From d06e940a179b2e81563cf6123461cfcad35f9045 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Tue, 24 May 2016 23:55:29 -0400 Subject: [Erez & Jack] Removes keyboards which are not active on qmk --- keyboard/infinity/tool/README | 103 ----------------------- keyboard/infinity/tool/k20dx32_flash.cfg | 139 ------------------------------- keyboard/infinity/tool/openocd.cfg | 13 --- 3 files changed, 255 deletions(-) delete mode 100644 keyboard/infinity/tool/README delete mode 100644 keyboard/infinity/tool/k20dx32_flash.cfg delete mode 100644 keyboard/infinity/tool/openocd.cfg (limited to 'keyboard/infinity/tool') diff --git a/keyboard/infinity/tool/README b/keyboard/infinity/tool/README deleted file mode 100644 index 698314e25..000000000 --- a/keyboard/infinity/tool/README +++ /dev/null @@ -1,103 +0,0 @@ -OpenOCD config files for Kinetis -================================ -http://nemuisan.blog.bai.ne.jp/?eid=192848#OPENOCD - -These are needed for debug and programing bootloader with SWD. To flash keyboard firmware use 'dfu-util'. - -Flash security of Freescale kinetis ------------------------------------ -If FSEC of flash config is changed accidentally SWD/JTAG you can't get debug access until doing 'mdm mass_erase' with JTAG, CMSIS-DAP or OpenSAD adapter. HLA(high level adapter) like stlink doesn't work for this. - - -Example -------- -Debug: - $ openocd -s tool -f tool/openocd.cfg - $ arm-none-eabi-gdb build/infinity.elf -ex "target remote localhost:3333" - -Flash bootloader: - $ openocd -s tool -f tool/openocd.cfg -c "mt_flash kiibohd_bootloader.bin" - - -Infinity SWD pinout -------------------- -SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, 5V from top. -Note that RESET is also needed to get full control with OpenOCD. - - -------- - | ___ o |CLK - ||RST| o |DIO - ||BTN| o |GND - | --- o |5V - -------- - - -Kinetis sercure state ----------------------- -openocd 0.9.0 - -Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! ********** -Warn : **** **** -Warn : **** Your Kinetis MCU is in secured state, which means that, **** -Warn : **** with exception for very basic communication, JTAG/SWD **** -Warn : **** interface will NOT work. In order to restore its **** -Warn : **** functionality please issue 'kinetis mdm mass_erase' **** -Warn : **** command, power cycle the MCU and restart OpenOCD. **** -Warn : **** **** -Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! ********** - - -Info : MDM: Chip is unsecured. Continuing. -target state: halted -target halted due to debug-request, current mode: Thread -xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc -auto erase enabled -Info : Probing flash info for bank 0 -Warn : flash configuration field erased, please reset the device -wrote 4096 bytes from file kiibohd_bootloader.bin in 2.442562s (1.638 KiB/s) -Info : MDM: Chip is unsecured. Continuing. - - - - -Open On-Chip Debugger 0.9.0-dev-00346-g3e1dfdc-dirty (2015-03-21-20:41) -Licensed under GNU GPL v2 -For bug reports, read - http://openocd.sourceforge.net/doc/doxygen/bugs.html -Info : only one transport option; autoselect 'cmsis-dap' -Kinetis MUST need Hardware SRST Control to Recover Secure-State! -adapter_nsrst_delay: 200 -srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst -Info : add flash_bank kinetis k20.pflash -cortex_m reset_config sysresetreq -adapter speed: 1000 kHz -srst_only separate srst_nogate srst_open_drain connect_assert_srst -Info : CMSIS-DAP: SWD Supported -Info : CMSIS-DAP: Interface Initialised (SWD) -Info : CMSIS-DAP: FW Version = 1.0 -Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1 -Info : Connecting under reset -Info : DAP_SWJ Sequence (reset: 50+ '1' followed by 0) -Info : CMSIS-DAP: Interface ready -Info : clock speed 1000 kHz -Info : IDCODE 0x2ba01477 -Warn : Adapter returned success despite SSTICKYERR being set. -Warn : Adapter returned success despite SSTICKYERR being set. -Warn : Adapter returned success despite SSTICKYERR being set. -Warn : Adapter returned success despite SSTICKYERR being set. -Info : k20.cpu: hardware has 6 breakpoints, 4 watchpoints -Info : MDM: Chip is unsecured. Continuing. -Info : MDM: Chip is unsecured. Continuing. -target state: halted -target halted due to debug-request, current mode: Thread -xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc -auto erase enabled -Info : Probing flash info for bank 0 -Warn : flash configuration field erased, please reset the device -wrote 4096 bytes from file kiibohd_bootloader.bin in 2.446902s (1.635 KiB/s) -Info : MDM: Chip is unsecured. Continuing. -Info : Halt timed out, wake up GDB. -Error: timed out while waiting for target halted -Runtime Error: tool/k20dx32_flash.cfg:81: -in procedure 'mt_flash' -in procedure 'halt' called at file "tool/k20dx32_flash.cfg", line 81 diff --git a/keyboard/infinity/tool/k20dx32_flash.cfg b/keyboard/infinity/tool/k20dx32_flash.cfg deleted file mode 100644 index 1e3deb091..000000000 --- a/keyboard/infinity/tool/k20dx32_flash.cfg +++ /dev/null @@ -1,139 +0,0 @@ -# FreeScale Kinetis K20 devices with 32kB Flash and 8kB Local On-Chip SRAM, -# Nemuisan's Special for MK20DN32VFT5,MK20DX32VFT5,MK10DN32VFT5,MK10DX32VFT5 - - -# 0.8.0 has no these procs -proc using_jtag {} { - set _TRANSPORT [ transport select ] - expr { [ string first "jtag" $_TRANSPORT ] != -1 } -} - -proc using_swd {} { - set _TRANSPORT [ transport select ] - expr { [ string first "swd" $_TRANSPORT ] != -1 } -} - -proc using_hla {} { - set _TRANSPORT [ transport select ] - expr { [ string first "hla" $_TRANSPORT ] != -1 } -} - -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME k20 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - if { [using_jtag] } { - set _CPUTAPID 0x4BA00477 - } { - # this is the SW-DP tap id not the jtag tap id - set _CPUTAPID 0x2BA01477 - } -} - -# Work-area is a space in RAM used for flash programming -# By default use 8kB -if { [info exists WORKAREASIZE] == 0 } { - set _WORKAREASIZE 0x2000 -} - -# Select "srst_only", Nemuisan said so! -echo "Kinetis MUST need Hardware SRST Control to Recover Secure-State!" -adapter_nsrst_delay 200 -reset_config srst_only - -swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME - -# It is important that "kinetis mdm check_security" is called for -# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start' -# causes "kinetis mdm check_security" to fail the first time openocd -# calls it when it tries to connect after the CPU has been power-cycled. -$_CHIPNAME.cpu configure -event examine-end { - kinetis mdm check_security -# Uncomment when gone into s*ck'n secured state! -# kinetis mdm mass_erase -} - -# K20 has minimun 8kB of SRAM and starts at 1FFFF000. -$_TARGETNAME configure -work-area-phys 0x1FFFF000 -work-area-size $_WORKAREASIZE -work-area-backup 0 -rtos auto - -# MK20DN32VFT5,MK20DX32VFT5,MK10DN32VFT5,MK10DX32VFT5 has 32kB of flash memory. -flash bank $_CHIPNAME.pflash kinetis 0x00000000 0x8000 0 4 $_TARGETNAME - - -proc mt_flash {IMGFILE} { - flash write_image erase $IMGFILE - reset run - halt - verify_image $IMGFILE - reset run - shutdown -} - -proc mt_flash_bin {IMGFILE OFFSET} { - flash write_image erase $IMGFILE $OFFSET bin - reset run - halt - verify_image $IMGFILE $OFFSET bin - reset run - shutdown -} - -proc mt_flash_hex {IMGFILE} { - flash write_image erase $IMGFILE 0 ihex - reset run - halt - verify_image $IMGFILE 0 ihex - reset run - shutdown -} - -proc mt_flash_srec {IMGFILE} { - flash write_image erase $IMGFILE 0 s19 - reset run - halt - verify_image $IMGFILE 0 s19 - reset run - shutdown -} - -proc mass_erase {} { - kinetis mdm mass_erase -} - -proc eraser {} { -# Verbose procedure confirmed erase routine - flash info 0 -# CAUTION! "flash erase_sector 0 0 last" goes into secure state!!! -# USE "mass_erase" command instead of -# flash erase_sector 0 0 last - mass_erase - shutdown -} - -#debug_level 3 -# HLA doesn't have cortex_m commands -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} -adapter_khz 1000 -reset_config srst_only srst_nogate connect_assert_srst -gdb_target_description disable -init -reset init diff --git a/keyboard/infinity/tool/openocd.cfg b/keyboard/infinity/tool/openocd.cfg deleted file mode 100644 index 2b0a63b93..000000000 --- a/keyboard/infinity/tool/openocd.cfg +++ /dev/null @@ -1,13 +0,0 @@ -# mchack openocd -# https://github.com/mchck/mchck/wiki/Openocd -# -# adapter: frdm-kl05z with cmsis-dap firmware -# inteface: cmsis-dap -# transport: hla_swd -# target: MK20DX128VLF5 Freescale Kinetis - -# adapter/interface -source [find interface/cmsis-dap.cfg] - -# CPU -source [find k20dx32_flash.cfg] -- cgit v1.2.3