path: root/digital/dev2
AgeCommit message (Collapse)Author
2013-04-13digital/dev2: use serial commands to speed up SWD communicationsNicolas Schodet
2013-04-13digital/dev2/src/common/gpio: disable pull-up for inputsNicolas Schodet
When switching to input, an old PORTD content could activate pull-up.
2013-04-07digital/dev2/src: add ISP/serial shared modeNicolas Schodet
2013-04-06digital/dev2/doc: add doc on Black Magic Probe usageNicolas Schodet
2013-04-03digital/dev2/tools/blackmagic: use blackmagic for SWD support with dev2Nicolas Schodet
2013-04-03digital/dev2/src/usb_serial_isp: added shared GPIO modeNicolas Schodet
2013-03-28digital/dev2/src: add gpio binary protocolNicolas Schodet
2013-03-28digital/dev2/src: move gpio code to commonNicolas Schodet
2013-01-26digital/dev2/tools: support old VID/PID to help transitionNicolas Schodet
2013-01-26digital/dev2: set serial speed at runtimeNicolas Schodet
2012-12-23digital: use Openmoko donated USB VID & PIDNicolas Schodet
2012-03-18digital/dev2/doc: add udev ruleNicolas Schodet
2011-06-23digital/dev2/src: add #error to avoid programming with the bad clock settingNicolas Schodet
2011-04-08digital: batchpcb orderNicolas Schodet
2011-04-07digital/cms-intro, digital/dev2: fix quartz valueNicolas Schodet
2011-04-07digital/dev2: new dev2-lightNicolas Schodet
2010-11-29digital/dev2: add TWI master moduleNicolas Schodet
2010-11-29digital/dev2/src/usb_gpio: remove unused uart configurationNicolas Schodet
2010-07-01digital/dev2/doc: document dev2 usage, closes #132Nicolas Schodet
2010-04-01digital/dev2/doc: add dev2 documentationNicolas Schodet
2009-04-25 * digital/dev2:Nicolas Schodet
- added real ISP.
2009-04-17 * digital/dev2/src/usb_serial_isp:Nicolas Schodet
- added isp calls.
2009-04-10 * digital/dev2:Nicolas Schodet
- added dev2gpio.
2009-04-10 * digital/dev2:Nicolas Schodet
- added usb_serial_isp, no isp yet.
2009-01-19 * digital/dev2/pcb:Nicolas Schodet
- last details (no solder mask under vreg, gnd vias, text).
2009-01-15 * digital/dev2/pcb:Nicolas Schodet
- routed!
2009-01-10 * digital/dev2/pcb:Nicolas Schodet
- more routing.
2009-01-09 * digital/dev2/pcb:Nicolas Schodet
- hand-routing.
2009-01-09 * digital/dev2/pcb:Nicolas Schodet
- fixed DRC mistakes. - added supply traces.
2009-01-09 * digital/dev2/pcb:Nicolas Schodet
- reordered mux signals.
2009-01-09 * digital/dev2/pcb:Nicolas Schodet
- moved ethernet control down. - pre-routed critical signals. - pre-routed ext power. - placed 3V3 regulator and its plane heat sink. - rotated DEV connectors.
2009-01-05 * digital/dev2/pcb:Nicolas Schodet
- changed 3.3V regulator. - shortened oscillator track. - removed diode on VBUS. - added MTA connector. - fixed quartz value.
2008-12-10 * digital/dev2/pcbJérémy Dufour
- move multiplexors more on the left, - reverse multiplexors, - routing still ongoing...
2008-12-10 * digital/dev2/pcbJérémy Dufour
- move Ethernet chip to top, - update libraries for clearance of Ethernet and AVR chip, - pre-routing of important nets.
2008-12-10 * digital/dev2/pcbJérémy Dufour
- reduce net class vias size for Ethernet, - move leds to pass DRC.
2008-12-09 * digital/dev2/pcbJérémy Dufour
- first placement.
2008-12-09 * digital/dev2/pcbJérémy Dufour
- increase tracks width for Ethernet.
2008-12-08 * digital/dev2/pcb:Nicolas Schodet
- ready to be routed.
2008-12-07 * digital/dev2/pcb:Nicolas Schodet
- added pull-up and protection resistors. - almost finished schematic. - todo: - refine power options, connect USB power. - add voltage regulator. - add rescue programmation connector. - choose quartz packages.
2008-12-07 * digital/dev2/pcb:Nicolas Schodet
- updated enc28j60 peripheral components.
2008-12-06 * digital/dev2/pcb:Nicolas Schodet
- added ethernet. - added connectors analog switch. - power separation still to be refined.
2008-12-06 * digital/dev2/pcb:Nicolas Schodet
- first solution for HE10 connections, draft.