summaryrefslogtreecommitdiff
path: root/cleopatre/linux-2.6.25.10-spc300/drivers/ata/pata_sil680.c
diff options
context:
space:
mode:
Diffstat (limited to 'cleopatre/linux-2.6.25.10-spc300/drivers/ata/pata_sil680.c')
-rw-r--r--cleopatre/linux-2.6.25.10-spc300/drivers/ata/pata_sil680.c450
1 files changed, 450 insertions, 0 deletions
diff --git a/cleopatre/linux-2.6.25.10-spc300/drivers/ata/pata_sil680.c b/cleopatre/linux-2.6.25.10-spc300/drivers/ata/pata_sil680.c
new file mode 100644
index 0000000000..7c5b2dd9a1
--- /dev/null
+++ b/cleopatre/linux-2.6.25.10-spc300/drivers/ata/pata_sil680.c
@@ -0,0 +1,450 @@
+/*
+ * pata_sil680.c - SIL680 PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * based upon
+ *
+ * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
+ *
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Documentation publically available.
+ *
+ * If you have strange problems with nVidia chipset systems please
+ * see the SI support documentation and update your system BIOS
+ * if necessary
+ *
+ * TODO
+ * If we know all our devices are LBA28 (or LBA28 sized) we could use
+ * the command fifo mode.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_sil680"
+#define DRV_VERSION "0.4.8"
+
+#define SIL680_MMIO_BAR 5
+
+/**
+ * sil680_selreg - return register base
+ * @hwif: interface
+ * @r: config offset
+ *
+ * Turn a config register offset into the right address in either
+ * PCI space or MMIO space to access the control register in question
+ * Thankfully this is a configuration operation so isnt performance
+ * criticial.
+ */
+
+static unsigned long sil680_selreg(struct ata_port *ap, int r)
+{
+ unsigned long base = 0xA0 + r;
+ base += (ap->port_no << 4);
+ return base;
+}
+
+/**
+ * sil680_seldev - return register base
+ * @hwif: interface
+ * @r: config offset
+ *
+ * Turn a config register offset into the right address in either
+ * PCI space or MMIO space to access the control register in question
+ * including accounting for the unit shift.
+ */
+
+static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
+{
+ unsigned long base = 0xA0 + r;
+ base += (ap->port_no << 4);
+ base |= adev->devno ? 2 : 0;
+ return base;
+}
+
+
+/**
+ * sil680_cable_detect - cable detection
+ * @ap: ATA port
+ *
+ * Perform cable detection. The SIL680 stores this in PCI config
+ * space for us.
+ */
+
+static int sil680_cable_detect(struct ata_port *ap) {
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ unsigned long addr = sil680_selreg(ap, 0);
+ u8 ata66;
+ pci_read_config_byte(pdev, addr, &ata66);
+ if (ata66 & 1)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * sil680_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Program the SIL680 registers for PIO mode. Note that the task speed
+ * registers are shared between the devices so we must pick the lowest
+ * mode for command work.
+ */
+
+static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
+ static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
+
+ unsigned long tfaddr = sil680_selreg(ap, 0x02);
+ unsigned long addr = sil680_seldev(ap, adev, 0x04);
+ unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int pio = adev->pio_mode - XFER_PIO_0;
+ int lowest_pio = pio;
+ int port_shift = 4 * adev->devno;
+ u16 reg;
+ u8 mode;
+
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ if (pair != NULL && adev->pio_mode > pair->pio_mode)
+ lowest_pio = pair->pio_mode - XFER_PIO_0;
+
+ pci_write_config_word(pdev, addr, speed_p[pio]);
+ pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
+
+ pci_read_config_word(pdev, tfaddr-2, &reg);
+ pci_read_config_byte(pdev, addr_mask, &mode);
+
+ reg &= ~0x0200; /* Clear IORDY */
+ mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */
+
+ if (ata_pio_need_iordy(adev)) {
+ reg |= 0x0200; /* Enable IORDY */
+ mode |= 1 << port_shift;
+ }
+ pci_write_config_word(pdev, tfaddr-2, reg);
+ pci_write_config_byte(pdev, addr_mask, mode);
+}
+
+/**
+ * sil680_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Program the MWDMA/UDMA modes for the sil680 k
+ * chipset. The MWDMA mode values are pulled from a lookup table
+ * while the chipset uses mode number for UDMA.
+ */
+
+static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static u8 ultra_table[2][7] = {
+ { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */
+ { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */
+ };
+ static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ unsigned long ma = sil680_seldev(ap, adev, 0x08);
+ unsigned long ua = sil680_seldev(ap, adev, 0x0C);
+ unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+ int port_shift = adev->devno * 4;
+ u8 scsc, mode;
+ u16 multi, ultra;
+
+ pci_read_config_byte(pdev, 0x8A, &scsc);
+ pci_read_config_byte(pdev, addr_mask, &mode);
+ pci_read_config_word(pdev, ma, &multi);
+ pci_read_config_word(pdev, ua, &ultra);
+
+ /* Mask timing bits */
+ ultra &= ~0x3F;
+ mode &= ~(0x03 << port_shift);
+
+ /* Extract scsc */
+ scsc = (scsc & 0x30) ? 1: 0;
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ multi = 0x10C1;
+ ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
+ mode |= (0x03 << port_shift);
+ } else {
+ multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
+ mode |= (0x02 << port_shift);
+ }
+ pci_write_config_byte(pdev, addr_mask, mode);
+ pci_write_config_word(pdev, ma, multi);
+ pci_write_config_word(pdev, ua, ultra);
+}
+
+static struct scsi_host_template sil680_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations sil680_port_ops = {
+ .set_piomode = sil680_set_piomode,
+ .set_dmamode = sil680_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = sil680_cable_detect,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+/**
+ * sil680_init_chip - chip setup
+ * @pdev: PCI device
+ *
+ * Perform all the chip setup which must be done both when the device
+ * is powered up on boot and when we resume in case we resumed from RAM.
+ * Returns the final clock settings.
+ */
+
+static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
+{
+ u32 class_rev = 0;
+ u8 tmpbyte = 0;
+
+ pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
+ class_rev &= 0xff;
+ /* FIXME: double check */
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
+
+ pci_write_config_byte(pdev, 0x80, 0x00);
+ pci_write_config_byte(pdev, 0x84, 0x00);
+
+ pci_read_config_byte(pdev, 0x8A, &tmpbyte);
+
+ dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
+ tmpbyte & 1, tmpbyte & 0x30);
+
+ *try_mmio = 0;
+#ifdef CONFIG_PPC_MERGE
+ if (machine_is(cell))
+ *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+#endif
+
+ switch(tmpbyte & 0x30) {
+ case 0x00:
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+ break;
+ case 0x30:
+ /* if clocking is disabled */
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+ break;
+ case 0x10:
+ /* 133 already */
+ break;
+ case 0x20:
+ /* BIOS set PCI x2 clocking */
+ break;
+ }
+
+ pci_read_config_byte(pdev, 0x8A, &tmpbyte);
+ dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
+ tmpbyte & 1, tmpbyte & 0x30);
+
+ pci_write_config_byte(pdev, 0xA1, 0x72);
+ pci_write_config_word(pdev, 0xA2, 0x328A);
+ pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
+ pci_write_config_dword(pdev, 0xA8, 0x43924392);
+ pci_write_config_dword(pdev, 0xAC, 0x40094009);
+ pci_write_config_byte(pdev, 0xB1, 0x72);
+ pci_write_config_word(pdev, 0xB2, 0x328A);
+ pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
+ pci_write_config_dword(pdev, 0xB8, 0x43924392);
+ pci_write_config_dword(pdev, 0xBC, 0x40094009);
+
+ switch(tmpbyte & 0x30) {
+ case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
+ case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
+ case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
+ /* This last case is _NOT_ ok */
+ case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+ }
+ return tmpbyte & 0x30;
+}
+
+static int __devinit sil680_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ static const struct ata_port_info info = {
+ .sht = &sil680_sht,
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sil680_port_ops
+ };
+ static const struct ata_port_info info_slow = {
+ .sht = &sil680_sht,
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &sil680_port_ops
+ };
+ const struct ata_port_info *ppi[] = { &info, NULL };
+ static int printed_version;
+ struct ata_host *host;
+ void __iomem *mmio_base;
+ int rc, try_mmio;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ switch (sil680_init_chip(pdev, &try_mmio)) {
+ case 0:
+ ppi[0] = &info_slow;
+ break;
+ case 0x30:
+ return -ENODEV;
+ }
+
+ if (!try_mmio)
+ goto use_ioports;
+
+ /* Try to acquire MMIO resources and fallback to PIO if
+ * that fails
+ */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+ rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
+ if (rc)
+ goto use_ioports;
+
+ /* Allocate host and set it up */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+ host->iomap = pcim_iomap_table(pdev);
+
+ /* Setup DMA masks */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ pci_set_master(pdev);
+
+ /* Get MMIO base and initialize port addresses */
+ mmio_base = host->iomap[SIL680_MMIO_BAR];
+ host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
+ host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
+ host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
+ host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
+ ata_std_ports(&host->ports[0]->ioaddr);
+ host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
+ host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
+ host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
+ host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
+ ata_std_ports(&host->ports[1]->ioaddr);
+
+ /* Register & activate */
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &sil680_sht);
+
+use_ioports:
+ return ata_pci_init_one(pdev, ppi);
+}
+
+#ifdef CONFIG_PM
+static int sil680_reinit_one(struct pci_dev *pdev)
+{
+ int try_mmio;
+
+ sil680_init_chip(pdev, &try_mmio);
+ return ata_pci_device_resume(pdev);
+}
+#endif
+
+static const struct pci_device_id sil680[] = {
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
+
+ { },
+};
+
+static struct pci_driver sil680_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sil680,
+ .probe = sil680_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = sil680_reinit_one,
+#endif
+};
+
+static int __init sil680_init(void)
+{
+ return pci_register_driver(&sil680_pci_driver);
+}
+
+static void __exit sil680_exit(void)
+{
+ pci_unregister_driver(&sil680_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for SI680 PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sil680);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(sil680_init);
+module_exit(sil680_exit);