From 8d62df87bb8bc667f6b38177fddcac38f8102e61 Mon Sep 17 00:00:00 2001 From: Joey Hess Date: Sat, 4 Jan 2020 15:14:53 -0400 Subject: comment --- .../comment_1_fc192587233c3cda7d0f78f67311de49._comment | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 doc/forum/using_propellor_on_low_RAM_devices__63__/comment_1_fc192587233c3cda7d0f78f67311de49._comment (limited to 'doc/forum') diff --git a/doc/forum/using_propellor_on_low_RAM_devices__63__/comment_1_fc192587233c3cda7d0f78f67311de49._comment b/doc/forum/using_propellor_on_low_RAM_devices__63__/comment_1_fc192587233c3cda7d0f78f67311de49._comment new file mode 100644 index 00000000..af019cf6 --- /dev/null +++ b/doc/forum/using_propellor_on_low_RAM_devices__63__/comment_1_fc192587233c3cda7d0f78f67311de49._comment @@ -0,0 +1,12 @@ +[[!comment format=mdwn + username="joey" + subject="""comment 1""" + date="2020-01-04T19:02:08Z" + content=""" +500 mb seems a bit higher than typical; my own config.hs (500 lines) +needs 416 mb to build, and the example config.hs included in propellor +needs 245 mb. + +I typically install swapspace on systems with 1 gb or less and it works +fine. I think the smallest system I've used propellor with was 500 mb. +"""]] -- cgit v1.2.3