summaryrefslogtreecommitdiff
path: root/keyboard
AgeCommit message (Collapse)Author
2016-06-15updates experimental planck keymap, adds basic layoutJack Humbert
2016-06-14Update the ergodox-ez/algernon keymap (#409)Gergely Nagy
Compared to the previous version, the following noteworthy changes have been made to the keymap: * The keyboard starts in NKRO mode, bootmagic and other things are disabled. * A STENO layer was added, to be used with Plover. * An experimental layout was added, something halfway between Dvorak and Capewell-Dvorak. A work in progress. * `LEAD y` types \o/. * Some keys on the BASE layer have been moved around: - `?` moved to the left pinky, left of `Q`. - `=` shifted one row down, but `F11` stayed where it was. - `-` on the left half was replaced by `Tab`. - `Tab`'s original position is taken by a `Media Next`/`Media Prev` key. - `:` now inputs `;` when shifted. * `ESC` cancels the **HUN** layer too, not just modifiers. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-06-14Add sgoodwin keymap for the KC60 (#410)Samuel Goodwin
* Don't save the ctags file in the repo. * Initial support for the KC60 board. Only 5x5 working so far. * Rename because this isn't the same KC60 as others. * Add in some generic layout. Pins seem to be in the right order except the 6th column spews gibberish. * Don't need this for now. * Move this to some other folder. * Trying again to start over. * Don't need to start over because I figured out why the 'broken' stuff wasn't working. * Attempt to enable backlighting. It's on on pin B7 like other boards. * Fix last port changes and fix LED control in keymap. * Trying some other LED code. * Bootloader needs to be bigger. Disabling backlight for now. * Simplify LED code while I try to figure it out. * Turn back on backlighting. * Backlighting works now. Just need to get levels or breathing working. * Trying to allow for turning off the LEDs before I get to brightness levels. * The missing link: need to run the init_ports function for LEDs to work properly. * Removing breathing stuff since it bricks the board. * Clean up default layer. * Cleanup keymap, KC60 doesn't support a 5th right bottom-row button. * Add in the keymap I want for now. * Back to escape by default. * Move my personal keymap to the new place for keymaps. * Add the version number for clarity.
2016-06-13adds support for GH60 Satan keyboard (#407)TerryMathews
* adds support for GH60 Satan keyboard ANSI 125 layout, capslock and backlight implemented, support for WS2812LED strip included * added Phantom and GH60 Satan to travis
2016-06-13Renaming planck/cbbrowne in keeping with recent naming conventions (#405)Christopher Browne
* More documentation * Saving crontab for user on host * Restructuring in keeping with recent changes to conventions * Simplify submitting my fave cbbrowne keystroke by using SEND_STRING() * Local change, not apropos to have in this repo * Simplify logic; no need to return so much
2016-06-12adds support for Phantom TKL keyboard (#399)TerryMathews
ANSI 125 layout, capslock and scrolllock implemented, support for WS2812LED strip included.
2016-06-12Move LED strip initialization (#397)Eric Tang
2016-06-11Makefile redo & other features (#395)Jack Humbert
* .build containment implemented * no destructive variable setting - builds in either folder * make from 3 places * cleans before each build * make from root with keyboard=keyboard, keymap=keymap * make from keyboard/keyboard with keymap=keymap * make from keymaps/keymap * only implemented on planck * adds color diag to avr-gcc * makefiles for all plancks, clean-up * quick build-all makefile for plancks * reformatting of make output (colors) * color toggle, tmk path corrections * correct if statement for color * move config.h to main makefile, updates preonic, atomic * format update, all keyboards targets * makefile optional for build all target, alps and arrow_pad updated * alps updated * make planck default, trying out travis recipe for all-keyboards * all-keymaps target, different travis recipe * updates alps64 * updates keyboards to new format * updates clue* projects * all projects updated, specialise EZ .hex, let .hex through * updates travis * automatically find root, keyboard, keymap * silent echo, cleaned-up mass make output * updates all keyboards' .hex files except EZ * Rename Bantam44.c to bantam44.c * Rename Bantam44.h to bantam44.h * nananana * adds six key keyboard * does same to ez as rest * updates send_string example * brings ergodox_ez up to date * updates template/new project script * adds sixkeyboard * adds readme for sixkeyboard * adds sixkeyboard to travis * filenames, gitignore mess * define clock prescaler stuff manually * make quick, size test example * documentation and dfu-no-build
2016-06-07Merge pull request #364 from techtomas/techtomasErez Zukerman
Rearranged the layer toggles and keys.
2016-06-07Updated readme to fix a typo and list out hotkey shortcutsThomas Anderson
2016-06-06Merge pull request #384 from gid0/masterErez Zukerman
Merge ErgoDox bepo layout changes.
2016-06-06Adds Python script to util directory for easier discoverabilityErez Zukerman
2016-06-06Spellchecking.Olivier
2016-06-06Add some more function keys (vol up / down, mute, undo, cut, copy, paste).Olivier
2016-06-05Add basic README file.Olivier
2016-06-05adds planck keymap readmeJack Humbert
2016-06-04Move keys and especially TAB more like on a TypeMatrix 2020 keyboard. Add a ↵Olivier
left SHIFT key.
2016-06-04Merged the function and navigation layers. Give access to it with both ↵Olivier
thumbs. Now you can up / down / page up / page down with only one hand !
2016-06-04cleans up folder structureJack Humbert
* consolidates docs * deletes converter/ * updates .md references (most)
2016-06-02Update prebuilt firmware with code from latest pull.Olivier
2016-06-01new line/tab in send_stringJack Humbert
2016-06-01Submitting ArrowPad, A QMK-based 21/24 key keypad (#372)IBNobody
* Created arrow pad, a QMK based numpad designed for heavy text editing * Enabled backlighting, numlock indicator, and forced nkro for arrowpad * WIP Arrowpad 21 * WIP Arrowpad 21 * Combined Arrow Pad 21 and 24 * Combined Arrow Pad 21 and 24 * Removed 21 folder
2016-06-01Merge pull request #297 from gid0/masterErez Zukerman
Add an ErgoDox bépo layout.
2016-05-31Merge pull request #367 from waveform80/fix-unselect-rows-prototypeErez Zukerman
Squash the prototype compiler warning
2016-05-31Merge pull request #368 from waveform80/daves-layout-readmeErez Zukerman
Added a README and minor tweaks for "dave" KEYMAP
2016-05-31Merge pull request #356 from johgh/masterErez Zukerman
ergodox_ez: added dvorak_spanish layout
2016-05-31Update to Makefile an ergodox readme (#365)Hartmut Goebel
* Autodetect teensy-loader-cli over teensy_loader_cli. Some distributions (e.g. Arch Linux, Guix) install teensy_loader_cli as teensy-loader-cli. Use this one if it is installed. * Update ergodox_ez/readme.md - Mention Linux distris providing teensy-loader-cli - Mention `make teensy ...`
2016-05-31Added a README and minor tweaksDave Jones
2016-05-31Squash the prototype compiler warningDave Jones
unselect_rows declared with no parameter list; requires (void) to prevent compiler warning
2016-05-30Rearranged the layer toggles and keys.Thomas Anderson
Moved the layer toggles to be in more comfortable locations for my typing. Also expanded the use of the media layer (now called APP) and enhanced the text navigation on the control layer
2016-05-30ergodox_ez: added dvorak_spanish layoutjorge
2016-05-29Merge pull request #353 from algernon/ergodox-ez/algernonErez Zukerman
My layout for the ErgoDox EZ
2016-05-29Add support for the KC60 v2.0 2015-09-12 (#360)Samuel Goodwin
* Don't save the ctags file in the repo. * Initial support for the KC60 board. Only 5x5 working so far. * Rename because this isn't the same KC60 as others. * Add in some generic layout. Pins seem to be in the right order except the 6th column spews gibberish. * Don't need this for now. * Move this to some other folder. * Trying again to start over. * Don't need to start over because I figured out why the 'broken' stuff wasn't working. * Attempt to enable backlighting. It's on on pin B7 like other boards. * Fix last port changes and fix LED control in keymap. * Trying some other LED code. * Bootloader needs to be bigger. Disabling backlight for now. * Simplify LED code while I try to figure it out. * Turn back on backlighting. * Backlighting works now. Just need to get levels or breathing working. * Trying to allow for turning off the LEDs before I get to brightness levels. * The missing link: need to run the init_ports function for LEDs to work properly. * Removing breathing stuff since it bricks the board. * Clean up default layer. * Cleanup keymap, KC60 doesn't support a 5th right bottom-row button.
2016-05-29Fix build errors (#359)Daniel Svensson
* brings gh60 up-to-date (needs testing) * brings hhkb up-to-date (needs testing) * brings jd45 up-to-date (needs testing)
2016-05-28brings alps64 up-to-date (needs testing)Jack Humbert
2016-05-26ergodox_ez/algernon: Add a HEX fileGergely Nagy
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-05-26ergodox_ez/algernon: New layout.Gergely Nagy
This is a squashed up version of the layout I have been working on for the past month or so. Based on Dvorak, with a lot of unconventional stuff thrown in for good measures. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-05-26ergodox_ez: Add a SuperCoder keymapGergely Nagy
Inspired by @faxm0dem, and the SuperCoder 2000 "keyboard". Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-05-25Add single and double quotes to numpad layerNathan Sharfi
…as well as recover from a bunch of Git user errors.
2016-05-25Add double quote for everyone; update ZweihanderNathan Sharfi
2016-05-24[Erez & Jack] Removes keyboards which are not active on qmkErez Zukerman
2016-05-24[Erez & Jack] Packages Space Cadet shifts into keycodesErez Zukerman
2016-05-24[Erez & Jack] Documents new Leader key functionalityErez Zukerman
2016-05-24Converted audio play functions to *_user (#349)Jack Humbert
* Updated personal layouts * tweaked personal * Nightly - Audio Cleanup Refactored the LUTs. Abstracted some of the registers out of audio to use more functional names. Split audio into audio and audio_pwm. WIP * nightly - collapsed code * Added check for note playing to LEDs * Usability tweaks * TWEAE * nightly added extra kcs to keymap common * turned on Plank audio * Added backlight breathing to atomic * reverted accidental merge * Added music and audio toggles to Quantum.c * Redid the audio callbacks * Adjusted default planck layout to use the user tone naming * tabs to spaces * Rewrote the ALL recipe to allow for faster parallel make * tabs to spaces * Renamed custom event functions to be 'startup_user' and 'shutdown_user'. Also moved the prototypes around. * Tweaked pvc atomic layout to work with the pvc planck. * updates midi scale calling
2016-05-23Optimize matrix scanning (#343)Eric Tang
2016-05-20adds petereichinger's planck keymap (#340)Peter
* Add custom keymap * A little readme and remove old layout comments
2016-05-19Merge pull request #324 from Bubblepoint/masterErez Zukerman
Add adnw/k_o_y layout
2016-05-18adapts unicode to quantum.c (#333)Jack Humbert
* Unicode to have unicode input you need to: - set your OS input method to UNICODE if needed - enable unicode in your makefile - copy the action_function from keyboard/planck/keymaps/unicode/unicode.c to your keymap.c set the target OS method in your keymap.c: void matrix_init_user() { set_unicode_mode(UC_OSX); } you can then switch when you want with: set_unicode_mode(UC_OSX); set_unicode_mode(UC_LNX); set_unicode_mode(UC_WIN); put some unicode codes in your keymap like so: UC(0x0061) I did change the bit mask in quantum/keymap_common.c and .h I’m afraid we will need uint32 to get a total support for all unicode tables or relocate the handler as @mbarkhau did. * rearranges keycode values, hooks-up unicode * removes extra lalt ref * adds unicode shortcuts and example
2016-05-18adds music and audio toggles (#337)Jack Humbert
* Updated personal layouts * tweaked personal * Nightly - Audio Cleanup Refactored the LUTs. Abstracted some of the registers out of audio to use more functional names. Split audio into audio and audio_pwm. WIP * nightly - collapsed code * Added check for note playing to LEDs * Usability tweaks * TWEAE * nightly added extra kcs to keymap common * turned on Plank audio * Added backlight breathing to atomic * reverted accidental merge * Added music and audio toggles to Quantum.c * Redid the audio callbacks * music/audio_on_user
2016-05-17adds KC_NUBS, KC_NUHS and shifted versions to default keymapsJack Humbert