From 74298f8ca11dc8d3b0359d1d4e124d6494c3eeac Mon Sep 17 00:00:00 2001 From: Nicolas Schodet Date: Fri, 10 Apr 2009 01:15:42 +0200 Subject: * digital/avr/modules/usb: - imported LUFA. --- .../usb/lufa/Demos/USBtoSerial/Descriptors.c | 263 ++++ .../usb/lufa/Demos/USBtoSerial/Descriptors.h | 98 ++ .../usb/lufa/Demos/USBtoSerial/Doxygen.conf | 1485 ++++++++++++++++++++ .../lufa/Demos/USBtoSerial/LUFA USBtoSerial.inf | 55 + .../modules/usb/lufa/Demos/USBtoSerial/RingBuff.c | 120 ++ .../modules/usb/lufa/Demos/USBtoSerial/RingBuff.h | 116 ++ .../usb/lufa/Demos/USBtoSerial/USBtoSerial.aps | 1 + .../usb/lufa/Demos/USBtoSerial/USBtoSerial.c | 390 +++++ .../usb/lufa/Demos/USBtoSerial/USBtoSerial.h | 192 +++ .../usb/lufa/Demos/USBtoSerial/USBtoSerial.txt | 45 + .../modules/usb/lufa/Demos/USBtoSerial/makefile | 704 ++++++++++ 11 files changed, 3469 insertions(+) create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.c create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.h create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/Doxygen.conf create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/LUFA USBtoSerial.inf create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.c create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.h create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.aps create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.c create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.h create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.txt create mode 100644 digital/avr/modules/usb/lufa/Demos/USBtoSerial/makefile (limited to 'digital/avr/modules/usb/lufa/Demos/USBtoSerial') diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.c b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.c new file mode 100644 index 00000000..03d4ed9e --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.c @@ -0,0 +1,263 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device}, + + USBSpecification: VERSION_BCD(01.10), + Class: 0x02, + SubClass: 0x00, + Protocol: 0x00, + + Endpoint0Size: 8, + + VendorID: 0x03EB, + ProductID: 0x2044, + ReleaseNumber: 0x0000, + + ManufacturerStrIndex: 0x01, + ProductStrIndex: 0x02, + SerialNumStrIndex: NO_DESCRIPTOR, + + NumberOfConfigurations: 1 +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + Config: + { + Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration}, + + TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t), + TotalInterfaces: 2, + + ConfigurationNumber: 1, + ConfigurationStrIndex: NO_DESCRIPTOR, + + ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), + + MaxPowerConsumption: USB_CONFIG_POWER_MA(100) + }, + + CCI_Interface: + { + Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface}, + + InterfaceNumber: 0, + AlternateSetting: 0, + + TotalEndpoints: 1, + + Class: 0x02, + SubClass: 0x02, + Protocol: 0x01, + + InterfaceStrIndex: NO_DESCRIPTOR + }, + + CDC_Functional_IntHeader: + { + Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24}, + SubType: 0x00, + + Data: {0x01, 0x10} + }, + + CDC_Functional_CallManagement: + { + Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24}, + SubType: 0x01, + + Data: {0x03, 0x01} + }, + + CDC_Functional_AbstractControlManagement: + { + Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24}, + SubType: 0x02, + + Data: {0x06} + }, + + CDC_Functional_Union: + { + Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24}, + SubType: 0x06, + + Data: {0x00, 0x01} + }, + + ManagementEndpoint: + { + Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, + + EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), + Attributes: EP_TYPE_INTERRUPT, + EndpointSize: CDC_NOTIFICATION_EPSIZE, + PollingIntervalMS: 0xFF + }, + + DCI_Interface: + { + Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface}, + + InterfaceNumber: 1, + AlternateSetting: 0, + + TotalEndpoints: 2, + + Class: 0x0A, + SubClass: 0x00, + Protocol: 0x00, + + InterfaceStrIndex: NO_DESCRIPTOR + }, + + DataOutEndpoint: + { + Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, + + EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), + Attributes: EP_TYPE_BULK, + EndpointSize: CDC_TXRX_EPSIZE, + PollingIntervalMS: 0x00 + }, + + DataInEndpoint: + { + Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, + + EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), + Attributes: EP_TYPE_BULK, + EndpointSize: CDC_TXRX_EPSIZE, + PollingIntervalMS: 0x00 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +USB_Descriptor_String_t PROGMEM LanguageString = +{ + Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String}, + + UnicodeString: {LANGUAGE_ID_ENG} +}; + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t PROGMEM ManufacturerString = +{ + Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String}, + + UnicodeString: L"Dean Camera" +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t PROGMEM ProductString = +{ + Header: {Size: USB_STRING_LEN(19), Type: DTYPE_String}, + + UnicodeString: L"LUFA USB-RS232 Demo" +}; + +/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = DESCRIPTOR_ADDRESS(DeviceDescriptor); + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor); + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case 0x00: + Address = DESCRIPTOR_ADDRESS(LanguageString); + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case 0x01: + Address = DESCRIPTOR_ADDRESS(ManufacturerString); + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case 0x02: + Address = DESCRIPTOR_ADDRESS(ProductString); + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.h b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.h new file mode 100644 index 00000000..bec5e40d --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Descriptors.h @@ -0,0 +1,98 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + #include + + /* Macros: */ + /** Macro to define a CDC class-specific functional descriptor. CDC functional descriptors have a + * uniform structure but variable sized data payloads, thus cannot be represented accurately by + * a single typedef struct. A macro is used instead so that functional descriptors can be created + * easily by specifying the size of the payload. This allows sizeof() to work correctly. + * + * \param DataSize Size in bytes of the CDC functional descriptor's data payload + */ + #define CDC_FUNCTIONAL_DESCRIPTOR(DataSize) \ + struct \ + { \ + USB_Descriptor_Header_t Header; \ + uint8_t SubType; \ + uint8_t Data[DataSize]; \ + } + + /** Endpoint number of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPNUM 2 + + /** Endpoint number of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPNUM 3 + + /** Endpoint number of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPNUM 4 + + /** Size in bytes of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPSIZE 8 + + /** Size in bytes of the CDC data IN and OUT endpoints. */ + #define CDC_TXRX_EPSIZE 16 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + USB_Descriptor_Interface_t CCI_Interface; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_CallManagement; + CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_AbstractControlManagement; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union; + USB_Descriptor_Endpoint_t ManagementEndpoint; + USB_Descriptor_Interface_t DCI_Interface; + USB_Descriptor_Endpoint_t DataOutEndpoint; + USB_Descriptor_Endpoint_t DataInEndpoint; + } USB_Descriptor_Configuration_t; + + /* Function Prototypes: */ + uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Doxygen.conf b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Doxygen.conf new file mode 100644 index 00000000..1eb8c543 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/Doxygen.conf @@ -0,0 +1,1485 @@ +# Doxyfile 1.5.7.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "LUFA Library - USB to Serial Device Demo" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = 0.0.0 + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = YES + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, +# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, +# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, +# Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by +# doxygen. The layout file controls the global structure of the generated output files +# in an output format independent way. The create the layout file that represents +# doxygen's defaults, run doxygen with the -l option. You can optionally specify a +# file name after the option, if omitted DoxygenLayout.xml will be used as the name +# of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = */LowLevel/USBMode.h + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = __* + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentstion. + +REFERENCES_LINK_SOURCE = NO + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = YES + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER +# are set, an additional index file will be generated that can be used as input for +# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated +# HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# Qt Help Project / Namespace. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# Qt Help Project / Virtual Folders. + +QHP_VIRTUAL_FOLDER = doc + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file . + +QHG_LOCATION = + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 1 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to FRAME, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. Other possible values +# for this tag are: HIERARCHIES, which will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list; +# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which +# disables this behavior completely. For backwards compatibility with previous +# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE +# respectively. + +GENERATE_TREEVIEW = YES + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = __DOXYGEN__ + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = BUTTLOADTAG + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = NO + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = NO + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = NO + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = NO + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = NO + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = NO + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = "C:/Program Files/Graphviz2.18/bin" + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 15 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 2 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/LUFA USBtoSerial.inf b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/LUFA USBtoSerial.inf new file mode 100644 index 00000000..bd9c8bf1 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/LUFA USBtoSerial.inf @@ -0,0 +1,55 @@ +; Windows LUFA USB to Serial Setup File +; Copyright (c) 2000 Microsoft Corporation + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%COMPANY% +LayoutFile=layout.inf +DriverVer=06/06/2006,1.0.0.0 + +[Manufacturer] +%MFGNAME% = ManufName + +[DestinationDirs] +DefaultDestDir=12 + +[ManufName] +%Modem3% = Modem3, USB\VID_03EB&PID_204B + +;------------------------------------------------------------------------------ +; Windows 2000/XP Sections +;------------------------------------------------------------------------------ + +[Modem3.nt] +CopyFiles=USBModemCopyFileSection +AddReg=Modem3.nt.AddReg + +[USBModemCopyFileSection] +usbser.sys,,,0x20 + +[Modem3.nt.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,usbser.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[Modem3.nt.Services] +AddService=usbser, 0x00000002, DriverService + +[DriverService] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\usbser.sys + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ + +[Strings] +COMPANY="LUFA Library" +MFGNAME="Dean Camera" +Modem3="USB Virtual Serial Port" +SERVICE="USB Virtual Serial Port CDC Driver" \ No newline at end of file diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.c b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.c new file mode 100644 index 00000000..1f477f17 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.c @@ -0,0 +1,120 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "RingBuff.h" + +void Buffer_Initialize(RingBuff_t* Buffer) +{ + BUFF_ATOMIC_BLOCK + { + Buffer->InPtr = (RingBuff_Data_t*)&Buffer->Buffer; + Buffer->OutPtr = (RingBuff_Data_t*)&Buffer->Buffer; + Buffer->Elements = 0; + } +} + +void Buffer_StoreElement(RingBuff_t* Buffer, RingBuff_Data_t Data) +{ + BUFF_ATOMIC_BLOCK + { + #if defined(BUFF_DROPOLD) + if (Buffer->Elements == BUFF_LENGTH) + { + Buffer->OutPtr++; + + if (Buffer->OutPtr == &Buffer->Buffer[BUFF_LENGTH]) + Buffer->OutPtr = (RingBuff_Data_t*)&Buffer->Buffer; + } + else + { + Buffer->Elements++; + } + #elif defined(BUFF_DROPNEW) + if (Buffer->Elements == BUFF_LENGTH) + return; + + Buffer->Elements++; + #elif defined(BUFF_NODROPCHECK) + Buffer->Elements++; + #endif + + *(Buffer->InPtr) = Data; + Buffer->InPtr++; + + if (Buffer->InPtr == &Buffer->Buffer[BUFF_LENGTH]) + Buffer->InPtr = (RingBuff_Data_t*)&Buffer->Buffer; + } +} + +RingBuff_Data_t Buffer_GetElement(RingBuff_t* Buffer) +{ + RingBuff_Data_t BuffData; + + BUFF_ATOMIC_BLOCK + { +#if defined(BUFF_EMPTYRETURNSZERO) + if (!(Buffer->Elements)) + return 0; +#elif !defined(BUFF_NOEMPTYCHECK) + #error No empty buffer check behaviour specified. +#endif + + BuffData = *(Buffer->OutPtr); + + Buffer->OutPtr++; + Buffer->Elements--; + + if (Buffer->OutPtr == &Buffer->Buffer[BUFF_LENGTH]) + Buffer->OutPtr = (RingBuff_Data_t*)&Buffer->Buffer; + } + + return BuffData; +} + +#if defined(BUFF_USEPEEK) +RingBuff_Data_t Buffer_PeekElement(const RingBuff_t* Buffer) +{ + RingBuff_Data_t BuffData; + + BUFF_ATOMIC_BLOCK + { +#if defined(BUFF_EMPTYRETURNSZERO) + if (!(Buffer->Elements)) + return 0; +#elif !defined(BUFF_NOEMPTYCHECK) + #error No empty buffer check behaviour specified. +#endif + + BuffData = *(Buffer->OutPtr); + } + + return BuffData; +} +#endif diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.h b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.h new file mode 100644 index 00000000..4b6bfde6 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/RingBuff.h @@ -0,0 +1,116 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/* Buffer Configuration: */ + /* Buffer length - select static size of created ringbuffers: */ + #define BUFF_STATICSIZE 128 // Set to the static ringbuffer size for all ringbuffers (place size after define) + + /* Volatile mode - uncomment to make buffers volatile, for use in ISRs, etc: */ + #define BUFF_VOLATILE // Uncomment to cause all ring buffers to become volatile (and atomic if multi-byte) in access + + /* Drop mode - select behaviour when Buffer_StoreElement called on a full buffer: */ + #define BUFF_DROPOLD // Uncomment to cause full ring buffers to drop the oldest character to make space when full + // #define BUFF_DROPNEW // Uncomment to cause full ring buffers to drop the new character when full + // #define BUFF_NODROPCHECK // Uncomment to ignore full ring buffer checks - checking left to user! + + /* Underflow behaviour - select behaviour when Buffer_GetElement is called with an empty ringbuffer: */ + //#define BUFF_EMPTYRETURNSZERO // Uncomment to return 0 when an empty ringbuffer is read + #define BUFF_NOEMPTYCHECK // Uncomment to disable checking of empty ringbuffers - checking left to user! + + /* Buffer storage type - set the datatype for the stored data */ + #define BUFF_DATATYPE uint8_t // Change to the data type that is going to be stored into the buffer + + /* Peek routine - uncomment to include the peek routine (fetches next byte without removing it from the buffer */ + //#define BUFF_USEPEEK + +#ifndef _RINGBUFF_H_ +#define _RINGBUFF_H_ + + /* Includes: */ + #include + #include + #include + #include + + #include + + /* Defines and checks: */ + #if defined(BUFF_STATICSIZE) + #define BUFF_LENGTH BUFF_STATICSIZE + #else + #error No buffer length specified! + #endif + + #if !(defined(BUFF_DROPOLD) || defined(BUFF_DROPNEW) || defined(BUFF_NODROPCHECK)) + #error No buffer drop mode specified. + #endif + + #if !defined(BUFF_DATATYPE) + #error Ringbuffer storage data type not specified. + #endif + + #if defined(BUFF_VOLATILE) + #define BUFF_MODE volatile + #define BUFF_ATOMIC_BLOCK ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + #else + #define BUFF_MODE + #define BUFF_ATOMIC_BLOCK + #endif + + #if (BUFF_STATICSIZE > LONG_MAX) + #define RingBuff_Elements_t uint64_t + #elif (BUFF_STATICSIZE > INT_MAX) + #define RingBuff_Elements_t uint32_t + #elif (BUFF_STATICSIZE > CHAR_MAX) + #define RingBuff_Elements_t uint16_t + #else + #define RingBuff_Elements_t uint8_t + #endif + + /* Type Defines: */ + typedef BUFF_DATATYPE RingBuff_Data_t; + + typedef BUFF_MODE struct + { + RingBuff_Data_t Buffer[BUFF_LENGTH]; + RingBuff_Data_t* InPtr; + RingBuff_Data_t* OutPtr; + RingBuff_Elements_t Elements; + } RingBuff_t; + + /* Function Prototypes: */ + void Buffer_Initialize(RingBuff_t* Buff); + void Buffer_StoreElement(RingBuff_t* Buffer, RingBuff_Data_t Data); + RingBuff_Data_t Buffer_GetElement(RingBuff_t* Buffer); + #if defined(BUFF_USEPEEK) + RingBuff_Data_t Buffer_PeekElement(const RingBuff_t* Buffer); + #endif + +#endif diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.aps b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.aps new file mode 100644 index 00000000..2db4f97b --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.aps @@ -0,0 +1 @@ +USBtoSerial30-Sep-2008 14:18:3930-Sep-2008 14:18:52241030-Sep-2008 14:18:3944, 14, 0, 589AVR GCCC:\Users\Dean\Documents\Electronics\Projects\WORK\MyUSBWORK\Demos\USBtoSerial\falseR00R01R02R03R04R05R06R07R08R09R10R11R12R13R14R15R16R17R18R19R20R21R22R23R24R25R26R27R28R29R30R31Auto000Descriptors.cRingBuff.cUSBtoSerial.cDescriptors.hRingBuff.hUSBtoSerial.hmakefiledefaultYESmakefileatmega128111USBtoSerial.elfdefault\1-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enumsdefault1C:\WinAVR-20080512\bin\avr-gcc.exeC:\WinAVR-20080512\utils\bin\make.exe diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.c b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.c new file mode 100644 index 00000000..7c06007a --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.c @@ -0,0 +1,390 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "USBtoSerial.h" + +/* Project Tags, for reading out using the ButtLoad project */ +BUTTLOADTAG(ProjName, "LUFA USB RS232 App"); +BUTTLOADTAG(BuildTime, __TIME__); +BUTTLOADTAG(BuildDate, __DATE__); +BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING); + +/* Scheduler Task List */ +TASK_LIST +{ + { Task: USB_USBTask , TaskStatus: TASK_STOP }, + { Task: CDC_Task , TaskStatus: TASK_STOP }, +}; + +/* Globals: */ +/** Contains the current baud rate and other settings of the virtual serial port. + * + * These values are set by the host via a class-specific request, and the physical USART should be reconfigured to match the + * new settings each time they are changed by the host. + */ +CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600, + CharFormat: OneStopBit, + ParityType: Parity_None, + DataBits: 8 }; + +/** Ring (circular) buffer to hold the RX data - data from the host to the attached device on the serial port. */ +RingBuff_t Rx_Buffer; + +/** Ring (circular) buffer to hold the TX data - data from the attached device on the serial port to the host. */ +RingBuff_t Tx_Buffer; + +/** Flag to indicate if the USART is currently transmitting data from the Rx_Buffer circular buffer. */ +volatile bool Transmitting = false; + +/** Main program entry point. This routine configures the hardware required by the application, then + * starts the scheduler to run the application tasks. + */ +int main(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable Clock Division */ + SetSystemClockPrescaler(0); + + /* Hardware Initialization */ + LEDs_Init(); + ReconfigureUSART(); + + /* Ringbuffer Initialization */ + Buffer_Initialize(&Rx_Buffer); + Buffer_Initialize(&Tx_Buffer); + + /* Indicate USB not ready */ + UpdateStatus(Status_USBNotReady); + + /* Initialize Scheduler so that it can be used */ + Scheduler_Init(); + + /* Initialize USB Subsystem */ + USB_Init(); + + /* Scheduling - routine never returns, so put this last in the main function */ + Scheduler_Start(); +} + +/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and + * starts the library USB task to begin the enumeration and USB management process. + */ +EVENT_HANDLER(USB_Connect) +{ + /* Start USB management task */ + Scheduler_SetTaskMode(USB_USBTask, TASK_RUN); + + /* Indicate USB enumerating */ + UpdateStatus(Status_USBEnumerating); +} + +/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via + * the status LEDs and stops the USB management and CDC management tasks. + */ +EVENT_HANDLER(USB_Disconnect) +{ + /* Stop running CDC and USB management tasks */ + Scheduler_SetTaskMode(CDC_Task, TASK_STOP); + Scheduler_SetTaskMode(USB_USBTask, TASK_STOP); + + /* Indicate USB not ready */ + UpdateStatus(Status_USBNotReady); +} + +/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration + * of the USB device after enumeration - the device endpoints are configured and the CDC management task started. + */ +EVENT_HANDLER(USB_ConfigurationChanged) +{ + /* Setup CDC Notification, Rx and Tx Endpoints */ + Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, + ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE, + ENDPOINT_BANK_SINGLE); + + Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, + ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE, + ENDPOINT_BANK_SINGLE); + + Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, + ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE, + ENDPOINT_BANK_SINGLE); + + /* Indicate USB connected and ready */ + UpdateStatus(Status_USBReady); + + /* Start CDC task */ + Scheduler_SetTaskMode(CDC_Task, TASK_RUN); +} + +/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific + * control requests that are not handled internally by the USB library (including the CDC control commands, + * which are all issued via the control endpoint), so that they can be handled appropriately for the application. + */ +EVENT_HANDLER(USB_UnhandledControlPacket) +{ + uint8_t* LineCodingData = (uint8_t*)&LineCoding; + + /* Process CDC specific control requests */ + switch (bRequest) + { + case REQ_GetLineEncoding: + if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + /* Acknowedge the SETUP packet, ready for data transfer */ + Endpoint_ClearSetupReceived(); + + /* Write the line coding data to the control endpoint */ + Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(LineCoding)); + + /* Finalize the stream transfer to send the last packet or clear the host abort */ + Endpoint_ClearSetupOUT(); + } + + break; + case REQ_SetLineEncoding: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + /* Acknowedge the SETUP packet, ready for data transfer */ + Endpoint_ClearSetupReceived(); + + /* Read the line coding data in from the host into the global struct */ + Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(LineCoding)); + + /* Finalize the stream transfer to clear the last packet from the host */ + Endpoint_ClearSetupIN(); + + /* Reconfigure the USART with the new settings */ + ReconfigureUSART(); + } + + break; + case REQ_SetControlLineState: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { +#if 0 + /* NOTE: Here you can read in the line state mask from the host, to get the current state of the output handshake + lines. The mask is read in from the wValue parameter, and can be masked against the CONTROL_LINE_OUT_* masks + to determine the RTS and DTR line states using the following code: + */ + + uint16_t wIndex = Endpoint_Read_Word_LE(); + + // Do something with the given line states in wIndex +#endif + + /* Acknowedge the SETUP packet, ready for data transfer */ + Endpoint_ClearSetupReceived(); + + /* Send an empty packet to acknowedge the command */ + Endpoint_ClearSetupIN(); + } + + break; + } +} + +/** Task to manage CDC data transmission and reception to and from the host, from and to the physical USART. */ +TASK(CDC_Task) +{ + if (USB_IsConnected) + { +#if 0 + /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232 + handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code: + */ + + USB_Notification_Header_t Notification = (USB_Notification_Header_t) + { + NotificationType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE), + Notification: NOTIF_SerialState, + wValue: 0, + wIndex: 0, + wLength: sizeof(uint16_t), + }; + + uint16_t LineStateMask; + + // Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host + + Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); + Endpoint_Write_Stream_LE(&Notification, sizeof(Notification)); + Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask)); + Endpoint_ClearCurrentBank(); +#endif + + /* Select the Serial Rx Endpoint */ + Endpoint_SelectEndpoint(CDC_RX_EPNUM); + + if (Endpoint_ReadWriteAllowed()) + { + /* Read the received data endpoint into the transmission buffer */ + while (Endpoint_BytesInEndpoint()) + { + /* Wait until the buffer has space for a new character */ + while (!((BUFF_STATICSIZE - Rx_Buffer.Elements))); + + /* Store each character from the endpoint */ + Buffer_StoreElement(&Rx_Buffer, Endpoint_Read_Byte()); + } + + /* Clear the endpoint buffer */ + Endpoint_ClearCurrentBank(); + } + + /* Check if Rx buffer contains data */ + if (Rx_Buffer.Elements) + { + /* Initiate the transmission of the buffer contents if USART idle */ + if (!(Transmitting)) + { + Transmitting = true; + Serial_TxByte(Buffer_GetElement(&Rx_Buffer)); + } + } + + /* Select the Serial Tx Endpoint */ + Endpoint_SelectEndpoint(CDC_TX_EPNUM); + + /* Check if the Tx buffer contains anything to be sent to the host */ + if (Tx_Buffer.Elements) + { + /* Wait until Serial Tx Endpoint Ready for Read/Write */ + while (!(Endpoint_ReadWriteAllowed())); + + /* Check before sending the data if the endpoint is completely full */ + bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE); + + /* Write the transmission buffer contents to the received data endpoint */ + while (Tx_Buffer.Elements && (Endpoint_BytesInEndpoint() < CDC_TXRX_EPSIZE)) + Endpoint_Write_Byte(Buffer_GetElement(&Tx_Buffer)); + + /* Send the data */ + Endpoint_ClearCurrentBank(); + + /* If a full endpoint was sent, we need to send an empty packet afterwards to terminate the transfer */ + if (IsFull) + { + /* Wait until Serial Tx Endpoint Ready for Read/Write */ + while (!(Endpoint_ReadWriteAllowed())); + + /* Send an empty packet to terminate the transfer */ + Endpoint_ClearCurrentBank(); + } + } + } +} + +/** ISR to handle the USART transmit complete interrupt, fired each time the USART has sent a character. This reloads the USART + * data register with the next byte from the Rx_Buffer circular buffer if a character is available, or stops the transmission if + * the buffer is currently empty. + */ +ISR(USART1_TX_vect, ISR_BLOCK) +{ + /* Send next character if available */ + if (Rx_Buffer.Elements) + UDR1 = Buffer_GetElement(&Rx_Buffer); + else + Transmitting = false; +} + +/** ISR to handle the USART receive complete interrupt, fired each time the USART has received a character. This stores the received + * character into the Tx_Buffer circular buffer for later transmission to the host. + */ +ISR(USART1_RX_vect, ISR_BLOCK) +{ + /* Character received, store it into the buffer */ + Buffer_StoreElement(&Tx_Buffer, UDR1); +} + +/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to + * log to a serial port, or anything else that is suitable for status updates. + * + * \param CurrentStatus Current status of the system, from the USBtoSerial_StatusCodes_t enum + */ +void UpdateStatus(uint8_t CurrentStatus) +{ + uint8_t LEDMask = LEDS_NO_LEDS; + + /* Set the LED mask to the appropriate LED mask based on the given status code */ + switch (CurrentStatus) + { + case Status_USBNotReady: + LEDMask = (LEDS_LED1); + break; + case Status_USBEnumerating: + LEDMask = (LEDS_LED1 | LEDS_LED2); + break; + case Status_USBReady: + LEDMask = (LEDS_LED2 | LEDS_LED4); + break; + } + + /* Set the board LEDs to the new LED mask */ + LEDs_SetAllLEDs(LEDMask); +} + +/** Reconfigures the USART to match the current serial port settings issued by the host as closely as possible. */ +void ReconfigureUSART(void) +{ + uint8_t ConfigMask = 0; + + /* Determine parity - non odd/even parity mode defaults to no parity */ + if (LineCoding.ParityType == Parity_Odd) + ConfigMask = ((1 << UPM11) | (1 << UPM10)); + else if (LineCoding.ParityType == Parity_Even) + ConfigMask = (1 << UPM11); + + /* Determine stop bits - 1.5 stop bits is set as 1 stop bit due to hardware limitations */ + if (LineCoding.CharFormat == TwoStopBits) + ConfigMask |= (1 << USBS1); + + /* Determine data size - 5, 6, 7, or 8 bits are supported */ + if (LineCoding.DataBits == 6) + ConfigMask |= (1 << UCSZ10); + else if (LineCoding.DataBits == 7) + ConfigMask |= (1 << UCSZ11); + else if (LineCoding.DataBits == 8) + ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); + + /* Enable double speed, gives better error percentages at 8MHz */ + UCSR1A = (1 << U2X1); + + /* Enable transmit and receive modules and interrupts */ + UCSR1B = ((1 << TXCIE1) | (1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); + + /* Set the USART mode to the mask generated by the Line Coding options */ + UCSR1C = ConfigMask; + + /* Set the USART baud rate register to the desired baud rate value */ + UBRR1 = SERIAL_2X_UBBRVAL((uint16_t)LineCoding.BaudRateBPS); +} diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.h b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.h new file mode 100644 index 00000000..f363fa93 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.h @@ -0,0 +1,192 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for USBtoSerial.c. + */ + +#ifndef _USB_SERIAL_H_ +#define _USB_SERIAL_H_ + + /* Includes: */ + #include + #include + #include + + #include "Descriptors.h" + #include "RingBuff.h" + + #include // Library Version Information + #include // PROGMEM tags readable by the ButtLoad project + #include // USB Functionality + #include // USART driver + #include // LEDs driver + #include // Simple scheduler for task management + + /* Macros: */ + /** CDC Class specific request to get the current virtual serial port configuration settings. */ + #define REQ_GetLineEncoding 0x21 + + /** CDC Class specific request to set the current virtual serial port configuration settings. */ + #define REQ_SetLineEncoding 0x20 + + /** CDC Class specific request to set the current virtual serial port handshake line states. */ + #define REQ_SetControlLineState 0x22 + + /** Notification type constant for a change in the virtual serial port handshake line states, for + * use with a USB_Notification_Header_t notification structure when sent to the host via the CDC + * notification endpoint. + */ + #define NOTIF_SerialState 0x20 + + /** Mask for the DTR handshake line for use with the REQ_SetControlLineState class specific request + * from the host, to indicate that the DTR line state should be high. + */ + #define CONTROL_LINE_OUT_DTR (1 << 0) + + /** Mask for the RTS handshake line for use with the REQ_SetControlLineState class specific request + * from the host, to indicate that theRTS line state should be high. + */ + #define CONTROL_LINE_OUT_RTS (1 << 1) + + /** Mask for the DCD handshake line for use with the a NOTIF_SerialState class specific notification + * from the device to the host, to indicate that the DCD line state is currently high. + */ + #define CONTROL_LINE_IN_DCD (1 << 0) + + /** Mask for the DSR handshake line for use with the a NOTIF_SerialState class specific notification + * from the device to the host, to indicate that the DSR line state is currently high. + */ + #define CONTROL_LINE_IN_DSR (1 << 1) + + /** Mask for the BREAK handshake line for use with the a NOTIF_SerialState class specific notification + * from the device to the host, to indicate that the BREAK line state is currently high. + */ + #define CONTROL_LINE_IN_BREAK (1 << 2) + + /** Mask for the RING handshake line for use with the a NOTIF_SerialState class specific notification + * from the device to the host, to indicate that the RING line state is currently high. + */ + #define CONTROL_LINE_IN_RING (1 << 3) + + /** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host, + * to indicate that a framing error has ocurred on the virtual serial port. + */ + #define CONTROL_LINE_IN_FRAMEERROR (1 << 4) + + /** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host, + * to indicate that a parity error has ocurred on the virtual serial port. + */ + #define CONTROL_LINE_IN_PARITYERROR (1 << 5) + + /** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host, + * to indicate that a data overrun error has ocurred on the virtual serial port. + */ + #define CONTROL_LINE_IN_OVERRUNERROR (1 << 6) + + /* Event Handlers: */ + /** Indicates that this module will catch the USB_Connect event when thrown by the library. */ + HANDLES_EVENT(USB_Connect); + + /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */ + HANDLES_EVENT(USB_Disconnect); + + /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */ + HANDLES_EVENT(USB_ConfigurationChanged); + + /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */ + HANDLES_EVENT(USB_UnhandledControlPacket); + + /* Type Defines: */ + /** Type define for the virtual serial port line encoding settings, for storing the current USART configuration + * as set by the host via a class specific request. + */ + typedef struct + { + uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */ + uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the + * CDCDevice_CDC_LineCodingFormats_t enum + */ + uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the + * CDCDevice_LineCodingParity_t enum + */ + uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */ + } CDC_Line_Coding_t; + + /** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a + * change in the device state asynchronously. + */ + typedef struct + { + uint8_t NotificationType; /**< Notification type, a mask of REQDIR_*, REQTYPE_* and REQREC_* constants + * from the library StdRequestType.h header + */ + uint8_t Notification; /**< Notification value, a NOTIF_* constant */ + uint16_t wValue; /**< Notification wValue, notification-specific */ + uint16_t wIndex; /**< Notification wIndex, notification-specific */ + uint16_t wLength; /**< Notification wLength, notification-specific */ + } USB_Notification_Header_t; + + /* Enums: */ + /** Enum for the possible line encoding formats of a virtual serial port. */ + enum CDCDevice_CDC_LineCodingFormats_t + { + OneStopBit = 0, /**< Each frame contains one stop bit */ + OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits */ + TwoStopBits = 2, /**< Each frame contains two stop bits */ + }; + + /** Enum for the possible line encoding parity settings of a virtual serial port. */ + enum CDCDevice_LineCodingParity_t + { + Parity_None = 0, /**< No parity bit mode on each frame */ + Parity_Odd = 1, /**< Odd parity bit mode on each frame */ + Parity_Even = 2, /**< Even parity bit mode on each frame */ + Parity_Mark = 3, /**< Mark parity bit mode on each frame */ + Parity_Space = 4, /**< Space parity bit mode on each frame */ + }; + + /** Enum for the possible status codes for passing to the UpdateStatus() function. */ + enum USBtoSerial_StatusCodes_t + { + Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB host) */ + Status_USBEnumerating = 1, /**< USB interface is enumerating */ + Status_USBReady = 2, /**< USB interface is connected and ready */ + }; + + /* Tasks: */ + TASK(CDC_Task); + + /* Function Prototypes: */ + void ReconfigureUSART(void); + void UpdateStatus(uint8_t CurrentStatus); + +#endif diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.txt b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.txt new file mode 100644 index 00000000..992f00f4 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/USBtoSerial.txt @@ -0,0 +1,45 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage USB to Serial Converter Demo (via CDC-ACM class) + * + * Communications Device Class demonstration application. + * This gives a simple reference application for implementing + * a USB to Serial converter using the CDC class. Sent and + * received data on the serial port is communicated to the USB + * host. + * + * After running this demo for the first time on a new computer, + * you will need to supply the .INF file located in this demo + * project's directory as the device's driver when running under + * Windows. This will enable Windows to use its inbuilt CDC drivers, + * negating the need for custom drivers for the device. Other + * Operating Systems should automatically use their own inbuilt + * CDC-ACM drivers. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
+ */ \ No newline at end of file diff --git a/digital/avr/modules/usb/lufa/Demos/USBtoSerial/makefile b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/makefile new file mode 100644 index 00000000..ad91aa81 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/USBtoSerial/makefile @@ -0,0 +1,704 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = at90usb1287 + + +# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = USBKEY + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# Typical values are: +# F_CPU = 1000000 +# F_CPU = 1843200 +# F_CPU = 2000000 +# F_CPU = 3686400 +# F_CPU = 4000000 +# F_CPU = 7372800 +# F_CPU = 8000000 +# F_CPU = 11059200 +# F_CPU = 14745600 +# F_CPU = 16000000 +# F_CPU = 18432000 +# F_CPU = 20000000 +F_CPU = 8000000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = USBtoSerial + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + Descriptors.c \ + RingBuff.c \ + ../../LUFA/Scheduler/Scheduler.c \ + ../../LUFA/Drivers/AT90USBXXX/Serial.c \ + ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \ + ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \ + ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \ + ../../LUFA/Drivers/USB/HighLevel/USBTask.c \ + ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \ + ../../LUFA/Drivers/USB/HighLevel/Events.c \ + ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \ + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = ../../ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL -DBOARD=BOARD_$(BOARD) -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS +CDEFS += -DUSB_DEVICE_ONLY -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) + + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -finline-limit=20 +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +CFLAGS += -Wundef +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware: alf avr910 avrisp bascom bsd +# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 +# +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = jtagmkII + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +checkhooks: build + @echo + @echo ------- Unhooked LUFA Events ------- + @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \ + cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ + echo "(None)" + @echo ----- End Unhooked LUFA Events ----- + +checklibmode: + @echo + @echo ----------- Library Mode ----------- + @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ + | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ + || echo "No specific mode (both device and host mode allowable)." + @echo ------------------------------------ + +# Display compiler version information. +gccversion : + @$(CC) --version + + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU) -operation erase f + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) reset + +flip-ee: $(TARGET).hex $(TARGET).eep + mv $(TARGET).eep $(TARGET)eep.hex + batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase F memory FLASH erase F + batchisp -hardware usb -device $(MCU) -operation memory EEPROM + loadbuffer $(TARGET)eep.hex memory FLASH loadbuffer $(TARGET).hex + program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu-ee: $(TARGET).hex $(TARGET).eep + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep + dfu-programmer $(MCU) reset + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -z -S $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list clean_binary end + +clean_binary: + $(REMOVE) $(TARGET).hex + +clean_list: + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + + +doxygen: + @echo Generating Project Documentation... + @doxygen Doxygen.conf + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all checkhooks checklibmode begin \ +finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff \ +clean clean_list clean_binary program debug \ +gdb-config doxygen dfu flip -- cgit v1.2.3