summaryrefslogtreecommitdiff
path: root/digital/avr/modules/usb/lufa/Demos/StillImageHost/StillImageCommands.c
diff options
context:
space:
mode:
Diffstat (limited to 'digital/avr/modules/usb/lufa/Demos/StillImageHost/StillImageCommands.c')
-rw-r--r--digital/avr/modules/usb/lufa/Demos/StillImageHost/StillImageCommands.c273
1 files changed, 273 insertions, 0 deletions
diff --git a/digital/avr/modules/usb/lufa/Demos/StillImageHost/StillImageCommands.c b/digital/avr/modules/usb/lufa/Demos/StillImageHost/StillImageCommands.c
new file mode 100644
index 00000000..969ff5af
--- /dev/null
+++ b/digital/avr/modules/usb/lufa/Demos/StillImageHost/StillImageCommands.c
@@ -0,0 +1,273 @@
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Still Image Device commands, to issue PIMA commands to the device for
+ * reading device status, capacity, and other characteristics as well as
+ * reading and writing of stored image data.
+ */
+
+#include "StillImageCommands.h"
+
+/* Globals: */
+/** PIMA block container for the block to send to the device */
+PIMA_Container_t PIMA_SendBlock;
+
+/** PIMA block container for the last received block from the device */
+PIMA_Container_t PIMA_ReceivedBlock;
+
+/** PIMA block container for the last event block received from the device */
+PIMA_Container_t PIMA_EventBlock;
+
+
+/** Function to send the PIMA command container to the attached still image device. */
+void SImage_SendBlockHeader(void)
+{
+ /* Unfreeze the data OUT pipe ready for data transmission */
+ Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
+ Pipe_Unfreeze();
+
+ /* Write the PIMA block to the data OUT pipe */
+ Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0));
+
+ /* If the block type is a command, send its parameters (if any) */
+ if (PIMA_SendBlock.Type == CType_CommandBlock)
+ {
+ /* Determine the size of the parameters in the block via the data length attribute */
+ uint8_t ParamBytes = (PIMA_SendBlock.DataLength - PIMA_COMMAND_SIZE(0));
+
+ /* Check if any parameters in the command block */
+ if (ParamBytes)
+ {
+ /* Write the PIMA parameters to the data OUT pipe */
+ Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes);
+ }
+
+ /* Send the PIMA command block to the attached device */
+ Pipe_ClearCurrentBank();
+ }
+
+ /* Freeze pipe after use */
+ Pipe_Freeze();
+}
+
+/** Function to receive a PIMA event container from the attached still image device. */
+void SImage_RecieveEventHeader(void)
+{
+ /* Unfreeze the events pipe */
+ Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
+ Pipe_Unfreeze();
+
+ /* Read in the event data into the global structure */
+ Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock));
+
+ /* Clear the pipe after read complete to prepare for next event */
+ Pipe_ClearCurrentBank();
+
+ /* Freeze the event pipe again after use */
+ Pipe_Freeze();
+}
+
+/** Function to receive a PIMA response container from the attached still image device. */
+uint8_t SImage_RecieveBlockHeader(void)
+{
+ uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
+
+ /* Unfreeze the data IN pipe */
+ Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
+ Pipe_Unfreeze();
+
+ /* Wait until data received on the IN pipe */
+ while (!(Pipe_ReadWriteAllowed()))
+ {
+ /* Check to see if a new frame has been issued (1ms elapsed) */
+ if (USB_INT_HasOccurred(USB_INT_HSOFI))
+ {
+ /* Clear the flag and decrement the timout period counter */
+ USB_INT_Clear(USB_INT_HSOFI);
+ TimeoutMSRem--;
+
+ /* Check to see if the timeout period for the command has elapsed */
+ if (!(TimeoutMSRem))
+ {
+ /* Return error code */
+ return PIPE_RWSTREAM_ERROR_Timeout;
+ }
+ }
+
+ Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
+
+ /* Check if pipe stalled (command failed by device) */
+ if (Pipe_IsStalled())
+ {
+ /* Clear the stall condition on the OUT pipe */
+ SImage_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);
+
+ /* Return error code and break out of the loop */
+ return PIPE_RWSTREAM_ERROR_PipeStalled;
+ }
+
+ Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
+
+ /* Check if pipe stalled (command failed by device) */
+ if (Pipe_IsStalled())
+ {
+ /* Clear the stall condition on the IN pipe */
+ SImage_ClearPipeStall(SIMAGE_DATA_IN_PIPE);
+
+ /* Return error code */
+ return PIPE_RWSTREAM_ERROR_PipeStalled;
+ }
+
+ /* Check to see if the device was disconnected, if so exit function */
+ if (!(USB_IsConnected))
+ {
+ /* Return error code */
+ return PIPE_RWSTREAM_ERROR_DeviceDisconnected;
+ }
+ };
+
+ /* Freeze OUT pipe after use */
+ Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
+ Pipe_Freeze();
+
+ /* Select the IN data pipe for data reception */
+ Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
+
+ /* Load in the response from the attached device */
+ Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0));
+
+ /* Check if the returned block type is a response block */
+ if (PIMA_ReceivedBlock.Type == CType_ResponseBlock)
+ {
+ /* Determine the size of the parameters in the block via the data length attribute */
+ uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
+
+ /* Check if the device has returned any parameters */
+ if (ParamBytes)
+ {
+ /* Read the PIMA parameters from the data IN pipe */
+ Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes);
+ }
+
+ /* Clear pipe bank after use */
+ Pipe_ClearCurrentBank();
+ }
+
+ /* Freeze the IN pipe after use */
+ Pipe_Freeze();
+
+ return PIPE_RWSTREAM_ERROR_NoError;
+}
+
+/** Function to send the given data to the device, after a command block has been issued.
+ *
+ * \param Buffer Source data buffer to send to the device
+ * \param Bytes Number of bytes to send
+ */
+void SImage_SendData(void* Buffer, uint16_t Bytes)
+{
+ /* Unfreeze the data OUT pipe */
+ Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
+ Pipe_Unfreeze();
+
+ /* Write the data contents to the pipe */
+ Pipe_Write_Stream_LE(Buffer, Bytes);
+
+ /* Freeze the pipe again after use */
+ Pipe_Freeze();
+}
+
+/** Function to receive the given data to the device, after a response block has been received.
+ *
+ * \param Buffer Destination data buffer to put read bytes from the device
+ * \param Bytes Number of bytes to receive
+ *
+ * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
+ */
+uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes)
+{
+ uint8_t ErrorCode;
+
+ /* Unfreeze the data IN pipe */
+ Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
+ Pipe_Unfreeze();
+
+ /* Read in the data into the buffer */
+ ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes);
+
+ /* Freeze the pipe again after use */
+ Pipe_Freeze();
+
+ return ErrorCode;
+}
+
+/** Function to test if a PIMA event block is waiting to be read in from the attached device.
+ *
+ * \return True if an event is waiting to be read in from the device, false otherwise
+ */
+bool SImage_IsEventReceived(void)
+{
+ bool IsEventReceived = false;
+
+ /* Unfreeze the Event pipe */
+ Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
+ Pipe_Unfreeze();
+
+ /* If the pipe contains data, an event has been received */
+ if (Pipe_BytesInPipe())
+ IsEventReceived = true;
+
+ /* Freeze the pipe after use */
+ Pipe_Freeze();
+
+ return IsEventReceived;
+}
+
+/** Clears the stall condition in the attached device on the nominated endpoint number.
+ *
+ * \param EndpointNum Endpoint number in the attached device whose stall condition is to be cleared
+ *
+ * \return A value from the USB_Host_SendControlErrorCodes_t enum
+ */
+uint8_t SImage_ClearPipeStall(const uint8_t PipeEndpointNum)
+{
+ USB_HostRequest = (USB_Host_Request_Header_t)
+ {
+ bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
+ bRequest: REQ_ClearFeature,
+ wValue: FEATURE_ENDPOINT_HALT,
+ wIndex: PipeEndpointNum,
+ wLength: 0,
+ };
+
+ return USB_Host_SendControlRequest(NULL);
+}