module Propellor.Property.Dns ( module Propellor.Types.Dns, primary, secondary, secondaryFor, mkSOA, writeZoneFile, nextSerialNumber, adjustSerialNumber, serialNumberOffset, genZone, ) where import Propellor import Propellor.Types.Dns import Propellor.Property.File import Propellor.Types.Attr import qualified Propellor.Property.Apt as Apt import qualified Propellor.Property.Service as Service import Utility.Applicative import qualified Data.Map as M import qualified Data.Set as S import Data.List -- | Primary dns server for a domain. -- -- Most of the content of the zone file is configured by setting properties -- of hosts. For example, -- -- > host "foo.example.com" -- > & ipv4 "192.168.1.1" -- > & alias "mail.exmaple.com" -- -- Will cause that hostmame and its alias to appear in the zone file, -- with the configured IP address. -- -- The [(BindDomain, Record)] list can be used for additional records -- that cannot be configured elsewhere. For example, it might contain -- CNAMEs pointing at hosts that propellor does not control. primary :: [Host] -> Domain -> SOA -> [(BindDomain, Record)] -> Property primary hosts domain soa rs = withwarnings (check needupdate baseprop) `requires` servingZones `onChange` Service.reloaded "bind9" where (partialzone, warnings) = genZone hosts domain soa zone = partialzone { zHosts = zHosts partialzone ++ rs } zonefile = "/etc/bind/propellor/db." ++ domain baseprop = Property ("dns primary for " ++ domain) (makeChange $ writeZoneFile zone zonefile) (addNamedConf conf) withwarnings p = adjustProperty p $ \satisfy -> do mapM_ warningMessage warnings satisfy conf = NamedConf { confDomain = domain , confType = Master , confFile = zonefile , confMasters = [] , confLines = [] } needupdate = do v <- readZonePropellorFile zonefile return $ case v of Nothing -> True Just oldzone -> -- compare everything except serial let oldserial = sSerialĀ (zSOA oldzone) z = zone { zSOA = (zSOA zone) { sSerial = oldserial } } in z /= oldzone || oldserial < sSerial (zSOA zone) -- | Secondary dns server for a domain. -- -- The primary server is determined by looking at the properties of other -- hosts to find which one is configured as the primary. -- -- Note that if a host is declared to be a primary and a secondary dns -- server for the same domain, the primary server config always wins. secondary :: [Host] -> Domain -> Property secondary hosts domain = secondaryFor masters hosts domain where masters = M.keys $ M.filter ismaster $ hostAttrMap hosts ismaster attr = case M.lookup domain (_namedconf attr) of Nothing -> False Just conf -> confType conf == Master && confDomain conf == domain -- | This variant is useful if the primary server does not have its DNS -- configured via propellor. secondaryFor :: [HostName] -> [Host] -> Domain -> Property secondaryFor masters hosts domain = pureAttrProperty desc (addNamedConf conf) `requires` servingZones where desc = "dns secondary for " ++ domain conf = NamedConf { confDomain = domain , confType = Secondary , confFile = "db." ++ domain , confMasters = concatMap (\m -> hostAddresses m hosts) masters , confLines = ["allow-transfer { }"] } -- | Rewrites the whole named.conf.local file to serve the zones -- configured by `primary` and `secondary`, and ensures that bind9 is -- running. servingZones :: Property servingZones = property "serving configured dns zones" go `requires` Apt.serviceInstalledRunning "bind9" `onChange` Service.reloaded "bind9" where go = do zs <- getNamedConf ensureProperty $ hasContent namedConfFile $ concatMap confStanza $ M.elems zs confStanza :: NamedConf -> [Line] confStanza c = [ "// automatically generated by propellor" , "zone \"" ++ confDomain c ++ "\" {" , cfgline "type" (if confType c == Master then "master" else "slave") , cfgline "file" ("\"" ++ confFile c ++ "\"") ] ++ (if null (confMasters c) then [] else mastersblock) ++ (map (\l -> "\t" ++ l ++ ";") (confLines c)) ++ [ "};" , "" ] where cfgline f v = "\t" ++ f ++ " " ++ v ++ ";" mastersblock = [ "\tmasters {" ] ++ (map (\ip -> "\t\t" ++ fromIPAddr ip ++ ";") (confMasters c)) ++ [ "\t};" ] namedConfFile :: FilePath namedConfFile = "/etc/bind/named.conf.local" -- | Generates a SOA with some fairly sane numbers in it. -- -- The Domain is the domain to use in the SOA record. Typically -- something like ns1.example.com. So, not the domain that this is the SOA -- record for. -- -- The SerialNumber can be whatever serial number was used by the domain -- before propellor started managing it. Or 0 if the domain has only ever -- been managed by propellor. -- -- You do not need to increment the SerialNumber when making changes! -- Propellor will automatically add the number of commits in the git -- repository to the SerialNumber. -- -- Handy trick: You don't need to list IPAddrs in the [Record], -- just make some Host set its `alias` to the root of domain. mkSOA :: Domain -> SerialNumber -> [Record] -> SOA mkSOA d sn rs = SOA { sDomain = AbsDomain d , sSerial = sn , sRefresh = hours 4 , sRetry = hours 1 , sExpire = 2419200 -- 4 weeks , sNegativeCacheTTL = hours 8 , sRecord = rs } where hours n = n * 60 * 60 dValue :: BindDomain -> String dValue (RelDomain d) = d dValue (AbsDomain d) = d ++ "." dValue (SOADomain) = "@" rField :: Record -> String rField (Address (IPv4 _)) = "A" rField (Address (IPv6 _)) = "AAAA" rField (CNAME _) = "CNAME" rField (MX _ _) = "MX" rField (NS _) = "NS" rField (TXT _) = "TXT" rField (SRV _ _ _ _) = "SRV" rValue :: Record -> String rValue (Address (IPv4 addr)) = addr rValue (Address (IPv6 addr)) = addr rValue (CNAME d) = dValue d rValue (MX pri d) = show pri ++ " " ++ dValue d rValue (NS d) = dValue d rValue (SRV priority weight port target) = unwords [ show priority , show weight , show port , dValue target ] rValue (TXT s) = [q] ++ filter (/= q) s ++ [q] where q = '"' -- | Adjusts the serial number of the zone to always be larger -- than the serial number in the Zone record, -- and always be larger than the passed SerialNumber. nextSerialNumber :: Zone -> SerialNumber -> Zone nextSerialNumber z serial = adjustSerialNumber z $ \sn -> succ $ max sn serial adjustSerialNumber :: Zone -> (SerialNumber -> SerialNumber) -> Zone adjustSerialNumber (Zone d soa l) f = Zone d soa' l where soa' = soa { sSerial = f (sSerial soa) } -- | Count the number of git commits made to the current branch. serialNumberOffset :: IO SerialNumber serialNumberOffset = fromIntegral . length . lines <$> readProcess "git" ["log", "--pretty=%H"] -- | Write a Zone out to a to a file. -- -- The serial number in the Zone automatically has the serialNumberOffset -- added to it. Also, just in case, the old serial number used in the zone -- file is checked, and if it is somehow larger, its succ is used. writeZoneFile :: Zone -> FilePath -> IO () writeZoneFile z f = do oldserial <- oldZoneFileSerialNumber f offset <- serialNumberOffset let z' = nextSerialNumber (adjustSerialNumber z (+ offset)) oldserial createDirectoryIfMissing True (takeDirectory f) writeFile f (genZoneFile z') writeZonePropellorFile f z' -- | Next to the zone file, is a ".propellor" file, which contains -- the serialized Zone. This saves the bother of parsing -- the horrible bind zone file format. zonePropellorFile :: FilePath -> FilePath zonePropellorFile f = f ++ ".propellor" oldZoneFileSerialNumber :: FilePath -> IO SerialNumber oldZoneFileSerialNumber = maybe 0 (sSerial . zSOA) <$$> readZonePropellorFile writeZonePropellorFile :: FilePath -> Zone -> IO () writeZonePropellorFile f z = writeFile (zonePropellorFile f) (show z) readZonePropellorFile :: FilePath -> IO (Maybe Zone) readZonePropellorFile f = catchDefaultIO Nothing $ readish <$> readFileStrict (zonePropellorFile f) -- | Generating a zone file. genZoneFile :: Zone -> String genZoneFile (Zone zdomain soa rs) = unlines $ header : genSOA zdomain soa ++ map genr rs where header = com $ "BIND zone file for " ++ zdomain ++ ". Generated by propellor, do not edit." genr (d, r) = genRecord zdomain (Just d, r) genRecord :: Domain -> (Maybe BindDomain, Record) -> String genRecord zdomain (mdomain, record) = intercalate "\t" [ hn , "IN" , rField record , rValue record ] where hn = maybe "" (domainHost zdomain) mdomain genSOA :: Domain -> SOA -> [String] genSOA zdomain soa = header ++ map (genRecord zdomain) (zip (repeat Nothing) (sRecord soa)) where header = -- "@ IN SOA ns1.example.com. root (" [ intercalate "\t" [ dValue SOADomain , "IN" , "SOA" , dValue (sDomain soa) , "root" , "(" ] , headerline sSerial "Serial" , headerline sRefresh "Refresh" , headerline sRetry "Retry" , headerline sExpire "Expire" , headerline sNegativeCacheTTL "Negative Cache TTL" , inheader ")" ] headerline r comment = inheader $ show (r soa) ++ "\t\t" ++ com comment inheader l = "\t\t\t" ++ l -- | Comment line in a zone file. com :: String -> String com s = "; " ++ s type WarningMessage = String -- | Generates a Zone for a particular Domain from the DNS properies of all -- hosts that propellor knows about that are in that Domain. genZone :: [Host] -> Domain -> SOA -> (Zone, [WarningMessage]) genZone hosts zdomain soa = let (warnings, zhosts) = partitionEithers $ concat $ map concat [ map hostips inzdomain , map hostrecords inzdomain , map addcnames (M.elems m) ] in (Zone zdomain soa (nub zhosts), warnings) where m = hostAttrMap hosts -- Known hosts with hostname located in the zone's domain. inzdomain = M.elems $ M.filterWithKey (\hn _ -> inDomain zdomain $ AbsDomain $ hn) m -- Each host with a hostname located in the zdomain -- should have 1 or more IPAddrs in its Attr. -- -- If a host lacks any IPAddr, it's probably a misconfiguration, -- so warn. hostips :: Attr -> [Either WarningMessage (BindDomain, Record)] hostips attr | null l = [Left $ "no IP address defined for host " ++ _hostname attr] | otherwise = map Right l where l = zip (repeat $ AbsDomain $ _hostname attr) (map Address $ getAddresses attr) -- Any host, whether its hostname is in the zdomain or not, -- may have cnames which are in the zdomain. The cname may even be -- the same as the root of the zdomain, which is a nice way to -- specify IP addresses for a SOA record. -- -- Add Records for those.. But not actually, usually, cnames! -- Why not? Well, using cnames doesn't allow doing some things, -- including MX and round robin DNS, and certianly CNAMES -- shouldn't be used in SOA records. -- -- We typically know the host's IPAddrs anyway. -- So we can just use the IPAddrs. addcnames :: Attr -> [Either WarningMessage (BindDomain, Record)] addcnames attr = concatMap gen $ filter (inDomain zdomain) $ mapMaybe getCNAME $ S.toList (_dns attr) where gen c = case getAddresses attr of [] -> [ret (CNAME c)] l -> map (ret . Address) l where ret record = Right (c, record) -- Adds any other DNS records for a host located in the zdomain. hostrecords :: Attr -> [Either WarningMessage (BindDomain, Record)] hostrecords attr = map Right l where l = zip (repeat $ AbsDomain $ _hostname attr) (S.toList $ S.filter (\r -> isNothing (getIPAddr r) && isNothing (getCNAME r)) (_dns attr)) inDomain :: Domain -> BindDomain -> Bool inDomain domain (AbsDomain d) = domain == d || ('.':domain) `isSuffixOf` d inDomain _ _ = False -- can't tell, so assume not -- | Gets the hostname of the second domain, relative to the first domain, -- suitable for using in a zone file. domainHost :: Domain -> BindDomain -> String domainHost _ (RelDomain d) = d domainHost _ SOADomain = "@" domainHost base (AbsDomain d) | dotbase `isSuffixOf` d = take (length d - length dotbase) d | base == d = "@" | otherwise = d where dotbase = '.':base