#ifndef avrconfig_h #define avrconfig_h /* avrconfig.h */ /* usb - USB device module using LUFA. {{{ * * Copyright (C) 2009 Nicolas Schodet * * APBTeam: * Web: http://apbteam.org/ * Email: team AT apbteam DOT org * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * }}} */ /* utils */ /** AVR Frequency : 1000000, 1843200, 2000000, 3686400, 4000000, 7372800, * 8000000, 11059200, 14745600, 16000000, 18432000, 20000000. */ #error "please check frequency" #define AC_FREQ 8000000 /* uart - UART module. */ /** Select hardware uart for primary uart: 0, 1 or -1 to disable. */ #define AC_UART0_PORT 1 /** Baudrate: 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 76800, * 115200, 230400, 250000, 500000, 1000000. */ #define AC_UART0_BAUDRATE 38400 /** Send mode: * - POLLING: no interrupts. * - RING: interrupts, ring buffer. */ #define AC_UART0_SEND_MODE RING /** Recv mode, same as send mode. */ #define AC_UART0_RECV_MODE RING /** Character size: 5, 6, 7, 8, 9 (only 8 implemented). */ #define AC_UART0_CHAR_SIZE 8 /** Parity : ODD, EVEN, NONE. */ #define AC_UART0_PARITY EVEN /** Stop bits : 1, 2. */ #define AC_UART0_STOP_BITS 1 /** Send buffer size, should be power of 2 for RING mode. */ #define AC_UART0_SEND_BUFFER_SIZE 16 /** Recv buffer size, should be power of 2 for RING mode. */ #define AC_UART0_RECV_BUFFER_SIZE 32 /** If the send buffer is full when putc: * - DROP: drop the new byte. * - WAIT: wait until there is room in the send buffer. */ #define AC_UART0_SEND_BUFFER_FULL WAIT /** In HOST compilation: * - STDIO: use stdin/out. * - PTS: use pseudo terminal. */ #define AC_UART0_HOST_DRIVER STDIO /** Same thing for secondary port. */ #define AC_UART1_PORT -1 #define AC_UART1_BAUDRATE 115200 #define AC_UART1_SEND_MODE RING #define AC_UART1_RECV_MODE RING #define AC_UART1_CHAR_SIZE 8 #define AC_UART1_PARITY EVEN #define AC_UART1_STOP_BITS 1 #define AC_UART1_SEND_BUFFER_SIZE 32 #define AC_UART1_RECV_BUFFER_SIZE 32 #define AC_UART1_SEND_BUFFER_FULL WAIT #define AC_UART1_HOST_DRIVER PTS /* spi - SPI module. */ /** Select driver: HARD, SOFT, or NONE. */ #define AC_SPI0_DRIVER SOFT /** For software SPI, specify SCK IO port. */ #define AC_SPI0_SOFT_SCK_IO D, 5 /** For software SPI, specify MOSI IO port. */ #define AC_SPI0_SOFT_MOSI_IO D, 7 /** For software SPI, specify MISO IO port. */ #define AC_SPI0_SOFT_MISO_IO D, 6 /** Same thing for an optionnal second SPI driver. */ #define AC_SPI1_DRIVER NONE /* isp - ISP module. */ /** Size of isp_frame buffer. */ #define AC_ISP_FRAME_BUFFER_SIZE 275 /** Should be implemented by the user to send a character. */ #define AC_ISP_FRAME_SEND_CHAR usb_isp_send_char /** Should be implemented by the user (isp_proto) to accept a frame. */ #define AC_ISP_FRAME_ACCEPT_FRAME isp_proto_accept /** Should be implemented by the user to send a frame. */ #define AC_ISP_PROTO_SEND isp_frame_send_frame /** Programmer signature. */ #define AC_ISP_PROTO_SIGNATURE "APBisp_2" /** Programmer build number. */ #define AC_ISP_PROTO_BUILD_NUMBER 0x0100 /** Programmer hardware version. */ #define AC_ISP_PROTO_HW_VERSION 0x02 /** Programmer software version. */ #define AC_ISP_PROTO_SW_VERSION 0x0204 /** Should be implemented by the user to enable SPI programming: * - set RESET and SCK to low, * - power on, or if not possible, do a positive RESET pulse, * - enable SPI. */ #define AC_ISP_SPI_ENABLE usb_isp_spi_enable /** Should be implemented by the user to disable SPI programming: * - disable SPI, * - release RESET, * - power off if desired. */ #define AC_ISP_SPI_DISABLE usb_isp_spi_disable /** Should be implemented by the user to do a pulse on SCK. This is used to * try to resynchronise. */ #define AC_ISP_SPI_SCK_PULSE usb_isp_spi_sck_pulse /** Should be implemented by the user to send and receive a byte using the SPI * bus. */ #define AC_ISP_SPI_TX usb_isp_spi_tx /* usb */ #include "modules/usb/lufaconfig.h" /* dev2 */ /** Set to 1 if ISP and serial pins are connected together. */ #define AC_DEV2_SERIAL_ISP_SHARED 0 #endif /* avrconfig_h */