summaryrefslogtreecommitdiff
path: root/ps2_vusb/main.c
diff options
context:
space:
mode:
authortmk2011-01-29 00:44:05 +0900
committertmk2011-02-22 03:08:49 +0900
commit4f5f1a53d449172263e83c5769c92976e0d3332e (patch)
tree53c87958a30812cd548d83768c1348680e224c3d /ps2_vusb/main.c
parentc07408a44784c0fdbca33567926a2c0aa4e8e17e (diff)
added PS/2 to USB converter use V-USB as protocol stack
Diffstat (limited to 'ps2_vusb/main.c')
-rw-r--r--ps2_vusb/main.c126
1 files changed, 126 insertions, 0 deletions
diff --git a/ps2_vusb/main.c b/ps2_vusb/main.c
new file mode 100644
index 000000000..359e28254
--- /dev/null
+++ b/ps2_vusb/main.c
@@ -0,0 +1,126 @@
+/* Name: main.c
+ * Project: hid-mouse, a very simple HID example
+ * Author: Christian Starkjohann
+ * Creation Date: 2008-04-07
+ * Tabsize: 4
+ * Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: main.c 790 2010-05-30 21:00:26Z cs $
+ */
+
+/*
+This example should run on most AVRs with only little changes. No special
+hardware resources except INT0 are used. You may have to change usbconfig.h for
+different I/O pins for USB. Please note that USB D+ must be the INT0 pin, or
+at least be connected to INT0 as well.
+
+We use VID/PID 0x046D/0xC00E which is taken from a Logitech mouse. Don't
+publish any hardware using these IDs! This is for demonstration only!
+*/
+
+#include <stdint.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h> /* for sei() */
+#include <util/delay.h> /* for _delay_ms() */
+
+#include <avr/pgmspace.h> /* required by usbdrv.h */
+#include "usbdrv.h"
+#include "usart_print.h" /* This is also an example for using debug macros */
+#include "ps2.h"
+#include "usb_keycodes.h"
+#include "matrix_skel.h"
+#include "keymap_skel.h"
+#include "layer.h"
+#include "print.h"
+#include "debug.h"
+#include "sendchar.h"
+#include "keyboard.h"
+#include "timer.h"
+
+/* ------------------------------------------------------------------------- */
+/* ----------------------------- USB interface ----------------------------- */
+/* ------------------------------------------------------------------------- */
+
+
+
+
+
+
+int main(void)
+{
+uchar i;
+
+print_enable = true;
+debug_enable = true;
+timer_init();
+matrix_init();
+
+ wdt_enable(WDTO_1S);
+ /* Even if you don't use the watchdog, turn it off here. On newer devices,
+ * the status of the watchdog (on/off, period) is PRESERVED OVER RESET!
+ */
+ /* RESET status: all port bits are inputs without pull-up.
+ * That's the way we need D+ and D-. Therefore we don't need any
+ * additional hardware initialization.
+ */
+ odDebugInit();
+ DBG1(0x00, 0, 0); /* debug output: main starts */
+ usbInit();
+ usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */
+ i = 0;
+ while(--i){ /* fake USB disconnect for > 250 ms */
+ wdt_reset();
+ _delay_ms(1);
+ }
+ usbDeviceConnect();
+ sei();
+
+ uint8_t fn_bits = 0;
+ while (1) { /* main event loop */
+ DBG1(0x02, 0, 0); /* debug output: main loop iterates */
+ wdt_reset();
+ usbPoll();
+
+/*
+static uint8_t code = 0;
+code = ps2_host_recv();
+if (code) {
+ odDebug(0x05, &code, 1);
+}
+*/
+ matrix_scan();
+ if (matrix_is_modified()) {
+ //matrix_print(); // too heavy on USART
+ fn_bits = 0;
+ report_swap();
+ report_clear();
+ for (int row = 0; row < matrix_rows(); row++) {
+ for (int col = 0; col < matrix_cols(); col++) {
+ if (!matrix_is_on(row, col)) continue;
+
+ uint8_t code = layer_get_keycode(row, col);
+ if (code == KB_NO) {
+ // do nothing
+ }
+ else if (IS_MOD(code)) {
+ report_add_mod(MOD_BIT(code));
+ }
+ else if (IS_KEY(code)) {
+ report_add_key(code);
+ }
+ else if (IS_FN(code)) {
+ fn_bits |= FN_BIT(code);
+ }
+ else {
+ debug("ignore keycode: "); debug_hex(code); debug("\n");
+ }
+ }
+ }
+ }
+ layer_switching(fn_bits);
+ if (matrix_is_modified()) {
+ report_send();
+ }
+ }
+}