path: root/propellor.cabal
AgeCommit message (Collapse)Author
2017-09-25releasing package propellor version 4.8.1Joey Hess
2017-09-25releasing package propellor version 4.8.0Joey Hess
2017-09-05Merge remote-tracking branch 'nicolas/lvm'Joey Hess
2017-09-01Add Lvm to propellor.cabalNicolas Schodet
2017-08-23releasing package propellor version 4.7.7Joey Hess
2017-08-01releasing package propellor version 4.7.6Joey Hess
2017-08-01releasing package propellor version 4.7.5Joey Hess
2017-08-01releasing package propellor version 4.7.4Joey Hess
2017-07-29releasing package propellor version 4.7.3Joey Hess
2017-07-29releasing package propellor version 4.7.2Joey Hess
2017-07-28releasing package propellor version 4.7.1Joey Hess
2017-07-28versionJoey Hess
2017-07-28releasing package propellor version 4.6.2Joey Hess
2017-07-27fix versionJoey Hess
2017-07-26propellor spinJoey Hess
2017-07-25releasing package propellor version 4.5.2Joey Hess
2017-07-25releasing package propellor version 4.5.1Joey Hess
2017-07-21calcPartTable using PartSpec DSLJoey Hess
* Generalized the PartSpec DSL, so it can be used for both disk image partitioning, and disk device partitioning, with different partition sizing methods as appropriate for the different uses. (minor API change) * Propellor.Property.Parted: Added calcPartTable function which uses PartSpec DiskPart, and a useDiskSpace combinator. This commit was sponsored by Thomas Hochstein on Patreon.
2017-07-17Propellor.Property.Sudo.enabledFor: Made revertableJoey Hess
(minor API change) This commit was sponsored by Henrik Riomar on Patreon.
2017-07-16Propellor.Property.Timezone: New module, contributed by Sean Whitton.Joey Hess
2017-07-15releasing package propellor version 4.3.4Joey Hess
2017-07-15add Propellor.Property.VersionedJoey Hess
New module which allows different versions of a property or host to be written down in a propellor config file. Has many applications, including staged upgrades and rollbacks. Note that it currently only supports RevertableProperty that has the same metatypes for its setup and cleanup sides. And, each RevertableProperty in a version definition needs to have the same metatypes as the others too. I tried a couple of times to add support for differing metatypes, but it got beyond my avilities to do. This commit was sponsored by Jeff Goeke-Smith on Patreon.
2017-07-13releasing package propellor version 4.3.3Joey Hess
2017-07-13rename src/config.hsJoey Hess
This works around an infelicity in stack; it complains when there are both a toplevel config.hs and a src/config.hs, despite that being fine with cabal.
2017-07-06releasing package propellor version 4.3.2Joey Hess
2017-07-06Really include Propellor.Property.FreeDesktop.Joey Hess
2017-07-06releasing package propellor version 4.3.1Joey Hess
2017-07-05DiskImage: Removed grubBootedJoey Hess
Properties that used to need it as a parameter now look at Info about the bootloader that is installed in the chroot that the disk image is created from. (API change) This is a simplication, and avoids the user needing to repeat themselves in the propellor config, thus avoiding mistakes. When no boot loader is installed, or multiple different ones are, disk image creation will fail, which seems reasonable. This commit was sponsored by Jake Vosloo on Patreon.
2017-07-05Image.grubBooted no longer takes a BIOS parameterJoey Hess
* DiskImage.grubBooted no longer takes a BIOS parameter, and no longer implicitly adds Grub.installed to the properties of the disk image. If you used DiskImage.grubBooted, you'll need to update your propellor configuration, removing the BIOS parameter from grubBooted and adding a Grub.installed property to the disk image, eg: & Grub.installed PC (API change) * Grub.installed: Avoid running update-grub when used in a chroot, since it will get confused. * DiskImage.Finalization: Simplified this type since it does not need to be used to install packages anymore. (API change) The advantage of doing this comes when using hostChroot with imageBuilt, since the Host then has its Grub.installed property explicitly listed so propellor knows about it when otherwise deploying that host. Also, it simplifies the quite complex imageBuilt parameters. This commit was sponsored by Ewen McNeill.
2017-07-05XFCE and applyPath propertiesJoey Hess
* Propellor.Property.XFCE added with some useful properties for the desktop environment. * Added File.applyPath property. This commit was sponsored by Riku Voipio.
2017-07-05LightDM.autoLogin: Make it require LightDM.installedJoey Hess
(minor API change as the type changed)
2017-06-18releasing package propellor version 4.0.6Joey Hess
2017-06-03Switch cabal file from Extensions to Default-Extensions to fix new picky ↵Joey Hess
hackage rejection.
2017-06-03releasing package propellor version 4.0.4Joey Hess
2017-05-15squelch cabal warning about Default-LanguageJoey Hess
Could use Hashell2010, but IIRC there are some slightly tricky differences.
2017-05-15Merge branch 'master' into joeyconfigJoey Hess
2017-05-15Removed dependency on MissingH, instead depends on split and hashable.Joey Hess
MissingH is a heavy dependency, which pulls in parsec and a bunch of stuff. So eliminating it makes propellor easier to install and less likely to fail to build. changesFileContent now uses hashable's hash. This may not be stable across upgrades, I'm not sure -- but it's surely ok here, as the hash is not stored. socketFile also uses hash. I *think* this is ok, even if it's not stable. If it's not stable, an upgrade might make propellor hash a hostname to a different number, but with 9 digets of number in use, the chances of a collision are small. In any case, I've opned a bug report asking for the stability to be documented, and I think it's intended to be stable, only the documentation is bad. NB: I have not checked that the arch linux and freebsd packages for the new deps, that Propellor.Bootstrap lists, are the right names or even exist. Since propellor depends on hashable, it could be changed to use unordered-containers, rather than containers, which would be faster and perhaps less deps too. This commit was sponsored by Alexander Thompson on Patreon.
2017-04-27Merge remote-tracking branch 'felix/restic-backup'Joey Hess
2017-04-27add Restic moduleFélix Sipma
2017-04-20increase cabal-versionJoey Hess
f045116b618e255c583376447be635c245d63909 does not work with cabal 1.16
2017-04-20releasing package propellor version 4.0.3Joey Hess
2017-04-09Merge remote-tracking branch 'origin' into joeyconfigJoey Hess
2017-04-09added Propellor.Property.Bootstrap (untested)Joey Hess
This commit was sponsored by Jake Vosloo on Patreon.
2017-03-25Merge branch 'joeyconfig'Joey Hess
2017-03-25switch git url to https for securityJoey Hess
2017-03-24releasing package propellor version 4.0.2Joey Hess
2017-03-19prep releaseJoey Hess
2017-03-15prep releaseJoey Hess
2017-03-01Fixed https url to propellor git repository.Joey Hess
2017-03-01releasing package propellor version 3.4.0Joey Hess