summaryrefslogtreecommitdiff
path: root/keyboards
AgeCommit message (Collapse)Author
2017-06-30Update keyboards' rules.mk/Makefiles (#1442)Jack Humbert
this may change some of the keyboards' default settings - if you experience anything odd, please check back to this commit
2017-06-28update some copyright headersJack Humbert
2017-06-28cleanup nyquistJack Humbert
2017-06-28cleanup orthodoxJack Humbert
2017-06-28cleanup lets_splitJack Humbert
2017-06-27don't let timer1 exist without b5 being enabledJack Humbert
2017-06-27add new arguements, docsJack Humbert
2017-06-27Create sv_SE Qwerty layout for ErgoDoxAndreas Lindhé
*NOTE:* it might still be desirable to set the software layout to sv_SE in your OS. Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration I have tried making this as close of a match I could between the [default ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a standard Swedish Qwerty layout. Notable differences from default: ================================= * There are three special character buttons (acute accent, circumflex/tilde and apostrophe/asterisk) that don't have any buttons to map to naturally. I've put these at other places: * Acute accent (´) can be found in the lower left corner, conveniently placed to reach for making an é. * Apostrophe (') was put in the lower left corner, close to acute accent. * Circumflex (^) and asterisk (*) was placed in the lower right corner. * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left those out. I could only get the buttons to produce a single one of the characters. How can I get it to work properly? * The Alt button on right thumb was exchanged for AltGr (RAlt). * I changed the backslash in the numpad (layer 1) for a minus. Thought it was more sensible. * I didn't find a good place for the "<>|" button, so that one was left out. That is a problem that really needs to be resolved. Pipe can be found on layer one, however.
2017-06-25Merge pull request #1431 from rai-suta/masterJack Humbert
Bugg fix and add keymap for testing JIS_KEYCODE switch.
2017-06-25Whitefox LED control (#1432)Ethan Madden
* use new grave_esc functionality * Port LED control from Ergodox Infinity to Whitefox
2017-06-25add support for Orthodox keyboard (#1436)Art Ortenburger
* Added orthodox * Modified readme * Modified readme * Modified readme * Updated makefile * Fixed keymap issues * Modified serial communications to allow for over 8 columns * Fixed sizeof command * Fixed some typing issues * Testing issue #1191 (n-column split i2c slave) Based on initial OrthoDox (serial) config by @reddragond and others, this attempts to add TWI (I2C) support. Relevant: <https://github.com/qmk/qmk_firmware/issues/1191> - per @ahtn recommendation, using memcpy for moving slave matrix into slave sending buffer - slave buffer has been enlarged using sizeof(matrix_row_t) - note: i2c.h now includes matrix.h - note: matrix.c includes <string.h> * Added i2c keymap - right col still not working * orthodox: re-added i2c keymap, based on serial * orthodox / issue #1191: trying 9-bit serial - orthodox serial protocol now sends 9 bits per row, instead of 16. Technically it's using MATRIX_COLS, so it might work generically. - ROW_MASK is #defined in serial.c to truncate the checksums to prevent overflows causing false errors. This macro should be renamed if it's kept. * Revert "Fixed sizeof command" This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9. Changes had been made to the lets_split serial driver for testing which mirrored the multi-byte-row changes made to support the orthodox. As the lets_split does not require these changes, and new improvements had been added to the orthodox port only, this commit reverts them. Because the new code could potentially reduce latency over the serial transport, it may be desirable to re-add in the future, by backporting the current working orthodox code. * orthodox: default serial keymap improvements - formatting has been improved - a few keys have been shifted, mainly in Raise and Lower layers, to be more like the default Planck layout - Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play Still To Do: - duplicate for TWI - Alt modifier - GUI modifier * orthodox: failed attempt at 16b/row TWI - duplicated updated serial keymap for "i2c" - removed string.h/memcpy, instead - hardcoded copying of six bytes per update - still doesn't work; master reports interconnect errors on txled * orthodox: adjusted default keymap - this is applied to both 'serial' and 'i2c' keymaps - Alt and GUI have been added, as they were missing - comma and period persist across more layers; Home/PgUp and End/PgDn have been moved slightly to accommodate * orthodox: revert TWI support to minimum to debug - disabled ssd1306 and hardware locking in build configuration - increased TWI buffer from 0x10 to 0x20 bytes - decreased TWI clock from 400000 to 100000 - removed hardcoded TWI multi-byte sending/receiving An 'i2c' build of this was found to work on a rev1 Orthodox, although slave-side col9 was understandably not working. When testing-time permits, features will be gradually re-enabled towards getting the full matrix supported over TWI. * orthodox: TWI (i2c) is working, kludge for col9 The TWI interconnect ("i2c" in directories and build config) is now working for the Orthodox, including the slave half's column #9. This is intended as an interim solution, as it's a kludge, not a fix. Rather than a working multi-byte implementation, the two col9 keys' bits are packed-into and unpacked-from the two unused bits in row1. Furthermore, the TWI clock constant has been reduced to 100000 from 400000, as testing revealed the higher value just didn't work. Testing also found that (with this kludge) increasing the TWI buffer was not necessary. This commit leaves many commented-out lines in matrix.c from previous testing, which will be removed in a future commit once the interconnects' multi-byte problems have been debugged more thoroughly. * orthodox: updated readme.md The readme for the Orthodox now includes a description of the keyboard, allusions to its author and availability, a linked photo, and links to the evolving build guide and the current keymap on KLE. This update has been prepared with /u/Deductivemonkee's assistance.
2017-06-25updates olkb readmes #1362Jack Humbert
2017-06-26Add a keymap for testing JIS_KEYCODE.rai-suta
2017-06-25Merge pull request #1427 from blakedietz/masterJack Humbert
Add keymaps for ergodox ez, hhkb and jd45 under user blakedietz
2017-06-25Merge pull request #1429 from fredizzimo/fixes_for_emulatorJack Humbert
Minor fixes to support the emulator
2017-06-24Add keymaps for ergodox ez, hhkb and jd45 under user blakedietzBlake Dietz
2017-06-24Remove the DIODE_DIRECTION defines from lets_split so we can close #1067skullY
2017-06-24Fix typoDario Giovannetti
2017-06-23Merge pull request #1422 from nstickney/masterJack Humbert
update ErgoDox "Familiar" layout
2017-06-23Merge pull request #1418 from npoirey/masterJack Humbert
Frenchdev v1
2017-06-23Updated frenchdev readmenpoirey
2017-06-24Change inline to static inlineFred Sundvik
2017-06-24Delete emulator driversFred Sundvik
2017-06-23updated README.mdStick
2017-06-23Merge remote-tracking branch 'upstream/master'Stick
2017-06-23added media keys; many bug fixesStick
2017-06-23Refactoring frenchdevnpoirey
2017-06-23Moved frenchdev to handwirednpoirey
2017-06-23Merge pull request #1421 from 333fred/update-layoutJack Humbert
Update my layout
2017-06-23Doc updatesFredric Silberberg
2017-06-23Copy/paste additions.Fredric Silberberg
2017-06-23Added backlight control keysFredric Silberberg
2017-06-23Added a few more VS macros and another ctrlFredric Silberberg
2017-06-23Small keymap layout updatesFredric Silberberg
2017-06-23Update Phantom readmeMathias Andersson
Added basic description of the keyboard and some build and configuration instructions. Also moved the RGB underlight modification instructions to the readme.
2017-06-23Adjust Phantom for standard PCBMathias Andersson
The previous default configuration and keymap was made for a Phantom modified with RGB underlight. This commit makes the default more in line with the "official" configurations provided by the PCB. The previous default have been moved to a separate keymap named `rgbmod`. It has also been updated to better match the template keymap.
2017-06-23Update Phantom config to better match templateMathias Andersson
2017-06-23Move Phantom LED handling to phantom.cMathias Andersson
This is more in line with the structure provided by the keyboard template.
2017-06-22added tapdance lockingStick
2017-06-22Removed image from git and added references to imgur album for Frenchdev ↵npoirey
keyboard.
2017-06-22Merge remote-tracking branch 'upstream/master'Stick
2017-06-22Merge pull request #1416 from geofflane/feature/s65_x_std_grv_escJack Humbert
Use the new Quantum KC_GESC instead of custom code
2017-06-22Merge pull request #1331 from ariasuni/masterErez Zukerman
Fix undefined reference errors with avr-gcc 7.1
2017-06-22Fix warning in frenchdevnpoirey
2017-06-22Frenchdev v1npoirey
2017-06-21Use the new Quantum KC_GESC instead of custom codeGeoff Lane
2017-06-20Merge pull request #1414 from dvdizon/kbd75Jack Humbert
KBD75 - Initial KBD75 port from qmkeyboard.cn source files
2017-06-20Merge pull request #1413 from lasko/masterJack Humbert
This is a complete redo of my keymap. It includes several
2017-06-19KBD75 - Initial KBD75 port from qmkeyboard.cn source filesDavid Dizon
2017-06-19Added custom keymap and enabled Space CadetJon Nall