From a5b1af4999345239df5086351b52a5b4d2daa97e Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sat, 27 Aug 2016 18:40:50 +0300 Subject: Normalize line endings --- keyboards/chibios_test/teensy_lc_onekey/chconf.h | 1048 ++++++++++----------- keyboards/chibios_test/teensy_lc_onekey/halconf.h | 374 ++++---- keyboards/chibios_test/teensy_lc_onekey/mcuconf.h | 110 +-- 3 files changed, 766 insertions(+), 766 deletions(-) (limited to 'keyboards/chibios_test/teensy_lc_onekey') diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h index cb36996c3..3294ac7ee 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h +++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h @@ -1,524 +1,524 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h index b1d2cd550..0436408b0 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h +++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h @@ -1,187 +1,187 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h index c63659019..2764e8898 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h +++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h @@ -1,55 +1,55 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* Need to redefine this, since the default is for K20x */ -/* This is for Teensy LC; you should comment it out (or change to 5) - * for Teensy 3.x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* Need to redefine this, since the default is for K20x */ +/* This is for Teensy LC; you should comment it out (or change to 5) + * for Teensy 3.x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ -- cgit v1.2.3