summaryrefslogtreecommitdiff
path: root/digital/beacon/src/Bitcloud_stack/Components/HAL/include
diff options
context:
space:
mode:
Diffstat (limited to 'digital/beacon/src/Bitcloud_stack/Components/HAL/include')
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/adc.h229
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/appTimer.h81
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/atomic.h72
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/bcTimer.h98
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/calibration.h31
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/dbgu.h41
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/eeprom.h113
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/halInit.h31
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/halTaskManager.h335
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/hsmci.h142
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/i2cPacket.h165
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/irq.h203
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/pwm.h193
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/reducePower.h33
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/resetReason.h153
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleep.h71
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleepTimer.h69
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/spi.h173
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/uart.h118
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/uid.h48
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/usart.h289
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/usb.h245
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/w1.h109
-rw-r--r--digital/beacon/src/Bitcloud_stack/Components/HAL/include/wdtCtrl.h122
24 files changed, 0 insertions, 3164 deletions
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/adc.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/adc.h
deleted file mode 100644
index fddde028..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/adc.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/**************************************************************************//**
- \file adc.h
-
- \brief The header file describes the ADC interface
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 22.11.07 A. Khromykh - Created.
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _ADC_H
-#define _ADC_H
-
-// \cond
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-// \endcond
-
-/** \brief adc resolution */
-#define RESOLUTION_8_BIT 0
-#define RESOLUTION_10_BIT 1
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/**************************************************************************//**
-\brief adc sample rate
-******************************************************************************/
-#if defined(AT91SAM7X256)
- typedef enum
- {
- ADC_533KSPS,
- ADC_429KSPS,
- ADC_369KSPS,
- ADC_250KSPS,
- ADC_136KSPS,
- ADC_68KSPS,
- ADC_34KSPS
- } HAL_AdcSampleRate_t;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- typedef enum
- {
- ADC_77KSPS,
- ADC_39KSPS,
- ADC_19200SPS,
- ADC_9600SPS,
- ADC_4800SPS
- } HAL_AdcSampleRate_t;
-#endif
-
-/**************************************************************************//**
-\brief adc voltage reference
-******************************************************************************/
-typedef enum
-{
- /** \brief AREF, Internal Vref turned off. \n
- If 10x or 200x gain is selected, only 2.56 V should be used as Internal Voltage Reference. \n
- For differential conversion, only 1.1V cannot be used as internal voltage reference. */
- AREF = (0 << 6),
- /** \brief AVCC with external capacitor at AREF pin */
- AVCC = (1 << 6),
- /** \brief Internal 1.1V Voltage Reference with external capacitor at AREF pin */
- INTERNAL_1d1V = (2 << 6),
- /** \brief Internal 2.56V Voltage Reference with external capacitor at AREF pin */
- INTERNAL_2d56V = (3 << 6)
-} HAL_AdcVoltageReference_t;
-
-/**************************************************************************//**
-\brief adc structure of parameters
-******************************************************************************/
-typedef struct
-{
- /** \brief conversion resolution */
- uint8_t resolution;
- /** \brief adc sample rate */
- HAL_AdcSampleRate_t sampleRate;
- /** \brief adc voltage reference selections (only for avr) */
- HAL_AdcVoltageReference_t voltageReference;
- /** \brief pointer to the application data */
- void *bufferPointer;
- /** \brief amount of samples (buffer cells) */
- uint16_t selectionsAmount;
- /** \brief pointer to callback method */
- void (*callback)();
-} HAL_AdcParams_t;
-
-/**************************************************************************//**
-\brief channel number. \n
-Note for avr:
-If 10x gain is used, 8 bit resolution can be expected. \n
-If 200x gain is used, 7 bit resolution can be expected. \n
-If the user wants to perform a quick polarity check of the result, \n
-it is sufficient to read the MSB of the result. If the bit is one, \n
-the result is negative, and if this bit is zero, the result is positive. \n
-To reach the given accuracy, 10x or 200x Gain should not be used \n
-for operating voltage below 2.7V.
-******************************************************************************/
-#if defined(AT91SAM7X256)
- typedef enum
- {
- HAL_ADC_CHANNEL0 = (1 << 0),
- HAL_ADC_CHANNEL1 = (1 << 1),
- HAL_ADC_CHANNEL2 = (1 << 2),
- HAL_ADC_CHANNEL3 = (1 << 3),
- HAL_ADC_CHANNEL4 = (1 << 4),
- HAL_ADC_CHANNEL5 = (1 << 5),
- HAL_ADC_CHANNEL6 = (1 << 6),
- HAL_ADC_CHANNEL7 = (1 << 7)
- } HAL_AdcChannelNumber_t;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- typedef enum
- {
- /** \brief channel ADC0 */
- HAL_ADC_CHANNEL0 = 0,
- /** \brief channel ADC1 */
- HAL_ADC_CHANNEL1 = 1,
- /** \brief channel ADC2 */
- HAL_ADC_CHANNEL2 = 2,
- /** \brief channel ADC3 */
- HAL_ADC_CHANNEL3 = 3,
- /** \brief ADC0 - ADC0 with gain 10x */
- HAL_ADC_DIFF_CHANNEL0 = 8,
- /** \brief ADC1 - ADC0 with gain 10x */
- HAL_ADC_DIFF_CHANNEL1 = 9,
- /** \brief ADC0 - ADC0 with gain 200x */
- HAL_ADC_DIFF_CHANNEL2 = 10,
- /** \brief ADC1 - ADC0 with gain 200x */
- HAL_ADC_DIFF_CHANNEL3 = 11,
- /** \brief ADC2 - ADC2 with gain 10x */
- HAL_ADC_DIFF_CHANNEL4 = 12,
- /** \brief ADC3 - ADC2 with gain 10x */
- HAL_ADC_DIFF_CHANNEL5 = 13,
- /** \brief ADC2 - ADC2 with gain 200x */
- HAL_ADC_DIFF_CHANNEL6 = 14,
- /** \brief ADC3 - ADC2 with gain 200x */
- HAL_ADC_DIFF_CHANNEL7 = 15
- } HAL_AdcChannelNumber_t;
-#endif
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Opens the ADC to make the measurement on the ADC channel.
-
- \param[in] param - address of HAL_AdcParams_t structure. \n
- fields of structure set by user: \n
- resolution - conversion resolution. Must be chosen from: \n
- RESOLUTION_8_BIT \n
- RESOLUTION_10_BIT \n
- sampleRate - sample rate. Must be chosen from: \n
- for avr hardware platform \n
- ADC_77KSPS \n
- ADC_39KSPS \n
- ADC_19200SPS \n
- ADC_9600SPS \n
- ADC_4800SPS \n
- for arm hardware platform \n
- ADC_533KSPS \n
- ADC_429KSPS \n
- ADC_369KSPS \n
- ADC_250KSPS \n
- ADC_136KSPS \n
- ADC_68KSPS \n
- ADC_34KSPS \n
- bufferPointer - pointer to the application data buffer. \n
- Buffer cell is one byte for 8-bit resolution. \n
- Buffer cell is two bytes for 10-bit resolution. \n
- selectionsAmount - amount of samples (buffer cells). \n
- callback - pointer to the function that will notify about measurement completion.
-\return
- -1 - unsupported parameter or ADC is busy. \n
- 0 - success.
-******************************************************************************/
-int HAL_OpenAdc(HAL_AdcParams_t *param);
-
-/**************************************************************************//**
-\brief Starts ADC with the parameters defined in HAL_OpenAdc.
-
- \param[in] channel - number of ADC channel. Must be chosen from:\n
- HAL_ADC_CHANNEL0 \n
- HAL_ADC_CHANNEL1 \n
- HAL_ADC_CHANNEL2 \n
- HAL_ADC_CHANNEL3 \n
- next four channels only for arm hardware platform \n
- HAL_ADC_CHANNEL4 \n
- HAL_ADC_CHANNEL5 \n
- HAL_ADC_CHANNEL6 \n
- HAL_ADC_CHANNEL7 \n
- next eight channels only for avr hardware platform \n
- HAL_ADC_DIFF_CHANNEL0 \n
- HAL_ADC_DIFF_CHANNEL1 \n
- HAL_ADC_DIFF_CHANNEL2 \n
- HAL_ADC_DIFF_CHANNEL3 \n
- HAL_ADC_DIFF_CHANNEL4 \n
- HAL_ADC_DIFF_CHANNEL5 \n
- HAL_ADC_DIFF_CHANNEL6 \n
- HAL_ADC_DIFF_CHANNEL7 \n
-
-\return
- -1 - unable to open ADC (unsupported channel number). \n
- 0 - success.
-******************************************************************************/
-int HAL_ReadAdc(HAL_AdcChannelNumber_t channel);
-
-/**************************************************************************//**
-\brief Closes the ADC.
-
-\return
- -1 - the module was not open. \n
- 0 - success.
-******************************************************************************/
-int HAL_CloseAdc(void);
-
-#endif /* _ADC_H */
-// eof adc.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/appTimer.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/appTimer.h
deleted file mode 100644
index 9c241ab6..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/appTimer.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/***************************************************************************//**
- \file appTimer.h
-
- \brief The header file describes the appTimer interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _APPTIMER_H
-#define _APPTIMER_H
-
-// \cond
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <bcTimer.h>
-#include <halAppClock.h>
-// \endcond
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief fields of structure: \n
- uint32_t interval - timer firing interval. Interval must be more than 10 ms (set by user) \n
- TimerMode_t mode - timer work mode (set by user). Must be chosen from: \n
- TIMER_REPEAT_MODE \n
- TIMER_ONE_SHOT_MODE \n
- void (*callback)(void) - pointer to timer callback function (set by user). */
-typedef Timer_t HAL_AppTimer_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Starts to count an interval (starts user timer).
-
-\param[in]
- appTimer - pointer to the timer structure (HAL_AppTimer_t is typedef Timer_t)
-
-\return
- -1 - pointer is NULL
- 0 - success
-******************************************************************************/
-int HAL_StartAppTimer(HAL_AppTimer_t *appTimer);
-
-/**************************************************************************//**
-\brief Stops the user timer.
-
-\param[in]
- appTimer - pointer to the timer structure.
-
-\return
- -1 - there is no appTimer started or pointer is NULL
- 0 - success
-******************************************************************************/
-int HAL_StopAppTimer(HAL_AppTimer_t *appTimer);
-
-/**************************************************************************//**
-\brief Gets system time.
-
-\return
- time since power up in milliseconds(8 bytes).
-******************************************************************************/
-BcTime_t HAL_GetSystemTime(void);
-
-#endif /*_APPTIMER_H*/
-//eof appTimer.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/atomic.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/atomic.h
deleted file mode 100644
index ada41d9c..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/atomic.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/**************************************************************************//**
- \file atomic.h
-
- \brief The header file describes the atomic sections
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 20/08/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _ATOMIC_H
-#define _ATOMIC_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#if defined(AT91SAM7X256) || defined(AT32UC3A0512) || defined(AT91SAM3S4C)
- #include <inttypes.h>
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) \
- || defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3) || defined(ATMEGA128RFA1)
- #include <halAtomic.h>
-#endif
-
-#if defined(AT91SAM7X256) || defined(AT32UC3A0512) || defined(AT91SAM3S4C)
-/******************************************************************************
- Types section
-******************************************************************************/
-typedef uint32_t atomic_t;
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-/******************************************************************************
- Disables global interrupt. Enter atomic section.
-******************************************************************************/
-void halStartAtomic(atomic_t volatile *pAtomic);
-
-/******************************************************************************
- Exit atomic section
-******************************************************************************/
-void halEndAtomic(atomic_t volatile *pAtomic);
- /** \brief Marks the begin of atomic section */
- #define ATOMIC_SECTION_ENTER {volatile atomic_t __atomic; halStartAtomic(&__atomic);
- /** \brief Marks the end of atomic section */
- #define ATOMIC_SECTION_LEAVE halEndAtomic(&__atomic);}
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) \
- || defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3) || defined(ATMEGA128RFA1)
- /** \brief Marks the begin of atomic section */
- #define ATOMIC_SECTION_ENTER {atomic_t __atomic = halStartAtomic();
- /** \brief Marks the end of atomic section */
- #define ATOMIC_SECTION_LEAVE halEndAtomic(__atomic);}
-#elif defined(SIMULATOR)
- /** \brief Marks the begin of atomic section */
- #define ATOMIC_SECTION_ENTER do {} while (0);
- /** \brief Marks the end of atomic section */
- #define ATOMIC_SECTION_LEAVE do {} while (0);
-#endif
-
-#endif // _ATOMIC_H
-
-// eof atomic.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/bcTimer.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/bcTimer.h
deleted file mode 100644
index 88ce15c8..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/bcTimer.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/**************************************************************************//**
- \file bcTimer.h
-
- \brief Declaration of timer queue interface, hardware-independent module.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 7/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _MNHALTIMER_H
-#define _MNHALTIMER_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief mode of timers */
-typedef enum
-{
- TIMER_REPEAT_MODE,
- TIMER_ONE_SHOT_MODE
-} TimerMode_t;
-
-/** \brief fields of structure: \n
- uint32_t interval - timer firing interval (set by user) \n
- TimerMode_t mode - timer work mode (set by user). Must be chosen from: \n
- TIMER_REPEAT_MODE \n
- TIMER_ONE_SHOT_MODE \n
- void (*callback)(void) - pointer to timer callback function (set by user). \n
- next - pointer to next cell of list \n
- intervalLeft - absolute fired time */
-typedef struct _Timer_t
-{
- struct
- {
- struct _Timer_t *next;
- uint32_t sysTimeLabel;
- } service;
- uint32_t interval;
- TimerMode_t mode;
- void (*callback)(void);
-} Timer_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Adds timer to the timer's list. Timers sorted by remaining time.
-\param[in]
- head - address of pointer to head of the timers list.
-\param[in]
- timer - address of timer that must be added to the list.
-\param[in]
- sysTime - current time, used for sorting.
-******************************************************************************/
-void halAddTimer(Timer_t **head, Timer_t *timer, uint32_t sysTime);
-
-/**************************************************************************//**
-\brief Removes timer from the timers list.
-\param[in]
- head - address of pointer to head of the timers list.
-\param[in]
- prev - address of the timer before the timer that must be removed from the list.
-\param[in]
- p - address of timer that must be removed from the list.
-
-\return pointer to next cell or pointer to head if deleting is head
-******************************************************************************/
-Timer_t* halRemoveTimer(Timer_t **head, Timer_t *prev, Timer_t *p);
-
-/**************************************************************************//**
-\brief The search of the timer in the timers list before one.
-\param[in]
- head - address of pointer to head of the timers list.
-
-\return pointer to saerching timer
-******************************************************************************/
-Timer_t *halFindPrevTimer(Timer_t **head, Timer_t *p);
-
-#endif /* _MNHALTIMER_H */
-
-// eof bcTimer.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/calibration.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/calibration.h
deleted file mode 100644
index 3bfca393..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/calibration.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**************************************************************************//**
- \file calibration.h
-
- \brief Interface to calibrate the internal RC generator.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _CALIBRATION_H
-#define _CALIBRATION_H
-/**************************************************************************//**
-\brief Performs calibration of the main clock generator \n
-(only for AVR and internal RC oscillator).
-******************************************************************************/
-void HAL_CalibrateMainClock(void);
-
-#endif /* _CALIBRATION_H */
-// eof calibration.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/dbgu.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/dbgu.h
deleted file mode 100644
index 44f76ca4..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/dbgu.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**************************************************************************//**
- \file dbgu.h
-
- \brief Declarations of debug message interface (feature only for atmel arm).
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 11/11/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _DBGU_H
-#define _DBGU_H
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Open dbgu port (115200 baud, 8N1 format).
-******************************************************************************/
-void HAL_OpenDbgu(void);
-
-/**************************************************************************//**
-\brief Send string trough dbgu port.
-
-\param[in]
- buffer - pointer to the string
-******************************************************************************/
-void HAL_SendDbguMessage(const char *buffer);
-
-#endif /* _DBGU_H */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/eeprom.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/eeprom.h
deleted file mode 100644
index a4a21966..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/eeprom.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/**************************************************************************//**
- \file eeprom.h
-
- \brief The header file describes the EEPROM interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _EEPROM_H
-#define _EEPROM_H
-
-// \cond
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#if defined(AT91SAM7X256)
- #define EEPROM_DATA_MEMORY_SIZE 0x400u
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) \
- || defined(ATXMEGA256A3) || defined(ATXMEGA256D3) || defined(ATMEGA128RFA1) \
- || defined(AT91SAM3S4C)
- #define EEPROM_DATA_MEMORY_SIZE 0x1000u
-#elif defined(ATXMEGA128A1)
- #define EEPROM_DATA_MEMORY_SIZE 0x800u
-#endif
-// \endcond
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/**************************************************************************//**
-\brief eeprom access control structure
-******************************************************************************/
-typedef struct
-{
- /** \brief EEPROM address */
- uint16_t address;
- /** \brief pointer to data memory */
- uint8_t *data;
- /** \brief number of bytes */
- uint16_t length;
-} HAL_EepromParams_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/******************************************************************************
-\brief Reads a number of bytes defined by HAL_EepromParams_t from the EEPROM.
-\param[in]
- param - address of HAL_EepromParams_t structure. \n
- fields of structure set by user: \n
- address - eeprom address \n
- data - pointer to data memory \n
- length - number of bytes
-\param[in]
- readDone - pointer to the function that will notify about reading completion.
-\return
- 0 - success, \n
- -1 - the number of bytes to read is too large, \n
- -2 - the previous EEPROM request is not completed yet.
-******************************************************************************/
-int HAL_ReadEeprom(HAL_EepromParams_t *params, void (*readDone)());
-
-/******************************************************************************
-\brief Writes a number of bytes defined by HAL_EepromParams_t to EEPROM.
-By writeDone parameter user can control if write operation will be asynchronous
-or synchronous.
-\param[in]
- param - address of HAL_EepromParams_t structure. \n
- fields of structure set by user: \n
- address - eeprom address \n
- data - pointer to data memory \n
- length - number of bytes
-\param[in]
- writeDone - pointer to the function that will notify about writing completion. \n
- Only for avr: \n
- if writeDone is NULL write operation will be synchronous.
-\return
- 0 - success, \n
- -1 - the number of bytes to write is too large, \n
- -2 - the previous EEPROM request is not completed yet.
-******************************************************************************/
-int HAL_WriteEeprom(HAL_EepromParams_t *params, void (*writeDone)());
-
-/**************************************************************************//**
-\brief Checks the eeprom state.
-
-\return
- true - eeprom is busy; \n
- false - eeprom is free;
-******************************************************************************/
-bool HAL_IsEepromBusy(void);
-
-#endif /*_EEPROM_H*/
-
-//eof eeprom.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/halInit.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/halInit.h
deleted file mode 100644
index 765df7d4..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/halInit.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**************************************************************************//**
- \file halInit.h
-
- \brief HAL start up module interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/06/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALINIT_H
-#define _HALINIT_H
-
-/**************************************************************************//**
-\brief Performs start up HAL initialization.
-******************************************************************************/
-void HAL_Init(void);
-
-#endif /* _HALINIT_H */
-// eof halInit.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/halTaskManager.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/halTaskManager.h
deleted file mode 100644
index 48738c9a..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/halTaskManager.h
+++ /dev/null
@@ -1,335 +0,0 @@
-/**************************************************************************//**
- \file halTaskManager.h
-
- \brief Declarations of enums and functions of HAL task manager.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _HALTASKHANDLER_H
-#define _HALTASKHANDLER_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <taskManager.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#if defined(AT91SAM7X256)
-/*! \brief task ID for hal task manager. HAL_FIRST_X are free ID. */
-enum
-{
- HAL_USB_ENDPOINTS = 1ul << 0,
- HAL_USB_SUSPEND = 1ul << 1,
- HAL_USB_RESUME = 1ul << 2,
- HAL_USB_BUS_RESET = 1ul << 3,
- HAL_TASK_USART = 1ul << 4,
- HAL_TIMER4_COMPA = 1ul << 5, /** timer interrupt is happened */
- HAL_TWI = 1ul << 6, /** twi bus interrupt is happened */
- HAL_SPI0_TXBUFE = 1ul << 7, /** spi0 dma buffer is empty */
- HAL_SPI0_RXBUFF = 1ul << 8, /** spi0 dma buffer is full */
- HAL_SPI1_TXBUFE = 1ul << 9, /** spi1 dma buffer is empty */
- HAL_SPI1_RXBUFF = 1ul << 10, /** timer interrupt is happened */
- HAL_ADC = 1ul << 11, /** adc measurement is ready */
- HAL_FIRST_12 = 1ul << 12,
- HAL_FIRST_13 = 1ul << 13,
- HAL_FIRST_14 = 1ul << 14,
- HAL_FIRST_15 = 1ul << 15,
- HAL_FIRST_16 = 1ul << 16,
- HAL_FIRST_17 = 1ul << 17,
- HAL_FIRST_18 = 1ul << 18,
- HAL_FIRST_19 = 1ul << 19,
- HAL_FIRST_20 = 1ul << 20,
- HAL_FIRST_21 = 1ul << 21,
- HAL_FIRST_22 = 1ul << 22,
- HAL_FIRST_23 = 1ul << 23,
- HAL_FIRST_24 = 1ul << 24,
- HAL_FIRST_25 = 1ul << 25,
- HAL_FIRST_26 = 1ul << 26,
- HAL_FIRST_27 = 1ul << 27,
- HAL_FIRST_28 = 1ul << 28,
- HAL_FIRST_29 = 1ul << 29,
- HAL_FIRST_30 = 1ul << 30,
- HAL_FIRST_31 = 1ul << 31
-};
-
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) \
- || defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3) || defined(ATMEGA128RFA1)
-/**************************************************************************//**
- \brief halTaskFlags0 flags definitions.
-******************************************************************************/
-enum
-{
- HAL_ASYNC_TIMER = (uint8_t)1 << 0,
- HAL_SYNC_SLEEP_TIME = (uint8_t)1 << 1,
- HAL_EMPTY_TASK_0_2 = (uint8_t)1 << 2,
- HAL_EMPTY_TASK_0_3 = (uint8_t)1 << 3,
- HAL_EMPTY_TASK_0_4 = (uint8_t)1 << 4,
- HAL_EMPTY_TASK_0_5 = (uint8_t)1 << 5,
- HAL_EMPTY_TASK_0_6 = (uint8_t)1 << 6,
- HAL_EMPTY_TASK_0_7 = (uint8_t)1 << 7
-};
-
-/**************************************************************************//**
- \brief halTaskFlags1 flags definitions.
-******************************************************************************/
-enum
-{
- HAL_EMPTY_TASK_1_0 = (uint8_t)1 << 0,
- HAL_EMPTY_TASK_1_1 = (uint8_t)1 << 1,
- HAL_EMPTY_TASK_1_2 = (uint8_t)1 << 2,
- HAL_EMPTY_TASK_1_3 = (uint8_t)1 << 3,
- HAL_EMPTY_TASK_1_4 = (uint8_t)1 << 4,
- HAL_EMPTY_TASK_1_5 = (uint8_t)1 << 5,
- HAL_EMPTY_TASK_1_6 = (uint8_t)1 << 6,
- HAL_EMPTY_TASK_1_7 = (uint8_t)1 << 7
-};
-
-/**************************************************************************//**
- \brief halTaskFlags2 flags definitions.
-******************************************************************************/
-enum
-{
- HAL_EMPTY_TASK_2_0 = (uint8_t)1 << 0,
- HAL_EMPTY_TASK_2_1 = (uint8_t)1 << 1,
- HAL_EMPTY_TASK_2_2 = (uint8_t)1 << 2,
- HAL_EMPTY_TASK_2_3 = (uint8_t)1 << 3,
- HAL_EMPTY_TASK_2_4 = (uint8_t)1 << 4,
- HAL_EMPTY_TASK_2_5 = (uint8_t)1 << 5,
- HAL_TASK_SPI = (uint8_t)1 << 6,
- HAL_TASK_USART = (uint8_t)1 << 7
-};
-
-/**************************************************************************//**
- \brief halTaskFlags3 flags definitions.
-******************************************************************************/
-enum
-{
- HAL_SM_REQ = (uint8_t)1 << 0,
- HAL_ADC = (uint8_t)1 << 1,
- HAL_EE_READY = (uint8_t)1 << 2,
- HAL_USB_ENDPOINTS = (uint8_t)1 << 3,
- HAL_USB_SUSPEND = (uint8_t)1 << 4,
- HAL_USB_RESUME = (uint8_t)1 << 5,
- HAL_USB_BUS_RESET = (uint8_t)1 << 6,
- HAL_EMPTY_TASK_3_7 = (uint8_t)1 << 7
-};
-
-/**************************************************************************//**
- \brief halTaskFlags4 flags definitions.
-******************************************************************************/
-enum
-{
- HAL_WAKEUP = (uint8_t)1 << 0,
- HAL_TWI = (uint8_t)1 << 1,
- HAL_TIMER4_COMPA = (uint8_t)1 << 2,
- HAL_SLEEP = (uint8_t)1 << 3,
- HAL_EXT_HANDLER = (uint8_t)1 << 4,
- HAL_EMPTY_TASK_4_4 = (uint8_t)1 << 5,
- HAL_EMPTY_TASK_4_6 = (uint8_t)1 << 6,
- HAL_EMPTY_TASK_4_7 = (uint8_t)1 << 7
-};
-
-#elif defined(AT32UC3A0512)
-/*! \brief task ID for hal task manager. HAL_FIRST_X are free ID. */
-enum
-{
- HAL_APPTIMER = 1ul << 0,
- HAL_TASK_USART = 1ul << 1,
- HAL_FIRST_2 = 1ul << 2,
- HAL_FIRST_3 = 1ul << 3,
- HAL_FIRST_4 = 1ul << 4,
- HAL_FIRST_5 = 1ul << 5,
- HAL_FIRST_6 = 1ul << 6,
- HAL_FIRST_7 = 1ul << 7,
- HAL_FIRST_8 = 1ul << 8,
- HAL_FIRST_9 = 1ul << 9,
- HAL_FIRST_10 = 1ul << 10,
- HAL_FIRST_11 = 1ul << 11,
- HAL_FIRST_12 = 1ul << 12,
- HAL_FIRST_13 = 1ul << 13,
- HAL_FIRST_14 = 1ul << 14,
- HAL_FIRST_15 = 1ul << 15,
- HAL_FIRST_16 = 1ul << 16,
- HAL_FIRST_17 = 1ul << 17,
- HAL_FIRST_18 = 1ul << 18,
- HAL_FIRST_19 = 1ul << 19,
- HAL_FIRST_20 = 1ul << 20,
- HAL_FIRST_21 = 1ul << 21,
- HAL_FIRST_22 = 1ul << 22,
- HAL_FIRST_23 = 1ul << 23,
- HAL_FIRST_24 = 1ul << 24,
- HAL_FIRST_25 = 1ul << 25,
- HAL_FIRST_26 = 1ul << 26,
- HAL_FIRST_27 = 1ul << 27,
- HAL_FIRST_28 = 1ul << 28,
- HAL_FIRST_29 = 1ul << 29,
- HAL_FIRST_30 = 1ul << 30,
- HAL_FIRST_31 = 1ul << 31
-};
-
-#elif defined(AT91SAM3S4C)
-/*! \brief task ID for hal task manager. HAL_FIRST_X are free ID. */
-enum
-{
- HAL_APPTIMER = 1ul << 0,
- HAL_TASK_USART = 1ul << 1,
- HAL_USB_ENDPOINTS = 1ul << 2,
- HAL_USB_SUSPEND = 1ul << 3,
- HAL_USB_RESUME = 1ul << 4,
- HAL_USB_BUS_RESET = 1ul << 5,
- HAL_TASK_UART = 1ul << 6,
- HAL_EE_READY = 1ul << 7,
- HAL_HSMCI = 1ul << 8,
- HAL_ASYNC_TIMER = 1ul << 9,
- HAL_WAKEUP = 1ul << 10,
- HAL_SLEEP = 1ul << 11,
- HAL_FIRST_12 = 1ul << 12,
- HAL_FIRST_13 = 1ul << 13,
- HAL_FIRST_14 = 1ul << 14,
- HAL_FIRST_15 = 1ul << 15,
- HAL_FIRST_16 = 1ul << 16,
- HAL_FIRST_17 = 1ul << 17,
- HAL_FIRST_18 = 1ul << 18,
- HAL_FIRST_19 = 1ul << 19,
- HAL_FIRST_20 = 1ul << 20,
- HAL_FIRST_21 = 1ul << 21,
- HAL_FIRST_22 = 1ul << 22,
- HAL_FIRST_23 = 1ul << 23,
- HAL_FIRST_24 = 1ul << 24,
- HAL_FIRST_25 = 1ul << 25,
- HAL_FIRST_26 = 1ul << 26,
- HAL_FIRST_27 = 1ul << 27,
- HAL_FIRST_28 = 1ul << 28,
- HAL_FIRST_29 = 1ul << 29,
- HAL_FIRST_30 = 1ul << 30,
- HAL_FIRST_31 = 1ul << 31
-};
-#endif
-
-/******************************************************************************
- External variables section
-******************************************************************************/
-#if defined(AT91SAM7X256)
-extern volatile uint32_t halTaskFlags;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) \
- || defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3) || defined(ATMEGA128RFA1)
-extern volatile uint8_t halTaskFlags0;
-extern volatile uint8_t halTaskFlags1;
-extern volatile uint8_t halTaskFlags2;
-extern volatile uint8_t halTaskFlags3;
-extern volatile uint8_t halTaskFlags4;
-#elif defined(AT32UC3A0512) || defined(AT91SAM3S4C)
-extern volatile uint32_t halTaskFlags;
-#endif
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-#if defined(AT91SAM7X256)
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask
-******************************************************************************/
-INLINE void halPostTask(uint32_t flag)
-{
- halTaskFlags |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) \
- || defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3) || defined(ATMEGA128RFA1)
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask 0
-******************************************************************************/
-INLINE void halPostTask0(uint8_t flag)
-{
- halTaskFlags0 |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask 1
-******************************************************************************/
-INLINE void halPostTask1(uint8_t flag)
-{
- halTaskFlags1 |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask 2
-******************************************************************************/
-INLINE void halPostTask2(uint8_t flag)
-{
- halTaskFlags2 |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask 3
-******************************************************************************/
-INLINE void halPostTask3(uint8_t flag)
-{
- halTaskFlags3 |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask 4
-******************************************************************************/
-INLINE void halPostTask4(uint8_t flag)
-{
- halTaskFlags4 |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-
-#elif defined(AT32UC3A0512) || defined(AT91SAM3S4C)
-/**************************************************************************//**
-\brief Set task for task manager.
-
-\param[in]
- flag task for task mask
-******************************************************************************/
-INLINE void halPostTask(uint32_t flag)
-{
- halTaskFlags |= flag;
- SYS_PostTask(HAL_TASK_ID);
-}
-#endif
-
-#endif /*_HALTASKHANDLER_H*/
-
-// eof halTaskManager.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/hsmci.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/hsmci.h
deleted file mode 100644
index 6e9dd2ea..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/hsmci.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/****************************************************************************//**
- \file hsmci.h
-
- \brief The header file describes the HSMCI interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 24/08/11 N. Fomin - Created
- ******************************************************************************/
-#ifndef _HSMCI_H
-#define _HSMCI_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halHsmci.h>
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief Hsmci descriptor */
-typedef struct
-{
- /** \brief HSMCI bus clock rate. */
- HsmciClockRate_t clockRate;
- /** \brief HSMCI bus width. */
- HsmciBusWidth_t busWidth;
- /** \brief HSMCI high speed mode. */
- bool highSpeedMode;
- /** \brief HSMCI command desciptor.
- Take a look into halHsmci.h platform specific file fore more details. */
- HAL_HsmciCommandDescriptor_t *commandDescriptor;
- /** \brief HSMCI data transfer descriptor.
- Take a look into halHsmci.h platform specific file fore more details. */
- HAL_HsmciDataTransferDescriptor_t *dataTransferDescriptor;
- /** \brief Address of the function to notify the upper layer when
- a transfer was completed. */
- void (*callback)(void);
-} HAL_HsmciDescriptor_t;
-
-/**************************************************************************//**
-\brief Open the HSMCI interface and configure pins.
-\param[in]
- descriptor - pointer to the hsmci descriptor.
-\return
- -1 - there are no free resources;
- 0 - HSMCI is ready.
-******************************************************************************/
-int HAL_OpenHsmci(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Close the HSMCI interface.
-\param[in]
- descriptor - pointer to the hsmci descriptor.
-\return
- Returns 0 on success or -1 if interface was not opened.
-******************************************************************************/
-int HAL_CloseHsmci(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Sends HSMCI command.
- Callback function will be used to notify about the finishing transmitting.
-\param[in]
- descriptor - pointer to hsmci descriptor.
-\return
- -1 - hsmci interface was not opened, there is unsent data,
- or command response buffer is zero;
- 0 - on succes.
-******************************************************************************/
-int HAL_WriteHsmciCommand(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Writes data to the HSMCI.
- Callback function will be used to notify about the finishing transmitting.
-\param[in]
- descriptor - pointer to hsmci descriptor.
-\return
- -1 - hsmci interface was not opened, there is unsent data, pointer to the data,
- the length are zero or command response buffer is zero;
- 0 - on success.
-******************************************************************************/
-int HAL_WriteHsmci(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Reads data from the HSMCI.
- Callback function will be used to notify about the finishing transmitting.
-\param[in]
- descriptor - pointer to hsmci descriptor.
-\return
- -1 - hsmci module was not opened, there is unsent data, pointer to the data,
- the interface are zero or command response buffer is zero;
- 0 - on success.
-******************************************************************************/
-int HAL_ReadHsmci(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Sets HSMCI bus speed.
-\param[in]
- descriptor - pointer to hsmci descriptor.
-\return
- -1 - hsmci interface was not opened or there is unsent data;
- 0 - on success.
-******************************************************************************/
-int HAL_SetHsmciSpeed(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Sets HSMCI bus width.
-\param[in]
- descriptor - pointer to hsmci descriptor.
-\return
- -1 - hsmci interface was not opened or there is unsent data;
- 0 - on success.
-******************************************************************************/
-int HAL_SetHsmciBusWidth(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Sets HSMCI high speed mode.
-\param[in]
- descriptor - pointer to hsmci descriptor.
-\return
- -1 - hsmci interface was not opened or there is unsent data;
- 0 - on success.
-******************************************************************************/
-int HAL_SetHsmciHighSpeedMode(HAL_HsmciDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Checks if HSMCI interface is free and ready.
-\return
- false - hsmci interface was not opened or there is unsent data;
- true - hsmci interface is ready.
-******************************************************************************/
-bool HAL_HsmciCheckReady(void);
-
-#endif /* _HSMCI_H */
-// eof hsmci.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/i2cPacket.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/i2cPacket.h
deleted file mode 100644
index 102f2cd6..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/i2cPacket.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/**************************************************************************//**
- \file i2cPacket.h
-
- \brief The header file describes the i2cPacket interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _I2CPACKET_H
-#define _I2CPACKET_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-// \cond
-#include <halClkCtrl.h>
-#include <types.h>
-// \endcond
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/** \brief i2c bus prescaler */
-#define HAL_I2C_PRESCALER 0ul
-// \cond
-/** \brief internal address size */
-#if defined(AT91SAM7X256)
- /* AT91C_TWI_IADRSZ_NO */
- #define HAL_NO_INTERNAL_ADDRESS (0x0 << 8)
- /* AT91C_TWI_IADRSZ_1_BYTE */
- #define HAL_ONE_BYTE_SIZE (0x1 << 8)
- /* AT91C_TWI_IADRSZ_2_BYTE */
- #define HAL_TWO_BYTE_SIZE (0x2 << 8)
- /* AT91C_TWI_IADRSZ_3_BYTE */
- #define HAL_THREE_BYTE_SIZE (0x3 << 8)
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- #define HAL_NO_INTERNAL_ADDRESS 0x0
- #define HAL_ONE_BYTE_SIZE 0x1
- #define HAL_TWO_BYTE_SIZE 0x2
- #define HAL_THREE_BYTE_SIZE 0x3
-#endif
-// \endcond
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief i2c baud rate */
-#if defined(AT91SAM7X256)
- typedef enum
- {
- I2C_CLOCK_RATE_250 = F_CPU/(2*250000) - 3, // 200 Kb/s clock rate
- I2C_CLOCK_RATE_125 = F_CPU/(2*125000) - 3, // 125 Kb/s clock rate
- I2C_CLOCK_RATE_100 = F_CPU/(2*100000) - 3, // 100 Kb/s clock rate
- I2C_CLOCK_RATE_62 = F_CPU/(2*62500) - 3 // 62.5 Kb/s clock rate
- } I2cClockRate_t;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- typedef enum
- {
- I2C_CLOCK_RATE_250 = ((F_CPU/250000ul) - 16ul)/(2ul * (1ul << HAL_I2C_PRESCALER) * (1ul << HAL_I2C_PRESCALER)), // 250 Kb/s clock rate
- I2C_CLOCK_RATE_125 = ((F_CPU/125000ul) - 16ul)/(2ul * (1ul << HAL_I2C_PRESCALER) * (1ul << HAL_I2C_PRESCALER)), // 125 Kb/s clock rate
- I2C_CLOCK_RATE_62 = ((F_CPU/62500ul) - 16ul)/(2ul * (1ul << HAL_I2C_PRESCALER) * (1ul << HAL_I2C_PRESCALER)) // 62.5 Kb/s clock rate
- } I2cClockRate_t;
-#endif
-
-/** \brief TWI clock rate */
-typedef struct
-{
- I2cClockRate_t clockrate; // clock rate
-} HAL_i2cMode_t;
-
-/**************************************************************************//**
-\brief i2c access control structure
-******************************************************************************/
-typedef struct
-{
- /** \brief slave address */
- uint8_t id;
- /** \brief number of bytes to be written to the bus */
- uint16_t length;
- /** \brief pointer to the data */
- uint8_t *data;
- /** \brief internal device address size conditions:
- HAL_NO_INTERNAL_ADDRESS - byte command condition \n
- HAL_ONE_BYTE_SIZE \n
- HAL_TWO_BYTE_SIZE \n
- HAL_THREE_BYTE_SIZE */
-#if defined(AT91SAM7X256)
- uint32_t lengthAddr;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- uint8_t lengthAddr;
-#endif
- /** \brief internal device address */
- uint32_t internalAddr;
- /** \brief callback function */
- void (*f)(bool result);
-} HAL_I2cParams_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Opens twi resource.\n
-field of i2cMode structure \n
-i2cClockRate_t clockrate (set by user). Must be chosen from:\n
- I2C_CLOCK_RATE_250 - 250 Kb/s clock rate \n
- I2C_CLOCK_RATE_125 - 125 Kb/s clock rate \n
- I2C_CLOCK_RATE_62 - 62.5 Kb/s clock rate \n
-
-\param[in]
- i2cMode - pointer to the mode structure.
-
-\return
- -1 - resource was already open or pointer is NULL. \n
- 0 - success.
-******************************************************************************/
-int HAL_OpenI2cPacket(HAL_i2cMode_t *i2cMode);
-
-/**************************************************************************//**
-\brief Closes resource.
-
-\return
- -1 - resource was not open. \n
- 0 - success.
-******************************************************************************/
-int HAL_CloseI2cPacket(void);
-
-/**************************************************************************//**
-\brief Writes a series of bytes out to the TWI bus. Operation result will be
-sent to the callback function of the HAL_I2cParams_t structure.
-
-\param[in]
- param - pointer to HAL_I2cParams_t structure
-\return
- 0 - the bus is free and the request is accepted. \n
- -1 - otherwise.
-******************************************************************************/
-int HAL_WriteI2cPacket(HAL_I2cParams_t *param);
-
-/**************************************************************************//**
-\brief Reads the series of bytes from the TWI bus. Operation result will be
-sent to the callback function of the HAL_I2cParams_t structure.
-
-\param[in]
- param - pointer to HAL_I2cParams_t structure
-\return
- 0 - the bus is free and the request is accepted. \n
- -1 - otherwise.
-******************************************************************************/
-int HAL_ReadI2cPacket(HAL_I2cParams_t *param);
-
-#endif /* _I2CPACKET_H */
-// eof i2cPacket.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/irq.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/irq.h
deleted file mode 100644
index bc2a36df..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/irq.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/**************************************************************************//**
- \file irq.h
-
- \brief The header file describes the IRQ interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _IRQ_H
-#define _IRQ_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-/** \brief The low level generates an interrupt request. */
-#define IRQ_LOW_LEVEL 0
-/** \brief The high level generates an interrupt request (valid only for arm and avr32). */
-#define IRQ_HIGH_LEVEL 1
-/** \brief Any edge generates an interrupt request (valid only for avr and xmega). */
-#define IRQ_ANY_EDGE 2
-/** \brief Falling edge generates an interrupt request. */
-#define IRQ_FALLING_EDGE 3
-/** \brief Rising edge generates an interrupt request. */
-#define IRQ_RISING_EDGE 4
-/** \brief interrupt is disabled. (valid only for xmega)*/
-#define IRQ_IS_DISABLED 5
-/** \brief interrupt is not changed previous state. (valid only for xmega)*/
-#define IRQ_IS_NOT_CHANGED 6
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief numbers of possible interrupt. */
-typedef enum
-{
-#if defined(AT91SAM7X256) || defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || \
- defined(AT90USB1287) || defined(ATMEGA128RFA1) || defined(AT32UC3A0512)
-/** \brief number of valid interrupt for arm and avr32. */
- IRQ_0 = 0,
-/** \brief number of valid interrupt for arm and avr32. */
- IRQ_1 = 1,
-/** \brief number of valid interrupt for avr32. */
- IRQ_2 = 2,
-/** \brief number of valid interrupt for avr32. */
- IRQ_3 = 3,
-/** \brief number of valid interrupt for avr32. */
- IRQ_4 = 4,
-/** \brief number of valid interrupt for avr(only rcb platform) and avr32. */
- IRQ_5 = 5,
-/** \brief number of valid interrupt for avr and avr32. */
- IRQ_6 = 6,
-/** \brief number of valid interrupt for avr and avr32. */
- IRQ_7 = 7,
-#endif
-#if defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3)
- IRQ_A0,
- IRQ_A1,
- IRQ_B0,
- IRQ_B1,
- IRQ_C0,
- IRQ_C1,
- IRQ_D0,
- IRQ_D1,
- IRQ_E0,
- IRQ_E1,
- IRQ_F0,
- IRQ_F1,
-#if defined(ATXMEGA128A1)
- IRQ_H0,
- IRQ_H1,
- IRQ_J0,
- IRQ_J1,
- IRQ_K0,
- IRQ_K1,
-#endif
-#endif
-#if defined(AT91SAM3S4C)
- IRQ_PORT_A,
- IRQ_PORT_B,
- IRQ_PORT_C,
-#endif
- IRQ_LIMIT
-} HAL_IrqNumber_t;
-
-#if defined(AT91SAM7X256) || defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || \
- defined(AT90USB1287) || defined(ATMEGA128RFA1) || defined(AT32UC3A0512)
-/** \brief interrupt activation condition. */
-typedef uint8_t HAL_IrqMode_t;
-#endif
-#if defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3)
-/** \brief interrupt activation condition. */
-typedef struct
-{
- uint32_t pin0 : 3;
- uint32_t pin1 : 3;
- uint32_t pin2 : 3;
- uint32_t pin3 : 3;
- uint32_t pin4 : 3;
- uint32_t pin5 : 3;
- uint32_t pin6 : 3;
- uint32_t pin7 : 3;
-} HAL_IrqMode_t;
-#endif
-#if defined(AT91SAM3S4C)
-typedef uint8_t HAL_IrqMode_t[32];
-#endif
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Registers the user's irqNumber external interrupt
-
-\param[in]
- irqNumber - IRQ number. Must be chosen from: \n
- IRQ_0 (for arm and avr32) \n
- IRQ_1 (for arm and avr32) \n
- IRQ_2 (for avr32) \n
- IRQ_3 (for avr32) \n
- IRQ_4 (for avr32) \n
- IRQ_5 (for avr (only rcb platform) and avr32) \n
- IRQ_6 (for avr and avr32) \n
- IRQ_7 (for avr and avr32) \n
- IRQ_PC (for xmega. P - port name, C - interrupt number. For example: IRQ_D1) \n
- IRQ_PORT_x (for cortex m3, x stands for port name) \n
-\param[in]
- irqMode - Controls the sort of interrupt. For avr and arm must be chosen from: \n
- IRQ_LOW_LEVEL // The low level generates an interrupt request. \n
- IRQ_HIGH_LEVEL // The high level generates an interrupt request (valid for arm, avr32, cortex m3). \n
- IRQ_ANY_EDGE // Any edge generates an interrupt request (valid for avr and cortex m3). \n
- IRQ_FALLING_EDGE // Falling edge generates an interrupt request. \n
- IRQ_RISING_EDGE // Rising edge generates an interrupt request. \n
-
- irqMode is bit field for xmega . Bit field includes members pinX (X - pin number of selected port). \n
- All members that bit field must have value:
-
- IRQ_LOW_LEVEL // The low level generates an interrupt request. \n
- IRQ_ANY_EDGE // Any edge generates an interrupt request. \n
- IRQ_FALLING_EDGE // Falling edge generates an interrupt request. \n
- IRQ_RISING_EDGE // Rising edge generates an interrupt request. \n
- IRQ_IS_DISABLED // Pin is disabled for interrupt request. \n
- IRQ_IS_NOT_CHANGED // Pin is not changed previous state.
-
-\param[in]
- f - user's interrupt handler. Handler must be executed less than 100 us.
-\return
- -1 - if irqNumber is out of range, \n
- not valid irq mode, \n
- such interrupt has been already registered. \n
- 0 - otherwise.
-******************************************************************************/
-int HAL_RegisterIrq(HAL_IrqNumber_t irqNumber, HAL_IrqMode_t irqMode, void (*f)(void));
-
-/**************************************************************************//**
-\brief Enables the irqNumber interrupt.
-\param[in]
- irqNumber - IRQ number
-\return
- -1 - if irqNumber is out of range or has not been registered yet. \n
- 0 - otherwise.
-******************************************************************************/
-int HAL_EnableIrq(HAL_IrqNumber_t irqNumber);
-
-/**************************************************************************//**
-\brief Disables the irqNumber interrupt.
-\param[in]
- irqNumber - IRQ number
-\return
- -1 - if irqNumber is out of range or has not been registered yet. \n
- 0 - otherwise.
-******************************************************************************/
-int HAL_DisableIrq(HAL_IrqNumber_t irqNumber);
-
-/**************************************************************************//**
-\brief Unregisters the user's irqNumber interrupt
-\param[in]
- irqNumber - IRQ number
-\return
- -1 - if irqNumber is out of range or has not been registered yet. \n
- 0 - otherwise.
-******************************************************************************/
-int HAL_UnregisterIrq(HAL_IrqNumber_t irqNumber);
-
-#endif /* _IRQ_H */
-//eof irq.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/pwm.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/pwm.h
deleted file mode 100644
index d2b18cff..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/pwm.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/**************************************************************************//**
- \file pwm.h
-
- \brief Description of the PWM interface
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/11/08 A. Taradov - Created
- 5/04/11 A.Razinkov - Refactored
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _PWM_H
-#define _PWM_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-#include <atomic.h>
-#include <mnUtils.h>
-
-/******************************************************************************
- Defines section
-******************************************************************************/
-#define TCCRnA(pwmUnit) MMIO_BYTE(pwmUnit)
-#define TCCRnB(pwmUnit) MMIO_BYTE(pwmUnit + 1U)
-#define TCCRnC(pwmUnit) MMIO_BYTE(pwmUnit + 2U)
-#define TCNTn(pwmUnit) MMIO_WORD(pwmUnit + 4U)
-#define ICRn(pwmUnit) MMIO_WORD(pwmUnit + 6U)
-#define OCRnA(pwmUnit) MMIO_WORD(pwmUnit + 8U)
-#define OCRnB(pwmUnit) MMIO_WORD(pwmUnit + 10U)
-#define OCRnC(pwmUnit) MMIO_WORD(pwmUnit + 12U)
-
-#define PWM_SUCCESS_STATUS 0
-#define PWM_INVALID_UNIT_STATUS -1
-#define PWM_INVALID_CHANNEL_STATUS -2
-#define PWM_INVALID_PRESCALER_STATUS -3
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/**************************************************************************//**
-\brief PWM prescaler
-******************************************************************************/
-typedef enum
-{
- PWM_STOPPED,
- PWM_PRESCALER_1,
- PWM_PRESCALER_8,
- PWM_PRESCALER_64,
- PWM_PRESCALER_256,
- PWM_PRESCALER_1024,
- PWM_PRESCALER_EXT_CLOCK_ON_FALLING_EDGE,
- PWM_PRESCALER_EXT_CLOCK_ON_RISING_EDGE,
- PWM_PRESCALER_INVALID
-} HAL_PwmPrescaler_t;
-
-/**************************************************************************//**
-\brief PWM channel
-******************************************************************************/
-typedef enum
-{
- PWM_CHANNEL_0,
- PWM_CHANNEL_1,
-#ifndef ATMEGA1284
- PWM_CHANNEL_2,
-#endif /* ATMEGA1284 */
- PWM_INVALID_CHANNEL
-} HAL_PwmChannel_t;
-
-/**************************************************************************//**
-\brief PWM impulse polarity
-******************************************************************************/
-typedef enum
-{
- /** \brief PWM output is low when duty cycle = 0% */
- PWM_POLARITY_NON_INVERTED,
- /** \brief PWM output is high when duty cycle = 0% */
- PWM_POLARITY_INVERTED
-} HAL_PwmPolarity_t;
-
-/**************************************************************************//**
-\brief PWM unit number. Relative to corresponding Timer/Counter.
-******************************************************************************/
-typedef enum
-{
- /* Base address of T/C1 PWM related registers */
- PWM_UNIT_1 = 0x80,
- /* Base address of T/C3 PWM related registers */
- PWM_UNIT_3 = 0x90
-} HAL_PwmUnit_t;
-
-/**************************************************************************//**
-\brief PWM module descriptor
-******************************************************************************/
-typedef struct _HAL_PwmDescriptor_t
-{
- /* Service fields for internal use. */
- struct
- {
- /* Pointer to Data Direction Register. PWM port dependent. */
- volatile uint8_t *DDRn;
- /* PWN channel pin number. PWM port dependent. */
- uint8_t pwmBaseChannelPin;
- /* Compare Output Mode low bit position. PWM channel dependent. */
- uint8_t COMnx0;
- /* Output Compare Register. PWM channel dependent. */
- volatile uint16_t *OCRnx;
- } service;
- /* PWM unit number. Equal to ID of Timer/Counter witch serves PWM module. */
- HAL_PwmUnit_t unit;
- /* PWM channel */
- HAL_PwmChannel_t channel;
- /* PWM polarity */
- HAL_PwmPolarity_t polarity;
-} HAL_PwmDescriptor_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Initializes the PWM.
-
-\param [in] pwmUnit - PWM unit number.
- Equal to ID of Timer/Counter witch serves PWM module.
-
-\return operation status
-******************************************************************************/
-int HAL_OpenPwm(HAL_PwmUnit_t pwmUnit);
-
-/**************************************************************************//**
-\brief Starts PWM on specified channel.
-
-\param [in] descriptor - PWM channel descriptor.
-
-\return operation status
-******************************************************************************/
-int HAL_StartPwm(HAL_PwmDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Stops PWM on specified channel.
-
-\param [in] descriptor - PWM channel descriptor.
-
-\return operation status
-******************************************************************************/
-int HAL_StopPwm(HAL_PwmDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Sets base frequency of module. Common for all module channels.
-
-\param [in] pwmUnit - PWM unit number. Equal to corresponding Timer/Counter ID.
-\param [in] top - value for the TOP register.
-\param [in] prescaler - clock prescaler.
-
-\return operation status
-******************************************************************************/
-int HAL_SetPwmFrequency(HAL_PwmUnit_t pwmUnit, uint16_t top, HAL_PwmPrescaler_t prescaler);
-
-
-/**************************************************************************//**
-\brief Sets compare value for the PWM channel.
-
-\param [in] descriptor - PWM channel descriptor.
-
-\return operation status
-******************************************************************************/
-int HAL_SetPwmCompareValue(HAL_PwmDescriptor_t *descriptor, uint16_t cmpValue);
-
-/**************************************************************************//**
-\brief Closes the PWM.
-
-\param [in] pwmUnit - PWM unit number.
- Equal to ID of Timer/Counter witch serves PWM module.
-
-\return operation status
-******************************************************************************/
-int HAL_ClosePwm(HAL_PwmUnit_t pwmUnit);
-
-#endif /* _PWM_H */
-
-// eof pwm.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/reducePower.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/reducePower.h
deleted file mode 100644
index b531f963..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/reducePower.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/**************************************************************************//**
- \file reducePower.h
-
- \brief The header file describes the power reducing interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 6/10/09 A. Khromykh - Created.
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-#ifndef _REDUCEPOWER_H
-#define _REDUCEPOWER_H
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/******************************************************************************
-\brief Stops the clock to all peripherals, which are not used by BitCloud. \n
-(implemented only for atxmega128a1 & atxmega256a3).
-******************************************************************************/
-void HAL_SwitchOffPeripherals(void);
-
-#endif /* _REDUCEPOWER_H */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/resetReason.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/resetReason.h
deleted file mode 100644
index 25311296..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/resetReason.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/**************************************************************************//**
- \file resetReason.h
-
- \brief The header file describes the the reset reason interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 5/12/07 A. Khromykh - Created.
- 2/09/09 M. Gekk - Platform XMega is supported.
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _RESETREASON_H
-#define _RESETREASON_H
-
-/* \cond */
-/******************************************************************************
- Define(s) section
- ******************************************************************************/
-#define TEMP_WARM_RESET 0x12
-/* \endcond */
-
-/******************************************************************************
- Types section
- ******************************************************************************/
-/** \brief The reset reason types. */
-#if defined(AT91SAM7X256)
- typedef enum
- {
- /** \brief VDDCORE rising */
- POWER_ON_RESET = 0x00,
- /** \brief Watchdog fault occurred */
- WDT_RESET = 0x02,
- /** \brief Processor reset required by the software */
- WARM_RESET = 0x03,
- /** \brief NRST pin detected low */
- EXTERNAL_RESET = 0x04,
- /** \brief BrownOut reset occurred */
- BROWN_OUT_RESET = 0x05
- } HAL_ResetReason_t;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- typedef enum
- {
- /** \brief jump to the NULL pointer was issued. */
- NULL_PTR_DEREF_RESET = 0x0,
- /** \brief the supply voltage was below reset threshold. */
- POWER_ON_RESET = 0x1,
- /** \brief a low level was present on RESET pin. */
- EXTERNAL_RESET = 0x2,
- /** \brief the supply voltage was below Brown-out reset threshold. Set by fuses.*/
- BROWN_OUT_RESET = 0x4,
- /** \brief Watch Dog Timer period expired. */
- WDT_RESET = 0x8,
- /** \brief MCU was reset by JTAG. */
- JTAG_RESET = 0x10,
- /** \brief software reset. */
- WARM_RESET = 0x11
- } HAL_ResetReason_t;
-#elif defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3)
- typedef enum
- {
- /** \brief jump to the NULL pointer was issued. */
- NULL_PTR_DEREF_RESET = 0x00,
- /** \brief Power-on reset is released when the VCC stops rising or when
- * the VCC level has reached the Power-on Threshold Voltage (VPOT) level. */
- POWER_ON_RESET = (1U << 0),
- /** \brief The external reset will trigger when the RESET pin is driven
- * below the RESET pin threshold voltage, VRST. */
- EXTERNAL_RESET = (1U << 1),
- /** \brief The VCC level falls bellow the trigger level for a minimum time. */
- BROWN_OUT_RESET = (1U << 2),
- /** \brief Watchdog reset will be given if the WDT is not reset from t
- * he software within a programmable timout period, */
- WATCHDOG_RESET = (1U << 3),
- /** \brief The Program and Debug Interface reset contains a separate reset source
- * that is used to reset the device during external programming and debugging. */
- DEBUG_RESET = (1U << 4),
- /** \brief The Software reset makes it possible to issue a system reset from
- * software by writing to the Software Reset bit in the Reset Control Register. */
- WARM_RESET = (1U << 5)
- } HAL_ResetReason_t;
-#elif defined(AT32UC3A0512)
- typedef enum
- {
- /** \brief The CPU was reset due to the supply voltage
- * being lower than the power-on threshold level. */
- POWER_ON_RESET = (1U << 0),
- /** \brief The CPU was reset due to the supply voltage
- * being lower than the brown-out threshold level. */
- BROWN_OUT_RESET = (1U << 1),
- /** \brief The CPU was reset due to the RESET pin being asserted. */
- EXTERNAL_RESET = (1U << 2),
- /** \brief CPU reset caused by watchdog. */
- WDT_RESET = (1U << 3),
- /** \brief The CPU was reset by setting the bit RC_CPU in the JTAG reset register. */
- DEBUG_RESET = (1U << 4),
- /** \brief The CPU was reset because it had detected an illegal access. */
- CPUERR_RESET = (1U << 7),
- /** \brief The CPU was reset because the RES strobe in
- * the OCD Development Control register has been written to one. */
- OCDRST_RESET = (1U << 8),
- /** \brief The chip was reset by setting the bit RC_OCD in the
- * JTAG reset register or by using the JTAG HALT instruction.*/
- JTAGHARD_RESET = (1U << 9),
- /** \brief CPU reset caused by call to halSoftwareReset. */
- WARM_RESET = (1U << 10),
- } HAL_ResetReason_t;
-#elif defined(AT91SAM3S4C)
- typedef enum
- {
- /** \brief A general reset occurs when a Power-on-reset is detected,
- a Brownout or a Voltage regulation loss is detected by the Supply controller. */
- GENERAL_RESET = 0x00,
- /** \brief A Backup reset occurs when the chip returns from Backup mode.
- The core_backup_reset signal is asserted by the Supply Controller when a Backup reset occurs. */
- BACKUP_RESET = 0x01,
- /** \brief CPU reset caused by watchdog. */
- WDT_RESET = 0x02,
- /** \brief CPU reset caused by call to halSoftwareReset. */
- WARM_RESET = 0x03,
- /** \brief The CPU was reset due to the RESET pin being asserted. */
- EXTERNAL_RESET = 0x04
- } HAL_ResetReason_t;
-#else
- #error 'unsupported cpu'
-#endif
-
-/******************************************************************************
- Prototypes section
- ******************************************************************************/
-/******************************************************************************
- \brief Returns the reset reason.
- \return The reason of reset.
- ******************************************************************************/
-HAL_ResetReason_t HAL_ReadResetReason(void);
-
-/**************************************************************************//**
- \brief Software reset.
- ******************************************************************************/
-void HAL_WarmReset(void);
-
-#endif /* _RESETREASON_H */
-/* resetReason.h */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleep.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleep.h
deleted file mode 100644
index dc5c55b1..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleep.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/**************************************************************************//**
- \file sleep.h
-
- \brief The header file describes the sleep interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 1/12/09 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-#ifndef _SLEEP_H
-#define _SLEEP_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <types.h>
-
-/******************************************************************************
- Types section
-******************************************************************************/
-typedef void (* HAL_WakeUpCallback_t)(void);
-
-/** \brief fields of structure \n
- \brief uint32_t sleepTime - time of mcu+radio sleeping \n
- \brief HAL_WakeUpCallback_t callback - pointer to wake up callback function */
-typedef struct
-{
- uint32_t sleepTime;
- HAL_WakeUpCallback_t callback;
-} HAL_Sleep_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Starts sleep timer and HAL sleep. When system is wake up send callback
-\param[in]
- sleepParam - pointer to sleep structure.
-\return
- -1 - bad parameters, \n
- -2 - sleep timer busy, \n
- -3 - sleep system has been started.
- 0 - success.
-******************************************************************************/
-int HAL_StartSystemSleep(HAL_Sleep_t *sleepParam);
-
-/**************************************************************************//**
-\brief Prepares mcu for power-save, power-down.
- Power-down the mode is possible only when internal RC is used
-\return
- -1 - there is no possibility to sleep.
-******************************************************************************/
-int HAL_Sleep(void);
-
-/***************************************************************************//**
-\brief Makes MCU enter Idle mode.
-*******************************************************************************/
-void HAL_IdleMode(void);
-
-#endif /* _SLEEP_H */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleepTimer.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleepTimer.h
deleted file mode 100644
index 87c29632..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/sleepTimer.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/**************************************************************************//**
- \file sleepTimer.h
-
- \brief The header file describes the sleepTimer interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/07 E. Ivanov - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _SLEEPTIMER_H
-#define _SLEEPTIMER_H
-
-// \cond
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <bcTimer.h>
-// \endcond
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief fields of structure \n
- \brief uint32_t interval - timer firing interval (set by user) \n
- \brief TimerMode_t mode - timer work mode (set by user). Must be chosen from: \n
- TIMER_REPEAT_MODE \n
- TIMER_ONE_SHOT_MODE \n
- \brief void (*callback)() - pointer to the timer callback function (set by user) \n */
-typedef Timer_t HAL_SleepTimer_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Starts sleep timer. Interval must be greater one time of sleep timer tick.
-\param[in]
- sleepTimer - pointer to sleep timer structure.
-\return
- -1 - NULL pointer, \n
- -2 - interval can not be counted out, \n
- -3 - sleep timer has already started, \n
- 0 - otherwise.
-******************************************************************************/
-int HAL_StartSleepTimer(HAL_SleepTimer_t *sleepTimer);
-
-/**************************************************************************//**
-\brief Removes timer.
-\param[in]
- sleepTimer - address of the timer to be removed from the list
-\return
- -1 - there is no active sleep timer, \n
- 0 - otherwise.
-******************************************************************************/
-int HAL_StopSleepTimer(HAL_SleepTimer_t *sleepTimer);
-
-#endif /* _SLEEPTIMER_H */
-// eof sleepTimer.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/spi.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/spi.h
deleted file mode 100644
index c34f5dcd..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/spi.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/****************************************************************************//**
- \file spi.h
-
- \brief The header file describes the USART SPI mode (for avr) and SPI1 bus (for arm).
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 29/05/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _SPI_H
-#define _SPI_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#if defined(AT91SAM7X256)
- #include <halMemSpi.h>
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || \
- defined(AT90USB1287) || defined(ATMEGA128RFA1) || defined(ATXMEGA128A1) || \
- defined(ATXMEGA256A3) || defined(ATXMEGA256D3)
- #include <halSpi.h>
-#endif
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief Spi descriptor */
-typedef struct
-{
- /** \brief tty - SPI_CHANNEL_n to be used. "n" range depends on the platform.
- Take a look into halSpi.h platform specific file fore more details. */
- SpiChannel_t tty;
- /** \brief SpiClockMode_t clockMode - spi clock mode (set by user). Must be chosen from: \n
- SPI_CLOCK_MODE0 \n
- SPI_CLOCK_MODE1 \n
- SPI_CLOCK_MODE2 \n
- SPI_CLOCK_MODE3 \n */
- SpiClockMode_t clockMode;
-#if defined(AT91SAM7X256)
- /** \brief parameters are valid only for arm: */
- /** \brief symbol size (bits) (set by user). Must be set: \n
- SPI_8BITS_SYMBOL \n
- SPI_9BITS_SYMBOL \n
- SPI_10BITS_SYMBOL \n
- SPI_11BITS_SYMBOL \n
- SPI_12BITS_SYMBOL \n
- SPI_13BITS_SYMBOL \n
- SPI_14BITS_SYMBOL \n
- SPI_15BITS_SYMBOL \n
- SPI_16BITS_SYMBOL \n */
- SpiSymbolSize_t symbolSize;
- /** \brief Must be use macros HAL_SPI_PACK_PARAMETER(freq_value, valid_delay_value, cons_delay_value). \n
- Where is: \n
- freq_value - spi frequency (Hz) \n
- valid_delay_value - delay between setting CS and clock start (sec) \n
- cons_delay_value - delay between consecutive transfers (sec) \n */
- uint32_t pack_parameter;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || \
- defined(ATMEGA128RFA1) || defined(ATXMEGA128A1) || defined(ATXMEGA256A3) || defined(ATXMEGA256D3)
- /** \brief parameters are valid only for avr:*/
- /** \brief spi data order (set by user). Must be chosen from: \n
- SPI_DATA_MSB_FIRST \n
- SPI_DATA_LSB_FIRST \n */
- SpiDataOrder_t dataOrder;
- /** \brief spi clock rate (set by user). Must be chosen from: \n
- for atmega \n
- SPI_CLOCK_RATE_62 \n
- SPI_CLOCK_RATE_125 \n
- SPI_CLOCK_RATE_250 \n
- SPI_CLOCK_RATE_500 \n
-
- for xmega mcu clock \n
- SPI_CLOCK_RATE_125 (4 MHz) \n
- SPI_CLOCK_RATE_250 (4, 8 MHz) \n
- SPI_CLOCK_RATE_500 (4, 8, 16 MHz) \n
- SPI_CLOCK_RATE_750 (12 MHz ) \n
- SPI_CLOCK_RATE_1000 (4, 8, 16, 32 MHz) \n
- SPI_CLOCK_RATE_1500 (12 MHz) \n
- SPI_CLOCK_RATE_2000 (4, 8, 16, 32 MHz) \n
- SPI_CLOCK_RATE_3000 (12 MHz) \n
- SPI_CLOCK_RATE_4000 (8, 16, 32 MHz) \n
- SPI_CLOCK_RATE_6000 (12 MHz) \n
- SPI_CLOCK_RATE_8000 (16, 32 MHz) \n
- SPI_CLOCK_RATE_16000 (32 MHz) */
- SpiBaudRate_t baudRate;
- /** \brief HAL USART service field - contains variables for HAL USART module
- internal needs */
- HAL_UsartDescriptor_t spiDescriptor;
-#endif
- union
- {
- /** \brief address of the function to notify the application when a transmission was completed. \n
- When the synchronous method is used, callback must be NULL. \n */
- void (* callback)(void);
- /** \brief address of the function to notify the application when a byte was received. \n
- Slave mode uses only asynchronous method. \n */
- void (* slave_callback)(uint16_t);
- };
-} HAL_SpiDescriptor_t;
-
-/**************************************************************************//**
-\brief Open the SPI interface and configure pins.
-\param[in]
- descriptor - pointer to the spi descriptor.
-\return
- -1 - there not are free resources.
- 0 - SPI channel is ready.
-******************************************************************************/
-int HAL_OpenSpi(HAL_SpiDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Close the SPI channel and pins.
-\param[in]
- descriptor - pointer to the spi descriptor.
-\return
- Returns 0 on success or -1 if channel was not opened.
-******************************************************************************/
-int HAL_CloseSpi(HAL_SpiDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Writes a length bytes to the SPI. \n
- Callback function will be used to notify about the finishing transmitting.
- (only for master spi)
-\param[in]
- descriptor - pointer to spi descriptor
-\param[in]
- buffer - pointer to application data buffer;
-\param[in]
- length - number bytes for transfer;
-\return
- -1 - spi module was not opened, there is unsent data, pointer to the data or
- the length are zero; \n
- 0 - on success or a number; \n
- Number of written bytes if the synchronous method is used(callback is NULL), \n
- only for master spi.
-******************************************************************************/
-int HAL_WriteSpi(HAL_SpiDescriptor_t *descriptor, uint8_t *buffer, uint16_t length);
-
-/**************************************************************************//**
-\brief For master : writes a number of bytes to the spi.\n
- Callback function will be used to notify when the activity is finished.\n
- The read data is placed to the buffer. \n
- For slave: reads a number of bytes from internal spi buffer and writes them \n
- to application buffer.
-\param[in]
- descriptor - pointer to HAL_SpiDescriptor_t structure
-\param[in]
- buffer - pointer to the application data buffer
-\param[in]
- length - number of bytes to transfer
-\return
- -1 - spi module was not opened, or there is unsent data, or the pointer to
- data or the length are NULL; \n
- 0 - success for master; \n
- Number of written bytes if the synchronous method is used(callback is NULL) for master \n
- or number of read bytes from internal buffer to the application buffer for slave.
-******************************************************************************/
-int HAL_ReadSpi(HAL_SpiDescriptor_t *descriptor, uint8_t *buffer, uint16_t length);
-
-#endif /* _SPI_H */
-// eof spi.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/uart.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/uart.h
deleted file mode 100644
index a2a52d38..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/uart.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/************************************************************************//**
- \file uart.h
-
- \brief
- UART interface
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 17.11.2010 D. Loskutnikov - Created.
-******************************************************************************/
-#ifndef _UART_H
-#define _UART_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <usart.h>
-#include <halUart.h>
-
-/******************************************************************************
- Functions prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Open UART
-
-\param[in] desc UART descriptor
-\return 1 if success, -1 if error
-******************************************************************************/
-int HAL_OpenUart(HAL_UartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Close UART
-
-\param[in] desc UART descriptor
-\return
-******************************************************************************/
-int HAL_CloseUart(HAL_UartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Send contents of buffer over UART
-
-\param[in] desc UART descriptor
-\param[in] buffer buffer to be sent
-\param[in] length buffer length
-\return number of sent bytes or -1 if error
-******************************************************************************/
-int HAL_WriteUart(HAL_UartDescriptor_t *descriptor, uint8_t *buffer, uint16_t length);
-
-/**************************************************************************//**
-\brief Copy received by UART bytes to user-supplied buffer
-
-\param[in] desc UART descriptor
-\param[in] buffer buffer to store data
-\param[in] length maximum length of buffer
-\return number of actually copied bytes or -1 if error
-******************************************************************************/
-int HAL_ReadUart(HAL_UartDescriptor_t *descriptor, uint8_t *buffer, uint16_t length);
-
-/**************************************************************************//**
-\brief Check if any bytes are pending for transmission over UART
-
-\param[in] desc descriptor
-\return -1 if error, 0 if not, 1 if yes
-******************************************************************************/
-int HAL_IsUartTxEmpty(HAL_UartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Store UART error conditions
-
-\param[in] desc UART descriptor
-\param[in] err error condition
-******************************************************************************/
-void halUartStoreError(HAL_UartDescriptor_t *desc, uint8_t err);
-
-/**************************************************************************//**
-\brief Send byte from FIFO over UART
-
-\param[in] desc UART descriptor
-******************************************************************************/
-void halUartTx(HAL_UartDescriptor_t *desc);
-
-/**************************************************************************//**
-\brief Store received byte to FIFO
-
-\param[in] desc UART descriptor
-******************************************************************************/
-void halUartStoreRx(HAL_UartDescriptor_t *desc);
-
-/**************************************************************************//**
-\brief UART transmission complete handler
-
-\param[in] desc UART descriptor
-******************************************************************************/
-void halSigUartTransmissionComplete(HAL_UartDescriptor_t *desc);
-
-/**************************************************************************//**
-\brief UART reception complete handler
-
-\param[in] desc UART descriptor
-******************************************************************************/
-void halSigUartReceptionComplete(HAL_UartDescriptor_t *desc);
-
-/**************************************************************************//**
-\brief UART error handler
-
-\param[in] desc UART descriptor
-******************************************************************************/
-void halSigUartErrorOccurred(HAL_UartDescriptor_t *desc);
-
-#endif /* _UART_H */
-// eof uart.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/uid.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/uid.h
deleted file mode 100644
index 1adbaeb6..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/uid.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/**************************************************************************//**
- \file uid.h
-
- \brief The header file describes the UID interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 7/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _UID_H
-#define _UID_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-// \cond
-#include <types.h>
-// \endcond
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/************************************************************//**
-\brief UID discovery.
-\param[in]
- id - UID buffer pointer. \n
- Attention! Memory size must equal <i> (Number of devices) * 8 bytes </i>
-\return
- 0 - if UID of DS2411 has been found successfully; \n
- -1 - if some error occured during UID discovery.
-****************************************************************/
-int HAL_ReadUid(uint64_t *id);
-
-#endif /* _UID_H */
-
-// eof uid.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/usart.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/usart.h
deleted file mode 100644
index f81a5de7..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/usart.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/****************************************************************************//**
- \file usart.h
-
- \brief The header file describes the usart interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 22/08/07 A. Khromykh - Created
-*******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-#ifndef _USART_H
-#define _USART_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-// \cond
-#include <halUsart.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define USART_FLOW_CONTROL_NONE 0
-#define USART_FLOW_CONTROL_HARDWARE (1 << 0)
-#define USART_DTR_CONTROL (1 << 1)
-
-#if defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || \
- defined(AT90USB1287) || defined(ATMEGA128RFA1) || defined(ATXMEGA128A1) || \
- defined(ATXMEGA256A3) || defined(ATXMEGA256D3)
- // this define is used only by HAL.
- #define USART_SPI_READ_MODE (1 << 4)
- #define USART_SPI_WRITE_MODE (1 << 3)
-#endif
-// \endcond
-
-/******************************************************************************
- Types section
-******************************************************************************/
-/** \brief Usart descriptor*/
-typedef struct
-{
- /** \brief HAL USART service field - contains variables for HAL USART module
- internal needs */
- HalUsartService_t service;
- /** \brief tty - USART_CHANNEL_n to be used. "n" range depends on the platform.
- Take a look into halUsart.h platform specific file fore more details. */
- UsartChannel_t tty;
- /** \brief Sets synchronous or asynchronous routine. \n
- Must be chosen from: \n
- USART_MODE_ASYNC \n
- USART_MODE_RS485 (only for arm)\n
- USART_MODE_SYNC \n */
- UsartMode_t mode;
- /** \brief baudrate - USART baud rate. Must be chosen from: \n
- USART_BAUDRATE_1200 \n
- USART_BAUDRATE_2400 \n
- USART_BAUDRATE_4800 \n
- USART_BAUDRATE_9600 \n
- USART_BAUDRATE_19200 \n
- USART_BAUDRATE_38400 \n
- USART_SYNC_BAUDRATE_1200 \n
- USART_SYNC_BAUDRATE_2400 \n
- USART_SYNC_BAUDRATE_4800 \n
- USART_SYNC_BAUDRATE_9600 \n
- USART_SYNC_BAUDRATE_38400 \n
- USART_SYNC_BAUDRATE_57600 \n
- USART_SYNC_BAUDRATE_115200 \n */
- UsartBaudRate_t baudrate;
- /** \brief data - USART data length. Must be chosen from: \n
- USART_DATA5 \n
- USART_DATA6 \n
- USART_DATA7 \n
- USART_DATA8 \n */
- UsartData_t dataLength;
- /** \brief parity - USART parity mode. Must be chosen from: \n
- USART_PARITY_NONE \n
- USART_PARITY_EVEN \n
- USART_PARITY_ODD \n */
- UsartParity_t parity;
- /** \brief stopbits - USART stop bits number. Must be chosen from: \n
- USART_STOPBIT_1 \n
- USART_STOPBIT_2 \n */
- UsartStopBits_t stopbits;
- /** \brief edge - data received edge (only for usart). Must be chosen from: \n
- USART_EDGE_MODE_FALLING \n
- USART_EDGE_MODE_RISING \n */
- UsartEdgeMode_t edge;
- /** \brief master or slave on usart (only for usart). Must be chosen from:
- USART_CLK_MODE_MASTER \n
- USART_CLK_MODE_SLAVE \n */
- UsartClkMode_t syncMode;
- /** \brief It's pointer to receive buffer. \n
- If rxBuffer is NULL then transactions are discarded. \n
- Size of buffer depends on user application. */
- uint8_t *rxBuffer;
- /** \brief length of receive buffer */
- uint16_t rxBufferLength;
- /** \brief It's pointer to transmit buffer. \n
- If txBuffer is NULL then callback method is used. \n
- If txBuffer isn't NULL then polling method is used. */
- uint8_t *txBuffer;
- /** \brief length of transmit buffer */
- uint16_t txBufferLength;
- /** \brief It's receive usart callback. \n
- If rxCallback is NULL then polling method is used. \n
- If rxCallback isn't NULL then callback method is used.*/
- void (*rxCallback)(uint16_t);
- /** \brief It's transmitting was completed usart callback. \n
- If txBuffer isn't NULL then txCallback notify about end of bytes sending. */
- void (*txCallback)(void);
- #if defined(_USE_USART_ERROR_EVENT_)
- /** \brief It's error was occurred usart callback. \n
- If receiver error is issued then errCallback notify about issue with reason. \n
- Reason must be: \n
- FRAME_ERROR \n
- DATA_OVERRUN \n
- PARITY_ERROR */
- void (*errCallback)(UsartErrorReason_t);
- #endif
- /** \brief flow control of usart. One of the defines \n
- USART_FLOW_CONTROL_NONE, \n
- USART_FLOW_CONTROL_HARDWARE, USART_DTR_CONTROL, it is possible to combine by logical OR. \n
- RS485 mode needs for USART_FLOW_CONTROL_NONE. \n
- The RTS pin is driven high when the transmitter is operating. */
- uint8_t flowControl;
-} HAL_UsartDescriptor_t;
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Registers usart's event handlers. Performs configuration
-of usart registers. Performs configuration of RTS, CTS and DTR pins.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure
-
-\return
- Returns positive usart descriptor on success or -1 in cases: \n
- - bad usart channel; \n
- - there are not enough resources; \n
-******************************************************************************/
-int HAL_OpenUsart(HAL_UsartDescriptor_t *descriptor);
-
-/*************************************************************************//**
-\brief Releases the usart channel and pins, if hardware flow control was used.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure
-
-\return
- -1 - bad descriptor or channel is already closed; \n
- 0 - success.
-*****************************************************************************/
-int HAL_CloseUsart(HAL_UsartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Writes a number of bytes to usart channel.
-txCallback function will be used to notify when the transmission is finished.
-If hardware flow control is used for transmitting then RTS and DTR pins will
-be tested during transmission.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\param[in]
- buffer - pointer to the application data buffer;
-
-\param[in]
- length - number of bytes to transfer;
-
-\return
- -1 - bad descriptor; \n
- Number of bytes placed to the buffer - success.
-******************************************************************************/
-int HAL_WriteUsart(HAL_UsartDescriptor_t *descriptor, uint8_t *buffer, uint16_t length);
-
-/*************************************************************************//**
-\brief Reads a number of bytes from usart and places them to the buffer.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\param[in]
- buffer - pointer to the application buffer;
-
-\param[in]
- length - number of bytes to be placed to the buffer;
-
-\return
- -1 - bad descriptor, or bad number of bytes to read; \n
- Number of bytes placed to the buffer - success.
-*****************************************************************************/
-int HAL_ReadUsart(HAL_UsartDescriptor_t *descriptor, uint8_t *buffer, uint16_t length);
-
-/**************************************************************************//**
-\brief Forbids the host to transmit data.
-Only USART_CHANNEL_1 can be used for hardware flow control for avr.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\return
- -1 - bad descriptor, bad usart, or unsupported mode; \n
- 0 - success.
-******************************************************************************/
-int HAL_OnUsartCts(HAL_UsartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Allows the host to transmit data.
-Only USART_CHANNEL_1 can be used for hardware flow control for avr.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\return
- -1 - bad descriptor, bad usart, or unsupported mode; \n
- 0 - success.
-******************************************************************************/
-int HAL_OffUsartCts(HAL_UsartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Reads RTS pin state.
-Only USART_CHANNEL_1 can be used for hardware flow control for avr.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\return
- -1 - bad descriptor, bad usart, or unsupported mode; \n
- 0 - RTS is low level; \n
- 1 - RTS is high level;
-******************************************************************************/
-int HAL_ReadUsartRts(HAL_UsartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Reads DTR pin state.
-Only USART_CHANNEL_1 can be used for hardware flow control for avr.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\return
- -1 - bad descriptor, bad usart, or unsupported mode; \n
- 0 - DTR is low level; \n
- 1 - DTR is high level;
-******************************************************************************/
-int HAL_ReadUsartDtr(HAL_UsartDescriptor_t *descriptor);
-
-/**************************************************************************//**
-\brief Checks the status of tx buffer.
-
-\param[in]
- descriptor - pointer to HAL_UsartDescriptor_t structure;
-
-\return
- -1 - bad descriptor, no tx buffer; \n
- 1 - tx buffer is empty; \n
- 0 - tx buffer is not empty;
-******************************************************************************/
-int HAL_IsTxEmpty(HAL_UsartDescriptor_t *descriptor);
-
-#if defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
-/**************************************************************************//**
-\brief Enables DTR wake up.
-
-\param[in]
- callback - pointer to callback method;
-******************************************************************************/
-void HAL_EnableDtrWakeUp(void (* callback)(void));
-
-/**************************************************************************//**
-\brief Disables DTR wake up.
-******************************************************************************/
-void HAL_DisableDtrWakeUp(void);
-#endif
-
-#endif /* _USART_H */
-// eof usart.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/usb.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/usb.h
deleted file mode 100644
index d561d8b5..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/usb.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/**************************************************************************//**
- \file usb.h
-
- \brief The header file describes the usb interface
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 17/07/08 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _USB_H
-#define _USB_H
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-// \cond
-// USB device API return values
-// Indicates the operation was successful
-#define STATUS_SUCCESS 0
-// Endpoint/device is already busy
-#define STATUS_BUSY 1
-// Operation has been aborted
-#define STATUS_ABORTED 2
-// Operation has been aborted because the device was configured
-#define STATUS_RESET 3
-
-// USB device states
-// The device is currently suspended
-#define DEVICE_SUSPENDED 0
-// USB cable is plugged into the device
-#define DEVICE_ATTACHED 1
-// Host is providing +5V through the USB cable
-#define DEVICE_POWERED 2
-// Device has been reset
-#define DEVICE_DEFAULT 3
-// The device has been given an address on the bus
-#define DEVICE_ADDRESS 5
-// A valid configuration has been selected
-#define DEVICE_CONFIGURED 6
-// \endcond
-
-/******************************************************************************
- Types section
-******************************************************************************/
-// transaction callback type
-typedef void (* TransferCallback_t)(void *pArg, uint8_t status, uint16_t transferred, uint16_t remaining);
-
-BEGIN_PACK
-// Usb endpoint descriptor
-typedef struct PACK
-{
- uint8_t bLength; // Size of the descriptor in bytes
- uint8_t bDescriptorType; // Descriptor type
- uint8_t bEndpointAddress; // Address and direction of the endpoint
- uint8_t bmAttributes; // Endpoint type and additional characteristics (for isochronous endpoints)
- uint16_t wMaxPacketSize; // Maximum packet size (in bytes) of the endpoint
- uint8_t bInterval; // Polling rate of the endpoint
-} HAL_UsbEndPointDescptr_t;
-END_PACK
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/**************************************************************************//**
-\brief Registers user's request handler
-
-\param[in]
- f - pointer to user's callback
-******************************************************************************/
-void HAL_RegisterRequestHandler(void (* f)(uint8_t *req));
-
-/**************************************************************************//**
-\brief Registers user's end of bus reset handler
-
-\param[in]
- f - pointer to user's callback
-******************************************************************************/
-void HAL_RegisterEndOfBusResetHandler(void (* f)(void));
-
-/**************************************************************************//**
-\brief Registers user's resume handler
-
-\param[in]
- f - pointer to user's callback
-******************************************************************************/
-void HAL_RegisterResumeHandler(void (* f)(void));
-
-/**************************************************************************//**
-\brief Registers user's suspend handler
-
-\param[in]
- f - pointer to user's callback
-******************************************************************************/
-void HAL_RegisterSuspendHandler(void (* f)(void));
-
-/**************************************************************************//**
-\brief Configures an endpoint according to its Endpoint Descriptor.
-
-\param[in]
- descriptor - Pointer to an Endpoint descriptor.
-******************************************************************************/
-void HAL_ConfigureEndpoint(HAL_UsbEndPointDescptr_t *descriptor);
-
-/**************************************************************************//**
-\brief Sends data through a USB endpoint. Sets up the transfer descriptor,
-writes one or two data payloads (depending on the number of FIFO bank
-for the endpoint) and then starts the actual transfer. The operation is
-complete when all the data has been sent.
-
-*If the size of the buffer is greater than the size of the endpoint
-(or twice the size if the endpoint has two FIFO banks), then the buffer
-must be kept allocated until the transfer is finished*. This means that
-it is not possible to declare it on the stack (i.e. as a local variable
-of a function which returns after starting a transfer).
-
-\param[in]
- eptnum - Endpoint number.
-\param[in]
- data - Pointer to a buffer with the data to send.
-\param[in]
- size - Size of the data buffer.
-\param[in]
- callback - Optional callback function to invoke when the transfer is complete.
-\param[in]
- argument - Optional argument to the callback function.
-
-\return
- STATUS_SUCCESS if the transfer has been started; otherwise, the
- corresponding error status code.
-******************************************************************************/
-uint8_t HAL_UsbWrite(uint8_t eptnum, void *data, uint32_t size, TransferCallback_t callback, void *argument);
-
-/**************************************************************************//**
-\brief Reads incoming data on an USB endpoint This methods sets the transfer
-descriptor and activate the endpoint interrupt. The actual transfer is
-then carried out by the endpoint interrupt handler. The Read operation
-finishes either when the buffer is full, or a short packet (inferior to
-endpoint maximum size) is received.
-
-*The buffer must be kept allocated until the transfer is finished*.
-
-\param[in]
- eptnum - Endpoint number.
-\param[in]
- data - Pointer to a data buffer.
-\param[in]
- size - Size of the data buffer in bytes.
-\param[in]
- callback - Optional end-of-transfer callback function.
-\param[in]
- argument - Optional argument to the callback function.
-
-\return
- STATUS_SUCCESS if the read operation has been started; otherwise,
- the corresponding error code.
-******************************************************************************/
-uint8_t HAL_UsbRead(uint8_t eptnum, void *data, uint32_t size, TransferCallback_t callback, void *argument);
-
-/**************************************************************************//**
-\brief Sets the HALT feature on the given endpoint (if not already in this state).
-
-\param[in]
- eptnum - Endpoint number.
-******************************************************************************/
-void HAL_Halt(uint8_t eptnum);
-
-/**************************************************************************//**
-\brief Clears the Halt feature on the given endpoint.
-
-\param[in]
- eptnum - Endpoint number.
-******************************************************************************/
-void HAL_Unhalt(uint8_t eptnum);
-
-/**************************************************************************//**
-\brief Returns the current Halt status of an endpoint.
-
-\param[in]
- eptnum - Endpoint number.
-
-\return
- 1 - if the endpoint is currently halted;
- 0 - otherwise.
-******************************************************************************/
-uint8_t HAL_IsHalted(uint8_t eptnum);
-
-/**************************************************************************//**
-\brief Causes the given endpoint to acknowledge the next packet it receives with
-a STALL handshake.
-
-\param[in]
- eptnum - Endpoint number.
-
-\return
- STATUS_SUCCESS or STATUS_BUSY.
-******************************************************************************/
-uint8_t HAL_Stall(uint8_t eptnum);
-
-/**************************************************************************//**
-\brief Sets the device address to the given value.
-
-\param[in]
- address - New device address.
-******************************************************************************/
-void HAL_SetAddress(uint8_t *address);
-
-/**************************************************************************//**
-\brief Sets the current device configuration.
-
-\param[in]
- cfgnum - Configuration number to set.
-******************************************************************************/
-void HAL_SetConfiguration(uint8_t cfgnum);
-
-/**************************************************************************//**
-\brief Initializes the USB driver. This function must be called before host
-bus reset and after pull up is connected to D+. After pull up was connected
-to D+ host resets device with 100ms delay.
-
-\param[in]
- reqMem - Memory for usb request. Memory is allocated by user.
-******************************************************************************/
-void HAL_UsbInit(uint8_t *reqMem);
-
-/**************************************************************************//**
-\brief Returns the current state of the USB device.
-
-\return
- Device current state.
-******************************************************************************/
-uint8_t HAL_GetState(void);
-
-#endif /* _USB_H */
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/w1.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/w1.h
deleted file mode 100644
index 7f26d39c..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/w1.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/**************************************************************************//**
- \file w1.h
-
- \brief The header file describes the 1-Wire interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _W1_H
-#define _W1_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halW1.h>
-
-/******************************************************************************
- Define(s) section
-******************************************************************************/
-#define W1_ANY_FAMILY 0x00
-#define DS2411 0x01
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/*************************************************************************//**
-\brief 1-Wire search procedure with search ROM command only
-\param[in]
- family - 8-bit family code.
-\param[in]
- data - pointer of SRAM where the 8-bytes ROM codes returned by the
- devices are stored. \n
- Attention! Memory size must be equal to (Number of devices) * 8 bytes
-\param[in]
- count - number of devices we wish to find.
-\param[in]
- actCount - number of devices actually found.
-\return
- W1_SUCCESS_STATUS - if at least one device has been found. \n
- W1_NO_DEVICE_STATUS - if there are no any devices presented
- on the bus with specified family code. \n
- W1_INVALID_CRC - if an invalid CRC has been read during the search and
- no devices with specified family code was found.
-******************************************************************************/
-W1Status_t HAL_SearchW1Device(uint8_t family,
- uint8_t *data,
- uint8_t count,
- uint8_t *actCount);
-
-/**************************************************************************//**
-\brief 1-Wire search procedure with alarm search command only
-\param[in]
- family - 8-bit family code.
-\param[in]
- data - pointer of SRAM where the 8-bytes ROM codes returned by the
- devices are stored. \n
-\param[in]
- count - number of devices we wish to find.
-\param[in]
- actCount - number of devices actually found.
-\return
- W1_SUCCESS_STATUS - if at least one device has been found. \n
- W1_NO_DEVICE_STATUS - if there are no any devices presented
- on the bus with specified family code. \n
- W1_INVALID_CRC - if an invalid CRC has been read during the search and
- no devices with specified family code was found.
-******************************************************************************/
-W1Status_t HAL_AlarmSearchW1Device(uint8_t family,
- uint8_t *data,
- uint8_t count,
- uint8_t *actCount);
-
-/***************************************************************************//**
-\brief Resets all devices connected to the bus.
-\return
- 0 - there are some devices at the bus. \n
- 1 - there are no devices at the bus.
-*******************************************************************************/
-uint8_t HAL_ResetW1(void);
-
-/***************************************************************************//**
-\brief Writes a single byte to the bus
-\param[in]
- value - byte to write.
-*******************************************************************************/
-void HAL_WriteW1(uint8_t value);
-
-/***************************************************************************//**
-\brief Reads a single byte from the bus.
-\return
- byte read from the bus.
-*******************************************************************************/
-uint8_t HAL_ReadW1(void);
-
-#endif /* _W1_H */
-// eof w1.h
diff --git a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/wdtCtrl.h b/digital/beacon/src/Bitcloud_stack/Components/HAL/include/wdtCtrl.h
deleted file mode 100644
index 06d259ae..00000000
--- a/digital/beacon/src/Bitcloud_stack/Components/HAL/include/wdtCtrl.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/**************************************************************************//**
- \file wdtCtrl.h
-
- \brief The header file describes the WDT interface.
-
- \author
- Atmel Corporation: http://www.atmel.com \n
- Support email: avr@atmel.com
-
- Copyright (c) 2008-2011, Atmel Corporation. All rights reserved.
- Licensed under Atmel's Limited License Agreement (BitCloudTM).
-
- \internal
- History:
- 10/12/07 A. Khromykh - Created
- ******************************************************************************/
-/******************************************************************************
- * WARNING: CHANGING THIS FILE MAY AFFECT CORE FUNCTIONALITY OF THE STACK. *
- * EXPERT USERS SHOULD PROCEED WITH CAUTION. *
- ******************************************************************************/
-
-#ifndef _WDTCTRL_H
-#define _WDTCTRL_H
-
-/******************************************************************************
- Includes section
-******************************************************************************/
-#include <halWdt.h>
-
-/******************************************************************************
- Types section
-******************************************************************************/
-// \cond
-// an interval before WDT will expire
-#if defined(AT91SAM7X256)
- typedef enum
- {
- WDT_INTERVAL_4 = 0xFFE, // 4 ms
- WDT_INTERVAL_16 = 0xFFB, // 16 ms
- WDT_INTERVAL_32 = 0xFF9, // 32 ms
- WDT_INTERVAL_64 = 0xFEF, // 64 ms
- WDT_INTERVAL_125 = 0xFDF, // 125 ms
- WDT_INTERVAL_250 = 0xFBF, // 250 ms
- WDT_INTERVAL_500 = 0xF7F, // 500 ms
- WDT_INTERVAL_1000 = 0xEFF, // 1 second
- WDT_INTERVAL_2000 = 0xDFF, // 2 seconds
- WDT_INTERVAL_4000 = 0xBFF, // 4 seconds
- WDT_INTERVAL_8000 = 0x7FF // 8 seconds
- } HAL_WdtInterval_t;
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
- typedef enum
- {
- WDT_INTERVAL_16 = 0x00, // 16 ms
- WDT_INTERVAL_32 = 0x01, // 32 ms
- WDT_INTERVAL_64 = 0x02, // 64 ms
- WDT_INTERVAL_125 = 0x03, // 125 ms
- WDT_INTERVAL_250 = 0x04, // 250 ms
- WDT_INTERVAL_500 = 0x05, // 500 ms
- WDT_INTERVAL_1000 = 0x06, // 1 second
- WDT_INTERVAL_2000 = 0x07, // 2 seconds
- WDT_INTERVAL_4000 = 0x20, // 4 seconds
- WDT_INTERVAL_8000 = 0x21 // 8 seconds
- }HAL_WdtInterval_t;
-#endif
-// \endcond
-
-/******************************************************************************
- Prototypes section
-******************************************************************************/
-/***************************************************************************//**
-\brief Starts WDT within a given interval.
-
-\param[in]
- interval - interval. Must be chosen from: \n
- WDT_INTERVAL_16 // 16 ms \n
- WDT_INTERVAL_32 // 32 ms \n
- WDT_INTERVAL_64 // 64 ms \n
- WDT_INTERVAL_125 // 125 ms \n
- WDT_INTERVAL_250 // 250 ms \n
- WDT_INTERVAL_500 // 500 ms \n
- WDT_INTERVAL_1000 // 1 second \n
- WDT_INTERVAL_2000 // 2 seconds \n
- WDT_INTERVAL_4000 // 4 seconds \n
- WDT_INTERVAL_8000 // 8 seconds \n
-*******************************************************************************/
-void HAL_StartWdt(HAL_WdtInterval_t interval);
-
-/***************************************************************************//**
-\brief Registers WDT fired callback.
-
-\param[in]
- wdtCallback - pointer to the callback function.
-*******************************************************************************/
-void HAL_RegisterWdtCallback(void (*wdtCallback)(void));
-
-/******************************************************************************
- Inline static functions section
-******************************************************************************/
-#if defined(AT91SAM7X256)
-/**************************************************************************//**
-\brief reset and reload wdt counter
-******************************************************************************/
-INLINE void HAL_ResetWdt(void)
-{
- halResetWdt();
-}
-
-#elif defined(ATMEGA1281) || defined(ATMEGA2561) || defined(ATMEGA1284) || defined(AT90USB1287) || defined(ATMEGA128RFA1)
-/*******************************************************************//**
-\brief stops the WDT
-***********************************************************************/
-#define HAL_StopWdt() wdt_disable()
-
-/*******************************************************************//**
-\brief resets the WDT
-***********************************************************************/
-#define HAL_ResetWdt() wdt_reset()
-#endif
-
-#endif /*_WDTCTRL_H*/
-
-// eof wdtCtrl.h