summaryrefslogtreecommitdiff
path: root/hhkb/Makefile.vusb
diff options
context:
space:
mode:
authortmk2011-05-16 00:08:06 +0900
committertmk2011-05-16 00:14:06 +0900
commit068c31a7ba9fc6aea33f69c0edb30ad195c320ec (patch)
tree776681e8d84d803d058d0657706c5a24f2c22976 /hhkb/Makefile.vusb
parent61e12a3157ea6860f23bf8e29372aa70aeb02be0 (diff)
added initial V-USB support for HHKB
Diffstat (limited to 'hhkb/Makefile.vusb')
-rw-r--r--hhkb/Makefile.vusb83
1 files changed, 83 insertions, 0 deletions
diff --git a/hhkb/Makefile.vusb b/hhkb/Makefile.vusb
new file mode 100644
index 000000000..ea89a6f6a
--- /dev/null
+++ b/hhkb/Makefile.vusb
@@ -0,0 +1,83 @@
+# Target file name (without extension).
+TARGET = hhkb_vusb
+
+# Directory common source filess exist
+COMMON_DIR = ..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+TARGET_SRC = main_vusb.c \
+ keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config_vusb.h
+
+
+# V-USB debug level: To use ps2_usart.c level must be 0
+# ps2_usart.c requires USART to receive PS/2 signal.
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+#MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+MCU = atmega168
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 20000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+#USB_NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+
+include $(COMMON_DIR)/Makefile.vusb
+include $(COMMON_DIR)/Makefile.common