summaryrefslogtreecommitdiff
path: root/protocol/vusb/usbdrv/usbdrvasm15.inc
diff options
context:
space:
mode:
Diffstat (limited to 'protocol/vusb/usbdrv/usbdrvasm15.inc')
-rw-r--r--protocol/vusb/usbdrv/usbdrvasm15.inc423
1 files changed, 0 insertions, 423 deletions
diff --git a/protocol/vusb/usbdrv/usbdrvasm15.inc b/protocol/vusb/usbdrv/usbdrvasm15.inc
deleted file mode 100644
index 401b7f8ff..000000000
--- a/protocol/vusb/usbdrv/usbdrvasm15.inc
+++ /dev/null
@@ -1,423 +0,0 @@
-/* Name: usbdrvasm15.inc
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: contributed by V. Bosch
- * Creation Date: 2007-08-06
- * Tabsize: 4
- * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * Revision: $Id: usbdrvasm15.inc 740 2009-04-13 18:23:31Z cs $
- */
-
-/* Do not link this file! Link usbdrvasm.S instead, which includes the
- * appropriate implementation!
- */
-
-/*
-General Description:
-This file is the 15 MHz version of the asssembler part of the USB driver. It
-requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC
-oscillator).
-
-See usbdrv.h for a description of the entire driver.
-
-Since almost all of this code is timing critical, don't change unless you
-really know what you are doing! Many parts require not only a maximum number
-of CPU cycles, but even an exact number of cycles!
-*/
-
-;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
-;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte
-; Numbers in brackets are clocks counted from center of last sync bit
-; when instruction starts
-
-;----------------------------------------------------------------------------
-; order of registers pushed:
-; YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4
-;----------------------------------------------------------------------------
-USB_INTR_VECTOR:
- push YL ;2 push only what is necessary to sync with edge ASAP
- in YL, SREG ;1
- push YL ;2
-;----------------------------------------------------------------------------
-; Synchronize with sync pattern:
-;
-; sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
-; sync up with J to K edge during sync pattern -- use fastest possible loops
-;The first part waits at most 1 bit long since we must be in sync pattern.
-;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
-;waitForJ, ensure that this prerequisite is met.
-waitForJ:
- inc YL
- sbis USBIN, USBMINUS
- brne waitForJ ; just make sure we have ANY timeout
-;-------------------------------------------------------------------------------
-; The following code results in a sampling window of < 1/4 bit
-; which meets the spec.
-;-------------------------------------------------------------------------------
-waitForK: ;-
- sbis USBIN, USBMINUS ;1 [00] <-- sample
- rjmp foundK ;2 [01]
- sbis USBIN, USBMINUS ; <-- sample
- rjmp foundK
- sbis USBIN, USBMINUS ; <-- sample
- rjmp foundK
- sbis USBIN, USBMINUS ; <-- sample
- rjmp foundK
- sbis USBIN, USBMINUS ; <-- sample
- rjmp foundK
- sbis USBIN, USBMINUS ; <-- sample
- rjmp foundK
-#if USB_COUNT_SOF
- lds YL, usbSofCount
- inc YL
- sts usbSofCount, YL
-#endif /* USB_COUNT_SOF */
-#ifdef USB_SOF_HOOK
- USB_SOF_HOOK
-#endif
- rjmp sofError
-;------------------------------------------------------------------------------
-; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for
-; center sampling]
-; we have 1 bit time for setup purposes, then sample again.
-; Numbers in brackets are cycles from center of first sync (double K)
-; bit after the instruction
-;------------------------------------------------------------------------------
-foundK: ;- [02]
- lds YL, usbInputBufOffset;2 [03+04] tx loop
- push YH ;2 [05+06]
- clr YH ;1 [07]
- subi YL, lo8(-(usbRxBuf)) ;1 [08] [rx loop init]
- sbci YH, hi8(-(usbRxBuf)) ;1 [09] [rx loop init]
- push shift ;2 [10+11]
- ser shift ;1 [12]
- sbis USBIN, USBMINUS ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early)
- rjmp haveTwoBitsK ;2 [00] [14]
- pop shift ;2 [15+16] undo the push from before
- pop YH ;2 [17+18] undo the push from before
- rjmp waitForK ;2 [19+20] this was not the end of sync, retry
-; The entire loop from waitForK until rjmp waitForK above must not exceed two
-; bit times (= 20 cycles).
-
-;----------------------------------------------------------------------------
-; push more registers and initialize values while we sample the first bits:
-;----------------------------------------------------------------------------
-haveTwoBitsK: ;- [01]
- push x1 ;2 [02+03]
- push x2 ;2 [04+05]
- push x3 ;2 [06+07]
- push bitcnt ;2 [08+09]
- in x1, USBIN ;1 [00] [10] <-- sample bit 0
- bst x1, USBMINUS ;1 [01]
- bld shift, 0 ;1 [02]
- push cnt ;2 [03+04]
- ldi cnt, USB_BUFSIZE ;1 [05]
- push x4 ;2 [06+07] tx loop
- rjmp rxLoop ;2 [08]
-;----------------------------------------------------------------------------
-; Receiver loop (numbers in brackets are cycles within byte after instr)
-;----------------------------------------------------------------------------
-unstuff0: ;- [07] (branch taken)
- andi x3, ~0x01 ;1 [08]
- mov x1, x2 ;1 [09] x2 contains last sampled (stuffed) bit
- in x2, USBIN ;1 [00] [10] <-- sample bit 1 again
- andi x2, USBMASK ;1 [01]
- breq se0Hop ;1 [02] SE0 check for bit 1
- ori shift, 0x01 ;1 [03] 0b00000001
- nop ;1 [04]
- rjmp didUnstuff0 ;2 [05]
-;-----------------------------------------------------
-unstuff1: ;- [05] (branch taken)
- mov x2, x1 ;1 [06] x1 contains last sampled (stuffed) bit
- andi x3, ~0x02 ;1 [07]
- ori shift, 0x02 ;1 [08] 0b00000010
- nop ;1 [09]
- in x1, USBIN ;1 [00] [10] <-- sample bit 2 again
- andi x1, USBMASK ;1 [01]
- breq se0Hop ;1 [02] SE0 check for bit 2
- rjmp didUnstuff1 ;2 [03]
-;-----------------------------------------------------
-unstuff2: ;- [05] (branch taken)
- andi x3, ~0x04 ;1 [06]
- ori shift, 0x04 ;1 [07] 0b00000100
- mov x1, x2 ;1 [08] x2 contains last sampled (stuffed) bit
- nop ;1 [09]
- in x2, USBIN ;1 [00] [10] <-- sample bit 3
- andi x2, USBMASK ;1 [01]
- breq se0Hop ;1 [02] SE0 check for bit 3
- rjmp didUnstuff2 ;2 [03]
-;-----------------------------------------------------
-unstuff3: ;- [00] [10] (branch taken)
- in x2, USBIN ;1 [01] [11] <-- sample stuffed bit 3 one cycle too late
- andi x2, USBMASK ;1 [02]
- breq se0Hop ;1 [03] SE0 check for stuffed bit 3
- andi x3, ~0x08 ;1 [04]
- ori shift, 0x08 ;1 [05] 0b00001000
- rjmp didUnstuff3 ;2 [06]
-;----------------------------------------------------------------------------
-; extra jobs done during bit interval:
-;
-; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs],
-; overflow check, jump to the head of rxLoop
-; bit 1: SE0 check
-; bit 2: SE0 check, recovery from delay [bit 0 tasks took too long]
-; bit 3: SE0 check, recovery from delay [bit 0 tasks took too long]
-; bit 4: SE0 check, none
-; bit 5: SE0 check, none
-; bit 6: SE0 check, none
-; bit 7: SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others
-;----------------------------------------------------------------------------
-rxLoop: ;- [09]
- in x2, USBIN ;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed)
- andi x2, USBMASK ;1 [01]
- brne SkipSe0Hop ;1 [02]
-se0Hop: ;- [02]
- rjmp se0 ;2 [03] SE0 check for bit 1
-SkipSe0Hop: ;- [03]
- ser x3 ;1 [04]
- andi shift, 0xf9 ;1 [05] 0b11111001
- breq unstuff0 ;1 [06]
-didUnstuff0: ;- [06]
- eor x1, x2 ;1 [07]
- bst x1, USBMINUS ;1 [08]
- bld shift, 1 ;1 [09]
- in x1, USBIN ;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed)
- andi x1, USBMASK ;1 [01]
- breq se0Hop ;1 [02] SE0 check for bit 2
- andi shift, 0xf3 ;1 [03] 0b11110011
- breq unstuff1 ;1 [04] do remaining work for bit 1
-didUnstuff1: ;- [04]
- eor x2, x1 ;1 [05]
- bst x2, USBMINUS ;1 [06]
- bld shift, 2 ;1 [07]
- nop2 ;2 [08+09]
- in x2, USBIN ;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed)
- andi x2, USBMASK ;1 [01]
- breq se0Hop ;1 [02] SE0 check for bit 3
- andi shift, 0xe7 ;1 [03] 0b11100111
- breq unstuff2 ;1 [04]
-didUnstuff2: ;- [04]
- eor x1, x2 ;1 [05]
- bst x1, USBMINUS ;1 [06]
- bld shift, 3 ;1 [07]
-didUnstuff3: ;- [07]
- andi shift, 0xcf ;1 [08] 0b11001111
- breq unstuff3 ;1 [09]
- in x1, USBIN ;1 [00] [10] <-- sample bit 4
- andi x1, USBMASK ;1 [01]
- breq se0Hop ;1 [02] SE0 check for bit 4
- eor x2, x1 ;1 [03]
- bst x2, USBMINUS ;1 [04]
- bld shift, 4 ;1 [05]
-didUnstuff4: ;- [05]
- andi shift, 0x9f ;1 [06] 0b10011111
- breq unstuff4 ;1 [07]
- nop2 ;2 [08+09]
- in x2, USBIN ;1 [00] [10] <-- sample bit 5
- andi x2, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for bit 5
- eor x1, x2 ;1 [03]
- bst x1, USBMINUS ;1 [04]
- bld shift, 5 ;1 [05]
-didUnstuff5: ;- [05]
- andi shift, 0x3f ;1 [06] 0b00111111
- breq unstuff5 ;1 [07]
- nop2 ;2 [08+09]
- in x1, USBIN ;1 [00] [10] <-- sample bit 6
- andi x1, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for bit 6
- eor x2, x1 ;1 [03]
- bst x2, USBMINUS ;1 [04]
- bld shift, 6 ;1 [05]
-didUnstuff6: ;- [05]
- cpi shift, 0x02 ;1 [06] 0b00000010
- brlo unstuff6 ;1 [07]
- nop2 ;2 [08+09]
- in x2, USBIN ;1 [00] [10] <-- sample bit 7
- andi x2, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for bit 7
- eor x1, x2 ;1 [03]
- bst x1, USBMINUS ;1 [04]
- bld shift, 7 ;1 [05]
-didUnstuff7: ;- [05]
- cpi shift, 0x04 ;1 [06] 0b00000100
- brlo unstuff7 ;1 [07]
- eor x3, shift ;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others
- nop ;1 [09]
- in x1, USBIN ;1 [00] [10] <-- sample bit 0
- st y+, x3 ;2 [01+02] store data
- eor x2, x1 ;1 [03]
- bst x2, USBMINUS ;1 [04]
- bld shift, 0 ;1 [05]
- subi cnt, 1 ;1 [06]
- brcs overflow ;1 [07]
- rjmp rxLoop ;2 [08]
-;-----------------------------------------------------
-unstuff4: ;- [08]
- andi x3, ~0x10 ;1 [09]
- in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 4
- andi x1, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for stuffed bit 4
- ori shift, 0x10 ;1 [03]
- rjmp didUnstuff4 ;2 [04]
-;-----------------------------------------------------
-unstuff5: ;- [08]
- ori shift, 0x20 ;1 [09]
- in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 5
- andi x2, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for stuffed bit 5
- andi x3, ~0x20 ;1 [03]
- rjmp didUnstuff5 ;2 [04]
-;-----------------------------------------------------
-unstuff6: ;- [08]
- andi x3, ~0x40 ;1 [09]
- in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 6
- andi x1, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for stuffed bit 6
- ori shift, 0x40 ;1 [03]
- rjmp didUnstuff6 ;2 [04]
-;-----------------------------------------------------
-unstuff7: ;- [08]
- andi x3, ~0x80 ;1 [09]
- in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 7
- andi x2, USBMASK ;1 [01]
- breq se0 ;1 [02] SE0 check for stuffed bit 7
- ori shift, 0x80 ;1 [03]
- rjmp didUnstuff7 ;2 [04]
-
-macro POP_STANDARD ; 16 cycles
- pop x4
- pop cnt
- pop bitcnt
- pop x3
- pop x2
- pop x1
- pop shift
- pop YH
- endm
-macro POP_RETI ; 5 cycles
- pop YL
- out SREG, YL
- pop YL
- endm
-
-#include "asmcommon.inc"
-
-;---------------------------------------------------------------------------
-; USB spec says:
-; idle = J
-; J = (D+ = 0), (D- = 1)
-; K = (D+ = 1), (D- = 0)
-; Spec allows 7.5 bit times from EOP to SOP for replies
-;---------------------------------------------------------------------------
-bitstuffN: ;- [04]
- eor x1, x4 ;1 [05]
- clr x2 ;1 [06]
- nop ;1 [07]
- rjmp didStuffN ;1 [08]
-;---------------------------------------------------------------------------
-bitstuff6: ;- [04]
- eor x1, x4 ;1 [05]
- clr x2 ;1 [06]
- rjmp didStuff6 ;1 [07]
-;---------------------------------------------------------------------------
-bitstuff7: ;- [02]
- eor x1, x4 ;1 [03]
- clr x2 ;1 [06]
- nop ;1 [05]
- rjmp didStuff7 ;1 [06]
-;---------------------------------------------------------------------------
-sendNakAndReti: ;- [-19]
- ldi x3, USBPID_NAK ;1 [-18]
- rjmp sendX3AndReti ;1 [-17]
-;---------------------------------------------------------------------------
-sendAckAndReti: ;- [-17]
- ldi cnt, USBPID_ACK ;1 [-16]
-sendCntAndReti: ;- [-16]
- mov x3, cnt ;1 [-15]
-sendX3AndReti: ;- [-15]
- ldi YL, 20 ;1 [-14] x3==r20 address is 20
- ldi YH, 0 ;1 [-13]
- ldi cnt, 2 ;1 [-12]
-; rjmp usbSendAndReti fallthrough
-;---------------------------------------------------------------------------
-;usbSend:
-;pointer to data in 'Y'
-;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
-;uses: x1...x4, btcnt, shift, cnt, Y
-;Numbers in brackets are time since first bit of sync pattern is sent
-;We need not to match the transfer rate exactly because the spec demands
-;only 1.5% precision anyway.
-usbSendAndReti: ;- [-13] 13 cycles until SOP
- in x2, USBDDR ;1 [-12]
- ori x2, USBMASK ;1 [-11]
- sbi USBOUT, USBMINUS ;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups)
- in x1, USBOUT ;1 [-08] port mirror for tx loop
- out USBDDR, x2 ;1 [-07] <- acquire bus
- ; need not init x2 (bitstuff history) because sync starts with 0
- ldi x4, USBMASK ;1 [-06] exor mask
- ldi shift, 0x80 ;1 [-05] sync byte is first byte sent
- ldi bitcnt, 6 ;1 [-04]
-txBitLoop: ;- [-04] [06]
- sbrs shift, 0 ;1 [-03] [07]
- eor x1, x4 ;1 [-02] [08]
- ror shift ;1 [-01] [09]
-didStuffN: ;- [09]
- out USBOUT, x1 ;1 [00] [10] <-- out N
- ror x2 ;1 [01]
- cpi x2, 0xfc ;1 [02]
- brcc bitstuffN ;1 [03]
- dec bitcnt ;1 [04]
- brne txBitLoop ;1 [05]
- sbrs shift, 0 ;1 [06]
- eor x1, x4 ;1 [07]
- ror shift ;1 [08]
-didStuff6: ;- [08]
- nop ;1 [09]
- out USBOUT, x1 ;1 [00] [10] <-- out 6
- ror x2 ;1 [01]
- cpi x2, 0xfc ;1 [02]
- brcc bitstuff6 ;1 [03]
- sbrs shift, 0 ;1 [04]
- eor x1, x4 ;1 [05]
- ror shift ;1 [06]
- ror x2 ;1 [07]
-didStuff7: ;- [07]
- ldi bitcnt, 6 ;1 [08]
- cpi x2, 0xfc ;1 [09]
- out USBOUT, x1 ;1 [00] [10] <-- out 7
- brcc bitstuff7 ;1 [01]
- ld shift, y+ ;2 [02+03]
- dec cnt ;1 [04]
- brne txBitLoop ;1 [05]
-makeSE0:
- cbr x1, USBMASK ;1 [06] prepare SE0 [spec says EOP may be 19 to 23 cycles]
- lds x2, usbNewDeviceAddr;2 [07+08]
- lsl x2 ;1 [09] we compare with left shifted address
-;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
-;set address only after data packet was sent, not after handshake
- out USBOUT, x1 ;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle
- subi YL, 20 + 2 ;1 [01] Only assign address on data packets, not ACK/NAK in x3
- sbci YH, 0 ;1 [02]
- breq skipAddrAssign ;1 [03]
- sts usbDeviceAddr, x2 ;2 [04+05] if not skipped: SE0 is one cycle longer
-;----------------------------------------------------------------------------
-;end of usbDeviceAddress transfer
-skipAddrAssign: ;- [03/04]
- ldi x2, 1<<USB_INTR_PENDING_BIT ;1 [05] int0 occurred during TX -- clear pending flag
- USB_STORE_PENDING(x2) ;1 [06]
- ori x1, USBIDLE ;1 [07]
- in x2, USBDDR ;1 [08]
- cbr x2, USBMASK ;1 [09] set both pins to input
- mov x3, x1 ;1 [10]
- cbr x3, USBMASK ;1 [11] configure no pullup on both pins
- ldi x4, 3 ;1 [12]
-se0Delay: ;- [12] [15]
- dec x4 ;1 [13] [16]
- brne se0Delay ;1 [14] [17]
- nop2 ;2 [18+19]
- out USBOUT, x1 ;1 [20] <--out J (idle) -- end of SE0 (EOP sig.)
- out USBDDR, x2 ;1 [21] <--release bus now
- out USBOUT, x3 ;1 [22] <--ensure no pull-up resistors are active
- rjmp doReturn ;1 [23]
-;---------------------------------------------------------------------------