) +}; + +void toggle_steno(int pressed) +{ + uint8_t layer = biton32(layer_state); + + if (pressed) { + if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR); + + register_code(PV_LP); + register_code(PV_LH); + register_code(PV_LR); + register_code(PV_O); + register_code(PV_RL); + register_code(PV_RG); + } else { + unregister_code(PV_LP); + unregister_code(PV_LH); + unregister_code(PV_LR); + unregister_code(PV_O); + unregister_code(PV_RL); + unregister_code(PV_RG); + } +} + +macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) +{ + uint8_t need_shift = 0; + uint8_t hold_shift = 0; + + if (!record->event.pressed) + return MACRO_NONE; + + layer_off (HUN); + + if (keyboard_report->mods & MOD_BIT (KC_LSFT)) { + hold_shift = 1; + need_shift = 1; + unregister_code (KC_LSFT); + } + if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) { + need_shift = 1; + hold_shift = 0; + unregister_code (KC_LSFT); + } + + clear_oneshot_mods (); + + register_code (KC_RALT); + unregister_code (KC_RALT); + if (accent == (KC_DQT)) { + register_code (KC_RSFT); + } + register_code (accent); + unregister_code (accent); + if (need_shift && accent != (KC_DQT)) { + register_code (KC_RSFT); + } else if (accent == (KC_DQT) && !need_shift) { + unregister_code (KC_RSFT); + } + register_code (hun_char); + unregister_code (hun_char); + if (need_shift || accent == (KC_DQT)) + unregister_code (KC_RSFT); + if (hold_shift) + register_code (KC_LSFT); + + return MACRO_NONE; +} + +void ang_handle_kf (keyrecord_t *record, uint8_t id) +{ + uint8_t code = id - KF_1; + + if (record->event.pressed) { + kf_timers[code] = timer_read (); + } else { + uint8_t kc; + + if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) { + // Long press + kc = KC_F1 + code; + } else { + if (id == KF_11) + kc = KC_EQL; + else + kc = KC_1 + code; + } + + register_code (kc); + unregister_code (kc); + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case A_ESC: + if (record->event.pressed) { + if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { + clear_oneshot_mods (); + } else { + register_code (KC_ESC); + } + layer_off (HUN); + } else { + unregister_code (KC_ESC); + } + break; + + case A_MPN: + if (record->event.pressed) { + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out()); + + if (oneshot) + clear_oneshot_mods (); + unregister_code (KC_LSFT); + + register_code (KC_MPRV); + unregister_code (KC_MPRV); + + if (!oneshot) + register_code (KC_LSFT); + } else { + return MACRO (T(MNXT), END); + } + } + break; + + /* Hungarian layer */ + case HU_AA: + return ang_do_hun (record, KC_QUOT, KC_A); + case HU_OO: + return ang_do_hun (record, KC_QUOT, KC_O); + case HU_EE: + return ang_do_hun (record, KC_QUOT, KC_E); + case HU_UU: + return ang_do_hun (record, KC_QUOT, KC_U); + case HU_II: + return ang_do_hun (record, KC_QUOT, KC_I); + case HU_OE: + return ang_do_hun (record, KC_DQT, KC_O); + case HU_UE: + return ang_do_hun (record, KC_DQT, KC_U); + case HU_OEE: + return ang_do_hun (record, KC_EQL, KC_O); + case HU_UEE: + return ang_do_hun (record, KC_EQL, KC_U); + + /* Mouse movement */ + case A_MUL: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MUR: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + case A_MDL: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MDR: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + /* Plover base */ + case A_PLVR: + toggle_steno(record->event.pressed); + break; + + /* GUI & AppSel */ + case A_GUI: + if (record->event.pressed) { + register_code (KC_LGUI); + if (record->tap.count && !record->tap.interrupted) { + if (record->tap.count >= 2) { + register_code (KC_W); + layer_on (APPSEL); + set_oneshot_layer (APPSEL, ONESHOT_START); + } + } else { + record->tap.count = 0; + } + gui_timer = 0; + } else { + if (record->tap.count >= 2) + { + unregister_code (KC_W); + clear_oneshot_layer_state (ONESHOT_PRESSED); + } + gui_timer = timer_read (); + } + break; + + case APP_SLK: + return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); + + case APP_EMCS: + return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END); + + case APP_TERM: + return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END); + + case APP_CHRM: + return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); + + case APP_MSIC: + return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); + + /* Function keys */ + case KF_1 ... KF_11: + ang_handle_kf (record, id); + break; + } + + return MACRO_NONE; +}; + +uint8_t is_adore = 0; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + uint8_t dl; + + ergodox_led_all_on(); + for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { + ergodox_led_all_set (i); + wait_ms (5); + } + wait_ms(1000); + for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { + ergodox_led_all_set (i); + wait_ms (10); + } + ergodox_led_all_off(); + + if (!eeconfig_is_enabled()) + eeconfig_init(); + dl = eeconfig_read_default_layer (); + if (dl == (1UL << ADORE)) { + is_adore = 1; +#if ADORE_AUTOLOG + log_enable = true; +#endif + } +}; + +LEADER_EXTERNS(); + +void ang_do_unicode (void) { + register_code (KC_RCTL); + register_code (KC_RSFT); + register_code (KC_U); + unregister_code (KC_U); + unregister_code (KC_RSFT); + unregister_code (KC_RCTL); + wait_ms (100); +} + +void ang_tap (uint16_t codes[]) { + for (int i = 0; codes[i] != 0; i++) { + register_code (codes[i]); + unregister_code (codes[i]); + wait_ms (50); + } +} + +#define TAP_ONCE(code) \ + register_code (code); \ + unregister_code (code) + +void ang_tap_dance_bp_finished (qk_tap_dance_state_t *state, void *user_data) { + bool left, parens; + + if (state->count > 2) { + state->count = 0; + return; + } + + if (state->keycode == TD(CT_LBP)) + left = true; + else + left = false; + + if (state->count == 1) + parens = false; + else + parens = true; + + if (parens) { + register_code (KC_RSFT); + if (left) { + TAP_ONCE(KC_9); + } else { + TAP_ONCE(KC_0); + } + unregister_code (KC_RSFT); + } else { + if (left) { + TAP_ONCE (KC_LBRC); + } else { + TAP_ONCE (KC_RBRC); + } + } +} + +void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code (KC_RSFT); + register_code (KC_SCLN); + } else if (state->count == 2) { + register_code (KC_SCLN); + } +} + +void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code (KC_SCLN); + unregister_code (KC_RSFT); + } else if (state->count == 2) { + unregister_code (KC_SCLN); + } +} + +void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code (KC_MINS); + } else if (state->count == 2) { + register_code (KC_RSFT); + register_code (KC_MINS); + } +} + +void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code (KC_MINS); + } else if (state->count == 2) { + unregister_code (KC_RSFT); + unregister_code (KC_MINS); + } +} + +typedef struct { + bool layer_toggle; + bool sticky; + bool finished_once; +} td_ta_state_t; + +void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { + td_ta_state_t *td_ta = (td_ta_state_t *) user_data; + + if (td_ta->finished_once) { + return; + } + + if (td_ta->sticky) { + td_ta->sticky = false; + td_ta->layer_toggle = false; + layer_off (ARRW); + return; + } + + td_ta->finished_once = true; + if (state->count == 1 && !state->pressed) { + register_code (KC_TAB); + td_ta->sticky = false; + td_ta->layer_toggle = false; + } else { + td_ta->layer_toggle = true; + layer_on (ARRW); + td_ta->sticky = (state->count == 2); + } +} + +void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { + td_ta_state_t *td_ta = (td_ta_state_t *) user_data; + + if (!td_ta->layer_toggle) + unregister_code (KC_TAB); + if (!td_ta->sticky) + layer_off (ARRW); + + td_ta->finished_once = false; +} + +const qk_tap_dance_action_t tap_dance_actions[] = { + [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) + ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) + ,[CT_TA] = { + .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, + .user_data = (void *)&((td_ta_state_t) { false, false, false }) + } + ,[CT_LBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) + ,[CT_RBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) +}; + +static uint16_t uni[32]; +static uint8_t unicnt; +static bool unimagic = false; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) + unregister_code (KC_LGUI); + + if (layer == HUN) { + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + } else if (layer == NMDIA) { + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + } else if (layer == PLVR) { + ergodox_right_led_1_on (); + ergodox_right_led_2_on (); + ergodox_right_led_3_on (); + } else if (layer == ADORE) { + ergodox_right_led_1_on (); + ergodox_right_led_2_on (); + ergodox_right_led_3_on (); + + ergodox_right_led_2_set (LED_BRIGHTNESS_HI); + } + + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_1_set (LED_BRIGHTNESS_HI); + ergodox_right_led_1_on (); + } else { + ergodox_right_led_1_set (LED_BRIGHTNESS_LO); + if (layer != NMDIA && layer != PLVR && layer != ADORE) + ergodox_right_led_1_off (); + } + + if (keyboard_report->mods & MOD_BIT(KC_LALT) || + ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_2_set (LED_BRIGHTNESS_HI); + ergodox_right_led_2_on (); + } else { + ergodox_right_led_2_set (LED_BRIGHTNESS_LO); + if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE) + ergodox_right_led_2_off (); + } + + if (keyboard_report->mods & MOD_BIT(KC_LCTRL) || + ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_3_set (LED_BRIGHTNESS_HI); + ergodox_right_led_3_on (); + } else { + ergodox_right_led_3_set (LED_BRIGHTNESS_LO); + if (layer != HUN && layer != PLVR && layer != ADORE) + ergodox_right_led_3_off (); + } + + LEADER_DICTIONARY() { + leading = false; + leader_end (); + +#if KEYLOGGER_ENABLE + SEQ_ONE_KEY (KC_D) { + ergodox_led_all_on(); + wait_ms(100); + ergodox_led_all_off(); + log_enable = !log_enable; + } +#endif + + SEQ_ONE_KEY (KC_T) { + time_travel = !time_travel; + } + + SEQ_ONE_KEY (KC_U) { + ang_do_unicode (); + } + + SEQ_TWO_KEYS (KC_LEAD, KC_U) { + unicnt = 0; + unimagic = true; + register_code(KC_RSFT); + TAP_ONCE(KC_U); + unregister_code(KC_RSFT); + } + + SEQ_ONE_KEY (KC_V) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")"); + } + + SEQ_ONE_KEY (KC_L) { + /* λ */ + ang_do_unicode (); + + uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0}; + ang_tap (codes); + } + + SEQ_ONE_KEY (KC_Y) { + uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0}; + ang_tap (codes); + } + + SEQ_ONE_KEY (KC_S) { + ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + TAP_ONCE (KC_BSLS); + register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); + ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC); + register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); + TAP_ONCE (KC_SLSH); + ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + } + + SEQ_TWO_KEYS (KC_W, KC_M) { + register_code (KC_LALT); + register_code (KC_F2); + unregister_code (KC_F2); + unregister_code (KC_LALT); + + wait_ms (1000); + + uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; + ang_tap (codes); + register_code (KC_LGUI); + register_code (KC_UP); + unregister_code (KC_UP); + unregister_code (KC_LGUI); + } + + SEQ_ONE_KEY (KC_A) { + if (is_adore == 0) { + default_layer_and (0); + default_layer_or ((1UL << ADORE)); + eeconfig_update_default_layer ((1UL << ADORE)); + is_adore = 1; + + ergodox_led_all_off (); + ergodox_right_led_3_on (); + wait_ms (100); + ergodox_right_led_2_on (); + wait_ms (100); + ergodox_right_led_3_off (); + ergodox_right_led_1_on (); + wait_ms (100); + ergodox_right_led_2_off (); + wait_ms (100); + ergodox_right_led_1_off (); +#if ADORE_AUTOLOG + log_enable = true; +#endif + } else { +#if ADORE_AUTOLOG + log_enable = false; +#endif + is_adore = 0; + default_layer_and (0); + default_layer_or (1UL << BASE); + eeconfig_update_default_layer ((1UL << BASE)); + + ergodox_led_all_off (); + ergodox_right_led_1_on (); + wait_ms (100); + ergodox_right_led_2_on (); + wait_ms (100); + ergodox_right_led_1_off (); + ergodox_right_led_3_on (); + wait_ms (100); + ergodox_right_led_2_off (); + wait_ms (100); + ergodox_right_led_3_off (); + } + } + } +} + +static uint16_t last4[4]; + +bool is_uni_seq(char *seq) { + uint8_t i; + + for (i = 0; seq[i]; i++) { + uint16_t code; + if (('1' <= seq[i]) && (seq[i] <= '9')) + code = seq[i] - '1' + KC_1; + else if (seq[i] == '0') + code = KC_0; + else + code = seq[i] - 'a' + KC_A; + + if (i > unicnt) + return false; + if (uni[i] != code) + return false; + } + + if (uni[i] == KC_ENT || uni[i] == KC_SPC) + return true; + + return false; +} + +uint16_t hex_to_keycode(uint8_t hex) +{ + if (hex == 0x0) { + return KC_0; + } else if (hex < 0xA) { + return KC_1 + (hex - 0x1); + } else { + return KC_A + (hex - 0xA); + } +} + +void register_hex(uint16_t hex) { + bool leading_zeros = true; + + for(int i = 3; i >= 0; i--) { + uint8_t digit = ((hex >> (i*4)) & 0xF); + if (digit != 0) + leading_zeros = false; + else if (leading_zeros) + continue; + register_code(hex_to_keycode(digit)); + unregister_code(hex_to_keycode(digit)); + wait_ms(10); + } +} + +typedef struct { + char *symbol; + uint16_t codes[4]; +} qk_ucis_symbol_t; + +static qk_ucis_symbol_t ucis_symbol_table[] = { + {"poop", {0x1, 0xf4a9, 0}}, + {"rofl", {0x1, 0xf923, 0}}, + {"kiss", {0x1, 0xf619, 0}}, + {"snowman", {0x2603, 0}}, + {NULL, {}} +}; + +bool process_record_ucis (uint16_t keycode, keyrecord_t *record) { + uint8_t i; + + if (!unimagic) + return true; + + if (!record->event.pressed) + return true; + + uni[unicnt] = keycode; + unicnt++; + + if (keycode == KC_BSPC) { + if (unicnt >= 2) { + unicnt-= 2; + return true; + } else { + unicnt--; + return false; + } + } + + if (keycode == KC_ENT || keycode == KC_SPC) { + bool symbol_found = false; + + for (i = unicnt; i > 0; i--) { + register_code (KC_BSPC); + unregister_code (KC_BSPC); + wait_ms(10); + } + + ang_do_unicode(); + wait_ms(10); + for (i = 0; ucis_symbol_table[i].symbol; i++) { + if (is_uni_seq (ucis_symbol_table[i].symbol)) { + symbol_found = true; + for (uint8_t j = 0; ucis_symbol_table[i].codes[j]; j++) { + register_hex(ucis_symbol_table[i].codes[j]); + } + break; + } + } + if (!symbol_found) { + for (i = 0; i < unicnt - 1; i++) { + uint8_t code; + + if (uni[i] > KF_1) + code = uni[i] - KF_1 + KC_1; + else + code = uni[i]; + TAP_ONCE(code); + wait_ms (10); + } + } + + unimagic = false; + return true; + } + return true; +} + +bool process_record_user (uint16_t keycode, keyrecord_t *record) { +#if KEYLOGGER_ENABLE + if (log_enable) { + xprintf ("KL: col=%d, row=%d\n", record->event.key.col, + record->event.key.row); + } +#endif + + if (!process_record_ucis (keycode, record)) + return false; + + if (time_travel && !record->event.pressed) { + uint8_t p; + + // shift cache one to the left + for (p = 0; p < 3; p++) { + last4[p] = last4[p + 1]; + } + last4[3] = keycode; + + if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { + uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0}; + ang_tap (codes); + register_code (KC_RSFT); + register_code (KC_EQL); + unregister_code (KC_EQL); + unregister_code (KC_RSFT); + + uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0}; + ang_tap (codes2); + + return false; + } + } + + return true; +} diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 6fe177511..26dfddbe6 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -16,11 +16,12 @@ Some of the things in the layout only work when one uses Spacemacs and GNOME und - [ADORE layer](#adore-layer) - [Hungarian layer](#hungarian-layer) - [Navigation and media layer](#navigation-and-media-layer) - - [One-handed layer](#one-handed-layer) - [Steno layer](#steno-layer) - [LED states](#led-states) * [Tools](#tools) - [Heatmap](#heatmap) +* [Special features](#special-features) + - [Unicode Symbol Input](#unicode-symbol-input) * [Building](#building) - [Using on Windows](#using-on-windows) * [Changelog](#changelog) @@ -38,7 +39,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest * The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap. * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. -* The **Media** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** keys are toggles. +* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle. * When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key. * Tapping the `:` key once yields `:`, tapping it twice yields `;`. * The **Lead** key allows me to type in a sequence of keys, and trigger some actions: @@ -51,6 +52,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest - `LEAD v` prints the firmware version, the keyboard and the keymap. - `LEAD d` toggles logging keypress positions to the HID console. - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. + - `LEAD LEAD u` enters the [Unicode symbol input][#unicode-symbol-input] mode. ## ADORE layer @@ -74,20 +76,6 @@ On this layer, the accented characters are at the same position as their base va This layer is primarily for navigating with the cursor or the mouse, and some media things. -## One-handed layer - -[![One-handed layer](images/one-handed-layer.png)](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece) - -The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the `OTHER` key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half. - -The differences are as follows: - -* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier to tap. -* Most keys on the thumb cluster now have dual uses, and these do not change when switching sides: - - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held for longer than a normal tap. - - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap. -* The `Apps`/`BASE` key can be used to go back to the base layer, by long-tapping it. A short-tap will send the `App` key, as usual. - ## Steno layer [![Steno layer for Plover](images/steno-layer.png)](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667) @@ -103,11 +91,25 @@ For the layers, the following rules apply: * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. -* When the [One-handed layer](#one-handed-layer) is active, the *green* LED is on and bright, and either the *red* or the *blue* one is going to slowly blink, depending on the currently active side. * For the [Steno layer](#steno-layer), all LEDs will be turned on. Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. +# Special features + +## Unicode Symbol Input + +Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes. + +The currently supported symbols are: + +- `snowman`: ☃ +- `kiss`: 😙 +- `rofl`: 🤣 +- `poop`: 💩 + +This is an experimental feature, and may or may not work reliably. + # Tools ## Heatmap @@ -133,14 +135,14 @@ To make my workflow easier, this layout is maintained in [its own repository][al $ git clone https://github.com/jackhumbert/qmk_firmware.git $ cd qmk_firmware $ git clone https://github.com/algernon/ergodox-layout.git \ - keyboards/ergodox_ez/keymaps/algernon-master -$ make KEYBOARD=ergodox_ez KEYMAP=algernon-master + keyboards/ergodox/keymaps/algernon-master +$ make keyboard=ergodox keymap=algernon-master ``` From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware): ``` -$ make KEYBOARD=ergodox_ez KEYMAP=algernon +$ make keyboard=ergodox keymap=algernon ``` ## Using on Windows @@ -149,6 +151,16 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the # Changelog +## v1.5 - 2016-08-12 + +* The **1HAND** layer has been removed. +* A `Delete` key is now available on the right thumb cluster. +* The [ADORE](#adore-layer) layer received a major update, see the layout image above. +* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default. +* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer). +* On the **ARROW** layer, `Backspace` has been replaced by `Enter`. +* There is some experimental support for entering Unicode symbols. + ## v1.4 - 2016-07-29 * When toggling the key logging on or off, the LEDs will do a little dance. -- cgit v1.2.3 From ba7f2b1d3f350b72236a19440ec7026fa0cfd2ba Mon Sep 17 00:00:00 2001 From: Nicholas Keene Date: Sat, 13 Aug 2016 15:53:03 -0500 Subject: The Ordinary Layout is the unsurprising layout --- keyboards/ergodox/keymaps/ordinary/keymap.c | 241 +++++++++------------ .../ergodox/keymaps/ordinary/ordinary-base.png | Bin 99605 -> 76549 bytes .../ergodox/keymaps/ordinary/ordinary-base.txt | 16 +- .../ergodox/keymaps/ordinary/ordinary-media.png | Bin 124144 -> 96205 bytes .../ergodox/keymaps/ordinary/ordinary-media.txt | 36 +-- .../ergodox/keymaps/ordinary/ordinary-special.png | Bin 63065 -> 68418 bytes .../ergodox/keymaps/ordinary/ordinary-special.txt | 20 +- .../ergodox/keymaps/ordinary/ordinary-symbol.png | Bin 103735 -> 73009 bytes .../ergodox/keymaps/ordinary/ordinary-symbol.txt | 20 +- keyboards/ergodox/keymaps/ordinary/readme.md | 8 +- 10 files changed, 158 insertions(+), 183 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c index bf0574ea2..eda45b7cb 100644 --- a/keyboards/ergodox/keymaps/ordinary/keymap.c +++ b/keyboards/ergodox/keymaps/ordinary/keymap.c @@ -1,23 +1,20 @@ -#include "ergodox.h" +#include "ergodox_ez.h" #include "led.h" #include "debug.h" #include "action_layer.h" #include "action_util.h" -#include "mousekey.h" #define BASE 0 // default layer #define SYMB 1 // symbols layer #define MDIA 2 // media layer #define SPEC 3 // special layer -#define LCaps 10 // left caps-shift key -#define LSymb 11 // left symbol-shift key -#define LMdia 12 // left media-shift key -#define LSpec 13 // left special-shift key -#define RCaps 14 // right caps-shift key -#define RSymb 15 // right symbol-shift key -#define RMdia 16 // right media-shift key -#define RSpec 17 // right special-shift key +#define LSymb 10 // left symbol-shift key +#define LMdia 11 // left media-shift key +#define LSpec 12 // left special-shift key +#define RSymb 13 // right symbol-shift key +#define RMdia 14 // right media-shift key +#define RSpec 15 // right special-shift key #define MUL 20 // mouse up left #define MUR 21 // mouse up right @@ -25,13 +22,14 @@ #define MDR 23 // mouse down right /* - * The Ordinary Layout for the Ergodox EZ keyboard, v4 - * + * The Ordinary Layout for the Ergodox EZ keyboard, v4.20 + * * Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com * * No rights reserved. This software is in the public domain. * Credit me if you are friendly but if you're a jerk don't bother. - * + * If you use or modify this layout I would love to hear from you. + * * Details: readme.md * https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary */ @@ -61,10 +59,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = KEYMAP( // left hand - F(LSpec),KC_1,KC_2,KC_3 ,KC_4 ,KC_5 ,KC_ESC + F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC ,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC ,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G -,M(LCaps) ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) +,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) ,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT,KC_LGUI ,KC_HOME,KC_END ,KC_PGUP @@ -73,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) - ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,M(RCaps) + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL ,KC_LEFT ,KC_RGHT ,KC_UP @@ -91,8 +89,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | LCtrl | Meh |Hyper | LAlt | LGui | |RGui/0|RAlt/.|Hypr/=|Meh/+ |RCtrl/Ent| - * `-----------------------------------' `-------------------------------------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | 0 | . | = | + | Ent | + * `-----------------------------------' `-----------------------------------' * ,-------------. ,-------------. * | Left | Right| | Home | End | * ,------|------|------| |------+------+------. @@ -105,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // left hand KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC ,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) -,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV +,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB ,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT ,KC_LGUI ,KC_LEFT ,KC_RGHT @@ -116,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS - ,GUI_T(KC_0),ALT_T(KC_DOT),ALL_T(KC_EQL),MEH_T(KC_PLUS),CTL_T(KC_ENT) + ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT ,KC_HOME ,KC_END ,KC_PGUP ,KC_PGDN ,KC_BSPC ,KC_DEL @@ -124,24 +122,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /******* Media Layer ******************************************************************************************************* * - * ,---------------------------------------------------------------. ,---------------------------------------------------------------. - * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | - * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| - * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | - * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| - * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | - * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| - * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | - * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' - * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| - * `---------------------------------------------' `---------------------------------------------' - * ,-------------. ,-------------. - * | Stop |Refrsh| | Prev | Next | - * ,------|------|------| |------+------+------. - * |Brwser|Brwser|Search| |VolUp | | | - * |Back | Fwd |------| |------| Stop | Play-| - * | | | Home | |VolDn | | Pause| - * `--------------------' `--------------------' + * ,---------------------------------------------------------------. ,---------------------------------------------------------------. + * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | + * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| + * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | + * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| + * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | + * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| + * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | + * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' + * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| + * `---------------------------------------------' `---------------------------------------------' + * ,-------------. ,-------------. + * | Stop |Refrsh| | Prev | Next | + * ,------|------|------| |------+------+------. + * |Brwser|Brwser|Search| |VolUp | | | + * |Back | Fwd |------| |------| Stop | Play-| + * | | | Home | |VolDn | | Pause| + * `--------------------' `--------------------' */ [MDIA] = KEYMAP( // left hand @@ -166,67 +164,63 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /******* Special Layer ***************************************************************************************************** * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | Esc | | | | | | | | | | | | Bspc | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | RShift | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' + * ,-------------------------------------------------------. ,-------------------------------------------------------. + * | | Esc | | | | | | | | | | | - | Bspc | | + * |-------------+------+------+------+------+-------------| |------+------+------+------+------+------+-------------| + * | Media Lock | | | | | | | | | | | | [ | ] | Media Lock | + * |-------------+------+------+------+------+------| | | |------+------+------+------+------+-------------| + * | Symbol Lock | | | | | |------| |------| | | | | | Symbol Lock | + * |-------------+------+------+------+------+------| | | |------+------+------+------+------+-------------| + * | Caps Lock | | | | | | | | | | | | | | Caps Lock | + * `-------------+------+------+------+------+-------------' `-------------+------+------+------+------+-------------' + * | | | | | | | | | | | | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' */ [SPEC] = KEYMAP( // left hand KC_TRNS ,KC_ESC ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_CAPS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS,KC_TRNS ,KC_TRNS - // right hand - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_BSPC ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_RSFT - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_MINS ,KC_BSPC ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_LBRC ,KC_RBRC ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_CAPS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ) }; const uint16_t PROGMEM fn_actions[] = { // the faux shift keys are implemented as macro taps - [LCaps] = ACTION_MACRO_TAP(LCaps) - ,[LSymb] = ACTION_MACRO_TAP(LSymb) + [LSymb] = ACTION_MACRO_TAP(LSymb) ,[LMdia] = ACTION_MACRO_TAP(LMdia) ,[LSpec] = ACTION_MACRO_TAP(LSpec) - ,[RCaps] = ACTION_MACRO_TAP(RCaps) ,[RSymb] = ACTION_MACRO_TAP(RSymb) ,[RMdia] = ACTION_MACRO_TAP(RMdia) ,[RSpec] = ACTION_MACRO_TAP(RSpec) }; -uint16_t caps_shift = 0; uint16_t symb_shift = 0; uint16_t mdia_shift = 0; +uint16_t spec_shift = 0; -bool symb_lock = false; bool mdia_lock = false; +bool symb_lock = false; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { @@ -237,50 +231,28 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // only because sometimes rapid pressing led to irregular events; this way the states // are self healing during use. - case LCaps: // both caps-shift keys trigger Left Shift - case RCaps: // so they don't interfere with the magic combo - if (record->event.pressed && !record->tap.count) { - if(++caps_shift > 2) caps_shift = 2; - if(caps_shift == 2) { - register_code(KC_CAPS); - unregister_code(KC_CAPS); - } else if(caps_shift == 1) { - register_code(KC_LSFT); - } - } else { - if(--caps_shift < 0) caps_shift = 0; - if(caps_shift == 0) unregister_code(KC_LSFT); - } - break; - - case LSymb: - if (record->event.pressed) { - if(++symb_shift > 2) symb_shift = 2; - if(symb_shift == 2) { - symb_lock = !symb_lock; - } else if(symb_shift == 1) { - layer_on(SYMB); - } - } else { - if(--symb_shift < 0) symb_shift = 0; - if((symb_shift == 0) && (!symb_lock)) layer_off(SYMB); + case LSymb: // + if (record->event.pressed) { // when the LSymb button is pressed + if(++symb_shift > 2) mdia_shift = 2; // increment the symb shift count, max two + if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock + layer_on(SYMB); // in any case, turn on the Symbols layer + } else { // when the LSymb button is released + if(--symb_shift < 0) symb_shift = 0; // decrement the shift count, minimum zero + if((!symb_shift) && (!symb_lock)) layer_off(SYMB); // if both shifts are released and the lock is off, turn off the Symbols layer } break; case LMdia: if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { register_code(KC_TAB); } else { + if(spec_shift) mdia_lock = !mdia_lock; if(++mdia_shift > 2) mdia_shift = 2; - if(mdia_shift == 2) { - mdia_lock = !mdia_lock; - } else if(mdia_shift == 1) { - layer_on(MDIA); - } + layer_on(MDIA); } } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { unregister_code(KC_TAB); } else { if(--mdia_shift < 0) mdia_shift = 0; @@ -290,35 +262,36 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) break; case LSpec: - if (record->event.pressed) { - if (record->tap.count && !record->tap.interrupted) { - register_code(KC_GRV); + if (record->event.pressed) { // when the LSpec button is pressed + if(symb_shift) symb_lock == !symb_lock; // if another layer button is engaged, then + else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia + else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { + register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char } else { - layer_on(SPEC); + if(++spec_shift > 2) spec_shift = 2; + layer_on(SPEC); // otherwise, turn on the Special layer } } else { - if(record->tap.count && !record->tap.interrupted) { + if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { unregister_code(KC_GRV); } else { - layer_off(SPEC); + if(--spec_shift < 0) spec_shift = 0; + if(!spec_shift) layer_off(SPEC); } } break; case RSymb: if (record->event.pressed) { - if (record->tap.count && (!symb_shift) && (!symb_lock)) { + if (record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { register_code(KC_QUOT); } else { if(++symb_shift > 2) symb_shift = 2; - if(symb_shift == 2) { - symb_lock = !symb_lock; - } else if(symb_shift == 1) { - layer_on(SYMB); - } + if(spec_shift) symb_lock = !symb_lock; + layer_on(SYMB); } } else { - if(record->tap.count && symb_shift == 0) { + if(record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { unregister_code(KC_QUOT); } else { if(--symb_shift < 0) symb_shift = 0; @@ -329,18 +302,15 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case RMdia: if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { register_code(KC_BSLS); } else { if(++mdia_shift > 2) mdia_shift = 2; - if(mdia_shift == 2) { - mdia_lock = !mdia_lock; - } else if(mdia_shift == 1) { - layer_on(MDIA); - } + if(spec_shift) mdia_lock = !mdia_lock; + layer_on(MDIA); } } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { unregister_code(KC_BSLS); } else { if(--mdia_shift < 0) mdia_shift = 0; @@ -351,16 +321,20 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case RSpec: if (record->event.pressed) { - if (record->tap.count && !record->tap.interrupted) { + if(symb_shift) symb_lock = !symb_lock; + else if(mdia_shift) mdia_lock = !mdia_lock; + else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { register_code(KC_EQL); } else { + if(++spec_shift > 2) spec_shift = 2; layer_on(SPEC); } } else { - if(record->tap.count && !record->tap.interrupted) { + if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { unregister_code(KC_EQL); } else { - layer_off(SPEC); + if(--spec_shift < 0) spec_shift = 0; + if(!spec_shift) layer_off(SPEC); } } break; @@ -419,7 +393,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // none break; } - + return MACRO_NONE; }; @@ -431,7 +405,9 @@ void matrix_init_user(void) { // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if(caps_shift || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<mods & MOD_BIT(KC_LSFT)) + || (keyboard_report->mods & MOD_BIT(KC_RSFT)) + || (host_keyboard_leds() & (1<\n\n\nTab"], +[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A",{x:14.5},":\n;",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], [{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"], [{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."], [{y:-0.875,x:5.5},"B",{x:6.5},"N"], -[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc"},"Z",{x:14.5},"?\n/",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"], +[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Z",{x:14.5},"?\n/",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"], [{y:-0.875,x:2.5},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5},"Cmd\n\n\nSuper",{x:1},"Hyper"], [{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Ctrl\n\n\nRCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Home","End"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Home","End"], [{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete","Page\n\n\n\n\n\nUp"], [{x:2},"Page\n\n\n\n\n\nDown"], [{r:-30,rx:13,y:-1,x:-3},"Left","Right"], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png index 99e5ed80b..bb78b7c7a 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt index 4eccc9f35..e1467b22e 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt @@ -1,27 +1,27 @@ [{x:3.5,c:"#99de2a"},"F13",{x:10.5},"F18"], [{y:-0.875,x:2.5},"F12",{x:1},"F14",{x:8.5},"F17",{x:1},"F19"], [{y:-0.875,x:5.5},"F15",{c:"#ff4444"},"Esc",{x:4.5,c:"#737373",a:7},"",{c:"#99de2a",a:4},"F16"], -[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"], -[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#ffb063"},"Home",{x:1},"Page\n\n\n\n\n\nUp"], -[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#e6e067"},"Print\n\n\n\n\n\nScreen"], -[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#e6e067",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#ff0000",w:1.5},"\n\nMedia\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#ff8500",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], +[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#1e8fff"},"Home",{x:1},"Page\n\n\n\n\n\nUp"], +[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#1e8fff",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#9977ee"},"Print\n\n\n\n\n\nScreen"], +[{y:-0.875,c:"#000000",t:"#3f68ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#3f68ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], [{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nLeft",{x:1},"Mouse\n\n\n\n\n\nRight",{x:8.5},"Cursor\n\n\n\n\n\nLeft",{x:1},"Cursor\n\n\n\n\n\nRight"], -[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"], -[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#e6e067"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#2277ff",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"], -[{y:-0.75,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], -[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#ffb063"},"End",{x:1},"Page\n\n\n\n\n\nDown"], -[{y:-0.875,x:5.5,c:"#e6e067"},"Mute",{x:6.5,c:"#737373",a:7},""], -[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#ff8500"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#ffb063",fa:[0,0,0,1]},"Delete\n\n\nOption"], -[{y:-0.875,x:2.5,c:"#ff8500"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#ffb063"},"Insert\n\n\nCmd",{x:1,c:"#77aaff"},"Hyper"], +[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"], +[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#c6c600",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#1e8fff",t:"#000000",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"], +[{y:-0.75,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"], +[{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""], +[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff",fa:[0,0,0,1]},"Delete\n\n\nOption"], +[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert\n\n\nCmd",{x:1,c:"#dddd77"},"Hyper"], [{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Crtl\n\n\nRCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ccbb00"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], [{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"], [{x:2},"Home\n\n\nBrowser"], [{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"], -[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ccbb00",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"], -[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nDown"] +[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#6633ee",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"], +[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nDown"] diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png index 6eecf447e..399c5fc75 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt index a08827c6d..6f9d8ef04 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt @@ -1,21 +1,21 @@ [{x:3.5,a:7},"",{x:10.5},""], -[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], -[{y:-0.875,x:5.5},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"_\n\n\n\n\n\n-"], +[{y:-0.875,x:5.5,a:7},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], [{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], -[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], -[{y:-0.875,x:5.5},"",{h:1.5},"",{x:4.5,h:1.5},"",""], -[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], -[{y:-0.375,x:3.5},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"{\n["], +[{y:-0.875,x:5.5,a:7},"",{h:1.5},"",{x:4.5,h:1.5},"",""], +[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.875,x:5.5},"",{x:6.5},""], -[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], -[{y:-0.625,x:6.5,h:1.5},"",{x:4.5,h:1.5},""], +[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"], +[{y:-0.625,x:6.5,c:"#cccccc",a:7,h:1.5},"",{x:4.5,h:1.5},""], [{y:-0.75,x:3.5},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.875,x:5.5},"",{x:6.5},""], -[{y:-0.875,w:1.5},"","",{x:14.5},"",{c:"#2277ff",w:1.5},"RShift"], -[{y:-0.375,x:3.5,c:"#cccccc"},"",{x:10.5},""], +[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.75,x:0.5},"","",{x:14.5},"",""], [{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png index e4de64a96..48cda5f6b 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt index e199f5c59..5c5bc155a 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt @@ -1,24 +1,24 @@ [{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"], [{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"], [{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"], -[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.875,c:"#dddd77",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#dddd77",w:1.5},"\n\nShift\n\n\n\n\nLock"], [{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"], [{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"], [{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"], -[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb"},"!",{x:14.5,c:"#89b087"},"/",{c:"#2277ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#bbddbb"},"(",{x:10.5,c:"#89b087"},"5"], +[{y:-0.875,c:"#dddd77",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#dddd77",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"(",{x:10.5,c:"#89b087"},"5"], [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"], [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"], -[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#54d6de",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], +[{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], [{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"], [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"], [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"], -[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb"},"%",{x:14.5,c:"#89b087"},"-",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},".\n\n\nOption"], -[{y:-0.875,x:2.5,c:"#77aaff"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0\n\n\nCmd",{x:1},"=\n\n\nHyper"], -[{y:-0.75,x:0.5,c:"#77aaff"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+\n\n\nMeh","Enter\n\n\nCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Left","Right"], +[{y:-0.875,c:"#dddd77",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#dddd77",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#c6c600",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."], +[{y:-0.875,x:2.5,c:"#c6c600"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="], +[{y:-0.75,x:0.5,c:"#c6c600"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"], [{h:2},"Space",{h:2},"Enter","Up"], [{x:2},"Down"], [{r:-30,rx:13,y:-1,x:-3},"Home","End"], diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md index 6465cd79e..21d40477c 100644 --- a/keyboards/ergodox/keymaps/ordinary/readme.md +++ b/keyboards/ergodox/keymaps/ordinary/readme.md @@ -69,7 +69,7 @@ Alas, the yellow keys have at best spotty success with common software. Good luc In addition to Symbols and Media there is the Capitals layer which is exactly the same as pressing the shift key. Each layer is accessed by a shift key on each edge of the keyboard and corresponds to one of the three LEDs on the keyboard: Capitals (red), Symbols (green), Media (blue). The color of a layer illuminates when the layer is active. -Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. If you press both of a pair of shift keys, the layer will lock on until you press both shift keys again. For instance, the widely and rightly loathed Caps Lock is engaged by pressing both Capitals Shift buttons. All the Shift keys work this way. +Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button. You can press the shift and shift-lock buttons in either order. Multiple layers can be turned on at once. The Capitals layer will affect characters on other layers to capitalize. Other layers, however, don't 'mix': Symbols blankets the base layout; Media blankets Symbols. @@ -79,7 +79,7 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact ### Escape ### -The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, whnich is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. +The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. The Ordinary layout offers as a consolation prize a Special sequence for Escape: Special Shift + 1. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers. @@ -87,9 +87,9 @@ The Ordinary layout offers as a consolation prize a Special sequence for Escape: At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence, using the 0 key, to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. -### RShift ### +### Other Characters ### -The Ordinary Layout locks layers by pressing both of a pair of shift keys. This interferes with the QMK firmware magic sequence, which is LShift+RShift. To work around this, both of the Capitals Shift keys produce a *Left Shift* keystroke. If for some reason a person needs *Right Shift* they can find it by pressing a Special Shift key, then the Capitals Shift key on the right side of the keyboard. +The Escape and Backspace special sequences are so useful why not have a few more? You can find dash under 9, left bracket under o, and right bracket under p. That's pretty much all the characters from the top right corner of the keyboard which moved to make room for the columnar layout. **** -- cgit v1.2.3 From 29f64d7a93d941167c6c6e95f893ab84586b2205 Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Wed, 17 Aug 2016 13:04:50 +0200 Subject: tap-dance: Major rework, to make it more reliable This reworks how the tap-dance feature works: instead of one global state, we have a state for each tap-dance key, so we can cancel them when another tap-dance key is in flight. This fixes #527. Since we have a state for each key, we can avoid situation where a keyup would mess with our global state. This fixes #563. And while here, we also make sure to fire events only once, and this fixes #574. There is one breaking change, though: tap-dance debugging support was removed, because dumping the whole state would increase the firmware size too much. Any keymap that made use of this, will have to be updated (but there's no such keymap in the repo). Also, there's a nice trick used in this rework: we need to iterate through tap_dance_actions in a few places, to check for timeouts, and so on. For this, we'd need to know the size of the array. We can't discover that at compile-time, because tap-dance gets compiled separately. We'd like to avoid having to terminate the list with a sentinel value, because that would require updates to all keymaps that use the feature. So, we keep track of the highest tap-dance code seen so far, and iterate until that index. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/keymap.c | 2 +- keyboards/preonic/keymaps/kinesis/keymap.c | 2 +- quantum/process_keycode/process_tap_dance.c | 121 ++++++++++++++-------------- quantum/process_keycode/process_tap_dance.h | 9 ++- readme.md | 4 +- 5 files changed, 70 insertions(+), 68 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index 244bfb51f..144030e2e 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -853,7 +853,7 @@ void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { td_ta->finished_once = false; } -const qk_tap_dance_action_t tap_dance_actions[] = { +qk_tap_dance_action_t tap_dance_actions[] = { [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) ,[CT_TA] = { diff --git a/keyboards/preonic/keymaps/kinesis/keymap.c b/keyboards/preonic/keymaps/kinesis/keymap.c index 1cd6eb993..9691be91d 100644 --- a/keyboards/preonic/keymaps/kinesis/keymap.c +++ b/keyboards/preonic/keymaps/kinesis/keymap.c @@ -123,7 +123,7 @@ void music_scale_user(void) } -const qk_tap_dance_action_t tap_dance_actions[] = { +qk_tap_dance_action_t tap_dance_actions[] = { //Tap once for equal, twice for hyper + X (alfred lock) [TD_EQ_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, HYPR(KC_X)), //Tap once for minus, twice for time.heals.nothing diff --git a/quantum/process_keycode/process_tap_dance.c b/quantum/process_keycode/process_tap_dance.c index bab5c4dbd..e152f2350 100644 --- a/quantum/process_keycode/process_tap_dance.c +++ b/quantum/process_keycode/process_tap_dance.c @@ -1,19 +1,8 @@ #include "quantum.h" #include "action_tapping.h" -static qk_tap_dance_state_t qk_tap_dance_state; -bool td_debug_enable = false; - -#if CONSOLE_ENABLE -#define td_debug(s) if (td_debug_enable) \ - { \ - xprintf ("D:tap_dance:%s:%s = { keycode = %d, count = %d, active = %d, pressed = %d }\n", __FUNCTION__, s, \ - qk_tap_dance_state.keycode, qk_tap_dance_state.count, \ - qk_tap_dance_state.active, qk_tap_dance_state.pressed); \ - } -#else -#define td_debug(s) -#endif +static uint16_t last_td; +static int8_t highest_td = -1; void qk_tap_dance_pair_finished (qk_tap_dance_state_t *state, void *user_data) { qk_tap_dance_pair_t *pair = (qk_tap_dance_pair_t *)user_data; @@ -36,98 +25,110 @@ void qk_tap_dance_pair_reset (qk_tap_dance_state_t *state, void *user_data) { } static inline void _process_tap_dance_action_fn (qk_tap_dance_state_t *state, - void *user_data, - qk_tap_dance_user_fn_t fn) + void *user_data, + qk_tap_dance_user_fn_t fn) { if (fn) { fn(state, user_data); } } -static inline void process_tap_dance_action_on_each_tap (qk_tap_dance_action_t action) +static inline void process_tap_dance_action_on_each_tap (qk_tap_dance_action_t *action) { - td_debug("trigger"); - _process_tap_dance_action_fn (&qk_tap_dance_state, action.user_data, action.fn.on_each_tap); + _process_tap_dance_action_fn (&action->state, action->user_data, action->fn.on_each_tap); } -static inline void process_tap_dance_action_on_dance_finished (qk_tap_dance_action_t action) +static inline void process_tap_dance_action_on_dance_finished (qk_tap_dance_action_t *action) { - td_debug("trigger"); - _process_tap_dance_action_fn (&qk_tap_dance_state, action.user_data, action.fn.on_dance_finished); + if (action->state.finished) + return; + action->state.finished = true; + _process_tap_dance_action_fn (&action->state, action->user_data, action->fn.on_dance_finished); } -static inline void process_tap_dance_action_on_reset (qk_tap_dance_action_t action) +static inline void process_tap_dance_action_on_reset (qk_tap_dance_action_t *action) { - td_debug("trigger") - _process_tap_dance_action_fn (&qk_tap_dance_state, action.user_data, action.fn.on_reset); + _process_tap_dance_action_fn (&action->state, action->user_data, action->fn.on_reset); } bool process_tap_dance(uint16_t keycode, keyrecord_t *record) { - bool r = true; uint16_t idx = keycode - QK_TAP_DANCE; - qk_tap_dance_action_t action; + qk_tap_dance_action_t *action; + + if (last_td && last_td != keycode) { + (&tap_dance_actions[last_td - QK_TAP_DANCE])->state.interrupted = true; + } switch(keycode) { case QK_TAP_DANCE ... QK_TAP_DANCE_MAX: - action = tap_dance_actions[idx]; - - process_tap_dance_action_on_each_tap (action); - if (qk_tap_dance_state.keycode && qk_tap_dance_state.keycode != keycode) { - process_tap_dance_action_on_dance_finished (action); - } else if (qk_tap_dance_state.active && qk_tap_dance_state.pressed) { - reset_tap_dance (&qk_tap_dance_state); - } else { - r = false; - } + if ((int16_t)idx > highest_td) + highest_td = idx; + action = &tap_dance_actions[idx]; - qk_tap_dance_state.active = true; - qk_tap_dance_state.pressed = record->event.pressed; + action->state.keycode = keycode; + action->state.pressed = record->event.pressed; if (record->event.pressed) { - qk_tap_dance_state.keycode = keycode; - qk_tap_dance_state.timer = timer_read (); - qk_tap_dance_state.count++; + action->state.count++; + action->state.timer = timer_read(); + + if (last_td && last_td != keycode) { + qk_tap_dance_action_t *paction = &tap_dance_actions[last_td - QK_TAP_DANCE]; + paction->state.interrupted = true; + process_tap_dance_action_on_dance_finished (paction); + reset_tap_dance (&paction->state); + } } + last_td = keycode; + break; default: - if (qk_tap_dance_state.keycode) { - // if we are here, the tap dance was interrupted by a different key - idx = qk_tap_dance_state.keycode - QK_TAP_DANCE; - action = tap_dance_actions[idx]; + if (!record->event.pressed) + return true; + + if (highest_td == -1) + return true; - process_tap_dance_action_on_each_tap (action); + for (int i = 0; i <= highest_td; i++) { + action = &tap_dance_actions[i]; + if (action->state.count == 0) + continue; + action->state.interrupted = true; process_tap_dance_action_on_dance_finished (action); - reset_tap_dance (&qk_tap_dance_state); - qk_tap_dance_state.active = false; + reset_tap_dance (&action->state); } break; } - return r; + return true; } void matrix_scan_tap_dance () { - if (qk_tap_dance_state.active && timer_elapsed (qk_tap_dance_state.timer) > TAPPING_TERM) { - // if we are here, the tap dance was timed out - uint16_t idx = qk_tap_dance_state.keycode - QK_TAP_DANCE; - qk_tap_dance_action_t action = tap_dance_actions[idx]; + if (highest_td == -1) + return; + + for (int i = 0; i <= highest_td; i++) { + qk_tap_dance_action_t *action = &tap_dance_actions[i]; - process_tap_dance_action_on_dance_finished (action); - reset_tap_dance (&qk_tap_dance_state); + if (action->state.count && timer_elapsed (action->state.timer) > TAPPING_TERM) { + process_tap_dance_action_on_dance_finished (action); + reset_tap_dance (&action->state); + } } } void reset_tap_dance (qk_tap_dance_state_t *state) { - uint16_t idx = state->keycode - QK_TAP_DANCE; - qk_tap_dance_action_t action; + qk_tap_dance_action_t *action; if (state->pressed) return; - action = tap_dance_actions[idx]; + action = &tap_dance_actions[state->keycode - QK_TAP_DANCE]; + process_tap_dance_action_on_reset (action); - state->keycode = 0; state->count = 0; - state->active = false; + state->interrupted = false; + state->finished = false; + last_td = 0; } diff --git a/quantum/process_keycode/process_tap_dance.h b/quantum/process_keycode/process_tap_dance.h index 6a1258067..d7b857bdc 100644 --- a/quantum/process_keycode/process_tap_dance.h +++ b/quantum/process_keycode/process_tap_dance.h @@ -11,8 +11,9 @@ typedef struct uint8_t count; uint16_t keycode; uint16_t timer; - bool active:1; - bool pressed:1; + bool interrupted; + bool pressed; + bool finished; } qk_tap_dance_state_t; #define TD(n) (QK_TAP_DANCE + n) @@ -26,6 +27,7 @@ typedef struct qk_tap_dance_user_fn_t on_dance_finished; qk_tap_dance_user_fn_t on_reset; } fn; + qk_tap_dance_state_t state; void *user_data; } qk_tap_dance_action_t; @@ -48,8 +50,7 @@ typedef struct .fn = { user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_reset } \ } -extern const qk_tap_dance_action_t tap_dance_actions[]; -extern bool td_debug_enable; +extern qk_tap_dance_action_t tap_dance_actions[]; /* To be used internally */ diff --git a/readme.md b/readme.md index e2221e749..8c07a5d1f 100644 --- a/readme.md +++ b/readme.md @@ -431,7 +431,7 @@ enum { }; //Tap Dance Definitions -const qk_tap_dance_action_t tap_dance_actions[] = { +qk_tap_dance_action_t tap_dance_actions[] = { //Tap once for Esc, twice for Caps Lock [TD_ESC_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS) // Other declarations would go here, separated by commas, if you have them @@ -517,7 +517,7 @@ void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { ergodox_right_led_3_off(); } -const qk_tap_dance_action_t tap_dance_actions[] = { +qk_tap_dance_action_t tap_dance_actions[] = { [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) ,[CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset) ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) -- cgit v1.2.3 From e3486caf870b4e4adf915f490e3905d4e24ce2ac Mon Sep 17 00:00:00 2001 From: Xyverz Date: Wed, 17 Aug 2016 14:54:05 -0700 Subject: Create readme.md --- keyboards/ergodox/keymaps/xyverz/readme.md | 5 +++++ 1 file changed, 5 insertions(+) create mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md new file mode 100644 index 000000000..9cb22bde6 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -0,0 +1,5 @@ +# PLEASE NOTE + +## This keymap is optomised for the EZ and Original ergodox. + +It will need modification in order to work on the Infinity. -- cgit v1.2.3 From ef95c10c6659ecc5e23b126d9ac4f3b2d169efb2 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Wed, 17 Aug 2016 14:55:01 -0700 Subject: Update readme.md --- keyboards/ergodox/keymaps/xyverz/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 9cb22bde6..22e771b09 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -2,4 +2,4 @@ ## This keymap is optomised for the EZ and Original ergodox. -It will need modification in order to work on the Infinity. +It will need **substantial** modification in order to work on the Infinity. -- cgit v1.2.3 From 035290b7d84e1f2c4d473d585b66e1dde9b3bdee Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 18 Aug 2016 00:22:56 -0700 Subject: Added a readme, tidied up comments in the keymap. --- keyboards/ergodox/keymaps/xyverz/keymap.c | 53 ++++++------- keyboards/ergodox/keymaps/xyverz/readme.md | 123 ++++++++++++++++++++++++++++- 2 files changed, 147 insertions(+), 29 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c index c5ce99dd2..7a16367bf 100644 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -1,4 +1,10 @@ /* + * PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are + * based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to + * figure out where the keys are in the matrix and redo the layout arrays below. + * + * About this keymap: + * * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner * keys. I've decided to continue using this layout with my ErgoDox. @@ -33,8 +39,9 @@ extern keymap_config_t keymap_config; #define COLEMAK M(_CM) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Dvorak layer - * + +[_DV] = { // layer 0 : Dvorak +/* * ,--------------------------------------------------. ,--------------------------------------------------. * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| @@ -55,9 +62,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `--------------------' `--------------------' * */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[_DV] = { // layer 0 : Dvorak // left hand {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END }, @@ -77,8 +81,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO } }, -/* Keymap 1: QWERTY layer - * + +[_QW] = { // layer 1 : QWERTY +/* * ,--------------------------------------------------. ,--------------------------------------------------. * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| @@ -98,9 +103,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | End | | PgDn | | | * `--------------------' `--------------------' */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[_QW] = { // layer 1 : QWERTY // left hand {KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, @@ -120,8 +122,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } }, -/* Keymap 2: Colemak layer - * + +[_CM] = { // layer 2 : Colemak +/* * ,--------------------------------------------------. ,--------------------------------------------------. * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| @@ -141,9 +144,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | End | | PgDn | | | * `--------------------' `--------------------' */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[_CM] = { // layer 2 : Colemak // left hand {KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, KC_NO }, {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, @@ -163,15 +163,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } }, -/* Keymap 3: Symbol Layer - * + +[_MD] = { // layer 3 : Media layer +/* * ,--------------------------------------------------. ,--------------------------------------------------. * | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | PrSc | ScLk | Paus | | FN4 | | FN5 | | Mute | Vol- | Vol+ | | | + * | | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | - * |--------+------+------+------+------+------| FN4 | | FN5 |------+------+------+------+------+--------| + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * | | | | | | | | | | | | @@ -184,8 +185,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | * `--------------------' `--------------------' */ -// Media Layer -[_MD] = { // layer 3 : Media layer // left hand {RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO }, {KC_F1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, @@ -205,15 +204,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO } }, -/* Keymap 4: Keypad layer - * + +[_KP] = { // layer 4 : Keypad layer +/* * ,--------------------------------------------------. ,--------------------------------------------------. * | Power | | | | | | | | | | NmLk | KP / | KP * | KP - | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Sleep | | | | | | FN5 | | FN4 | | KP 7 | KP 8 | KP 9 | KP + | | + * | Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | - * |--------+------+------+------+------+------| FN5 | | FN4 |------+------+------+------+------+--------| + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * | | | | | | | KP 0 | | KP . |KP Ent| | @@ -226,8 +226,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | * `--------------------' `--------------------' */ -// Keypad Layer -[_KP] = { // layer 4 : Keypad layer // left hand {KC_PWR, KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO }, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, @@ -247,6 +245,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO } }, + }; const uint16_t PROGMEM fn_actions[] = { diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 22e771b09..42ae8fe53 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -1,5 +1,124 @@ -# PLEASE NOTE +# Xyverz's ErgoDox EZ Keymap -## This keymap is optomised for the EZ and Original ergodox. +## Please Note: It will need **substantial** modification in order to work on the Infinity. + +PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below. + +## About this keymap: + +The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox. + +The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional keys as shown in the diagrams. The Colemak layout is merely an adaptation of that. + +I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. + +For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined, beginning on line 81. + +### Layer 0: Dvorak layer + +,--------------------------------------------------. ,--------------------------------------------------. +| ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | +|--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| +| LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | LCtr | LAlt | | Ralt | RCtr | + ,------|------|------| |------+------+------. + | | | Home | | PgUp | | | + | BkSp | Del |------| |------| Enter| Space| + | | | End | | PgDn | | | + `--------------------' `--------------------' + +### Layer 1: QWERTY layer + +,--------------------------------------------------. ,--------------------------------------------------. +| = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | +|--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| +| LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | LCtr | LAlt | | Ralt | RCtr | + ,------|------|------| |------+------+------. + | | | Home | | PgUp | | | + | BkSp | Del |------| |------| Enter| Space| + | | | End | | PgDn | | | + `--------------------' `--------------------' + +### Keymap 2: Colemak layer + +,--------------------------------------------------. ,--------------------------------------------------. +| = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | +|--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| +| LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | LCtr | LAlt | | Ralt | RCtr | + ,------|------|------| |------+------+------. + | | | Home | | PgUp | | | + | BkSp | Del |------| |------| Enter| Space| + | | | End | | PgDn | | | + `--------------------' `--------------------' + +### layer 3 : Media layer + +,--------------------------------------------------. ,--------------------------------------------------. +| TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | |Dvorak|Qwerty|Colemk| | | | | | | | | | | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' + + + +### Keymap 4: Keypad layer + +,--------------------------------------------------. ,--------------------------------------------------. +| Power | | | | | | | | | | NmLk | KP / | KP| KP - | | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | KP 0 | | KP . |KP Ent| | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' -- cgit v1.2.3 From 4dd641a128aa93f9decec3387b7c34a01007eb4a Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 18 Aug 2016 00:27:54 -0700 Subject: Hopefully this fixes the layout diagrams. --- keyboards/ergodox/keymaps/xyverz/readme.md | 182 ++++++++++++++--------------- 1 file changed, 91 insertions(+), 91 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 42ae8fe53..8bcf5b303 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -18,107 +18,107 @@ For a better explanation of the layout matrices shown below, take a look at ../. ### Layer 0: Dvorak layer -,--------------------------------------------------. ,--------------------------------------------------. -| ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | -|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| -| Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | -|--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| -| LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | -`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | LCtr | LAlt | | Ralt | RCtr | - ,------|------|------| |------+------+------. - | | | Home | | PgUp | | | - | BkSp | Del |------| |------| Enter| Space| - | | | End | | PgDn | | | - `--------------------' `--------------------' + ,--------------------------------------------------. ,--------------------------------------------------. + | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | LCtr | LAlt | | Ralt | RCtr | + ,------|------|------| |------+------+------. + | | | Home | | PgUp | | | + | BkSp | Del |------| |------| Enter| Space| + | | | End | | PgDn | | | + `--------------------' `--------------------' ### Layer 1: QWERTY layer -,--------------------------------------------------. ,--------------------------------------------------. -| = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | -|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| -| Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | -|--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| -| LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | -`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | LCtr | LAlt | | Ralt | RCtr | - ,------|------|------| |------+------+------. - | | | Home | | PgUp | | | - | BkSp | Del |------| |------| Enter| Space| - | | | End | | PgDn | | | - `--------------------' `--------------------' - + ,--------------------------------------------------. ,--------------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | LCtr | LAlt | | Ralt | RCtr | + ,------|------|------| |------+------+------. + | | | Home | | PgUp | | | + | BkSp | Del |------| |------| Enter| Space| + | | | End | | PgDn | | | + `--------------------' `--------------------' + ### Keymap 2: Colemak layer -,--------------------------------------------------. ,--------------------------------------------------. -| = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | -|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| -| Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | -|--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| -| LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | -`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | LCtr | LAlt | | Ralt | RCtr | - ,------|------|------| |------+------+------. - | | | Home | | PgUp | | | - | BkSp | Del |------| |------| Enter| Space| - | | | End | | PgDn | | | - `--------------------' `--------------------' + ,--------------------------------------------------. ,--------------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | LCtr | LAlt | | Ralt | RCtr | + ,------|------|------| |------+------+------. + | | | Home | | PgUp | | | + | BkSp | Del |------| |------| Enter| Space| + | | | End | | PgDn | | | + `--------------------' `--------------------' ### layer 3 : Media layer -,--------------------------------------------------. ,--------------------------------------------------. -| TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | -|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| -| | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| | |Dvorak|Qwerty|Colemk| | | | | | | | | | | -`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | | | | | | | | | | | | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | | | | | | - ,------|------|------| |------+------+------. - | | | | | | | | - | | |------| |------| | | - | | | | | | | | - `--------------------' `--------------------' + ,--------------------------------------------------. ,--------------------------------------------------. + | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' ### Keymap 4: Keypad layer -,--------------------------------------------------. ,--------------------------------------------------. -| Power | | | | | | | | | | NmLk | KP / | KP| KP - | | -|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| -| Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | -|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| -| | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | -`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | | | | | | | KP 0 | | KP . |KP Ent| | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | | | | | | - ,------|------|------| |------+------+------. - | | | | | | | | - | | |------| |------| | | - | | | | | | | | - `--------------------' `--------------------' + ,--------------------------------------------------. ,--------------------------------------------------. + | Power | | | | | | | | | | NmLk | KP / | KP| KP - | | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | KP 0 | | KP . |KP Ent| | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' -- cgit v1.2.3 From 118ad691c46454df8d8aa810190cfa4e21f8952b Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 18 Aug 2016 00:34:22 -0700 Subject: more formatting changes --- keyboards/ergodox/keymaps/xyverz/readme.md | 180 ++++++++++++++--------------- 1 file changed, 90 insertions(+), 90 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 8bcf5b303..32e569b38 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -18,107 +18,107 @@ For a better explanation of the layout matrices shown below, take a look at ../. ### Layer 0: Dvorak layer - ,--------------------------------------------------. ,--------------------------------------------------. - | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | - |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | - |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| - | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | - `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | LCtr | LAlt | | Ralt | RCtr | - ,------|------|------| |------+------+------. - | | | Home | | PgUp | | | - | BkSp | Del |------| |------| Enter| Space| - | | | End | | PgDn | | | - `--------------------' `--------------------' + ,--------------------------------------------------.,--------------------------------------------------. + | ] | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | [ | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Tab | ' | , | . | Y | Y | || | F | G | C | R | L | \ | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | CapsLk | A | O | E | U | I |------||------| D | H | T | N | S | - | + |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | X | || | B | M | W | V | Z | RShift | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | LCtr | LAlt || Ralt | RCtr | + ,------|------|------||------+------+------. + | | | Home || PgUp | | | + | BkSp | Del |------||------| Enter| Space| + | | | End || PgDn | | | + `--------------------'`--------------------' ### Layer 1: QWERTY layer - ,--------------------------------------------------. ,--------------------------------------------------. - | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | - |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | - |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| - | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | - `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | LCtr | LAlt | | Ralt | RCtr | - ,------|------|------| |------+------+------. - | | | Home | | PgUp | | | - | BkSp | Del |------| |------| Enter| Space| - | | | End | | PgDn | | | - `--------------------' `--------------------' + ,--------------------------------------------------.,--------------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Tab | Q | W | E | R | T | || | Y | U | I | O | P | \ | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | CapsLk | A | S | D | F | G |------||------| H | J | K | L | ; | ' | + |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | || | N | M | , | . | / | RShift | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | LCtr | LAlt || Ralt | RCtr | + ,------|------|------||------+------+------. + | | | Home || PgUp | | | + | BkSp | Del |------||------| Enter| Space| + | | | End || PgDn | | | + `--------------------'`--------------------' ### Keymap 2: Colemak layer - ,--------------------------------------------------. ,--------------------------------------------------. - | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | - |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | - |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| - | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | - `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | LCtr | LAlt | | Ralt | RCtr | - ,------|------|------| |------+------+------. - | | | Home | | PgUp | | | - | BkSp | Del |------| |------| Enter| Space| - | | | End | | PgDn | | | - `--------------------' `--------------------' + ,--------------------------------------------------.,--------------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Tab | Q | W | F | P | G | || | J | L | U | Y | ; | \ | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | BkSpc | A | R | S | T | D |------||------| H | N | E | I | O | ' | + |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | || | K | M | , | . | / | RShift | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | LCtr | LAlt || Ralt | RCtr | + ,------|------|------||------+------+------. + | | | Home || PgUp | | | + | BkSp | Del |------||------| Enter| Space| + | | | End || PgDn | | | + `--------------------'`--------------------' ### layer 3 : Media layer - ,--------------------------------------------------. ,--------------------------------------------------. - | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | - |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - | | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | - `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | | | | | | | | | | | | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | | | | | | - ,------|------|------| |------+------+------. - | | | | | | | | - | | |------| |------| | | - | | | | | | | | - `--------------------' `--------------------' + ,--------------------------------------------------.,--------------------------------------------------. + | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 || F12 | F6 | F7 | F8 | F9 | F10 | | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | | | PrSc | ScLk | Paus | | || | | Mute | Vol- | Vol+ | | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | | | | | | |------||------| Stop | Prev | Play | Next | Sel | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | | |Dvorak|Qwerty|Colemk| | || | | | | | | | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | | + | | | || | | | + `--------------------'`--------------------' ### Keymap 4: Keypad layer - ,--------------------------------------------------. ,--------------------------------------------------. - | Power | | | | | | | | | | NmLk | KP / | KP| KP - | | - |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - | Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | - |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | - `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - | | | | | | | KP 0 | | KP . |KP Ent| | - `----------------------------------' `----------------------------------' - ,-------------. ,-------------. - | | | | | | - ,------|------|------| |------+------+------. - | | | | | | | | - | | |------| |------| | | - | | | | | | | | - `--------------------' `--------------------' + ,--------------------------------------------------.,--------------------------------------------------. + | Power | | | | | | || | | NmLk | KP / | KP| KP - | | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Sleep | | | | | | || | | KP 7 | KP 8 | KP 9 | KP + | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | Wake | | | | | |------||------| | KP 4 | KP 5 | KP 6 | KP + | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | | | | | | | || | | KP 1 | KP 2 | KP 3 |KP Ent| | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | | | | | | | KP 0 | | KP . |KP Ent| | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | | + | | | || | | | + `--------------------'`--------------------' \ No newline at end of file -- cgit v1.2.3 From eb81978ecbeaa203c20df70c0c4fc56cb816ab6c Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 18 Aug 2016 00:35:32 -0700 Subject: One last formatting change --- keyboards/ergodox/keymaps/xyverz/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 32e569b38..89ac8cb04 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -105,7 +105,7 @@ For a better explanation of the layout matrices shown below, take a look at ../. ### Keymap 4: Keypad layer ,--------------------------------------------------.,--------------------------------------------------. - | Power | | | | | | || | | NmLk | KP / | KP| KP - | | + | Power | | | | | | || | | NmLk | KP / | KP * | KP - | | |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| | Sleep | | | | | | || | | KP 7 | KP 8 | KP 9 | KP + | | |--------+------+------+------+------+------| || |------+------+------+------+------+--------| -- cgit v1.2.3 From aa37a57e0f55694291290f9db61d8ff352d42454 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 18 Aug 2016 00:38:25 -0700 Subject: One last change to the readme. --- keyboards/ergodox/keymaps/xyverz/readme.md | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 89ac8cb04..255749323 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -2,9 +2,7 @@ ## Please Note: -It will need **substantial** modification in order to work on the Infinity. - -PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below. +This keymap will probably **not** work with the Infinity ErgoDox. It will need **substantial** modification in order to work on the Infinity. This is due to the fact that the mappings are based on the matrix positions in the keymap definition in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below. ## About this keymap: -- cgit v1.2.3 From ed1291bfbddc19c410e9c6d7bc4775b638b3e316 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 18 Aug 2016 22:43:31 -0700 Subject: Added compatibility for the Infinity ErgoDox to my Ergodox keymap. Updated readme.md to reflect this change. --- keyboards/ergodox/keymaps/xyverz/keymap.c | 225 ++++++++++++++++++++++------- keyboards/ergodox/keymaps/xyverz/readme.md | 6 +- 2 files changed, 178 insertions(+), 53 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c index 7a16367bf..397c8566f 100644 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -1,7 +1,7 @@ /* - * PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are - * based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to - * figure out where the keys are in the matrix and redo the layout arrays below. + * PLEASE NOTE: This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity, + * simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file is untested + * on the Infinity ErgoDox. * * About this keymap: * @@ -38,6 +38,11 @@ extern keymap_config_t keymap_config; #define QWERTY M(_QW) #define COLEMAK M(_CM) +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DV] = { // layer 0 : Dvorak @@ -62,24 +67,48 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `--------------------' `--------------------' * */ +#ifdef SUBPROJECT_infinity // Infinity Ergodox + // left hand + {XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME}, + {XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END }, + {KC_6, MO(_KP), XXXXXXX, MO(_MD), KC_DEL }, + {KC_5, KC_Y, KC_I, KC_X, KC_BSPC}, + {KC_4, KC_P, KC_U, KC_K, KC_RGHT}, + {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT}, + {KC_2, KC_COMM, KC_O, KC_Q, KC_INS }, + {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV }, + {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI}, + + //Right Hand + {XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP}, + {XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN}, + {KC_ESC, MO(_MD), XXXXXXX, MO(_KP), KC_ENT }, + {KC_6, KC_F, KC_D, KC_B, KC_SPC }, + {KC_7, KC_G, KC_H, KC_M, KC_UP }, + {KC_8, KC_C, KC_T, KC_W, KC_DOWN}, + {KC_9, KC_R, KC_N, KC_V, KC_SLSH}, + {KC_0, KC_L, KC_S, KC_Z, KC_EQL }, + {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI} +#else // Ergodox and Ergodox EZ // left hand - {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, + {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX}, {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END }, {KC_2, KC_COMM, KC_O, KC_Q, KC_INS, KC_DEL }, {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT, KC_BSPC}, {KC_4, KC_P, KC_U, KC_K, KC_RGHT, KC_HOME}, - {KC_5, KC_Y, KC_I, KC_X, KC_NO, KC_LCTL}, - {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + {KC_5, KC_Y, KC_I, KC_X, XXXXXXX, KC_LCTL}, + {KC_ESC, XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT}, // right hand - {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, - {KC_6, KC_F, KC_D, KC_B, KC_NO, KC_RCTL}, + {KC_ESC, XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT}, + {KC_6, KC_F, KC_D, KC_B, XXXXXXX, KC_RCTL}, {KC_7, KC_G, KC_H, KC_M, KC_UP, KC_PGUP}, {KC_8, KC_C, KC_T, KC_W, KC_DOWN, KC_SPC }, {KC_9, KC_R, KC_N, KC_V, KC_SLSH, KC_ENT }, {KC_0, KC_L, KC_S, KC_Z, KC_EQL, KC_PGDN}, - {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO } -}, + {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, XXXXXXX} +#endif + }, [_QW] = { // layer 1 : QWERTY @@ -103,23 +132,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | End | | PgDn | | | * `--------------------' `--------------------' */ +#ifdef SUBPROJECT_infinity // Infinity Ergodox + // left hand + {XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME}, + {XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END }, + {KC_6, MO(_KP), XXXXXXX, MO(_MD), KC_DEL }, + {KC_5, KC_Y, KC_I, KC_X, KC_BSPC}, + {KC_4, KC_P, KC_U, KC_K, KC_RGHT}, + {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT}, + {KC_2, KC_COMM, KC_O, KC_Q, KC_INS }, + {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV }, + {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI}, + + //Right Hand + {XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP}, + {XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN}, + {KC_ESC, MO(_MD), XXXXXXX, MO(_KP), KC_ENT }, + {KC_6, KC_F, KC_D, KC_B, KC_SPC }, + {KC_7, KC_G, KC_H, KC_M, KC_UP }, + {KC_8, KC_C, KC_T, KC_W, KC_DOWN}, + {KC_9, KC_R, KC_N, KC_V, KC_SLSH}, + {KC_0, KC_L, KC_S, KC_Z, KC_EQL }, + {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI} +#else // Ergodox and Ergodox EZ // left hand - {KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, + {KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX}, {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, {KC_2, KC_W, KC_S, KC_X, KC_INS, KC_DEL }, {KC_3, KC_E, KC_D, KC_C, KC_LEFT, KC_BSPC}, {KC_4, KC_R, KC_F, KC_V, KC_RGHT, KC_HOME}, - {KC_5, KC_T, KC_G, KC_B, KC_NO, KC_LCTL}, - {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + {KC_5, KC_T, KC_G, KC_B, XXXXXXX, KC_LCTL}, + {KC_ESC, XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT}, // right hand - {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, - {KC_6, KC_Y, KC_H, KC_N, KC_NO, KC_RCTL}, + {KC_ESC, XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT}, + {KC_6, KC_Y, KC_H, KC_N, XXXXXXX, KC_RCTL}, {KC_7, KC_U, KC_J, KC_M, KC_UP, KC_PGUP}, {KC_8, KC_I, KC_K, KC_COMM, KC_DOWN, KC_SPC }, {KC_9, KC_O, KC_L, KC_DOT, KC_LBRC, KC_ENT }, {KC_0, KC_P, KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN}, - {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } + {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX} +#endif }, @@ -144,23 +197,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | End | | PgDn | | | * `--------------------' `--------------------' */ +#ifdef SUBPROJECT_infinity // Infinity Ergodox + // left hand + {XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME}, + {XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END }, + {KC_6, MO(_KP), XXXXXXX, MO(_MD), KC_DEL }, + {KC_5, KC_Y, KC_I, KC_X, KC_BSPC}, + {KC_4, KC_P, KC_U, KC_K, KC_RGHT}, + {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT}, + {KC_2, KC_COMM, KC_O, KC_Q, KC_INS }, + {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV }, + {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI}, + + //Right Hand + {XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP}, + {XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN}, + {KC_ESC, MO(_MD), XXXXXXX, MO(_KP), KC_ENT }, + {KC_6, KC_F, KC_D, KC_B, KC_SPC }, + {KC_7, KC_G, KC_H, KC_M, KC_UP }, + {KC_8, KC_C, KC_T, KC_W, KC_DOWN}, + {KC_9, KC_R, KC_N, KC_V, KC_SLSH}, + {KC_0, KC_L, KC_S, KC_Z, KC_EQL }, + {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI} +#else // Ergodox and Ergodox EZ // left hand - {KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, KC_NO }, + {KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, XXXXXXX}, {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, {KC_2, KC_W, KC_R, KC_X, KC_INS, KC_DEL }, {KC_3, KC_F, KC_S, KC_C, KC_LEFT, KC_BSPC}, {KC_4, KC_P, KC_T, KC_V, KC_RGHT, KC_HOME}, - {KC_5, KC_G, KC_D, KC_B, KC_NO, KC_LCTL}, - {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + {KC_5, KC_G, KC_D, KC_B, XXXXXXX, KC_LCTL}, + {KC_ESC, XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT}, // right hand - {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, - {KC_6, KC_J, KC_H, KC_K, KC_NO, KC_RCTL}, + {KC_ESC, XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT}, + {KC_6, KC_J, KC_H, KC_K, XXXXXXX, KC_RCTL}, {KC_7, KC_L, KC_N, KC_M, KC_UP, KC_PGUP}, {KC_8, KC_U, KC_E, KC_COMM, KC_DOWN, KC_SPC }, {KC_9, KC_Y, KC_I, KC_DOT, KC_LBRC, KC_ENT }, {KC_0, KC_SCLN, KC_O, KC_SLSH, KC_RBRC, KC_PGDN}, - {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } + {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX} +#endif }, @@ -185,23 +262,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | * `--------------------' `--------------------' */ +#ifdef SUBPROJECT_infinity // Infinity Ergodox + // left hand + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {KC_F11, _______, XXXXXXX, _______, _______}, + {KC_F5, _______, _______, _______, _______}, + {KC_F4, KC_PAUS, _______, COLEMAK, _______}, + {KC_F3, KC_SLCK, _______, QWERTY, _______}, + {KC_F2, KC_PSCR, _______, DVORAK, _______}, + {KC_F1, _______, _______, _______, _______}, + {RESET, _______, _______, _______, _______}, + + //Right Hand + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {KC_F12, _______, XXXXXXX, _______, _______}, + {KC_F6, _______, KC_MSTP, _______, _______}, + {KC_F7, KC_VOLU, KC_MPRV, _______, _______}, + {KC_F8, KC_VOLD, KC_MPLY, _______, _______}, + {KC_F9, KC_MUTE, KC_MNXT, _______, _______}, + {KC_F10, _______, KC_MSEL, _______, _______}, + {_______, _______, _______, _______, _______}, +#else // Ergodox and Ergodox EZ // left hand - {RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO }, - {KC_F1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_F2, KC_PSCR, KC_TRNS, DVORAK, KC_TRNS, KC_TRNS}, - {KC_F3, KC_SLCK, KC_TRNS, QWERTY, KC_TRNS, KC_TRNS}, - {KC_F4, KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS}, - {KC_F5, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, - {KC_F11, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + {RESET, _______, _______, _______, _______, XXXXXXX}, + {KC_F1, _______, _______, _______, _______, _______}, + {KC_F2, KC_PSCR, _______, DVORAK, _______, _______}, + {KC_F3, KC_SLCK, _______, QWERTY, _______, _______}, + {KC_F4, KC_PAUS, _______, COLEMAK, _______, _______}, + {KC_F5, _______, _______, _______, XXXXXXX, _______}, + {KC_F11, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, // right hand - {KC_F12, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, - {KC_F6, KC_TRNS, KC_MSTP, KC_TRNS, KC_NO, KC_TRNS}, - {KC_F7, KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_F8, KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_F9, KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_F10, KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO } + {KC_F12, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, + {KC_F6, _______, KC_MSTP, _______, XXXXXXX, _______}, + {KC_F7, KC_MUTE, KC_MPRV, _______, _______, _______}, + {KC_F8, KC_VOLD, KC_MPLY, _______, _______, _______}, + {KC_F9, KC_VOLU, KC_MNXT, _______, _______, _______}, + {KC_F10, _______, KC_MSEL, _______, _______, _______}, + {_______, _______, _______, _______, _______, XXXXXXX} +#endif }, @@ -226,23 +327,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | * `--------------------' `--------------------' */ +#ifdef SUBPROJECT_infinity // Infinity Ergodox + // left hand + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {_______, _______, XXXXXXX, _______, _______}, + {_______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______}, + {KC_PWR, KC_SLEP, KC_WAKE, _______, _______}, + + //Right Hand + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, + {_______, _______, XXXXXXX, _______, _______}, + {_______, _______, KC_MSTP, _______, _______}, + {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0 }, + {KC_PSLS, KC_P8, KC_P5, KC_P2, _______}, + {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT}, + {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT}, + {_______, _______, _______, _______, _______}, +#else // Ergodox and Ergodox EZ // left hand - {KC_PWR, KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO }, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, - {KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + {KC_PWR, KC_SLEP, KC_WAKE, _______, _______, XXXXXXX}, + {_______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, XXXXXXX, _______}, + {_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, // right hand - {KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, - {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, KC_TRNS}, - {KC_PSLS, KC_P8, KC_P5, KC_P2, KC_NO, KC_TRNS}, - {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, KC_TRNS}, - {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO } + {_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, + {_______, _______, _______, _______, XXXXXXX, _______}, + {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, _______}, + {KC_PSLS, KC_P8, KC_P5, KC_P2, XXXXXXX, _______}, + {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, _______}, + {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, _______}, + {_______, _______, _______, _______, XXXXXXX, XXXXXXX} +#endif }, diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 255749323..e6cb582c5 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -2,7 +2,7 @@ ## Please Note: -This keymap will probably **not** work with the Infinity ErgoDox. It will need **substantial** modification in order to work on the Infinity. This is due to the fact that the mappings are based on the matrix positions in the keymap definition in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below. +This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity, simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file builds cleanly as is but as of this writing has not been tested on the Infinity ErgoDox. YMMV. ## About this keymap: @@ -12,7 +12,7 @@ The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. -For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined, beginning on line 81. +For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined beginning on line 81, or in ../../infinity/infinity.h beginning at line 72. ### Layer 0: Dvorak layer @@ -119,4 +119,4 @@ For a better explanation of the layout matrices shown below, take a look at ../. | | | || | | | | | |------||------| | | | | | || | | | - `--------------------'`--------------------' \ No newline at end of file + `--------------------'`--------------------' -- cgit v1.2.3 From 32216066e7a6881378f7f46995a00da36c0d34f3 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:36:41 -0600 Subject: Adding nicer Infinity build instructions. --- keyboards/ergodox/readme.md | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index f81d7cd8d..9f8941863 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,3 +1,14 @@ +# Infinity on Ubuntu Quickstart + +To build an Infinity firmware under Ubuntu (tested on 15.10): + + - Run the `util/install_dependencies.sh` script as root. + - Build the firmware with `make keymap=keymapname subproject=infinity` + - Plug in the left hand keyboard only. + - Press the program button (back of keyboard, above thumb pad). + - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` + - Install the right hand firmware, but I haven't figured this out yet. + # Getting started There are two main ways you could customize the ErgoDox (EZ and Infinity) -- cgit v1.2.3 From 50531068b3aa1b4aced20a1488e3ae052925f651 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:42:41 -0600 Subject: Adding jafo layout. --- keyboards/ergodox/keymaps/jafo/jafo-Notes | 10 ++ keyboards/ergodox/keymaps/jafo/jafo-layout.pdf | Bin 0 -> 185426 bytes keyboards/ergodox/keymaps/jafo/jafo_highres.png | Bin 0 -> 179460 bytes keyboards/ergodox/keymaps/jafo/keymap.c | 184 ++++++++++++++++++++++++ keyboards/ergodox/keymaps/jafo/readme.md | 20 +++ 5 files changed, 214 insertions(+) create mode 100644 keyboards/ergodox/keymaps/jafo/jafo-Notes create mode 100644 keyboards/ergodox/keymaps/jafo/jafo-layout.pdf create mode 100644 keyboards/ergodox/keymaps/jafo/jafo_highres.png create mode 100644 keyboards/ergodox/keymaps/jafo/keymap.c create mode 100644 keyboards/ergodox/keymaps/jafo/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/jafo/jafo-Notes b/keyboards/ergodox/keymaps/jafo/jafo-Notes new file mode 100644 index 000000000..9376125e9 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/jafo-Notes @@ -0,0 +1,10 @@ +These are notes on how to build and deploy the firmware to Ez, but they are +from before the qmk restructuring. + +cd qmk_firmware/keyboard/ergodox_ez +make KEYMAP=jafo +cp ergodox_ez.hex keymaps/jafo/ +/tmp/teensy.64bit +Open hex keymap file +Program +Upload diff --git a/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf new file mode 100644 index 000000000..189b49b12 Binary files /dev/null and b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf differ diff --git a/keyboards/ergodox/keymaps/jafo/jafo_highres.png b/keyboards/ergodox/keymaps/jafo/jafo_highres.png new file mode 100644 index 000000000..e3d7cef85 Binary files /dev/null and b/keyboards/ergodox/keymaps/jafo/jafo_highres.png differ diff --git a/keyboards/ergodox/keymaps/jafo/keymap.c b/keyboards/ergodox/keymaps/jafo/keymap.c new file mode 100644 index 000000000..c5f21bd82 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox_ez.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Grv | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | = | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc/Cmd| A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| L2 | | L2 |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" | Del | Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Ctrl/Esc| Alt| | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_EQL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + GUI_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, TG(MDIA), + LT(SYMB,KC_GRV),KC_QUOT, KC_DELT, KC_LEFT,KC_RGHT, + CTL_T(KC_ESC), KC_LALT, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + TG(MDIA), KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| LEFT | DOWN | UP | RIGHT| | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | Lclk | Mclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN3, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/jafo/readme.md b/keyboards/ergodox/keymaps/jafo/readme.md new file mode 100644 index 000000000..c870dfd05 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/readme.md @@ -0,0 +1,20 @@ +# ErgoDox EZ "jafo" Configuration + +This is a layout based on the ErgoDox Ez default layout, but with some +customizations I made for my use-case. I use Linux, vi and the i3 window +manager, so I made these changes: + +- Arrow keys laid out in vi positions in media layer. + +- Esc (tap) and Win (held) to the left of A. i3 uses Win key for navigation + and having that be symmetric on the left and right makes it easier. + +- Grave accent below equals, I was having a hard time using ~ + +- Layer 2 switch below the L1 switch, so I can go into a mode where I get + arrow keys under my vi motion fingers. + +- Making the Ctrl (held) and Esc (tap) on my thumbs symmetric. Not sure I + need that with the Esc left of A and Ctrl on the Z and / keys when held... + +![Jafo](jafo_highres.png) -- cgit v1.2.3 From b918aa6bab85e7dba586a9ee2bde650b721113c2 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:49:29 -0600 Subject: Adding submodule note. --- keyboards/ergodox/readme.md | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 9f8941863..c3aa6c9da 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -3,6 +3,7 @@ To build an Infinity firmware under Ubuntu (tested on 15.10): - Run the `util/install_dependencies.sh` script as root. + - Check out the submodules with `git submodule update --init --recursive` - Build the firmware with `make keymap=keymapname subproject=infinity` - Plug in the left hand keyboard only. - Press the program button (back of keyboard, above thumb pad). -- cgit v1.2.3 From 30c63b1495ac49cf4f7ea9e6271ade53496f7770 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 14:52:05 -0600 Subject: Noting the change directory. --- keyboards/ergodox/readme.md | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index c3aa6c9da..1c1181dba 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -4,6 +4,7 @@ To build an Infinity firmware under Ubuntu (tested on 15.10): - Run the `util/install_dependencies.sh` script as root. - Check out the submodules with `git submodule update --init --recursive` + - Go into the ErgoDox directory with `cd keyboards/ergodox` - Build the firmware with `make keymap=keymapname subproject=infinity` - Plug in the left hand keyboard only. - Press the program button (back of keyboard, above thumb pad). -- cgit v1.2.3 From 44441de8cad7255fd0637459ed39b89e34751b78 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 17:04:39 +0300 Subject: Split keyboard makefiles into rules and Makefile --- Makefile | 2 +- keyboards/alps64/Makefile | 69 +---------------------- keyboards/alps64/rules.mk | 66 ++++++++++++++++++++++ keyboards/amj60/Makefile | 71 +----------------------- keyboards/amj60/rules.mk | 66 ++++++++++++++++++++++ keyboards/arrow_pad/Makefile | 73 +----------------------- keyboards/arrow_pad/rules.mk | 70 +++++++++++++++++++++++ keyboards/atomic/Makefile | 72 +----------------------- keyboards/atomic/rules.mk | 69 +++++++++++++++++++++++ keyboards/atreus/Makefile | 89 +---------------------------- keyboards/atreus/rules.mk | 82 +++++++++++++++++++++++++++ keyboards/bantam44/Makefile | 73 +----------------------- keyboards/bantam44/rules.mk | 67 ++++++++++++++++++++++ keyboards/chibios_test/Makefile | 11 +--- keyboards/chibios_test/rules.mk | 8 +++ keyboards/clueboard/Makefile | 108 +----------------------------------- keyboards/clueboard/rules.mk | 103 ++++++++++++++++++++++++++++++++++ keyboards/cluecard/Makefile | 77 +------------------------ keyboards/cluecard/rules.mk | 70 +++++++++++++++++++++++ keyboards/cluepad/Makefile | 71 +----------------------- keyboards/cluepad/rules.mk | 65 ++++++++++++++++++++++ keyboards/ergodox/Makefile | 33 +---------- keyboards/ergodox/rules.mk | 28 ++++++++++ keyboards/gh60/Makefile | 77 +------------------------ keyboards/gh60/rules.mk | 68 +++++++++++++++++++++++ keyboards/handwired/Makefile | 2 +- keyboards/handwired/onekey/Makefile | 66 +--------------------- keyboards/handwired/rules.mk | 0 keyboards/hhkb/Makefile | 91 +----------------------------- keyboards/hhkb/rules.mk | 84 ++++++++++++++++++++++++++++ keyboards/infinity_chibios/Makefile | 69 +---------------------- keyboards/infinity_chibios/rules.mk | 66 ++++++++++++++++++++++ keyboards/jd45/Makefile | 72 +----------------------- keyboards/jd45/rules.mk | 67 ++++++++++++++++++++++ keyboards/kc60/Makefile | 77 +------------------------ keyboards/kc60/rules.mk | 70 +++++++++++++++++++++++ keyboards/kinesis/Makefile | 80 +------------------------- keyboards/kinesis/rules.mk | 73 ++++++++++++++++++++++++ keyboards/lets_split/Makefile | 77 +------------------------ keyboards/lets_split/rules.mk | 74 ++++++++++++++++++++++++ keyboards/phantom/Makefile | 75 +------------------------ keyboards/phantom/rules.mk | 69 +++++++++++++++++++++++ keyboards/planck/Makefile | 71 +----------------------- keyboards/planck/rules.mk | 67 ++++++++++++++++++++++ keyboards/preonic/Makefile | 72 +----------------------- keyboards/preonic/rules.mk | 69 +++++++++++++++++++++++ keyboards/retro_refit/Makefile | 75 +------------------------ keyboards/retro_refit/rules.mk | 68 +++++++++++++++++++++++ keyboards/s60-x/Makefile | 76 +------------------------ keyboards/s60-x/rules.mk | 69 +++++++++++++++++++++++ keyboards/satan/Makefile | 71 +----------------------- keyboards/satan/rules.mk | 66 ++++++++++++++++++++++ keyboards/sixkeyboard/Makefile | 76 +------------------------ keyboards/sixkeyboard/rules.mk | 70 +++++++++++++++++++++++ keyboards/tv44/Makefile | 76 +------------------------ keyboards/tv44/rules.mk | 69 +++++++++++++++++++++++ 56 files changed, 1792 insertions(+), 1903 deletions(-) create mode 100644 keyboards/alps64/rules.mk create mode 100644 keyboards/amj60/rules.mk create mode 100644 keyboards/arrow_pad/rules.mk create mode 100644 keyboards/atomic/rules.mk create mode 100644 keyboards/atreus/rules.mk create mode 100644 keyboards/bantam44/rules.mk create mode 100644 keyboards/chibios_test/rules.mk create mode 100644 keyboards/clueboard/rules.mk create mode 100644 keyboards/cluecard/rules.mk create mode 100644 keyboards/cluepad/rules.mk create mode 100644 keyboards/ergodox/rules.mk create mode 100644 keyboards/gh60/rules.mk create mode 100644 keyboards/handwired/rules.mk create mode 100644 keyboards/hhkb/rules.mk create mode 100644 keyboards/infinity_chibios/rules.mk create mode 100644 keyboards/jd45/rules.mk create mode 100644 keyboards/kc60/rules.mk create mode 100644 keyboards/kinesis/rules.mk create mode 100644 keyboards/lets_split/rules.mk create mode 100644 keyboards/phantom/rules.mk create mode 100644 keyboards/planck/rules.mk create mode 100644 keyboards/preonic/rules.mk create mode 100644 keyboards/retro_refit/rules.mk create mode 100644 keyboards/s60-x/rules.mk create mode 100644 keyboards/satan/rules.mk create mode 100644 keyboards/sixkeyboard/rules.mk create mode 100644 keyboards/tv44/rules.mk (limited to 'keyboards/ergodox') diff --git a/Makefile b/Makefile index 1e11dd5ff..b2a873532 100644 --- a/Makefile +++ b/Makefile @@ -12,7 +12,7 @@ STARTING_DIR := $(subst $(ABS_ROOT_DIR),,$(ABS_STARTING_DIR)) PATH_ELEMENTS := $(subst /, ,$(STARTING_DIR)) -QUANTUM_DIR:=$(ROOT_DIR)/quantum +MAKEFILE_INCLUDED=yes define NEXT_PATH_ELEMENT $$(eval CURRENT_PATH_ELEMENT := $$(firstword $$(PATH_ELEMENTS))) diff --git a/keyboards/alps64/Makefile b/keyboards/alps64/Makefile index d8325e6c8..4e2a6f00f 100644 --- a/keyboards/alps64/Makefile +++ b/keyboards/alps64/Makefile @@ -1,70 +1,3 @@ - - -# Target file name (without extension). - -# project specific files -SRC = led.c - -# MCU name -MCU = atmega32u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/alps64/rules.mk b/keyboards/alps64/rules.mk new file mode 100644 index 000000000..c326d3e26 --- /dev/null +++ b/keyboards/alps64/rules.mk @@ -0,0 +1,66 @@ + + +# Target file name (without extension). + +# project specific files +SRC = led.c + +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA \ No newline at end of file diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile index 1f695aa4d..4e2a6f00f 100644 --- a/keyboards/amj60/Makefile +++ b/keyboards/amj60/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk new file mode 100644 index 000000000..18403ac32 --- /dev/null +++ b/keyboards/amj60/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile index 09fcf3e7a..4e2a6f00f 100644 --- a/keyboards/arrow_pad/Makefile +++ b/keyboards/arrow_pad/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= yes # USB Nkey Rollover -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/arrow_pad/rules.mk b/keyboards/arrow_pad/rules.mk new file mode 100644 index 000000000..3dca9b6ea --- /dev/null +++ b/keyboards/arrow_pad/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file diff --git a/keyboards/atomic/Makefile b/keyboards/atomic/Makefile index 08e9205cb..4e2a6f00f 100644 --- a/keyboards/atomic/Makefile +++ b/keyboards/atomic/Makefile @@ -1,73 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk new file mode 100644 index 000000000..d0f3a3a1c --- /dev/null +++ b/keyboards/atomic/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile index 5894d231f..4e2a6f00f 100644 --- a/keyboards/atreus/Makefile +++ b/keyboards/atreus/Makefile @@ -1,88 +1,3 @@ - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER - ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -USB ?= /dev/cu.usbmodem1411 - -upload: build - $(ATREUS_UPLOAD_COMMAND) - +endif \ No newline at end of file diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk new file mode 100644 index 000000000..d71f50bb2 --- /dev/null +++ b/keyboards/atreus/rules.mk @@ -0,0 +1,82 @@ + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +USB ?= /dev/cu.usbmodem1411 + +upload: build + $(ATRUES_UPLOAD_COMMAND) \ No newline at end of file diff --git a/keyboards/bantam44/Makefile b/keyboards/bantam44/Makefile index 03893dbf8..4e2a6f00f 100644 --- a/keyboards/bantam44/Makefile +++ b/keyboards/bantam44/Makefile @@ -1,72 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk new file mode 100644 index 000000000..baa0e9e7a --- /dev/null +++ b/keyboards/bantam44/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/chibios_test/Makefile b/keyboards/chibios_test/Makefile index d9f2b8b83..4b07a6234 100644 --- a/keyboards/chibios_test/Makefile +++ b/keyboards/chibios_test/Makefile @@ -1,14 +1,5 @@ SUBPROJECT_DEFAULT = stm32_f072_onekey -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk new file mode 100644 index 000000000..4b5a84535 --- /dev/null +++ b/keyboards/chibios_test/rules.mk @@ -0,0 +1,8 @@ +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file \ No newline at end of file diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile index e6b13f955..b9bada8f8 100644 --- a/keyboards/clueboard/Makefile +++ b/keyboards/clueboard/Makefile @@ -1,109 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - SUBPROJECT_DEFAULT = rev2 -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change to no to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk new file mode 100644 index 000000000..3909fbd5c --- /dev/null +++ b/keyboards/clueboard/rules.mk @@ -0,0 +1,103 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file diff --git a/keyboards/cluecard/Makefile b/keyboards/cluecard/Makefile index 029d0b967..4e2a6f00f 100644 --- a/keyboards/cluecard/Makefile +++ b/keyboards/cluecard/Makefile @@ -1,76 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= yes # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/cluecard/rules.mk b/keyboards/cluecard/rules.mk new file mode 100644 index 000000000..454235877 --- /dev/null +++ b/keyboards/cluecard/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= yes # Audio output on port C6 diff --git a/keyboards/cluepad/Makefile b/keyboards/cluepad/Makefile index a331ff4dc..4e2a6f00f 100644 --- a/keyboards/cluepad/Makefile +++ b/keyboards/cluepad/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -# CONSOLE_ENABLE ?= yes # Console for debug(+400) -# COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality -RGBLIGHT_ENABLE ?= yes -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk new file mode 100644 index 000000000..19b16b95a --- /dev/null +++ b/keyboards/cluepad/rules.mk @@ -0,0 +1,65 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality +RGBLIGHT_ENABLE ?= yes +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile index 05fb588d1..716535005 100644 --- a/keyboards/ergodox/Makefile +++ b/keyboards/ergodox/Makefile @@ -1,34 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- SUBPROJECT_DEFAULT = ez -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= yes # Unicode - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk new file mode 100644 index 000000000..ac63d4eff --- /dev/null +++ b/keyboards/ergodox/rules.mk @@ -0,0 +1,28 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile index 39a9cc0ae..4e2a6f00f 100644 --- a/keyboards/gh60/Makefile +++ b/keyboards/gh60/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -# CONSOLE_ENABLE ?= yes # Console for debug(+400) -# COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR - include ../../Makefile -endif - +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk new file mode 100644 index 000000000..73f4bd76e --- /dev/null +++ b/keyboards/gh60/rules.mk @@ -0,0 +1,68 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/Makefile b/keyboards/handwired/Makefile index 57493a47c..4e2a6f00f 100644 --- a/keyboards/handwired/Makefile +++ b/keyboards/handwired/Makefile @@ -1,3 +1,3 @@ -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile index c6d10856a..4e2a6f00f 100644 --- a/keyboards/handwired/onekey/Makefile +++ b/keyboards/handwired/onekey/Makefile @@ -1,65 +1,3 @@ - - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -ifndef QUANTUM_DIR - include ../../../Makefile +ifndef MAKEFILE_INCLUDED + include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/rules.mk b/keyboards/handwired/rules.mk new file mode 100644 index 000000000..e69de29bb diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile index 6fe973e1e..4e2a6f00f 100644 --- a/keyboards/hhkb/Makefile +++ b/keyboards/hhkb/Makefile @@ -1,90 +1,3 @@ - - -# project specific files -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# as per original hasu settings -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -ifneq (, $(findstring yes, $(HHKB_JP))) - OPT_DEFS += -DHHKB_JP -endif - -debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION -debug-on: all - -debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT -debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) -debug-off: all +endif \ No newline at end of file diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk new file mode 100644 index 000000000..b43b5e23f --- /dev/null +++ b/keyboards/hhkb/rules.mk @@ -0,0 +1,84 @@ + + +# project specific files +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# as per original hasu settings +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +ifneq (, $(findstring yes, $(HHKB_JP))) + OPT_DEFS += -DHHKB_JP +endif + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) +debug-off: all diff --git a/keyboards/infinity_chibios/Makefile b/keyboards/infinity_chibios/Makefile index 649b43e64..4e2a6f00f 100644 --- a/keyboards/infinity_chibios/Makefile +++ b/keyboards/infinity_chibios/Makefile @@ -1,70 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX128BLDR4 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity KB -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = k20x5 - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -BOARD = MCHCK_K20 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/infinity_chibios/rules.mk b/keyboards/infinity_chibios/rules.mk new file mode 100644 index 000000000..56d6470b5 --- /dev/null +++ b/keyboards/infinity_chibios/rules.mk @@ -0,0 +1,66 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX128BLDR4 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity KB +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = k20x5 + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +BOARD = MCHCK_K20 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file \ No newline at end of file diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile index 75d544f16..4e2a6f00f 100644 --- a/keyboards/jd45/Makefile +++ b/keyboards/jd45/Makefile @@ -1,71 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk new file mode 100644 index 000000000..2f1e266a1 --- /dev/null +++ b/keyboards/jd45/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile index b00a488b9..4e2a6f00f 100644 --- a/keyboards/kc60/Makefile +++ b/keyboards/kc60/Makefile @@ -1,76 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk new file mode 100644 index 000000000..4efd6f988 --- /dev/null +++ b/keyboards/kc60/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/kinesis/Makefile b/keyboards/kinesis/Makefile index ca077e636..4e2a6f00f 100644 --- a/keyboards/kinesis/Makefile +++ b/keyboards/kinesis/Makefile @@ -1,79 +1,3 @@ - -## Project specific files - -SRC= matrix.c - -# MCU name -MCU = at90usb1286 -#MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=1024 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming -CUSTOM_MATRIX=yes # need to do our own thing with the matrix - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk new file mode 100644 index 000000000..a4a2b7d15 --- /dev/null +++ b/keyboards/kinesis/rules.mk @@ -0,0 +1,73 @@ + +## Project specific files + +SRC= matrix.c + +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming +CUSTOM_MATRIX=yes # need to do our own thing with the matrix diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index b9f07636b..4e2a6f00f 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,78 +1,3 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= yes # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk new file mode 100644 index 000000000..6961fbd55 --- /dev/null +++ b/keyboards/lets_split/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes \ No newline at end of file diff --git a/keyboards/phantom/Makefile b/keyboards/phantom/Makefile index 3a71fd0ee..4e2a6f00f 100644 --- a/keyboards/phantom/Makefile +++ b/keyboards/phantom/Makefile @@ -1,74 +1,3 @@ - - -SRC = led.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/phantom/rules.mk b/keyboards/phantom/rules.mk new file mode 100644 index 000000000..c6b8ca6c3 --- /dev/null +++ b/keyboards/phantom/rules.mk @@ -0,0 +1,69 @@ + + +SRC = led.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/planck/Makefile b/keyboards/planck/Makefile index 23944f92e..7d49c5ef9 100644 --- a/keyboards/planck/Makefile +++ b/keyboards/planck/Makefile @@ -1,74 +1,5 @@ - SUBPROJECT_DEFAULT = rev4 -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk new file mode 100644 index 000000000..25db53a31 --- /dev/null +++ b/keyboards/planck/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/preonic/Makefile b/keyboards/preonic/Makefile index 08e9205cb..4e2a6f00f 100644 --- a/keyboards/preonic/Makefile +++ b/keyboards/preonic/Makefile @@ -1,73 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk new file mode 100644 index 000000000..d0f3a3a1c --- /dev/null +++ b/keyboards/preonic/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/retro_refit/Makefile b/keyboards/retro_refit/Makefile index 2dd8cc5f7..4e2a6f00f 100644 --- a/keyboards/retro_refit/Makefile +++ b/keyboards/retro_refit/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/retro_refit/rules.mk b/keyboards/retro_refit/rules.mk new file mode 100644 index 000000000..10fbfa5c9 --- /dev/null +++ b/keyboards/retro_refit/rules.mk @@ -0,0 +1,68 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile index 8b51d4609..4e2a6f00f 100644 --- a/keyboards/s60-x/Makefile +++ b/keyboards/s60-x/Makefile @@ -1,75 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/s60-x/rules.mk b/keyboards/s60-x/rules.mk new file mode 100644 index 000000000..7ec93933a --- /dev/null +++ b/keyboards/s60-x/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile index a0879fc9c..4e2a6f00f 100644 --- a/keyboards/satan/Makefile +++ b/keyboards/satan/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/satan/rules.mk b/keyboards/satan/rules.mk new file mode 100644 index 000000000..1102584d8 --- /dev/null +++ b/keyboards/satan/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/sixkeyboard/Makefile b/keyboards/sixkeyboard/Makefile index 6f273064a..4e2a6f00f 100644 --- a/keyboards/sixkeyboard/Makefile +++ b/keyboards/sixkeyboard/Makefile @@ -1,75 +1,3 @@ - - -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega16u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -CUSTOM_MATRIX = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif \ No newline at end of file diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk new file mode 100644 index 000000000..2c99985a9 --- /dev/null +++ b/keyboards/sixkeyboard/rules.mk @@ -0,0 +1,70 @@ + + +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega16u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +CUSTOM_MATRIX = yes \ No newline at end of file diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile index 45ca12780..4e2a6f00f 100644 --- a/keyboards/tv44/Makefile +++ b/keyboards/tv44/Makefile @@ -1,75 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= yes # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/tv44/rules.mk b/keyboards/tv44/rules.mk new file mode 100644 index 000000000..dbba6bace --- /dev/null +++ b/keyboards/tv44/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 -- cgit v1.2.3 From 051017c3129a17a1f4c610f19067c60bf0a49da9 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 18:38:03 +0300 Subject: Split subproject make files into Makefile and rules.mk --- keyboards/chibios_test/stm32_f072_onekey/Makefile | 42 +---------- keyboards/chibios_test/stm32_f072_onekey/rules.mk | 41 +++++++++++ keyboards/chibios_test/stm32_f103_onekey/Makefile | 53 +------------ keyboards/chibios_test/stm32_f103_onekey/rules.mk | 52 +++++++++++++ keyboards/chibios_test/teensy_lc_onekey/Makefile | 48 +----------- keyboards/chibios_test/teensy_lc_onekey/rules.mk | 49 ++++++++++++ keyboards/clueboard/rev1/Makefile | 6 +- keyboards/clueboard/rev1/rules.mk | 5 ++ keyboards/clueboard/rev2/Makefile | 6 +- keyboards/clueboard/rev2/rules.mk | 5 ++ keyboards/ergodox/ez/Makefile | 77 +------------------ keyboards/ergodox/ez/rules.mk | 76 +++++++++++++++++++ keyboards/ergodox/infinity/Makefile | 78 +------------------- keyboards/ergodox/infinity/rules.mk | 77 +++++++++++++++++++ keyboards/handwired/CMD60/Makefile | 74 +------------------ keyboards/handwired/CMD60/rules.mk | 73 ++++++++++++++++++ keyboards/handwired/fivethirteen/Makefile | 74 +------------------ keyboards/handwired/fivethirteen/rules.mk | 73 ++++++++++++++++++ keyboards/handwired/minorca/Makefile | 70 +----------------- keyboards/handwired/minorca/rules.mk | 67 +++++++++++++++++ keyboards/handwired/onekey/Makefile | 2 +- keyboards/handwired/onekey/rules.mk | 65 ++++++++++++++++ keyboards/handwired/traveller/Makefile | 90 +---------------------- keyboards/handwired/traveller/rules.mk | 89 ++++++++++++++++++++++ keyboards/planck/rev3/Makefile | 4 +- keyboards/planck/rev3/rules.mk | 5 ++ keyboards/planck/rev4/Makefile | 4 +- keyboards/planck/rev4/rules.mk | 5 ++ 28 files changed, 705 insertions(+), 605 deletions(-) create mode 100644 keyboards/chibios_test/stm32_f072_onekey/rules.mk create mode 100644 keyboards/chibios_test/stm32_f103_onekey/rules.mk create mode 100644 keyboards/chibios_test/teensy_lc_onekey/rules.mk create mode 100644 keyboards/clueboard/rev1/rules.mk create mode 100644 keyboards/clueboard/rev2/rules.mk create mode 100644 keyboards/ergodox/ez/rules.mk create mode 100644 keyboards/ergodox/infinity/rules.mk create mode 100644 keyboards/handwired/CMD60/rules.mk create mode 100644 keyboards/handwired/fivethirteen/rules.mk create mode 100644 keyboards/handwired/minorca/rules.mk create mode 100644 keyboards/handwired/onekey/rules.mk create mode 100644 keyboards/handwired/traveller/rules.mk create mode 100644 keyboards/planck/rev3/rules.mk create mode 100644 keyboards/planck/rev4/rules.mk (limited to 'keyboards/ergodox') diff --git a/keyboards/chibios_test/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile index eae38c4b2..191c6bb66 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile @@ -1,41 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/rules.mk b/keyboards/chibios_test/stm32_f072_onekey/rules.mk new file mode 100644 index 000000000..eae38c4b2 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/rules.mk @@ -0,0 +1,41 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F0xx +# linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = STM32F072xB +# startup code to use +# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f0xx +# it should exist either in /os/hal/boards/ +# or /boards +BOARD = ST_STM32F072B_DISCOVERY +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m0 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 6 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# /tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + +# Build Options +# comment out to disable the options. +# +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile index 307ca5b19..191c6bb66 100644 --- a/keyboards/chibios_test/stm32_f103_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile @@ -1,52 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -# MAPLE MINI -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 -# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader -# BOARD = MAPLEMINI_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk new file mode 100644 index 000000000..307ca5b19 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/rules.mk @@ -0,0 +1,52 @@ +# project specific files +SRC = matrix.c \ + led.c + +# GENERIC STM32F103C8T6 board - stm32duino bootloader +OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 +MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader +BOARD = GENERIC_STM32_F103 + +# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) +# OPT_DEFS = +# MCU_LDSCRIPT = STM32F103x8 +# BOARD = GENERIC_STM32_F103 + +# MAPLE MINI +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 +# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader +# BOARD = MAPLEMINI_STM32_F103 + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F1xx +# linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# startup code to use +# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f1xx +# it should exist either in /os/hal/boards/ +# or /boards +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m3 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# /tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile index 43ea9d82d..191c6bb66 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/Makefile +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile @@ -1,49 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = KL2x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MKL26Z64 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = kl2x - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_LC - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m0plus - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/rules.mk b/keyboards/chibios_test/teensy_lc_onekey/rules.mk new file mode 100644 index 000000000..43ea9d82d --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/rules.mk @@ -0,0 +1,49 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = KL2x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MKL26Z64 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = kl2x + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = PJRC_TEENSY_LC + +# Cortex version +# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 +MCU = cortex-m0plus + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile index 80a942d06..191c6bb66 100644 --- a/keyboards/clueboard/rev1/Makefile +++ b/keyboards/clueboard/rev1/Makefile @@ -1,5 +1,3 @@ -BACKLIGHT_ENABLE = no - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/clueboard/rev1/rules.mk b/keyboards/clueboard/rev1/rules.mk new file mode 100644 index 000000000..80a942d06 --- /dev/null +++ b/keyboards/clueboard/rev1/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile index cea967b79..191c6bb66 100644 --- a/keyboards/clueboard/rev2/Makefile +++ b/keyboards/clueboard/rev2/Makefile @@ -1,5 +1,3 @@ -BACKLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/clueboard/rev2/rules.mk b/keyboards/clueboard/rev2/rules.mk new file mode 100644 index 000000000..cea967b79 --- /dev/null +++ b/keyboards/clueboard/rev2/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 37e554b30..191c6bb66 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,76 +1,3 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- - -# # project specific files -SRC = twimaster.c \ - matrix.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk new file mode 100644 index 000000000..37e554b30 --- /dev/null +++ b/keyboards/ergodox/ez/rules.mk @@ -0,0 +1,76 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- + +# # project specific files +SRC = twimaster.c \ + matrix.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile index ccb735a48..191c6bb66 100644 --- a/keyboards/ergodox/infinity/Makefile +++ b/keyboards/ergodox/infinity/Makefile @@ -1,77 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader -# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX256BLDR8 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity 60% -# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox -MCU_STARTUP = k20x7 - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -#BOARD = MCHCK_K20 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 - -# Build Options -# comment out to disable the options. -# -CUSTOM_MATRIX ?= yes # Custom matrix file -SERIAL_LINK_ENABLE = yes -VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile -LCD_ENABLE ?= yes -LED_ENABLE ?= yes -LCD_BACKLIGHT_ENABLE ?= yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - -ifdef LCD_ENABLE -include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk -endif - -ifdef LED_ENABLE -include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk -endif +endif \ No newline at end of file diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk new file mode 100644 index 000000000..ccb735a48 --- /dev/null +++ b/keyboards/ergodox/infinity/rules.mk @@ -0,0 +1,77 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader +# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX256BLDR8 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity 60% +# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox +MCU_STARTUP = k20x7 + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +#BOARD = MCHCK_K20 +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 + +# Build Options +# comment out to disable the options. +# +CUSTOM_MATRIX ?= yes # Custom matrix file +SERIAL_LINK_ENABLE = yes +VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile +LCD_ENABLE ?= yes +LED_ENABLE ?= yes +LCD_BACKLIGHT_ENABLE ?= yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +ifdef LCD_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk +endif + +ifdef LED_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk +endif diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile index 711759917..191c6bb66 100644 --- a/keyboards/handwired/CMD60/Makefile +++ b/keyboards/handwired/CMD60/Makefile @@ -1,73 +1,3 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/handwired/CMD60/rules.mk b/keyboards/handwired/CMD60/rules.mk new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/CMD60/rules.mk @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/fivethirteen/Makefile b/keyboards/handwired/fivethirteen/Makefile index 711759917..191c6bb66 100644 --- a/keyboards/handwired/fivethirteen/Makefile +++ b/keyboards/handwired/fivethirteen/Makefile @@ -1,73 +1,3 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - - +endif \ No newline at end of file diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/minorca/Makefile b/keyboards/handwired/minorca/Makefile index 155c1f9a2..191c6bb66 100644 --- a/keyboards/handwired/minorca/Makefile +++ b/keyboards/handwired/minorca/Makefile @@ -1,71 +1,3 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk new file mode 100644 index 000000000..c51371a78 --- /dev/null +++ b/keyboards/handwired/minorca/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile index 4e2a6f00f..191c6bb66 100644 --- a/keyboards/handwired/onekey/Makefile +++ b/keyboards/handwired/onekey/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED - include ../../Makefile + include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk new file mode 100644 index 000000000..c6d10856a --- /dev/null +++ b/keyboards/handwired/onekey/rules.mk @@ -0,0 +1,65 @@ + + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/traveller/Makefile b/keyboards/handwired/traveller/Makefile index 12a4b71f4..191c6bb66 100644 --- a/keyboards/handwired/traveller/Makefile +++ b/keyboards/handwired/traveller/Makefile @@ -1,89 +1,3 @@ - -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# for avr upload -USB ?= /dev/cu.usbmodem1421 -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER - ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# MCU name - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -RGBLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - -upload: build - $(ATREUS_UPLOAD_COMMAND) - +endif \ No newline at end of file diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk new file mode 100644 index 000000000..12a4b71f4 --- /dev/null +++ b/keyboards/handwired/traveller/rules.mk @@ -0,0 +1,89 @@ + +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# for avr upload +USB ?= /dev/cu.usbmodem1421 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# MCU name + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +upload: build + $(ATREUS_UPLOAD_COMMAND) + diff --git a/keyboards/planck/rev3/Makefile b/keyboards/planck/rev3/Makefile index 3ed1445e4..191c6bb66 100644 --- a/keyboards/planck/rev3/Makefile +++ b/keyboards/planck/rev3/Makefile @@ -1,5 +1,3 @@ -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk new file mode 100644 index 000000000..3ed1445e4 --- /dev/null +++ b/keyboards/planck/rev3/rules.mk @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/planck/rev4/Makefile b/keyboards/planck/rev4/Makefile index ed09f85a4..191c6bb66 100644 --- a/keyboards/planck/rev4/Makefile +++ b/keyboards/planck/rev4/Makefile @@ -1,5 +1,3 @@ -AUDIO_ENABLE ?= yes # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif \ No newline at end of file diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk new file mode 100644 index 000000000..ed09f85a4 --- /dev/null +++ b/keyboards/planck/rev4/rules.mk @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file -- cgit v1.2.3 From da226e61261e0c11e678d2086c00b2a45726083e Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sat, 20 Aug 2016 03:22:16 +0300 Subject: Update keyboard readme files with new makefile instructions --- keyboards/arrow_pad/readme.md | 8 +++++--- keyboards/atomic/readme.md | 7 ++++--- keyboards/atreus/readme.md | 7 ++++--- keyboards/bantam44/readme.md | 7 ++++--- keyboards/clueboard/readme.md | 26 +++++++++++++------------- keyboards/cluecard/readme.md | 6 +++--- keyboards/ergodox/readme.md | 6 +++--- keyboards/gh60/readme.md | 8 +++++--- keyboards/hhkb/readme.md | 8 +++++--- keyboards/kc60/readme.md | 10 ++++++---- keyboards/kinesis/readme.md | 6 +++--- keyboards/planck/readme.md | 8 +++++--- keyboards/preonic/readme.md | 8 +++++--- keyboards/retro_refit/readme.md | 8 +++++--- keyboards/s60-x/readme.md | 4 ++-- keyboards/tv44/readme.md | 6 +++--- 16 files changed, 75 insertions(+), 58 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md index 5aa44cce5..2e9a64f2e 100644 --- a/keyboards/arrow_pad/readme.md +++ b/keyboards/arrow_pad/readme.md @@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/arrow_pad fol Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md index ab1e7ba1f..674dcf113 100644 --- a/keyboards/atomic/readme.md +++ b/keyboards/atomic/readme.md @@ -13,13 +13,14 @@ Download or clone the whole firmware and navigate to the keyboards/atomic folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 734f58f0f..a4077668e 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -174,13 +174,14 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md index 89d7f9d05..462f67c12 100644 --- a/keyboards/bantam44/readme.md +++ b/keyboards/bantam44/readme.md @@ -12,13 +12,14 @@ Download or clone the whole firmware and navigate to the keyboards/Bantam44 fold Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md index 6c29c09ec..4a76e2908 100644 --- a/keyboards/clueboard/readme.md +++ b/keyboards/clueboard/readme.md @@ -31,36 +31,36 @@ If you would like to use one of the alternative keymaps, or create your own, see ## Clueboard 1.0 -If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `SUBPROJECT=rev1` to your make command, like this: +If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this: ``` -$ make SUBPROJECT=rev1 +$ make rev1 ``` And when flashing your keyboard: ``` -$ make SUBPROJECT=rev1 dfu +$ make rev1-dfu ``` -If you are flashing an alternative layout to your rev1, include both `SUBPROJECT=rev1` and `KEYMAP=` in your command, for example when flashing max: +If you are flashing an alternative layout to your rev1, include both `rev1` and `` in your command, for example when flashing max: ``` -$ make SUBPROJECT=rev1 KEYMAP=max dfu +$ make rev1-max-dfu ``` ## Alternate Keymaps -There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `KEYMAP=` to your command: +There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `` to your command: ``` -$ make KEYMAP=skully +$ make skully ``` -And when flashing your keyboard, put `KEYMAP=` between "make" and "dfu": +And when flashing your keyboard, put `` between "make" and "dfu": ``` -$ make KEYMAP=skully dfu +$ make skully-dfu ``` ### Notable Layouts @@ -76,15 +76,15 @@ These layouts are notable for one reason or another. If you are looking for idea There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: * Copy `[keymaps/default](keymaps/default/)` to `keymaps/`. -* Compile the firmware (`$ make KEYMAP=`) -* Flash the firmware (`$ make KEYMAP= dfu`) +* Compile the firmware (`$ make `) +* Flash the firmware (`$ make -dfu`) * Make sure everything works like the default keyboard * Modify `keymaps//readme.md` to tell others about your layout. * Modify `keymaps//keymap.c` to reflect your desired layout. -* Compile your new custom firmware (`$ make KEYMAP=`) +* Compile your new custom firmware (`$ make `) ** If you have warnings you may flash without fixing them, but something may not work right. ** If you have any errors you must fix them before continuing. -* Flash the firmware (`$ make KEYMAP= dfu`) +* Flash the firmware (`$ make -dfu`) ## Share Your Keymap diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md index ae1afbbfd..be13fc017 100644 --- a/keyboards/cluecard/readme.md +++ b/keyboards/cluecard/readme.md @@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index f81d7cd8d..a96e415de 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -19,10 +19,10 @@ If you are just compiling an existing keymap and don't want to create your own, 3. Set up a build environment as per the readme. 4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) 5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. -6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. -7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. +6. Compile your firmware by running `make keymap_name`. For example, `make german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `infinity` to the make command like this `make infinity-german`. +7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make keymap_name-teensy`. - **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` + **Infinity ErgoDox** - Flash the firmware by running `make infinity-keymap_name-dfu-util` 8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. Good luck! :) diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md index 92302d507..20afb0db0 100644 --- a/keyboards/gh60/readme.md +++ b/keyboards/gh60/readme.md @@ -48,13 +48,15 @@ Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c fo Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md index 39d49b32a..367c0a08f 100644 --- a/keyboards/hhkb/readme.md +++ b/keyboards/hhkb/readme.md @@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md index acc0df68d..0639512dd 100644 --- a/keyboards/kc60/readme.md +++ b/keyboards/kc60/readme.md @@ -10,18 +10,20 @@ Download or clone the whole firmware and navigate to the keyboards/kc60 folder. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ## WS2812 Support ![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg) -Build with WS2812 Support by running `make KEYMAP=ws2812`. +Build with WS2812 Support by running `make ws2812`. diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md index a990f9cb9..79c86581e 100644 --- a/keyboards/kinesis/readme.md +++ b/keyboards/kinesis/readme.md @@ -27,16 +27,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md index f89fdeb93..4b24a690e 100644 --- a/keyboards/planck/readme.md +++ b/keyboards/planck/readme.md @@ -13,15 +13,17 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ### Notable forks (which some of the keymap files are from) diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md index f0be255a0..10763ee97 100644 --- a/keyboards/preonic/readme.md +++ b/keyboards/preonic/readme.md @@ -13,13 +13,15 @@ Download or clone the whole firmware and navigate to the keyboards/preonic folde Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap, create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/retro_refit/readme.md b/keyboards/retro_refit/readme.md index b01a1a9ca..77df861ce 100644 --- a/keyboards/retro_refit/readme.md +++ b/keyboards/retro_refit/readme.md @@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/retro_refit f Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md index 099d58699..94ce82922 100644 --- a/keyboards/s60-x/readme.md +++ b/keyboards/s60-x/readme.md @@ -42,9 +42,9 @@ The recommended programs for flashing your keyboard are [Atmel FLIP](http://www. ## Building the firmware -To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] + $ make [custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started). diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md index e3b557fe2..4f691a4ca 100644 --- a/keyboards/tv44/readme.md +++ b/keyboards/tv44/readme.md @@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` \ No newline at end of file -- cgit v1.2.3 From a25480b3b58f1fb779fe6d441023eeb3c72811f5 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 20:55:50 -0600 Subject: Bringing over changes from default map. --- keyboards/ergodox/keymaps/jafo/keymap.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/jafo/keymap.c b/keyboards/ergodox/keymaps/jafo/keymap.c index c5f21bd82..4f1428f2b 100644 --- a/keyboards/ergodox/keymaps/jafo/keymap.c +++ b/keyboards/ergodox/keymaps/jafo/keymap.c @@ -1,6 +1,7 @@ -#include "ergodox_ez.h" +#include "ergodox.h" #include "debug.h" #include "action_layer.h" +#include "version.h" #define BASE 0 // default layer #define SYMB 1 // symbols @@ -145,9 +146,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) switch(id) { case 0: if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); } break; } -- cgit v1.2.3 From 9e03517ae51ff30d332accae27469ae3b1b25e73 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 21:47:00 -0600 Subject: Restructuring of the ergodox README. --- keyboards/ergodox/readme.md | 134 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 105 insertions(+), 29 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 1c1181dba..1627883c9 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,44 +1,121 @@ -# Infinity on Ubuntu Quickstart +# Customizing Keymap -To build an Infinity firmware under Ubuntu (tested on 15.10): +There are external tools for customizing the layout, but those do not use +the featurs of this qmk firmware. These sites include: + + - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez + - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files + +You can also find an existing firmware that you like, for example from: + + - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) + +This qmk firmware also provides the ability to customize keymaps, but requires +a toolchain to build the firmware. See below for instructions on building +firmware and customizing keymaps. + +# Customizing Keymaps + +There are many existing keymaps in the "keymaps" directory. If you just want +to use one of them, you don't need to modify keymaps and can just build and +flash the firmware as described below. These directories each have a +"readme.md" file which describe them. + +If none of the existing keymaps suit you, you can create your own custom +keymap. This will require some experience with coding. Follow these steps +to customize a keymap: + + - Read the [qmk firmware README](https://github.com/jackhumbert/qmk_firmware) from top to bottom. Then come back here. :) + + - Clone the qmk_firmware repository + + - Set up your build environment (see below). + + - Make a new directory under "keymaps" to hold your customizations. + + - Copy an existing keymap that is close to what you want, such as + "keymaps/default/keymap.c". + + - Use an editor to modify the new "keymap.c". See "Finding the keycodes you + need" below). Try to edit the comments as well, so the "text graphics" + represent your layout correctly. + + - Compile your new firmware (see below) + + - Flash your firmware (see below) + + - Test the changes. + + - Submit your keymap as a pull request to the qmk_firmware repository so + others can use it. You will want to add a "readme.md" that describes the + keymap. + +# Build Dependencies + +Before you can build, you will need the build dependencies. There is a script +to try to do this for Linux: - Run the `util/install_dependencies.sh` script as root. - - Check out the submodules with `git submodule update --init --recursive` - - Go into the ErgoDox directory with `cd keyboards/ergodox` + +For the Infinity, you need the chibios submodules to be checked out or you +will receive errors about the build process being unable to find the chibios +files. Check them out with: + + - Go to the top level repo directory and run: `git submodule update --init --recursive` + +# Flashing Firmware + +## ErgoDox Ez + +The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). + +Linux users need to modify udev rules as described on the Teensy Linux page. +Some distributions provide a binary, maybe called `teensy-loader-cli`). + +To flash the firmware: + + - Build the firmware with `make keymap=keymapname`, for example `make + keymap=default` + + - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g. + `ergodox_ez_default.hex` + + - Start the teensy loader. + + - Load the .hex file into it. + + - Press the Reset button by inserting a paperclip gently into the reset hole + in the top right corder. + + - Click the button in the Teensy app to download the firmware. + +## ErgoDox Infinity + +The Infinity is two completely independent keyboards, and needs to be flashed +for the left and right halves seperately. To flash them: + + - Remove the build directory with `rm -rf ../../.build` + - Build the firmware with `make keymap=keymapname subproject=infinity` - - Plug in the left hand keyboard only. - - Press the program button (back of keyboard, above thumb pad). - - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` - - Install the right hand firmware, but I haven't figured this out yet. -# Getting started + - Plug in the left hand keyboard only. -There are two main ways you could customize the ErgoDox (EZ and Infinity) + - Press the program button (back of keyboard, above thumb pad). -## The Easy Way: Use an existing firmware file and just flash it (ErgoDox EZ only) + - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` -1. Download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). Some Linux distributions already provide a binary (may be called `teensy-loader-cli`), so you may prefer to use this. -2. Find a firmware file you like. There are [dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) you can browse and download. You can also use the [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) to create a firmware Hex file you like. -3. Download the firmware file -4. Connect the keyboard, press its Reset button (gently insert a paperclip into the hole in the top-right corner) and flash it using the Teensy loader you installed on step 1 and the firmware you downloaded. + - Remove the left-hand build with `rm -rf ../../.build` -## More technical: compile an existing keymap, or create your own totally custom firmware by editing the source files. + - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right` -This requires a little bit of familiarity with coding. -If you are just compiling an existing keymap and don't want to create your own, you can skip step 4, 5 and 8. + - Plug in the right hand keyboard only. -1. Go to https://github.com/jackhumbert/qmk_firmware and read the readme at the base of this repository, top to bottom. Then come back here :) -2. Clone the repository (download it) -3. Set up a build environment as per the readme. -4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) -5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. -6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. -7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. + - Press the program button (back of keyboard, above thumb pad). - **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` -8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. + - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity MASTER=right` -Good luck! :) +More information on the Infinity firmware is available in the [TMK/chibios for +Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) ## Contributing your keymap @@ -49,7 +126,6 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout. - ## Finding the keycodes you need Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. -- cgit v1.2.3 From d98e5ddf30e6ced925e3d4fa705ae5449808074b Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Fri, 19 Aug 2016 21:50:04 -0600 Subject: Tweaks after review. --- keyboards/ergodox/readme.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 1627883c9..349a0ce40 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,4 +1,4 @@ -# Customizing Keymap +# Keymap Options There are external tools for customizing the layout, but those do not use the featurs of this qmk firmware. These sites include: @@ -117,7 +117,7 @@ for the left and right halves seperately. To flash them: More information on the Infinity firmware is available in the [TMK/chibios for Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) -## Contributing your keymap +# Contributing your keymap The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. @@ -126,7 +126,7 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout. -## Finding the keycodes you need +# Finding the keycodes you need Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. -- cgit v1.2.3 From 8f78ba1f739ac585d7b211bab473f6820452bc45 Mon Sep 17 00:00:00 2001 From: Nicholas Keene Date: Fri, 19 Aug 2016 23:38:13 -0500 Subject: The Ordinary Layout is boring because all the keys are where you expect them to be --- keyboards/ergodox/keymaps/ordinary/keymap.c | 118 ++++++++++----------- .../ergodox/keymaps/ordinary/ordinary-base.png | Bin 76549 -> 98200 bytes .../ergodox/keymaps/ordinary/ordinary-media.png | Bin 96205 -> 123435 bytes .../ergodox/keymaps/ordinary/ordinary-special.png | Bin 68418 -> 68292 bytes .../ergodox/keymaps/ordinary/ordinary-special.txt | 14 +-- .../ergodox/keymaps/ordinary/ordinary-symbol.png | Bin 73009 -> 101255 bytes .../ergodox/keymaps/ordinary/ordinary-symbol.txt | 12 +-- keyboards/ergodox/keymaps/ordinary/readme.md | 65 +++++------- 8 files changed, 98 insertions(+), 111 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c index eda45b7cb..302c41cc8 100644 --- a/keyboards/ergodox/keymaps/ordinary/keymap.c +++ b/keyboards/ergodox/keymaps/ordinary/keymap.c @@ -1,4 +1,4 @@ -#include "ergodox_ez.h" +#include "ergodox.h" #include "led.h" #include "debug.h" #include "action_layer.h" @@ -31,31 +31,31 @@ * If you use or modify this layout I would love to hear from you. * * Details: readme.md - * https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary + * https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary */ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/******* Base Layer ******************************************************************************************************** +/******* Base Layer **************************************************************************************************** * - * ,------------------------------------------------------. ,------------------------------------------------------. - * | Special `~ | 1 | 2 | 3 | 4 | 5 | ESC | | - | 6 | 7 | 8 | 9 | 0 | =+ Special | - * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| - * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | - * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| - * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | - * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| - * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | - * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' - * | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | Home | End | | Left | Right| - * ,------|------|------| |------+------+------. - * | | | PgUp | | Up | | | - * |Backsp| Del |------| |------| Enter| Space| - * | | | PgDn | | Down | | | - * `--------------------' `--------------------' + * ,------------------------------------------------------. ,------------------------------------------------------. + * | Special `~ | 1 | 2 | 3 | 4 | 5 | ESC | | - | 6 | 7 | 8 | 9 | 0 | =+ Special | + * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| + * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | + * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| + * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | + * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| + * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | + * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Home | End | | Left | Right| + * ,------|------|------| |------+------+------. + * | | | PgUp | | Up | | | + * |Backsp| Del |------| |------| Enter| Space| + * | | | PgDn | | Down | | | + * `--------------------' `--------------------' */ [BASE] = KEYMAP( // left hand @@ -67,37 +67,37 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_HOME,KC_END ,KC_PGUP ,KC_BSPC,KC_DEL ,KC_PGDN - // right hand - ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) - ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) - ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) - ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT - ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL - ,KC_LEFT ,KC_RGHT - ,KC_UP - ,KC_DOWN ,KC_ENT ,KC_SPC + // right hand + ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) + ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT + ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_DOWN ,KC_ENT ,KC_SPC ), -/******* Symbols Layer ***************************************************************************************************** +/******* Symbols Layer ************************************************************************************************* * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | Esc | | - | F6 | F7 | F8 | F9 | F10 | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | - * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| - * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | LCtrl | Meh |Hyper | LAlt | LGui | | 0 | . | = | + | Ent | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | Left | Right| | Home | End | - * ,------|------|------| |------+------+------. - * | | | Up | | PgUp | | | - * |Space |Enter |------| |------|BackSp| Del | - * | | | Down | | PgDn | | | - * `--------------------' `--------------------' + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | Esc | | - | F6 | F7 | F8 | F9 | F10 | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | + * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| + * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | 0 | . | = | + | Ent | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Left | Right| | Home | End | + * ,------|------|------| |------+------+------. + * | | | Up | | PgUp | | | + * |Space |Enter |------| |------|BackSp| Del | + * | | | Down | | PgDn | | | + * `--------------------' `--------------------' */ [SYMB] = KEYMAP( // left hand @@ -105,19 +105,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) ,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB -,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT ,KC_LGUI +,KC_LCTL ,KC_MEH ,KC_HYPR ,KC_LALT ,KC_LGUI ,KC_LEFT ,KC_RGHT ,KC_UP ,KC_SPC ,KC_ENT ,KC_DOWN - // right hand - ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS - ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS - ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS - ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS - ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT - ,KC_HOME ,KC_END - ,KC_PGUP - ,KC_PGDN ,KC_BSPC ,KC_DEL + // right hand + ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS + ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS + ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS + ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS + ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT + ,KC_HOME ,KC_END + ,KC_PGUP + ,KC_PGDN ,KC_BSPC ,KC_DEL ), /******* Media Layer ******************************************************************************************************* diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png index 7f8c1b5c1..831db4f5d 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png index bb78b7c7a..5ff3f5338 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png index 399c5fc75..4fb9d1d16 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt index 6f9d8ef04..97f40f9db 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt @@ -1,21 +1,21 @@ [{x:3.5,a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"_\n\n\n\n\n\n-"], [{y:-0.875,x:5.5,a:7},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], -[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#ff8500"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"{\n["], [{y:-0.875,x:5.5,a:7},"",{h:1.5},"",{x:4.5,h:1.5},"",""], -[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nLock"], -[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""], +[{y:-0.875,c:"#c6c600",t:"#002299",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.875,x:5.5},"",{x:6.5},""], -[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"], -[{y:-0.625,x:6.5,c:"#cccccc",a:7,h:1.5},"",{x:4.5,h:1.5},""], +[{y:-0.875,c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"], +[{y:-0.625,x:6.5,c:"#cccccc",t:"#000000",a:7,h:1.5},"",{x:4.5,h:1.5},""], [{y:-0.75,x:3.5},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.875,x:5.5},"",{x:6.5},""], -[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"], -[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""], +[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.75,x:0.5},"","",{x:14.5},"",""], [{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png index 48cda5f6b..dd9086329 100644 Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png differ diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt index 5c5bc155a..001bf370d 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt @@ -1,11 +1,11 @@ [{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"], [{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"], [{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"], -[{y:-0.875,c:"#dddd77",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#dddd77",w:1.5},"\n\nShift\n\n\n\n\nLock"], +[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"], [{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"], [{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"], [{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"], -[{y:-0.875,c:"#dddd77",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#dddd77",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#c6c600",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"], [{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"(",{x:10.5,c:"#89b087"},"5"], [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"], [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"], @@ -14,10 +14,10 @@ [{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"], [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"], [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"], -[{y:-0.875,c:"#dddd77",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#dddd77",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#c6c600",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."], -[{y:-0.875,x:2.5,c:"#c6c600"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="], -[{y:-0.75,x:0.5,c:"#c6c600"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"], +[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."], +[{y:-0.875,x:2.5,c:"#dddd77"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="], +[{y:-0.75,x:0.5,c:"#dddd77"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"], [{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"], [{h:2},"Space",{h:2},"Enter","Up"], [{x:2},"Down"], diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md index 21d40477c..9c5294c5b 100644 --- a/keyboards/ergodox/keymaps/ordinary/readme.md +++ b/keyboards/ergodox/keymaps/ordinary/readme.md @@ -10,66 +10,51 @@ no rights reserved, use for any purposes, credit me if you are a nice person ## The Base Layout ## -* The light blue keys are modifiers: traditional Control, Option, and Command keys, plus Hyper and Meh -* The dark blue keys are Shift keys: Capitals Shift (traditional shift), Symbol Shift, and Media Shift; plus a Shift Lock key -* Several dark blue keys double for entry of characters which would typically be in those locations -* The turquoise keys are text navigation and manipulation -* The red keys is Escape and it is always found in that location no matter what +* *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets). +* *Modifier Keys* are light yellow and in the traditional location: Control, Option, Command, plus Hyper and Meh. +* *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional shift) is found in the usual place and above that is found Symbol Shift, Media Shift, and Special Shift (Shift Lock). +* Several of the shift keys double for entry of characters which would typically be in those locations. +* *Thumb Keys* shown in orange are for text navigation and manipulation. +* *Escape* is red and it is always found in that location no matter what. ![Ordinary base layout](ordinary-base.png) -This layout puts the modifier keys along the bottom of the keyboard where they are on most keyboards. They are in the regular order, with the addition of Hyper and Meh keys. The modifier keys are all in the same place on all layers, although some layers also assign symbols on those buttons. On the outside edges are the Shift keys. The traditional shift key is called Capitals Shift and it is in the normal location. Above that are Symbols Shift and Media Shift. Each Shift key momentarily switches the layout to that layer, and if you use the Shift Lock button you can lock the layout to that layer. - -Touch typists will also find tilde, tab, equals/plus, slash/pipe, and quote/double-quote sharing space on those Shift keys where they would probably be on a common keyboard. Other than the turquoise keys the only buttons which move to new locations are the Brackets and Dash and Escape. Most touch typists dont touch-type brackets or dash anyway so only Escape really requires retraining of muscle memory, and see below for the Special Escape Sequence. - -The four big turquoise keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. +The four big orane keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code. ## The Symbols Layer ## -* The light green keys are the eponymous symbols -* The bright green keys are F-Keys -* The dark green keys constitute a number pad -* The turquoise keys are the *reverse* of the turquoise keys on the base layer +* *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe justapose each other. Pipe, slash, and backslash are arranged in a column. +* *F-Keys* are bright green and overlay the row of numerals. +* *Number pad* in dark green under the right hand includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads so that NumLock is not needed. +* *Thumb keys* on this layer are the *reverse* of the orange keys on the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be. ![Ordinary symbol layout](ordinary-symbol.png) -The Ergodox EZ ships with the "Coder Layer" which I like to call the Symbols layer. There are some significant improvements in The Ordinary Layout over the default layout. - -The symbol keys are mostly the same as on the default layout, which did a good job in this regard, but with a few enhancements: - -* Angle brackets on this layer mean that curly, square, and angle brackets are all available on different layers of the same two buttons. Also, they mean that all kinds of brackets, including parentheses, are available on both the Base and Symbols layers. -* The slash, backslash, and pipe characters are grouped together as a memory aid. -* The & and | symbols are juxtaposed as a memory aid - -The number pad area here, in green, includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads, because this layout does not use a Num Lock key to switch the buttons between numeric keycodes and navigational keycodes. See the explanation in The Media Layout section about navigation using these same buttons. - -Finally, consider the turquoise text-nav keys. Here in the Symbols layer, these are *reversed* from the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be. +The Symbols Layer is based on the Coder Layer from the default Ergodox EZ layout. I slightly rearranged the symbols, added some symbols, expanded the number pad, and straightened out the F-Keys. It's very handy to have the symbols directly underneath the normal typing keys. ## The Media Layer ## -* The dark orange keys on the left move the mouse cursor -* The dark orange keys on the right move the text cursor -* The light orange keys are for scrolling and paging -* The bright green keys are more F-keys -* The dark yellow keys signal Web and Audio applications -* The light yellow keys signal the operating system +* *Mouse Cursor Keys* are under the left hand, shown in dark blue. Diagonal keys won't automatically repeat unless combined with other keys. Buttons to left- middle- and right-click the mouse are also featured. +* *Text Cursor Keys* are under the right hand, shown in dark blue. They overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand. +* *Scrolling and Paging* keys are shown in light blue and have some useful redundancy across the layout. +* Higher-order *F-Keys* are shown in bright green overylaying the numerals. +* *Application Keys* to control web browsers and audio players are dark purple but don't get too excited because these have weak support on operating systems I've looked at. Good luck. +* The light purple keys are various operating system keys such as NumLock and Mute and a button to navigate to My Computer (usually your home dir). * The dark gray keys do nothing in case you bump them by accident ![Ordinary media layout](ordinary-media.png) -This layer was inspired by the Media layer on the Ergodox EZ but takes it farther. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents. +This layer is a substantial extension of the Media layer on the Ergodox EZ default layout. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents. -Moreover, the orange keys on the right overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand. - -Alas, the yellow keys have at best spotty success with common software. Good luck with those but don't expect too much. +Keys to directly interact with the operating system are also found on this layer, such as volume and shutdown. ## Switching Between Layers ## In addition to Symbols and Media there is the Capitals layer which is exactly the same as pressing the shift key. Each layer is accessed by a shift key on each edge of the keyboard and corresponds to one of the three LEDs on the keyboard: Capitals (red), Symbols (green), Media (blue). The color of a layer illuminates when the layer is active. -Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button. You can press the shift and shift-lock buttons in either order. +Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button. Multiple layers can be turned on at once. The Capitals layer will affect characters on other layers to capitalize. Other layers, however, don't 'mix': Symbols blankets the base layout; Media blankets Symbols. @@ -77,6 +62,8 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact ![Ordinary special layout](ordinary-special.png) +The Special Shift layer is mostly used to lock the shift keys but in order to make this layout more _ordinary_ there are a few special sequences which put some keys near their most common traditional locations. + ### Escape ### The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. @@ -85,7 +72,7 @@ The Ordinary layout offers as a consolation prize a Special sequence for Escape: ### Backspace ### -At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence, using the 0 key, to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. +At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence using the 0 key to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. ### Other Characters ### @@ -93,11 +80,11 @@ The Escape and Backspace special sequences are so useful why not have a few more **** -The Ordinary Layout for the Ergodox EZ keyboard, v4 +The Ordinary Layout for the Ergodox EZ keyboard, v4.20 Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother. Details: readme.md - https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary + https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary -- cgit v1.2.3 From 6a9a6b9477749d9fc80cad8f026140b52715b5ec Mon Sep 17 00:00:00 2001 From: Nicholas Keene Date: Fri, 19 Aug 2016 23:44:08 -0500 Subject: The Ordinary Layout is boring because all the keys are where you expect them to be --- keyboards/ergodox/keymaps/ordinary/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md index 9c5294c5b..820b80b45 100644 --- a/keyboards/ergodox/keymaps/ordinary/readme.md +++ b/keyboards/ergodox/keymaps/ordinary/readme.md @@ -19,7 +19,7 @@ no rights reserved, use for any purposes, credit me if you are a nice person ![Ordinary base layout](ordinary-base.png) -The four big orane keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. +The four big orange keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code. -- cgit v1.2.3 From aff792545d70fbf281e64757b74d0ed776187bb2 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Fri, 19 Aug 2016 22:30:34 -0700 Subject: Changed my keymap to match normal keymaps. --- keyboards/ergodox/keymaps/xyverz/keymap.c | 512 ++++++++++++------------------ 1 file changed, 198 insertions(+), 314 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c index 397c8566f..5927de33f 100644 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -45,331 +45,215 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_DV] = { // layer 0 : Dvorak -/* - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | - * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| - * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | LCtr | LAlt | | Ralt | RCtr | - * ,------|------|------| |------+------+------. - * | | | Home | | PgUp | | | - * | BkSp | Del |------| |------| Enter| Space| - * | | | End | | PgDn | | | - * `--------------------' `--------------------' +/* Layer 0 : Dvorak + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | P | Y | | | | F | G | C | R | L | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | ; | Q | J | K | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCTL | LALT | | RALT | RCTL | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' * */ -#ifdef SUBPROJECT_infinity // Infinity Ergodox - // left hand - {XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME}, - {XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END }, - {KC_6, MO(_KP), XXXXXXX, MO(_MD), KC_DEL }, - {KC_5, KC_Y, KC_I, KC_X, KC_BSPC}, - {KC_4, KC_P, KC_U, KC_K, KC_RGHT}, - {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT}, - {KC_2, KC_COMM, KC_O, KC_Q, KC_INS }, - {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV }, - {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI}, - - //Right Hand - {XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP}, - {XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN}, - {KC_ESC, MO(_MD), XXXXXXX, MO(_KP), KC_ENT }, - {KC_6, KC_F, KC_D, KC_B, KC_SPC }, - {KC_7, KC_G, KC_H, KC_M, KC_UP }, - {KC_8, KC_C, KC_T, KC_W, KC_DOWN}, - {KC_9, KC_R, KC_N, KC_V, KC_SLSH}, - {KC_0, KC_L, KC_S, KC_Z, KC_EQL }, - {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI} -#else // Ergodox and Ergodox EZ +[_DV] = KEYMAP( // left hand - {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX}, - {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END }, - {KC_2, KC_COMM, KC_O, KC_Q, KC_INS, KC_DEL }, - {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT, KC_BSPC}, - {KC_4, KC_P, KC_U, KC_K, KC_RGHT, KC_HOME}, - {KC_5, KC_Y, KC_I, KC_X, XXXXXXX, KC_LCTL}, - {KC_ESC, XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT}, - - // right hand - {KC_ESC, XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT}, - {KC_6, KC_F, KC_D, KC_B, XXXXXXX, KC_RCTL}, - {KC_7, KC_G, KC_H, KC_M, KC_UP, KC_PGUP}, - {KC_8, KC_C, KC_T, KC_W, KC_DOWN, KC_SPC }, - {KC_9, KC_R, KC_N, KC_V, KC_SLSH, KC_ENT }, - {KC_0, KC_L, KC_S, KC_Z, KC_EQL, KC_PGDN}, - {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, XXXXXXX} -#endif - }, - - -[_QW] = { // layer 1 : QWERTY -/* - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | - * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| - * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | LCtr | LAlt | | Ralt | RCtr | - * ,------|------|------| |------+------+------. - * | | | Home | | PgUp | | | - * | BkSp | Del |------| |------| Enter| Space| - * | | | End | | PgDn | | | - * `--------------------' `--------------------' + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(_MD), + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + XXXXXXX, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + MO(_KP), KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, + KC_RALT, KC_RCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), + + +/* Layer 1: QWERTY + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCTL | LALT | | RALT | RCTL | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' */ -#ifdef SUBPROJECT_infinity // Infinity Ergodox - // left hand - {XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME}, - {XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END }, - {KC_6, MO(_KP), XXXXXXX, MO(_MD), KC_DEL }, - {KC_5, KC_Y, KC_I, KC_X, KC_BSPC}, - {KC_4, KC_P, KC_U, KC_K, KC_RGHT}, - {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT}, - {KC_2, KC_COMM, KC_O, KC_Q, KC_INS }, - {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV }, - {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI}, - - //Right Hand - {XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP}, - {XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN}, - {KC_ESC, MO(_MD), XXXXXXX, MO(_KP), KC_ENT }, - {KC_6, KC_F, KC_D, KC_B, KC_SPC }, - {KC_7, KC_G, KC_H, KC_M, KC_UP }, - {KC_8, KC_C, KC_T, KC_W, KC_DOWN}, - {KC_9, KC_R, KC_N, KC_V, KC_SLSH}, - {KC_0, KC_L, KC_S, KC_Z, KC_EQL }, - {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI} -#else // Ergodox and Ergodox EZ +[_QW] = KEYMAP( // left hand - {KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX}, - {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, - {KC_2, KC_W, KC_S, KC_X, KC_INS, KC_DEL }, - {KC_3, KC_E, KC_D, KC_C, KC_LEFT, KC_BSPC}, - {KC_4, KC_R, KC_F, KC_V, KC_RGHT, KC_HOME}, - {KC_5, KC_T, KC_G, KC_B, XXXXXXX, KC_LCTL}, - {KC_ESC, XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT}, - - // right hand - {KC_ESC, XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT}, - {KC_6, KC_Y, KC_H, KC_N, XXXXXXX, KC_RCTL}, - {KC_7, KC_U, KC_J, KC_M, KC_UP, KC_PGUP}, - {KC_8, KC_I, KC_K, KC_COMM, KC_DOWN, KC_SPC }, - {KC_9, KC_O, KC_L, KC_DOT, KC_LBRC, KC_ENT }, - {KC_0, KC_P, KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN}, - {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX} -#endif - }, - - -[_CM] = { // layer 2 : Colemak -/* - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | - * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| - * | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | LCtr | LAlt | | Ralt | RCtr | - * ,------|------|------| |------+------+------. - * | | | Home | | PgUp | | | - * | BkSp | Del |------| |------| Enter| Space| - * | | | End | | PgDn | | | - * `--------------------' `--------------------' + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MD), + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + XXXXXXX, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MO(_KP), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI, + KC_LALT, KC_LCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), + + +/* Layer 2 : Colemak + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCTL | LALT | | RALT | RCTL | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' */ -#ifdef SUBPROJECT_infinity // Infinity Ergodox - // left hand - {XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME}, - {XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END }, - {KC_6, MO(_KP), XXXXXXX, MO(_MD), KC_DEL }, - {KC_5, KC_Y, KC_I, KC_X, KC_BSPC}, - {KC_4, KC_P, KC_U, KC_K, KC_RGHT}, - {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT}, - {KC_2, KC_COMM, KC_O, KC_Q, KC_INS }, - {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV }, - {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI}, - - //Right Hand - {XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP}, - {XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN}, - {KC_ESC, MO(_MD), XXXXXXX, MO(_KP), KC_ENT }, - {KC_6, KC_F, KC_D, KC_B, KC_SPC }, - {KC_7, KC_G, KC_H, KC_M, KC_UP }, - {KC_8, KC_C, KC_T, KC_W, KC_DOWN}, - {KC_9, KC_R, KC_N, KC_V, KC_SLSH}, - {KC_0, KC_L, KC_S, KC_Z, KC_EQL }, - {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI} -#else // Ergodox and Ergodox EZ +[_CM] = KEYMAP( // left hand - {KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, XXXXXXX}, - {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, - {KC_2, KC_W, KC_R, KC_X, KC_INS, KC_DEL }, - {KC_3, KC_F, KC_S, KC_C, KC_LEFT, KC_BSPC}, - {KC_4, KC_P, KC_T, KC_V, KC_RGHT, KC_HOME}, - {KC_5, KC_G, KC_D, KC_B, XXXXXXX, KC_LCTL}, - {KC_ESC, XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT}, - - // right hand - {KC_ESC, XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT}, - {KC_6, KC_J, KC_H, KC_K, XXXXXXX, KC_RCTL}, - {KC_7, KC_L, KC_N, KC_M, KC_UP, KC_PGUP}, - {KC_8, KC_U, KC_E, KC_COMM, KC_DOWN, KC_SPC }, - {KC_9, KC_Y, KC_I, KC_DOT, KC_LBRC, KC_ENT }, - {KC_0, KC_SCLN, KC_O, KC_SLSH, KC_RBRC, KC_PGDN}, - {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX} -#endif - }, - - -[_MD] = { // layer 3 : Media layer -/* - * ,--------------------------------------------------. ,--------------------------------------------------. - * | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, XXXXXXX, + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MD), + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + XXXXXXX, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + MO(_KP), KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI, + KC_LALT, KC_LCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), + + +/* Layer 3 : Media layer + * ,--------------------------------------------------. ,--------------------------------------------------. + * | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' */ -#ifdef SUBPROJECT_infinity // Infinity Ergodox - // left hand - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {KC_F11, _______, XXXXXXX, _______, _______}, - {KC_F5, _______, _______, _______, _______}, - {KC_F4, KC_PAUS, _______, COLEMAK, _______}, - {KC_F3, KC_SLCK, _______, QWERTY, _______}, - {KC_F2, KC_PSCR, _______, DVORAK, _______}, - {KC_F1, _______, _______, _______, _______}, - {RESET, _______, _______, _______, _______}, - - //Right Hand - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {KC_F12, _______, XXXXXXX, _______, _______}, - {KC_F6, _______, KC_MSTP, _______, _______}, - {KC_F7, KC_VOLU, KC_MPRV, _______, _______}, - {KC_F8, KC_VOLD, KC_MPLY, _______, _______}, - {KC_F9, KC_MUTE, KC_MNXT, _______, _______}, - {KC_F10, _______, KC_MSEL, _______, _______}, - {_______, _______, _______, _______, _______}, -#else // Ergodox and Ergodox EZ +[_MD] = KEYMAP( // left hand - {RESET, _______, _______, _______, _______, XXXXXXX}, - {KC_F1, _______, _______, _______, _______, _______}, - {KC_F2, KC_PSCR, _______, DVORAK, _______, _______}, - {KC_F3, KC_SLCK, _______, QWERTY, _______, _______}, - {KC_F4, KC_PAUS, _______, COLEMAK, _______, _______}, - {KC_F5, _______, _______, _______, XXXXXXX, _______}, - {KC_F11, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, - - // right hand - {KC_F12, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, - {KC_F6, _______, KC_MSTP, _______, XXXXXXX, _______}, - {KC_F7, KC_MUTE, KC_MPRV, _______, _______, _______}, - {KC_F8, KC_VOLD, KC_MPLY, _______, _______, _______}, - {KC_F9, KC_VOLU, KC_MNXT, _______, _______, _______}, - {KC_F10, _______, KC_MSEL, _______, _______, _______}, - {_______, _______, _______, _______, _______, XXXXXXX} -#endif - }, - - -[_KP] = { // layer 4 : Keypad layer -/* - * ,--------------------------------------------------. ,--------------------------------------------------. - * | Power | | | | | | | | | | NmLk | KP / | KP * | KP - | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | KP 0 | | KP . |KP Ent| | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, + _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, + KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSEL, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ + ), + + +/* Layer 4 : Keypad layer + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Power | | | | | | | | | | NmLk | KP = | KP / | KP * | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP - | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | KP 0 | | |KP Ent| | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' */ -#ifdef SUBPROJECT_infinity // Infinity Ergodox - // left hand - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {_______, _______, XXXXXXX, _______, _______}, - {_______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______}, - {KC_PWR, KC_SLEP, KC_WAKE, _______, _______}, - - //Right Hand - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {XXXXXXX, XXXXXXX, XXXXXXX, _______, _______}, - {_______, _______, XXXXXXX, _______, _______}, - {_______, _______, KC_MSTP, _______, _______}, - {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0 }, - {KC_PSLS, KC_P8, KC_P5, KC_P2, _______}, - {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT}, - {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT}, - {_______, _______, _______, _______, _______}, -#else // Ergodox and Ergodox EZ +[_KP] = KEYMAP( // left hand - {KC_PWR, KC_SLEP, KC_WAKE, _______, _______, XXXXXXX}, - {_______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, XXXXXXX, _______}, - {_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, - - // right hand - {_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______}, - {_______, _______, _______, _______, XXXXXXX, _______}, - {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, _______}, - {KC_PSLS, KC_P8, KC_P5, KC_P2, XXXXXXX, _______}, - {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, _______}, - {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, _______}, - {_______, _______, _______, _______, XXXXXXX, XXXXXXX} -#endif - }, - + KC_PWR, _______, _______, _______, _______, _______, _______, + KC_SLEP, _______, _______, _______, _______, _______, _______, + KC_WAKE, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + _______, _______, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, _______, + _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, + _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, + _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ + ), }; -- cgit v1.2.3 From e4984f65decbd005d147d29b56d7a0c7d7a8dafd Mon Sep 17 00:00:00 2001 From: Xyverz Date: Fri, 19 Aug 2016 22:45:20 -0700 Subject: Changed the Ergodox keymap to use the KEYMAP() macro, updated readme.md. --- keyboards/ergodox/keymaps/xyverz/keymap.c | 13 +++---------- keyboards/ergodox/keymaps/xyverz/readme.md | 14 +++++++------- 2 files changed, 10 insertions(+), 17 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c index 5927de33f..08ee5aeda 100644 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -1,8 +1,4 @@ /* - * PLEASE NOTE: This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity, - * simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file is untested - * on the Infinity ErgoDox. - * * About this keymap: * * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak @@ -14,9 +10,6 @@ * * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck * layouts. - * - * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the - * keymap is defined, beginning on line 81. * */ @@ -197,7 +190,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, + _______, _______, DVORAK, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -224,7 +217,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | KP 0 | | |KP Ent| | + * | | | | | | | KP 0 | | KP . |KP Ent| | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | | | | | | @@ -249,7 +242,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, - _______, _______, _______, _______, _______, + KC_P0, _______, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index e6cb582c5..6ecdabc9e 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -1,9 +1,5 @@ # Xyverz's ErgoDox EZ Keymap -## Please Note: - -This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity, simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file builds cleanly as is but as of this writing has not been tested on the Infinity ErgoDox. YMMV. - ## About this keymap: The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox. @@ -12,7 +8,11 @@ The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. -For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined beginning on line 81, or in ../../infinity/infinity.h beginning at line 72. +## Still to do: + + * Need to figure out a better position for the ESC key. + * Come up with a function for the empty keys shown in the alpha layers below. + * Fix the CapsLock, NumLock, and ScrLck LEDs. ### Layer 0: Dvorak layer @@ -103,9 +103,9 @@ For a better explanation of the layout matrices shown below, take a look at ../. ### Keymap 4: Keypad layer ,--------------------------------------------------.,--------------------------------------------------. - | Power | | | | | | || | | NmLk | KP / | KP * | KP - | | + | Power | | | | | | || | | NmLk | KP = | KP / | KP * | | |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| - | Sleep | | | | | | || | | KP 7 | KP 8 | KP 9 | KP + | | + | Sleep | | | | | | || | | KP 7 | KP 8 | KP 9 | KP - | | |--------+------+------+------+------+------| || |------+------+------+------+------+--------| | Wake | | | | | |------||------| | KP 4 | KP 5 | KP 6 | KP + | | |--------+------+------+------+------+------| || |------+------+------+------+------+--------| -- cgit v1.2.3 From 66adbfcab5c197f01ead2c07a79b25d2f2b93b1a Mon Sep 17 00:00:00 2001 From: Joe Wasson Date: Thu, 28 Jul 2016 01:25:29 -0700 Subject: Add default swap configs for a couple of boards. --- keyboards/ergodox/infinity/infinity.c | 24 ++++++++++++++++++++++++ keyboards/planck/planck.c | 10 ++++++++++ keyboards/preonic/preonic.c | 11 +++++++++++ 3 files changed, 45 insertions(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index f89e046d0..c5793385f 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -130,3 +130,27 @@ void ergodox_right_led_3_off(void){ void ergodox_right_led_off(uint8_t led){ } + +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}}, + {{0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}}, + {{0, 11}, {1, 11}, {2, 11}, {3, 11}, {4, 11}}, + {{0, 12}, {1, 12}, {2, 12}, {3, 12}, {4, 12}}, + {{0, 13}, {1, 13}, {2, 13}, {3, 13}, {4, 13}}, + {{0, 14}, {1, 14}, {2, 14}, {3, 14}, {4, 14}}, + {{0, 15}, {1, 15}, {2, 15}, {3, 15}, {4, 15}}, + {{0, 16}, {1, 16}, {2, 16}, {3, 16}, {4, 16}}, + {{0, 17}, {1, 17}, {2, 17}, {3, 17}, {4, 17}}, + {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}}, + {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}}, + {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}}, + {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}}, + {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}}, + {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}}, + {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}}, + {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}}, + {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}}, +}; +#endif diff --git a/keyboards/planck/planck.c b/keyboards/planck/planck.c index 8d70bb4e5..645b450d1 100644 --- a/keyboards/planck/planck.c +++ b/keyboards/planck/planck.c @@ -1,5 +1,15 @@ #include "planck.h" +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, +}; +#endif + void matrix_init_kb(void) { // Turn status LED on DDRE |= (1<<6); diff --git a/keyboards/preonic/preonic.c b/keyboards/preonic/preonic.c index 889c3fc8f..d9c119b8d 100644 --- a/keyboards/preonic/preonic.c +++ b/keyboards/preonic/preonic.c @@ -1,5 +1,16 @@ #include "preonic.h" +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, + {{11, 4}, {10, 4}, {9, 4}, {8, 4}, {7, 4}, {6, 4}, {5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}}, +}; +#endif + void matrix_init_kb(void) { // Turn status LED on -- cgit v1.2.3 From 0418ecc073d420fff3be2603bfb7a6fa234bd357 Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Mon, 22 Aug 2016 10:26:18 -0600 Subject: Changes from review by @fredizzimo and @Xyverz --- keyboards/ergodox/readme.md | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 349a0ce40..304f2b01f 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,18 +1,3 @@ -# Keymap Options - -There are external tools for customizing the layout, but those do not use -the featurs of this qmk firmware. These sites include: - - - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez - - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files - -You can also find an existing firmware that you like, for example from: - - - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) - -This qmk firmware also provides the ability to customize keymaps, but requires -a toolchain to build the firmware. See below for instructions on building -firmware and customizing keymaps. # Customizing Keymaps @@ -94,8 +79,6 @@ To flash the firmware: The Infinity is two completely independent keyboards, and needs to be flashed for the left and right halves seperately. To flash them: - - Remove the build directory with `rm -rf ../../.build` - - Build the firmware with `make keymap=keymapname subproject=infinity` - Plug in the left hand keyboard only. @@ -104,8 +87,6 @@ for the left and right halves seperately. To flash them: - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity` - - Remove the left-hand build with `rm -rf ../../.build` - - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right` - Plug in the right hand keyboard only. @@ -133,3 +114,19 @@ Let's say you want a certain key in your layout to send a colon; to figure out w That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot). If you want to send a plain vanilla key, you can look up its code under `doc/keycode.txt`. That's where all the boring keys hang out. + +# Other Firmware Options + +There are external tools for customizing the layout, but those do not use +the featurs of this qmk firmware. These sites include: + + - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez + - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files + +You can also find an existing firmware that you like, for example from: + + - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) + +This qmk firmware also provides the ability to customize keymaps, but requires +a toolchain to build the firmware. See below for instructions on building +firmware and customizing keymaps. -- cgit v1.2.3 From 86656690f12e98f7aa6c2faddbcef3b9bcdad35b Mon Sep 17 00:00:00 2001 From: Jason Green Date: Mon, 1 Aug 2016 18:28:21 +0000 Subject: TxBolt (Steno) Serial protocol for Ergodox Ez --- keyboards/ergodox/keymaps/steno/Makefile | 3 + keyboards/ergodox/keymaps/steno/keymap.c | 324 ++++++++++++++++++++++++++++++ keyboards/ergodox/keymaps/steno/readme.md | 92 +++++++++ 3 files changed, 419 insertions(+) create mode 100644 keyboards/ergodox/keymaps/steno/Makefile create mode 100644 keyboards/ergodox/keymaps/steno/keymap.c create mode 100644 keyboards/ergodox/keymaps/steno/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/steno/Makefile b/keyboards/ergodox/keymaps/steno/Makefile new file mode 100644 index 000000000..b6fb9b1a8 --- /dev/null +++ b/keyboards/ergodox/keymaps/steno/Makefile @@ -0,0 +1,3 @@ +VIRTSER_ENABLE = yes +# Not enough interupts, so something has to go +MOUSEKEY_ENABLE = no diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c new file mode 100644 index 000000000..f885ac575 --- /dev/null +++ b/keyboards/ergodox/keymaps/steno/keymap.c @@ -0,0 +1,324 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "lufa.h" +#include "sendchar.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define TXBOLT 3 // TxBolt Steno Virtual Serial +#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | TX | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | BOLT |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(TXBOLT), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | RESET | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +// TxBolt Codes +#define Sl 0b00000001 +#define Tl 0b00000010 +#define Kl 0b00000100 +#define Pl 0b00001000 +#define Wl 0b00010000 +#define Hl 0b00100000 +#define Rl 0b01000001 +#define Al 0b01000010 +#define Ol 0b01000100 +#define X 0b01001000 +#define Er 0b01010000 +#define Ur 0b01100000 +#define Fr 0b10000001 +#define Rr 0b10000010 +#define Pr 0b10000100 +#define Br 0b10001000 +#define Lr 0b10010000 +#define Gr 0b10100000 +#define Tr 0b11000001 +#define Sr 0b11000010 +#define Dr 0b11000100 +#define Zr 0b11001000 +#define NM 0b11010000 +#define GRPMASK 0b11000000 +#define GRP0 0b00000000 +#define GRP1 0b01000000 +#define GRP2 0b10000000 +#define GRP3 0b11000000 +/* Keymap 3: TxBolt (Serial) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | BKSPC | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | T | P | H | * |------| |------| * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * | | | | * | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// TxBolt over Serial +[TXBOLT] = KEYMAP( + KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, + KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), + KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + M(Al), M(Ol), KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), + M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), + KC_NO, M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, M(Er), M(Ur) +), +/* Keymap 4: TxBolt (Serial) Alternative + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | S | T | P | H | * | | | | * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * |------| |------| * | R | B | G | S | Z | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | A | O | | E | U | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// TxBolt over Serial +[TXBOLT2] = KEYMAP( + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, + KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), KC_NO, + KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, M(Al), M(Ol), + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO, + // right hand + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), + KC_TRNS, M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), + M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + M(Er), M(Ur), KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +uint8_t chord[4] = {0,0,0,0}; +uint8_t pressed_count = 0; + +void send_chord(void) +{ + for(uint8_t i = 0; i < 4; i++) + { + if(chord[i]) + virtser_send(chord[i]); + } + virtser_send(0); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + // We need to track keypresses in all modes, in case the user + // changes mode whilst pressing other keys. + if (record->event.pressed) + pressed_count++; + else + pressed_count--; + return true; +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + + if (record->event.pressed) { + uint8_t grp = (id & GRPMASK) >> 6; + chord[grp] |= id; + } + else { + if (pressed_count == 0) { + send_chord(); + chord[0] = chord[1] = chord[2] = chord[3] = 0; + } + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/steno/readme.md b/keyboards/ergodox/keymaps/steno/readme.md new file mode 100644 index 000000000..d67cde2a3 --- /dev/null +++ b/keyboards/ergodox/keymaps/steno/readme.md @@ -0,0 +1,92 @@ +# ErgoDox EZ Steno Configuration + +This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function. + +In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers. + +

+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 2: Media keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 3: TxBolt (Serial)
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|   E  |   U  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+
-- cgit v1.2.3 From ec62cbe384c7366b90e913d83bed3ba3325406df Mon Sep 17 00:00:00 2001 From: Jason Green Date: Tue, 23 Aug 2016 04:32:40 +0000 Subject: add missing #include --- keyboards/ergodox/keymaps/steno/keymap.c | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c index f885ac575..399059d5f 100644 --- a/keyboards/ergodox/keymaps/steno/keymap.c +++ b/keyboards/ergodox/keymaps/steno/keymap.c @@ -3,6 +3,7 @@ #include "action_layer.h" #include "lufa.h" #include "sendchar.h" +#include "virtser.h" #define BASE 0 // default layer #define SYMB 1 // symbols -- cgit v1.2.3 From 104ca8a5e1a9f3a30c0fa149556b5424684905dd Mon Sep 17 00:00:00 2001 From: Jason Green Date: Tue, 23 Aug 2016 04:49:05 +0000 Subject: Remove unneeded include --- keyboards/ergodox/keymaps/steno/keymap.c | 1 - 1 file changed, 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c index 399059d5f..3e9830905 100644 --- a/keyboards/ergodox/keymaps/steno/keymap.c +++ b/keyboards/ergodox/keymaps/steno/keymap.c @@ -1,7 +1,6 @@ #include "ergodox.h" #include "debug.h" #include "action_layer.h" -#include "lufa.h" #include "sendchar.h" #include "virtser.h" -- cgit v1.2.3 From 7009112752ed0729b9c20382c936a8d373062ada Mon Sep 17 00:00:00 2001 From: Jason Green Date: Tue, 23 Aug 2016 07:02:44 +0000 Subject: move to ergodox-ez only --- keyboards/ergodox/ez/keymaps/steno/Makefile | 3 + keyboards/ergodox/ez/keymaps/steno/keymap.c | 324 +++++++++++++++++++++++++++ keyboards/ergodox/ez/keymaps/steno/readme.md | 92 ++++++++ keyboards/ergodox/keymaps/steno/Makefile | 3 - keyboards/ergodox/keymaps/steno/keymap.c | 324 --------------------------- keyboards/ergodox/keymaps/steno/readme.md | 92 -------- tmk_core/protocol/lufa/lufa.c | 2 +- 7 files changed, 420 insertions(+), 420 deletions(-) create mode 100644 keyboards/ergodox/ez/keymaps/steno/Makefile create mode 100644 keyboards/ergodox/ez/keymaps/steno/keymap.c create mode 100644 keyboards/ergodox/ez/keymaps/steno/readme.md delete mode 100644 keyboards/ergodox/keymaps/steno/Makefile delete mode 100644 keyboards/ergodox/keymaps/steno/keymap.c delete mode 100644 keyboards/ergodox/keymaps/steno/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ez/keymaps/steno/Makefile b/keyboards/ergodox/ez/keymaps/steno/Makefile new file mode 100644 index 000000000..b6fb9b1a8 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/steno/Makefile @@ -0,0 +1,3 @@ +VIRTSER_ENABLE = yes +# Not enough interupts, so something has to go +MOUSEKEY_ENABLE = no diff --git a/keyboards/ergodox/ez/keymaps/steno/keymap.c b/keyboards/ergodox/ez/keymaps/steno/keymap.c new file mode 100644 index 000000000..3e9830905 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/steno/keymap.c @@ -0,0 +1,324 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "sendchar.h" +#include "virtser.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define TXBOLT 3 // TxBolt Steno Virtual Serial +#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | TX | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | BOLT |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(TXBOLT), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | RESET | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +// TxBolt Codes +#define Sl 0b00000001 +#define Tl 0b00000010 +#define Kl 0b00000100 +#define Pl 0b00001000 +#define Wl 0b00010000 +#define Hl 0b00100000 +#define Rl 0b01000001 +#define Al 0b01000010 +#define Ol 0b01000100 +#define X 0b01001000 +#define Er 0b01010000 +#define Ur 0b01100000 +#define Fr 0b10000001 +#define Rr 0b10000010 +#define Pr 0b10000100 +#define Br 0b10001000 +#define Lr 0b10010000 +#define Gr 0b10100000 +#define Tr 0b11000001 +#define Sr 0b11000010 +#define Dr 0b11000100 +#define Zr 0b11001000 +#define NM 0b11010000 +#define GRPMASK 0b11000000 +#define GRP0 0b00000000 +#define GRP1 0b01000000 +#define GRP2 0b10000000 +#define GRP3 0b11000000 +/* Keymap 3: TxBolt (Serial) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | BKSPC | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | T | P | H | * |------| |------| * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * | | | | * | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// TxBolt over Serial +[TXBOLT] = KEYMAP( + KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, + KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), + KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + M(Al), M(Ol), KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), + M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), + KC_NO, M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, M(Er), M(Ur) +), +/* Keymap 4: TxBolt (Serial) Alternative + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | S | T | P | H | * | | | | * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * |------| |------| * | R | B | G | S | Z | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | A | O | | E | U | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// TxBolt over Serial +[TXBOLT2] = KEYMAP( + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, + KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), KC_NO, + KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, M(Al), M(Ol), + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO, + // right hand + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), + KC_TRNS, M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), + M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + M(Er), M(Ur), KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +uint8_t chord[4] = {0,0,0,0}; +uint8_t pressed_count = 0; + +void send_chord(void) +{ + for(uint8_t i = 0; i < 4; i++) + { + if(chord[i]) + virtser_send(chord[i]); + } + virtser_send(0); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + // We need to track keypresses in all modes, in case the user + // changes mode whilst pressing other keys. + if (record->event.pressed) + pressed_count++; + else + pressed_count--; + return true; +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + + if (record->event.pressed) { + uint8_t grp = (id & GRPMASK) >> 6; + chord[grp] |= id; + } + else { + if (pressed_count == 0) { + send_chord(); + chord[0] = chord[1] = chord[2] = chord[3] = 0; + } + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/steno/readme.md b/keyboards/ergodox/ez/keymaps/steno/readme.md new file mode 100644 index 000000000..d67cde2a3 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/steno/readme.md @@ -0,0 +1,92 @@ +# ErgoDox EZ Steno Configuration + +This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function. + +In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers. + +

+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 2: Media keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 3: TxBolt (Serial)
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|   E  |   U  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+
diff --git a/keyboards/ergodox/keymaps/steno/Makefile b/keyboards/ergodox/keymaps/steno/Makefile deleted file mode 100644 index b6fb9b1a8..000000000 --- a/keyboards/ergodox/keymaps/steno/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -VIRTSER_ENABLE = yes -# Not enough interupts, so something has to go -MOUSEKEY_ENABLE = no diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c deleted file mode 100644 index 3e9830905..000000000 --- a/keyboards/ergodox/keymaps/steno/keymap.c +++ /dev/null @@ -1,324 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" -#include "sendchar.h" -#include "virtser.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys -#define TXBOLT 3 // TxBolt Steno Virtual Serial -#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | TX | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | BOLT |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | | | Home | | PgUp | | | - * | Space|Backsp|------| |------| Tab |Enter | - * | |ace | End | | PgDn | | | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP( // layer 0 : default - // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(TXBOLT), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP( - // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | RESET | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | |Brwser| - * | | |------| |------| |Back | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[MDIA] = KEYMAP( - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -// TxBolt Codes -#define Sl 0b00000001 -#define Tl 0b00000010 -#define Kl 0b00000100 -#define Pl 0b00001000 -#define Wl 0b00010000 -#define Hl 0b00100000 -#define Rl 0b01000001 -#define Al 0b01000010 -#define Ol 0b01000100 -#define X 0b01001000 -#define Er 0b01010000 -#define Ur 0b01100000 -#define Fr 0b10000001 -#define Rr 0b10000010 -#define Pr 0b10000100 -#define Br 0b10001000 -#define Lr 0b10010000 -#define Gr 0b10100000 -#define Tr 0b11000001 -#define Sr 0b11000010 -#define Dr 0b11000100 -#define Zr 0b11001000 -#define NM 0b11010000 -#define GRPMASK 0b11000000 -#define GRP0 0b00000000 -#define GRP1 0b01000000 -#define GRP2 0b10000000 -#define GRP3 0b11000000 -/* Keymap 3: TxBolt (Serial) - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | BKSPC | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | # | # | # | # | # | | | | # | # | # | # | # | # | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | S | T | P | H | * |------| |------| * | F | P | L | T | D | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | S | K | W | R | * | | | | * | R | B | G | S | Z | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | A | O |------| |------| E | U | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// TxBolt over Serial -[TXBOLT] = KEYMAP( - KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, - KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), - KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - M(Al), M(Ol), KC_NO, - // right hand - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_TRNS, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), - M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), - KC_NO, M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - KC_NO, M(Er), M(Ur) -), -/* Keymap 4: TxBolt (Serial) Alternative - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | # | # | # | # | # | | | | # | # | # | # | # | # | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | S | T | P | H | * | | | | * | F | P | L | T | D | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | S | K | W | R | * |------| |------| * | R | B | G | S | Z | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | A | O | | E | U | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// TxBolt over Serial -[TXBOLT2] = KEYMAP( - KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, - KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), KC_NO, - KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, M(Al), M(Ol), - KC_NO, KC_NO, - KC_NO, - KC_NO, KC_NO, KC_NO, - // right hand - KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), - KC_TRNS, M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), - M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - M(Er), M(Ur), KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - KC_NO, KC_NO, KC_NO -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -uint8_t chord[4] = {0,0,0,0}; -uint8_t pressed_count = 0; - -void send_chord(void) -{ - for(uint8_t i = 0; i < 4; i++) - { - if(chord[i]) - virtser_send(chord[i]); - } - virtser_send(0); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) -{ - // We need to track keypresses in all modes, in case the user - // changes mode whilst pressing other keys. - if (record->event.pressed) - pressed_count++; - else - pressed_count--; - return true; -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - - if (record->event.pressed) { - uint8_t grp = (id & GRPMASK) >> 6; - chord[grp] |= id; - } - else { - if (pressed_count == 0) { - send_chord(); - chord[0] = chord[1] = chord[2] = chord[3] = 0; - } - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; diff --git a/keyboards/ergodox/keymaps/steno/readme.md b/keyboards/ergodox/keymaps/steno/readme.md deleted file mode 100644 index d67cde2a3..000000000 --- a/keyboards/ergodox/keymaps/steno/readme.md +++ /dev/null @@ -1,92 +0,0 @@ -# ErgoDox EZ Steno Configuration - -This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function. - -In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers. - -

-/* Keymap 0: Basic layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
- * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
- * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
- * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
- *                                 ,------|------|------|       |------+--------+------.
- *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |      |ace   | End  |       | PgDn |        |      |
- *                                 `--------------------'       `----------------------'
- */
-/* Keymap 1: Symbol Layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-/* Keymap 2: Media keys
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |  Play  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |VolUp |VolDn | Mute |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-/* Keymap 3: TxBolt (Serial)
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |   A  |   O  |------|       |------|   E  |   U  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-
diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index af73f34d7..9b201374a 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -881,7 +881,7 @@ void virtser_init(void) CDC_Device_SendControlLineStateChange(&cdc_device); } -__attribute__ ((weak)) +void virtser_recv(uint8_t c) __attribute__ ((weak)); void virtser_recv(uint8_t c) { // Ignore by default -- cgit v1.2.3 From 7debe7cd777f50ef0adf4d3b4623946232f1eccf Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Wed, 24 Aug 2016 09:26:41 -0600 Subject: Changes based on @fredizzimo review, flashing Infinity details --- keyboards/ergodox/readme.md | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 304f2b01f..4730de36f 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,3 +1,15 @@ +# The Easy Way + +If you can find firmware someone else has made that does what you want, that +is the easiest way to customize your ErgoDox. It requires no programming +experience or the setup of a build environment. + +Quickstart: + + - Find and download an [existing firmware](#other-firmware-options) + + - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez) + or [ErgoDox Infinity](#ergodox-infinity) # Customizing Keymaps @@ -98,6 +110,28 @@ for the left and right halves seperately. To flash them: More information on the Infinity firmware is available in the [TMK/chibios for Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) +### Infinity Master/Two Halves + +The Infinity is two completely independent keyboards, that can connect together. +You have a few options in how you flash the firmware: + +- Flash the left half, rebuild the firmware with "MASTER=right" and then flash + the right half. This allows you to plug in either half directly to the + computer and is what the above instructions do. + +- Flash the left half, then flash the same firmware on the right. This only + works when the left half is plugged directly to the computer and the keymap + is mirrored. It saves the small extra step of rebuilding with + "MASTER=right". + +- The same as the previous one but with "MASTER=right" when you build the + firmware, then flash the same firmware to both halves. You just have to + directly connect the right half to the computer. + +- For minor changes such as changing only the keymap without having updated + any part of the firmware code itself, you can program only the MASTER half. + It is safest to program both halves though. + # Contributing your keymap The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. -- cgit v1.2.3 From 0dfd1712bb22be9fe63b8754eb8fe72675906c6f Mon Sep 17 00:00:00 2001 From: Sean Reifschneider Date: Wed, 24 Aug 2016 09:30:29 -0600 Subject: Making the existing firmware link better --- keyboards/ergodox/readme.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 4730de36f..b113ca7dd 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -6,7 +6,8 @@ experience or the setup of a build environment. Quickstart: - - Find and download an [existing firmware](#other-firmware-options) + - Find and download an existing firmware + [from Other Firmware Options](#other-firmware-options) - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez) or [ErgoDox Infinity](#ergodox-infinity) -- cgit v1.2.3 From f512179e66e4d4dfbcc92c6ba1aaa1b6cf1ef12b Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Wed, 24 Aug 2016 13:17:01 +0200 Subject: ergodox: Update algernon's keymap to v1.6 Major changes include: Base layer changes ------------------ * The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`. * The `:;` and `-_` keys are now available on the base layer, on their **ADORE** location, too, just below `[{(`/`]})`. * The `Apps` key has been replaced by `F12`. * The `-`/`_` is no longer a tap-dance key. ADORE layer changes ------------------- * Adjustments were made to the **ADORE** layer, to separate some inconvenient combinations. Miscellaneous changes --------------------- * `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. * The mouse acceleration keys on the **Navigation and Media* layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. * When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. Heatmap ------- * The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off. * The heatmap generator received a lot of updates. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/Makefile | 9 +- .../keymaps/algernon/images/adore-layer.png | Bin 93748 -> 93893 bytes .../ergodox/keymaps/algernon/images/base-layer.png | Bin 95222 -> 95204 bytes keyboards/ergodox/keymaps/algernon/keymap.c | 494 +++++++----------- keyboards/ergodox/keymaps/algernon/readme.md | 67 ++- .../algernon/tools/heatmap-adore-layout.json | 533 -------------------- .../algernon/tools/heatmap-base-layout.json | 533 -------------------- .../algernon/tools/heatmap-layout.ADORE.json | 553 +++++++++++++++++++++ .../algernon/tools/heatmap-layout.Dvorak.json | 542 ++++++++++++++++++++ .../keymaps/algernon/tools/log-to-heatmap.py | 368 +++++++++----- 10 files changed, 1564 insertions(+), 1535 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json delete mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json create mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json create mode 100644 keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile index 00194857a..7c2b3ad97 100644 --- a/keyboards/ergodox/keymaps/algernon/Makefile +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -1,22 +1,23 @@ BOOTMAGIC_ENABLE=no COMMAND_ENABLE=no SLEEP_LED_ENABLE=no -UNICODE_ENABLE=no FORCE_NKRO ?= yes DEBUG_ENABLE = no CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes KEYLOGGER_ENABLE ?= yes +UCIS_ENABLE = yes +MOUSEKEY_ENABLE ?= yes -ADORE_AUTOLOG ?= no +AUTOLOG_ENABLE ?= no ifeq (${FORCE_NKRO},yes) OPT_DEFS += -DFORCE_NKRO endif -ifeq (${ADORE_AUTOLOG},yes) +ifeq (${AUTOLOG_ENABLE},yes) KEYLOGGER_ENABLE = yes -OPT_DEFS += -DADORE_AUTOLOG +OPT_DEFS += -DAUTOLOG_ENABLE endif ifeq (${KEYLOGGER_ENABLE},yes) diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png index 44ad8a1eb..3d0a5fb20 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png and b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png index da159fbe2..7ea57aae3 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/base-layer.png and b/keyboards/ergodox/keymaps/algernon/images/base-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index 144030e2e..9f476d8a6 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -2,6 +2,7 @@ * algernon's ErgoDox EZ layout, please see the readme.md file! */ +#include #include "ergodox.h" #include "led.h" #include "debug.h" @@ -33,7 +34,6 @@ enum { // Buttons that do extra stuff A_GUI, A_PLVR, - A_ESC, A_MPN, // Function / number keys @@ -47,7 +47,6 @@ enum { KF_8, KF_9, KF_10, - KF_11, // =, F11 // Application select keys APP_SLK, // Slack @@ -62,6 +61,11 @@ enum { A_MDL, A_MDR, + // Mouse acceleration + A_ACL0, + A_ACL1, + A_ACL2, + // Hungarian layer keys HU_AA, // Á HU_OO, // Ó @@ -89,7 +93,6 @@ enum { enum { CT_CLN = 0, - CT_MNS, CT_TA, CT_LBP, CT_RBP @@ -102,7 +105,11 @@ uint16_t gui_timer = 0; uint16_t kf_timers[12]; #if KEYLOGGER_ENABLE +# ifdef AUTOLOG_ENABLE +bool log_enable = true; +# else bool log_enable = false; +# endif #endif bool time_travel = false; @@ -114,12 +121,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Base Layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | ~ | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | ~ | ' | , | . | P | Y | ( | | ) | F | G | C | R | L | \ | + * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| + * |-----------+------+------+------+------+------| : | | - |------+------+------+------+------+-----------| * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * | | | | | : | | - | | | | | @@ -135,21 +142,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = KEYMAP( // left hand M(A_MPN) ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC +,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,TD(CT_LBP) ,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN +,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,TD(CT_CLN) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) ,F(F_ALT),F(F_GUI) ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) + ,KC_BSPC,F(F_SFT),KC_ESC // right hand - ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS + ,KC_F12 ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP - ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_MINS ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP + ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,OSL(NMDIA),KC_DEL ,KC_LEAD @@ -159,13 +166,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 1: Adore layer * * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | `~ | X | W | K | L | M | ( | | ) | F | H | C | P | Y | \ | + * | `~ | Y | W | G | L | M | ( | | ) | F | H | C | P | X | \ | * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | Z | Q | ' | , | . | : | | - | B | G | V | J | / | | + * | | Z | Q | ' | , | . | : | | - | B | K | V | J | / | | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * | | | | | | | | | | | | * `-----------------------------------' `-----------------------------------' @@ -180,20 +187,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [ADORE] = KEYMAP( // left hand KC_MPLY ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,KC_GRV ,KC_X ,KC_W ,KC_K ,KC_L ,KC_M ,TD(CT_LBP) +,KC_GRV ,KC_Y ,KC_W ,KC_G ,KC_L ,KC_M ,TD(CT_LBP) ,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U ,KC_NO ,KC_Z ,KC_Q ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,F(F_ALT),F(F_GUI) ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) + ,KC_BSPC,F(F_SFT),KC_ESC // right hand - ,KC_APP ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS + ,KC_F12 ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_X ,KC_BSLS ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL - ,TD(CT_MNS),KC_B ,KC_G ,KC_V ,KC_J ,KC_SLSH ,KC_NO + ,KC_MINS ,KC_B ,KC_K ,KC_V ,KC_J ,KC_SLSH ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,OSL(NMDIA),KC_DEL @@ -363,14 +370,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [NMDIA] = KEYMAP( // left hand - KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) -,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO -,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO + M(A_ACL0) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) +,M(A_ACL1) ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO +,M(A_ACL2) ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO ,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_MUTE ,KC_VOLU ,KC_VOLD - ,KC_SPC,KC_ENTER,M(A_ESC) + ,KC_SPC,KC_ENTER,KC_ESC // right hand ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO @@ -439,7 +446,7 @@ const uint16_t PROGMEM fn_actions[] = { ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) }; -void toggle_steno(int pressed) +static void toggle_steno(int pressed) { uint8_t layer = biton32(layer_state); @@ -462,7 +469,7 @@ void toggle_steno(int pressed) } } -macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) +static macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) { uint8_t need_shift = 0; uint8_t hold_shift = 0; @@ -507,46 +514,43 @@ macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) return MACRO_NONE; } -void ang_handle_kf (keyrecord_t *record, uint8_t id) +static bool from_appsel; + +static void ang_handle_kf (keyrecord_t *record, uint8_t id) { uint8_t code = id - KF_1; if (record->event.pressed) { kf_timers[code] = timer_read (); } else { - uint8_t kc; + uint8_t kc_base; - if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) { + if (from_appsel) { + from_appsel = false; + return; + } + + if (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM) { // Long press - kc = KC_F1 + code; + kc_base = KC_F1; } else { - if (id == KF_11) - kc = KC_EQL; - else - kc = KC_1 + code; + kc_base = KC_1; } + kf_timers[code] = 0; + code += kc_base; - register_code (kc); - unregister_code (kc); + register_code (code); + unregister_code (code); } } +static struct { + uint8_t idx; +} m_accel_state; + const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { switch(id) { - case A_ESC: - if (record->event.pressed) { - if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { - clear_oneshot_mods (); - } else { - register_code (KC_ESC); - } - layer_off (HUN); - } else { - unregister_code (KC_ESC); - } - break; - case A_MPN: if (record->event.pressed) { if (keyboard_report->mods & MOD_BIT(KC_LSFT) || @@ -588,6 +592,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case HU_UEE: return ang_do_hun (record, KC_EQL, KC_U); +#if MOUSEKEY_ENABLE /* Mouse movement */ case A_MUL: if (record->event.pressed) { @@ -633,6 +638,24 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) mousekey_send(); break; + case A_ACL0 ... A_ACL2: + if (record->event.pressed) { + uint8_t idx = id - A_ACL0; + if (m_accel_state.idx == id) { + mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); + m_accel_state.idx = 0; + } else { + if (m_accel_state.idx) { + mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); + m_accel_state.idx = 0; + } + mousekey_on(KC_ACL0 + idx); + m_accel_state.idx = id; + } + } + break; +#endif + /* Plover base */ case A_PLVR: toggle_steno(record->event.pressed); @@ -663,22 +686,34 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) break; case APP_SLK: + from_appsel = true; return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); case APP_EMCS: + from_appsel = true; return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END); case APP_TERM: - return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END); + from_appsel = true; + if (!record->event.pressed) { + register_code(KC_ESC); + unregister_code(KC_ESC); + wait_ms(TAPPING_TERM + 25); + register_code(KC_DEL); + unregister_code(KC_DEL); + } + break; case APP_CHRM: + from_appsel = true; return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); case APP_MSIC: + from_appsel = true; return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); /* Function keys */ - case KF_1 ... KF_11: + case KF_1 ... KF_10: ang_handle_kf (record, id); break; } @@ -686,12 +721,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; }; -uint8_t is_adore = 0; +static uint8_t is_adore = 0; // Runs just one time when the keyboard initializes. void matrix_init_user(void) { uint8_t dl; + set_unicode_input_mode(UC_LNX); + ergodox_led_all_on(); for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { ergodox_led_all_set (i); @@ -709,120 +746,38 @@ void matrix_init_user(void) { dl = eeconfig_read_default_layer (); if (dl == (1UL << ADORE)) { is_adore = 1; -#if ADORE_AUTOLOG - log_enable = true; -#endif } }; LEADER_EXTERNS(); -void ang_do_unicode (void) { - register_code (KC_RCTL); - register_code (KC_RSFT); - register_code (KC_U); - unregister_code (KC_U); - unregister_code (KC_RSFT); - unregister_code (KC_RCTL); - wait_ms (100); -} +static void ang_tap (uint8_t code, ...) { + uint8_t kc = code; + va_list ap; -void ang_tap (uint16_t codes[]) { - for (int i = 0; codes[i] != 0; i++) { - register_code (codes[i]); - unregister_code (codes[i]); - wait_ms (50); - } + va_start(ap, code); + + do { + register_code(kc); + unregister_code(kc); + wait_ms(50); + kc = va_arg(ap, int); + } while (kc != 0); + va_end(ap); } #define TAP_ONCE(code) \ register_code (code); \ unregister_code (code) -void ang_tap_dance_bp_finished (qk_tap_dance_state_t *state, void *user_data) { - bool left, parens; - - if (state->count > 2) { - state->count = 0; - return; - } - - if (state->keycode == TD(CT_LBP)) - left = true; - else - left = false; - - if (state->count == 1) - parens = false; - else - parens = true; - - if (parens) { - register_code (KC_RSFT); - if (left) { - TAP_ONCE(KC_9); - } else { - TAP_ONCE(KC_0); - } - unregister_code (KC_RSFT); - } else { - if (left) { - TAP_ONCE (KC_LBRC); - } else { - TAP_ONCE (KC_RBRC); - } - } -} - -void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_RSFT); - register_code (KC_SCLN); - } else if (state->count == 2) { - register_code (KC_SCLN); - } -} - -void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_SCLN); - unregister_code (KC_RSFT); - } else if (state->count == 2) { - unregister_code (KC_SCLN); - } -} - -void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_MINS); - } else if (state->count == 2) { - register_code (KC_RSFT); - register_code (KC_MINS); - } -} - -void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_MINS); - } else if (state->count == 2) { - unregister_code (KC_RSFT); - unregister_code (KC_MINS); - } -} - typedef struct { bool layer_toggle; bool sticky; - bool finished_once; } td_ta_state_t; -void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { +static void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - if (td_ta->finished_once) { - return; - } - if (td_ta->sticky) { td_ta->sticky = false; td_ta->layer_toggle = false; @@ -830,7 +785,6 @@ void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { return; } - td_ta->finished_once = true; if (state->count == 1 && !state->pressed) { register_code (KC_TAB); td_ta->sticky = false; @@ -842,35 +796,29 @@ void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { +static void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { td_ta_state_t *td_ta = (td_ta_state_t *) user_data; if (!td_ta->layer_toggle) unregister_code (KC_TAB); if (!td_ta->sticky) layer_off (ARRW); - - td_ta->finished_once = false; } qk_tap_dance_action_t tap_dance_actions[] = { - [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) - ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) + [CT_CLN] = ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN) ,[CT_TA] = { .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, - .user_data = (void *)&((td_ta_state_t) { false, false, false }) + .user_data = (void *)&((td_ta_state_t) { false, false }) } - ,[CT_LBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) - ,[CT_RBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) + ,[CT_LBP] = ACTION_TAP_DANCE_DOUBLE (KC_LBRC, KC_LPRN) + ,[CT_RBP] = ACTION_TAP_DANCE_DOUBLE (KC_RBRC, KC_RPRN) }; -static uint16_t uni[32]; -static uint8_t unicnt; -static bool unimagic = false; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); + bool is_arrow = false; if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) unregister_code (KC_LGUI); @@ -893,13 +841,19 @@ void matrix_scan_user(void) { ergodox_right_led_2_set (LED_BRIGHTNESS_HI); } + if (layer_state & (1UL << ARRW)) { + ergodox_right_led_1_on (); + ergodox_right_led_3_on (); + is_arrow = true; + } + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { ergodox_right_led_1_set (LED_BRIGHTNESS_HI); ergodox_right_led_1_on (); } else { ergodox_right_led_1_set (LED_BRIGHTNESS_LO); - if (layer != NMDIA && layer != PLVR && layer != ADORE) + if (layer != NMDIA && layer != PLVR && layer != ADORE && !is_arrow) ergodox_right_led_1_off (); } @@ -919,7 +873,7 @@ void matrix_scan_user(void) { ergodox_right_led_3_on (); } else { ergodox_right_led_3_set (LED_BRIGHTNESS_LO); - if (layer != HUN && layer != PLVR && layer != ADORE) + if (layer != HUN && layer != PLVR && layer != ADORE && !is_arrow) ergodox_right_led_3_off (); } @@ -936,20 +890,17 @@ void matrix_scan_user(void) { } #endif + SEQ_ONE_KEY (KC_Q) { + register_code16 (LCTL(KC_1)); + unregister_code16 (LCTL(KC_1)); + } + SEQ_ONE_KEY (KC_T) { time_travel = !time_travel; } SEQ_ONE_KEY (KC_U) { - ang_do_unicode (); - } - - SEQ_TWO_KEYS (KC_LEAD, KC_U) { - unicnt = 0; - unimagic = true; - register_code(KC_RSFT); - TAP_ONCE(KC_U); - unregister_code(KC_RSFT); + qk_ucis_start(); } SEQ_ONE_KEY (KC_V) { @@ -958,25 +909,23 @@ void matrix_scan_user(void) { SEQ_ONE_KEY (KC_L) { /* λ */ - ang_do_unicode (); - - uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0}; - ang_tap (codes); + unicode_input_start(); + register_hex(0x03bb); + unicode_input_finish(); } SEQ_ONE_KEY (KC_Y) { - uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0}; - ang_tap (codes); + ang_tap (KC_BSLS, KC_O, KC_SLSH, 0); } SEQ_ONE_KEY (KC_S) { - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + unicode_input_start(); register_hex(0xaf); unicode_input_finish(); TAP_ONCE (KC_BSLS); register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); - ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC); + unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); TAP_ONCE (KC_SLSH); - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + unicode_input_start (); register_hex(0xaf); unicode_input_finish(); } SEQ_TWO_KEYS (KC_W, KC_M) { @@ -987,8 +936,7 @@ void matrix_scan_user(void) { wait_ms (1000); - uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; - ang_tap (codes); + ang_tap (KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0); register_code (KC_LGUI); register_code (KC_UP); unregister_code (KC_UP); @@ -1013,13 +961,7 @@ void matrix_scan_user(void) { ergodox_right_led_2_off (); wait_ms (100); ergodox_right_led_1_off (); -#if ADORE_AUTOLOG - log_enable = true; -#endif } else { -#if ADORE_AUTOLOG - log_enable = false; -#endif is_adore = 0; default_layer_and (0); default_layer_or (1UL << BASE); @@ -1043,140 +985,38 @@ void matrix_scan_user(void) { static uint16_t last4[4]; -bool is_uni_seq(char *seq) { - uint8_t i; - - for (i = 0; seq[i]; i++) { - uint16_t code; - if (('1' <= seq[i]) && (seq[i] <= '9')) - code = seq[i] - '1' + KC_1; - else if (seq[i] == '0') - code = KC_0; - else - code = seq[i] - 'a' + KC_A; - - if (i > unicnt) - return false; - if (uni[i] != code) - return false; - } - - if (uni[i] == KC_ENT || uni[i] == KC_SPC) - return true; - - return false; -} - -uint16_t hex_to_keycode(uint8_t hex) -{ - if (hex == 0x0) { - return KC_0; - } else if (hex < 0xA) { - return KC_1 + (hex - 0x1); - } else { - return KC_A + (hex - 0xA); - } -} - -void register_hex(uint16_t hex) { - bool leading_zeros = true; - - for(int i = 3; i >= 0; i--) { - uint8_t digit = ((hex >> (i*4)) & 0xF); - if (digit != 0) - leading_zeros = false; - else if (leading_zeros) - continue; - register_code(hex_to_keycode(digit)); - unregister_code(hex_to_keycode(digit)); - wait_ms(10); - } -} - -typedef struct { - char *symbol; - uint16_t codes[4]; -} qk_ucis_symbol_t; - -static qk_ucis_symbol_t ucis_symbol_table[] = { - {"poop", {0x1, 0xf4a9, 0}}, - {"rofl", {0x1, 0xf923, 0}}, - {"kiss", {0x1, 0xf619, 0}}, - {"snowman", {0x2603, 0}}, - {NULL, {}} -}; - -bool process_record_ucis (uint16_t keycode, keyrecord_t *record) { - uint8_t i; - - if (!unimagic) - return true; - - if (!record->event.pressed) - return true; - - uni[unicnt] = keycode; - unicnt++; - - if (keycode == KC_BSPC) { - if (unicnt >= 2) { - unicnt-= 2; - return true; - } else { - unicnt--; - return false; - } - } - - if (keycode == KC_ENT || keycode == KC_SPC) { - bool symbol_found = false; - - for (i = unicnt; i > 0; i--) { - register_code (KC_BSPC); - unregister_code (KC_BSPC); - wait_ms(10); - } - - ang_do_unicode(); - wait_ms(10); - for (i = 0; ucis_symbol_table[i].symbol; i++) { - if (is_uni_seq (ucis_symbol_table[i].symbol)) { - symbol_found = true; - for (uint8_t j = 0; ucis_symbol_table[i].codes[j]; j++) { - register_hex(ucis_symbol_table[i].codes[j]); - } - break; - } - } - if (!symbol_found) { - for (i = 0; i < unicnt - 1; i++) { - uint8_t code; - - if (uni[i] > KF_1) - code = uni[i] - KF_1 + KC_1; - else - code = uni[i]; - TAP_ONCE(code); - wait_ms (10); - } - } - - unimagic = false; - return true; - } - return true; -} +const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE +( + UCIS_SYM("poop", 0x1f4a9), + UCIS_SYM("rofl", 0x1f923), + UCIS_SYM("kiss", 0x1f619), + UCIS_SYM("snowman", 0x2603), + UCIS_SYM("coffee", 0x2615), + UCIS_SYM("heart", 0x2764), + UCIS_SYM("bolt", 0x26a1) +); bool process_record_user (uint16_t keycode, keyrecord_t *record) { #if KEYLOGGER_ENABLE if (log_enable) { - xprintf ("KL: col=%d, row=%d\n", record->event.key.col, - record->event.key.row); + xprintf ("KL: col=%02d, row=%02d, pressed=%d, layer=%s\n", record->event.key.col, + record->event.key.row, record->event.pressed, (is_adore) ? "ADORE" : "Dvorak"); } #endif - if (!process_record_ucis (keycode, record)) - return false; + if (keycode == KC_ESC && record->event.pressed) { + bool queue = true; + + if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { + clear_oneshot_mods (); + queue = false; + } + if (layer_state & (1UL<event.pressed) { uint8_t p; @@ -1188,15 +1028,13 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) { last4[3] = keycode; if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { - uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0}; - ang_tap (codes); + ang_tap (KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0); register_code (KC_RSFT); register_code (KC_EQL); unregister_code (KC_EQL); unregister_code (KC_RSFT); - uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0}; - ang_tap (codes2); + ang_tap (KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0); return false; } @@ -1204,3 +1042,17 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) { return true; } + +void qk_ucis_symbol_fallback (void) { + for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { + uint8_t code; + + if (qk_ucis_state.codes[i] > KF_1) + code = qk_ucis_state.codes[i] - KF_1 + KC_1; + else + code = qk_ucis_state.codes[i]; + register_code(code); + unregister_code(code); + wait_ms (10); + } +} diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 26dfddbe6..5e7adb332 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -3,11 +3,15 @@ algernon's layout ======================= -This is an unconventional layout for the ErgoDox EZ. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. +This is an unconventional layout for the [ErgoDox EZ][ez]. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. + [ez]: https://ergodox-ez.com/ [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/ -Some of the things in the layout only work when one uses Spacemacs and GNOME under Linux. Your mileage may vary. +Some of the things in the layout only work when one uses [Spacemacs][spacemacs] and [GNOME][gnome] under Linux. Your mileage may vary. + + [spacemacs]: http://spacemacs.org/ + [gnome]: https://www.gnome.org/ ## Table of Contents @@ -40,10 +44,10 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. * The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle. -* When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key. +* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap. * Tapping the `:` key once yields `:`, tapping it twice yields `;`. +* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`. * The **Lead** key allows me to type in a sequence of keys, and trigger some actions: - - `LEAD u` enters unicode input mode, by sending the GTK+ key sequence that does this. - `LEAD l` uses the unicode input method to enter a `λ`. - `LEAD s` does a lot of magic to type in a shruggie: `¯\_(ツ)_/¯` - `LEAD y` types `\o/`. @@ -52,7 +56,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest - `LEAD v` prints the firmware version, the keyboard and the keymap. - `LEAD d` toggles logging keypress positions to the HID console. - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. - - `LEAD LEAD u` enters the [Unicode symbol input][#unicode-symbol-input] mode. + - `LEAD u` enters the [Unicode symbol input](#unicode-symbol-input) mode. ## ADORE layer @@ -91,6 +95,7 @@ For the layers, the following rules apply: * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. +* When the **ARROW** layer is active, the *red* and *blue* ones are on. * For the [Steno layer](#steno-layer), all LEDs will be turned on. Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. @@ -116,7 +121,7 @@ This is an experimental feature, and may or may not work reliably. When the keypress logging functionality is enabled (by `LEAD d`), the keyboard will output a line every time a key is pressed, containing the position of the key in the matrix. This allows one to collect this information, and build analytics over it, such as a heat map, including dead keys too. -Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, simply point `tools/log-to-heatmap.py` to a base layout file (one is included in the `tools/` directory), and the key position log. The latter one can create by running `hid-listen`, and redirecting its output to a file. +Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, either pipe the output of `hid_listen` into it, or pipe it an already saved log, and it will save the results into files in an output directory (given on the command-line). See the output of `tools/log-to-heatmap.py --help` for more information. [kle]: http://www.keyboard-layout-editor.com/ @@ -151,7 +156,35 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the # Changelog -## v1.5 - 2016-08-12 +## v1.6 + +*2016-08-24* + +### Base layer changes + +* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`. +* The `:;` and `-_` keys are now available on the base layer, on their [ADORE](#adore-layer) location, too, just below `[{(`/`]})`. +* The `Apps` key has been replaced by `F12`. +* The `-`/`_` is no longer a tap-dance key. + +### ADORE layer changes + +* Adjustments were made to the [ADORE](#adore-layer) layer, to separate some inconvenient combinations. + +### Miscellaneous changes + +* `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. +* The mouse acceleration keys on the [Navigation and Media](#navigation-and-media-layer) layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. +* When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. + +### Heatmap + +* The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off. +* The heatmap generator received a lot of updates. + +## v1.5 + +*2016-08-12* * The **1HAND** layer has been removed. * A `Delete` key is now available on the right thumb cluster. @@ -161,7 +194,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * On the **ARROW** layer, `Backspace` has been replaced by `Enter`. * There is some experimental support for entering Unicode symbols. -## v1.4 - 2016-07-29 +## v1.4 + +*2016-07-29* * When toggling the key logging on or off, the LEDs will do a little dance. * The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it. @@ -169,14 +204,18 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * The `-`/`_` key was turned into a tap-dance key too. * There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`. -## v1.3 - 2016-07-06 +## v1.3 + +*2016-07-06* * Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs. * The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are. * The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now. * Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot. -## v1.2 - 2016-06-22 +## v1.2 + +*2016-06-22* * The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows). * The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted. @@ -187,7 +226,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped. * The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers. -## v1.1 - 2016-06-14 +## v1.1 + +*2016-06-14* * The keyboard starts in NKRO mode, bootmagic and other things are disabled. * A [Steno](#steno-layer) layer was added, to be used with Plover. @@ -201,7 +242,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the - `:` now inputs `;` when shifted. * `ESC` cancels the [Hungarian](#hungarian-layer) layer too, not just modifiers. -## v1.0 - 2016-05-26 +## v1.0 + +*2016-05-26* Initial version. diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json deleted file mode 100644 index 544f61ce8..000000000 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json +++ /dev/null @@ -1,533 +0,0 @@ -[ - { - "backcolor": "#ffffff", - "name": "ErgoDox - algernon's layout: Heatmap", - "author": "Gergely Nagy ", - "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", - "switchMount": "cherry", - "switchBrand": "gateron", - "switchType": "KS-3-Tea", - "pcb": true, - "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" - }, - [ - { - "x": 3.5, - "c": "#a7d0db", - "fa": [ - 0, - 0, - 2 - ] - }, - "#\n3\nF3", - { - "x": 10.5, - "c": "#a7d0db", - "t": "#000000", - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - "*\n8\nF8" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "@\n2\nF2", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "$\n4\nF4", - { - "x": 8.5 - }, - "&\n7\nF7", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "(\n9\nF9" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "%\n5\nF5", - { - "c": "#f9cd31", - "a": 7, - "f": 2 - }, - "STENO", - { - "x": 4.5, - "f": 6 - }, - "", - { - "c": "#7adabd", - "a": 4, - "f": 3, - "fa": [ - 0, - 0, - 2 - ] - }, - "^\n6\nF6" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "f": 3, - "w": 1.5 - }, - "\n\n~\n`", - { - "t": "#0d0d0b" - }, - "!\n1\nF1", - { - "x": 14.5 - }, - ")\n0\nF10", - { - "a": 7, - "w": 1.5 - }, - "F11" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 6 - }, - "L", - { - "x": 10.5 - }, - "C" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", - "a": 4 - }, - ">\n.", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "a": 6 - }, - "W", - { - "x": 8.5 - }, - "H", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "P" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "M", - { - "c": "#93c9b7", - "a": 4, - "h": 1.5 - }, - "{\n[", - { - "x": 4.5, - "h": 1.5 - }, - "}\n]", - { - "c": "#7adabd", - "a": 6 - }, - "F" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "t": "#0d0d0b", - "f": 6, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "a": 4, - "f": 3 - }, - "<\n,", - { - "x": 14.5, - "a": 6 - }, - "Y", - { - "a": 4, - "w": 1.5 - }, - "|\n\\" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 6 - }, - "E", - { - "x": 10.5 - }, - "T" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "O", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "n": true - }, - "I", - { - "x": 8.5, - "n": true - }, - "R", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "N" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "U", - { - "x": 6.5 - }, - "D" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "t": "#0d0d0b", - "fa": [ - 6 - ], - "w": 1.5 - }, - "\n\nTab", - { - "f": 3 - }, - "A", - { - "x": 14.5, - "f": 3 - }, - "S", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 6 - ], - "w": 1.5 - }, - "+\n=" - ], - [ - { - "y": -0.625, - "x": 6.5, - "c": "#93c9b7", - "t": "#000000", - "a": 7, - "h": 1.5 - }, - "(", - { - "x": 4.5, - "h": 1.5 - }, - ")" - ], - [ - { - "y": -0.75, - "x": 3.5, - "c": "#a7d0db", - "a": 4, - "f": 3 - }, - "\"\n'", - { - "x": 10.5 - }, - "V" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "Z", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "K", - { - "x": 8.5 - }, - "G", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "J" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "X", - { - "x": 6.5 - }, - "B" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "f": 9, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "t": "#0d0d0b", - "a": 4, - "f": 3 - }, - "?\n/", - { - "x": 14.5, - "a": 6 - }, - "Q", - { - "c": "#ffb07b", - "t": "#000000", - "f": 9, - "w": 1.5 - }, - "" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#d9dae0", - "g": true, - "a": 7, - "f": 3 - }, - "", - { - "x": 10.5 - }, - "" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "", - { - "x": 1, - "c": "#d4872a", - "g": false, - "a": 5 - }, - ";\n:", - { - "x": 8.5 - }, - "_\n-", - { - "x": 1, - "c": "#d9dae0", - "g": true, - "a": 7 - }, - "" - ], - [ - { - "y": -0.75, - "x": 0.5 - }, - "", - {}, - "", - { - "x": 14.5 - }, - "", - {}, - "" - ], - [ - { - "r": 30, - "rx": 6.5, - "ry": 4.25, - "y": -1, - "x": 1, - "c": "#f9cd31", - "g": false - }, - "Alt", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 9 - ] - }, - "\n\n\n" - ], - [ - { - "c": "#d4872a", - "a": 7, - "f": 9, - "h": 2 - }, - "", - { - "h": 2 - }, - "", - { - "c": "#f9cd31", - "f": 3 - }, - "Ctrl" - ], - [ - { - "x": 2, - "c": "#e26757" - }, - "ESC" - ], - [ - { - "r": -30, - "rx": 13, - "y": -1, - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "MEDIA", - {}, - "1HAND" - ], - [ - { - "x": -3 - }, - "LEAD", - { - "c": "#d4872a", - "f": 9, - "h": 2 - }, - "", - { - "f": 3, - "h": 2 - }, - "SPC" - ], - [ - { - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "HUN" - ] -] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json deleted file mode 100644 index 148bb1f23..000000000 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json +++ /dev/null @@ -1,533 +0,0 @@ -[ - { - "backcolor": "#ffffff", - "name": "ErgoDox - algernon's layout: Heatmap", - "author": "Gergely Nagy ", - "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", - "switchMount": "cherry", - "switchBrand": "gateron", - "switchType": "KS-3-Tea", - "pcb": true, - "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" - }, - [ - { - "x": 3.5, - "c": "#a7d0db", - "fa": [ - 0, - 0, - 2 - ] - }, - "#\n3\nF3", - { - "x": 10.5, - "c": "#a7d0db", - "t": "#000000", - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - "*\n8\nF8" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "@\n2\nF2", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "$\n4\nF4", - { - "x": 8.5 - }, - "&\n7\nF7", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "(\n9\nF9" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "%\n5\nF5", - { - "c": "#f9cd31", - "a": 7, - "f": 2 - }, - "STENO", - { - "x": 4.5, - "f": 6 - }, - "", - { - "c": "#7adabd", - "a": 4, - "f": 3, - "fa": [ - 0, - 0, - 2 - ] - }, - "^\n6\nF6" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "f": 3, - "w": 1.5 - }, - "\n\n~\n`", - { - "t": "#0d0d0b" - }, - "!\n1\nF1", - { - "x": 14.5 - }, - ")\n0\nF10", - { - "a": 7, - "w": 1.5 - }, - "F11" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 4 - }, - ">\n.", - { - "x": 10.5, - "a": 6 - }, - "C" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b", - "a": 4 - }, - "<\n,", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "a": 6 - }, - "P", - { - "x": 8.5 - }, - "G", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "R" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "Y", - { - "c": "#93c9b7", - "a": 4, - "h": 1.5 - }, - "{\n[", - { - "x": 4.5, - "h": 1.5 - }, - "}\n]", - { - "c": "#7adabd", - "a": 6 - }, - "F" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "t": "#0d0d0b", - "f": 6, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "a": 4, - "f": 3 - }, - "\"\n'", - { - "x": 14.5, - "a": 6 - }, - "L", - { - "a": 4, - "w": 1.5 - }, - "|\n\\" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#a7d0db", - "t": "#000000", - "a": 6 - }, - "E", - { - "x": 10.5 - }, - "T" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "O", - { - "x": 1, - "c": "#7adabd", - "t": "#000000", - "n": true - }, - "U", - { - "x": 8.5, - "n": true - }, - "H", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "N" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "I", - { - "x": 6.5 - }, - "D" - ], - [ - { - "y": -0.875, - "c": "#ffb2d2", - "t": "#0d0d0b", - "fa": [ - 6 - ], - "w": 1.5 - }, - "\n\nTab", - { - "f": 3 - }, - "A", - { - "x": 14.5, - "f": 3 - }, - "S", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 6 - ], - "w": 1.5 - }, - "+\n=" - ], - [ - { - "y": -0.625, - "x": 6.5, - "c": "#93c9b7", - "t": "#000000", - "a": 7, - "h": 1.5 - }, - "(", - { - "x": 4.5, - "h": 1.5 - }, - ")" - ], - [ - { - "y": -0.75, - "x": 3.5, - "c": "#a7d0db", - "a": 6 - }, - "J", - { - "x": 10.5 - }, - "W" - ], - [ - { - "y": -0.875, - "x": 2.5, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "Q", - { - "x": 1, - "c": "#7adabd", - "t": "#000000" - }, - "K", - { - "x": 8.5 - }, - "M", - { - "x": 1, - "c": "#bfbad1", - "t": "#0d0d0b" - }, - "V" - ], - [ - { - "y": -0.875, - "x": 5.5, - "c": "#7adabd", - "t": "#000000" - }, - "X", - { - "x": 6.5 - }, - "B" - ], - [ - { - "y": -0.875, - "c": "#ffb07b", - "f": 9, - "w": 1.5 - }, - "\n\n", - { - "c": "#ffb2d2", - "t": "#0d0d0b", - "a": 4, - "f": 3 - }, - "?\n/", - { - "x": 14.5, - "a": 6 - }, - "Z", - { - "c": "#ffb07b", - "t": "#000000", - "f": 9, - "w": 1.5 - }, - "" - ], - [ - { - "y": -0.375, - "x": 3.5, - "c": "#d9dae0", - "g": true, - "a": 7, - "f": 3 - }, - "", - { - "x": 10.5 - }, - "" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "", - { - "x": 1, - "c": "#d4872a", - "g": false, - "a": 5 - }, - ";\n:", - { - "x": 8.5 - }, - "_\n-", - { - "x": 1, - "c": "#d9dae0", - "g": true, - "a": 7 - }, - "" - ], - [ - { - "y": -0.75, - "x": 0.5 - }, - "", - {}, - "", - { - "x": 14.5 - }, - "", - {}, - "" - ], - [ - { - "r": 30, - "rx": 6.5, - "ry": 4.25, - "y": -1, - "x": 1, - "c": "#f9cd31", - "g": false - }, - "Alt", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 9 - ] - }, - "\n\n\n" - ], - [ - { - "c": "#d4872a", - "a": 7, - "f": 9, - "h": 2 - }, - "", - { - "h": 2 - }, - "", - { - "c": "#f9cd31", - "f": 3 - }, - "Ctrl" - ], - [ - { - "x": 2, - "c": "#e26757" - }, - "ESC" - ], - [ - { - "r": -30, - "rx": 13, - "y": -1, - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "MEDIA", - {}, - "1HAND" - ], - [ - { - "x": -3 - }, - "LEAD", - { - "c": "#d4872a", - "f": 9, - "h": 2 - }, - "", - { - "f": 3, - "h": 2 - }, - "SPC" - ], - [ - { - "x": -3, - "c": "#f9cd31", - "f": 2 - }, - "HUN" - ] -] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json new file mode 100644 index 000000000..4dfa877a7 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json @@ -0,0 +1,553 @@ +[ + { + "backcolor": "#ffffff", + "name": "ErgoDox - algernon's layout: Heatmap", + "author": "Gergely Nagy ", + "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea", + "pcb": true, + "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" + }, + [ + { + "x": 3.5, + "c": "#a7d0db", + "fa": [ + 0, + 0, + 2 + ] + }, + "#\n3\nF3", + { + "x": 10.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "*\n8\nF8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "@\n2\nF2", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "$\n4\nF4", + { + "x": 8.5 + }, + "&\n7\nF7", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "(\n9\nF9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "%\n5\nF5", + { + "c": "#f9cd31", + "a": 7, + "f": 2 + }, + "STENO", + { + "x": 4.5, + "f": 3 + }, + "F12", + { + "c": "#7adabd", + "a": 4, + "f": 3, + "fa": [ + 0, + 0, + 2 + ] + }, + "^\n6\nF6" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "f": 9, + "a": 6, + "w": 1.5 + }, + "\n\n", + { + "t": "#0d0d0b", + "f": 3, + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "!\n1\nF1", + { + "x": 14.5 + }, + ")\n0\nF10", + { + "a": 7, + "w": 1.5 + }, + "F11" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "G", + { + "x": 10.5 + }, + "C" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 6 + }, + "W", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 6 + }, + "L", + { + "x": 8.5 + }, + "H", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "P" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "M", + { + "c": "#93c9b7", + "a": 4, + "fa": [0, 0, 0], + "h": 1.5 + }, + "{\n(\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n)\n]", + { + "c": "#7adabd", + "a": 6 + }, + "F" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "t": "#0d0d0b", + "f": 3, + "a": 4, + "w": 1.5 + }, + "\n\n~\n`", + { + "c": "#ffb2d2", + "a": 6, + "f": 3 + }, + "Y", + { + "x": 14.5, + "a": 6 + }, + "X", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "E", + { + "x": 10.5 + }, + "T" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "O", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "n": true + }, + "I", + { + "x": 8.5, + "n": true + }, + "R", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "N" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "U", + { + "x": 6.5 + }, + "D" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "t": "#0d0d0b", + "fa": [ + 6 + ], + "w": 1.5 + }, + "\n\nTab", + { + "f": 3 + }, + "A", + { + "x": 14.5, + "f": 3 + }, + "S", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 6 + ], + "w": 1.5 + }, + "+\n=" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#93c9b7", + "t": "#000000", + "h": 1.5 + }, + ";\n:", + { + "x": 4.5, + "h": 1.5 + }, + "_\n-" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#a7d0db", + "a": 4, + "f": 3 + }, + "\"\n'", + { + "x": 10.5, + "a": 6, + "f": 3 + }, + "V" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 6 + }, + "Q", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 4 + }, + "<\n,", + { + "x": 8.5, + "a": 6 + }, + "K", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "J" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000", + "a": 4 + }, + ">\n.", + { + "x": 6.5, + "a": 6 + }, + "B" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "f": 9, + "w": 1.5, + "g": true + }, + "", + { + "c": "#ffb2d2", + "t": "#0d0d0b", + "a": 6, + "f": 3, + "g": false + }, + "Z", + { + "x": 14.5, + "a": 4 + }, + "?\n/", + { + "c": "#ffb07b", + "t": "#000000", + "f": 9, + "g": true, + "w": 1.5, + "a": 4 + }, + "" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#d9dae0", + "g": true, + "a": 7, + "f": 3 + }, + "", + { + "x": 10.5 + }, + "" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "", + { + "x": 1, + "c": "#d4872a", + "g": true, + "a": 5 + }, + "", + { + "x": 8.5 + }, + "", + { + "x": 1, + "c": "#d9dae0", + "g": true, + "a": 7 + }, + "" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "", + {}, + "", + { + "x": 14.5 + }, + "", + {}, + "" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#f9cd31", + "g": false + }, + "Alt", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 9 + ] + }, + "\n\n\n" + ], + [ + { + "c": "#d4872a", + "a": 7, + "f": 9, + "h": 2 + }, + "", + { + "h": 2 + }, + "", + { + "c": "#f9cd31", + "f": 3 + }, + "Ctrl" + ], + [ + { + "x": 2, + "c": "#e26757" + }, + "ESC" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "MEDIA", + {}, + "DEL" + ], + [ + { + "x": -3 + }, + "HUN", + { + "c": "#d4872a", + "f": 9, + "h": 2 + }, + "", + { + "f": 3, + "h": 2 + }, + "SPC" + ], + [ + { + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "LEAD" + ] +] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json new file mode 100644 index 000000000..1248d36af --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json @@ -0,0 +1,542 @@ +[ + { + "backcolor": "#ffffff", + "name": "ErgoDox - algernon's layout: Heatmap", + "author": "Gergely Nagy ", + "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea", + "pcb": true, + "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" + }, + [ + { + "x": 3.5, + "c": "#a7d0db", + "fa": [ + 0, + 0, + 2 + ] + }, + "#\n3\nF3", + { + "x": 10.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "*\n8\nF8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "@\n2\nF2", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "$\n4\nF4", + { + "x": 8.5 + }, + "&\n7\nF7", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "(\n9\nF9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "%\n5\nF5", + { + "c": "#f9cd31", + "a": 7, + "f": 2 + }, + "STENO", + { + "x": 4.5, + "f": 3 + }, + "F12", + { + "c": "#7adabd", + "a": 4, + "f": 3, + "fa": [ + 0, + 0, + 2 + ] + }, + "^\n6\nF6" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "f": 6, + "a": 6, + "w": 1.5 + }, + "\n\n", + { + "f": 3, + "t": "#0d0d0b", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + + }, + "!\n1\nF1", + { + "x": 14.5 + }, + ")\n0\nF10", + { + "a": 7, + "w": 1.5 + }, + "F11" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4 + }, + ">\n.", + { + "x": 10.5, + "a": 6 + }, + "C" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 4 + }, + "<\n,", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 6 + }, + "P", + { + "x": 8.5 + }, + "G", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "R" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "Y", + { + "c": "#93c9b7", + "a": 4, + "h": 1.5 + }, + "{\n(\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n)\n]", + { + "c": "#7adabd", + "a": 6 + }, + "F" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "t": "#0d0d0b", + "f": 3, + "w": 1.5 + }, + "\n\n~\n`", + { + "c": "#ffb2d2", + "a": 4, + "f": 3 + }, + "\"\n'", + { + "x": 14.5, + "a": 6 + }, + "L", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "E", + { + "x": 10.5 + }, + "T" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "O", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "n": true + }, + "U", + { + "x": 8.5, + "n": true + }, + "H", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "N" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "I", + { + "x": 6.5 + }, + "D" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "t": "#0d0d0b", + "fa": [ + 6 + ], + "w": 1.5 + }, + "\n\nTab", + { + "f": 3 + }, + "A", + { + "x": 14.5, + "f": 3 + }, + "S", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 6 + ], + "w": 1.5 + }, + "+\n=" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#93c9b7", + "t": "#000000", + "a": 7, + "h": 1.5 + }, + "(", + { + "x": 4.5, + "h": 1.5 + }, + ")" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#a7d0db", + "a": 6 + }, + "J", + { + "x": 10.5 + }, + "W" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "Q", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "K", + { + "x": 8.5 + }, + "M", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "V" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "X", + { + "x": 6.5 + }, + "B" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "f": 9, + "w": 1.5 + }, + "\n\n", + { + "c": "#ffb2d2", + "t": "#0d0d0b", + "a": 4, + "f": 3 + }, + "?\n/", + { + "x": 14.5, + "a": 6 + }, + "Z", + { + "c": "#ffb07b", + "t": "#000000", + "f": 9, + "w": 1.5 + }, + "" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#d9dae0", + "g": true, + "a": 7, + "f": 3 + }, + "", + { + "x": 10.5 + }, + "" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "", + { + "x": 1, + "c": "#d4872a", + "g": false, + "a": 5 + }, + ";\n:", + { + "x": 8.5 + }, + "_\n-", + { + "x": 1, + "c": "#d9dae0", + "g": true, + "a": 7 + }, + "" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "", + {}, + "", + { + "x": 14.5 + }, + "", + {}, + "" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#f9cd31", + "g": false + }, + "Alt", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 9 + ] + }, + "\n\n\n" + ], + [ + { + "c": "#d4872a", + "a": 7, + "f": 9, + "h": 2 + }, + "", + { + "h": 2 + }, + "", + { + "c": "#f9cd31", + "f": 3 + }, + "Ctrl" + ], + [ + { + "x": 2, + "c": "#e26757" + }, + "ESC" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "MEDIA", + {}, + "DEL" + ], + [ + { + "x": -3 + }, + "LEAD", + { + "c": "#d4872a", + "f": 9, + "h": 2 + }, + "", + { + "f": 3, + "h": 2 + }, + "SPC" + ], + [ + { + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "HUN" + ] +] diff --git a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py index a13d12e81..68585843b 100755 --- a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py +++ b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py @@ -3,143 +3,247 @@ import json import os import sys import re +import argparse from math import floor +from os.path import dirname + +class Heatmap(object): + coords = [ + [ + # Row 0 + [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], + [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], + ], + [ + # Row 1 + [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], + [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], + ], + [ + # Row 2 + [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], + [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], + ], + [ + # Row 3 + [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], + [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], + ], + [ + # Row 4 + [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], + [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], + ], + [ + # Row 5 + [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], + [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], + ], + ] + + def set_attr_at(self, block, n, attr, fn, val): + blk = self.heatmap[block][n] + if attr in blk: + blk[attr] = fn(blk[attr], val) + else: + blk[attr] = fn(None, val) + + def coord(self, col, row): + return self.coords[row][col] + + @staticmethod + def set_attr(orig, new): + return new + + def set_bg(self, (block, n), color): + self.set_attr_at(block, n, "c", self.set_attr, color) + #self.set_attr_at(block, n, "g", self.set_attr, False) + + def set_tap_info(self, (block, n), count, cap): + def _set_tap_info(o, _count, _cap): + ns = 4 - o.count ("\n") + return o + "\n" * ns + "%.02f%%" % (float(_count) / float(_cap) * 100) + + if not cap: + cap = 1 + self.heatmap[block][n + 1] = _set_tap_info (self.heatmap[block][n + 1], count, cap) + + @staticmethod + def heatmap_color (v): + colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] + fb = 0 + if v <= 0: + idx1, idx2 = 0, 0 + elif v >= 1: + idx1, idx2 = len(colors) - 1, len(colors) - 1 + else: + val = v * (len(colors) - 1) + idx1 = int(floor(val)) + idx2 = idx1 + 1 + fb = val - float(idx1) + + r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] + g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] + b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] + + r, g, b = [x * 255 for x in r, g, b] + return "#%02x%02x%02x" % (r, g, b) + + def __init__(self, layout): + self.log = {} + self.total = 0 + self.max_cnt = 0 + self.layout = layout + + def update_log(self, (c, r)): + if not (c, r) in self.log: + self.log[(c, r)] = 0 + self.log[(c, r)] = self.log[(c, r)] + 1 + self.total = self.total + 1 + if self.max_cnt < self.log[(c, r)]: + self.max_cnt = self.log[(c, r)] + + def get_heatmap(self): + with open("%s/heatmap-layout.%s.json" % (dirname(sys.argv[0]), self.layout), "r") as f: + self.heatmap = json.load (f) + + ## Reset colors + for row in self.coords: + for coord in row: + if coord != []: + self.set_bg (coord, "#d9dae0") + + for (c, r) in self.log: + coords = self.coord(c, r) + b, n = coords + cap = self.max_cnt + if cap == 0: + cap = 1 + v = float(self.log[(c, r)]) / cap + self.set_bg (coords, self.heatmap_color (v)) + self.set_tap_info (coords, self.log[(c, r)], self.total) + return self.heatmap + + def get_stats(self): + usage = [ + # left hand + [0, 0, 0, 0, 0], + # right hand + [0, 0, 0, 0, 0] + ] + finger_map = [0, 0, 1, 2, 3, 4, 4] + for (c, r) in self.log: + if r == 5: # thumb cluster + if c <= 6: # left side + usage[0][4] = usage[0][4] + self.log[(c, r)] + else: + usage[1][4] = usage[1][4] + self.log[(c, r)] + else: + fc = c + hand = 0 + if fc >= 7: + fc = fc - 7 + hand = 1 + fm = finger_map[fc] + usage[hand][fm] = usage[hand][fm] + self.log[(c, r)] + hand_usage = [0, 0] + for f in usage[0]: + hand_usage[0] = hand_usage[0] + f + for f in usage[1]: + hand_usage[1] = hand_usage[1] + f + + total = self.total + if total == 0: + total = 1 + stats = { + "hands": { + "left": { + "usage": float(hand_usage[0]) / total * 100, + "fingers": { + "0 - pinky": 0, + "1 - ring": 0, + "2 - middle": 0, + "3 - index": 0, + "4 - thumb": 0, + } + }, + "right": { + "usage": float(hand_usage[1]) / total * 100, + "fingers": { + "0 - thumb": 0, + "1 - index": 0, + "2 - middle": 0, + "3 - ring": 0, + "4 - pinky": 0, + } + }, + } + } + + hmap = ['left', 'right'] + fmap = ['0 - pinky', '1 - ring', '2 - middle', '3 - index', '4 - thumb', + '0 - thumb', '1 - index', '2 - middle', '3 - ring', '4 - pinky'] + for hand_idx in range(len(usage)): + hand = usage[hand_idx] + for finger_idx in range(len(hand)): + stats['hands'][hmap[hand_idx]]['fingers'][fmap[finger_idx + hand_idx * 5]] = float(hand[finger_idx]) / total * 100 + return stats + +def dump_all(out_dir, heatmaps): + for layer in heatmaps.keys(): + if len(heatmaps[layer].log) == 0: + continue -cr_coord_map = [ - [ - # Row 0 - [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], - [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], - ], - [ - # Row 1 - [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], - [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], - ], - [ - # Row 2 - [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], - [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], - ], - [ - # Row 3 - [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], - [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], - ], - [ - # Row 4 - [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], - [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], - ], - [ - # Row 5 - [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], - [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], - ], -] - -def set_attr_at(j, b, n, attr, fn, val): - blk = j[b][n] - if attr in blk: - blk[attr] = fn(blk[attr], val) - else: - blk[attr] = fn(None, val) - -def coord(col, row): - return cr_coord_map[row][col] - -def set_attr(orig, new): - return new - -def set_bg(j, (b, n), color): - set_attr_at(j, b, n, "c", set_attr, color) - #set_attr_at(j, b, n, "g", set_attr, False) - -def _set_tap_info(o, count, cap): - ns = 4 - o.count ("\n") - return o + "\n" * ns + "%.02f%%" % (float(count) / float(cap) * 100) - -def set_tap_info(j, (b, n), count, cap): - j[b][n + 1] = _set_tap_info (j[b][n + 1], count, cap) - -def heatmap_color (v): - colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] - fb = 0 - if v <= 0: - idx1, idx2 = 0, 0 - elif v >= 1: - idx1, idx2 = len(colors) - 1, len(colors) - 1 - else: - val = v * (len(colors) - 1) - idx1 = int(floor(val)) - idx2 = idx1 + 1 - fb = val - float(idx1) - - r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] - g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] - b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] - - r, g, b = [x * 255 for x in r, g, b] - return "#%02x%02x%02x" % (r, g, b) - -# Load the keylog -def load_keylog(fname, restrict_row): - keylog = {} - total = 0 - with open(fname, "r") as f: - lines = f.readlines() - for line in lines: - m = re.search ('KL: col=(\d+), row=(\d+)', line) + with open ("%s/%s.json" % (out_dir, layer), "w") as f: + json.dump(heatmaps[layer].get_heatmap(), f) + print >>sys.stderr, "%s stats:" % (layer) + json.dump (heatmaps[layer].get_stats(), sys.stderr, + indent = 4, sort_keys = True) + print >>sys.stderr, "" + print >>sys.stderr, "" + +def main(opts): + + heatmaps = {"Dvorak": Heatmap("Dvorak"), + "ADORE": Heatmap("ADORE") + } + cnt = 0 + restrict_row = opts.restrict_row + out_dir = opts.outdir + + while True: + line = sys.stdin.readline() + if not line: + break + m = re.search ('KL: col=(\d+), row=(\d+), pressed=(\d+), layer=(.*)', line) if not m: continue - (c, r) = (int(m.group (2)), int(m.group (1))) - if restrict_row != None and r != int(restrict_row): + + cnt = cnt + 1 + (c, r, l) = (int(m.group (2)), int(m.group (1)), m.group (4)) + if restrict_row != -1 and r != restrict_row: + continue + if c in opts.ignore_columns: continue - if (c, r) in keylog: - keylog[(c, r)] = keylog[(c, r)] + 1 - else: - keylog[(c, r)] = 1 - total = total + 1 - return total / 2, keylog - -def l_flat(s): - f = s.split("\n") - return ", ".join (f) - -def main(base_fn, log_fn, restrict_row = None): - - with open(base_fn, "r") as f: - layout = json.load (f) - - ## Reset colors - for row in cr_coord_map: - for col in row: - if col != []: - set_bg (layout, col, "#d9dae0") - #set_attr_at (layout, col[0], col[1], "g", set_attr, True) - - total, log = load_keylog (log_fn, restrict_row) - max_cnt = 0 - for (c, r) in log: - max_cnt = max(max_cnt, log[(c, r)]) - - # Create the heatmap - for (c, r) in log: - coords = coord(c, r) - b, n = coords - cap = max_cnt - v = float(log[(c, r)]) / cap - print >> sys.stderr, "%s => %d/%d => %f = %s" % (l_flat(layout[b][n+1]), log[(c,r)], cap, v, heatmap_color(v)) - set_bg (layout, coord(c, r), heatmap_color (v)) - set_tap_info (layout, coord (c, r), log[(c, r)], total) - - print json.dumps(layout) -if __name__ == "__main__": - if len(sys.argv) < 3: - print """Log to Heatmap -- creates a heatmap out of keyboard logs + heatmaps[l].update_log ((c, r)) + + if opts.dump_interval != -1 and cnt >= opts.dump_interval: + cnt = 0 + dump_all(out_dir, heatmaps) -Usage: log-to-heatmap.py base-layout.json logfile [row] >layout.json""" - sys.exit (1) - main(*sys.argv[1:]) + dump_all (out_dir, heatmaps) + +if __name__ == "__main__": + parser = argparse.ArgumentParser (description = "keylog to heatmap processor") + parser.add_argument ('outdir', action = 'store', + help = 'Output directory') + parser.add_argument ('--row', dest = 'restrict_row', action = 'store', type = int, + default = -1, help = 'Restrict processing to this row only') + parser.add_argument ('--dump-interval', dest = 'dump_interval', action = 'store', type = int, + default = 100, help = 'Dump stats and heatmap at every Nth event, -1 for dumping at EOF only') + parser.add_argument ('--ignore-column', dest = 'ignore_columns', action = 'append', type = int, + default = [], help = 'Ignore the specified columns') + args = parser.parse_args() + main(args) -- cgit v1.2.3 From 5b58d7d1458502ad52b7a8e2be52afab17dc51a5 Mon Sep 17 00:00:00 2001 From: coderkun Date: Sun, 21 Aug 2016 19:31:34 +0200 Subject: Disable debugging for Ergodox keymap “coderkun_neo2” --- keyboards/ergodox/keymaps/coderkun_neo2/Makefile | 1 + keyboards/ergodox/keymaps/coderkun_neo2/keymap.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/Makefile b/keyboards/ergodox/keymaps/coderkun_neo2/Makefile index 6c0a79b11..b0fe90ab1 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/Makefile +++ b/keyboards/ergodox/keymaps/coderkun_neo2/Makefile @@ -1,2 +1,3 @@ SLEEP_LED_ENABLE = no UNICODE_ENABLE = yes +COMMAND_ENABLE = no diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c index 2ac06eef8..90651956a 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c +++ b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c @@ -1,5 +1,4 @@ #include "ergodox.h" -#include "debug.h" #include "action_layer.h" #include "led.h" #include "keymap_extras/keymap_neo2.h" -- cgit v1.2.3 From c78b44fb18194fb130ec3c49c38abc5afb6fee34 Mon Sep 17 00:00:00 2001 From: coderkun Date: Sun, 21 Aug 2016 20:39:09 +0200 Subject: Set Unicode input mode and override unicode_input_start() method to keymap “coderkun_neo2” --- keyboards/ergodox/keymaps/coderkun_neo2/keymap.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c index 90651956a..b665a5f3a 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c +++ b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c @@ -155,8 +155,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [FMU] = KEYMAP( // left hand KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2713),KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2715),KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2715),KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2713),KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MS_L, KC_MS_U, @@ -244,6 +244,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // Runs just one time when the keyboard initializes. void matrix_init_user(void) { + set_unicode_input_mode(UC_LNX); }; @@ -278,3 +279,14 @@ void matrix_scan_user(void) } }; + + +// Override Unicode start method to use NEO_U instead of KC_U +void unicode_input_start (void) { + register_code(KC_LCTL); + register_code(KC_LSFT); + register_code(NEO_U); + unregister_code(NEO_U); + unregister_code(KC_LSFT); + unregister_code(KC_LCTL); +}; -- cgit v1.2.3 From 137eb118e352201f7d324743e34ed57e6885b689 Mon Sep 17 00:00:00 2001 From: coderkun Date: Fri, 26 Aug 2016 13:26:16 +0200 Subject: Add box-drawing Unicode characters to keymap “coderkun_neo2” --- keyboards/ergodox/keymaps/coderkun_neo2/keymap.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c index b665a5f3a..0eedecf3d 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c +++ b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c @@ -137,11 +137,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬───────┐ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ - * │ │ │ │ │ ✕ │ │ │ │ │ │ F9 │ F10 │ F11 │ F12 │ │ + * │ │ ┌ │ ┬ │ ┐ │ ─ │ │ │ │ │ │ │ F9 │ F10 │ F11 │ F12 │ │ * ├───────┼─────┼─────┼─────╆─────╅─────┤ │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ - * │ │ │ │ │ ✓ │ ├─────┤ ├─────┤ │ F5 │ F6 │ F7 │ F8 │ │ + * │ │ ├ │ ┼ │ ┤ │ ✓ │ ✕ ├─────┤ ├─────┤ │ F5 │ F6 │ F7 │ F8 │ │ * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│ │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤ - * │ │ │ │ │ │ │ │ │ │ │ F1 │ F2 │ F3 │ F4 │ │ + * │ │ └ │ ┴ │ ┘ │ │ │ │ │ │ │ F1 │ F2 │ F3 │ F4 │ │ * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ * │ │ │(MO1)│ │(MO4)│ │(MO4)│ │(MO1)│ │ │ * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘ @@ -155,9 +155,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [FMU] = KEYMAP( // left hand KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2715),KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2713),KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, UC(0x250C),UC(0x252C),UC(0x2510),UC(0x2500),UC(0x2502),KC_TRNS, + KC_TRNS, UC(0x251C),UC(0x253C),UC(0x2524),UC(0x2713),UC(0x2715), + KC_TRNS, UC(0x2514),UC(0x2534),UC(0x2518),KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MS_L, KC_MS_U, KC_BTN1, -- cgit v1.2.3 From e9ce4960c15066c14c775b1d769f1f89ec450787 Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Mon, 5 Sep 2016 17:40:03 -0400 Subject: Add new ErgoDox EZ keymap, YORUIAN --- .../keymaps/yoruian/90-ergodox-yoruian.conf | 6 ++ keyboards/ergodox/keymaps/yoruian/Makefile | 13 +++ keyboards/ergodox/keymaps/yoruian/README | 102 +++++++++++++++++++++ keyboards/ergodox/keymaps/yoruian/ergodox_yoruian | 34 +++++++ keyboards/ergodox/keymaps/yoruian/keymap.c | 61 ++++++++++++ keyboards/ergodox/keymaps/yoruian/yoruian.h | 61 ++++++++++++ 6 files changed, 277 insertions(+) create mode 100644 keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf create mode 100644 keyboards/ergodox/keymaps/yoruian/Makefile create mode 100644 keyboards/ergodox/keymaps/yoruian/README create mode 100644 keyboards/ergodox/keymaps/yoruian/ergodox_yoruian create mode 100644 keyboards/ergodox/keymaps/yoruian/keymap.c create mode 100644 keyboards/ergodox/keymaps/yoruian/yoruian.h (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf new file mode 100644 index 000000000..c8a92c5c5 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf @@ -0,0 +1,6 @@ +Section "InputClass" + Identifier "ErgoDox EZ" + MatchIsKeyboard "on" + MatchProduct "ErgoDox EZ ErgoDox EZ" + Option "XkbLayout" "ergodox_ez_yoruian" +EndSection diff --git a/keyboards/ergodox/keymaps/yoruian/Makefile b/keyboards/ergodox/keymaps/yoruian/Makefile new file mode 100644 index 000000000..b43a24c61 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/Makefile @@ -0,0 +1,13 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +install-xorg-configuration: + install -m 0664 90-$(KEYBOARD)-$(KEYMAP).conf \ + /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf + install -m 0644 $(KEYBOARD)_$(KEYMAP) \ + /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP) + +uninstall-xorg-configuration: + -rm -f /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf + -rm -f /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP) diff --git a/keyboards/ergodox/keymaps/yoruian/README b/keyboards/ergodox/keymaps/yoruian/README new file mode 100644 index 000000000..99b41434e --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/README @@ -0,0 +1,102 @@ + Snarfangel's YORUIAN for the ErgoDox EZ + ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ +DEFAULT +┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ ┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ +┃ ` │ ; │ : │ - │ / │ ( │ < ┃ ┃ > │ ) │ ^ │ * │ ~ │ Γ │ σ ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ ⎋ │ . │ y │ o │ r │ ? │ ✦ ┃ ┃ ✦ │ j │ v │ d │ f │ w │ q ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ ⎈ │ u │ i │ a │ n │ ! ├───┨ ┠───┤ m │ h │ t │ s │ c │ ⎈ ┃ +┠───┼───┼───┼───┼───┼───┤ ❖ ┃ ┃ ❖ ├───┼───┼───┼───┼───┼───┨ +┃ λ │ ' │ " │ , │ _ │ = │ ┃ ┃ │ k │ l │ p │ g │ b │ x ┃ +┠───┼───┼───┼───┼───╆━━━┷━━━┛ ┗━━━┷━━━╅───┼───┼───┼───┼───┨ +┃ ⎀ │ E │ │ │ ◆ ┃ ┃ ◆ │ │ │ z │ ⎙ ┃ +┗━━━┷━━━┷━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┷━━━┷━━━┛ + ┏━━━┯━━━┓ ┏━━━┯━━━┓ + ┃ ⌫ │ ⌥ ┃ ┃ ⎄ │ ↹ ┃ + ┏━━━╃───┼───┨ ┠───┼───╄━━━┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ e │ ⇧ ├───┨ ┠───┤ ⏎ │ ␣ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + ┗━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┛ +SHIFTED +┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ ┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ +┃ 9 │ 7 │ 5 │ 3 │ 1 │ [ │ { ┃ ┃ } │ ] │ 0 │ 2 │ 4 │ 6 │ 8 ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ │ * │ Y │ O │ R │ \ │ ┃ ┃ │ J │ V │ D │ F │ W │ Q ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ U │ I │ A │ N │ | ├───┨ ┠───┤ M │ H │ T │ S │ C │ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ # │ $ │ @ │ & │ + │ ┃ ┃ │ K │ L │ P │ G │ B │ X ┃ +┠───┼───┼───┼───┼───╆━━━┷━━━┛ ┗━━━┷━━━╅───┼───┼───┼───┼───┨ +┃ │ │ │ │ ┃ ┃ │ │ │ Z │ ┃ +┗━━━┷━━━┷━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┷━━━┷━━━┛ + ┏━━━┯━━━┓ ┏━━━┯━━━┓ + ┃ │ ┃ ┃ │ ┃ + ┏━━━╃───┼───┨ ┠───┼───╄━━━┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ │ ├───┨ ┠───┤ │ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + ┗━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┛ +λ LAYER +┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ ┏━━━┯━━━┯━━━┯━━━┯━━━┯━━━┯━━━┓ +┃ │ │ │ │ │ │ ┃ ┃ │ │ ⑤ │ ⑥ │ ⑦ │ ⑧ │ ⑨ ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ │ │ │ │ │ │ ┃ ┃ │ │ ① │ ② │ ③ │ ④ │ ⑩ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ │ │ │ │ ├───┨ ┠───┤ ⎉ │ ← │ ↓ │ ↑ │ → │ ⑪ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ λ │ │ │ │ │ │ ┃ ┃ │ │ ⇱ │ ⎘ │ ⎗ │ ⇲ │ ⑫ ┃ +┠───┼───┼───┼───┼───╆━━━┷━━━┛ ┗━━━┷━━━╅───┼───┼───┼───┼───┨ +┃ │ │ │ │ ┃ ┃ │ │ │ │ ┃ +┗━━━┷━━━┷━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┷━━━┷━━━┛ + ┏━━━┯━━━┓ ┏━━━┯━━━┓ + ┃ │ ┃ ┃ │ ┃ + ┏━━━╃───┼───┨ ┠───┼───╄━━━┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ │ ├───┨ ┠───┤ │ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + ┗━━━┷━━━┷━━━┛ ┗━━━┷━━━┷━━━┛ + +Installation (X only) +‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ + 1. Build and flash firmware as usual + + 2. sudo make install-xorg-configuration + + 3. Restart X + +Features +‾‾‾‾‾‾‾‾ + • E on the thumb + + • Emacs-friendly + + • Symmetric control keys for finger wear levelling + + • Greek and subscript dead keys + + • Compose key for arbitrary Unicode input via ~/.XCompose + +Don't Cares +‾‾‾‾‾‾‾‾‾‾‾ + • Easy migration from QWERTY + + • Compatbility with non-XKB systems + + • Mouse emulation + + • Media keys + +Acknowledgements +‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ +Snarfangel, for designing the layout. + +The GNU FreeFont project and Steve White, for adding new keyboard +symbols. + +Xah Lee, for http://xahlee.info/comp/unicode_computing_symbols.html + +Colophon +‾‾‾‾‾‾‾‾ +This file is best-viewed with an SVN version of GNU FreeFont Mono. diff --git a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian new file mode 100644 index 000000000..734314394 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian @@ -0,0 +1,34 @@ +partial alphanumeric_keys modifier_keys +xkb_symbols "ergodox_ez_yoruian" { + include "us" + name[Group1]= "English (yoruian-1.0.0)"; + + replace key { [ Multi_key, Multi_key ] }; + replace key { [ Hyper_L, Hyper_L ] }; + replace key { [ grave, 9 ] }; + replace key { [ semicolon, 7 ] }; + replace key { [ colon, 5 ] }; + replace key { [ minus, 3 ] }; + replace key { [ slash, 1 ] }; + replace key { [ asciicircum, 0 ] }; + replace key { [ percent, 2 ] }; + replace key { [ asciitilde, 4 ] }; + replace key { [ dead_greek, 6 ] }; + replace key { [ dead_caron, 8 ] }; + replace key { [ E, E ] }; + replace key { [ period, asterisk ] }; + replace key { [ question, backslash ] }; + replace key { [ exclam, bar ] }; + replace key { [ apostrophe, numbersign ] }; + replace key { [ quotedbl, dollar ] }; + replace key { [ comma, at ] }; + replace key { [ underscore, ampersand ] }; + replace key { [ equal, plus ] }; + replace key { [ parenleft, bracketleft ] }; + replace key { [ less, braceleft ] }; + replace key { [ greater, braceright ] }; + replace key { [ parenright, bracketright ] }; + + modifier_map none { }; + modifier_map Mod3 { }; +}; diff --git a/keyboards/ergodox/keymaps/yoruian/keymap.c b/keyboards/ergodox/keymaps/yoruian/keymap.c new file mode 100644 index 000000000..d3635ddf3 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/keymap.c @@ -0,0 +1,61 @@ +/* + * Copyright 2016 Thomas Fitzsimmons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "yoruian.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP\ +(9, 7, 5, 3, 1, GRV, MINS, EQL, LBRC, 0, 2, 4, 6, 8, + ES, RBRC, Y, O, R, BSLS, P3, P3, J, V, D, F, W, Q, + LC, U, I, A, N, SCLN, M, H, T, S, C, RC, + FF, QUOT, COMM, DOT, SLSH, P0, LGUI, LGUI, K, L, P, G, B, X, + IN, P1, NO, NO, LALT, LALT, NO, NO, Z, PS, + BSPC, RALT, P2, TAB, + NO, NO, + E, LSFT, NO, NO, ENT, SPC), +[1] = KEYMAP\ +(TR, TR, TR, TR, TR, TR, TR, TR, TR, F5, F6, F7, F8, F9, + TR, TR, TR, TR, TR, TR, TR, TR, TR, F1, F2, F3, F4, FT, + TR, TR, TR, TR, TR, TR, PAUS, LEFT, DOWN, UP, RGHT, FE, + TR, TR, TR, TR, TR, TR, TR, TR, TR, HOME, PGDN, PGUP, END, FW, + TR, TR, TR, TR, TR, TR, TR, TR, TR, TR, + TR, TR, TR, TR, + TR, TR, + TR, TR, TR, TR, TR, TR), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; + +void matrix_init_user(void) { +}; + +void matrix_scan_user(void) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); +}; + +/* + * Local Variables: + * electric-indent-mode: nil + * End: + */ diff --git a/keyboards/ergodox/keymaps/yoruian/yoruian.h b/keyboards/ergodox/keymaps/yoruian/yoruian.h new file mode 100644 index 000000000..1adcb7fd3 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/yoruian.h @@ -0,0 +1,61 @@ +/* + * Copyright 2016 Thomas Fitzsimmons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#undef KEYMAP +#define KEYMAP\ +( \ + /* Spacial positions. */ \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k28, k29, k2A, k2B, k2C, k2D, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k43, k44, k49, k4A, k4B, k4C, k4D, \ + k55, k56, k57, k58, \ + k54, k59, \ + k53, k52, k51, k5C, k5B, k5A) \ + \ + /* Matrix positions. */ \ + { \ + { KC_##k00, KC_##k10, KC_##k20, KC_##k30, KC_##k40, KC_NO }, \ + { KC_##k01, KC_##k11, KC_##k21, KC_##k31, KC_##k41, KC_##k51 }, \ + { KC_##k02, KC_##k12, KC_##k22, KC_##k32, KC_##k42, KC_##k52 }, \ + { KC_##k03, KC_##k13, KC_##k23, KC_##k33, KC_##k43, KC_##k53 }, \ + { KC_##k04, KC_##k14, KC_##k24, KC_##k34, KC_##k44, KC_##k54 }, \ + { KC_##k05, KC_##k15, KC_##k25, KC_##k35, KC_NO, KC_##k55 }, \ + { KC_##k06, KC_##k16, KC_NO, KC_##k36, KC_NO, KC_##k56 }, \ + { KC_##k07, KC_##k17, KC_NO, KC_##k37, KC_NO, KC_##k57 }, \ + { KC_##k08, KC_##k18, KC_##k28, KC_##k38, KC_NO, KC_##k58 }, \ + { KC_##k09, KC_##k19, KC_##k29, KC_##k39, KC_##k49, KC_##k59 }, \ + { KC_##k0A, KC_##k1A, KC_##k2A, KC_##k3A, KC_##k4A, KC_##k5A }, \ + { KC_##k0B, KC_##k1B, KC_##k2B, KC_##k3B, KC_##k4B, KC_##k5B }, \ + { KC_##k0C, KC_##k1C, KC_##k2C, KC_##k3C, KC_##k4C, KC_##k5C }, \ + { KC_##k0D, KC_##k1D, KC_##k2D, KC_##k3D, KC_##k4D, KC_NO } \ + } + +#define KC_ES KC_ESC +#define KC_LC KC_LCTL +#define KC_RC KC_RCTL +#define KC_FF MO(1) +#define KC_IN KC_INS +#define KC_PS KC_PSCR +#define KC_TR KC_TRNS +#define KC_FT KC_F10 +#define KC_FE KC_F11 +#define KC_FW KC_F12 -- cgit v1.2.3 From ce53c0643d4eaf8f13ac1140d3bd91dfa5f90e22 Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Tue, 6 Sep 2016 00:09:14 -0400 Subject: Fix ergodox_yoruian XKB naming --- keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf | 2 +- keyboards/ergodox/keymaps/yoruian/ergodox_yoruian | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf index c8a92c5c5..ce4fce3b1 100644 --- a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf +++ b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf @@ -2,5 +2,5 @@ Section "InputClass" Identifier "ErgoDox EZ" MatchIsKeyboard "on" MatchProduct "ErgoDox EZ ErgoDox EZ" - Option "XkbLayout" "ergodox_ez_yoruian" + Option "XkbLayout" "ergodox_yoruian" EndSection diff --git a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian index 734314394..0d13fbfd4 100644 --- a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian +++ b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian @@ -1,5 +1,5 @@ partial alphanumeric_keys modifier_keys -xkb_symbols "ergodox_ez_yoruian" { +xkb_symbols "ergodox_yoruian" { include "us" name[Group1]= "English (yoruian-1.0.0)"; -- cgit v1.2.3 From a3e7042084ac2a117cea129e4dd4995904f247e8 Mon Sep 17 00:00:00 2001 From: joar Date: Tue, 6 Sep 2016 16:00:08 +0200 Subject: norwegian programmer-friendly layout --- .../keyboard-layout.png | Bin 0 -> 140077 bytes .../keymaps/norwegian_programmer_osx_pc/keymap.c | 180 +++++++++++++++++++++ .../keymaps/norwegian_programmer_osx_pc/readme.md | 30 ++++ .../keyboard-layout.png | Bin 0 -> 97519 bytes .../norwegian_programmer_osx_pc_colemak/keymap.c | 180 +++++++++++++++++++++ .../norwegian_programmer_osx_pc_colemak/readme.md | 30 ++++ 6 files changed, 420 insertions(+) create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c create mode 100644 keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png new file mode 100644 index 000000000..544b5658e Binary files /dev/null and b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png differ diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c new file mode 100644 index 000000000..1d505f8e3 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c @@ -0,0 +1,180 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_FUNC 2 // numbers and function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | * | [ | ] | { | } | ~ |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | + | Q | W | E | R | T | " | | ' | Y | U | I | O | P | Å | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | / | A | S | D | F | G |------| |------| H | J | K | L | Ø | Æ | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | - | Z | X | C | V | B | | | | N | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Alt/esc| ! | ? | : | TAB | | LEFT | _ | & | | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | # | ` | |Insert| % | + * ,------|------|------| |------+-------+------. + * | | | ´ | | Del | | | + * | Shift|Ctrl/.|------| |------| Enter |Space | + * | | |GUI/, | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_PAST, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, KC_FN2, TG(1), + KC_PPLS, KC_Q, KC_W, KC_E, KC_R, KC_T, NO_QUO2, + KC_PSLS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_PMNS, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + ALT_T(KC_ESC), KC_EXLM , NO_QUES, NO_COLN, KC_TAB, + KC_HASH, KC_FN7, + KC_FN6, + KC_FN1,CTL_T(KC_DOT),GUI_T(KC_COMMA), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AA , + KC_H, KC_J, KC_K, KC_L, NO_OSLH, NO_AE, + NO_EQL, KC_N, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, + KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), + KC_INSERT, KC_PERC, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MACS (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | |,/Ctrl| | | | ` | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | ` | | | | + * ,------|------|------| |------+------+------. + * | | | ´ | | | | | + * | |GUI/. |------| |------| | | + * | | |crtl/,| | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, NO_GRV_MAC, + KC_FN10, + KC_TRNS,GUI_T(KC_DOT) , CTL_T(KC_COMMA), + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NO_BSLS_MAC, + KC_TRNS, KC_TRNS, KC_TRNS, NO_PIPE_MAC, OSL(2), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++´ánd Fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 8 | 7 | 6 | 5 | 9 | | | | | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 4 | 3 | 2 | 1 | 0 |------| |------| | F1 | F2 | F3 | F4 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_FUNC] = KEYMAP( + NO_ASTR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + NO_PLUS, KC_8, KC_7,KC_6,KC_5, KC_9 , KC_TRNS, + NO_SLSH , KC_4 , KC_3 , KC_2 , KC_1 , KC_0, + NO_MINS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_F5, KC_F6 , KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS, KC_HOME, KC_TRNS, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md new file mode 100644 index 000000000..f7e8baf56 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md @@ -0,0 +1,30 @@ +# Norwegian setup with osx/pc toggle + +## Motivation +I wanted a Norwegian setup that worked in a similar way on both my Mac and PC. I also wanted the keyboard to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb or the wrist. +- Navigation is prioritized, arrows below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(on a PC(Windows or Linux) or Mac. Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Since symbols are prioritized in this setup, numbers and function keys are on a new layer. The easiest way to use the layer switch(and also the alt key), is to push your hand right below the little finger, on the key. You will then have all your fingers free to type numbers or press function keys. + +## Tap-shift +Tap for the next character to be shifted, hold down for regular shift. + +## Comma dot and escape +Comma, dot and escape share buttons with modifier keys. Tap to access these keys, hold down to use the keys as modifier keys. + +## Numpad symbols ++-/* are implemented with the numpad keycodes. The benefit is that they will work better with shortcuts in certain programs. For some reason, the default setting in the osx terminal is to not accept numpad characters for '/' and '-'. For a solution, see https://discussions.apple.com/thread/6613968?start=0&tstart=0. +If you really need the norwegian symbols in a program, you can access them using the number toggle button. + +## Layout + +![keyboard-layout](keyboard-layout.png) diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png new file mode 100644 index 000000000..462de5c56 Binary files /dev/null and b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png differ diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c new file mode 100644 index 000000000..acf74a47d --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c @@ -0,0 +1,180 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_FUNC 2 // numbers and function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | * | [ | ] | { | } | ~ |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | + | Q | W | F | P | G | " | | ' | J | L | U | Y | Å | Æ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | / | A | R | S | T | D |------| |------| H | N | E | I | O | Ø | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | - | Z | X | C | V | B | | | | K | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Alt/esc| ! | ? | : | TAB | | LEFT | _ | & | | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | # | ` | |Insert| % | + * ,------|------|------| |------+-------+------. + * | | | ´ | | Del | | | + * | Shift|Ctrl/.|------| |------| Enter |Space | + * | | |GUI/, | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_PAST, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, KC_FN2, TG(1), + KC_PPLS, KC_Q, KC_W, KC_F, KC_P, KC_G, NO_QUO2, + KC_PSLS, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_PMNS, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + ALT_T(KC_ESC), KC_EXLM , NO_QUES, NO_COLN, KC_TAB, + KC_HASH, KC_FN7, + KC_FN6, + KC_FN1,CTL_T(KC_DOT),GUI_T(KC_COMMA), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_J, KC_L, KC_U, KC_Y, NO_AA, NO_AE , + KC_H, KC_N, KC_E, KC_I, KC_O, NO_OSLH, + NO_EQL, KC_K, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, + KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), + KC_INSERT, KC_PERC, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MAC (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | |,/Ctrl| | | | ` | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | ` | | | | + * ,------|------|------| |------+------+------. + * | | | ´ | | | | | + * | |GUI/. |------| |------| | | + * | | |crtl/,| | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, NO_GRV_MAC, + KC_FN10, + KC_TRNS,GUI_T(KC_DOT) , CTL_T(KC_COMMA), + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NO_BSLS_MAC, + KC_TRNS, KC_TRNS, KC_TRNS, NO_PIPE_MAC, OSL(2), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++´ánd Fn layer pc + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 8 | 7 | 6 | 5 | 9 | | | | | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 4 | 3 | 2 | 1 | 0 |------| |------| | F1 | F2 | F3 | F4 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_FUNC] = KEYMAP( + NO_ASTR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + NO_PLUS, KC_8, KC_7,KC_6,KC_5, KC_9 , KC_TRNS, + NO_SLSH , KC_4 , KC_3 , KC_2 , KC_1 , KC_0, + NO_MINS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_F5, KC_F6 , KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS, KC_HOME, KC_TRNS, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md new file mode 100644 index 000000000..aaaec3e53 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md @@ -0,0 +1,30 @@ +# Norwegian Colemak setup with osx/pc toggle + +## Motivation +I wanted a Norwegian Colemak setup that worked in a similar way on both my Mac and PC. I also wanted the keyboard to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb or the wrist. +- Navigation is prioritized, arrows below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(not colemak software variants) on a PC(Windows or Linux) or Mac. Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Since symbols are prioritized in this setup, numbers and function keys are on a new layer. The easiest way to use the layer switch(and also the alt key), is to push your hand right below the little finger, on the key. You will then have all your fingers free to type numbers or press function keys. + +## Tap-shift +Tap for the next character to be shifted, hold down for regular shift. + +## Comma dot and escape +Comma, dot and escape share buttons with modifier keys. Tap to access these keys, hold down to use the keys as modifier keys. + +## Numpad symbols ++-/* are implemented with the numpad keycodes. The benefit is that they will work better with shortcuts in certain programs. For some reason, the default setting in the osx terminal is to not accept numpad characters for '/' and '-'. For a solution, see https://discussions.apple.com/thread/6613968?start=0&tstart=0. +If you really need the norwegian symbols in a program, you can access them using the number toggle button. + +## Layout + +![keyboard-layout](keyboard-layout.png) -- cgit v1.2.3 From da16733e7ab66ebd27fde21312990f5733966a52 Mon Sep 17 00:00:00 2001 From: Roman Zolotarev Date: Wed, 7 Sep 2016 07:55:22 +0800 Subject: Change CTL_T(KC_ESC) to KC_LCTRL and update readme --- .../keymaps/romanzolotarev-norman-osx/keymap.c | 30 +++++++++--------- .../keymaps/romanzolotarev-norman-osx/readme.md | 37 +++++++++++++++------- 2 files changed, 40 insertions(+), 27 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c index 24d0c4ecb..2c6430440 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c @@ -6,23 +6,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = KEYMAP( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, - KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, - CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, - KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, + KC_LCTRL, KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, // - /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, - /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, - /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, - /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, - KC_MPLY, KC_MNXT, + /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_MPLY, KC_MNXT, KC_MPRV, - KC_RALT, KC_QUOT, KC_SPC + KC_RALT, KC_QUOT, KC_SPC ) }; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md index 80475ab21..a86061285 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -1,28 +1,41 @@ # Roman's Layout -There is only one layer based on [Norman layout](https://normanlayout.info/). +There is only one layer, and it is based on [Norman +layout](https://normanlayout.info/). Looking for multiple-layer layouts? -- [Symbols, arrows, plover, HJKL arrows](../romanzolotarev-norman-plover-osx-hjkl/) +- [Symbols, arrows, plover, HJKL + arrows](../romanzolotarev-norman-plover-osx-hjkl/) - [Same with IJKL arrows](../romanzolotarev-norman-plover-osx/) [![keyboard-layout](romanzolotarev-norman-osx.png)](http://www.keyboard-layout-editor.com/#/gists/9e89d54f1ea6eeeb7dab1b2d19d28195) -## Functional Keys +## How to use Vim key -- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). -- Tap `F2` to copy screenshot to the clipboard. -- Hold `SHIFT` and tap `F2` to save screenshot as a file. -- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). - -## CTRL/ESC - -CTRL and ESC are frequently used in Vim. +It is `CTL_T(KC_ESC)` and it works this way: - Tap `CTRL/ESC` to send `ESC`. - Hold `CTRL/ESC` to use as `CTRL`. -## Activate N-rollover +## How to activate N-rollover - Hold left `SHIFT` and right `SHIRT` and then tap `N`. + +## How to make and flash on OS X + +First you need to install few brew packages. + +```bash +brew tap osx-cross/avr +brew install dfu-programmer avr-libc teensy_loader_cli +``` + +Then you can clone this repository, make and flash your ErgoDox. + +```bash +git clone https://github.com/romanzolotarev/qmk_firmware +cd qmk_firmware/keyboards/ergodox +# Optionally tweak ./keymaps/romanzolotarev-norman-osx/keymap.c +SLEEP_LED_ENABLED=no KEYMAP=romanzolotarev-norman-osx make teensy +``` -- cgit v1.2.3 From 1406118c7123359cd66d589d22d6ecfa268e3a24 Mon Sep 17 00:00:00 2001 From: profet23 Date: Tue, 6 Sep 2016 21:59:23 -0400 Subject: Removing separate ergodox80 project. Created KEYMAP_80 in ez.h to support 80 key ergodoxes. Creating default_80 keymap as ez keymap. --- keyboards/ergodox/ez/ez.h | 41 ++ .../ergodox/ez/keymaps/default_80/ergodox80.png | Bin 0 -> 20663 bytes keyboards/ergodox/ez/keymaps/default_80/keymap.c | 183 ++++++ keyboards/ergodox/ez/keymaps/default_80/readme.md | 10 + keyboards/ergodox80/Makefile | 5 - keyboards/ergodox80/config.h | 31 - keyboards/ergodox80/ergodox80.c | 0 keyboards/ergodox80/ergodox80.h | 5 - keyboards/ergodox80/ergodox80/190hotfix.sh | 19 - keyboards/ergodox80/ergodox80/Makefile | 3 - keyboards/ergodox80/ergodox80/config.h | 65 -- keyboards/ergodox80/ergodox80/ergodox80.c | 85 --- keyboards/ergodox80/ergodox80/ergodox80.h | 122 ---- keyboards/ergodox80/ergodox80/i2cmaster.h | 178 ------ keyboards/ergodox80/ergodox80/matrix.c | 382 ----------- keyboards/ergodox80/ergodox80/rules.mk | 76 --- keyboards/ergodox80/ergodox80/twimaster.c | 208 ------ .../ergodox80/ergodox80/util/compile_keymap.py | 710 --------------------- keyboards/ergodox80/ergodox80/util/readme.md | 3 - keyboards/ergodox80/keymaps/default/keymap.c | 183 ------ keyboards/ergodox80/readme.md | 6 - keyboards/ergodox80/rules.mk | 28 - 22 files changed, 234 insertions(+), 2109 deletions(-) create mode 100644 keyboards/ergodox/ez/keymaps/default_80/ergodox80.png create mode 100644 keyboards/ergodox/ez/keymaps/default_80/keymap.c create mode 100644 keyboards/ergodox/ez/keymaps/default_80/readme.md delete mode 100644 keyboards/ergodox80/Makefile delete mode 100644 keyboards/ergodox80/config.h delete mode 100644 keyboards/ergodox80/ergodox80.c delete mode 100644 keyboards/ergodox80/ergodox80.h delete mode 100755 keyboards/ergodox80/ergodox80/190hotfix.sh delete mode 100644 keyboards/ergodox80/ergodox80/Makefile delete mode 100644 keyboards/ergodox80/ergodox80/config.h delete mode 100644 keyboards/ergodox80/ergodox80/ergodox80.c delete mode 100644 keyboards/ergodox80/ergodox80/ergodox80.h delete mode 100644 keyboards/ergodox80/ergodox80/i2cmaster.h delete mode 100644 keyboards/ergodox80/ergodox80/matrix.c delete mode 100644 keyboards/ergodox80/ergodox80/rules.mk delete mode 100644 keyboards/ergodox80/ergodox80/twimaster.c delete mode 100644 keyboards/ergodox80/ergodox80/util/compile_keymap.py delete mode 100644 keyboards/ergodox80/ergodox80/util/readme.md delete mode 100644 keyboards/ergodox80/keymaps/default/keymap.c delete mode 100644 keyboards/ergodox80/readme.md delete mode 100644 keyboards/ergodox80/rules.mk (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ez/ez.h b/keyboards/ergodox/ez/ez.h index db4ec867b..124bf850e 100644 --- a/keyboards/ergodox/ez/ez.h +++ b/keyboards/ergodox/ez/ez.h @@ -119,4 +119,45 @@ inline void ergodox_led_all_set(uint8_t n) { k0D, k1D, k2D, k3D, k4D, KC_NO } \ } +#define KEYMAP_80( \ + \ + /* left hand, spatial positions */ \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k45,k46,k54, \ + k53,k52,k51, \ + \ + /* right hand, spatial positions */ \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59,k47,k48, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k10, k20, k30, k40, KC_NO }, \ + { k01, k11, k21, k31, k41, k51 }, \ + { k02, k12, k22, k32, k42, k52 }, \ + { k03, k13, k23, k33, k43, k53 }, \ + { k04, k14, k24, k34, k44, k54 }, \ + { k05, k15, k25, k35, k45, k55 }, \ + { k06, k16, KC_NO, k36, k46, k56 }, \ + \ + { k07, k17, KC_NO, k37, k47, k57 }, \ + { k08, k18, k28, k38, k48, k58 }, \ + { k09, k19, k29, k39, k49, k59 }, \ + { k0A, k1A, k2A, k3A, k4A, k5A }, \ + { k0B, k1B, k2B, k3B, k4B, k5B }, \ + { k0C, k1C, k2C, k3C, k4C, k5C }, \ + { k0D, k1D, k2D, k3D, k4D, KC_NO } \ + } + #endif diff --git a/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png new file mode 100644 index 000000000..66b9752eb Binary files /dev/null and b/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png differ diff --git a/keyboards/ergodox/ez/keymaps/default_80/keymap.c b/keyboards/ergodox/ez/keymaps/default_80/keymap.c new file mode 100644 index 000000000..505ff2972 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/default_80/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | 1 | 2 | Home | | PgUp | 3 | 4 | + * |------|------|------| |------|--------|------| + * | Space| BkSp | End | | PgDn | Tab |Enter | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP_80( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_1, KC_2, KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP,KC_3, KC_4, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * |------|------|------| |------|------|------| + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP_80( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+----------. + * | | | | | | | | + * |------|------|------| |------|------|----------| + * | | | | | | |BrwserBack| + * `--------------------' `------------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP_80( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/default_80/readme.md b/keyboards/ergodox/ez/keymaps/default_80/readme.md new file mode 100644 index 000000000..b6bbb86d2 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/default_80/readme.md @@ -0,0 +1,10 @@ +# ErgoDox 80 Default Configuration + +This is based on the default Ergodox EZ keymap. +The difference is that this keymap supports 80 key layouts. +If you own an 80 key Ergodox, use this as an example to get your desired keymap. + +**NOTE:** This layout is not physically supported by the Ergodox EZ. + + +![Default80](ergodox80.png) diff --git a/keyboards/ergodox80/Makefile b/keyboards/ergodox80/Makefile deleted file mode 100644 index 94fa847ff..000000000 --- a/keyboards/ergodox80/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -SUBPROJECT_DEFAULT = ergodox80 - -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif diff --git a/keyboards/ergodox80/config.h b/keyboards/ergodox80/config.h deleted file mode 100644 index 5dd6daa15..000000000 --- a/keyboards/ergodox80/config.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef KEYBOARDS_ERGODOX_CONFIG_H_ -#define KEYBOARDS_ERGODOX_CONFIG_H_ - -#define MOUSEKEY_DELAY 100 -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 3 -#define MOUSEKEY_TIME_TO_MAX 10 - -#define TAPPING_TOGGLE 1 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -#define TAPPING_TERM 200 -#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ - keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ -) - -#include "ergodox80/config.h" - - -#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox80/ergodox80.c b/keyboards/ergodox80/ergodox80.c deleted file mode 100644 index e69de29bb..000000000 diff --git a/keyboards/ergodox80/ergodox80.h b/keyboards/ergodox80/ergodox80.h deleted file mode 100644 index ea40f4d45..000000000 --- a/keyboards/ergodox80/ergodox80.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_ -#define KEYBOARDS_ERGODOX_ERGODOX_H_ -#include "ergodox80.h" - -#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */ diff --git a/keyboards/ergodox80/ergodox80/190hotfix.sh b/keyboards/ergodox80/ergodox80/190hotfix.sh deleted file mode 100755 index bdc3adce2..000000000 --- a/keyboards/ergodox80/ergodox80/190hotfix.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/bash -#a tool to fix broken keymaps as a result of pull request #190 -#changing the declaration of matrix_scan_user() and matrix_init_user() -# -#This script will save a copy of the specified keymap as keymap.c.bak -#and then create a new keymap.c with the definion corrected. -#this script must be run from the ergodox_ez directory -if [ $# -ne 1 ]; then - echo $0: usage: ./190hotfix keymap_name - exit 1 -fi - -echo Saving backup as ./keymaps/$1/keymap.c.bak ... -mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak - -echo Modifying ./keymaps/$1/keymap.c ... -cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c - -echo Complete! diff --git a/keyboards/ergodox80/ergodox80/Makefile b/keyboards/ergodox80/ergodox80/Makefile deleted file mode 100644 index 191c6bb66..000000000 --- a/keyboards/ergodox80/ergodox80/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/ergodox80/ergodox80/config.h b/keyboards/ergodox80/ergodox80/config.h deleted file mode 100644 index 084a044ee..000000000 --- a/keyboards/ergodox80/ergodox80/config.h +++ /dev/null @@ -1,65 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2013 Oleg Kostyuk - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef ERGODOX_EZ_CONFIG_H -#define ERGODOX_EZ_CONFIG_H - -#include "../config.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1307 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ErgoDox EZ -#define PRODUCT ErgoDox EZ -#define DESCRIPTION QMK keyboard firmware for Ergodox EZ - -/* key matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -#define LED_BRIGHTNESS_LO 15 -#define LED_BRIGHTNESS_HI 255 - - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -//#define DEBUG_MATRIX_SCAN_RATE - -#endif diff --git a/keyboards/ergodox80/ergodox80/ergodox80.c b/keyboards/ergodox80/ergodox80/ergodox80.c deleted file mode 100644 index b21b1073b..000000000 --- a/keyboards/ergodox80/ergodox80/ergodox80.c +++ /dev/null @@ -1,85 +0,0 @@ -#include "ergodox80.h" -#include "i2cmaster.h" - -bool i2c_initialized = 0; -uint8_t mcp23018_status = 0x20; - -void matrix_init_kb(void) { - // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md") - TCCR1A = 0b10101001; // set and configure fast PWM - TCCR1B = 0b00001001; // set and configure fast PWM - - // (tied to Vcc for hardware convenience) - DDRB &= ~(1<<4); // set B(4) as input - PORTB &= ~(1<<4); // set B(4) internal pull-up disabled - - // unused pins - C7, D4, D5, D7, E6 - // set as input with internal pull-ip enabled - DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); - DDRE &= ~(1<<6); - PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); - PORTE |= (1<<6); - - ergodox_blink_all_leds(); - - matrix_init_user(); -} - -void ergodox_blink_all_leds(void) -{ - ergodox_led_all_off(); - ergodox_led_all_set(LED_BRIGHTNESS_HI); - ergodox_right_led_1_on(); - _delay_ms(50); - ergodox_right_led_2_on(); - _delay_ms(50); - ergodox_right_led_3_on(); - _delay_ms(50); - ergodox_right_led_1_off(); - _delay_ms(50); - ergodox_right_led_2_off(); - _delay_ms(50); - ergodox_right_led_3_off(); - //ergodox_led_all_on(); - //_delay_ms(333); - ergodox_led_all_off(); -} - -uint8_t init_mcp23018(void) { - mcp23018_status = 0x20; - - // I2C subsystem - if (i2c_initialized == 0) { - i2c_init(); // on pins D(1,0) - i2c_initialized++; - _delay_ms(1000); - } - - // set pin direction - // - unused : input : 1 - // - input : input : 1 - // - driving : output : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; - i2c_stop(); - - // set pull-up - // - unused : on : 1 - // - input : on : 1 - // - driving : off : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; - -out: - i2c_stop(); - - return mcp23018_status; -} - - diff --git a/keyboards/ergodox80/ergodox80/ergodox80.h b/keyboards/ergodox80/ergodox80/ergodox80.h deleted file mode 100644 index 8012b0a74..000000000 --- a/keyboards/ergodox80/ergodox80/ergodox80.h +++ /dev/null @@ -1,122 +0,0 @@ -#ifndef ERGODOX_EZ_H -#define ERGODOX_EZ_H - -#include "quantum.h" -#include -#include -#include "i2cmaster.h" -#include - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define CPU_16MHz 0x00 - -// I2C aliases and register addresses (see "mcp23018.md") -#define I2C_ADDR 0b0100000 -#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) -#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) -#define IODIRA 0x00 // i/o direction register -#define IODIRB 0x01 -#define GPPUA 0x0C // GPIO pull-up resistor register -#define GPPUB 0x0D -#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) -#define GPIOB 0x13 -#define OLATA 0x14 // output latch register -#define OLATB 0x15 - -extern uint8_t mcp23018_status; - -void init_ergodox(void); -void ergodox_blink_all_leds(void); -uint8_t init_mcp23018(void); -uint8_t ergodox_left_leds_update(void); - -#define LED_BRIGHTNESS_LO 15 -#define LED_BRIGHTNESS_HI 255 - - -inline void ergodox_board_led_on(void) { DDRD |= (1<<6); PORTD |= (1<<6); } -inline void ergodox_right_led_1_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); } -inline void ergodox_right_led_2_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); } -inline void ergodox_right_led_3_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); } -inline void ergodox_right_led_on(uint8_t led) { DDRB |= (1<<(led+4)); PORTB |= (1<<(led+4)); } - -inline void ergodox_board_led_off(void) { DDRD &= ~(1<<6); PORTD &= ~(1<<6); } -inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); } -inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); } -inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); } -inline void ergodox_right_led_off(uint8_t led) { DDRB &= ~(1<<(led+4)); PORTB &= ~(1<<(led+4)); } - -inline void ergodox_led_all_on(void) -{ - ergodox_board_led_on(); - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); -} - -inline void ergodox_led_all_off(void) -{ - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); -} - -inline void ergodox_right_led_1_set(uint8_t n) { OCR1A = n; } -inline void ergodox_right_led_2_set(uint8_t n) { OCR1B = n; } -inline void ergodox_right_led_3_set(uint8_t n) { OCR1C = n; } -inline void ergodox_right_led_set(uint8_t led, uint8_t n) { - (led == 1) ? (OCR1A = n) : - (led == 2) ? (OCR1B = n) : - (OCR1C = n); -} - -inline void ergodox_led_all_set(uint8_t n) -{ - ergodox_right_led_1_set(n); - ergodox_right_led_2_set(n); - ergodox_right_led_3_set(n); -} - -#define KEYMAP( \ - \ - /* left hand, spatial positions */ \ - k00,k01,k02,k03,k04,k05,k06, \ - k10,k11,k12,k13,k14,k15,k16, \ - k20,k21,k22,k23,k24,k25, \ - k30,k31,k32,k33,k34,k35,k36, \ - k40,k41,k42,k43,k44, \ - k55,k56, \ - k45,k46,k54, \ - k53,k52,k51, \ - \ - /* right hand, spatial positions */ \ - k07,k08,k09,k0A,k0B,k0C,k0D, \ - k17,k18,k19,k1A,k1B,k1C,k1D, \ - k28,k29,k2A,k2B,k2C,k2D, \ - k37,k38,k39,k3A,k3B,k3C,k3D, \ - k49,k4A,k4B,k4C,k4D, \ - k57,k58, \ - k59,k47,k48, \ - k5C,k5B,k5A ) \ - \ - /* matrix positions */ \ - { \ - { k00, k10, k20, k30, k40, KC_NO }, \ - { k01, k11, k21, k31, k41, k51 }, \ - { k02, k12, k22, k32, k42, k52 }, \ - { k03, k13, k23, k33, k43, k53 }, \ - { k04, k14, k24, k34, k44, k54 }, \ - { k05, k15, k25, k35, k45, k55 }, \ - { k06, k16, KC_NO, k36, k46, k56 }, \ - \ - { k07, k17, KC_NO, k37, k47, k57 }, \ - { k08, k18, k28, k38, k48, k58 }, \ - { k09, k19, k29, k39, k49, k59 }, \ - { k0A, k1A, k2A, k3A, k4A, k5A }, \ - { k0B, k1B, k2B, k3B, k4B, k5B }, \ - { k0C, k1C, k2C, k3C, k4C, k5C }, \ - { k0D, k1D, k2D, k3D, k4D, KC_NO } \ - } - -#endif diff --git a/keyboards/ergodox80/ergodox80/i2cmaster.h b/keyboards/ergodox80/ergodox80/i2cmaster.h deleted file mode 100644 index 3917b9e6c..000000000 --- a/keyboards/ergodox80/ergodox80/i2cmaster.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef _I2CMASTER_H -#define _I2CMASTER_H 1 -/************************************************************************* -* Title: C include file for the I2C master interface -* (i2cmaster.S or twimaster.c) -* Author: Peter Fleury http://jump.to/fleury -* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device -* Usage: see Doxygen manual -**************************************************************************/ - -#ifdef DOXYGEN -/** - @defgroup pfleury_ic2master I2C Master library - @code #include @endcode - - @brief I2C (TWI) Master Software Library - - Basic routines for communicating with I2C slave devices. This single master - implementation is limited to one bus master on the I2C bus. - - This I2c library is implemented as a compact assembler software implementation of the I2C protocol - which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). - Since the API for these two implementations is exactly the same, an application can be linked either against the - software I2C implementation or the hardware I2C implementation. - - Use 4.7k pull-up resistor on the SDA and SCL pin. - - Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module - i2cmaster.S to your target when using the software I2C implementation ! - - Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. - - @note - The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted - to GNU assembler and AVR-GCC C call interface. - Replaced the incorrect quarter period delays found in AVR300 with - half period delays. - - @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury - - @par API Usage Example - The following code shows typical usage of this library, see example test_i2cmaster.c - - @code - - #include - - - #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet - - int main(void) - { - unsigned char ret; - - i2c_init(); // initialize I2C library - - // write 0x75 to EEPROM address 5 (Byte Write) - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - i2c_write(0x05); // write address = 5 - i2c_write(0x75); // write value 0x75 to EEPROM - i2c_stop(); // set stop conditon = release bus - - - // read previously written value back from EEPROM address 5 - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - - i2c_write(0x05); // write address = 5 - i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode - - ret = i2c_readNak(); // read one byte from EEPROM - i2c_stop(); - - for(;;); - } - @endcode - -*/ -#endif /* DOXYGEN */ - -/**@{*/ - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 -#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" -#endif - -#include - -/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_READ 1 - -/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_WRITE 0 - - -/** - @brief initialize the I2C master interace. Need to be called only once - @param void - @return none - */ -extern void i2c_init(void); - - -/** - @brief Terminates the data transfer and releases the I2C bus - @param void - @return none - */ -extern void i2c_stop(void); - - -/** - @brief Issues a start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_start(unsigned char addr); - - -/** - @brief Issues a repeated start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_rep_start(unsigned char addr); - - -/** - @brief Issues a start condition and sends address and transfer direction - - If device is busy, use ack polling to wait until device ready - @param addr address and transfer direction of I2C device - @return none - */ -extern void i2c_start_wait(unsigned char addr); - - -/** - @brief Send one byte to I2C device - @param data byte to be transfered - @retval 0 write successful - @retval 1 write failed - */ -extern unsigned char i2c_write(unsigned char data); - - -/** - @brief read one byte from the I2C device, request more data from device - @return byte read from I2C device - */ -extern unsigned char i2c_readAck(void); - -/** - @brief read one byte from the I2C device, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_readNak(void); - -/** - @brief read one byte from the I2C device - - Implemented as a macro, which calls either i2c_readAck or i2c_readNak - - @param ack 1 send ack, request more data from device
- 0 send nak, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_read(unsigned char ack); -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - - -/**@}*/ -#endif diff --git a/keyboards/ergodox80/ergodox80/matrix.c b/keyboards/ergodox80/ergodox80/matrix.c deleted file mode 100644 index c352924b5..000000000 --- a/keyboards/ergodox80/ergodox80/matrix.c +++ /dev/null @@ -1,382 +0,0 @@ -/* - -Note for ErgoDox EZ customizers: Here be dragons! -This is not a file you want to be messing with. -All of the interesting stuff for you is under keymaps/ :) -Love, Erez - -Copyright 2013 Oleg Kostyuk - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include "wait.h" -#include "action_layer.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "ergodox80.h" -#include "i2cmaster.h" -#ifdef DEBUG_MATRIX_SCAN_RATE -#include "timer.h" -#endif - -/* - * This constant define not debouncing time in msecs, but amount of matrix - * scan loops which should be made to get stable debounced results. - * - * On Ergodox matrix scan rate is relatively low, because of slow I2C. - * Now it's only 317 scans/second, or about 3.15 msec/scan. - * According to Cherry specs, debouncing time is 5 msec. - * - * And so, there is no sense to have DEBOUNCE higher than 2. - */ - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(uint8_t row); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -static uint8_t mcp23018_reset_loop; - -#ifdef DEBUG_MATRIX_SCAN_RATE -uint32_t matrix_timer; -uint32_t matrix_scan_count; -#endif - - -__attribute__ ((weak)) -void matrix_init_user(void) {} - -__attribute__ ((weak)) -void matrix_scan_user(void) {} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // initialize row and col - - mcp23018_status = init_mcp23018(); - - - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - -#ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; -#endif - - matrix_init_kb(); - -} - -void matrix_power_up(void) { - mcp23018_status = init_mcp23018(); - - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - -#ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; -#endif - -} - -uint8_t matrix_scan(void) -{ - if (mcp23018_status) { // if there was an error - if (++mcp23018_reset_loop == 0) { - // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans - // this will be approx bit more frequent than once per second - print("trying to reset mcp23018\n"); - mcp23018_status = init_mcp23018(); - if (mcp23018_status) { - print("left side not responding\n"); - } else { - print("left side attached\n"); - ergodox_blink_all_leds(); - } - } - } - -#ifdef DEBUG_MATRIX_SCAN_RATE - matrix_scan_count++; - - uint32_t timer_now = timer_read32(); - if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { - print("matrix scan frequency: "); - pdec(matrix_scan_count); - print("\n"); - - matrix_timer = timer_now; - matrix_scan_count = 0; - } -#endif - - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(i); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_us(1); - // this should be wait_ms(1) but has been left as-is at EZ's request - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< http://jump.to/fleury -* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device with hardware TWI -* Usage: API compatible with I2C Software Library i2cmaster.h -**************************************************************************/ -#include -#include - -#include - - -/* define CPU frequency in Mhz here if not defined in Makefile */ -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -/* I2C clock in Hz */ -#define SCL_CLOCK 400000L - - -/************************************************************************* - Initialization of the I2C bus interface. Need to be called only once -*************************************************************************/ -void i2c_init(void) -{ - /* initialize TWI clock - * minimal values in Bit Rate Register (TWBR) and minimal Prescaler - * bits in the TWI Status Register should give us maximal possible - * I2C bus speed - about 444 kHz - * - * for more details, see 20.5.2 in ATmega16/32 secification - */ - - TWSR = 0; /* no prescaler */ - TWBR = 10; /* must be >= 10 for stable operation */ - -}/* i2c_init */ - - -/************************************************************************* - Issues a start condition and sends address and transfer direction. - return 0 = device accessible, 1= failed to access device -*************************************************************************/ -unsigned char i2c_start(unsigned char address) -{ - uint8_t twst; - - // send START condition - TWCR = (1<= 0: - if section['name'] == 'layout_config': - config.update(loads("\n".join( - section['code_lines'] - ))) - elif section['sub_name'].startswith('layer'): - layer_name = section['sub_name'] - config['layer_lines'][layer_name] = section['code_lines'] - - reset_section() - - def amend_section(line_index, line): - section['end_line'] = line_index - section['code_lines'].append(line) - - config = DEFAULT_CONFIG.copy() - config.update({ - 'layer_lines': collections.OrderedDict(), - 'macro_ids': {'UM'}, - 'unicode_macros': {}, - }) - - section = {} - reset_section() - - with io.open(path, encoding="utf-8") as fh: - for i, line in enumerate(fh): - if line.startswith("#"): - start_section(i, line) - elif line.startswith(" "): - amend_section(i, line[4:]) - else: - # TODO: maybe parse description - pass - - end_section() - assert 'layout' in config - return config - -# header file parsing - -IF0_RE = re.compile(r""" - ^ - #if 0 - $.*? - #endif -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -COMMENT_RE = re.compile(r""" - /\* - .*? - \*/" -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -def read_header_file(path): - with io.open(path, encoding="utf-8") as fh: - data = fh.read() - data, _ = COMMENT_RE.subn("", data) - data, _ = IF0_RE.subn("", data) - return data - - -def regex_partial(re_str_fmt, flags): - def partial(*args, **kwargs): - re_str = re_str_fmt.format(*args, **kwargs) - return re.compile(re_str, flags) - return partial - - -KEYDEF_REP = regex_partial(r""" - #define - \s - ( - (?:{}) # the prefixes - (?:\w+) # the key name - ) # capture group end -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -ENUM_RE = re.compile(r""" - ( - enum - \s\w+\s - \{ - .*? # the enum content - \} - ; - ) # capture group end -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -ENUM_KEY_REP = regex_partial(r""" - ( - {} # the prefixes - \w+ # the key name - ) # capture group end -""", re.MULTILINE | re.DOTALL | re.VERBOSE) - - -def parse_keydefs(config, data): - prefix_options = "|".join(config['key_prefixes']) - keydef_re = KEYDEF_REP(prefix_options) - enum_key_re = ENUM_KEY_REP(prefix_options) - for match in keydef_re.finditer(data): - yield match.groups()[0] - - for enum_match in ENUM_RE.finditer(data): - enum = enum_match.groups()[0] - for key_match in enum_key_re.finditer(enum): - yield key_match.groups()[0] - - -def parse_valid_keys(config, out_path): - basepath = os.path.abspath(os.path.join(os.path.dirname(out_path))) - dirpaths = [] - subpaths = [] - while len(subpaths) < 6: - path = os.path.join(basepath, *subpaths) - dirpaths.append(path) - dirpaths.append(os.path.join(path, "tmk_core", "common")) - dirpaths.append(os.path.join(path, "quantum")) - subpaths.append('..') - - includes = set(config['keymaps_includes']) - includes.add("keycode.h") - - valid_keycodes = set() - for dirpath, include in it.product(dirpaths, includes): - include_path = os.path.join(dirpath, include) - if os.path.exists(include_path): - header_data = read_header_file(include_path) - valid_keycodes.update( - parse_keydefs(config, header_data) - ) - return valid_keycodes - - -# Keymap Parsing - -def iter_raw_codes(layer_lines, filler, separator): - filler_re = re.compile("[" + filler + " ]") - for line in layer_lines: - line, _ = filler_re.subn("", line.strip()) - if not line: - continue - codes = line.split(separator) - for code in codes[1:-1]: - yield code - - -def iter_indexed_codes(raw_codes, key_indexes): - key_rows = {} - key_indexes_flat = [] - - for row_index, key_indexes in enumerate(key_indexes): - for key_index in key_indexes: - key_rows[key_index] = row_index - key_indexes_flat.extend(key_indexes) - assert len(raw_codes) == len(key_indexes_flat) - for raw_code, key_index in zip(raw_codes, key_indexes_flat): - # we keep track of the row mostly for layout purposes - yield raw_code, key_index, key_rows[key_index] - - -LAYER_CHANGE_RE = re.compile(r""" - (DF|TG|MO)\(\d+\) -""", re.VERBOSE) - - -MACRO_RE = re.compile(r""" - M\(\w+\) -""", re.VERBOSE) - - -UNICODE_RE = re.compile(r""" - U[0-9A-F]{4} -""", re.VERBOSE) - - -NON_CODE = re.compile(r""" - ^[^A-Z0-9_]$ -""", re.VERBOSE) - - -def parse_uni_code(raw_code): - macro_id = "UC_" + ( - unicodedata.name(raw_code) - .replace(" ", "_") - .replace("-", "_") - ) - code = "M({})".format(macro_id) - uc_hex = "{:04X}".format(ord(raw_code)) - return code, macro_id, uc_hex - - -def parse_key_code(raw_code, key_prefixes, valid_keycodes): - if raw_code in valid_keycodes: - return raw_code - - for prefix in key_prefixes: - code = prefix + raw_code - if code in valid_keycodes: - return code - - -def parse_code(raw_code, key_prefixes, valid_keycodes): - if not raw_code: - return 'KC_TRNS', None, None - - if LAYER_CHANGE_RE.match(raw_code): - return raw_code, None, None - - if MACRO_RE.match(raw_code): - macro_id = raw_code[2:-1] - return raw_code, macro_id, None - - if UNICODE_RE.match(raw_code): - hex_code = raw_code[1:] - return parse_uni_code(chr(int(hex_code, 16))) - - if NON_CODE.match(raw_code): - return parse_uni_code(raw_code) - - code = parse_key_code(raw_code, key_prefixes, valid_keycodes) - return code, None, None - - -def parse_keymap(config, key_indexes, layer_lines, valid_keycodes): - keymap = {} - raw_codes = list(iter_raw_codes( - layer_lines, config['filler'], config['separator'] - )) - indexed_codes = iter_indexed_codes(raw_codes, key_indexes) - key_prefixes = config['key_prefixes'] - for raw_code, key_index, row_index in indexed_codes: - code, macro_id, uc_hex = parse_code( - raw_code, key_prefixes, valid_keycodes - ) - # TODO: line numbers for invalid codes - err_msg = "Could not parse key '{}' on row {}".format( - raw_code, row_index - ) - assert code is not None, err_msg - # print(repr(raw_code), repr(code), macro_id, uc_hex) - if macro_id: - config['macro_ids'].add(macro_id) - if uc_hex: - config['unicode_macros'][macro_id] = uc_hex - keymap[key_index] = (code, row_index) - return keymap - - -def parse_keymaps(config, valid_keycodes): - keymaps = collections.OrderedDict() - key_indexes = config.get( - 'key_indexes', KEYBOARD_LAYOUTS[config['layout']] - ) - # TODO: maybe validate key_indexes - - for layer_name, layer_lines, in config['layer_lines'].items(): - keymaps[layer_name] = parse_keymap( - config, key_indexes, layer_lines, valid_keycodes - ) - return keymaps - -# keymap.c output - -USERCODE = """ -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - case L1: - ergodox_right_led_1_on(); - break; - case L2: - ergodox_right_led_2_on(); - break; - case L3: - ergodox_right_led_3_on(); - break; - case L4: - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - break; - case L5: - ergodox_right_led_1_on(); - ergodox_right_led_3_on(); - break; - // case L6: - // ergodox_right_led_2_on(); - // ergodox_right_led_3_on(); - // break; - // case L7: - // ergodox_right_led_1_on(); - // ergodox_right_led_2_on(); - // ergodox_right_led_3_on(); - // break; - default: - ergodox_board_led_off(); - break; - } -}; -""" - -MACROCODE = """ -#define UC_MODE_WIN 0 -#define UC_MODE_LINUX 1 -#define UC_MODE_OSX 2 - -// TODO: allow default mode to be configured -static uint16_t unicode_mode = UC_MODE_WIN; - -uint16_t hextokeycode(uint8_t hex) {{ - if (hex == 0x0) {{ - return KC_P0; - }} - if (hex < 0xA) {{ - return KC_P1 + (hex - 0x1); - }} - return KC_A + (hex - 0xA); -}} - -void unicode_action_function(uint16_t hi, uint16_t lo) {{ - switch (unicode_mode) {{ - case UC_MODE_WIN: - register_code(KC_LALT); - - register_code(KC_PPLS); - unregister_code(KC_PPLS); - - register_code(hextokeycode((hi & 0xF0) >> 4)); - unregister_code(hextokeycode((hi & 0xF0) >> 4)); - register_code(hextokeycode((hi & 0x0F))); - unregister_code(hextokeycode((hi & 0x0F))); - register_code(hextokeycode((lo & 0xF0) >> 4)); - unregister_code(hextokeycode((lo & 0xF0) >> 4)); - register_code(hextokeycode((lo & 0x0F))); - unregister_code(hextokeycode((lo & 0x0F))); - - unregister_code(KC_LALT); - break; - case UC_MODE_LINUX: - register_code(KC_LCTL); - register_code(KC_LSFT); - - register_code(KC_U); - unregister_code(KC_U); - - register_code(hextokeycode((hi & 0xF0) >> 4)); - unregister_code(hextokeycode((hi & 0xF0) >> 4)); - register_code(hextokeycode((hi & 0x0F))); - unregister_code(hextokeycode((hi & 0x0F))); - register_code(hextokeycode((lo & 0xF0) >> 4)); - unregister_code(hextokeycode((lo & 0xF0) >> 4)); - register_code(hextokeycode((lo & 0x0F))); - unregister_code(hextokeycode((lo & 0x0F))); - - unregister_code(KC_LCTL); - unregister_code(KC_LSFT); - break; - case UC_MODE_OSX: - break; - }} -}} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {{ - if (!record->event.pressed) {{ - return MACRO_NONE; - }} - // MACRODOWN only works in this function - switch(id) {{ - case UM: - unicode_mode = (unicode_mode + 1) % 2; - break; -{macro_cases} -{unicode_macro_cases} - default: - break; - }} - return MACRO_NONE; -}}; -""" - - -UNICODE_MACRO_TEMPLATE = """ -case {macro_id}: - unicode_action_function(0x{hi:02x}, 0x{lo:02x}); - break; -""".strip() - - -def unicode_macro_cases(config): - for macro_id, uc_hex in config['unicode_macros'].items(): - hi = int(uc_hex, 16) >> 8 - lo = int(uc_hex, 16) & 0xFF - unimacro_keys = ", ".join( - "T({})".format( - "KP_" + digit if digit.isdigit() else digit - ) for digit in uc_hex - ) - yield UNICODE_MACRO_TEMPLATE.format( - macro_id=macro_id, hi=hi, lo=lo - ) - - -def iter_keymap_lines(keymap, row_indents=None): - col_widths = {} - col = 0 - # first pass, figure out the column widths - prev_row_index = None - for code, row_index in keymap.values(): - if row_index != prev_row_index: - col = 0 - if row_indents: - col = row_indents[row_index] - col_widths[col] = max(len(code), col_widths.get(col, 0)) - prev_row_index = row_index - col += 1 - - # second pass, yield the cell values - col = 0 - prev_row_index = None - for key_index in sorted(keymap): - code, row_index = keymap[key_index] - if row_index != prev_row_index: - col = 0 - yield "\n" - if row_indents: - for indent_col in range(row_indents[row_index]): - pad = " " * (col_widths[indent_col] - 4) - yield (" /*-*/" + pad) - col = row_indents[row_index] - else: - yield pad - yield " {}".format(code) - if key_index < len(keymap) - 1: - yield "," - # This will be yielded on the next iteration when - # we know that we're not at the end of a line. - pad = " " * (col_widths[col] - len(code)) - prev_row_index = row_index - col += 1 - - -def iter_keymap_parts(config, keymaps): - # includes - for include_path in config['keymaps_includes']: - yield '#include "{}"\n'.format(include_path) - - yield "\n" - - # definitions - for i, macro_id in enumerate(sorted(config['macro_ids'])): - yield "#define {} {}\n".format(macro_id, i) - - yield "\n" - - for i, layer_name in enumerate(config['layer_lines']): - yield '#define L{0:<3} {0:<5} // {1}\n'.format(i, layer_name) - - yield "\n" - - # keymaps - yield "const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\n" - - for i, layer_name in enumerate(config['layer_lines']): - # comment - layer_lines = config['layer_lines'][layer_name] - prefixed_lines = " * " + " * ".join(layer_lines) - yield "/*\n{} */\n".format(prefixed_lines) - - # keymap codes - keymap = keymaps[layer_name] - row_indents = ROW_INDENTS.get(config['layout']) - keymap_lines = "".join(iter_keymap_lines(keymap, row_indents)) - yield "[L{0}] = KEYMAP({1}\n),\n".format(i, keymap_lines) - - yield "};\n\n" - - # no idea what this is for - yield "const uint16_t PROGMEM fn_actions[] = {};\n" - - # macros - yield MACROCODE.format( - macro_cases="", - unicode_macro_cases="\n".join(unicode_macro_cases(config)), - ) - - # TODO: dynamically create blinking lights - yield USERCODE - - -def main(argv=sys.argv[1:]): - if not argv or '-h' in argv or '--help' in argv: - print(__doc__) - return 0 - - in_path = os.path.abspath(argv[0]) - if not os.path.exists(in_path): - print("No such file '{}'".format(in_path)) - return 1 - - if len(argv) > 1: - out_path = os.path.abspath(argv[1]) - else: - dirname = os.path.dirname(in_path) - out_path = os.path.join(dirname, "keymap.c") - - config = parse_config(in_path) - valid_keys = parse_valid_keys(config, out_path) - keymaps = parse_keymaps(config, valid_keys) - - with io.open(out_path, mode="w", encoding="utf-8") as fh: - for part in iter_keymap_parts(config, keymaps): - fh.write(part) - - -if __name__ == '__main__': - sys.exit(main()) diff --git a/keyboards/ergodox80/ergodox80/util/readme.md b/keyboards/ergodox80/ergodox80/util/readme.md deleted file mode 100644 index 26c5e5d99..000000000 --- a/keyboards/ergodox80/ergodox80/util/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ErgoDox EZ Utilities - -The Python script in this directory, by [mbarkhau](https://github.com/mbarkhau) allows you to write out a basic ErgoDox EZ keymap using Markdown notation, and then transpile it to C, which you can then compile. It's experimental, but if you're not comfortable using C, it's a nice option. diff --git a/keyboards/ergodox80/keymaps/default/keymap.c b/keyboards/ergodox80/keymaps/default/keymap.c deleted file mode 100644 index 2da2c5b0e..000000000 --- a/keyboards/ergodox80/keymaps/default/keymap.c +++ /dev/null @@ -1,183 +0,0 @@ -#include "ergodox80.h" -#include "debug.h" -#include "action_layer.h" -#include "version.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | 1 | 2 | Home | | PgUp | 3 | 4 | - * |------|------|------| |------|--------|------| - * | Space| BkSp | End | | PgDn | Tab |Enter | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP( // layer 0 : default - // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_1, KC_2, KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP,KC_3, KC_4, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * |------|------|------| |------|------|------| - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP( - // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+----------. - * | | | | | | | | - * |------|------|------| |------|------|----------| - * | | | | | | |BrwserBack| - * `--------------------' `------------------------' - */ -// MEDIA AND MOUSE -[MDIA] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; diff --git a/keyboards/ergodox80/readme.md b/keyboards/ergodox80/readme.md deleted file mode 100644 index b5c09f922..000000000 --- a/keyboards/ergodox80/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Ergodox 80 key support - -This is based on the ergodox-ez qmk firmware but is for ergodoxes with 80 keys. - - - diff --git a/keyboards/ergodox80/rules.mk b/keyboards/ergodox80/rules.mk deleted file mode 100644 index ac63d4eff..000000000 --- a/keyboards/ergodox80/rules.mk +++ /dev/null @@ -1,28 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= yes # Unicode -- cgit v1.2.3 From e5396ca9e5ccb714a757b6559c9f7e95bf372e3f Mon Sep 17 00:00:00 2001 From: Nathan Sharfi Date: Wed, 7 Sep 2016 18:23:01 -0700 Subject: zweihander: rename to Makefile --- keyboards/ergodox/keymaps/zweihander-osx/Makefile | 2 ++ keyboards/ergodox/keymaps/zweihander-osx/makefile.mk | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) create mode 100644 keyboards/ergodox/keymaps/zweihander-osx/Makefile delete mode 100644 keyboards/ergodox/keymaps/zweihander-osx/makefile.mk (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/zweihander-osx/Makefile b/keyboards/ergodox/keymaps/zweihander-osx/Makefile new file mode 100644 index 000000000..6e3d088a4 --- /dev/null +++ b/keyboards/ergodox/keymaps/zweihander-osx/Makefile @@ -0,0 +1,2 @@ +# Don’t do a tricolor wave when the computer is shut down in Windows +SLEEP_LED_ENABLE = no diff --git a/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk b/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk deleted file mode 100644 index 6e3d088a4..000000000 --- a/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk +++ /dev/null @@ -1,2 +0,0 @@ -# Don’t do a tricolor wave when the computer is shut down in Windows -SLEEP_LED_ENABLE = no -- cgit v1.2.3 From 273a6cc688ef4c8f7964d8c62147c8697db42cde Mon Sep 17 00:00:00 2001 From: Nathan Sharfi Date: Wed, 7 Sep 2016 20:28:31 -0700 Subject: - Make thumb-accessible ⌥ and ⌃ into right-⌥ and right-⌃ - remove media-space and media-shift-space; put a play/pause key at media-m instead - add print screen, scroll lock, and pause/break to the media layer And in the readme: - don't say we don't have any Windows-specific keys - add mnemonics for thumb-alt and thumb-ctrl positioning --- keyboards/ergodox/keymaps/zweihander-osx/keymap.c | 14 +++++++------- keyboards/ergodox/keymaps/zweihander-osx/readme.markdown | 8 +++++--- 2 files changed, 12 insertions(+), 10 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c index d6d66fd55..725a73e34 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c +++ b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,------|------|------| |------+--------+------. * | | | PgUp | | PgDn | | | * | | ⇥ |------| |------| ⇥ |Enter | - * | | | L⌥ | | L⌃ | | | + * | | | R⌥ | | R⌃ | | | * `--------------------' `----------------------' */ // If it accepts an argument (i.e, is a function), it doesn't need KC_. @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI,KC_LEFT,KC_RGHT, KC_GRV, KC_QUOT, KC_PGUP, - KC_SPC,KC_TAB ,KC_LALT, + KC_SPC,KC_TAB ,KC_RALT, // right hand TG(SYMB), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, MO(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, @@ -55,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_SPC , KC_ESC, KC_BSPC, KC_PGDN, - KC_LCTL, KC_TAB, KC_ENT + KC_RCTL, KC_TAB, KC_ENT ), /* Keymap 1: Symbol Layer * @@ -102,13 +102,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 2: Media keys * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F14 | F15 | | | | | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | + * | | F14 | F15 |PrtScr|SclLck| Pause| | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | PgUp |⌘S⌘⇥⌘R| Term | | | | ⌘] | ⌥⌘↑ | ↑ | ⌥⌘↓ | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | |Safari| PgDn | | |------| |------| ⌘[ | ← | ↓ | → | | ⏯ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | |BBEdit| | | |L⇧+Spc| Spc | ⏮ | ⏭ | | | + * | | | | | |BBEdit| | | | | ⏯ | ⏮ | ⏭ | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * | | | | | | |VolUp |VolDn | Mute | | | * `----------------------------------' `----------------------------------' @@ -122,7 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ // MEDIA AND MOUSE [MDIA] = KEYMAP( - KC_TRNS, KC_F14 , KC_F15 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, /* F14 dims screen, F15 brightens */ + KC_TRNS, KC_F14 , KC_F15 , KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, /* F14 dims screen, F15 brightens */ KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, M(SGWF), M(TMNL), KC_TRNS, KC_TRNS, KC_TRNS, M(SAFA), KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(BBED), KC_TRNS, @@ -134,7 +134,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LGUI(KC_Q), LGUI(KC_W), LGUI(LSFT(KC_GRV)), LGUI(KC_GRV), KC_TRNS, KC_TRNS, KC_PWR , KC_TRNS, LGUI(KC_RBRC), LGUI(LALT(KC_UP)), KC_UP , LGUI(LALT(KC_DOWN)), KC_TRNS, KC_TRNS, LGUI(KC_LBRC), KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_MPLY, - KC_TRNS, LSFT(KC_SPC), KC_SPC , KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END , diff --git a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown index 3b7f52941..5125a12ee 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown +++ b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown @@ -7,7 +7,7 @@ This layout is tuned for people who… ## use OS X -This layout doesn’t make any concessions for Windows use. While it should work fine in Windows, I’m not about to devote precious keyboard space to Windows-specific shortcuts. +While this layout should work fine in Windows, it’s not tuned for it. No sane person who primarily uses Windows would put this many Windows keys on a keyboard layout. ## mouse left-handed while doing other things with the right hand @@ -21,8 +21,6 @@ I tend to have my mouse in my left hand, but I like to use my other hand to make - Go Up and Close Just-Left Folder (⌥⌘↑) - Cycle through open windows in current application (⌘\` and ⌘⇧\`) - Cycle through tabs in current window (⌥⇥ and ⌥⇧⇥) -- Space (page down in browsers; Quick Look in the Finder) -- Shift-Space (page up in web browsers) Because moving letter-by-letter is way slower than moving word-by-word, I added Option (⌥) to the bottommost button on the left side. This key can be held easily while holding ; (activate media layer) and pressing J and L to move left and right by word. @@ -34,11 +32,15 @@ I wanted to preserve the feel of a number of shortcuts that involve pressing lot - Empty Trash Without Asking for Confirmation (⇧⌥⌘⌫) - Shut Down Without Asking for Confirmation (⇧⌥⌘ power) +⇧⌥⌘⌫, when you press the backspace on the right half of the keyboard, is much more satisfying than if you curl your left hand into a claw to press all the keys on the left. Try both; you’ll agree. + ## use Emacs-style shortcuts I press C-a, C-e, and C-k all the time. It’s difficult to press these key combinations with the control key on the bottom left and I’m too quick on the draw for the control function on the / key to work reliably, so the bottommost thumb button on the right side is another control key. +Having trouble remembering which thumb key is alt and which is ctrl? It’s like on the lower right of a normal keyboard — leftmost is alt, rightmost is ctrl. + ## use spreadsheets -- cgit v1.2.3 From 740b4bbe463545c3547c41def88fa30abbc734fc Mon Sep 17 00:00:00 2001 From: Roman Zolotarev Date: Thu, 8 Sep 2016 21:12:34 +0800 Subject: Fix typo --- keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md index a86061285..4fa1814fb 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -20,7 +20,7 @@ It is `CTL_T(KC_ESC)` and it works this way: ## How to activate N-rollover -- Hold left `SHIFT` and right `SHIRT` and then tap `N`. +- Hold left `SHIFT` and right `SHIFT` and then tap `N`. ## How to make and flash on OS X -- cgit v1.2.3 From b83f76e1b070236344837cc6838852daa08e6436 Mon Sep 17 00:00:00 2001 From: profet23 Date: Thu, 8 Sep 2016 23:34:55 -0400 Subject: Changing keymap name to "profet_80" --- .../ergodox/ez/keymaps/default_80/ergodox80.png | Bin 20663 -> 0 bytes keyboards/ergodox/ez/keymaps/default_80/keymap.c | 183 --------------------- keyboards/ergodox/ez/keymaps/default_80/readme.md | 10 -- .../ergodox/ez/keymaps/profet_80/ergodox80.png | Bin 0 -> 20663 bytes keyboards/ergodox/ez/keymaps/profet_80/keymap.c | 183 +++++++++++++++++++++ keyboards/ergodox/ez/keymaps/profet_80/readme.md | 10 ++ 6 files changed, 193 insertions(+), 193 deletions(-) delete mode 100644 keyboards/ergodox/ez/keymaps/default_80/ergodox80.png delete mode 100644 keyboards/ergodox/ez/keymaps/default_80/keymap.c delete mode 100644 keyboards/ergodox/ez/keymaps/default_80/readme.md create mode 100644 keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png create mode 100644 keyboards/ergodox/ez/keymaps/profet_80/keymap.c create mode 100644 keyboards/ergodox/ez/keymaps/profet_80/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png deleted file mode 100644 index 66b9752eb..000000000 Binary files a/keyboards/ergodox/ez/keymaps/default_80/ergodox80.png and /dev/null differ diff --git a/keyboards/ergodox/ez/keymaps/default_80/keymap.c b/keyboards/ergodox/ez/keymaps/default_80/keymap.c deleted file mode 100644 index 505ff2972..000000000 --- a/keyboards/ergodox/ez/keymaps/default_80/keymap.c +++ /dev/null @@ -1,183 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" -#include "version.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | 1 | 2 | Home | | PgUp | 3 | 4 | - * |------|------|------| |------|--------|------| - * | Space| BkSp | End | | PgDn | Tab |Enter | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP_80( // layer 0 : default - // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_1, KC_2, KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP,KC_3, KC_4, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * |------|------|------| |------|------|------| - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP_80( - // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+----------. - * | | | | | | | | - * |------|------|------| |------|------|----------| - * | | | | | | |BrwserBack| - * `--------------------' `------------------------' - */ -// MEDIA AND MOUSE -[MDIA] = KEYMAP_80( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; diff --git a/keyboards/ergodox/ez/keymaps/default_80/readme.md b/keyboards/ergodox/ez/keymaps/default_80/readme.md deleted file mode 100644 index b6bbb86d2..000000000 --- a/keyboards/ergodox/ez/keymaps/default_80/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# ErgoDox 80 Default Configuration - -This is based on the default Ergodox EZ keymap. -The difference is that this keymap supports 80 key layouts. -If you own an 80 key Ergodox, use this as an example to get your desired keymap. - -**NOTE:** This layout is not physically supported by the Ergodox EZ. - - -![Default80](ergodox80.png) diff --git a/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png new file mode 100644 index 000000000..66b9752eb Binary files /dev/null and b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png differ diff --git a/keyboards/ergodox/ez/keymaps/profet_80/keymap.c b/keyboards/ergodox/ez/keymaps/profet_80/keymap.c new file mode 100644 index 000000000..505ff2972 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | 1 | 2 | Home | | PgUp | 3 | 4 | + * |------|------|------| |------|--------|------| + * | Space| BkSp | End | | PgDn | Tab |Enter | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP_80( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_1, KC_2, KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP,KC_3, KC_4, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * |------|------|------| |------|------|------| + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP_80( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+----------. + * | | | | | | | | + * |------|------|------| |------|------|----------| + * | | | | | | |BrwserBack| + * `--------------------' `------------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP_80( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/profet_80/readme.md b/keyboards/ergodox/ez/keymaps/profet_80/readme.md new file mode 100644 index 000000000..b6bbb86d2 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/readme.md @@ -0,0 +1,10 @@ +# ErgoDox 80 Default Configuration + +This is based on the default Ergodox EZ keymap. +The difference is that this keymap supports 80 key layouts. +If you own an 80 key Ergodox, use this as an example to get your desired keymap. + +**NOTE:** This layout is not physically supported by the Ergodox EZ. + + +![Default80](ergodox80.png) -- cgit v1.2.3 From 9c2015ea7f23a69c1c585b1b366df5cbfd3e93c7 Mon Sep 17 00:00:00 2001 From: Lars Date: Thu, 8 Sep 2016 23:20:17 -0500 Subject: first commit of Absenth's Ergodox Firmware --- .../ergodox/keymaps/absenth/absenth_highres.png | Bin 0 -> 1463041 bytes keyboards/ergodox/keymaps/absenth/keymap.c | 183 +++++++++++++++++++++ keyboards/ergodox/keymaps/absenth/readme.md | 8 + 3 files changed, 191 insertions(+) create mode 100644 keyboards/ergodox/keymaps/absenth/absenth_highres.png create mode 100644 keyboards/ergodox/keymaps/absenth/keymap.c create mode 100644 keyboards/ergodox/keymaps/absenth/readme.md (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png new file mode 100644 index 000000000..c07aa8803 Binary files /dev/null and b/keyboards/ergodox/keymaps/absenth/absenth_highres.png differ diff --git a/keyboards/ergodox/keymaps/absenth/keymap.c b/keyboards/ergodox/keymaps/absenth/keymap.c new file mode 100644 index 000000000..30f747419 --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/absenth/readme.md b/keyboards/ergodox/keymaps/absenth/readme.md new file mode 100644 index 000000000..35d0aad46 --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/readme.md @@ -0,0 +1,8 @@ +# ErgoDox EZ Absenth Configuration + +## Changelog + +* Sept. 8, 2016 (V0.1): + * Made A key double as MEDIA Layer change when you hold it. Added mouse buttons to the large thumb buttons on the left side on the Media Layer. Added vi/vim style arrow keys on HJKL on media layer. + +![Absenth](absenth_highres.png) -- cgit v1.2.3 From 52121cee7a9b26a6450db33ec34c8e4c8895aafc Mon Sep 17 00:00:00 2001 From: Lars Date: Thu, 8 Sep 2016 23:32:11 -0500 Subject: Updated Image Header --- .../ergodox/keymaps/absenth/absenth_highres.png | Bin 1463041 -> 1429453 bytes 1 file changed, 0 insertions(+), 0 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png index c07aa8803..a0596b281 100644 Binary files a/keyboards/ergodox/keymaps/absenth/absenth_highres.png and b/keyboards/ergodox/keymaps/absenth/absenth_highres.png differ -- cgit v1.2.3 From 1aeb59335f2fe67613df25308a630ca453975ac0 Mon Sep 17 00:00:00 2001 From: Didier Loiseau Date: Sun, 11 Sep 2016 02:19:55 +0200 Subject: Fixed compilation issues after the merge --- keyboard/ergodox_ez/keymaps/bepo/keymap.c | 527 --------------------- keyboards/ergodox/keymaps/bepo_csa/keymap.c | 527 +++++++++++++++++++++ .../keymap_extras/keymap_canadian_multilingual.h | 2 +- 3 files changed, 528 insertions(+), 528 deletions(-) delete mode 100644 keyboard/ergodox_ez/keymaps/bepo/keymap.c create mode 100644 keyboards/ergodox/keymaps/bepo_csa/keymap.c (limited to 'keyboards/ergodox') diff --git a/keyboard/ergodox_ez/keymaps/bepo/keymap.c b/keyboard/ergodox_ez/keymaps/bepo/keymap.c deleted file mode 100644 index 7097d641d..000000000 --- a/keyboard/ergodox_ez/keymaps/bepo/keymap.c +++ /dev/null @@ -1,527 +0,0 @@ -/* TypeMatrix-2030-like keymap */ -#include "ergodox_ez.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" -#include "led.h" -#include "keymap_extras/keymap_bepo.h" -#include "keymap_extras/keymap_canadian_multilingual.h" - -enum layers { - LR_BASE, // default layer - LR_CSA, // BÉPO over Canadian Multilingual (CSA) - LR_CSA_SFT, // shifted BÉPO over CSA - LR_CSA_AGR, // altgr-ed BÉPO over CSA - LR_CSA_AGR_SFT, // altgr-shifted BÉPO over CSA - LR_NUMR, // numeric layer - LR_FN, // fn layer -}; - -#define IS_CA_MULT_ENABLED() (layer_state & (1 << LR_CSA)) - -enum macros { - // Characters that do not exist in CSA and must be implemented based on unicode support - // Note: these are intentionally declared first to be used as indexes in spec_chars below - UC_NDSH, // – - UC_MDSH, // — - UC_ELPS, // … - END_UC, // indicates the last unicode character macro - // other macros - M_CSA_SFT, // toggle shift on CSA - M_CSA_AGR_SFT, // toggle shift on LR_CSA_AGR (goes to LR_CSA_AGR_SFT) - M_CSA_SFT_AGR, // toggle AltGr on LR_CSA_SFT (goes to LR_CSA_AGR_SFT) - // macros for characters that need to be un-shifted in LR_CA_MULT_SHIFT - M_1, - M_2, - M_3, - M_4, - M_5, - M_6, - M_7, - M_8, - M_9, - M_0, - M_DEGR, - M_SCLN, - M_GRV, - M_NBSP, - // macros for characters that don't have a simple key combination in LR_CA_MULT_ALTGR - M_CRC, - // other layer macros - M_DBL0, // double 0 - M_FNLR, // fn layer - M_NMAL, // num+alt -}; - -#define CSA(name) M(M_CSA_##name) // calls a CSA macro - -const uint16_t unicode_chars[] = { - [UC_NDSH] = L'–', - [UC_MDSH] = L'—', - [UC_ELPS] = L'…', -}; - -/* shortcut for unicode character macros */ -#define MUC(name) M(UC_##name) // calls a unicode macro - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | $ | " | « | » | ( | ) | Del | | Del | @ | + | - | / | * | W | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | B | É | P | O | È |Backsp| |Backsp| ^ | V | D | L | J | Z | - * |--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| - * | = | A | U | I | E | , |------| |------| C | T | S | R | N | M | - * |--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| - * | LShift | À | Y | X | . | K | | | | ' | Q | G | H | F | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |LCtrl | fn | LGui |numAlt| LAlt | |Alt Gr| % | App | Ç | RCtrl| - * `----------------------------------' `----------------------------------' - * ,--------------. ,-------------. - * | Esc | num | | Left |Right | - * ,------+-------+------| |------+------+------. - * | | | PgUp | | Up | | | - * |Space | Home |------| |------| End |Space | - * | | | PgDn | | Down | | | - * `---------------------' `--------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[LR_BASE] = KEYMAP( // layer 0 : default - // left hand - BP_DLR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, - KC_TAB, BP_B, BP_ECUT, BP_P, BP_O, BP_EGRV, KC_BSPC, - BP_EQL, BP_A, BP_U, BP_I, BP_E, BP_COMM, - KC_LSFT, BP_AGRV, BP_Y, BP_X, BP_DOT, BP_K, KC_ENT, - KC_LCTL, M(M_FNLR), KC_LGUI, M(M_NMAL), KC_LALT, - - KC_ESC, TG(LR_NUMR), - KC_PGUP, - KC_SPC, KC_HOME, KC_PGDN, - - // right hand - KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, BP_W, - KC_BSPC, BP_DCRC, BP_V, BP_D, BP_L, BP_J, BP_Z, - BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, - KC_ENT, BP_APOS, BP_Q, BP_G, BP_H, BP_F, KC_RSFT, - BP_ALGR, BP_PERC, KC_APP, BP_CCED, KC_RCTL, - - KC_LEFT, KC_RGHT, - KC_UP, - KC_DOWN, KC_END, KC_SPC - ), -/** - * Same as default but for use with Canadian Multilingual on OS side - */ -[LR_CSA] = KEYMAP( - // left hand - KC_DLR, CSA_DQOT, CSA_LGIL, CSA_RGIL, KC_LPRN, KC_RPRN, KC_TRNS, - KC_TRNS, KC_B, CSA_ECUT, KC_P, KC_O, CSA_EGRV, KC_TRNS, - KC_EQL, KC_A, KC_U, KC_I, KC_E, KC_COMM, - CSA(SFT), CSA_AGRV, KC_Y, KC_X, KC_DOT, KC_K, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - - // right hand - KC_TRNS, KC_AT, KC_PLUS, KC_MINS, CSA_SLSH, KC_ASTR, KC_W, - KC_TRNS, CSA_DCRC, KC_V, KC_D, KC_L, KC_J, KC_Z, - KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, - KC_TRNS, CSA_APOS, KC_Q, KC_G, KC_H, KC_F, CSA(SFT), - MO(LR_CSA_AGR), KC_PERC, KC_TRNS, CSA_CCED, KC_LCTL, // RCTL has a special behaviour in CSA so use LCTL - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS - ), -/* Shifted BÉPO over Canadian Multilingual - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | # | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | ! | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | ° | | | | | ; |------| |------| | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | : | | | | | ? | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | ` | | | | - * `----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[LR_CSA_SFT] = KEYMAP( - // left hand - KC_HASH, M(M_1), M(M_2), M(M_3), M(M_4), M(M_5), KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - M(M_DEGR),KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(M_SCLN), - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COLN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - M(M_NBSP), KC_TRNS, KC_TRNS, - - // right hand - KC_TRNS, M(M_6), M(M_7), M(M_8), M(M_9), M(M_0), KC_TRNS, - KC_TRNS, KC_EXLM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, CSA_QEST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - CSA(SFT_AGR), M(M_GRV), KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, M(M_NBSP) - ), -/* AltGr-ed BÉPO over Canadian Multilingual - * "////" indicates that the key is disabled (unsupported bépo character) - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | – | — | < | > | [ | ] | | | | ^ | ± | //// | ÷ | × | dead ˘ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | |dead '| & | œ |dead `| | | | ¡ |dead ˇ| ð | //// | ij | ////// | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | ////// | æ | ù |dead "| € | ̛’ |------| |------| © | þ | ß | ® |dead ~| dead ¯ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | \ | { | } | … | ~ | | | | ¿ |dead °| μ | //// |dead ˛| | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | //// | |dead ¸| | - * `----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | _ | |------| |------| | _ | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[LR_CSA_AGR] = KEYMAP( - // left hand - MUC(NDSH), MUC(MDSH), CSA_LESS, CSA_GRTR, CSA_LBRC, CSA_RBRC, KC_TRNS, - KC_TRNS, CSA_PIPE, CSA_DACT, KC_AMPR, CSA_OE, CSA_DGRV, KC_TRNS, - KC_NO, CSA_AE, CSA_UGRV, CSA_DTRM, CSA_EURO, CSA_RQOT, - CSA(AGR_SFT), CSA_BSLS, CSA_LCBR, CSA_RCBR, MUC(ELPS), CSA_TILD, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_UNDS, CSA(AGR_SFT), KC_TRNS, - - // right hand - KC_TRNS, M(M_CRC), CSA_PSMS, KC_NO, CSA_DVSN, CSA_TIMS, CSA_DBRV, - KC_TRNS, CSA_IXLM, CSA_DCAR, CSA_ETH, KC_NO, CSA_IJ, KC_NO, - CSA_CPRT, CSA_THRN, CSA_SRPS, CSA_RTM, CSA_DTLD, CSA_DMCR, - KC_TRNS, CSA_IQST, CSA_DRNG, CSA_MU, KC_NO, CSA_DOGO, CSA(AGR_SFT), - KC_TRNS, KC_NO, KC_TRNS, CSA_DCED, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, CSA(AGR_SFT), KC_UNDS - ), -/* AltGr-shifted BÉPO over Canadian Multilingual - * "////" indicates that the key is disabled (unsupported bépo character or unused in bépo) - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ¶ | //// | “ | ” | //// | //// | | | | //// | ¬ | ¼ | ½ | ¾ | ////// | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ¦ | ˝ | § | Œ | ` | | | | //// | //// | Ð | //// | IJ | ////// | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | ////// | Æ | Ù |dead-˙| //// | //// |------| |------| //// | Þ | ẞ | ™ | //// | º | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | //// | ‘ | ’ | //// | //// | | | | //// | //// | //// | //// | ª | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[LR_CSA_AGR_SFT] = KEYMAP( - // left hand - CSA_PARG, KC_NO, CSA_LDQT, CSA_RDQT, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, CSA_BPIP, CSA_DDCT, CSA_SECT, S(CSA_OE), M(M_GRV), KC_TRNS, - KC_NO, S(CSA_AE), S(CSA_UGRV), CSA_DDTA, KC_NO, KC_NO, - CSA(AGR_SFT), KC_NO, CSA_LQOT, CSA_RQOT, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, CSA(AGR_SFT), KC_TRNS, - - // right hand - KC_TRNS, KC_NO, CSA_NEGT, CSA_1QRT, CSA_1HLF, CSA_3QRT, KC_NO, - KC_TRNS, KC_NO, KC_NO, S(CSA_ETH), KC_NO, S(CSA_IJ), KC_NO, - KC_NO, S(CSA_THRN), S(CSA_SRPS), CSA_TM, KC_NO, CSA_ORDO, - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, CSA_ORDA, CSA(AGR_SFT), - CSA(SFT_AGR), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, CSA(AGR_SFT), KC_TRNS - ), -/* Numeric Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | 0 | 00 | . |Etr/Ctl| - * `----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | | | |n.lock|c.lock| - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[LR_NUMR] = KEYMAP( - // left hand - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, - KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS, - - // right hand - KC_TRNS, KC_F6, KC_F7, KC_TAB, KC_PSLS, KC_PAST, KC_PMNS, - KC_TRNS, KC_TRNS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_UP, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LEFT, KC_DOWN, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_TRNS, KC_P0, M(M_DBL0),KC_PDOT, CTL_T(KC_PENT), - - KC_NLCK, KC_CAPS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* fn layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |~CA-mult| | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | |VolUp | | | | | | | | Pause | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | RESET | | | Calc | Mail |Browsr|------| |------| | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | App | cut | copy |paste | Mute |VolDn | | | | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | Next | | | | | - * | Mute | play |------| |------| | | - * | | | Prev | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[LR_FN] = KEYMAP( - TG(LR_CSA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - RESET, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, - KC_TRNS, KC_APP, S(KC_DELT), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_MPRV, - KC_MUTE, KC_MPLY, KC_MNXT, - - // right hand - KC_INS, KC_EJCT, KC_PWR, KC_SLEP, KC_WAKE, KC_PSCR, KC_SLCK, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -}; - -const uint16_t PROGMEM fn_actions[] = { -}; - -void hold_shift(void) { - register_code(KC_LSHIFT); -} - -void release_shift(void) { - unregister_code(KC_LSHIFT); -} - -uint16_t hextokeycode(int hex) { - if (hex == 0x0) { - return KC_P0; - } else if (hex < 0xA) { - return KC_P1 + (hex - 0x1); - } else { - return KC_A + (hex - 0xA); - } -} - -void send_unicode(uint16_t unicode) -{ - // For more info on how this works per OS, see here: https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input - // Implemented for Windows: - // Pressing ALT followed by + followed by the unicode code point in hex. - // Requires registry key HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad set to String 1 - register_code(KC_LALT); - register_code(KC_PPLS); - unregister_code(KC_PPLS); - - for (int i = 12; i >= 0; i -= 4) { - register_code(hextokeycode((unicode >> i) & 0xF)); - unregister_code(hextokeycode((unicode >> i) & 0xF)); - } - - unregister_code(KC_LALT); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0 ... END_UC: - if (record->event.pressed) { - send_unicode(unicode_chars[id]); - } - break; - case M_CSA_SFT: - // BÉPO over CSA: toggle shift layer - layer_invert(LR_CSA_SFT); - if (record->event.pressed) { - hold_shift(); - } else { - release_shift(); - } - break; - case M_CSA_SFT_AGR: - // BÉPO over CSA: from shift layer, momentary altgr+shift layer - layer_invert(LR_CSA_AGR); - layer_invert(LR_CSA_AGR_SFT); - if (record->event.pressed) { - // shift not needed for LR_CSA_AGR_SFT - release_shift(); - } else { - // back to shift layer - hold_shift(); - } - break; - case M_CSA_AGR_SFT: - // BÉPO over CSA: from altgr layer, momentary altgr+shift layer - layer_invert(LR_CSA_SFT); - layer_invert(LR_CSA_AGR_SFT); - break; - case M_1 ... M_0: - case M_DEGR: - case M_SCLN: - case M_GRV: - case M_NBSP: - // macros of the shift layer that require to release shift - if (record->event.pressed) { - release_shift(); - switch (id) { - case M_1 ... M_0: - register_code(KC_1 + (id - M_1)); - break; - case M_DEGR: - return MACRO(DOWN(CSA_ALTGR), D(SCLN), END); - case M_SCLN: - return MACRO(D(SCLN), END); - case M_GRV: - return MACRO(I(75), DOWN(CSA_ALTGR), TYPE(CSA_DCRC), UP(CSA_ALTGR), T(SPACE), END); - case M_NBSP: - // use weak mod such that pressing another key will not be affected - add_weak_mods(MOD_BIT(CSA_ALTGR)); - return MACRO(D(SPACE), END); - } - } else { - hold_shift(); - switch (id) { - case M_1 ... M_0: - unregister_code(KC_1 + (id - M_1)); - break; - case M_DEGR: - return MACRO(UP(CSA_ALTGR), U(SCLN), END); - case M_SCLN: - return MACRO(U(SCLN), END); - case M_NBSP: - del_weak_mods(MOD_BIT(CSA_ALTGR)); - return MACRO(U(SPACE), END); - } - } - break; - case M_CRC: - if (record->event.pressed) { - return MACRO(I(75), TYPE(CSA_DCRC), T(SPACE), END); - } - break; - case M_DBL0: - if (record->event.pressed) { - return MACRO( I(25), T(P0), T(P0), END ); - } - break; - case M_FNLR: - layer_invert(LR_NUMR); - layer_invert(LR_FN); - break; - case M_NMAL: - layer_invert(LR_NUMR); - if (record->event.pressed) { - register_code(KC_LALT); - } else { - unregister_code(KC_LALT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - // led 1: numeric layer - if (layer_state & (1 << LR_NUMR)) { - ergodox_right_led_1_on(); - } - // led 2: BÉPO over Canadian Multilingual - if (IS_CA_MULT_ENABLED()) { - ergodox_right_led_2_on(); - } - // led 3: caps lock - if (host_keyboard_leds() & (1< | [ | ] | | | | ^ | ± | //// | ÷ | × | dead ˘ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | |dead '| & | œ |dead `| | | | ¡ |dead ˇ| ð | //// | ij | ////// | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ////// | æ | ù |dead "| € | ̛’ |------| |------| © | þ | ß | ® |dead ~| dead ¯ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | \ | { | } | … | ~ | | | | ¿ |dead °| μ | //// |dead ˛| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | //// | |dead ¸| | + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | _ | |------| |------| | _ | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_AGR] = KEYMAP( + // left hand + MUC(NDSH), MUC(MDSH), CSA_LESS, CSA_GRTR, CSA_LBRC, CSA_RBRC, KC_TRNS, + KC_TRNS, CSA_PIPE, CSA_DACT, KC_AMPR, CSA_OE, CSA_DGRV, KC_TRNS, + KC_NO, CSA_AE, CSA_UGRV, CSA_DTRM, CSA_EURO, CSA_RQOT, + CSA(AGR_SFT), CSA_BSLS, CSA_LCBR, CSA_RCBR, MUC(ELPS), CSA_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_UNDS, CSA(AGR_SFT), KC_TRNS, + + // right hand + KC_TRNS, M(M_CRC), CSA_PSMS, KC_NO, CSA_DVSN, CSA_TIMS, CSA_DBRV, + KC_TRNS, CSA_IXLM, CSA_DCAR, CSA_ETH, KC_NO, CSA_IJ, KC_NO, + CSA_CPRT, CSA_THRN, CSA_SRPS, CSA_RTM, CSA_DTLD, CSA_DMCR, + KC_TRNS, CSA_IQST, CSA_DRNG, CSA_MU, KC_NO, CSA_DOGO, CSA(AGR_SFT), + KC_TRNS, KC_NO, KC_TRNS, CSA_DCED, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_UNDS + ), +/* AltGr-shifted BÉPO over Canadian Multilingual + * "////" indicates that the key is disabled (unsupported bépo character or unused in bépo) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ¶ | //// | “ | ” | //// | //// | | | | //// | ¬ | ¼ | ½ | ¾ | ////// | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ¦ | ˝ | § | Œ | ` | | | | //// | //// | Ð | //// | IJ | ////// | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ////// | Æ | Ù |dead-˙| //// | //// |------| |------| //// | Þ | ẞ | ™ | //// | º | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | //// | ‘ | ’ | //// | //// | | | | //// | //// | //// | //// | ª | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_AGR_SFT] = KEYMAP( + // left hand + CSA_PARG, KC_NO, CSA_LDQT, CSA_RDQT, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, CSA_BPIP, CSA_DDCT, CSA_SECT, S(CSA_OE), M(M_GRV), KC_TRNS, + KC_NO, S(CSA_AE), S(CSA_UGRV), CSA_DDTA, KC_NO, KC_NO, + CSA(AGR_SFT), KC_NO, CSA_LQOT, CSA_RQOT, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_TRNS, + + // right hand + KC_TRNS, KC_NO, CSA_NEGT, CSA_1QRT, CSA_1HLF, CSA_3QRT, KC_NO, + KC_TRNS, KC_NO, KC_NO, S(CSA_ETH), KC_NO, S(CSA_IJ), KC_NO, + KC_NO, S(CSA_THRN), S(CSA_SRPS), CSA_TM, KC_NO, CSA_ORDO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, CSA_ORDA, CSA(AGR_SFT), + CSA(SFT_AGR), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_TRNS + ), +/* Numeric Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | 0 | 00 | . |Etr/Ctl| + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | |n.lock|c.lock| + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[LR_NUMR] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS, + + // right hand + KC_TRNS, KC_F6, KC_F7, KC_TAB, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_UP, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LEFT, KC_DOWN, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_TRNS, KC_P0, M(M_DBL0),KC_PDOT, CTL_T(KC_PENT), + + KC_NLCK, KC_CAPS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |~CA-mult| | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | |VolUp | | | | | | | | Pause | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | RESET | | | Calc | Mail |Browsr|------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | App | cut | copy |paste | Mute |VolDn | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | Next | | | | | + * | Mute | play |------| |------| | | + * | | | Prev | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[LR_FN] = KEYMAP( + TG(LR_CSA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + RESET, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, + KC_TRNS, KC_APP, S(KC_DELT), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_MPRV, + KC_MUTE, KC_MPLY, KC_MNXT, + + // right hand + KC_INS, KC_EJCT, KC_PWR, KC_SLEP, KC_WAKE, KC_PSCR, KC_SLCK, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +void hold_shift(void) { + register_code(KC_LSHIFT); +} + +void release_shift(void) { + unregister_code(KC_LSHIFT); +} + +uint16_t hextokeycode(int hex) { + if (hex == 0x0) { + return KC_P0; + } else if (hex < 0xA) { + return KC_P1 + (hex - 0x1); + } else { + return KC_A + (hex - 0xA); + } +} + +void send_unicode(uint16_t unicode) +{ + // For more info on how this works per OS, see here: https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input + // Implemented for Windows: + // Pressing ALT followed by + followed by the unicode code point in hex. + // Requires registry key HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad set to String 1 + register_code(KC_LALT); + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + for (int i = 12; i >= 0; i -= 4) { + register_code(hextokeycode((unicode >> i) & 0xF)); + unregister_code(hextokeycode((unicode >> i) & 0xF)); + } + + unregister_code(KC_LALT); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0 ... END_UC: + if (record->event.pressed) { + send_unicode(unicode_chars[id]); + } + break; + case M_CSA_SFT: + // BÉPO over CSA: toggle shift layer + layer_invert(LR_CSA_SFT); + if (record->event.pressed) { + hold_shift(); + } else { + release_shift(); + } + break; + case M_CSA_SFT_AGR: + // BÉPO over CSA: from shift layer, momentary altgr+shift layer + layer_invert(LR_CSA_AGR); + layer_invert(LR_CSA_AGR_SFT); + if (record->event.pressed) { + // shift not needed for LR_CSA_AGR_SFT + release_shift(); + } else { + // back to shift layer + hold_shift(); + } + break; + case M_CSA_AGR_SFT: + // BÉPO over CSA: from altgr layer, momentary altgr+shift layer + layer_invert(LR_CSA_SFT); + layer_invert(LR_CSA_AGR_SFT); + break; + case M_1 ... M_0: + case M_DEGR: + case M_SCLN: + case M_GRV: + case M_NBSP: + // macros of the shift layer that require to release shift + if (record->event.pressed) { + release_shift(); + switch (id) { + case M_1 ... M_0: + register_code(KC_1 + (id - M_1)); + break; + case M_DEGR: + return MACRO(DOWN(CSA_ALTGR), D(SCLN), END); + case M_SCLN: + return MACRO(D(SCLN), END); + case M_GRV: + return MACRO(I(75), DOWN(CSA_ALTGR), TYPE(CSA_DCRC), UP(CSA_ALTGR), T(SPACE), END); + case M_NBSP: + // use weak mod such that pressing another key will not be affected + add_weak_mods(MOD_BIT(CSA_ALTGR)); + return MACRO(D(SPACE), END); + } + } else { + hold_shift(); + switch (id) { + case M_1 ... M_0: + unregister_code(KC_1 + (id - M_1)); + break; + case M_DEGR: + return MACRO(UP(CSA_ALTGR), U(SCLN), END); + case M_SCLN: + return MACRO(U(SCLN), END); + case M_NBSP: + del_weak_mods(MOD_BIT(CSA_ALTGR)); + return MACRO(U(SPACE), END); + } + } + break; + case M_CRC: + if (record->event.pressed) { + return MACRO(I(75), TYPE(CSA_DCRC), T(SPACE), END); + } + break; + case M_DBL0: + if (record->event.pressed) { + return MACRO( I(25), T(P0), T(P0), END ); + } + break; + case M_FNLR: + layer_invert(LR_NUMR); + layer_invert(LR_FN); + break; + case M_NMAL: + layer_invert(LR_NUMR); + if (record->event.pressed) { + register_code(KC_LALT); + } else { + unregister_code(KC_LALT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + // led 1: numeric layer + if (layer_state & (1 << LR_NUMR)) { + ergodox_right_led_1_on(); + } + // led 2: BÉPO over Canadian Multilingual + if (IS_CA_MULT_ENABLED()) { + ergodox_right_led_2_on(); + } + // led 3: caps lock + if (host_keyboard_leds() & (1< 1463041 bytes keyboards/ergodox/keymaps/absenth/keymap.c | 12 ++++++------ keyboards/ergodox/keymaps/absenth/readme.md | 3 +++ 3 files changed, 9 insertions(+), 6 deletions(-) (limited to 'keyboards/ergodox') diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png index a0596b281..c07aa8803 100644 Binary files a/keyboards/ergodox/keymaps/absenth/absenth_highres.png and b/keyboards/ergodox/keymaps/absenth/absenth_highres.png differ diff --git a/keyboards/ergodox/keymaps/absenth/keymap.c b/keyboards/ergodox/keymaps/absenth/keymap.c index 30f747419..ded668e13 100644 --- a/keyboards/ergodox/keymaps/absenth/keymap.c +++ b/keyboards/ergodox/keymaps/absenth/keymap.c @@ -15,9 +15,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * | BkSp | A/L2 | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * | LS/PO |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RS/PC | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | * `----------------------------------' `----------------------------------' @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_LSPO, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, ALT_T(KC_APP), KC_LGUI, KC_HOME, @@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSPC, KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, KC_LALT, CTL_T(KC_ESC), KC_PGUP, @@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | MsUp | | | | | | | | | | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * | | |MsLeft|MsDown|MsRght| |------| |------| left | down | up | down | | Play | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | | | | | | | | | | | Prev | Next | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | * ,------|------|------| |------+------+------. * | | | | | | |Brwser| - * | | |------| |------| |Back | + * | Lclk | Rclk |------| |------| |Back | * | | | | | | | | * `--------------------' `--------------------' */ diff --git a/keyboards/ergodox/keymaps/absenth/readme.md b/keyboards/ergodox/keymaps/absenth/readme.md index 35d0aad46..0c04bf417 100644 --- a/keyboards/ergodox/keymaps/absenth/readme.md +++ b/keyboards/ergodox/keymaps/absenth/readme.md @@ -2,6 +2,9 @@ ## Changelog + +* Sept. 14, 2016 (V0.2): + * Added Space Cadet to Left and Right Shift. Pressing Left shift with no other key adds an "(" and pressing Right shift with no other key adds an ")" * Sept. 8, 2016 (V0.1): * Made A key double as MEDIA Layer change when you hold it. Added mouse buttons to the large thumb buttons on the left side on the Media Layer. Added vi/vim style arrow keys on HJKL on media layer. -- cgit v1.2.3