From 60966e0625b63751b26d0d01ed6c5cf08de16c47 Mon Sep 17 00:00:00 2001 From: https://launchpad.net/~barthelemy Date: Tue, 7 Jan 2020 00:38:09 +0000 Subject: Added a comment --- ...comment_2_b58e57d9edb7c574ff8a72dbcd24d1b7._comment | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 doc/forum/using_propellor_on_low_RAM_devices__63__/comment_2_b58e57d9edb7c574ff8a72dbcd24d1b7._comment (limited to 'doc/forum/using_propellor_on_low_RAM_devices__63__/comment_2_b58e57d9edb7c574ff8a72dbcd24d1b7._comment') diff --git a/doc/forum/using_propellor_on_low_RAM_devices__63__/comment_2_b58e57d9edb7c574ff8a72dbcd24d1b7._comment b/doc/forum/using_propellor_on_low_RAM_devices__63__/comment_2_b58e57d9edb7c574ff8a72dbcd24d1b7._comment new file mode 100644 index 00000000..9356298b --- /dev/null +++ b/doc/forum/using_propellor_on_low_RAM_devices__63__/comment_2_b58e57d9edb7c574ff8a72dbcd24d1b7._comment @@ -0,0 +1,18 @@ +[[!comment format=mdwn + username="https://launchpad.net/~barthelemy" + nickname="barthelemy" + avatar="http://cdn.libravatar.org/avatar/e99cb15f6029de3225721b3ebdd0233905eb69698e9b229a8c4cc510a4135438" + subject="comment 2" + date="2020-01-07T00:38:09Z" + content=""" +Hi Joey, + +thank you for the feedback. I'm glad to know it is supposed to work in those cases. +It seems freedombox uses btrfs and swapfiles do not work on btrfs partitions. I thus tried with zram (apt get install zram-tools, which set up a 256 MiB swap). + +I could then run propellor --spin to the server, it passed. +Then I rm -rf /usr/local/propellor on server and ran propellor --spin again. +The build passed again (it took ~75 minute and at some point ghc took 570MiB but it succeedded). + +I'm back on track, thank you again! +"""]] -- cgit v1.2.3