From 74298f8ca11dc8d3b0359d1d4e124d6494c3eeac Mon Sep 17 00:00:00 2001 From: Nicolas Schodet Date: Fri, 10 Apr 2009 01:15:42 +0200 Subject: * digital/avr/modules/usb: - imported LUFA. --- digital/avr/modules/usb/lufa/LUFA/ChangeLog.txt | 387 ++++++++++++++++++++++++ 1 file changed, 387 insertions(+) create mode 100644 digital/avr/modules/usb/lufa/LUFA/ChangeLog.txt (limited to 'digital/avr/modules/usb/lufa/LUFA/ChangeLog.txt') diff --git a/digital/avr/modules/usb/lufa/LUFA/ChangeLog.txt b/digital/avr/modules/usb/lufa/LUFA/ChangeLog.txt new file mode 100644 index 00000000..41967008 --- /dev/null +++ b/digital/avr/modules/usb/lufa/LUFA/ChangeLog.txt @@ -0,0 +1,387 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_ChangeLog Project Changelog + * + * \section Sec_ChangeLog090209 Version 090209 + * + * - PWM timer mode in AudioOut demo changed to Fast PWM for speed + * - Updated Magstripe project to work with the latest hardware revision + * - Fixed library not responding to the BCERRI flag correctly in host mode, leading to device lockups + * - Fixed library handling Get Descriptor requests when not addressed as standard requests to the device or interface + * - Fixed serious data corruption issue in MassStorage demo dataflash write routine + * - Added new NO_CLEARSET_FEATURE_REQUEST compile time token + * - USB task now restores previous global interrupt state after execution, rather than forcing global interrupts to be enabled + * - Fixed USB_DeviceEnumerationComplete event firing after each configuration change, rather than once after the initial configuration + * - Added ENDPOINT_DOUBLEBANK_SUPPORTED() macros to Endpoint.h, altered ENDPOINT_MAX_SIZE() to allow user to specify endpoint + * - ENDPOINT_MAX_ENDPOINTS changed to ENDPOINT_TOTAL_ENDPOINTS, PIPE_MAX_PIPES changed to PIPE_TOTAL_PIPES + * - Endpoint and Pipe non-control stream functions now ensure endpoint or pipe is ready before reading or writing + * - Changed Teensy bootloader to use a watchdog reset when exiting rather than a software jump + * - Fixed integer promotion error in MassStorage and MassStorageHost demos, corrupting read/write transfers + * - SPI_SendByte is now SPI_TransferByte, added new SPI_SendByte and SPI_ReceiveByte functions for fast one-way transfer + * - MassStorage demo changed to use new fast one-way SPI transfers to increase throughput + * - MassStorage handling of Mass Storage Reset class request improved + * - Altered MassStorage demo dataflash block read code for speed + * - Added USB_IsSuspended global flag + * - Simplified internal Dual Mode (OTG) USB library code to reduce code size + * - Extended stream timeout period to 100ms from 50ms + * - Mass Storage Host demo commands now all return an error code from the Pipe_Stream_RW_ErrorCodes_t enum + * - Added SubErrorCode parameter to the USB_DeviceEnumerationFailed event + * - VBUS drop interrupt now disabled during the manual-to-auto VBUS delivery handoff + * - Simplified low level backend so that device/host mode initialization uses the same code paths + * - Added workaround for faulty Mass Storage devices which do not implement the required GET_MAX_LUN request + * - Removed buggy Telnet application from the RNDIS demo + * - Moved Mass Storage class requests in the Mass Storage Host demo to wrapper functions in MassStoreCommands.c + * - Fixed incorrect SCSI command size value in the Request Sense command in MassStoreCommands.c + * - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol + * - Added new "dfu" and "flip" programming targets to project makefiles + * - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful + * - Changed COLLECTION item strucutres in the HID descriptor parser to include the collection's Usage Page value + * - Serial driver now sets Tx line as output, enables pullup on Rx line + * - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled + * - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated + * - Fixed KeyboardHostWithParser demo linking against the wrong global variables + * - Completed doxygen documentation of remaining library bootloaders, demos and projects + * - Fixed incorrect bootloader start address in the TeensyHID bootloader + * - Added HWB button whole-disk ASCII dump functionality to MassStoreHost demo + * - Replaced printf_P(PSTR("%c"), {Variable}) calls with putchar() for speed and size savings + * - Serial driver now accepts baud rates over 16-bits in size, added double speed flag option + * - Fixed incorrect callback abort return value in Pipe.c + * - Added new flip-ee and dfu-ee makefile targets (courtesy of Opendous Inc.) + * - Removed reboot-on-disconnect code from the TeensyHID bootloader, caused problems on some systems + * - Fixed AudioOutput and AudioInput demos looping on the endpoint data, rather than processing a sample at a time and returning + * each time the task runs to allow for other tasks to execute + * - Added support for the Atmel ATAVRUSBRF01 board + * - Added AVRISP Programmer Project, courtesy of Opendous Inc. + * - Fixed CDC Host demo not searching through both CDC interfaces for endpoints + * - Fixed incorrect Product String descriptor length in the DFU class bootloader + * - Fixed failed descriptor searches in ConfigDescriptor.c eating the last checked descriptor when another search is started + * + * \section Sec_ChangeLog081224 Version 081224 + * + * - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs + * - Fixed Mass Storage Host demo's MassStore_SendCommand() delay in the incorrect place + * - Fixed USBtoSerial demo not calling ReconfigureUSART() after a change in the line encoding + * - Fixed infinite loop in host mode Host-to-Device control transfers with data stages + * - HID report parser now supports devices with multiple reports in one interface via Report IDs + * - Fixed RZUSBSTICK board LED driver header incorrect macro definition order causing compile errors + * - Calling USB_Init() when the USB interface is already configured now forces a complete interface reset + * and re-enumeration - fixes MyUSB DFU bootloader not switching to app code correctly when soft reset used + * - Fixed "No newline at end of file" warning when stream callbacks are enabled + * - DFU bootloader now uses fixed signature bytes per device, rather than reading them out dynamically for size + * - Added new FIXED_CONTROL_ENDPOINT_SIZE and USE_SINGLE_DEVICE_CONFIGURATION switches to statically define certain values to + * reduce compiled binary size + * - Added new NO_LIMITED_CONTROLLER_CONNECT switch to prevent the library from trying to determine bus connection + * state from the suspension and wake up events on the smaller USB AVRs + * - Added summary of all library compile time tokens to the documentation + * - Added overview of the LUFA scheduler to the documentation + * - Removed MANUAL_PLL_CONTROL compile time token, replaced with a mask for the USB_Init() Options parameter + * - CDC bootloader now uses the correct non-far or far versions of the pgm_* functions depending on if RAMPZ is defined + * - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library + * - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset + * - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices + * - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver + * - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster + * - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal + * right-handed system + * - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in + * the demos, but the example code and supporting defines are now in place + * - Interrupts are now disabled when processing a control request in device mode, to avoid exceeding the strict control request + * timing requirements. + * - All demos now use a central StatusUpdate() function rather than direct calls to the board LED functions, so that the demos can + * easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes + * - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software + * - Fixed RNDIS demo ICMP ping requests echoing back incorrect data + * - Added DHCP server code to RNDIS demo, allowing for hands-free autoconfiguration on any PC + * - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR + * - Endpoint and Pipe configuration functions now return an error code indicating success or failure + * - USB Reset in device mode now resets and disables all device endpoints + * - Added intermediate states to the host mode state machine, reducing the USB task blocking time to no more than 1ms explicitly per + * invocation when in host mode + * - Added support for the ATMEGA32U6 microcontroller + * - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage + * - Removed redudant code from the USB device GetStatus() chapter 9 processing routine + * - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/) + * - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers + * - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host + * - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist) + * rather than passing the size back to the caller through a parameter and returning a boolean + * + * \section Sec_ChangeLog153 Version 1.5.3 - Released 2nd October, 2008 + * + * - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately + * - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS) + * - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes + * - Removed serial number strings from all but the MassStore demo where it is required - users were not + * modifing the code to either ommit the descriptor or use a unique serial per device causing problems + * when multiple units of the same device were plugged in at the same time + * - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host + * - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo) + * - Added DriverStubs directory to house board level driver templates, to make MyUSB compatible custom board + * driver creation easier + * - Extended MassStorage demo to support multiple LUNs, 2 by default + * - Fixed incorrect device address mask, preventing the device from enumerating with addresses larger than 63 + * - Fixed incorrect data direction mask in the GetStatus standard request, preventing it from being handled + * - Fixed incorrect GetStatus standard request for endpoints, now returns the endpoint STALL status correctly + * - Added in new USB_RemoteWakeupEnabled and USB_CurrentlySelfPowered flags rather than using fixed values + * - Added DualCDC demo to demonstrate the use of Interface Association Descriptors + * - Added pipe NAK detection and clearing API + * - Added pipe status change (NAK, STALL, etc.) interrupt API + * - Fixed MassStorageHost demo so that it no longer freezes randomly when issuing several commands in a row + * - Host demos configuration descriptor routines now return a unique error code when the returned data does + * not have a valid configuration descriptor header + * - Added Endpoint_WaitUntilReady() and Pipe_WaitUntilReady() functions + * - Stream functions now have software timeouts, timeout period can be set by the USB_STREAM_TIMEOUT_MS token + * - All demos now pass the USB.org automated Chapter 9 device compliance tests + * - All HID demos now pass the USB.org automated HID compliance tests + * - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems + * - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks + * - Mass Storage demo dataflash management routines changed to use the endpoint stream functions + * - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file + * - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes + * are reflected in the hardware (change was previously lost) + * + * + * \section Sec_ChangeLog152 Version 1.5.2 - Released 31st July, 2008 + * + * - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types) + * - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS + * implementations (where the notification endpoint is ignored in favour of polling the control endpoint) + * - Fixed incorrect Vendor Description string return size in RNDIS demo for the OID_GEN_VENDOR_DESCRIPTION OID token + * - Added very basic TCP/IP stack and HTTP/TELNET servers to RNDIS demo + * - Fixed DFU bootloader exit causing programming software to complain about failed writes + * - Fixed DFU bootloader EEPROM programming mode wiping first flash page + * - Fixed Clear/Set Feature device standard request processing code (fixing MassStorage demo in the process) + * - Added support for the ATMEGA16U4 AVR microcontroller + * - Library licence changed from LGPLv3 to MIT license + * + * + * \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008 + * + * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event + * rather than the USB_DeviceAttached event + * - HID Usage Stack now forcefully cleared after an IN/OUT/FEATURE item has been completely processed to remove + * any referenced but not created usages + * - Changed USB_INT_DisableAllInterrupts() and USB_INT_ClearAllInterrupts(), USB_Host_GetNextDescriptorOfType(), + * USB_Host_GetNextDescriptorOfTypeBefore(), USB_Host_GetNextDescriptorOfTypeAfter() to normal functions (from inline) + * - Fixed USBtoSerial demo not sending data, only receiving + * - Fixed main makefile to make all by default, fixed MagStripe directory case to prevent case-sensitive path problems + * - ConfigDescriptor functions made normal, instead of static inline + * - Pipe/Endpoint *_Ignore_* functions changed to *_Discard_*, old names still present as aliases + * - Fixed ENDPOINT_MAX_SIZE define to be correct on limited USB controller AVRs + * - Changed endpoint and pipe size translation routines to use previous IF/ELSE IF cascade code, new algorithmic + * approach was buggy and caused problems + * - Bootloaders now compile with -fno-inline-small-functions option to reduce code size + * - Audio demos now use correct endpoint sizes for full and limited controller USB AVRs, double banking in all cases + * to be in line with the specification (isochronous endpoints MUST be double banked) + * - Added Interface Association descriptor to StdDescriptors.h, based on the relevant USB2.0 ECN + * - Fixed MIDI demo, corrected Audio Streaming descriptor to follow the MIDI-specific AS structure + * - Fixed HID class demo descriptors so that the HID interface's protocol is 0x00 (required for non-boot protocol HID + * devices) to prevent problems on hosts expecting the boot protocol functions to be supported + * - Added read/write control stream functions to Endpoint.h + * - Fixed AudioOut demo not setting port pins to inputs on USB disconnect properly + * - Added RNDISEthernet demo application + * + * + * \section Sec_ChangeLog150 Version 1.5.0 - Released 10 June, 2008 + * + * - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages + * - Added CDC Host demo application + * - Added KeyboardFullInt demo application + * - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction + * size bits not required for the routines (improves compatibility with devices) + * - Fixed AudioInput demo - now correctly sends sampled audio to the host PC + * - Fixed AudioOutput demo oncemore -- apparently Windows requires endpoint packets to be >=192 bytes + * - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes + * - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser + * - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder + * - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler + * - Added Still Image Host demo application + * - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently + * handled via interrupts while other endpoints are serviced through polling + * - Fixed device signature being sent in reverse order in the CDC bootloader + * - Host demos now have a seperate ConfigDescriptor.c/.h file for configuration descriptor processing + * - HostWithParser demos now have a seperate HIDReport.c/.h file for HID report processing and dumping + * - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value + * - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host + * - Updated demo descriptors to use VID/PID values donated by Atmel + * - Added DoxyGen documentation to the source files + * - Fixed Serial_IsCharRecieved() definition, was previously reversed + * - Removed seperate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead + * - Removed unused Device Qualifier descriptor structure + * - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged + * - Fixed MassStorageHost demo reading in the block data in reverse + * - Removed outdated typedefs in StdRequestType.h, superceeded by the macro masks + * - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products + * - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration + * - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete + * - USB_HOST_TIMEOUT_MS is now overridable in the user project makefile to a custom fixed timeout value + * - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus() + * and USB_Host_IsBusSuspended() + * - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistant, Pipe_SetInterruptFreq() is now + * Pipe_SetInterruptPeriod() to use the correct terminology + * - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC + * Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays + * of ASCII characters + * - Fixed Endpoint/Pipes being configured incorrectly if the maximum endpoint/pipe size for the selected USB AVR + * model was given as the bank size + * - HID device demos now use a true raw array for the HID report descriptor rather than a struct wrapped array + * - Added VERSION_BCD() macro, fixed reported HID and USB version numbers in demo descriptors + * - Cleaned up GetDescriptor device chapter 9 handler function + * - Added GET_REPORT class specific request to HID demos to make them complaint to the HID class + * - Cleaned up setting of USB_IsInitialized and USB_IsConnected values to only when needed + * - Removed Atomic.c and ISRMacro.h; the library was already only compatible with recent avr-lib-c for other reasons + * - All demos and library functions now use USB standardized names for the USB data (bRequest, wLength, etc.) + * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names + * + * + * \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008 + * + * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo + * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly + * - Corrected version number in Version.h + * + * + * \section Sec_ChangeLog140 Version 1.4.0 - Released 5 May, 2008 + * + * - Added HID Report Parser API to the library + * - Added Mouse and Keyboard host demo applications, using the new HID report parser engine + * - Added MouseFullInt demo, which demonstrates a fully interrupt (including control requests) mouse device + * - Fixed incorrect length value in the audio control descriptor of the AudioOutput and AudioInput demos + * - Added MIDI device demo application to the library + * - Fixed problem preventing USB devices from being resumed from a suspended state + * - Added new CDC class bootloader to the library, based on the AVR109 bootloader protocol + * - Added header to each demo application indicating the mode, class, subclass, standards used and supported speed + * - Functions expecting endpoint/pipe numbers are no longer automatically masked against ENDPOINT_EPNUM_MASK or + * PIPE_PIPENUM_MASK - this should be manually added to code which requires it + * - Fixed DFU class bootloader - corrected frequency of flash page writes, greatly reducing programming time + * - Renamed AVR_HOST_GetDeviceConfigDescriptor() to USB_Host_GetDeviceConfigDescriptor() and AVR_HOST_GetNextDescriptor() + * to USB_Host_GetNextDescriptor() + * - Added new USB_Host_GetNextDescriptorOfTypeBefore() and USB_Host_GetNextDescriptorOfTypeAfter() routines + * - Moved configuration descriptor routines to MyUSB/Drivers/USB/Class/, new accompanying ConfigDescriptors.c file + * - Added new configuration descriptor comparator API for more powerful descriptor parsing, updated host demos to use the + * new comparator API + * - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct + * big-endian for SCSI devices + * - Fixed macro/function naming consistancy; USB_HOST is now USB_Host, USB_DEV is now USB_Device + * - Added better error reporting to host demos + * - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls + * + * + * \section Sec_ChangeLog132 Version 1.3.2 - Released April 1st, 2008 + * + * - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes + * are reflected in the hardware + * - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the + * GetLineCoding request had an incorrect RequestType mask preventing it from being processed + * - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full + * - Device control endpoint size is now determined from the device's descriptors rather than being fixed + * - Seperated out SPI code into new SPI driver in AT90USBXXX driver directory + * - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID + * - Added support for the RZUSBSTICK board + * - Bicolour driver removed in favour of generic LEDs driver + * - Added support for the ATMEGA32U4 AVR + * - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL + * + * + * \section Sec_ChangeLog131 Version 1.3.1 - Released March 19th 2008 + * + * - Fixed USB to Serial demo - class value in the descriptors was incorrect + * - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low + * speed mode devices to enumerate properly + * - USB to Serial demo data endpoints changed to dual-banked 16 byte to allow the demo to work + * on USB AVRs with limited USB FIFO RAM + * - Changed demo endpoint numbers to use endpoints 3 and 4 for double banking, to allow limited + * USB device controller AVRs (AT90USB162, AT90USB82) to function correctly + * - Updated Audio Out demo to use timer 1 for AVRs lacking a timer 3 for the PWM output + * - Fixed incorrect USB_DEV_OPT_HIGHSPEED entry in the Mass Storage device demo makefile + * - Optimized Mass Storage demo for a little extra transfer speed + * - Added LED indicators to the Keyboard demo for Caps Lock, Num Lock and Scroll Lock + * - Added Endpoint_Read_Stream, Endpoint_Write_Stream, Pipe_Read_Stream and Pipe_Write_Stream functions + * (including Big and Little Endian variants) + * - Made Dataflash functions inline for speed, removed now empty Dataflash.c driver file + * - Added new SetSystemClockPrescaler() macro - thanks to Joerg Wunsch + * - Fixed Endpoint_ClearStall() to function correctly on full USB controller AVRs (AT90USBXXX6/7) + * - Endpoint_Setup_In_Clear() and Endpoint_Setup_Out_Clear() no longer set FIFOCON, in line with the + * directives in the datasheet + * - Fixed PLL prescaler defines for all AVR models and frequencies + * - Fixed ENDPOINT_INT_IN and ENDPOINT_INT_OUT definitions + * - Added interrupt driven keyboard and mouse device demos + * - Combined USB_Device_ClearFeature and USB_Device_SetFeature requests into a single routine for code + * size savings + * - Added missing Pipe_GetCurrentPipe() macro to Pipe.h + * + * + * \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008 + * + * - Unneccesary control endpoint config removed from device mode + * - Fixed device standard request interpreter accidentally processing some class-specific requests + * - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library + * to use descriptors stored in RAM or EEPROM rather than flash memory + * - All demos now disable watchdog on startup, in case it has been enabled by fuses or the bootloader + * - USB_DEV_OPT_LOWSPEED option now works correctly + * - Added ability to set the USB options statically for a binary size reduction via the USE_STATIC_OPTIONS + * compile time define + * - USB_Init no longer takes a Mode parameter if compiled for a USB device with no host mode option, or + * if forced to a particular mode via the USB_HOST_ONLY or USB_DEVICE_ONLY compile time options + * - USB_Init no longer takes an Options parameter if options statically configured by USE_STATIC_OPTIONS + * - Endpoint_Ignore_* and Pipe_Ignore_* made smaller by making the dummy variable non-volatile so that the + * compiler can throw away the result more efficiently + * - Added in an optional GroupID value to each scheduler entry, so that groups of tasks can once again be + * controlled by the new Scheduler_SetGroupTaskMode() routine + * - Added support for AT90USB162 and AT90USB82 AVR models + * - Added support for the STK525 and STK526 boards + * - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and + * placing board drivers in {Application Directory}/Board/ + * - PLL is now stopped and USB clock is frozen when detatched from host in device mode, to save power + * - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY + * - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register + * - Fixed data transfers to devices when in host mode + * - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to + * USB_HOST_IsDeviceFullSpeed() to be in line with the official USB speed names (to avoid confusion with + * the real high speed mode, which is unavailable on the USB AVRs) + * + * + * \section Sec_ChangeLog120 Version 1.2.0 - Released February 4th, 2008 + * + * - Added USB_DeviceEnumerationComplete event for host mode + * - Added new Scheduler_Init routine to preprepare the scheduler, so that tasks can be started and + * stopped before the scheduler has been started (via Scheduler_Start) + * - Connection events in both Device and Host mode are now interrupt-driven, allowing the USB management + * task to be stopped when the USB is not connected to a host or device + * - All demos updated to stop the USB task when not in use via the appropriate USB events + * - Mass Storage Host demo application updated to function correctly with all USB flash disks + * - Mass Storage Host demo application now prints out the capacity and number of LUNs in the attached + * device, and prints the first block as hexadecimal numbers rather than ASCII characters + * - Endpoint and Pipe clearing routines now clear the Endpoint/Pipe interrupt and status flags + * - Shifted error handling code in the host enum state machine to a single block, to reduce code complexity + * - Added in DESCRIPTOR_TYPE, DESCRIPTOR_SIZE and DESCRIPTOR_CAST macros to make config descriptor processing + * clearer in USB hosts and DESCRIPTOR_ADDRESS for convenience in USB devices + * - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro + * + * + * \section Sec_ChangeLog130 Version 1.1.0 - Released January 25th 2008 + * + * - Fixed DCONNI interrupt being enabled accidentally after a USB reset + * - Fixed DDISCI interrupt not being disabled when a device is not connected + * - Added workaround for powerless pullup devices causing false disconnect interrupts + * - Added USB_DeviceEnumerationFailed event for Host mode + * - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer + * pointer is passed + * - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables + * dependant on size of memory parameters passed in via the user project's makefile + * - Fixed incorrect device reset routine being called in USBTask + * - Devices which do not connect within the standard 300mS are now supported + * - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being + * started/stopped, as well as USB_InitTaskPointer(), which was breaking dual device/host USB projects + * - Changed scheduler to use the task name rather than IDs for setting the task mode, eliminating the + * need to have a task ID list + * - ID transistion interrupt now raises the appropriate device/host disconnect event if device attached + * - Fixed double VBUS change (and VBUS -) event when detatching in device mode + * - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile + * - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and + * Endpoint_IsConfigured() after calling the config functions to determine success + */ \ No newline at end of file -- cgit v1.2.3