summaryrefslogtreecommitdiff
path: root/keyboards/converter/usb_usb/rules.mk
diff options
context:
space:
mode:
authorCallum Oakley2017-08-19 10:34:45 +0100
committerCallum Oakley2017-08-19 10:34:45 +0100
commita6845036e25c4f4d936dcd12cd0ddedd2894b30e (patch)
treeb23b4e8d9d757aa3c0d42be561572533ae0d126c /keyboards/converter/usb_usb/rules.mk
parent84a8aabe5bf8807595f98de44d18f6a31b892edf (diff)
parent7277f09bbadcce120f819132dec8ff7172caacc4 (diff)
Merge branch 'master' of https://github.com/qmk/qmk_firmware
Diffstat (limited to 'keyboards/converter/usb_usb/rules.mk')
-rw-r--r--keyboards/converter/usb_usb/rules.mk66
1 files changed, 66 insertions, 0 deletions
diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk
new file mode 100644
index 000000000..4ee6cdb1c
--- /dev/null
+++ b/keyboards/converter/usb_usb/rules.mk
@@ -0,0 +1,66 @@
+# MCU name
+MCU ?= atmega32u4
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU ?= 8000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH ?= AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB ?= $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+# BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes # Console for debug(+400)
+# COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE ?= yes
+
+
+CUSTOM_MATRIX = yes
+SRC = custom_matrix.cpp
+include $(TMK_DIR)/protocol/usb_hid.mk