summaryrefslogtreecommitdiff
path: root/digital/avr/modules/usb/lufa/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
diff options
context:
space:
mode:
Diffstat (limited to 'digital/avr/modules/usb/lufa/Projects/AVRISP_Programmer/Sample_Programming_Session.txt')
-rw-r--r--digital/avr/modules/usb/lufa/Projects/AVRISP_Programmer/Sample_Programming_Session.txt104
1 files changed, 104 insertions, 0 deletions
diff --git a/digital/avr/modules/usb/lufa/Projects/AVRISP_Programmer/Sample_Programming_Session.txt b/digital/avr/modules/usb/lufa/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
new file mode 100644
index 00000000..b5af76eb
--- /dev/null
+++ b/digital/avr/modules/usb/lufa/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
@@ -0,0 +1,104 @@
+ubuntu@ubuntu:~/LUFA/Bootloaders/LUFA_DFU_Bootloader_AT90USB162$ sudo avrdude -vv -F -P /dev/ttyACM0 -c avr910 -p usb162 -U flash:w:BootloaderDFU.hex
+
+avrdude: Version 5.5, compiled on May 9 2008 at 13:04:46
+ Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
+
+ System wide configuration file is "/etc/avrdude.conf"
+ User configuration file is "/home/ubuntu/.avrduderc"
+ User configuration file does not exist or is not a regular file, skipping
+
+ Using Port : /dev/ttyACM0
+ Using Programmer : avr910
+ AVR Part : AT90USB162
+ Chip Erase delay : 9000 us
+ PAGEL : PD7
+ BS2 : PA0
+ RESET disposition : dedicated
+ RETRY pulse : SCK
+ serial program mode : yes
+ parallel program mode : yes
+ Timeout : 200
+ StabDelay : 100
+ CmdexeDelay : 25
+ SyncLoops : 32
+ ByteDelay : 0
+ PollIndex : 3
+ PollValue : 0x53
+ Memory Detail :
+
+ Block Poll Page Polled
+ Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
+ ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
+ eeprom 65 10 8 0 no 512 4 0 9000 9000 0x00 0x00
+ flash 65 6 128 0 yes 16384 128 128 4500 4500 0x00 0x00
+ lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
+ hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
+ efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
+ lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
+ calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
+ signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
+
+ Programmer Type : avr910
+ Description : Atmel Low Cost Serial Programmer
+
+Found programmer: Id = "AVR ISP"; type = S
+ Software Version = 2.3; Hardware Version = 1.0
+Programmer supports auto addr increment.
+
+Programmer supports the following devices:
+ Device code: 0x55 = ATtiny12
+ Device code: 0x56 = ATtiny15
+ Device code: 0x5e = ATtiny2313
+ Device code: 0x76 = ATMEGA8
+ Device code: 0x74 = ATMEGA6450
+ Device code: 0x72 = ATMEGA32
+ Device code: 0x45 = ATMEGA64
+ Device code: 0x74 = ATMEGA6450
+ Device code: 0x43 = ATMEGA128
+ Device code: 0x63 = ATMEGA162
+ Device code: 0x78 = ATMEGA169
+ Device code: 0x6c = AT90S4434
+ Device code: 0x38 = AT90S8515
+ Device code: 0x65 = (unknown)
+
+avrdude: warning: selected device is not supported by programmer: usb162
+avrdude: AVR device initialized and ready to accept instructions
+
+Reading | ################################################## | 100% 0.00s
+
+avrdude: Device signature = 0x1e9482
+avrdude: safemode: lfuse reads as 5E
+avrdude: safemode: hfuse reads as D9
+avrdude: safemode: efuse reads as F4
+avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
+ To disable this feature, specify the -D option.
+avrdude: erasing chip
+avrdude: reading input file "BootloaderDFU.hex"
+avrdude: input file BootloaderDFU.hex auto detected as Intel Hex
+avrdude: writing flash (16066 bytes):
+
+Writing | ################################################## | 100% 33.39s
+
+
+
+avrdude: 16066 bytes of flash written
+avrdude: verifying flash memory against BootloaderDFU.hex:
+avrdude: load data flash data from input file BootloaderDFU.hex:
+avrdude: input file BootloaderDFU.hex auto detected as Intel Hex
+avrdude: input file BootloaderDFU.hex contains 16066 bytes
+avrdude: reading on-chip flash data:
+
+Reading | ################################################## | 100% 16.07s
+
+
+
+avrdude: verifying ...
+avrdude: 16066 bytes of flash verified
+
+avrdude: safemode: lfuse reads as 5E
+avrdude: safemode: hfuse reads as D9
+avrdude: safemode: efuse reads as F4
+avrdude: safemode: Fuses OK
+
+avrdude done. Thank you.
+