summaryrefslogtreecommitdiff
path: root/debian
AgeCommit message (Collapse)Author
2017-07-17Propellor.Property.LightDM.autoLogin: Made revertable.Joey Hess
* Propellor.Property.LightDM.autoLogin: Made revertable. (minor API change) * Propellor.Property.Conffile: Added lacksIniSetting. This commit was sponsored by Jack Hill on Patreon.
2017-07-17Propellor.Property.Sudo.enabledFor: Made revertableJoey Hess
(minor API change) This commit was sponsored by Henrik Riomar on Patreon.
2017-07-16Propellor.Property.Timezone: New module, contributed by Sean Whitton.Joey Hess
2017-07-15releasing package propellor version 4.3.4Joey Hess
2017-07-15add Propellor.Property.VersionedJoey Hess
New module which allows different versions of a property or host to be written down in a propellor config file. Has many applications, including staged upgrades and rollbacks. Note that it currently only supports RevertableProperty that has the same metatypes for its setup and cleanup sides. And, each RevertableProperty in a version definition needs to have the same metatypes as the others too. I tried a couple of times to add support for differing metatypes, but it got beyond my avilities to do. This commit was sponsored by Jeff Goeke-Smith on Patreon.
2017-07-13propellor spinJoey Hess
2017-07-13formattingJoey Hess
2017-07-13releasing package propellor version 4.3.3Joey Hess
2017-07-13Updated stack config to lts-8.22.Joey Hess
2017-07-13move unreleased stuff to topJoey Hess
2017-07-13Merge branch 'joeyconfig'Joey Hess
2017-07-13changelogJoey Hess
2017-07-12add bootstrapWith property to support stack and moreJoey Hess
* Hosts can be configured to build propellor using stack, by adding a property: & bootstrapWith (Robustly Stack) * Hosts can be configured to build propellor using cabal, but using only packages installed from the operating system. This will work on eg Debian: & bootstrapWith OSOnly propellor build its config using stack. (This does not affect how propellor is bootstrapped on a host by "propellor --spin host".) This has not yet been tested at all! But should probably work fine. This is based on earlier work by Arnaud Bailly, who made Propellor.Bootstrap use stack without parameterization. In Arnaud's patch, stack was installed using wget, but that only worked on linux-x86_64 and was insecure. I instead chose to use the distribution packages of stack, like is done for cabal. Debian stack has haskell-stack now, and it's getting into many distributions. This commit was sponsored by Francois Marier on Patreon.
2017-07-10User: add systemGroup and use it for systemAccountFor' Thanks, Félix Sipma.Joey Hess
2017-07-10Export a Restic.backup' property. Thanks, Félix Sipma.Joey Hess
2017-07-06releasing package propellor version 4.3.2Joey Hess
2017-07-06Really include Propellor.Property.FreeDesktop.Joey Hess
2017-07-06releasing package propellor version 4.3.1Joey Hess
2017-07-06Added reservedSpacePercentage to the PartSpec EDSL.Joey Hess
2017-07-05Added Propellor.Property.FreeDesktop module.Joey Hess
This commit was sponsored by Trenton Cronholm on Patreon.
2017-07-05releasing package propellor version 4.3.0Joey Hess
2017-07-05DiskImage: Removed grubBootedJoey Hess
Properties that used to need it as a parameter now look at Info about the bootloader that is installed in the chroot that the disk image is created from. (API change) This is a simplication, and avoids the user needing to repeat themselves in the propellor config, thus avoiding mistakes. When no boot loader is installed, or multiple different ones are, disk image creation will fail, which seems reasonable. This commit was sponsored by Jake Vosloo on Patreon.
2017-07-05releasing package propellor version 4.2.0Joey Hess
2017-07-05Image.grubBooted no longer takes a BIOS parameterJoey Hess
* DiskImage.grubBooted no longer takes a BIOS parameter, and no longer implicitly adds Grub.installed to the properties of the disk image. If you used DiskImage.grubBooted, you'll need to update your propellor configuration, removing the BIOS parameter from grubBooted and adding a Grub.installed property to the disk image, eg: & Grub.installed PC (API change) * Grub.installed: Avoid running update-grub when used in a chroot, since it will get confused. * DiskImage.Finalization: Simplified this type since it does not need to be used to install packages anymore. (API change) The advantage of doing this comes when using hostChroot with imageBuilt, since the Host then has its Grub.installed property explicitly listed so propellor knows about it when otherwise deploying that host. Also, it simplifies the quite complex imageBuilt parameters. This commit was sponsored by Ewen McNeill.
2017-07-05releasing package propellor version 4.1.0Joey Hess
2017-07-05Added File.checkOverwrite.Joey Hess
This commit was sponsored by Ethan Aubin.
2017-07-05File.isCopyOf: Fix bug that prevented this property from working when the ↵Joey Hess
destination file did not yet exist. This commit was sponsored by andrea rota.
2017-07-05XFCE and applyPath propertiesJoey Hess
* Propellor.Property.XFCE added with some useful properties for the desktop environment. * Added File.applyPath property. This commit was sponsored by Riku Voipio.
2017-07-05LightDM.autoLogin: Make it require LightDM.installedJoey Hess
(minor API change as the type changed)
2017-07-05avoid buffering container chain outputJoey Hess
When provisioning a container, output was buffered until the whole process was done; now output will be displayed immediately. I know this didn't used to be a problem. I belive it was introduced by accident when propellor started using concurrent-output. I know I've seen it for a while and never was bothered enough to get to the bottom of it; apparently "a while" was longer than I thought. Also refactored code to do with chain provisioning to all be in Propellor.Engine and avoided some duplication. This commit was sponsored by Anthony DeRobertis on Patreon.
2017-07-04Bootstrap.bootstrappedFrom: Avoid doing anything when not run in a chroot.Joey Hess
This way, when a disk image is built using this property, and booted up, running propellor won't try to ensure this property again. This commit was sponsored by Jeff Goeke-Smith on Patreon.
2017-07-04Bootstrap.bootstrappedFrom: Fix bug that caused propellor to only be built ↵Joey Hess
from the bootstrapped config the first time. When the config changes, the bootstrapped propellor needs to get rebuilt. This commit was sponsored by Fernando Jimenez on Patreon.
2017-07-04Diskimage.imageExists: Align disk image size to multiple of 4096 sector sizeJoey Hess
Since some programs (such as VBoxManage convertdd) refuse to operate on disk images not aligned to a sector size. This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
2017-07-04Bootstrap.clonedFrom: Fix bug that broke copying .git/config into chroot.Joey Hess
2017-06-28addJoey Hess
2017-06-20User.hasInsecurePassword makes sure shadow passwords are enabledJoey Hess
So if the insecure password is later changed, the new password won't be exposed.
2017-06-18releasing package propellor version 4.0.6Joey Hess
2017-06-18Fix bug that sometimes made --spin fail with "fatal: Couldn't find remote ↵Joey Hess
ref HEAD" Tricky stdin buffering problem. An easier fix would have been: hSetBuffering stdin NoBuffering But that approach is less robust; even with NoBuffering, anything that uses hLookAhead causes 1 byte of buffering. And, any reads from stdin before hSetBuffering would still cause the problem. Instead, I used a bigger hammer that will always work. It involves a bit more CPU work, but this is data that is already being fed through ssh; copying it one more time won't cause a measurable performance impact. This commit was sponsored by Jack Hill on Patreon.
2017-06-18Display error and warning messages to stderr, not stdout.Joey Hess
2017-06-03Switch cabal file from Extensions to Default-Extensions to fix new picky ↵Joey Hess
hackage rejection.
2017-06-03releasing package propellor version 4.0.4Joey Hess
2017-05-15mergeJoey Hess
2017-05-15Merge branch 'master' into joeyconfigJoey Hess
2017-05-15Removed dependency on MissingH, instead depends on split and hashable.Joey Hess
MissingH is a heavy dependency, which pulls in parsec and a bunch of stuff. So eliminating it makes propellor easier to install and less likely to fail to build. changesFileContent now uses hashable's hash. This may not be stable across upgrades, I'm not sure -- but it's surely ok here, as the hash is not stored. socketFile also uses hash. I *think* this is ok, even if it's not stable. If it's not stable, an upgrade might make propellor hash a hostname to a different number, but with 9 digets of number in use, the chances of a collision are small. In any case, I've opned a bug report asking for the stability to be documented, and I think it's intended to be stable, only the documentation is bad. NB: I have not checked that the arch linux and freebsd packages for the new deps, that Propellor.Bootstrap lists, are the right names or even exist. Since propellor depends on hashable, it could be changed to use unordered-containers, rather than containers, which would be faster and perhaps less deps too. This commit was sponsored by Alexander Thompson on Patreon.
2017-04-27Propellor.Property.Restic added for yet another backup program. Thanks, ↵Joey Hess
Félix Sipma.
2017-04-20releasing package propellor version 4.0.3Joey Hess
2017-04-09doneJoey Hess
2017-04-06tweaks to db45x's patchJoey Hess
Removed mountNow as a top-level property, as I don't think it makes sense for anything except for mounted to use it. db45x's patch turns out to have introduced a bug in mounted's use of "mountNow src". That made mountNow check if the device was a mount point, which it isn't. The fix would have been to use "mountNow mnt", but my inlining of mountnow just basically reverted the part of the patch that introduced the bug. swapOn does not involve the fstab so moved to the Mount module. (Also noticed that Mount.mounted is a kind of weird property, given that it fails the next time ran. It's only used internally by some chroot properties, so I left it as-is, but added a comment. It might make sense to make Mount.mounted check like mountNow does if the thing is already mounted.)
2017-03-24releasing package propellor version 4.0.2Joey Hess
2017-03-24fix diskimage finalization bugJoey Hess
* Fix bug when using setContainerProps with a chroot that prevented properties added to a chroot that way from being seen when propellor was running inside the chroot. This affected disk image creation, and possibly other things that use chroots. The problem was, propagateChrootInfo was being passed the initial version of the Chroot, but then the Chroot got more properties added, and so those were not recorded in the _chroot info. Fix was simply to make InfoPropagator be passed the Chroot as an additional parameter, so Chroot.provisioned' can pass in the final Chroot to it.