summaryrefslogtreecommitdiff
path: root/ps2_usb
diff options
context:
space:
mode:
Diffstat (limited to 'ps2_usb')
-rw-r--r--ps2_usb/Makefile58
-rw-r--r--ps2_usb/Makefile.pjrc_usart58
-rw-r--r--ps2_usb/Makefile.vusb92
-rw-r--r--ps2_usb/README116
-rw-r--r--ps2_usb/README.vusb37
-rw-r--r--ps2_usb/config_pjrc.h59
-rw-r--r--ps2_usb/config_pjrc_usart.h91
-rw-r--r--ps2_usb/config_vusb.h133
-rw-r--r--ps2_usb/keymap.c379
-rw-r--r--ps2_usb/led.c33
-rw-r--r--ps2_usb/matrix.c452
-rw-r--r--ps2_usb/usbconfig.h378
12 files changed, 0 insertions, 1886 deletions
diff --git a/ps2_usb/Makefile b/ps2_usb/Makefile
deleted file mode 100644
index 515e6899f..000000000
--- a/ps2_usb/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
-# Target file name (without extension).
-TARGET = ps2_usb_pjrc
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c \
- ps2.c
-
-CONFIG_H = config_pjrc.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# *Comment out* to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/ps2_usb/Makefile.pjrc_usart b/ps2_usb/Makefile.pjrc_usart
deleted file mode 100644
index 2e570e710..000000000
--- a/ps2_usb/Makefile.pjrc_usart
+++ /dev/null
@@ -1,58 +0,0 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
-# Target file name (without extension).
-TARGET = ps2_usb_pjrc_usart
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c \
- ps2_usart.c
-
-CONFIG_H = config_pjrc_usart.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# *Comment out* to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/ps2_usb/Makefile.vusb b/ps2_usb/Makefile.vusb
deleted file mode 100644
index d85f1d55d..000000000
--- a/ps2_usb/Makefile.vusb
+++ /dev/null
@@ -1,92 +0,0 @@
-#
-# Makefile for V-USB
-#
-
-
-# Target file name (without extension).
-TARGET = ps2_usb_vusb
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c \
- ps2_usart.c
-
-CONFIG_H = config_vusb.h
-
-
-# V-USB debug level: To use ps2_usart.c level must be 0
-# ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-#MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-MCU = atmega168
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 20000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-NO_UART = yes # UART is unavailable
-
-
-
-#---------------- Programming Options --------------------------
-AVRDUDE = avrdude
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = usbasp
-AVRDUDE_PORT =
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-
-include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/ps2_usb/README b/ps2_usb/README
deleted file mode 100644
index c10393e5e..000000000
--- a/ps2_usb/README
+++ /dev/null
@@ -1,116 +0,0 @@
-PS/2 to USB keyboard converter
-==============================
-This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2.
-This will works on USB AVR(ATMega32U4, AT90USB) or V-USB.
-
-
-Features
---------
-Mouse keys
- You can emulates mouse move and button click using keyboard.
-System/Media control
- You can sends Power event, Volume down/up and Mute.
-USB NKRO(actually 120KRO+8Modifiers)
- You can tolggles NKRO feature.
-Keymap customization
- You can customize keymaps easily by editing source code. See keymap.c.
-
-
-PS/2 signal handling implementations
-------------------------------------
-Following three methods are used to implement PS/2 signal handling.
-a. Simple and stupid wait & read loop(intensive use of cycles)
- This is implemented with (expected) portable C code for reference. See ps2.c.
-b. Interrupt driven
- See ps2_intr.c
-c. Using USART hardware module(no cycle needed)
- This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter.
- See ps2_usart.c.
-
-
-Build Converter
----------------
-Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock).
-For a. Simple and stupid and b. Interrupt implementaion:
- By default Clock is on PF0 and Data on PF1.
- You can change this pin configuration by editing config_pjrc.h.
- In this photo Vcc is yellow, GND is green, Data is red and Clock is black.
- http://img17.imageshack.us/img17/7243/201101181933.jpg
-For c. USART implementation:
- In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2.
-
-
-Build Frimware
---------------
-1. Edit Makefile for build options and MCU setting.
- Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
-2. make
- Just type 'make' in a terminal.
- Use '-f Makefile.pjrc_intr' option to use b. Interrupt.
- Use '-f Makefile.pjrc_usart' option to use c. USART.
- Use '-f Makefile.vusb' option to build V-USB converter.
-3. program with Teensy Loader.
- http://www.pjrc.com/teensy/loader.html
-
-
-Demonstration of Features
--------------------------
-In default configuration, you can try several keymaps, mousekeys and USB NKRO.
-Use following magic key combinations to enable some features.
-
-keymaps and NKRO:
- Magic+0: Qwerty with mousekeys(default)
- Magic+1: Qwerty without mousekeys
- Magic+2: Colemak
- Magic+3: Dvorak
- Magic+4: Workman
- Magic+N: toggles NKRO/6KRO(6KRO by default)
- Magic+Esc: sends Power Event(Power button)
-
- where Magic=(LShift+RShift) or (LControl+RShift)
-
-Fn layer function:
- Fn0+(hjkl): Mousekey move(vi cursor like)
- Fn0+(yuio): Mouse wheel(left,down,up,right)
- Fn0+space: Mouse left button
- Fn0+(mnb): Mouse buttons(m=left, n=right, b=middle)
- Fn0+(zxc): Media control(Volup, Voldown, Mute)
- Fn1+(hjkl): Cursor move(vi cursor like)
- Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End)
-
- where Fn0=;, Fn1=/
-
-
-Keymap
-------
-You can change a keymap by editing code of keymap.c like following.
-How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h.
-To define keymap layer switching may needs a bit of your effort at this time.
-
- /* Default Layer: plain keymap
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
- * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
- * |-----------------------------------------------------------| `-----------' |-----------| +|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
-
-EOF
diff --git a/ps2_usb/README.vusb b/ps2_usb/README.vusb
deleted file mode 100644
index c92871bcd..000000000
--- a/ps2_usb/README.vusb
+++ /dev/null
@@ -1,37 +0,0 @@
-V-USB Support
-=============
-You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
-The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
-
-To build a firmware use Makefile.vusb instead of Makefile.
-
-
-Circuit
--------
- +---+ +---------------+
-USB GND | | ATmega168 |
-=== C3 | |
-5V <-------+--------+---|Vcc,AVCC | PS/2
- R1 | | ====
-D- <----+--+-----R2-----|INT1 RXD|------->DATA
-D+ <----|---+----R3-----|INT0 XCK|------->CLOCK
- Z1 Z2 | | ->5V
-GND<----+---+--+--+-----|GND | ->GND
- | | | |
- | C2-+--|XTAL1 |
- | X1 | |
- +--C3-+--|XTAL2 |
- +---------------+
-R1: 1.5K Ohm
-R2,R3: 68 Ohm
-Z1,Z2: Zenner 3.6V
-C1,C2: 22pF
-C3: 0.1uF
-X1: Crystal 20MHz(16MHz/12MHz)
-
-
-This is my V-USB converter on breadboard.
-[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG]
-
-
-EOF
diff --git a/ps2_usb/config_pjrc.h b/ps2_usb/config_pjrc.h
deleted file mode 100644
index 883ffab27..000000000
--- a/ps2_usb/config_pjrc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6512
-#define MANUFACTURER t.m.k.
-#define PRODUCT PS/2 keyboard converter
-#define DESCRIPTION convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
- keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT PORTF
-#define PS2_CLOCK_PIN PINF
-#define PS2_CLOCK_DDR DDRF
-#define PS2_CLOCK_BIT 0
-#define PS2_DATA_PORT PORTF
-#define PS2_DATA_PIN PINF
-#define PS2_DATA_DDR DDRF
-#define PS2_DATA_BIT 1
-
-#endif
diff --git a/ps2_usb/config_pjrc_usart.h b/ps2_usb/config_pjrc_usart.h
deleted file mode 100644
index 83ddbf770..000000000
--- a/ps2_usb/config_pjrc_usart.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6513
-#define MANUFACTURER t.m.k.
-#define PRODUCT PS/2 keyboard converter(USART)
-#define DESCRIPTION convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
- keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 5
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 2
-
-
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
-#define PS2_USART_INIT() do { \
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
- UCSR1C = ((1 << UMSEL10) | \
- (3 << UPM10) | \
- (0 << USBS1) | \
- (3 << UCSZ10) | \
- (0 << UCPOL1)); \
- UCSR1A = 0; \
- UBRR1H = 0; \
- UBRR1L = 0; \
-} while (0)
-#define PS2_USART_RX_INT_ON() do { \
- UCSR1B = ((1 << RXCIE1) | \
- (1 << RXEN1)); \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
- UCSR1B = (1 << RXEN1); \
-} while (0)
-#define PS2_USART_OFF() do { \
- UCSR1C = 0; \
- UCSR1B &= ~((1 << RXEN1) | \
- (1 << TXEN1)); \
-} while (0)
-#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
-#define PS2_USART_RX_DATA UDR1
-#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-#define PS2_USART_RX_VECT USART1_RX_vect
-
-#endif
diff --git a/ps2_usb/config_vusb.h b/ps2_usb/config_vusb.h
deleted file mode 100644
index afd2f7911..000000000
--- a/ps2_usb/config_vusb.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x2233
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER t.m.k.
-#define PRODUCT PS/2 keyboard converter
-#define DESCRIPTION convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
- keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 4
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-
-
-// Synchronous USART is used to receive data from keyboard.
-// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
-// NOTE: This is recomended strongly if you use V-USB library.
-#define PS2_USE_USART
-
-// External or Pin Change Interrupt is used to receive data from keyboard.
-// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
-//#define PS2_USE_INT
-
-
-#ifdef PS2_USE_USART
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
-#define PS2_USART_INIT() do { \
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
- UCSR0C = ((1 << UMSEL00) | \
- (3 << UPM00) | \
- (0 << USBS0) | \
- (3 << UCSZ00) | \
- (0 << UCPOL0)); \
- UCSR0A = 0; \
- UBRR0H = 0; \
- UBRR0L = 0; \
-} while (0)
-#define PS2_USART_RX_INT_ON() do { \
- UCSR0B = ((1 << RXCIE0) | \
- (1 << RXEN0)); \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
- UCSR0B = (1 << RXEN0); \
-} while (0)
-#define PS2_USART_OFF() do { \
- UCSR0C = 0; \
- UCSR0B &= ~((1 << RXEN0) | \
- (1 << TXEN0)); \
-} while (0)
-#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
-#define PS2_USART_RX_DATA UDR0
-#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
-#define PS2_USART_RX_VECT USART_RX_vect
-#endif
-
-
-#ifdef PS2_USE_INT
-/* INT1
-#define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
-} while (0)
-#define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
-} while (0)
-#define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
-} while (0)
-#define PS2_INT_VECT INT1_vect
-*/
-
-/* PCINT20 */
-#define PS2_INT_INIT() do { \
- PCICR |= (1<<PCIE2); \
-} while (0)
-#define PS2_INT_ON() do { \
- PCMSK2 |= (1<<PCINT20); \
-} while (0)
-#define PS2_INT_OFF() do { \
- PCMSK2 &= ~(1<<PCINT20); \
- PCICR &= ~(1<<PCIE2); \
-} while (0)
-#define PS2_INT_VECT PCINT2_vect
-#endif
-
-#endif
diff --git a/ps2_usb/keymap.c b/ps2_usb/keymap.c
deleted file mode 100644
index f1e34a929..000000000
--- a/ps2_usb/keymap.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Keymap for PS/2 keyboard
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "usb_keycodes.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-// Following macros help you to define a keymap with the form of actual keyboard layout.
-
-/* US layout plus all other various keys */
-#define KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- K61, /* for European ISO */ \
- K51, K13, K6A, K64, K67, /* for Japanese JIS */ \
- K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \
- KB7, KBF, KDE, /* System Power, Sleep, Wake */ \
- KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \
- KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \
- KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \
- K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \
- KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \
-) { \
- { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
- { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \
- { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \
- { KB_##K18, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \
- { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \
- { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \
- { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \
- { KB_##K38, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \
- { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \
- { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \
- { KB_##K50, KB_##K51, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_##K57 }, \
- { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_##K5F }, \
- { KB_NO, KB_##K61, KB_NO, KB_NO, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \
- { KB_NO, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \
- { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
- { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \
- { KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \
- { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
- { KB_##K90, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_##K95, KB_NO, KB_NO }, \
- { KB_##K98, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \
- { KB_##KA0, KB_##KA1, KB_NO, KB_##KA3, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \
- { KB_##KA8, KB_NO, KB_NO, KB_##KAB, KB_NO, KB_NO, KB_NO, KB_##KAF }, \
- { KB_##KB0, KB_NO, KB_##KB2, KB_NO, KB_##KB4, KB_NO, KB_NO, KB_##KB7 }, \
- { KB_##KB8, KB_NO, KB_##KBA, KB_##KBB, KB_NO, KB_NO, KB_NO, KB_##KBF }, \
- { KB_##KC0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
- { KB_##KC8, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_##KCD, KB_NO, KB_NO }, \
- { KB_##KD0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
- { KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \
- { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
- { KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \
- { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \
- { KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \
-}
-
-/* US layout */
-#define KEYMAP( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
-) \
-KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- NUBS, \
- RO, KANA, JYEN, HENK, MHEN, \
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
- SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
- AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
- MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
- MAIL, CALCULATOR, MY_COMPUTER, \
- WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
- WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
-)
-
-/* ISO layout */
-#define KEYMAP_ISO( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A, K6B,K73,K74,K79, \
- K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
-) \
-KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- K61, \
- RO, KANA, JYEN, HENK, MHEN, \
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
- SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
- AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
- MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
- MAIL, CALCULATOR, MY_COMPUTER, \
- WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
- WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
-)
-
-/* JIS layout */
-#define KEYMAP_JIS( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
-) \
-KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- NUBS, \
- K51, K13, K6A, K64, K67, \
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
- SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
- AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
- MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
- MAIL, CALCULATOR, MY_COMPUTER, \
- WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
- WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
-)
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 5, // Fn0
- 6, // Fn1
- 0, // Fn2
- 0, // Fn3
- 0, // Fn4
- 0, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KB_SCLN, // Fn0
- KB_SLSH, // Fn1
- KB_NO, // Fn2
- KB_NO, // Fn3
- KB_NO, // Fn4
- KB_NO, // Fn5
- KB_NO, // Fn6
- KB_NO // Fn7
-};
-
-
-// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode.
-// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro.
-// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS.
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: default
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
- * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
- * |-----------------------------------------------------------| `-----------' |-----------| +|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- * ; = Fn0(to Layer 5)
- * / = Fn1(to Layer 6)
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 1: plain Qwerty without layer switching
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 2: Colemak http://colemak.com
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \|
- * |-----------------------------------------------------------|
- * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \|
- * |-----------------------------------------------------------|
- * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return |
- * |-----------------------------------------------------------|
- * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS,
- LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \|
- * |-----------------------------------------------------------|
- * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 5: Mouse keys
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
- * |-----------------------------------------------------------|
- * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \|
- * |-----------------------------------------------------------|
- * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return |
- * |-----------------------------------------------------------|
- * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
- * Vo = Volume, Mut = Mute
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS,
- LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 6: Cursor keys
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
- * |-----------------------------------------------------------|
- * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \|
- * |-----------------------------------------------------------|
- * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
- LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_layer[biton(fn_bits)]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
-}
diff --git a/ps2_usb/led.c b/ps2_usb/led.c
deleted file mode 100644
index e448e84ec..000000000
--- a/ps2_usb/led.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "ps2.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
- uint8_t ps2_led = 0;
- if (usb_led & (1<<USB_LED_SCROLL_LOCK))
- ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- ps2_led |= (1<<PS2_LED_NUM_LOCK);
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- ps2_led |= (1<<PS2_LED_CAPS_LOCK);
- ps2_host_set_led(ps2_led);
-}
diff --git a/ps2_usb/matrix.c b/ps2_usb/matrix.c
deleted file mode 100644
index 4187ea060..000000000
--- a/ps2_usb/matrix.c
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "debug.h"
-#include "ps2.h"
-#include "matrix.h"
-
-
-static void matrix_make(uint8_t code);
-static void matrix_break(uint8_t code);
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-
-
-/*
- * Matrix Array usage:
- * 'Scan Code Set 2' is assigned into 256(32x8)cell matrix.
- * Hmm, it is very sparse and not efficient :(
- *
- * Notes:
- * Both 'Hanguel/English'(F1) and 'Hanja'(F2) collide with 'Delete'(E0 71) and 'Down'(E0 72).
- * These two Korean keys need exceptional handling and are not supported for now. Sorry.
- *
- * 8bit wide
- * +---------+
- * 0| |
- * :| XX | 00-7F for normal codes(without E0-prefix)
- * f|_________|
- * 10| |
- * :| E0 YY | 80-FF for E0-prefixed codes
- * 1f| | (<YY>|0x80) is used as matrix position.
- * +---------+
- *
- * Exceptions:
- * 0x83: F7(0x83) This is a normal code but beyond 0x7F.
- * 0xFC: PrintScreen
- * 0xFE: Pause
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code) (code>>3)
-#define COL(code) (code&0x07)
-
-// matrix positions for exceptional keys
-#define F7 (0x83)
-#define PRINT_SCREEN (0xFC)
-#define PAUSE (0xFE)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- ps2_host_init();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
- return;
-}
-
-/*
- * PS/2 Scan Code Set 2: Exceptional Handling
- *
- * There are several keys to be handled exceptionally.
- * The scan code for these keys are varied or prefix/postfix'd
- * depending on modifier key state.
- *
- * Keyboard Scan Code Specification:
- * http://www.microsoft.com/whdc/archive/scancode.mspx
- * http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc
- *
- *
- * 1) Insert, Delete, Home, End, PageUp, PageDown, Up, Down, Right, Left
- * a) when Num Lock is off
- * modifiers | make | break
- * ----------+---------------------------+----------------------
- * Ohter | <make> | <break>
- * LShift | E0 F0 12 <make> | <break> E0 12
- * RShift | E0 F0 59 <make> | <break> E0 59
- * L+RShift | E0 F0 12 E0 F0 59 <make> | <break> E0 59 E0 12
- *
- * b) when Num Lock is on
- * modifiers | make | break
- * ----------+---------------------------+----------------------
- * Other | E0 12 <make> | <break> E0 F0 12
- * Shift'd | <make> | <break>
- *
- * Handling: These prefix/postfix codes are ignored.
- *
- *
- * 2) Keypad /
- * modifiers | make | break
- * ----------+---------------------------+----------------------
- * Ohter | <make> | <break>
- * LShift | E0 F0 12 <make> | <break> E0 12
- * RShift | E0 F0 59 <make> | <break> E0 59
- * L+RShift | E0 F0 12 E0 F0 59 <make> | <break> E0 59 E0 12
- *
- * Handling: These prefix/postfix codes are ignored.
- *
- *
- * 3) PrintScreen
- * modifiers | make | break
- * ----------+--------------+-----------------------------------
- * Other | E0 12 E0 7C | E0 F0 7C E0 F0 12
- * Shift'd | E0 7C | E0 F0 7C
- * Control'd | E0 7C | E0 F0 7C
- * Alt'd | 84 | F0 84
- *
- * Handling: These prefix/postfix codes are ignored, and both scan codes
- * 'E0 7C' and 84 are seen as PrintScreen.
- *
- * 4) Pause
- * modifiers | make(no break code)
- * ----------+--------------------------------------------------
- * Other | E1 14 77 E1 F0 14 F0 77
- * Control'd | E0 7E E0 F0 7E
- *
- * Handling: Both code sequences are treated as a whole.
- * And we need a ad hoc 'pseudo break code' hack to get the key off
- * because it has no break code.
- *
- */
-uint8_t matrix_scan(void)
-{
-
- // scan code reading states
- static enum {
- INIT,
- F0,
- E0,
- E0_F0,
- // Pause
- E1,
- E1_14,
- E1_14_77,
- E1_14_77_E1,
- E1_14_77_E1_F0,
- E1_14_77_E1_F0_14,
- E1_14_77_E1_F0_14_F0,
- // Control'd Pause
- E0_7E,
- E0_7E_E0,
- E0_7E_E0_F0,
- } state = INIT;
-
-
- is_modified = false;
-
- // 'pseudo break code' hack
- if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) {
- matrix_break(PAUSE);
- }
-
- uint8_t code;
- while ((code = ps2_host_recv())) {
- switch (state) {
- case INIT:
- switch (code) {
- case 0xE0:
- state = E0;
- break;
- case 0xF0:
- state = F0;
- break;
- case 0xE1:
- state = E1;
- break;
- case 0x83: // F7
- matrix_make(F7);
- state = INIT;
- break;
- case 0x84: // Alt'd PrintScreen
- matrix_make(PRINT_SCREEN);
- state = INIT;
- break;
- default: // normal key make
- if (code < 0x80) {
- matrix_make(code);
- } else {
- debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
- }
- state = INIT;
- }
- break;
- case E0: // E0-Prefixed
- switch (code) {
- case 0x12: // to be ignored
- case 0x59: // to be ignored
- state = INIT;
- break;
- case 0x7E: // Control'd Pause
- state = E0_7E;
- break;
- case 0xF0:
- state = E0_F0;
- break;
- default:
- if (code < 0x80) {
- matrix_make(code|0x80);
- } else {
- debug("unexpected scan code at E0: "); debug_hex(code); debug("\n");
- }
- state = INIT;
- }
- break;
- case F0: // Break code
- switch (code) {
- case 0x83: // F7
- matrix_break(F7);
- state = INIT;
- break;
- case 0x84: // Alt'd PrintScreen
- matrix_break(PRINT_SCREEN);
- state = INIT;
- break;
- default:
- if (code < 0x80) {
- matrix_break(code);
- } else {
- debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
- }
- state = INIT;
- }
- break;
- case E0_F0: // Break code of E0-prefixed
- switch (code) {
- case 0x12: // to be ignored
- case 0x59: // to be ignored
- state = INIT;
- break;
- default:
- if (code < 0x80) {
- matrix_break(code|0x80);
- } else {
- debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n");
- }
- state = INIT;
- }
- break;
- // following are states of Pause
- case E1:
- switch (code) {
- case 0x14:
- state = E1_14;
- break;
- default:
- state = INIT;
- }
- break;
- case E1_14:
- switch (code) {
- case 0x77:
- state = E1_14_77;
- break;
- default:
- state = INIT;
- }
- break;
- case E1_14_77:
- switch (code) {
- case 0xE1:
- state = E1_14_77_E1;
- break;
- default:
- state = INIT;
- }
- break;
- case E1_14_77_E1:
- switch (code) {
- case 0xF0:
- state = E1_14_77_E1_F0;
- break;
- default:
- state = INIT;
- }
- break;
- case E1_14_77_E1_F0:
- switch (code) {
- case 0x14:
- state = E1_14_77_E1_F0_14;
- break;
- default:
- state = INIT;
- }
- break;
- case E1_14_77_E1_F0_14:
- switch (code) {
- case 0xF0:
- state = E1_14_77_E1_F0_14_F0;
- break;
- default:
- state = INIT;
- }
- break;
- case E1_14_77_E1_F0_14_F0:
- switch (code) {
- case 0x77:
- matrix_make(PAUSE);
- state = INIT;
- break;
- default:
- state = INIT;
- }
- break;
- // Following are states of Control'd Pause
- case E0_7E:
- if (code == 0xE0)
- state = E0_7E_E0;
- else
- state = INIT;
- break;
- case E0_7E_E0:
- if (code == 0xF0)
- state = E0_7E_E0_F0;
- else
- state = INIT;
- break;
- case E0_7E_E0_F0:
- if (code == 0x7E)
- matrix_make(PAUSE);
- state = INIT;
- break;
- default:
- state = INIT;
- }
- phex(code);
- }
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix_has_ghost_in_row(i))
- return true;
- }
-#endif
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
- pbin_reverse(matrix_get_row(row));
-#ifdef MATRIX_HAS_GHOST
- if (matrix_has_ghost_in_row(row)) {
- print(" <ghost");
- }
-#endif
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop(matrix[i]);
- }
- return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
- // no ghost exists in case less than 2 keys on
- if (((matrix[row] - 1) & matrix[row]) == 0)
- return false;
-
- // ghost exists in case same state as other row
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- if (i != row && (matrix[i] & matrix[row]) == matrix[row])
- return true;
- }
- return false;
-}
-#endif
-
-
-inline
-static void matrix_make(uint8_t code)
-{
- if (!matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] |= 1<<COL(code);
- is_modified = true;
- }
-}
-
-inline
-static void matrix_break(uint8_t code)
-{
- if (matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] &= ~(1<<COL(code));
- is_modified = true;
- }
-}
diff --git a/ps2_usb/usbconfig.h b/ps2_usb/usbconfig.h
deleted file mode 100644
index 9038f1eb8..000000000
--- a/ps2_usb/usbconfig.h
+++ /dev/null
@@ -1,378 +0,0 @@
-/* Name: usbconfig.h
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2005-04-01
- * Tabsize: 4
- * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
- */
-
-#ifndef __usbconfig_h_included__
-#define __usbconfig_h_included__
-
-#include "config_vusb.h"
-
-/*
-General Description:
-This file is an example configuration (with inline documentation) for the USB
-driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
-also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
-wire the lines to any other port, as long as D+ is also wired to INT0 (or any
-other hardware interrupt, as long as it is the highest level interrupt, see
-section at the end of this file).
-*/
-
-/* ---------------------------- Hardware Config ---------------------------- */
-
-#define USB_CFG_IOPORTNAME D
-/* This is the port where the USB bus is connected. When you configure it to
- * "B", the registers PORTB, PINB and DDRB will be used.
- */
-#define USB_CFG_DMINUS_BIT 3
-/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
- * This may be any bit in the port.
- */
-#define USB_CFG_DPLUS_BIT 2
-/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
- * This may be any bit in the port. Please note that D+ must also be connected
- * to interrupt pin INT0! [You can also use other interrupts, see section
- * "Optional MCU Description" below, or you can connect D- to the interrupt, as
- * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
- * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
- * markers every millisecond.]
- */
-#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
-/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
- * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
- * require no crystal, they tolerate +/- 1% deviation from the nominal
- * frequency. All other rates require a precision of 2000 ppm and thus a
- * crystal!
- * Since F_CPU should be defined to your actual clock rate anyway, you should
- * not need to modify this setting.
- */
-#define USB_CFG_CHECK_CRC 0
-/* Define this to 1 if you want that the driver checks integrity of incoming
- * data packets (CRC checks). CRC checks cost quite a bit of code size and are
- * currently only available for 18 MHz crystal clock. You must choose
- * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
- */
-
-/* ----------------------- Optional Hardware Config ------------------------ */
-
-/* #define USB_CFG_PULLUP_IOPORTNAME D */
-/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
- * V+, you can connect and disconnect the device from firmware by calling
- * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
- * This constant defines the port on which the pullup resistor is connected.
- */
-/* #define USB_CFG_PULLUP_BIT 4 */
-/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
- * above) where the 1.5k pullup resistor is connected. See description
- * above for details.
- */
-
-/* --------------------------- Functional Range ---------------------------- */
-
-#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
-/* Define this to 1 if you want to compile a version with two endpoints: The
- * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
- * number).
- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
-/* Define this to 1 if you want to compile a version with three endpoints: The
- * default control endpoint 0, an interrupt-in endpoint 3 (or the number
- * configured below) and a catch-all default interrupt-in endpoint as above.
- * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
- */
-#define USB_CFG_EP3_NUMBER 3
-/* If the so-called endpoint 3 is used, it can now be configured to any other
- * endpoint number (except 0) with this macro. Default if undefined is 3.
- */
-/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
-/* The above macro defines the startup condition for data toggling on the
- * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
- * Since the token is toggled BEFORE sending any data, the first packet is
- * sent with the oposite value of this configuration!
- */
-#define USB_CFG_IMPLEMENT_HALT 0
-/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
- * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
- * it is required by the standard. We have made it a config option because it
- * bloats the code considerably.
- */
-#define USB_CFG_SUPPRESS_INTR_CODE 0
-/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
- * want to send any data over them. If this macro is defined to 1, functions
- * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
- * you need the interrupt-in endpoints in order to comply to an interface
- * (e.g. HID), but never want to send any data. This option saves a couple
- * of bytes in flash memory and the transmit buffers in RAM.
- */
-#define USB_CFG_INTR_POLL_INTERVAL 10
-/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
- * interval. The value is in milliseconds and must not be less than 10 ms for
- * low speed devices.
- */
-#define USB_CFG_IS_SELF_POWERED 0
-/* Define this to 1 if the device has its own power supply. Set it to 0 if the
- * device is powered from the USB bus.
- */
-#define USB_CFG_MAX_BUS_POWER 100
-/* Set this variable to the maximum USB bus power consumption of your device.
- * The value is in milliamperes. [It will be divided by two since USB
- * communicates power requirements in units of 2 mA.]
- */
-#define USB_CFG_IMPLEMENT_FN_WRITE 1
-/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
- * transfers. Set it to 0 if you don't need it and want to save a couple of
- * bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_READ 0
-/* Set this to 1 if you need to send control replies which are generated
- * "on the fly" when usbFunctionRead() is called. If you only want to send
- * data from a static buffer, set it to 0 and return the data from
- * usbFunctionSetup(). This saves a couple of bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
-/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
- * You must implement the function usbFunctionWriteOut() which receives all
- * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
- * can be found in 'usbRxToken'.
- */
-#define USB_CFG_HAVE_FLOWCONTROL 0
-/* Define this to 1 if you want flowcontrol over USB data. See the definition
- * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
- * usbdrv.h.
- */
-#define USB_CFG_DRIVER_FLASH_PAGE 0
-/* If the device has more than 64 kBytes of flash, define this to the 64 k page
- * where the driver's constants (descriptors) are located. Or in other words:
- * Define this to 1 for boot loaders on the ATMega128.
- */
-#define USB_CFG_LONG_TRANSFERS 0
-/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
- * in a single control-in or control-out transfer. Note that the capability
- * for long transfers increases the driver size.
- */
-/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
-/* This macro is a hook if you want to do unconventional things. If it is
- * defined, it's inserted at the beginning of received message processing.
- * If you eat the received message and don't want default processing to
- * proceed, do a return after doing your things. One possible application
- * (besides debugging) is to flash a status LED on each packet.
- */
-/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
-/* This macro is a hook if you need to know when an USB RESET occurs. It has
- * one parameter which distinguishes between the start of RESET state and its
- * end.
- */
-/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
-/* This macro (if defined) is executed when a USB SET_ADDRESS request was
- * received.
- */
-#define USB_COUNT_SOF 0
-/* define this macro to 1 if you need the global variable "usbSofCount" which
- * counts SOF packets. This feature requires that the hardware interrupt is
- * connected to D- instead of D+.
- */
-/* #ifdef __ASSEMBLER__
- * macro myAssemblerMacro
- * in YL, TCNT0
- * sts timer0Snapshot, YL
- * endm
- * #endif
- * #define USB_SOF_HOOK myAssemblerMacro
- * This macro (if defined) is executed in the assembler module when a
- * Start Of Frame condition is detected. It is recommended to define it to
- * the name of an assembler macro which is defined here as well so that more
- * than one assembler instruction can be used. The macro may use the register
- * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
- * immediately after an SOF pulse may be lost and must be retried by the host.
- * What can you do with this hook? Since the SOF signal occurs exactly every
- * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
- * designs running on the internal RC oscillator.
- * Please note that Start Of Frame detection works only if D- is wired to the
- * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
- */
-#define USB_CFG_CHECK_DATA_TOGGLING 0
-/* define this macro to 1 if you want to filter out duplicate data packets
- * sent by the host. Duplicates occur only as a consequence of communication
- * errors, when the host does not receive an ACK. Please note that you need to
- * implement the filtering yourself in usbFunctionWriteOut() and
- * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
- * for each control- and out-endpoint to check for duplicate packets.
- */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
-/* define this macro to 1 if you want the function usbMeasureFrameLength()
- * compiled in. This function can be used to calibrate the AVR's RC oscillator.
- */
-#define USB_USE_FAST_CRC 0
-/* The assembler module has two implementations for the CRC algorithm. One is
- * faster, the other is smaller. This CRC routine is only used for transmitted
- * messages where timing is not critical. The faster routine needs 31 cycles
- * per byte while the smaller one needs 61 to 69 cycles. The faster routine
- * may be worth the 32 bytes bigger code size if you transmit lots of data and
- * run the AVR close to its limit.
- */
-
-/* -------------------------- Device Description --------------------------- */
-
-#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
-/* USB vendor ID for the device, low byte first. If you have registered your
- * own Vendor ID, define it here. Otherwise you may use one of obdev's free
- * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
-/* This is the ID of the product, low byte first. It is interpreted in the
- * scope of the vendor ID. If you have registered your own VID with usb.org
- * or if you have licensed a PID from somebody else, define it here. Otherwise
- * you may use one of obdev's free shared VID/PID pairs. See the file
- * USB-IDs-for-free.txt for details!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_VERSION 0x00, 0x01
-/* Version number of the device: Minor number first, then major number.
- */
-#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.'
-#define USB_CFG_VENDOR_NAME_LEN 6
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
-#define USB_CFG_DEVICE_NAME_LEN 23
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
-#define USB_CFG_DEVICE_CLASS 0
-#define USB_CFG_DEVICE_SUBCLASS 0
-/* See USB specification if you want to conform to an existing device class.
- * Class 0xff is "vendor specific".
- */
-#define USB_CFG_INTERFACE_CLASS 3 /* HID */
-#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
-#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
-/* See USB specification if you want to conform to an existing device class or
- * protocol. The following classes must be set at interface level:
- * HID class is 3, no subclass and protocol required (but may be useful!)
- * CDC class is 2, use subclass 2 and protocol 1 for ACM
- */
-#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
-/* Define this to the length of the HID report descriptor, if you implement
- * an HID device. Otherwise don't define it or define it to 0.
- * If you use this define, you must add a PROGMEM character array named
- * "usbHidReportDescriptor" to your code which contains the report descriptor.
- * Don't forget to keep the array and this define in sync!
- */
-
-/* #define USB_PUBLIC static */
-/* Use the define above if you #include usbdrv.c instead of linking against it.
- * This technique saves a couple of bytes in flash memory.
- */
-
-/* ------------------- Fine Control over USB Descriptors ------------------- */
-/* If you don't want to use the driver's default USB descriptors, you can
- * provide our own. These can be provided as (1) fixed length static data in
- * flash memory, (2) fixed length static data in RAM or (3) dynamically at
- * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
- * information about this function.
- * Descriptor handling is configured through the descriptor's properties. If
- * no properties are defined or if they are 0, the default descriptor is used.
- * Possible properties are:
- * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
- * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
- * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
- * you want RAM pointers.
- * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
- * in static memory is in RAM, not in flash memory.
- * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
- * the driver must know the descriptor's length. The descriptor itself is
- * found at the address of a well known identifier (see below).
- * List of static descriptor names (must be declared PROGMEM if in flash):
- * char usbDescriptorDevice[];
- * char usbDescriptorConfiguration[];
- * char usbDescriptorHidReport[];
- * char usbDescriptorString0[];
- * int usbDescriptorStringVendor[];
- * int usbDescriptorStringDevice[];
- * int usbDescriptorStringSerialNumber[];
- * Other descriptors can't be provided statically, they must be provided
- * dynamically at runtime.
- *
- * Descriptor properties are or-ed or added together, e.g.:
- * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
- *
- * The following descriptors are defined:
- * USB_CFG_DESCR_PROPS_DEVICE
- * USB_CFG_DESCR_PROPS_CONFIGURATION
- * USB_CFG_DESCR_PROPS_STRINGS
- * USB_CFG_DESCR_PROPS_STRING_0
- * USB_CFG_DESCR_PROPS_STRING_VENDOR
- * USB_CFG_DESCR_PROPS_STRING_PRODUCT
- * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
- * USB_CFG_DESCR_PROPS_HID
- * USB_CFG_DESCR_PROPS_HID_REPORT
- * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
- *
- * Note about string descriptors: String descriptors are not just strings, they
- * are Unicode strings prefixed with a 2 byte header. Example:
- * int serialNumberDescriptor[] = {
- * USB_STRING_DESCRIPTOR_HEADER(6),
- * 'S', 'e', 'r', 'i', 'a', 'l'
- * };
- */
-
-#define USB_CFG_DESCR_PROPS_DEVICE 0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
-//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
-#define USB_CFG_DESCR_PROPS_HID 0
-#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
-#define USB_CFG_DESCR_PROPS_UNKNOWN 0
-
-/* ----------------------- Optional MCU Description ------------------------ */
-
-/* The following configurations have working defaults in usbdrv.h. You
- * usually don't need to set them explicitly. Only if you want to run
- * the driver on a device which is not yet supported or with a compiler
- * which is not fully supported (such as IAR C) or if you use a differnt
- * interrupt than INT0, you may have to define some of these.
- */
-/* #define USB_INTR_CFG MCUCR */
-/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
-/* #define USB_INTR_CFG_CLR 0 */
-/* #define USB_INTR_ENABLE GIMSK */
-/* #define USB_INTR_ENABLE_BIT INT0 */
-/* #define USB_INTR_PENDING GIFR */
-/* #define USB_INTR_PENDING_BIT INTF0 */
-/* #define USB_INTR_VECTOR INT0_vect */
-
-#endif /* __usbconfig_h_included__ */