aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/l1/stm32l-discovery/button-irq-printf/main.c
blob: 82a34344c1d89ba176cf3d04533d6545d7cfc3f2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2012 Karl Palsson <karlp@tweak.net.au>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <libopencm3/cm3/nvic.h>
#include <libopencm3/stm32/l1/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/exti.h>
#include <libopencm3/stm32/timer.h>
#include <libopencm3/stm32/usart.h>

#include "syscfg.h"

static struct state_t state;

void clock_setup(void)
{
	rcc_clock_setup_pll(&clock_config[CLOCK_VRANGE1_HSI_PLL_24MHZ]);
	/* Lots of things on all ports... */
	rcc_peripheral_enable_clock(&RCC_AHBENR, RCC_AHBENR_GPIOAEN);
	rcc_peripheral_enable_clock(&RCC_AHBENR, RCC_AHBENR_GPIOBEN);

	/* Enable clocks for USART2. */
	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);

	/* And timers. */
	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_TIM6EN);
	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_TIM7EN);

}

void gpio_setup(void)
{
	/* green led for ticking, blue for button feedback */
	gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_DISCO_GREEN_PIN);
	gpio_mode_setup(LED_DISCO_BLUE_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_DISCO_BLUE_PIN);

	/* Setup GPIO pins for USART2 transmit. */
	gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2);

	/* Setup USART2 TX pin as alternate function. */
	gpio_set_af(GPIOA, GPIO_AF7, GPIO2);
}

void usart_setup(void)
{
	usart_set_baudrate(USART_CONSOLE, 115200);
	usart_set_databits(USART_CONSOLE, 8);
	usart_set_stopbits(USART_CONSOLE, USART_STOPBITS_1);
	usart_set_mode(USART_CONSOLE, USART_MODE_TX);
	usart_set_parity(USART_CONSOLE, USART_PARITY_NONE);
	usart_set_flow_control(USART_CONSOLE, USART_FLOWCONTROL_NONE);

	/* Finally enable the USART. */
	usart_enable(USART_CONSOLE);
}

/**
 * Use USART_CONSOLE as a console.
 * @param file
 * @param ptr
 * @param len
 * @return
 */
int _write(int file, char *ptr, int len)
{
	int i;

	if (file == STDOUT_FILENO || file == STDERR_FILENO) {
		for (i = 0; i < len; i++) {
			if (ptr[i] == '\n') {
				usart_send_blocking(USART_CONSOLE, '\r');
			}
			usart_send_blocking(USART_CONSOLE, ptr[i]);
		}
		return i;
	}
	errno = EIO;
	return -1;
}

void BUTTON_DISCO_USER_isr(void)
{
	exti_reset_request(BUTTON_DISCO_USER_EXTI);
	if (state.falling) {
		gpio_clear(LED_DISCO_BLUE_PORT, LED_DISCO_BLUE_PIN);
		state.falling = false;
		exti_set_trigger(BUTTON_DISCO_USER_EXTI, EXTI_TRIGGER_RISING);
		unsigned int x = TIM_CNT(TIM7);
		printf("held: %u ms\n", x);
	} else {
		gpio_set(LED_DISCO_BLUE_PORT, LED_DISCO_BLUE_PIN);
		printf("Pushed down!\n");
		TIM_CNT(TIM7) = 0;
		state.falling = true;
		exti_set_trigger(BUTTON_DISCO_USER_EXTI, EXTI_TRIGGER_FALLING);
	}
}

static volatile int t6ovf = 0;

void tim6_isr(void)
{
	TIM_SR(TIM6) &= ~TIM_SR_UIF;
	if (t6ovf++ > 1000) {
		printf("TICK %d\n", state.tickcount++);
		t6ovf = 0;
		gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN);
	}
}

/*
 * Another ms timer, this one used to generate an overflow interrupt at 1ms
 * It is used to toggle leds and write tick counts
 */
void setup_tim6(void)
{
	timer_reset(TIM6);
	// 24Mhz / 10khz -1.
	timer_set_prescaler(TIM6, 2399); // 24Mhz/10000hz - 1
	// 10khz for 10 ticks = 1 khz overflow = 1ms overflow interrupts
	timer_set_period(TIM6, 10);

	nvic_enable_irq(NVIC_TIM6_IRQ);
	timer_enable_update_event(TIM6); // default at reset!
	timer_enable_irq(TIM6, TIM_DIER_UIE);
	timer_enable_counter(TIM6);
}

/*
 * Free running ms timer.
 */
void setup_tim7(void)
{
	timer_reset(TIM7);
	timer_set_prescaler(TIM7, 23999); // 24Mhz/1000hz - 1
	timer_set_period(TIM7, 0xffff);
	timer_enable_counter(TIM7);
}

void setup_buttons(void)
{
	/* Enable EXTI0 interrupt. */
	nvic_enable_irq(BUTTON_DISCO_USER_NVIC);

	gpio_mode_setup(BUTTON_DISCO_USER_PORT, GPIO_MODE_INPUT, GPIO_PUPD_NONE, BUTTON_DISCO_USER_PIN);

	/* Configure the EXTI subsystem. */
	exti_select_source(BUTTON_DISCO_USER_EXTI, BUTTON_DISCO_USER_PORT);
	state.falling = false;
	exti_set_trigger(BUTTON_DISCO_USER_EXTI, EXTI_TRIGGER_RISING);
	exti_enable_request(BUTTON_DISCO_USER_EXTI);
}

int main(void)
{
	clock_setup();
	gpio_setup();
	usart_setup();
	printf("hi guys!\n");
	setup_buttons();
	setup_tim6();
	setup_tim7();
	while (1) {
		;
	}

	return 0;
}